Commit Graph

462 Commits

Author SHA1 Message Date
Tom Rini
eeb72e6761 Merge branch 'master' of git://git.denx.de/u-boot-arm
Conflicts:
	arch/arm/cpu/armv7/config.mk
	board/ti/am43xx/mux.c
	include/configs/am43xx_evm.h

Signed-off-by: Tom Rini <trini@ti.com>
2014-02-26 16:49:58 -05:00
Tom Rini
1551df35f2 arm: Switch to -mno-unaligned-access when supported by the compiler
When we tell the compiler to optimize for ARMv7 (and ARMv6 for that
matter) it assumes a default of SCTRL.A being cleared and unaligned
accesses being allowed and fast at the hardware level.  We set this bit
and must pass along -mno-unaligned-access so that the compiler will
still breakdown accesses and not trigger a data abort.

To better help understand the requirements of the project with respect
to unaligned memory access, the
Documentation/unaligned-memory-access.txt file has been added as
doc/README.unaligned-memory-access.txt and is taken from the v3.14-rc1
tag of the kernel.

Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Mans Rullgard <mans@mansr.com>
Signed-off-by: Tom Rini <trini@ti.com>
2014-02-26 21:19:32 +01:00
Tom Rini
715b56fe2b Revert "ext4fs: Add ext4 extent cache for read operations"
This reverts commit fc0fc50f38.

The author has asked on the mailing list that we revert this for now as
it breaks write support.

Reported-by: Łukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Tom Rini <trini@ti.com>
2014-02-26 08:18:58 -05:00
Karicheri, Muralidharan
1674df60d1 ubifs: fix checkpatch warning
Fix the following checkpatch warning:-

WARNING: externs should be avoided in .c files

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
2014-02-21 11:33:19 -05:00
Ionut Nicu
fc0fc50f38 ext4fs: Add ext4 extent cache for read operations
In an ext4 filesystem, the inode corresponding to a file has a 60-byte
area which contains an extent header structure and up to 4 extent
structures (5 x 12 bytes).

For files that need more than 4 extents to be represented (either files
larger than 4 x 128MB = 512MB or smaller files but very fragmented),
ext4 creates extent index structures. Each extent index points to a 4KB
physical block where one extent header and additional 340 extents could
be stored.

The current u-boot ext4 code is very inefficient when it tries to load a
file which has extent indexes. For each logical file block the code will
read over and over again the same blocks of 4096 bytes from the disk.

Since the extent tree in a file is always the same, we can cache the
extent structures in memory before actually starting to read the file.

This patch creates a simple linked list of structures holding information
about all the extents used to represent a file. The list is sorted by
the logical block number (ee_block) so that we can easily find the
proper extent information for any file block.

Without this patch, a 69MB file which had just one extent index pointing
to a block with another 6 extents was read in approximately 3 minutes.
With this patch applied the same file can be read in almost 20 seconds.

Signed-off-by: Ionut Nicu <ioan.nicu.ext@nsn.com>
2014-02-21 11:33:18 -05:00
Tom Rini
1530f6f51a fs/fdos: Remove
We have an unused FAT implementation in fs/fdos, remove.

Signed-off-by: Tom Rini <trini@ti.com>
2014-02-21 08:42:47 -05:00
Masahiro Yamada
6825a95b0b kbuild: use Linux Kernel build scripts
Now we are ready to switch over to real Kbuild.

This commit disables temporary scripts:
  scripts/{Makefile.build.tmp, Makefile.host.tmp}
and enables real Kbuild scripts:
  scripts/{Makefile.build,Makefile.host,Makefile.lib}.

This switch is triggered by the line in scripts/Kbuild.include
  -build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build.tmp obj
  +build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj

We need to adjust some build scripts for U-Boot.
But smaller amount of modification is preferable.

Additionally, we need to fix compiler flags which are
locally added or removed.

In Kbuild, it is not allowed to change CFLAGS locally.
Instead, ccflags-y, asflags-y, cppflags-y,
CFLAGS_$(basetarget).o, CFLAGS_REMOVE_$(basetarget).o
are prepared for that purpose.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Tested-by: Gerhard Sittig <gsi@denx.de>
2014-02-19 11:07:50 -05:00
Masahiro Yamada
9e4140329e kbuild: change out-of-tree build
This commit changes the working directory
where the build process occurs.

Before this commit, build process occurred under the source
tree for both in-tree and out-of-tree build.

That's why we needed to add $(obj) prefix to all generated
files in makefiles like follows:
  $(obj)u-boot.bin:  $(obj)u-boot

Here, $(obj) is empty for in-tree build, whereas it points
to the output directory for out-of-tree build.

And our old build system changes the current working directory
with "make -C <sub-dir>" syntax when descending into the
sub-directories.

On the other hand, Kbuild uses a different idea
to handle out-of-tree build and directory descending.

The build process of Kbuild always occurs under the output tree.
When "O=dir/to/store/output/files" is given, the build system
changes the current working directory to that directory and
restarts the make.

Kbuild uses "make -f $(srctree)/scripts/Makefile.build obj=<sub-dir>"
syntax for descending into sub-directories.
(We can write it like "make $(obj)=<sub-dir>" with a shorthand.)
This means the current working directory is always the top
of the output directory.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Tested-by: Gerhard Sittig <gsi@denx.de>
2014-02-19 11:07:50 -05:00
Stephen Warren
b7b5f3195f fat: implement exists() for FAT fs
This hooks into the generic "file exists" support added in an earlier
patch, and provides an implementation for the FAT filesystem.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-02-19 09:47:34 -05:00
Stephen Warren
55af5c9313 ext4: implement exists() for ext4fs
This hooks into the generic "file exists" support added in an earlier
patch, and provides an implementation for the ext4 filesystem.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-02-19 09:47:34 -05:00
Stephen Warren
0a30aa1e7e sandbox: implement exists() function
This hooks into the generic "file exists" support added in an earlier
patch, and provides an implementation for the sandbox test environment.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-02-19 09:47:34 -05:00
Stephen Warren
377202b560 fs: don't pass NULL dev_desc to most filesystems
FAT and ext4 expect that the passed in block device descriptor not be
NULL. This causes problems on sandbox, where get_device_and_partition()
succeeds for the "host" device, yet passes back a NULL device descriptor.
Add special handling for this situation, so that the generic filesystem
commands operate as expected on sandbox.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-02-19 09:47:33 -05:00
Stephen Warren
6152916a95 fs: implement infrastructure for an 'exists' function
This could be used in scripts such as:

if test -e mmc 0:1 /boot/boot.scr; then
    load mmc 0:1 ${scriptaddr} /boot/boot.scr
    source ${scriptaddr}
fi

rather than:

if load mmc 0:1 ${scriptaddr} /boot/boot.scr; then
    source ${scriptaddr}
fi

This prevents errors being printed by attempts to load non-existent
files, which can be important when checking for a large set of files,
such as /boot/boot.scr.uimg, /boot/boot.scr, /boot/extlinux.conf,
/boot.scr.uimg, /boot.scr, /extlinux.conf.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-02-19 09:47:33 -05:00
Stephen Warren
bd6fb31fab fs: fix generic save command implementation
Fix a few issues with the generic "save" shell command, and fs_write()
function.

1) fstypes[].write wasn't filled in for some file-systems, and isn't
   checked when used, which could cause crashes/... if executing save
   on e.g. fat/ext filesystems.

2) fs_write() requires the length argument to be non-zero, since it needs
   to know exactly how many bytes to write. Adjust the comments and code
   according to this.

3) fs_write() wasn't prototyped in <fs.h> like other generic functions;
   other code should be able to call this directly rather than invoking
   the "save" shell command.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-02-19 09:47:33 -05:00
Charles Manning
55283635a0 yaffs2: Remove block number check from summary verification
The summary already has other verification. This one is not needed.

The check caused summaries to be ignored if they were not on the
numbered block. This caused problems when a summary was embedded in an
image and the image is written to a flash with bad blocks.

Signed-off-by: Charles Manning <cdhmanning@gmail.com>
2014-01-20 10:09:51 -05:00
Ionut Nicu
b5bbac1a9b ext4fs: fix "invalid extent block" error
For files where we actually have extent indexes following
an extent header (ext_block->eh_depth != 0), the do/while
loop from ext4fs_get_extent_block() does not select the
proper extent index structure.

For example, if we have:

ext_block->eh_depth = 1
ext_block->eh_entries = 1
fileblock = 0
index[0].ei_block = 0

the do/while loop will exit with i set to 0 and the
ext4fs_get_extent_block() function will return 0, even if
there was a valid extent index structure following the
header.

Signed-off-by: Ionut Nicu <ioan.nicu.ext@nsn.com>
Signed-off-by: Mathias Rulf <mathias.rulf@nsn.com>
2014-01-20 10:09:40 -05:00
Ionut Nicu
470173274d ext4fs: use EXT2_BLOCK_SIZE instead of fs->blksz
Using fs->blksz in ext4fs_get_extent_block() is not
correct since fs->blksz is not initialized on the
read path. Use EXT2_BLOCK_SIZE() instead which will
produce the desired output.

Signed-off-by: Ionut Nicu <ioan.nicu.ext@nsn.com>
Signed-off-by: Mathias Rulf <mathias.rulf@nsn.com>
2014-01-20 10:09:40 -05:00
Ma Haijun
0550870b1c fs/ext4: fix calling put_ext4 with truncated offset
Curently, we are using 32 bit multiplication to calculate the offset,
so the result will always be 32 bit.
This can silently cause file system corruption when performing a write
operation on partition larger than 4 GiB.

This patch address the issue by simply promoting the terms to 64 bit,
and let compilers decide how to do the multiplication efficiently.

Signed-off-by: Ma Haijun <mahaijuns@gmail.com>
2014-01-20 10:09:38 -05:00
Ma Haijun
f17828830d fs/ext4: fix partition size get truncated in calculation
It may cause file system corruption when do a write operation.
This issue only affects boards that use 32 bit lbaint_t.

Signed-off-by: Ma Haijun <mahaijuns@gmail.com>
2014-01-20 10:09:38 -05:00
Tom Rini
6b44adc22e yaffs2: Use lldiv for 64bit division
Signed-off-by: Tom Rini <trini@ti.com>
2013-12-13 09:16:20 -05:00
Tom Rini
18e8672449 JFFS2: Correct jffs2_1pass_build_lists to use lldiv
Since part_info size became 64bit we need to use lldiv here.

Signed-off-by: Tom Rini <trini@ti.com>
2013-12-13 09:16:20 -05:00
Masahiro Yamada
4678d74256 fs: descend into sub directories when it is necessary
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-11-17 14:11:34 -05:00
Masahiro Yamada
57c3e5fcf2 Makefile: move fs/fat/ entry to drivers/Makefile
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2013-11-17 14:11:34 -05:00
Piotr Wilczek
73dc8328c3 fs:fat: fix set file name function
Curently memcpy copies string without null terminating char because
function strlen returns only number of characters excluding
null terminating character. Replace memcpy with strcpy.

Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Tom Rini <trini@ti.com>
2013-11-08 15:25:13 -05:00
Masahiro Yamada
e82004bc68 fs: move some file system to fs/Makefile
This commit moves some subdirectories of fs
from the toplevel Makefile to fs/Makefile
using Kbuild descending feature.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2013-10-31 13:26:44 -04:00
Masahiro Yamada
35c792754c fs: convert makefiles to Kbuild style
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-10-31 13:26:01 -04:00
Scott Wood
06503f16c3 mtd: fix warnings due to 64-bit partition support
commit 39ac34473f ("cmd_mtdparts: use 64
bits for flash size, partition size & offset") introduced warnings
in a couple places due to printf formats or pointer casting.

This patch fixes the warnings pointed out here:
http://lists.denx.de/pipermail/u-boot/2013-October/164981.html

Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: York Sun <yorksun@freescale.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Tom Rini <trini@ti.com>
2013-10-15 20:03:59 -04:00
Wolfgang Denk
93e1459641 Coding Style cleanup: replace leading SPACEs by TABs
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Drop changes for PEP 4 following python tools]
Signed-off-by: Tom Rini <trini@ti.com>
2013-10-14 16:06:54 -04:00
Wolfgang Denk
b770e88a6c Fix number base handling of "load" command
As documented, almost all U-Boot commands expect numbers to be entered
in hexadecimal input format. (Exception: for historical reasons, the
"sleep" command takes its argument in decimal input format.)

This rule was broken for the "load" command; for details please see
especially commits 045fa1e "fs: add filesystem switch libary,
implement ls and fsload commands" and 3f83c87 "fs: fix number base
behaviour change in fatload/ext*load".  In the result, the load
command would always require an explicit "0x" prefix for regular
(i. e. base 16 formatted) input.

Change this to use the standard notation of base 16 input format.
While strictly speaking this is a change of the user interface, we
hope that it will not cause trouble.  Stephen Warren comments (see
[1]):

        I suppose you can change the behaviour if you want; anyone
        writing "0x..." for their values presumably won't be
        affected, and if people really do assume all values in U-Boot
        are in hex, presumably nobody currently relies upon using
        non-prefixed values with the generic load command, since it
        doesn't work like that right now.

[1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/171172

Acked-by: Tom Rini <trini@ti.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
2013-10-07 15:54:18 -04:00
Wu, Josh
6b8f185faf fs: fat: don't call disk_write with zero sector num
In the set_cluster() function, it will convert the buffer size to sector
numbers. Then call disk_write() to write by sector.
For remaining buffer, the size is less than a sector, call disk_write()
again to write them in one sector.

But if the total buffer size is less then one sector, the original code
will call disk_write() with zero sector number. It is unnecessary.
So this patch fix this. Now it will not call disk_write() if total buffer size
is less than one sector.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
2013-09-06 13:09:07 -04:00
Wolfgang Denk
cb3761ea99 SPDX-License-Identifier: convert BSD-3-Clause files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini Don't remove some copyrights by accident]
Signed-off-by: Tom Rini <trini@ti.com>
2013-08-19 15:45:35 -04:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Rommel Custodio
8b415f703f ext4fs: le32_to_cpu() used on a 16-bit field
Fix reading ext4_extent_header struture on BE machines.  Some 16 bit
fields where converted to 32 bit fields, due to the byte swap on BE
machines the containing value was corrupted. Therefore reading ext4
filesystems on BE machines where broken before.

Signed-off-by: Rommel Custodio <sessyargc+uboot@gmail.com>
[sent via git-send-email; rework commit message]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
2013-07-22 10:09:30 -04:00
Frederic Leroy
04735e9c55 Fix ext2/ext4 filesystem accesses beyond 2TiB
With CONFIG_SYS_64BIT_LBA, lbaint_t gets defined as a 64-bit type,
which is required to represent block numbers for storage devices that
exceed 2TiB (the block size usually is 512B), e.g. recent hard drives

We now use lbaint_t for partition offset to reflect the lbaint_t change,
and access partitions beyond or crossing the 2.1TiB limit.
This required changes to signature of ext4fs_devread(), and type of all
variables relatives to block sector.

ext2/ext4 fs uses logical block represented by a 32 bit value. Logical
block is a multiple of device block sector. To avoid overflow problem
when calling ext4fs_devread(), we need to cast the sector parameter.

Signed-off-by: Frédéric Leroy <fredo@starox.org>
2013-07-15 17:06:13 -04:00
Holger Brunck
457dd025a2 cramfs: fix bug for wrong filename comparison
"cramfsload uImage_1" succeeds even though the actual file is named
"uImage".

Fix file name comparison when one name is the prefix of the other.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
cc: Wolfgang Denk <wd@denx.de>
cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
2013-07-15 17:06:09 -04:00
Tom Rini
d6639d10db Merge branch 'master' of git://git.denx.de/u-boot-nand-flash 2013-05-31 18:28:47 -04:00
Sergey Lapin
dfe64e2c89 mtd: resync with Linux-3.7.1
This patch is essentially an update of u-boot MTD subsystem to
the state of Linux-3.7.1 with exclusion of some bits:

- the update is concentrated on NAND, no onenand or CFI/NOR/SPI
flashes interfaces are updated EXCEPT for API changes.

- new large NAND chips support is there, though some updates
have got in Linux-3.8.-rc1, (which will follow on top of this patch).

To produce this update I used tag v3.7.1 of linux-stable repository.

The update was made using application of relevant patches,
with changes relevant to U-Boot-only stuff sticked together
to keep bisectability. Then all changes were grouped together
to this patch.

Signed-off-by: Sergey Lapin <slapin@ossfans.org>
[scottwood@freescale.com: some eccstrength and build fixes]
Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-05-31 17:12:03 -05:00
Stephen Warren
c28cbfa1a8 ext4: assign get_fs()->dev_desc before using it
Commit 50ce4c0 "fs/ext4: Support device block sizes != 512 bytes"
modified ext4fs_set_blk_dev() to calculate total_sect based on
get_fs()->dev_desc->log2blksz rather than SECTOR_SIZE. However, this
value wasn't yet assigned. Move the assignment earlier so the code
doesn't crash or hang.

Cc: Egbert Eich <eich@suse.com>
Tested-by: Tom Rini <trini@ti.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-05-24 10:04:23 -04:00
Egbert Eich
50ce4c07df fs/ext4: Support device block sizes != 512 bytes
The 512 byte block size was hard coded in the ext4 file systems.
Large harddisks today support bigger block sizes typically 4096
bytes.
This patch removes this limitation.

Signed-off-by: Egbert Eich <eich@suse.com>
2013-05-10 08:16:33 -04:00
Egbert Eich
bc8d98713f fs/fat: Don't multiply fatsize with sector size
Bugfix:
Here at this place we need the fat size in sectors not bytes.
This was found during code review when adding support for storage
devices with blocksizes != 512.

Signed-off-by: Egbert Eich <eich@suse.com>
2013-05-01 16:24:02 -04:00
Simon Glass
7eb2c8d573 sandbox: fs: Add support for saving files to host filesystem
This allows write of files from the host filesystem in sandbox. There is
currently no concept of overwriting the file and removing its existing
contents - all writing is done on top of what is there. This means that
writing 10 bytes to the start of a 1KB file will only update those 10
bytes, not truncate the file to 10 byte slong.

If the file does not exist it is created.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-01 11:17:21 -04:00
Simon Glass
a8f6ab5229 fs: Add support for saving data to filesystems
Add a new method for saving that filesystems can implement. This mirrors the
existing load method.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-01 11:17:21 -04:00
Joe Hershberger
147162dac6 ubi: ubifs: Turn off verbose prints
The prints are out of control.  SILENCE!

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2013-04-11 15:52:54 -04:00
York Sun
472d546054 Consolidate bool type
'bool' is defined in random places. This patch consolidates them into a
single header file include/linux/types.h, using stdbool.h introduced in C99.

All other #define, typedef and enum are removed. They are all consistent with
true = 1, false = 0.

Replace FALSE, False with false. Replace TRUE, True with true.
Skip *.py, *.php, lib/* files.

Signed-off-by: York Sun <yorksun@freescale.com>
2013-04-01 16:33:52 -04:00
Joe Hershberger
949a771097 ubifs: Allow ubifsmount volume reference by number
UBI can mount volumes by name or number  The current code forces you
to name the volume by prepending every name with "ubi:".

>From fs/ubifs/super.c
 * There are several ways to specify UBI volumes when mounting UBIFS:
 * o ubiX_Y    - UBI device number X, volume Y;
 * o ubiY      - UBI device number 0, volume Y;
 * o ubiX:NAME - mount UBI device X, volume with name NAME;
 * o ubi:NAME  - mount UBI device 0, volume with name NAME.

Now any name passed in any of the above forms are allowed.

Also update the configs that referenced ubifsmount.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2013-03-04 14:19:56 -05:00
Simon Glass
92ccc96bf3 sandbox: Add host filesystem
This allows reading of files from the host filesystem in sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@ti.com>
2013-03-04 14:19:56 -05:00
Simon Glass
e6d5241534 fs: Move ls and read methods into ext4, fat
It doesn't make a lot of sense to have these methods in fs.c. They are
filesystem-specific, not generic code. Add each to the relevant
filesystem and remove the associated #ifdefs in fs.c.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@ti.com>
2013-03-04 14:19:56 -05:00
Simon Glass
117e050727 fs: Use map_sysmem() on read
This allows us to use filesystems on sandbox. It has no effect on other
architectures.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@ti.com>
2013-03-04 14:19:56 -05:00
Simon Glass
2ded0d4719 fs: Tell probe functions where to put their results
Rather than rely on global variables for the probe functions, pass in
the information that we need filled in. This allows us to potentially
keep the variables private to fs.c in the future, and the meaning of
the probe function is clearer.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@ti.com>
2013-03-04 14:19:56 -05:00
Simon Glass
c6f548d232 fs: Use filesystem methods instead of switch()
We can use the available methods and avoid using switch(). When the
filesystem is not supported, we fall through to the 'unsupported'
methods: fs_probe_unsupported() prints an error, so the others do
not need to.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@ti.com>
2013-03-04 14:19:56 -05:00
Simon Glass
436e2b7319 fs: Fully populate the filesystem method struct
There is a structure in fs.c with just a probe method. By adding methods
for other operations, we can avoid lots of #ifdefs and switch()s. As a
first step, create the structure ready for use.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@ti.com>
2013-03-04 14:19:56 -05:00
Simon Glass
293d7fbd47 ext4: Split write support into its own file
This code seems to be entirely othogonal, so remove the #ifdef and put
the condition in the Makefile instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-04 14:19:56 -05:00
Simon Glass
49c4f0370b fs: Use new numeric setenv functions
Use setenv_ulong(), setenv_hex() and setenv_addr() in fs/

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-02-28 19:09:23 -08:00
Richard Genoud
cb940c7ede FAT: remove ifdefs to make the code more readable
ifdefs in the code are making it harder to read.
The use of simple if(vfat_enabled) makes no more code and is cleaner.
(the code is discarded by the compiler instead of the preprocessor.)
NB: if -O0 is used, the code won't be discarded

and bonus, now the code compiles even if CONFIG_SUPPORT_VFAT is not
defined.

Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
2013-02-04 09:05:47 -05:00
Richard Genoud
fb7e16cc1c FAT: use toupper/tolower instead of recoding them
toupper/tolower function are already declared, so use them.

Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
2013-02-04 09:05:46 -05:00
Marek Vasut
6ad77d88e5 vfat: Fix mkcksum argument sizes
In case a function argument is known/fixed size array in C, the argument is
still decoyed as pointer instead ( T f(U n[k]) ~= T fn(U *n) ) and therefore
calling sizeof on the function argument will result in the size of the pointer,
not the size of the array.

The VFAT code contains such a bug, this patch fixes it.

Reported-by: Aaron Williams <Aaron.Williams@cavium.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Tom Rini <tom.rini@gmail.com>
Cc: Aaron Williams <Aaron.Williams@cavium.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2013-01-31 14:43:01 -05:00
Łukasz Majewski
13d43555a9 fs:ext4:write: Initialize cache aligned filename buffer
The filename buffer is allocated dynamically. It must be cache aligned.
Moreover, it is necessary to erase its content before we use it for
file name operations.

This prevents from corruption of written file names.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-12-07 08:47:53 -07:00
Łukasz Majewski
d429ca0d83 fs:ext4:fix: Code refactoring to suppress compiler warnings
Several fixes to suppress compiler's (eldk-5.[12].x  gcc 4.6)
warning  [-Wunused-but-set-variable]

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-12-07 08:47:53 -07:00
Łukasz Majewski
a1f41f1a55 fs:ext4:write: Store block device descriptor in file system structure
The device block descriptor (block_dev_desc_t) )shall be stored at
ext4 early code (at ext4fs_set_blk_dev in this case) to be available
for latter use (like put_ext4()).

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-12-07 08:47:52 -07:00
Łukasz Majewski
32fc16d7e7 fs:ext4:write: Add lldiv and do_div to perform 64-32 bits division
The ext4write code has been using direct calls to 64-32 division
(/ and %).

Officially supported u-boot toolchains (eldk-5.[12].x) generate calls
to __aeabi_uldivmod(), which is niether defined in the toolchain libs
nor u-boot source tree.

Due to that, when the ext4write command has been executed, "undefined
instruction" execption was generated (since the __aeabi_uldivmod()
is not provided).

To fix this error, lldiv() for division and do_div() for modulo have
been used.

Those two functions are recommended for performing 64-32 bit number
division in u-boot.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-12-07 08:47:52 -07:00
Simon Glass
2592075776 cbfs: Remove mention of CREDITS files
As requested by Wolfgang, remove references to CREDITS in the CBFS
files.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 13:56:38 -07:00
Andreas Bießmann
da1fd96ce4 fs/fs.c: do_fsload: measure throughput
This patch adds time measurement and throughput calculation for
all supported load commands.

The output of ext2load changes from

---8<---
1830666 bytes read
--->8---

to

---8<---
1830666 bytes read in 237 ms (7.4 MiB/s)
--->8---

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
[agust: rebased and revised commit log]
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2012-11-14 13:35:14 +01:00
Alejandro Mery
624c721f0c fs: zfs: fix illegal use of fp
the upcoming sunxi (allwinner a10/a13) platform enables zfs
by default, and using linaro's hf -msoft-float makes the build
fail because this u64 division.

Signed-off-by: Alejandro Mery <amery@geeks.cl>
Acked-by: Stefan Roese <sr@denx.de>
2012-11-14 13:18:41 +01:00
Kim Phillips
eef1cf2d5c include/linux/byteorder: import latest endian definitions from linux
u-boot's byteorder headers did not contain endianness attributions
for use with sparse, causing a lot of false positives.  Import the
kernel's latest definitions, and enable them by including compiler.h
and types.h.  They come with 'const' added for some swab functions, so
fix those up, too:

include/linux/byteorder/big_endian.h:46:2: warning: passing argument 1 of '__swab64p' discards 'const' qualifier from pointer target type [enabled by default]

Also, note: u-boot's historic __BYTE_ORDER definition has been
preserved (for the time being at least).

We also remove ad-hoc barrier() definitions, since we're including
compiler.h in files that hadn't in the past:

macb.c:54:0: warning: "barrier" redefined [enabled by default]

In addition, including compiler.h in byteorder changes the 'noinline'
definition to expand to __attribute__((noinline)).  This fixes
arch/powerpc/lib/bootm.c:

bootm.c:329:16: error: attribute '__attribute__': unknown attribute
bootm.c:329:16: error: expected ')' before '__attribute__'
bootm.c:329:25: error: expected identifier or '(' before ')' token

powerpc sparse builds yield:

include/common.h:356:22: error: marked inline, but without a definition

the unknown-reason inlining without a definition is considered obsolete
given it was part of the 2002 initial commit, and no arm version was
'fixed.'

also fixed:
ydirectenv.h:60:0: warning: "inline" redefined [enabled by default]

and:

Configuring for devconcenter - Board: intip, Options: DEVCONCENTER
make[1]: *** [4xx_ibm_ddr2_autocalib.o] Error 1
make: *** [arch/powerpc/cpu/ppc4xx/libppc4xx.o] Error 2
powerpc-fsl-linux-size: './u-boot': No such file
4xx_ibm_ddr2_autocalib.c: In function 'DQS_autocalibration':
include/asm/ppc4xx-sdram.h:1407:13: sorry, unimplemented: inlining failed in call to 'ppc4xx_ibm_ddr2_register_dump': function body not available
4xx_ibm_ddr2_autocalib.c:1243:32: sorry, unimplemented: called from here

and:

In file included from crc32.c:50:0:
crc32table.h:4:1: warning: implicit declaration of function '___constant_swab32' [-Wimplicit-function-declaration]
crc32table.h:4:1: error: initializer element is not constant
crc32table.h:4:1: error: (near initialization for 'crc32table_le[0]')

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
[trini: Remove '#endif' in include/common.h around setenv portion]
Signed-off-by: Tom Rini <trini@ti.com>
2012-11-04 11:00:34 -07:00
Stephen Warren
f9b55e2285 fs: rename fsload command to load
When the generic filesystem load command "fsload" was written, I felt
that "load" was too generic of a name for it, since many other similar
commands already existed. However, it turns out that there is already
an "fsload" command, so that name cannot be used. Rename the new
"fsload" to plain "load" to avoid the conflict. At least anyone who's
used a Basic interpreter should feel familiar with the name!

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-04 11:00:34 -07:00
Stephen Warren
3f83c87ee5 fs: fix number base behaviour change in fatload/ext*load
Commit 045fa1e "fs: add filesystem switch libary, implement ls and
fsload commands" unified the implementation of fatload and ext*load
with the new command fsload. However, this altered the interpretation
of command-line numbers from always being base-16, to requiring a "0x"
prefix for base-16 numbers. Enhance do_fsload() to allow commands to
specify which base to use.

Use base 0, thus requiring a "0x" prefix for the new fsload command.
This feels much cleaner than assuming base 16.

Use base 16 for the pre-existing fatload and ext*load to prevent a
change in behaviour.

Use base 16 exclusively for the loadaddr environment variable, since
that variable is interpreted in multiple places, so we don't want the
behaviour to change.

Update command help text to make it clear where numbers are assumed to
be hex, and where an explicit "0x" prefix is required.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2012-11-04 11:00:31 -07:00
Stephen Warren
e9b0f99e82 fs: fix do_fsload() handling of optional arguments
Most arguments to the shell command do_fsload() implements are optional.
Fix the minimum argc check to respect that. Cater for the situation
where argv[2] is not provided.

Enhance both do_fsload() and do_ls() to check the maximum number of
arguments too. While this check would typically be implemented via
U_BOOT_CMD()'s max_args parameter, if these functions are called
directly, then that check won't exist.

Finally, alter do_ls() to check (argc >= 4) rather than (argc == 4) so
that if the function is enhanced to allow extra arguments in the future,
this test won't need to be changed at that time.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2012-11-04 11:00:24 -07:00
Stefan Roese
e08ebf4687 ZFS: Fix compile warning in fs/zfs/zfs.c (GCC 4.6.4 from ELDK 5.2.1)
This patch fixes the following compile warning:
zfs.c:2006:1: warning: 'zfs_label' defined but not used [-Wunused-function]
zfs.c:2029:1: warning: 'zfs_uuid' defined but not used [-Wunused-function]

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Jorgen Lundman <lundman@lundman.net>
2012-11-02 15:20:40 -07:00
Stephen Warren
a1b231cef6 fs: handle CONFIG_NEEDS_MANUAL_RELOC
Without this, fstypes[].probe points at the wrong place, so calling the
function results in undefined behaviour.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Andreas Bießmann <andreas.devel@googlemail.com>
2012-11-02 15:13:29 -07:00
Stephen Warren
045fa1e114 fs: add filesystem switch libary, implement ls and fsload commands
Implement "ls" and "fsload" commands that act like {fat,ext2}{ls,load},
and transparently handle either file-system. This scheme could easily be
extended to other filesystem types; I only didn't do it for zfs because
I don't have any filesystems of that type to test with.

Replace the implementation of {fat,ext[24]}{ls,load} with this new code
too.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-29 14:21:20 -07:00
Stephen Warren
03e2ecf6b8 fs: separate CONFIG_FS_{FAT, EXT4} from CONFIG_CMD_{FAT, EXT*}
This makes the FAT and ext4 filesystem implementations build if
CONFIG_FS_{FAT,EXT4} are defined, rather than basing the build on
whether CONFIG_CMD_{FAT,EXT*} are defined. This will allow the
filesystems to be built separately from the filesystem-specific commands
that use them. This paves the way for the creation of filesystem-generic
commands that used the filesystems, without requiring the filesystem-
specific commands.

Minor documentation changes are made for this change.

The new config options are automatically selected by the old config
options to retain backwards-compatibility.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2012-10-29 14:21:19 -07:00
Stephen Warren
672ee2110c fs: delete unused Makefile
fs/Makefile is unused. The top-level Makefile sets LIBS-y += fs/xxx and
hence causes make to directly descend two directory levels into each
individual filesystem, and it never descends into fs/ itself.

So, delete this useless file.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Acked-by: Simon Glass <sjg@chromium.org>
2012-10-29 14:21:19 -07:00
Stephen Warren
5e8f98319d FAT: implement fat_set_blk_dev(), convert cmd_fat.c
This makes the FAT filesystem API more consistent with other block-based
filesystems. If in the future standard multi-filesystem commands such as
"ls" or "load" are implemented, having FAT work the same way as other
filesystems will be necessary.

Convert cmd_fat.c to the new API, so the code looks more like other files
implementing the same commands for other filesystems.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2012-10-25 12:07:47 -07:00
Stephen Warren
a1687b858e FAT: initialize all fields in cur_part_info, simplify init
cur_part_info.{name,type} are strings. So, we don't need to memset()
the entire thing, just put the NULL-termination in the first byte.

Add missing initialization of the bootable and uuid fields.

None of these fields are actually used by fat.c. However, since it
stores the entire disk_partition_t, we should make sure that all fields
are valid.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2012-10-25 12:07:45 -07:00
Stephen Warren
461f86e696 FAT: remove cur_part_nr
A future patch will implement the more standard filesystem API
fat_set_blk_dev(). This API has no way to know which partition number
the partition represents. Equally, future DM rework will make the
concept of partition number harder to pass around.

So, simply remove cur_part_nr from fat.c; its only use is in a
diagnostic printf, and the context where it's printed should make it
obvious which partition is referred to anyway (since the partition ID
would come from the user command-line that caused it).

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2012-10-25 12:07:41 -07:00
Gabe Black
84cd93272e fs: Add a Coreboot Filesystem (CBFS) driver and commands
This change adds CBFS support and some commands to use it to u-boot. These
commands are:

cbfsinit - Initialize CBFS support and pull all metadata into RAM. The end of
the ROM is an optional parameter which defaults to the standard 0xffffffff and
can be used to support multiple CBFSes in a system. The last one set up with
cbfsinit is the one that will be used.

cbfsinfo - Print information from the CBFS header.

cbfsls - Print out the size, type, and name of all the files in the current
CBFS. Recognized types are translated into symbolic names.

cbfsload - Load a file from CBFS into memory. Like the similar command for fat
filesystems, you can optionally provide a maximum size.

Support for CBFS is compiled in when the CONFIG_CMD_CBFS option is specified.

The CBFS driver can also be used programmatically from within u-boot.

If u-boot needs something out of CBFS very early before the heap is
configured, it won't be able to use the normal CBFS support which caches some
information in memory it allocates from the heap. The
cbfs_file_find_uncached function searches a CBFS instance without touching
the heap.

Signed-off-by: Gabe Black <gabeblack@google.com>
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-10-22 08:29:55 -07:00
Marek Vasut
ff04f6d122 fs: fat: Fix mkcksum() function parameters
The mkcksum() function now takes one parameter, the pointer to
11-byte wide character array, which it then operates on.

Currently, the function is wrongly passed (dir_entry)->name, which
is only 8-byte wide character array. Though by further inspecting
the dir_entry structure, it can be noticed that the name[8] entry
is immediatelly followed by ext[3] entry. Thus, name[8] and ext[3]
in the dir_entry structure actually work as this 11-byte wide array
since they're placed right next to each other by current compiler
behavior.

Depending on this is obviously wrong, thus fix this by correctly
passing both (dir_entry)->name and (dir_entry)->ext to the mkcksum()
function and adjust the function appropriately.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@ti.com>
2012-10-17 07:59:11 -07:00
Albert ARIBAUD
b823fd9ba5 ARM: prevent misaligned array inits
Under option -munaligned-access, gcc can perform local char
or 16-bit array initializations using misaligned native
accesses which will throw a data abort exception. Fix files
where these array initializations were unneeded, and for
files known to contain such initializations, enforce gcc
option -mno-unaligned-access.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
[trini: Switch to usign call cc-option for -mno-unaligned-access as
Albert had done previously as that's really correct]
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-15 11:53:07 -07:00
Anatolij Gustschin
8cc64bafc0 yaffs2: Fix GCC 4.6 compile warnings
Fix:
yaffs_guts.c: In function 'yaffs_check_chunk_erased':
yaffs_guts.c:324:6: warning: variable 'result' set but not used
[-Wunused-but-set-variable]
yaffs_guts.c: In function 'yaffs_verify_chunk_written':
yaffs_guts.c:352:6: warning: variable 'result' set but not used
[-Wunused-but-set-variable]
yaffs_guts.c: In function 'yaffs_grab_chunk_cache':
yaffs_guts.c:1488:6: warning: variable 'pushout' set but not used
[-Wunused-but-set-variable]
yaffs_guts.c: In function 'yaffs_check_obj_details_loaded':
yaffs_guts.c:3180:6: warning: variable 'alloc_failed' set but not used
[-Wunused-but-set-variable]
yaffs_guts.c:3179:6: warning: variable 'result' set but not used
[-Wunused-but-set-variable]
yaffs_guts.c: In function 'yaffs_update_oh':
yaffs_guts.c:3288:6: warning: variable 'result' set but not used
[-Wunused-but-set-variable]
yaffs_guts.c: In function 'yaffs_get_obj_name':
yaffs_guts.c:4447:7: warning: variable 'result' set but not used
[-Wunused-but-set-variable]
yaffs_summary.c: In function 'yaffs_summary_read':
yaffs_summary.c:194:6: warning: variable 'sum_tags_bytes' set but not
used [-Wunused-but-set-variable]
yaffs_verify.c: In function 'yaffs_verify_file':
yaffs_verify.c:227:6: warning: variable 'actual_depth' set but not used
[-Wunused-but-set-variable]
yaffs_yaffs1.c: In function 'yaffs1_scan':
yaffs_yaffs1.c:26:6: warning: variable 'result' set but not used
[-Wunused-but-set-variable]
yaffs_yaffs2.c: In function 'yaffs2_scan_chunk':
yaffs_yaffs2.c:949:6: warning: variable 'result' set but not used
[-Wunused-but-set-variable]
yaffs_yaffs2.c: In function 'yaffs2_scan_backwards':
yaffs_yaffs2.c:1352:6: warning: variable 'deleted' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Charles Manning <cdhmanning@gmail.com>
Tested-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2012-10-08 11:15:04 -07:00
Stephen Warren
bd1a7e3034 FAT: check for partition 0 not 1 for whole-disk fs
The recent switch to use get_device_and_partition() from do_fat_ls()
broke the ability to access a FAT filesystem directly on a whole device;
FAT only works within a partition on a device.

This change makes e.g. "fatls mmc 0:0" work; explicitly requesting
partition ID 0 is something that get_device_and_partition() fully
supports. However, fat_register_device() expects partition ID 1 to be
used in the full-disk case; partition ID 1 was previously implicitly
specified when the user didn't actually specify a partition ID. Update
fat_register_device() to expect the correct ID.

This change does imply that if a user explicitly executes "fatls mmc 0:1"
then this will fail, and may be a change in behaviour.

Note that this still prevents "fatls mmc 0:auto" from working. The next
patch will fix that.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-08 11:15:04 -07:00
Simon Glass
73c15c634d ext4: Rename block group descriptor table from gd to bgd
On x86 machines gd is unfortunately a #define, so we should avoid using
gd for anything. This patch changes uses of gd to bgd so that ext4fs
can be used on x86.

A better fix would be to remove the #define in x86, but I'm not sure
how to do that.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-10-03 18:21:33 -07:00
Benoît Thébaudeau
1170e634dd FAT: Make it possible to read from any file position
When storage devices contain files larger than the embedded RAM, it is
useful to be able to read these files by chunks, e.g. for a software
update to the embedded NAND Flash from an external storage device (USB
stick, SD card, etc.).

Hence, this patch makes it possible by adding a new FAT API to read
files from a given position. This patch also adds this feature to the
fatload command.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Wolfgang Denk <wd@denx.de>
Signed-off-by: Tom Rini <trini@ti.com>
2012-09-26 11:11:32 -07:00
Rob Herring
650f36641c cmd_reiser: use common get_device_and_partition function
Convert reiserload and reiserls to use common device and partition parsing
function. With the common function "dev:part" can come from the
environment and a '-' can be used in that case.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-09-25 14:49:18 -07:00
Rob Herring
4120457044 cmd_zfs: use common get_device_and_partition function
Convert zfsload and zfsls to use common device and partition parsing
function. With the common function "dev:part" can come from the
environment and a '-' can be used in that case.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-09-25 14:49:17 -07:00
Rob Herring
81180819b8 cmd_extX: use common get_device_and_partition function
Convert ext2/4 load, ls, and write functions to use common device and
partition parsing function. With the common function "dev:part" can come
from the environment and a '-' can be used in that case.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-09-25 14:46:55 -07:00
Rob Herring
9450106296 ext4: remove init_fs/deinit_fs
There's no real need to expose this and it can be removed by using a static
allocation.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-09-25 14:46:35 -07:00
Tom Rini
5fb29f3c48 Merge branch 'ext4'
Update Makefile change for LIBS -> LIBS-y change.

Conflicts:
	Makefile

Signed-off-by: Tom Rini <trini@ti.com>
2012-09-20 11:27:35 -07:00
Stephen Warren
55b523b7d4 ext4: cache-align buffers so the invalidation works
DMA buffer cache invalidation requires that buffers have cache-aligned
buffer locations and sizes. Use memalign() and ALLOC_CACHE_ALIGN_BUFFER()
to ensure this.

On Tegra at least, without this fix, the following fail commands fail in
u-boot-master/ext4, but succeeded at the branch's branch point in
u-boot/master. With this fix, the commands work again:

ext2ls mmc 0:1 /
ext2load mmc 0:1 /boot/zImage

Cc: Uma Shankar <uma.shankar@samsung.com>
Cc: Manjunatha C Achar <a.manjunatha@samsung.com>
Cc: Iqbal Shareef <iqbal.ams@samsung.com>
Cc: Hakgoo Lee <goodguy.lee@samsung.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Tom Rini <trini@ti.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-20 11:07:26 -07:00
Benoît Thébaudeau
7ee46cebcb FAT: Fix file contents listed as directory
With:
fatls mmc 0 /dir/file
dir: regular directory
file: regular file

The previous code read the contents of file as if it were directory entries to
list. This patch refuses to list file contents as if it were a folder.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Wolfgang Denk <wd@denx.de>
2012-09-18 12:01:53 -07:00
Veli-Pekka Peltola
8044c1387f ubifs: Fix ubifsload when using ZLIB
Using ZLIB compression with UBIFS fails if last data node is not a size of
UBIFS_BLOCK_SIZE (4096 bytes).

Easiest way to test this is trying to read a file smaller than 4k:
=> ubifsload 41000000 /etc/fstab
Loading file '/etc/fstab' to addr 0x41000000 with size 704 (0x000002c0)...
UBIFS error (pid 0): read_block: bad data node (block 0, inode 2506)
UBIFS error (pid 0): do_readpage: cannot read page 0 of inode 2506, error -22
Error reading file '/etc/fstab'
/etc/fstab not found!
exit not allowed from main input shell.
=>

With this patch:

=> ubifsload 41000000 /etc/fstab
Loading file '/etc/fstab' to addr 0x41000000 with size 704 (0x000002c0)...
Done
=>

Signed-off-by: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
Cc: kmpark@infradead.org
Tested-by: Andreas Bießmann <andreas.devel@googlemail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2012-09-10 11:37:42 +02:00
Stefan Roese
be73913b91 ubifs: Fix memory leak in ubifs_finddir
This patch fixes a memory leak in ubifs_finddir().

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: dev.ma.dma@gmail.com
2012-09-03 11:37:50 +02:00
Benoît Thébaudeau
0880e5bb0c FAT: Simplify get_contents
One call to get_cluster can be factorized with another, so avoid
duplicating code.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Wolfgang Denk <wd@denx.de>
2012-09-02 17:22:43 +02:00
Benoît Thébaudeau
cc63b25efb FAT: get_cluster: Add buffer bouncing
Add a buffer bouncing mechanism to get_cluster.  This can be useful
for misaligned applicative buffers passed through get_contents.
This is required for the following patches in the case of data
aligned differently relatively to buffers and clusters.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Wolfgang Denk <wd@denx.de>
2012-09-02 17:22:10 +02:00
Benoît Thébaudeau
cd1b042c5c FAT: Fix redundant sector read
With the previous code, the remaining prefetched sectors were read
again after each sector.  With this patch, each sector is read only
once, thus making the prefetch useful.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Wolfgang Denk <wd@denx.de>
2012-09-02 17:16:08 +02:00
Benoît Thébaudeau
88503ad3bb FAT: cosmetic: Remove useless assignment
fatlength is not used after this assignment, so it is useless and can
be removed.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Wolfgang Denk <wd@denx.de>
2012-09-02 17:15:16 +02:00
Benoît Thébaudeau
8006dd2e57 FAT: get_fatent: Fix FAT boundary check
startblock must be taken into account in order not to read past the
end of the FAT.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Wolfgang Denk <wd@denx.de>
2012-09-02 17:14:30 +02:00
Benoît Thébaudeau
9795e07b04 FAT: cosmetic: Remove extra spaces
Remove spaces before opening parentheses in function calls.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Wolfgang Denk <wd@denx.de>
2012-09-02 17:13:18 +02:00
Charles Manning
74f45b739b u-boot yaffs2: Fix compilation warnings
Also remove yaffs_hweight and use the hweight in u-boot.

Signed-off-by: Charles Manning <cdhmanning@gmail.com>
2012-09-02 16:47:50 +02:00
Uma Shankar
ed34f34dba ext4fs write support
Signed-off-by: Uma Shankar <uma.shankar@samsung.com>
Signed-off-by: Manjunatha C Achar <a.manjunatha@samsung.com>
Signed-off-by: Iqbal Shareef <iqbal.ams@samsung.com>
Signed-off-by: Hakgoo Lee <goodguy.lee@samsung.com>
2012-08-09 23:48:02 +02:00
Uma Shankar
a1596438a6 ext4fs ls load support
Signed-off-by: Uma Shankar <uma.shankar@samsung.com>
Signed-off-by: Manjunatha C Achar <a.manjunatha@samsung.com>
Signed-off-by: Iqbal Shareef <iqbal.ams@samsung.com>
Signed-off-by: Hakgoo Lee <goodguy.lee@samsung.com>
2012-08-09 23:47:43 +02:00
Jorgen Lundman
4d3c95f5ea zfs: Add ZFS filesystem support
U-Boot port is based on sources forked from GRUB-0.97 by Sun in 2004,
which can be found here:
http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/grub/grub-0.97/stage2/zfs-include/zfs.h

Released by Sun for GRUB under the license:
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
  *  the Free Software Foundation; either version 2 of the License, or
  *  (at your option) any later version.

GRUB official releases include ZFS in version:
ftp://alpha.gnu.org/gnu/grub/grub-1.99~rc1.tar.gz

And patched against GRUB Bazaar repository for ashift fixes (4KB HDDs)
more conveniently found at github:
e7b6ef3ac3

Signed-off-by: Jorgen Lundman <lundman@lundman.net>
2012-08-09 23:42:20 +02:00
Charles Manning
753ac61088 u-boot: Update yaffs2 file system
This patch updates the yaffs2 in u-boot to correspond to
git://www.aleph1.co.uk/yaffs2
commit id 9ee5d0643e559568dbe62215f76e0a7bd5a63d93

Signed-off-by: Charles Manning <cdhmanning@gmail.com>
2012-08-09 23:39:18 +02:00
Bernhard Walle
f75325e192 UBIFS: Improve error message when reading superblock failed
In addition to the error message also display the error code. I had the
problem that my malloc memory was not enough (ENOMEM), and if u-boot
had displayed the error code immediately that would have saved me some
debugging.

Signed-off-by: Bernhard Walle <walle@corscience.de>

Use ubifs_err instead of printf.
Add "errno=%d" in output as suggested by Albert Aribaud.

Signed-off-by: Thomas Weber <weber@corscience.de>
2012-08-09 22:12:16 +02:00
Tom Rini
94c1a20fe7 ext2fs: fix warning: 'blocknxt' may be used uninitialized with gcc 4.2
The above warning was introduced originally in 436da3c "ext2load:
increase read speed" and fixed for newer toolchains in b803273 "ext2fs:
fix warning: 'blocknxt' may be used uninitialized".  This change did not
fix the warning with gcc 4.2, as found in ELDK 4.2.

If we rework the while loop to initalize blocknxt before entering the
warning really goes away.  Tested on am335x with an approx 7mb file and
crc32 in U-Boot befor and after this change.

Cc: Wolfgang Denk <wd@denx.de>
Cc: Eric Nelson <eric.nelson@boundarydevices.com>
Cc: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Jason Cooper <u-boot@lakedaemon.net>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
Cc: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Tom Rini <trini@ti.com>
2012-08-07 20:52:42 +02:00
Kim Phillips
b8032734ee ext2fs: fix warning: 'blocknxt' may be used uninitialized
This warning was introduced in 436da3c "ext2load: increase read
speed":

ext2fs.c: In function 'ext2fs_read_file':
ext2fs.c:458:19: warning: 'blocknxt' may be used uninitialized in this function [-Wuninitialized]

this change makes it go away.

Cc: Eric Nelson <eric.nelson@boundarydevices.com>
Cc: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Jason Cooper <u-boot@lakedaemon.net>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2012-07-08 22:55:04 +02:00
u-boot@lakedaemon.net
436da3cd23 ext2load: increase read speed
This patch dramatically drops the amount of time u-boot needs to read a
file from an ext2 partition.  On a typical 2 to 5 MB file (kernels and
initrds) it goes from tens of seconds to a couple seconds.

All we are doing here is grouping contiguous blocks into one read.

Boot tested on Globalscale Technologies Dreamplug (Kirkwood ARM SoC)
with three different files.  sha1sums were calculated in Linux
userspace, and then confirmed after ext2load.

Signed-off-by: Jason Cooper <u-boot@lakedaemon.net>
Tested-by: Eric Nelson <eric.nelson@boundarydevices.com>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-06-21 22:49:33 +02:00
Marek Vasut
b37d41aa24 Block: Remove MG DISK support
This driver is unused and obsolete.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: unsik Kim <donari75@gmail.com>
2012-06-21 20:53:09 +02:00
Mike Frysinger
7b15e2bb9b linux/compat.h: rename from linux/mtd/compat.h
This lets us use it in more places than just mtd code.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-04-30 16:54:51 +02:00
Mike Frysinger
e3ed0575a7 gunzip: rename z{alloc, free} to gz{alloc, free}
This allows us to add a proper zalloc() func (one that does a zeroing
alloc), and removes duplicate prototypes.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-04-30 16:54:51 +02:00
Eric Nelson
9a800ac718 fs/fat: align disk buffers on cache line to enable DMA and cache
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2012-04-30 16:54:50 +02:00
Anatolij Gustschin
bf6b6af746 fs/fat/fat_write.c: Fix GCC 4.6 warnings
Fix:
fat_write.c: In function 'find_directory_entry':
fat_write.c:826:8: warning: variable 'prevcksum' set but not used
[-Wunused-but-set-variable]
fat_write.c: In function 'do_fat_write':
fat_write.c:933:6: warning: variable 'root_cluster' set but not used
[-Wunused-but-set-variable]
fat_write.c:925:12: warning: variable 'slotptr' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Donggeun Kim <dg77.kim@samsung.com>
Acked-by: Maximilian Schwerin <mvs@tigris.de>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-03-26 10:58:54 +02:00
Donggeun Kim
079df7223c FAT write: Fix compile errors
This patch removes compile errors introduced by
commit 9813b750f3
'fs/fat: Fix FAT detection to support non-DOS partition tables'

fat_write.c: In function 'disk_write':
fat_write.c:54: error: 'part_offset' undeclared (first use in this function)
fat_write.c:54: error: (Each undeclared identifier is reported only once
fat_write.c:54: error: for each function it appears in.)
fat_write.c: In function 'do_fat_write':
fat_write.c:950: error: 'part_size' undeclared (first use in this function)

These errors only appear when this code is enabled by
defining CONFIG_FAT_WRITE option.

This patch was originally part of

http://article.gmane.org/gmane.comp.boot-loaders.u-boot/121847

Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Maximilian Schwerin <mvs@tigris.de>

Fixed patch author and added all needed SoB from the original patch
and also submitter's SoB. Extended commit log.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2012-03-24 23:27:32 +01:00
Donggeun Kim
627182ea9d FAT: update the second FAT when writing a file
After susccessful write to the FAT partition,
fsck program may print warning message due to different FAT,
provided that the filesystem supports two FATs.

This patch makes the second FAT to be same with the first one
when writing a file.

Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-01-05 20:10:38 +01:00
Kyle Moffett
46236b1407 fs/fat: Improve error handling
The FAT filesystem fails silently in inexplicable ways when given a
filesystem with a block-size that does not match the device sector size.
In theory this is not an unsupportable combination but requires a major
rewrite of a lot of the filesystem.  Until that occurs, the filesystem
should detect that scenario and display a helpful error message.

This scenario in particular occurred on a 512-byte blocksize FAT fs
stored in an El-Torito boot volume on a CD-ROM (2048-byte sector size).

Additionally, in many circumstances the ->block_read method will not
return a negative number to indicate an error but instead return 0 to
indicate the number of blocks successfully read (IE: None).

The FAT filesystem should defensively check to ensure that it got all of
the sectors that it asked for when reading.

Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
2012-01-05 20:10:37 +01:00
Kyle Moffett
9813b750f3 fs/fat: Fix FAT detection to support non-DOS partition tables
The FAT filesystem code currently ends up requiring that the partition
table be a DOS MBR, as it checks for the DOS 0x55 0xAA signature on the
partition table (which may be Mac, EFI, ISO9660, etc) before actually
computing the partition offset.

This fixes support for accessing a FAT filesystem in an ISO9660 boot
volume (El-Torito format) by reordering the filesystem checks and
reading the 0x55 0xAA "DOS boot signature" and FAT/FAT32 magic number
from the first sector of the partition instead of from sector 0.

Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>

Fix build warning:  fat.c: In function 'fat_register_device':
fat.c:66:15: warning: variable 'found_partition' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Wolfgang Denk <wd@denx.de>
2012-01-05 20:10:06 +01:00
Simon Glass
26784f1ecb ext2: Cache line align indirection buffers
Make ext2 use cache line aligned buffers for reading from the filesystem.
This is needed when caches are enabled because unaligned cache invalidates
are not safe.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-01-05 17:12:11 +01:00
Sergei Shtylyov
bf34e7d952 fat: reset VFAT short alias checksum on first match
The VFAT short alias checksum read from a long file name is only overwritten
when another long file name appears in a directory list. Until then it renders
short file names invisible that have the same checksum. Reset the checksum on
first match.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Martin Mueller <martin.mueller5@de.bosch.com>
2012-01-05 16:03:24 +01:00
Wolfgang Denk
bfcc40bb09 Merge branch 'next' of ../next
* 'next' of ../next:
  mkenvimage: Add version info switch (-V)
  mkenvimage: Fix getopt() error handling
  mkenvimage: Fix some typos
  phy: add Micrel KS8721BL phy definition
  net: introduce per device index
  mvgbe: remove setting of ethaddr within the driver
  x86: Add support for specifying an initrd with the zboot command
  x86: Refactor the zboot innards so they can be reused with a vboot image
  x86: Add infrastructure to extract an e820 table from the coreboot tables
  x86: Add support for booting Linux using the 32 bit boot protocol
  x86: Clean up the x86 zimage code in preparation to extend it
  x86: Import code from coreboot's libpayload to parse the coreboot table
  x86: Initial commit for running as a coreboot payload
  CHECKPATCH: ./board/esd/hh405/logo_320_240_8bpp.c
  CHECKPATCH: ./board/esd/hh405/logo_1024_768_8bpp.c
  CHECKPATCH: ./board/esd/hh405/logo_320_240_4bpp.c
  CHECKPATCH: ./board/esd/hh405/logo_640_480_24bpp.c
  CHECKPATCH: ./board/esd/apc405/logo_640_480_24bpp.c
  CHECKPATCH: ./board/esd/voh405/logo_320_240_4bpp.c
  CHECKPATCH: ./board/esd/voh405/logo_640_480_24bpp.c
  CHECKPATCH: ./board/esd/hh405/fpgadata.c
  CHECKPATCH: ./board/esd/pci405/fpgadata.c
  CHECKPATCH: ./board/esd/tasreg/fpgadata.c
  CHECKPATCH: ./board/esd/apc405/fpgadata.c
  CHECKPATCH: ./board/esd/voh405/fpgadata.c
  CHECKPATCH: ./board/esd/ash405/fpgadata.c
  CHECKPATCH: ./board/esd/dasa_sim/fpgadata.c
  CHECKPATCH: ./board/esd/ar405/fpgadata_xl30.c
  CHECKPATCH: ./board/esd/ar405/fpgadata.c
  CHECKPATCH: ./board/esd/plu405/fpgadata.c
  CHECKPATCH: ./board/esd/wuh405/fpgadata.c
  CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci405.c
  CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci405ab.c
  CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci4052.c
  CHECKPATCH: ./board/esd/canbt/fpgadata.c
  CHECKPATCH: ./board/esd/du405/fpgadata.c
  CHECKPATCH: ./board/esd/cpciiser4/fpgadata.c
  CHECKPATCH: ./board/dave/PPChameleonEVB/fpgadata.c
  avr32:mmu.c: fix printf() length modifier
  fat.c: fix printf() length modifier
  cmd_sf.c: fix printf() length modifier
  Make printf and vprintf safe from buffer overruns
  vsprintf: Move function documentation into header file
  Add safe vsnprintf and snprintf library functions
  Move vsprintf functions into their own header

Conflicts:
	tools/mkenvimage.c

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-12-23 20:53:58 +01:00
Anatolij Gustschin
8506eb8d6a FAT: fix some issues in FAT write support code
Writing a file to the FAT partition didn't work while a
test using a CF card. The test was done on mpc5200 based
board (powerpc). There is a number of problems in FAT
write code:

Compiler warning:
fat_write.c: In function 'file_fat_write':
fat_write.c:326: warning: 'counter' may be used uninitialized
in this function
fat_write.c:326: note: 'counter' was declared here

'l_filename' string is not terminated, so a file name
with garbage at the end is used as a file name as shown
by debug code.

Return value of set_contents() is not checked properly
so actually a file won't be written at all (as checked
using 'fatls' after a write attempt with 'fatwrite'
command).

do_fat_write() doesn't return the number of written bytes
if no error happened. However the return value of this
function is used to show the number of written bytes
in do_fat_fswrite().

The patch adds some debug code and fixes above mentioned
problems and also fixes a typo in error output.

NOTE: after a successful write to the FAT partition (under
U-Boot) the partition was checked under Linux using fsck.
The partition needed fixing FATs:
-bash-3.2# fsck -a /dev/sda1
fsck 1.39 (29-May-2006)
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
FATs differ but appear to be intact. Using first FAT.
Performing changes.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Donggeun Kim <dg77.kim@samsung.com>
Cc: Aaron Williams <Aaron.Williams@cavium.com>
Acked-by: Donggeun Kim <dg77.kim@samsung.com>
2011-12-20 23:18:43 +01:00
Andreas Bießmann
2d1b83b346 fat.c: fix printf() length modifier
The DIRENTSPERBLOCK utilizes sizeof() which will return a size_t which has no
fixed size. Therefor use correct length modifer for printf() statement to
prevent compiler warnings.

This patch fixes following warning:

---8<---
fat.c: In function 'do_fat_read':
fat.c:879: warning: format '%d' expects type 'int', but argument 4 has type 'long unsigned int'
--->8---

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
cc: Mike Frysinger <vapier@gentoo.org>
cc: Thomas Chou <thomas@wytron.com.tw>
cc: rjones@nexus-tech.net
cc: kharris@nexus-tech.net
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-12-17 23:56:40 +01:00
Anatolij Gustschin
fa75f51561 fs/reiserfs/reiserfs.c: Fix compiler warning
Fix:
reiserfs.c: In function 'reiserfs_mount':
reiserfs.c:360:22: warning: dereferencing type-punned pointer
will break strict-aliasing rules [-Wstrict-aliasing]

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-12-12 14:25:30 +01:00
Wolfgang Denk
5c2db13a2a fs/yaffs2/yaffs_guts.c: Fix GCC 4.6 compile warning (and bug)
Fix:
yaffs_guts.c: In function 'yaffs_GarbageCollectBlock':
yaffs_guts.c:2761:6: warning: variable 'retVal' set but not used
[-Wunused-but-set-variable]

Here GCC actually detected a bug.  The code was always returning OK
instead of the previously set retrun code.  Fix that.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: William Juul <wiljuul@cisco.com>
Cc: Scott Wood <scottwood@freescale.com>
Acked-by: William Juul <wiljuul@cisco.com>
2011-12-10 23:08:49 +01:00
Simon Glass
986bb0e6a0 Fix warnings in yaffs
Sorry if this is already fixed somewhere - I could not find it.

This fixes the warnings show below.

yaffs_tagscompat.c: In function 'yaffs_TagsCompatabilityReadChunkWithTagsFromNAND':
yaffs_tagscompat.c:151: warning: dereferencing pointer 'tu' does break strict-aliasing rules
yaffs_tagscompat.c:150: warning: dereferencing pointer 'tu' does break strict-aliasing rules
yaffs_tagscompat.c:149: warning: dereferencing pointer 'tu' does break strict-aliasing rules
yaffs_tagscompat.c:148: warning: dereferencing pointer 'tu' does break strict-aliasing rules
yaffs_tagscompat.c:147: warning: dereferencing pointer 'tu' does break strict-aliasing rules
yaffs_tagscompat.c:146: warning: dereferencing pointer 'tu' does break strict-aliasing rules
yaffs_tagscompat.c:145: warning: dereferencing pointer 'tu' does break strict-aliasing rules
yaffs_tagscompat.c:144: warning: dereferencing pointer 'tu' does break strict-aliasing rules
yaffs_tagscompat.c:141: note: initialized from here

Signed-off-by: Simon Glass <sjg@chromium.org>
2011-11-16 21:39:17 +01:00
Anatolij Gustschin
360ab45089 fs/yaffs2/yaffs_guts.c: Fix some GCC 4.6 warnings
Fix:
yaffs_guts.c: In function 'yaffs_CheckChunkErased':
yaffs_guts.c:854:6: warning: variable 'result' set but not used
yaffs_guts.c: In function 'yaffs_UpdateObjectHeader':
yaffs_guts.c:3463:6: warning: variable 'result' set but not used
yaffs_guts.c: In function 'yaffs_GrabChunkCache':
yaffs_guts.c:3774:6: warning: variable 'pushout' set but not used
yaffs_guts.c: In function 'yaffs_Scan':
yaffs_guts.c:5237:6: warning: variable 'result' set but not used
yaffs_guts.c: In function 'yaffs_CheckObjectDetailsLoaded':
yaffs_guts.c:5748:6: warning: variable 'alloc_failed' set but not used
yaffs_guts.c:5747:6: warning: variable 'result' set but not used
yaffs_guts.c: In function 'yaffs_ScanBackwards':
yaffs_guts.c:5808:6: warning: variable 'deleted' set but not used
yaffs_guts.c:5806:6: warning: variable 'result' set but not used
yaffs_guts.c: In function 'yaffs_GetObjectName':
yaffs_guts.c:6657:7: warning: variable 'result' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-16 21:37:19 +01:00
Wolfgang Denk
6471ada534 fs/fat/fat.c: Fix GCC 4.6 build warning
Fix:
fat.c: In function 'fat_register_device':
fat.c:74:19: warning: variable 'info' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07 22:11:20 +01:00
Marek Vasut
4754c82372 GCC4.6: Squash warnings in yaffs_guts.c
yaffs_guts.c: In function 'yaffs_ReadDataFromFile':
yaffs_guts.c:4461:8: warning: 'chunk' may be used uninitialized in this function
yaffs_guts.c:4462:8: warning: 'start' may be used uninitialized in this function
yaffs_guts.c: In function 'yaffs_WriteDataToFile':
yaffs_guts.c:4581:8: warning: 'chunk' may be used uninitialized in this function
yaffs_guts.c:4582:8: warning: 'start' may be used uninitialized in this function
yaffs_guts.c: In function 'yaffs_ResizeFile':
yaffs_guts.c:4816:8: warning: 'newSizeOfPartialChunk' may be used uninitialized
in this function
yaffs_guts.c:4817:8: warning: 'newFullChunks' may be used uninitialized in this
function

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: William Juul <william.juul@tandberg.com>
2011-10-27 23:54:09 +02:00
Marek Vasut
4b41478c66 GCC4.6: Drop dead code from yaffs_guts.c
Drop yaffs_DeleteWorker():
yaffs_guts.c:1556:12: warning: 'yaffs_DeleteWorker' defined but not used

Drop yaffs_VerifyTnodeWorker():
yaffs_guts.c:600:12: warning: 'yaffs_VerifyTnodeWorker' defined but not used

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27 23:54:09 +02:00
J. Vijayanand
206d68fdd4 fat: correct ATTR_VFAT check
ATTR_VFAT condition requires multiple bits to be set but the present
condition checking in do_fat_read() & get_dentfromdir() ends up
passing on even a single bit being set.

Signed-off-by: J. Vijayanand <vijayanand.jayaraman@in.bosch.com>
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
2011-10-27 23:53:57 +02:00
Wolfgang Denk
e116cc069f fs/fat/fat.c: fix warning: 'part_size' defined but not used
Commit c30a15e "FAT: Add FAT write feature" introduced a compiler
warning.  Fix this.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Donggeun Kim <dg77.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
2011-10-27 23:53:57 +02:00
Donggeun Kim
c30a15e590 FAT: Add FAT write feature
In some cases, saving data in RAM as a file with FAT format is required.
This patch allows the file to be written in FAT formatted partition.

The usage is similar with reading a file.
First, fat_register_device function is called before file_fat_write function
in order to set target partition.
Then, file_fat_write function is invoked with desired file name,
start ram address for writing data, and file size.

Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-10-26 21:40:44 +02:00
Anton staaf
4c1cd721d8 ext2: Cache line aligned partial sector bounce buffer
Currently, if a device read request is done that does not begin or end
on a sector boundary a stack allocated bounce buffer is used to perform
the read, and then just the part of the sector that is needed is copied
into the users buffer.  This stack allocation can mean that the bounce
buffer will not be aligned to the dcache line size.  This is a problem
when caches are enabled because unaligned cache invalidates are not
safe.

This patch uses ALLOC_CACHE_ALIGN_BUFFER to create a stack allocated
cache line size aligned bounce buffer.

Signed-off-by: Anton Staaf <robotboy@chromium.org>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Dave Liu <r63238@freescale.com>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>

Change-Id: I32e1594d90ef039137bb219b0f7ced55768744ff
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-25 09:25:41 +02:00
Mike Frysinger
464c79207c punt unused clean/distclean targets
The top level Makefile does not do any recursion into subdirs when
cleaning, so these clean/distclean targets in random arch/board dirs
never get used.  Punt them all.

MAKEALL didn't report any errors related to this that I could see.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-15 22:20:36 +02:00
Lars Poeschel
349a8d5e56 ubifs bad superblock bug
This patch fixes an issue when ubifs reads a bad superblock. Later it
tries to free memory, that was not allocated, which freezes u-boot.
This is fixed by looking for a non null pointer before free.

The message I got before u-boot freezes:
UBI: max/mean erase counter: 53/32
UBIFS: mounted UBI device 0, volume 1, name "rootfs"
UBIFS: mounted read-only
UBIFS: file system size:   49140 bytes (50319360 KiB, 0 MiB, 49140 LEBs)
UBIFS: journal size:       49 bytes (6838272 KiB, 0 MiB, 6678 LEBs)
UBIFS: media format:       w4/r0 (latest is w4/r0)
UBIFS: default compressor: LZO
UBIFS: reserved for root:  0 bytes (0 KiB)
UBIFS error (pid 0): ubifs_read_node: bad node type (255 but expected 9)
UBIFS error (pid 0): ubifs_read_node: bad node at LEB 330:13104
UBIFS error (pid 0): ubifs_iget: failed to read inode 1, error -22
Error reading superblock on volume 'ubi:rootfs'!

Signed-off-by: Lars Poeschel <larsi@wh2.tu-dresden.de>
Cc: Kyungmin Park <kmpark@infradead.org>
Signed-off-by: Stefan Roese <sr@denx.de>
2011-10-12 11:33:17 +02:00
Wolfgang Denk
16b9afd2b3 fs/jffs2/jffs2_1pass.c: fix warning: variable ... set but not used
Fix:
jffs2_1pass.c: In function 'jffs2_1pass_read_inode':
jffs2_1pass.c:699:7: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
jffs2_1pass.c: In function 'jffs2_1pass_build_lists':
jffs2_1pass.c:1578:14: warning: variable 'empty_start' set but not used [-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-10-09 23:24:49 +02:00
Sergei Shtylyov
025421eab4 fat: replace LINEAR_PREFETCH_SIZE with PREFETCH_BLOCKS
Currently in do_fat_read() when reading FAT sectors, we have to divide down
LINEAR_PREFETCH_SIZE by the sector size, whereas it's defined as 2 sectors
worth of bytes. In order to avoid redundant multiplication/division, introduce
#define PREFETCH_BLOCKS instead of #define LINEAR_PREFETCH_SIZE.

Signed-off-by: Sergei Shtylyov <sshtylyov@mvista.com>
2011-10-01 21:52:19 +02:00
Sergei Shtylyov
40e219165b fat: root directory cluster only makes sense for FAT32
The root directory cluster field only exists in a FAT32 boot sector, so the
'root_cluster' variable in do_fat_read() contains garbage in case of FAT12/16.
Make it contain 0 instead as this is what is passed to get_vfatname() in that
case anyway.

Signed-off-by: Sergei Shtylyov <sshtylyov@mvista.com>
2011-10-01 21:52:06 +02:00
Sergei Shtylyov
60b36f0fc7 fat: cannot compare bytes and sectors
The code multiples the FAT size in sectors by the sector size and then tries to
compare that to the number of sectors in the 'getsize' variable.  While fixing
this, also change the initial value of 'getsize' as the division of FATBUFSIZE
by the sector size gets us FATBUFBLOCKS.

Signed-off-by: Sergei Shtylyov <sshtylyov@mvista.com>
2011-10-01 21:51:23 +02:00
Sergei Shtylyov
ac4977719e fat: fix crash with big sector size
Apple iPod nanos have sector sizes of 2 or 4 KiB, which crashes U-Boot when it
tries to read the boot sector into 512-byte buffer situated on stack. Make the
FAT code indifferent to the sector size.

Signed-off-by: Sergei Shtylyov <sshtylyov@mvista.com>
2011-10-01 21:50:39 +02:00
Wolfgang Denk
aaf6935b22 UBIFS: fix warning: format '%lX' expects type 'long unsigned int'
Commit 46d7274 "UBIFS: Change ubifsload to set the filesize variable"
introduced the follwing compiler warning:

ubifs.c: In function 'ubifs_load':
ubifs.c:742: warning: format '%lX' expects type 'long unsigned int', but argument 3 has type 'u32'

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Bastian Ruppert <Bastian.Ruppert@Sewerin.de>
2011-09-10 01:10:32 +02:00
Bastian Ruppert
46d7274cdc UBIFS: Change ubifsload to set the filesize variable
This is the same behaviour like tftp or fatload command.

Signed-off-by: Bastian Ruppert <Bastian.Ruppert@Sewerin.de>
CC: kmpark@infradead.org
Acked-by: Detlev Zundel <dzu@denx.de>
2011-09-10 00:04:29 +02:00
Wolfgang Denk
068d6f9a26 YAFFS2: fs/yaffs2/yaffs_guts.c - fix build warnings
Fix these:
yaffs_guts.c: In function 'yaffs_ReadDataFromFile':
yaffs_guts.c:4622: warning: pointer targets in passing argument 3 of 'yaffs_AddrToChunk' differ in signedness
yaffs_guts.c:4622: warning: pointer targets in passing argument 4 of 'yaffs_AddrToChunk' differ in signedness
yaffs_guts.c: In function 'yaffs_WriteDataToFile':
yaffs_guts.c:4745: warning: pointer targets in passing argument 3 of 'yaffs_AddrToChunk' differ in signedness
yaffs_guts.c:4745: warning: pointer targets in passing argument 4 of 'yaffs_AddrToChunk' differ in signedness
yaffs_guts.c: In function 'yaffs_ResizeFile':
yaffs_guts.c:4968: warning: pointer targets in passing argument 3 of 'yaffs_AddrToChunk' differ in signedness
yaffs_guts.c:4968: warning: pointer targets in passing argument 4 of 'yaffs_AddrToChunk' differ in signedness
yaffs_guts.c: In function 'yaffs_GutsInitialise':
yaffs_guts.c:7235: warning: assignment from incompatible pointer type
yaffs_guts.c: In function 'yaffs_CreateNewObject':
yaffs_guts.c:2143: warning: 'tn' may be used uninitialized in this function
yaffs_guts.c: In function 'yaffs_MknodObject':
yaffs_guts.c:2258: warning: 'str' may be used uninitialized in this function

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-10 00:00:32 +02:00
Wolfgang Denk
3da04743b8 YAFFS2: fs/yaffs2/yaffs_guts.c - fix build warnings
Fix these:
yaffs_guts.c: At top level:
yaffs_guts.c:400: warning: 'yaffs_SkipFullVerification' defined but not used

Testing shows no changes of the image sizes.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-10 00:00:29 +02:00
Wolfgang Denk
fa00e0324c YAFFS2: fs/yaffs2/yaffs_nand.[hc] - fix build warnings
Fix these:
yaffs_guts.c: In function 'yaffs_Scan':
yaffs_guts.c:5436: warning: pointer targets in passing argument 4 of 'yaffs_QueryInitialBlockState' differ in signedness
yaffs_guts.c: In function 'yaffs_ScanBackwards':
yaffs_guts.c:6017: warning: pointer targets in passing argument 4 of 'yaffs_QueryInitialBlockState' differ in signedness
yaffs_nand.c: In function 'yaffs_QueryInitialBlockState':
yaffs_nand.c:109: warning: pointer targets in passing argument 4 of 'dev->queryNANDBlock' differ in signedness
yaffs_nand.c:113: warning: pointer targets in passing argument 4 of 'yaffs_TagsCompatabilityQueryNANDBlock' differ in signedness

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-10 00:00:25 +02:00
Wolfgang Denk
9d0265e9bb YAFFS2: fs/yaffs2/Makefile - fix build warnings
Drop the "-DNO_Y_INLINE" setting to fix these:
yaffs_guts.h:806: warning: 'yaffs_GetBlockInfo' defined but not used

Impact on image size is negligible - for the VCMA9 board the text
segment size grew from 496353 to 496357 bytes (i. e. 0.0008%);
total image size even remained constant.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-10 00:00:22 +02:00
Wolfgang Denk
6ac360c465 YAFFS2: fs/yaffs2/yaffscfg.c - fix build warnings
Fix these:
yaffscfg.c: In function 'cmd_yaffs_mread_file':
yaffscfg.c:316: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'char *'
yaffscfg.c: In function 'cmd_yaffs_ls': yaffscfg.c:371: warning: format '%7d' expects type 'int', but argument 3 has type 'off_t'

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-10 00:00:18 +02:00
Wolfgang Denk
3267bc1b2b ubifs: Fix bad free() sequence in ubifs_finddir()
Free private_data member element before freeing file structure.
This was causing malloc to crash. Also remove unnecessary variable
assigments as file structure gets free'd as well.

Signed-off-by: Rod Boyce <uboot@teamboyce.co.uk>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2011-08-19 17:21:02 +02:00
Albert ARIBAUD
fa82f871c8 Convert ISO-8859 files to UTF-8
There was a mix of UTF-8 and ISO-8859 files in the U-Boot source
tree, which could cause issues with the patchwork review system.
This commit converts all ISO-8859 files to UTF-8.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2011-08-04 23:34:02 +02:00
Anton Staaf
d961c188b2 ext2: Simplify partial sector access logic
Previously reading or writing zero full sectors (reading the end of
one sector and the beginning of the next for example) was special
cased and involved stack allocating a second sector buffer.  This
change uses the same code path for this case as well as when there
are a non-zero number of full sectors to access.  The result is
easier to read and reduces the maximum stack used.

Signed-off-by: Anton Staaf <robotboy@chromium.org>
Cc: Andy Fleming <afleming@freescale.com>
Acked-by: Detlev Zundel <dzu@denx.de>
2011-07-28 15:36:32 +02:00
Anton Staaf
9bac35f57b ext2: Fix checkpatch violations
Fix all checkpatch violations in the low level Ext2 block
device reading code.  This is done in preparation for cleaning
up the partial sector access code.

Signed-off-by: Anton Staaf <robotboy@chromium.org>
Cc: Andy Fleming <afleming@freescale.com>
Acked-by: Detlev Zundel <dzu@denx.de>
2011-07-28 15:36:10 +02:00
Aneesh V
05bad4aa56 scaled down version of generic libraries for SPL
Signed-off-by: Aneesh V <aneesh@ti.com>
2011-07-26 14:44:25 +02:00
Heiko Schocher
62a813bcac cramfs: make cramfs usable without a NOR flash
cc: Wolfgang Denk <wd@denx.de>
cc: Detlev Zundel <dzu@denx.de>
cc: Valentin Longchamp <valentin.longchamp@keymile.com>
cc: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
2011-05-10 22:47:32 +02:00
Loïc Minier
6052cbab40 Fix misc spelling errors found by lintian
Signed-off-by: Loc Minier <loic.minier@linaro.org>
2011-04-12 22:58:31 +02:00
Erik Hansen
3f270f42d7 fat32 root directory handling
Fat directory handling didn't check reaching the end of the root directory. It
relied on a stop condition based on a directory entry with a name starting with
a '\0' character. This check in itself is wrong ('\0' indicates free entry, not
end_of_directory) but outside the scope of this fix. For FAT32, the end of the
rootdir is reached when the end of the cluster chain is reached. The code didn't
check this condition and started to read an incorrect cluster. This caused a
subsequent read request of a sector outside the range of the usb stick in
use. On its turn, the usb stick protested with a stall handshake.

Both FAT32 and non-FAT32 (FAT16/FAT12) end or rootdir checks have been put in.

Signed-off-by: Erik Hansen <erik@makarta.com>
2011-04-02 09:38:24 +02:00
Dirk Behme
c7b7d4550d UBIFS: Fix dereferencing type-punned pointer compiler warning
Fix compiler warning

In file included from ubifs.h:2137:0,
                 from ubifs.c:26:
misc.h: In function 'ubifs_idx_key':
misc.h:263:26: warning: dereferencing type-punned pointer will break strict-aliasing rules

seen with gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50).

No functional change.

CC: Stefan Roese <sr@denx.de>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2011-01-11 11:09:36 +01:00
Wolfgang Denk
006915fbb0 Merge branch 'master' of ../master into next 2010-12-16 23:00:53 +01:00
Ricardo Ribalda Delgado
64b6817848 ubifs.c: BUG: Error following links
The link_name variable is declared inside the if block and it is used
outside it through the name pointer.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2010-12-03 18:24:04 +01:00
Stefan Roese
b1a14f8a1c UBIFS: Change ubifsload to not read beyond the requested size
Until now ubifsload pads the destination with 0 up to a multiple of
UBIFS_BLOCK_SIZE (4KiB) while reading a file to memory. This patch
changes this behaviour to only read to the requested length. This
is either the file length or the length/size provided as parameter
to the ubifsload command.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-12-03 16:33:47 +01:00
Stefan Roese
cb9c09d487 UBIFS: Add ubifsumount command to unmount an active volume
This new ubifsumount command allows the user to unmount a previously
mounted UBIFS volume.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-12-03 16:32:09 +01:00
Mike Frysinger
c87f6457bb ext2: constify file/dir names
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-11-28 21:58:51 +01:00
Sebastien Carlier
6d8962e814 Switch from archive libraries to partial linking
Before this commit, weak symbols were not overridden by non-weak symbols
found in archive libraries when linking with recent versions of
binutils.  As stated in the System V ABI, "the link editor does not
extract archive members to resolve undefined weak symbols".

This commit changes all Makefiles to use partial linking (ld -r) instead
of creating library archives, which forces all symbols to participate in
linking, allowing non-weak symbols to override weak symbols as intended.
This approach is also used by Linux, from which the gmake function
cmd_link_o_target (defined in config.mk and used in all Makefiles) is
inspired.

The name of each former library archive is preserved except for
extensions which change from ".a" to ".o".  This commit updates
references accordingly where needed, in particular in some linker
scripts.

This commit reveals board configurations that exclude some features but
include source files that depend these disabled features in the build,
resulting in undefined symbols.  Known such cases include:
- disabling CMD_NET but not CMD_NFS;
- enabling CONFIG_OF_LIBFDT but not CONFIG_QE.

Signed-off-by: Sebastien Carlier <sebastien.carlier@gmail.com>
2010-11-17 21:02:18 +01:00
Wolfgang Denk
2e5167ccad Replace CONFIG_RELOC_FIXUP_WORKS by CONFIG_NEEDS_MANUAL_RELOC
By now, the majority of architectures have working relocation
support, so the few remaining architectures have become exceptions.
To make this more obvious, we make working relocation now the default
case, and flag the remaining cases with CONFIG_NEEDS_MANUAL_RELOC.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>
Tested-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2010-10-29 21:32:07 +02:00
Stefano Babic
11c8dd36ed FAT: buffer overflow with FAT12/16
Last commit 3831530dcb7b71329c272ccd6181f8038b6a6dd0a was intended
"explicitly specify FAT12/16 root directory parsing buffer size, instead
of relying on cluster size". Howver, the underlying function requires
the size of the buffer in blocks, not in bytes, and instead of passing
a double sector size a request for 1024 blocks is sent. This generates
a buffer overflow with overwriting of other structure (in the case seen,
USB structures were overwritten).

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Mikhail Zolotaryov <lebon@lebon.org.ua>
2010-10-20 09:14:38 +02:00
Mikhail Zolotaryov
3831530dcb VFAT: fix processing of scattered long file name entries
The U-Boot code has the following bugs related to the processing of Long File
Name (LFN) entries scattered across several clusters/sectors :

1) get_vfatname() function is designed to gather scattered LFN entries by
cluster chain processing - that doesn't work for FAT12/16 root directory.
In other words, the function expects the following input data:
 1.1) FAT32 directory (which is cluster chain based);
        OR
 1.2) FAT12/16 non-root directory (which is also cluster chain based);
        OR
 1.3) FAT12/16 root directory (allocated as contiguous sectors area), but
 all necessary information MUST be within the input buffer of filesystem cluster
 size (thus cluster-chain jump is never initiated).

In order to accomplish the last condition, root directory parsing code in
do_fat_read() uses the following trick: read-out cluster-size block, process
only first sector (512 bytes), then shift 512 forward, read-out cluster-size
block and so on. This works great unless cluster size is equal to 512 bytes
(in a case you have a small partition), or long file name entries are scattered
across three sectors, see 4) for details.

2) Despite of the fact that get_vfatname() supports FAT32 root directory
browsing, do_fat_read() function doesn't send current cluster number correctly,
so root directory look-up doesn't work correctly.

3) get_vfatname() doesn't gather scattered entries correctly also is the case
when all LFN entries are located at the end of the source cluster, but real
directory entry (which must be returned) is at the only beginning of the
next one. No error detected, the resulting directory entry returned contains
a semi-random information (wrong size, wrong start cluster number and so on)
i.e. the entry is not accessible.

4) LFN (VFAT) allows up to 20 entries (slots) each containing 26 bytes (13
UTF-16 code units) to represent a single long file name i.e. up to 520 bytes.
U-Boot allocates 256 bytes buffer instead, i.e. 10 or more LFN slots record
may cause buffer overflow / memory corruption.
Also, it's worth to mention that 20+1 slots occupy 672 bytes space which may
take more than one cluster of 512 bytes (medium-size FAT32 or small FAT16
partition) - get_vfatname() function doesn't support such case as well.

The patch attached fixes these problems in the following way:
- keep using 256 bytes buffer for a long file name, but safely prevent a
possible buffer overflow (skip LFN processing, if it contains 10 or more
slots).

- explicitly specify FAT12/16 root directory parsing buffer size, instead
of relying on cluster size. The value used is a double sector size (to store
current sector and the next one). This fixes the first problem and increases
performance on big FAT12/16 partitions;

- send current cluster number (FAT32) to get_vfatname() during root
directory processing;

- use LFN counter to seek the real directory entry in get_vfatname() - fixes the
third problem;

- skip deleted entries in the root directory (to prevent bogus buffer
overflow detection and LFN counter steps).

Note: it's not advised to split up the patch, because a separate part may
operate incorrectly.

Signed-off-by: Mikhail Zolotaryov <lebon@lebon.org.ua>
2010-10-12 22:39:14 +02:00
Aaron Pace
a2740dd00d ext2fs: Fix optimization bug for doubly-indirect block pointers
Doubly-indirect block numbers are compared against the first-level
indirect block when checking for a cached copy.  This is causing the
doubly-indirect block to be re-read each time it is accessed.
Repairing this reduces load time for a 70M file from 72 seconds
to 38 seconds.

Signed-off-by: Aaron Pace <Aaron.Pace@alcatel-lucent.com>
2010-08-07 22:44:08 +02:00
Wolfgang Denk
7385c28e9b fs/fat: Big code cleanup.
- reformat
- throw out macros like FAT_DPRINT and FAT_DPRINT
- remove dead code

Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-07-24 20:54:46 +02:00
Wolfgang Denk
2aa98c6612 FAT32: fix broken root directory handling.
On FAT32, instead of fetching the cluster numbers from the FAT, the
code assumed (incorrectly) that the clusters for the root directory
were allocated contiguously. In the result, only the first cluster
could be accessed. At the typical cluster size of 8 sectors this
caused all accesses to files after the first 128 entries to fail -
"fatls" would terminate after 128 files (usually displaying a bogus
file name, occasionally even crashing the system), and "fatload"
would fail to find any files that were not in the first directory
cluster.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-07-24 20:53:50 +02:00
Wolfgang Denk
66c2d73cfc FAT32: fix support for superfloppy-format (PBR)
"Superfloppy" format (in U-Boot called PBR) did not work for FAT32 as
the file system type string is at a different location. Add support
for FAT32.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-07-24 20:53:43 +02:00
Thomas Chou
1117cbf2ad nios: remove nios-32 arch
The nios-32 arch is obsolete and broken. So it is removed.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2010-05-28 10:56:04 -04:00
Stefano Babic
6865168359 ubifsmount fails due to not initialized list
ubifsmount is not working and causes an access with
a pointer set to zero because the ubifs_fs_type
is not initialized correctly.

Signed-off-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2010-04-28 10:00:13 +02:00
Heiko Schocher
2d2018f3db jffs2, suen3: Fix compiler warning
$ ./MAKEALL suen3
jffs2_1pass.c: In function 'get_fl_mem':
jffs2_1pass.c:399: warning: unused variable 'id'
jffs2_1pass.c: In function 'get_node_mem':
jffs2_1pass.c:423: warning: unused variable 'id'

Signed-off-by: Heiko Schocher <hs@denx.de>
Tested-by: Tom <Tom.Rix@windriver.com>
2010-03-31 15:13:31 +02:00
Wolfgang Denk
f098337152 JFFS2: drop support for LZARI compression mode
Support for LZARI compression mode was added based on a MTD CVS
snapshot of March 13, 2005. However, fs/jffs2/compr_lzari.c contains
contradictory licensing terms: the original copyright clause says "All
rights reserved. Permission granted for non-commercial use.", but
later reference to the file 'LICENCE' in the jffs2 directory was added
which says GPL v2 or later.

As no boards ever used LZARI compression, and this file is also not
present in recent MTD code, we resolve this conflict by removing the
conflicting file and references to it.

Also copy the referenced but missing file 'LICENCE' from the current
MTD source tree.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-01-15 11:16:47 +01:00
Wolfgang Wegner
87d93a1ba2 move prototypes for gunzip() and zunzip() to common.h
Prototype for gunzip/zunzip was only in lib_generic/gunzip.c and thus
repeated in every file using it. This patch moves the prototypes to
common.h and removes all prototypes distributed anywhere else.

Signed-off-by: Wolfgang Wegner <w.wegner@astro-kom.de>
2009-12-21 21:39:59 +01:00
Heiko Schocher
4b142febff common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
There is more and more usage of printing 64bit values,
so enable this feature generally, and delete the
CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
defines.

Signed-off-by: Heiko Schocher <hs@denx.de>
2009-12-08 22:14:07 +01:00
Michael Brandt
270737acca EXT2FS: fix inode size for ext2fs rev#0
extfs.c assumes that there is always a valid inode_size field in the
superblock. But this is not true for ext2fs rev 0. Such ext2fs images
are for instance generated by genext2fs. Symptoms on ARM machines are
messages like: "raise: Signal # 8 caught"; on PowerPC "ext2ls" will
print nothing.
This fix checks for rev 0 and uses then 128 bytes as inode size.

Signed-off-by: Michael Brandt <Michael.Brandt@emsyso.de>
Tested on: TQM5200S
Tested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-12-05 00:46:10 +01:00
Peter Tyser
521af04d85 Conditionally perform common relocation fixups
Add #ifdefs where necessary to not perform relocation fixups.  This
allows boards/architectures which support relocation to trim a decent
chunk of code.

Note that this patch doesn't add #ifdefs to architecture-specific code
which does not support relocation.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-10-03 10:17:57 +02:00
Simon Kagstrom
ef37c6835e ubifs: Correct dereferencing of files-after-symlinks
Files in directories which are symlinked to were not dereferenced
correctly in last commit. E.g., with a symlink

   /boot/lnk -> /boot/real_dir

loading

   /boot/lnk/uImage

will fail. This patch fixes that by simply seeing to it that the target
base directory has a slash after it.

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-09-28 16:58:31 +02:00
Simon Kagstrom
9d7952e4c6 ubifs: Add support for looking up directory and relative symlinks
This patch adds support for resolving symlinks to directories as well as
relative symlinks. Symlinks are now always resolved during file lookup,
so the load stage no longer needs to special-case them.

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-09-23 15:58:05 +02:00
Simon Kagstrom
02f99901ed Move __set/clear_bit from ubifs.h to bitops.h
__set_bit and __clear_bit are defined in ubifs.h as well as in
asm/include/bitops.h for some architectures. This patch moves
the generic implementation to include/linux/bitops.h and uses
that unless it's defined by the architecture.

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
2009-09-15 22:31:24 +02:00
Ilya Yanok
8cf19b9fec jffs2: some fixes to summary support
This patch fixes some issues with JFFS2 summary support in U-Boot.
1/ Summary support made compilation configurable (as summary support
considered expiremental even in Linux).
2/ Summary code can do unaligned 16-bit and 32-bit memory accesses.
We need to get data byte by byte to exclude data aborts.
3/ Make summary scan in two passes so we can safely fall back to full
scan if we found unsupported entry in the summary.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2009-08-21 23:29:35 +02:00
Ilya Yanok
b644006e1a jffs2: clean the cache in case of malloc fails in build_lists
We should call jffs2_clean_cache() if we return from jffs2_build_lists()
with an error to prevent usage of incomplete lists. Also we should
free() a local buffer to prevent memory leaks.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2009-08-18 21:30:58 +02:00
Weirich, Bernhard
56fdaadc12 ext2: fix inode size and calculations
Signed-off-by: unsik Kim <donari75@gmail.com>
Signed-off-by: Bernhard Weirich <bernhard.weirich@riedel.net>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Tested-by: Wolfgang Denk <wd@denx.de>
2009-07-28 22:38:17 +02:00
Scott Wood
be33b046b5 Remove legacy NAND and disk on chip code.
Legacy NAND had been scheduled for removal.  Any boards that use this
were already not building in the previous release due to an #error.

The disk on chip code in common/cmd_doc.c relies on legacy NAND,
and it has also been removed.  There is newer disk on chip code
in drivers/mtd/nand; someone with access to hardware and sufficient
time and motivation can try to get that working, but for now disk
on chip is not supported.

Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-07-16 19:07:47 -05:00
Tom Rix
651351fe98 FAT replace compare_sign with strncmp.
The static function compare_sign is only used to compare the fs_type string
and does not do anything more than what strncmp does.

The addition of the trailing '\0' to fs_type, while legal, is not needed
because the it is never printed out and strncmp does not depend on NULL
terminated strings.

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-06-12 20:45:48 +02:00
Daniel Mack
165f9859b6 ubifs: fix small error path mismatch
In do_readpage(), don't free 'dn' if its allocation failed.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
2009-06-09 23:11:53 +02:00
Ricardo Ribalda Delgado
c1a0fd5f28 ubifs: BUG: Blocks commpressed with zlib
Blocks compressed with zlib dont have the full gzip header.

Without this patch, block compressed with zlib cannot be readed!

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
2009-04-30 23:07:04 +02:00
Ricardo Ribalda Delgado
dbd3361440 ubifs: BUG realpath string must be ended with NULL
If the memory used to copy the link_make is "dirty" the string wont
be ended with NULL, throwing out multiple memory bugs.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Acked-by: Stefan Roese <sr@denx.de>
2009-04-28 01:21:36 +02:00
Stefan Roese
7d3d30b1b3 UBIFS: Remove tnc_commit.c which is not used in the read-only version
I missed removing this file while implementing the UBIFS support. It's
not referenced at all, so let's remove it. Thanks to Artem Bityutskiy
for spotting.

Signed-off-by: Stefan Roese <sr@denx.de>
2009-04-28 00:36:53 +02:00
Adrian Hunter
6356daff70 UBIFS: fix recovery bug
UBIFS did not recovery in a situation in which it could
have. The relevant function assumed there could not be
more nodes in an eraseblock after a corrupted node, but
in fact the last (NAND) page written might contain anything.
The correct approach is to check for empty space (0xFF bytes)
from then on.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-04-28 00:36:21 +02:00
Wolfgang Denk
c0a14aedc3 Update CHANGELOG, coding style cleanup. 2009-04-05 00:27:57 +02:00
Artem Bityutskiy
febd7e4174 UBIFS: add R/O compatibility
Now UBIFS is supported by u-boot. If we ever decide to change the
media format, then people will have to upgrade their u-boots to
mount new format images. However, very often it is possible to
preserve R/O forward-compatibility, even though the write
forward-compatibility is not preserved.

This patch introduces a new super-block field which stores the
R/O compatibility version.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Acked-by: Adrian Hunter <Adrian.Hunter@nokia.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-04-04 22:44:22 +02:00
Jean-Christophe PLAGNIOL-VILLARD
a31e091ad7 rename include/zlib.h to include/u-boot/zlib.h
Some systems have zlib.h installed in /usr/include/. This isn't the
desired file for u-boot code - we want the one in include/zlib.h.
This rename will avoid the conflict.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-04-04 15:37:54 +02:00
unsik Kim
75eb82ec7c mflash: Initial mflash support
Mflash is fusion memory device mainly targeted consumer eletronic and
mobile phone.
Internally, it have nand flash and other hardware logics and supports
some different operation (ATA, IO, XIP) modes.

IO mode is custom mode for the host that doesn't have IDE interface.
(Many mobile targeted SoC doesn't have IDE bus)

This driver support mflash IO mode.

Followings are brief descriptions about IO mode.

1. IO mode based on ATA protocol and uses some custom command. (read
   confirm, write confirm)
2. IO mode uses SRAM bus interface.

Signed-off-by: unsik Kim <donari75@gmail.com>
2009-04-03 23:47:06 +02:00
Michael Lawnick
faac4fd852 UBIFS: Missing offset relocation for compressor 'none'
On systems where U-Boot is linked to another address than it really lays
(e.g. backup image), calls via function pointers must be fixed with a
'+= gd->reloc_off'.
This was not done for none_compr in ubifs_compressors_init() what leads
to system crash on ubifsmount command.

Signed-off-by: Michael Lawnick <ml.lawnick@gmx.de>
Acked-by: Stefan Roese <sr@denx.de>
2009-03-20 22:39:15 +01:00
Stefan Roese
9eefe2a2b3 UBIFS: Implement read-only UBIFS support in U-Boot
The U-Boot UBIFS implementation is largely a direct copy from the current
Linux version (2.6.29-rc6). As already done in the UBI version we have an
"abstraction layer" to redefine or remove some OS calls (e.g. mutex_lock()
...). This makes it possible to use the original Linux code with very
little changes. And by this we can better update to later Linux versions.

I removed some of the Linux features that are not used in the U-Boot
version (e.g. garbage-collection, write support).

Signed-off-by: Stefan Roese <sr@denx.de>
CC: Artem Bityutskiy <dedekind@infradead.org>
CC: Adrian Hunter <ext-Adrian.Hunter@nokia.com>
2009-03-20 22:39:15 +01:00
Wolfgang Denk
65f7d41031 fat.c: fix warning: array subscript is above array bounds
Fix based on suggestion by David Hawkins <dwh@ovro.caltech.edu>.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-01-27 21:36:28 +01:00
Bryan Wu
7e4b9b4f6f fat: fix unaligned errors
A couple of buffers in the fat code are declared as an array of bytes.
But it is then cast up to a structure with 16bit and 32bit members.
Since GCC assumes structure alignment here, we have to force the
buffers to be aligned according to the structure usage.

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-01-24 02:03:39 +01:00
Ilya Yanok
584eedab66 jffs2: include <linux/mtd/compat.h> instead of defining own min_t
Include <linux/mtd/compat.h> header for min_t definition instead of
providing our own one. Removes warnings in case of OneNAND support
enabled.

Although I thinks it's a bit silly to include <linux/mtd/compat.h>
just for min_t...

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Acked-by: Stefan Roese <sr@denx.de>
2008-12-16 17:14:54 +01:00
Sonic Zhang
8c5170a7d0 fs/fat: handle FAT on SATA
The FAT file system driver should also handle FAT on SATA devices.

Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-12-10 09:21:48 +01:00
Ilya Yanok
142a80ffc3 jffs2: cache data_crc results
As we moved data_crc() invocation from jffs2_1pass_build_lists() to
jffs2_1pass_read_inode() data_crc is going to be calculated on each
inode access. This patch adds caching of data_crc() results. There
is no significant improvement in speed (because of flash access
caching added in previous patch I think, crc in RAM is really fast)
but this patch impacts memory usage -- every b_node structure uses
12 bytes instead of 8.

Signed-off-by: Alexey Neyman <avn@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2008-12-09 23:40:01 +01:00
Ilya Yanok
9b7076229e jffs2: summary support
This patch adds support for reading fs information from summary
node instead of scanning full eraseblock.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2008-12-09 23:39:59 +01:00