Commit Graph

33129 Commits

Author SHA1 Message Date
Maxime Ripard
fd8133b725 sunxi: Add CHIP support
The C.H.I.P. is a small SBC with an Allwinner R8, 8GB of NAND, 512MB of
RAM, USB host and OTG, a wifi / bluetooth combo chip, an audio/video jack
and two connectors to plug additional boards on top of it.

The DT is identical to the DT submitted to the upstream kernel.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-10-20 22:48:29 +02:00
Maxime Ripard
862ba7ed32 axp209: Sync the DTSI with the kernel
Linux had a number of changes to the AXP209 DTSI. Sync ours.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-10-20 22:48:29 +02:00
Maxime Ripard
f0e8e8dacf sun5i: Sync the DTSI with the kernel
Add the latest kernel changes to the sun5i family DTSI.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-10-20 22:48:28 +02:00
Maxime Ripard
44c798799f sunxi: Use Kconfig CONFIG_MMC
Not all sunxi boards have an MMC embedded. Switching to the Kconfig option
will allow to enable or disable the support in each boards' defconfig.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-10-20 22:48:28 +02:00
Maxime Ripard
f7d6b3cc16 sunxi: board: Only try to use the MMC related functions if enabled
So far, even if CONFIG_MMC was not enabled the board code was trying to use
the MMC-related functions, resulting in linker errors.

Protect those calls by an ifdef.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-10-20 22:48:28 +02:00
Maxime Ripard
7a777f6d6f mmc: Add generic Kconfig option
Add a generic Kconfig option for the CONFIG_MMC option that was used before
in the configuration headers.

Since all the architectures need to be converted to that first, depend on
an non-existent config option that will be extended with architectures that
use that option.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-10-20 22:48:28 +02:00
Maxime Ripard
4adef27013 fastboot: Implement OEM format only when we have MMC support
The current fastboot support assumes that CONFIG_FASTBOOT_FLASH implies
that we have an MMC in our system, which might not be the case if we have
some other storage device.

Change the configuration option protecting that call to
FASTBOOT_FLASH_MMC_DEV, that makes much more sense.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-10-20 22:48:28 +02:00
Maxime Ripard
bac83fb09c sunxi: Add support for android boot image
When using the fastboot boot command, the image sent to U-Boot will be an
Android boot image. If the support is missing, that obviously won't work,
so we need it in our configuration.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-10-20 22:48:28 +02:00
Hans de Goede
fc01daee8b sunxi: Add defconfig for the Sinovoip BPI-M2 board
The Sinovoip BPI-M2 is a SBC board based on the A31s SoC it features
1G RAM, a microsd slot, Gbit ethernet, 4 usb-a USB-2 ports, ir receiver,
stereo headphone jack and hdmi video output.

The dts changes are identical to the dts files submitted upstream.

A few notes on the use if dldo and aldo regulators. DLDO1 is used
for Vdd for the ethernet phy, ALDO2 is used for AVdd for the ethernet
phy. ALDO1 is used to power the sdio wifi module.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-20 18:40:28 +02:00
Hans de Goede
b1e8b577c8 sunxi: Fix sorting of boards in MAINTAINERS
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-20 18:40:28 +02:00
Hans de Goede
3b82402597 sunxi: Add a bootcmd_sunxi_compat to the default environment to boot old kernels
Add a bootcmd_sunxi_compat value to the default environment when building
with CONFIG_OLD_SUNXI_KERNEL_COMPAT, this way people who occasionally want
to boot an old kernel can do so by simply typing "run bootcmd_sunxi_compat"
rather then needing to have 2 separate setups / sdcards for old and
new kernels.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-20 18:40:28 +02:00
Hans de Goede
a29c32be6c sunxi: power: Columbus: only enable ELDO3 when necessary
ELDO3 is only necessary when using the lcd-panel, and not when using hdmi,
the display code already takes care of enabling ELDO3 when necessary,
so there is no need to permanently enable it in the deconfig.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-20 18:40:28 +02:00
Hans de Goede
02cc27c74f sunxi: power: Change axp209 LDO3 and LDO4 default to disabled
LDO3 and LDO4 are normally either unused, or used to power csi
attached camera sensors, and as such do not need to be enabled at
boot time.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-20 18:40:27 +02:00
Hans de Goede
beba401f02 sunxi: power: Add support for disabling axp209 regulators
Add support for disabling the regulators found on the axp209 pmic.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-20 18:40:27 +02:00
Hans de Goede
03f8ae3719 sunxi: power: Drop protection against multiple calls from axp221 axp_init()
The only thing axp221.c's axp_init() does which needs protection
against multiple calls is calling pmic_bus_init, and pmic_bus_init()
itself is already protected against being called multiple times.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-20 18:40:27 +02:00
Hans de Goede
30490b528b sunxi: power: Use pmic_bus functions for axp152 / axp209 driver
Use the generic pmic_bus helpers for the axp152 / axp209 drivers,
rather then having them define their own register read / write
functions.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-20 18:40:27 +02:00
Hans de Goede
514b2d9dbb sunxi: power: Change A23/A33 aldo1 default voltage to 3.0V
On A23 / A33 boards aldo1 is used for VCC-IO and should be 3.0V, make this
the default.

Note that this does not cause any functional changes since all sun8i
board defconfig-s already contained: CONFIG_AXP_ALDO1_VOLT=3000 .

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-20 18:40:27 +02:00
Hans de Goede
f339f09c47 sunxi: power: Change A23/A33 VDD-SYS default from 1.2V to 1.1V
Change the axp223 dcdc2 / VDD-SYS default from 1.2V to 1.1V, 1.1V is the
value recommended by Allwinner and is what most fex files specify.

This has been tested on a number of A23/A33 tablets including on an
A23 Ippo-q8h-v1.2 PCB tablet which has a fex file which specifies 1.2V
(which is where our original 1.2V default comes from).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-20 18:40:27 +02:00
Hans de Goede
6944aff1ca sunxi: power: Unify axp pmic function names
Stop prefixing the axp functions for setting voltages, etc. with the
model number, there ever is only one pmic driver built into u-boot,
this allows simplifying the callers.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-20 18:40:27 +02:00
Hans de Goede
401175220d sunxi: power: Make all voltages configurable through Kconfig
On boards with axp221/223 pmic-s we already allow configuring most
voltages. Make the Kconfig options for these also apply to boards with
axp152 / axp209 pmic-s and extend them to configure all voltages.

The Kconfig defaults are chosen so that this commit does not introduce any
functional changes.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-20 18:40:27 +02:00
Hans de Goede
1df44814f5 sunxi: Kconfig-ify CONFIG_AXP152_POWER and _AXP209_POWER
Kconfig-ify CONFIG_AXP152_POWER and _AXP209_POWER settings, removing
them from CONFIG_SYS_EXTRA_OPTIONS.

Note that sun5i boards can have either an AXP209 or an AXP152 pmic, the
Kconfig default is AXP209, boards with an AXP152 must explicitly select
this. Likewise boards without a pmic must explicitly select SUNXI_NO_PMIC
in their defconfig.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-20 18:40:27 +02:00
Hans de Goede
70ac9295e3 sunxi: Remove board defconfig-s for specific Q8 tablet PCB-s
We now have generic q8_a?3_defconfig files for Q8 formfactor tablets with
an A13 / A23 / A33 SoC, there is no need for these PCB variant specific
defconfig-s and they only serve to confuse the user.

Note that in case of the forfun_q88db_defconfig and TZX-Q8-713B7_defconfig
for A13 based Q8 tablets there is not even a dts file for these in the
upstream kernel, which is all the more reason to remove them.

The generic q8_a?3_defconfig files have been tested on an Et_q8_v1_6,
Ippo_q8h_v1_2_a33_1024x600, Ippo_q8h_v1_2 and TZX-Q8-713B7 tablet, and the
forfun_q88db_defconfig is identical to q8_a13_tablet_defconfig.

This leaves only the Ippo_q8h_v5 untested with the new generic defconfigs
but there is no reason to assume that it will not work.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-20 18:40:27 +02:00
Hans de Goede
6d0bdfdde5 sunxi: Switch to using malloc_simple for the spl
common/dlmalloc.c is quite big, both in .text and .data usage. E.g. for a
Mele_M9 sun6i board build this reduces .text from 0x4214 to 0x3b94 bytes,
and .data from 0x54c to 0x144 bytes.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-10-20 18:40:27 +02:00
Hans de Goede
ff42d107bf sunxi: Enable CONFIG_SPL_STACK_R
Select CONFIG_SPL_STACK_R for sunxi boards, this gives us much more
room on the stack once we've the DRAM running.

Besides being a good change to have on itself, this also paves the
way for switching to using malloc_simple in the SPL which cuts of
close to 4KiB of the SPL size.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-10-20 18:40:27 +02:00
Hans de Goede
dcfcb8d49a malloc_simple: Add support for switching to DRAM heap
malloc_simple uses a part of the stack as heap, initially it uses
SYS_MALLOC_F_LEN bytes which typically is quite small as the initial
stacks sits in SRAM and we do not have that much SRAM to work with.

When DRAM becomes available we may switch the stack from SRAM to DRAM
to give use more room. This commit adds support for also switching to
a new bigger malloc_simple heap located in the new stack.

Note that this requires spl_init to be called before spl_relocate_stack_gd
which in practice means that spl_init must be called from board_init_f.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-20 18:40:27 +02:00
Hans de Goede
1eb0c03c21 malloc_simple: Add Kconfig option for using only malloc_simple in the SPL
common/dlmalloc.c is quite big, both in .text and .data usage, therefor
on some boards the SPL is build to use only malloc_simple.c and not the
dlmalloc.c code. This is done in various include/configs/foo.h with the
following construct:

 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_MALLOC_SIMPLE
 #endif

This commit introduces a SPL_MALLOC_SIMPLE Kconfig bool which allows
selecting this functionality through Kconfig instead.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-20 18:40:27 +02:00
Hans de Goede
8656c4f76f spl: spl_relocate_stack_gd: Do not unnecessarily clear bss
spl_relocate_stack_gd only gets called from arch/arm/lib/crt0.S which
clears the bss directly after calling it, so there is no need to clear
it from spl_relocate_stack_gd.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-20 18:40:27 +02:00
Tom Rini
5ec0003b19 Prepare v2015.10
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-10-19 19:59:38 -04:00
Simon Glass
75918afa64 powerpc: Drop old non-generic-board code
This code is no-longer used. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-10-19 17:06:20 -04:00
Paul Gortmaker
6a48109d0e sbc8641d: enable and test CONFIG_SYS_GENERIC_BOARD
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2015-10-19 17:06:19 -04:00
Paul Gortmaker
ecdc3df611 sbc8641d: increase monitor size from 256k to 384k
Between v2015.07-rc1 and v2015.07-rc2 this board started
silent boot failure.  A bisect led to commit 6eed3786c6
("net: Move the CMD_NET config to defconfigs").  This commit
looks harmless in itself, but it did implicitly add a feature
to the image which led to this:

 u-boot$git describe 6eed3786c6
 v2015.07-rc1-412-g6eed3786c68c
              ^^^

 u-boot$ls -l ../41*/u-boot.bin
 -rwxrwxr-x 1 paul paul 261476 Oct 16 16:47 ../411/u-boot.bin
 -rwxrwxr-x 1 paul paul 266392 Oct 16 16:43 ../412/u-boot.bin
 u-boot$bc
 bc 1.06.95
 Copyright 1991-1994, 1997, 1998, 2000, 2004, 2006 Free Software Foundation, Inc.
 This is free software with ABSOLUTELY NO WARRANTY.
 For details type `warranty'.
 256*1024
 262144

i.e. we finally broke through the 256k monitor size.  Jump it
up to 384k and fix the hard coded value used in the env offset
at the same time.

We were probably flirting with the 256k size issue without
knowing it when testing on different baselines in earlier
commits, but since this is all board specific, a rebase or
reorder to put this commit 1st is of little value.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2015-10-19 17:06:19 -04:00
Paul Gortmaker
743d75925a sbc8641d: add basic flash setup instructions to README file
...so that I don't have to go work them out from scratch again
by peering at the manual.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2015-10-19 17:06:18 -04:00
Paul Gortmaker
71d5511628 sbc8641d: set proper environment sector size.
When debugging an env fail due to too small a malloc pool, it
was noted that the env write was 256k.  But the device sector
size is 1/2 that, as can be seen from "fli" output:

Bank # 1: CFI conformant flash (16 x 16)  Size: 16 MB in 131 Sectors
  Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x1888
  Erase timeout: 4096 ms, write timeout: 1 ms
  Buffer write timeout: 2 ms, buffer size: 64 bytes

  Sector Start Addresses:
  FF000000 E RO   FF020000 E RO   FF040000 E RO   FF060000 E RO   FF080000 E RO
  FF0A0000 E RO   FF0C0000 E RO   FF0E0000 E RO   FF100000 E RO   FF120000 E RO
  [...]
  FFF00000   RO   FFF20000   RO   FFF40000   RO   FFF60000   RO   FFF80000   RO
  FFFA0000   RO   FFFC0000   RO   FFFE0000 E RO   FFFE8000   RO   FFFF0000 E RO
  FFFF8000   RO
=>

The desired env sector is FFF40000->FFF60000, or 0x20000 in length,
just after the 256k u-boot image which starts @ FFF00000.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2015-10-19 17:06:18 -04:00
Paul Gortmaker
7229c3c70b sbc8641d: increase malloc pool size to a sane default
Currently the board fails to save its env, since the env size
is much smaller than the sector size, and the malloc fails for
the pad buffer, giving the user visible symptom of:

Unable to save the rest of sector (253952)

Allow for 1M malloc pool, the same as used on the sbc8548 board.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2015-10-19 17:06:17 -04:00
Paul Gortmaker
73f7550715 sbc8641d: enable command line editing
It is just too painful to use interactively without it.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2015-10-19 17:06:17 -04:00
Andrej Rosano
84ca65aa4b image-fit: Fix signature checking
On signature verification failures fit_image_verify() should
exit with error.

Signed-off-by: Andrej Rosano <andrej@inversepath.com>
2015-10-19 17:06:16 -04:00
Ladislav Michl
81fd858cbe igep00x0: Use BCH8 ECC
Used NAND chips requires at least 4-bit error correction, so use BCH8
as it is what kernel uses.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-10-19 17:06:16 -04:00
Liviu Dudau
2fdc9b741b vexpress64: Juno: Add initialisation code for Juno R1 PCIe host bridge.
Juno R1 has an XpressRICH3 PCIe host bridge that needs to be initialised
in order for the Linux kernel to be able to enumerate the bus. Add
support code here that enables the host bridge, trains the links and
sets up the Address Translation Tables.

Signed-off-by: Liviu Dudau <Liviu.Dudau@foss.arm.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
[trini: Always declare vexpress64_pcie_init and continue handling logic
inside the function]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-10-19 17:05:46 -04:00
Liviu Dudau
2d0cee1ca2 vexpress64: Juno: Declare all 8GB of RAM and make them visible to the kernel.
Juno comes with 8GB RAM, but U-Boot only passes 2GB to the kernel.
Declare a secondary memory bank and set the sizes correctly.

Signed-off-by: Liviu Dudau <Liviu.Dudau@foss.arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
2015-10-19 17:05:28 -04:00
Fabio Estevam
2727f3bfba dfu: dfu_sf: Take the start address into account
The dfu_alt_info_spl variable allows passing a starting point
for the binary to be flashed in the SPI NOR.

For example, if we have 'dfu_alt_info_spl=spl raw 0x400', this means
that we want to flash the binary starting at address 0x400.

In order to do so we need to erase the entire sector and write to
the the subsequent SPI NOR sectors taking such start address
into account for the address calculations.

Tested by succesfully writing SPL binary into 0x400 offset and
the u-boot.img at offset 64 kiB of a SPL NOR.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
[trini: Use lldiv for the math]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-10-19 17:05:13 -04:00
Fabio Estevam
f4c9258213 dfu: dfu_sf: Use the erase sector size for erase operations
SPI NOR flashes need to erase the entire sector size and we cannot pass
any arbitrary length for the erase operation.

To illustrate the problem:

Copying data from PC to DFU device
Download    [=========================] 100%       478208 bytes
Download done.
state(7) = dfuMANIFEST, status(0) = No error condition is present
state(10) = dfuERROR, status(14) = Something went wrong, but the
device does not know what it was
Done!

In this case, the binary has 478208 bytes and the M25P32 SPI NOR
has an erase sector of 64kB.

478208  = 7 entire sectors of 64kiB + 19456 bytes.

Erasing the first seven 64 kB sectors works fine, but when trying
to erase the remainding 19456 causes problem and the board hangs.

Fix the issue by always erasing with the erase sector size.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
2015-10-19 13:47:06 -04:00
Tom Rini
d718ff70ee doc/README.scrapyard: Add more entries
- Add deletions from August 30 2015.
- A few from Sept 12, one from Oct 2nd.

Signed-off-by: Tom Rini <trini@konsulko.com>
2015-10-19 13:32:09 -04:00
Tom Rini
04d6f1420f Revert "arm: Remove inetspace_v2_cmc board"
Upon further review when populating README.scrapyard, inetspace_v2_cmc
is a variant on netspace_v2 and not just an orphan config.

This reverts commit 653600a715.

Signed-off-by: Tom Rini <trini@konsulko.com>
2015-10-19 12:27:10 -04:00
Tom Rini
7003e4cf76 Merge branch 'master' of git://git.denx.de/u-boot-arm 2015-10-19 11:30:38 -04:00
Tom Rini
ef1e5710b3 Revert "arm: Remove d2net_v2 defconfig file"
Upon further review when populating README.scrapyard, d2net_v2 is a
variant on net2big_v2 and not just an orphan config.  To help in the
future also add this to board/LaCie/net2big_v2/MAINTAINERS which needed
a little consolidation anyhow.

This reverts commit 1363740e79.

Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-10-19 11:26:49 -04:00
Tom Rini
461f592649 doc/README.scrapyard: Populate recent removals
Add in the commit IDs / dates for boards removed on Sept 2nd.

Signed-off-by: Tom Rini <trini@konsulko.com>
2015-10-19 11:07:24 -04:00
Lubomir Rintel
79ad5cef15 ARM: rpi: add another revision of Raspberry Pi A+
Seen this one in the wild. Is labelled "Raspberry Pi Model A+ V1.1,
(C) Raspberry Pi 2014". A standard A+ board, much like the one with
version 0x12, didn't notice any differencies.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2015-10-19 08:12:25 +02:00
Eric Cooper
d1a2f32fca ARM: dockstar: move start of environment area
The default dockstar configuration for U-Boot currently causes it to
overrun the environment area, so that a "saveenv" command bricks the
device.  This patch moves the environment to a higher address to avoid
that.

Signed-off-by: Eric Cooper <ecc@cmu.edu>
2015-10-19 07:28:54 +02:00
Lokesh Vutla
8626cb8021 ARM: k2e/l: Apply WA for selecting PA clock source
On keystone2 Lamarr and Edison platforms, the PA clocksource
mux in PLL REG1, can be changed only after enabling its clock
domain.
So selecting the output of PASS PLL as input to PA only after
enabling the clockdomain.
This is as per the debug done by "Vitaly Andrianov <vitalya@ti.com>"
and based on the previous work done by "Hao Zhang <hzhang@ti.com>"

Fixes: d634a0775bcf ("ARM: keystone2: Cleanup PLL init code")
Reported-by: Vitaly Andrianov <vitalya@ti.com>
Tested-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-17 20:16:13 -04:00
Tom Rini
b9f06b360d arch/powerpc/config.mk: Pass -fno-ira-hoist-pressure when possible
There are various toolchain issues that cause us to produce invalid
binaries with certain gcc 4.8.x and 4.9.x versions when we don't pass
this flag in.

Tested-by: Joakim Tjernlund <joakim.tjernlund@transmode.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-10-17 08:04:11 -04:00