Consolidate bool type

'bool' is defined in random places. This patch consolidates them into a
single header file include/linux/types.h, using stdbool.h introduced in C99.

All other #define, typedef and enum are removed. They are all consistent with
true = 1, false = 0.

Replace FALSE, False with false. Replace TRUE, True with true.
Skip *.py, *.php, lib/* files.

Signed-off-by: York Sun <yorksun@freescale.com>
This commit is contained in:
York Sun 2013-04-01 11:29:11 -07:00 committed by Tom Rini
parent 5644369450
commit 472d546054
135 changed files with 942 additions and 1137 deletions

12
README
View File

@ -1938,15 +1938,15 @@ CBFS (Coreboot Filesystem) support
I2C_READ
Code that returns TRUE if the I2C data line is high,
FALSE if it is low.
Code that returns true if the I2C data line is high,
false if it is low.
eg: #define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
I2C_SDA(bit)
If <bit> is TRUE, sets the I2C data line high. If it
is FALSE, it clears it (low).
If <bit> is true, sets the I2C data line high. If it
is false, it clears it (low).
eg: #define I2C_SDA(bit) \
if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \
@ -1954,8 +1954,8 @@ CBFS (Coreboot Filesystem) support
I2C_SCL(bit)
If <bit> is TRUE, sets the I2C clock line high. If it
is FALSE, it clears it (low).
If <bit> is true, sets the I2C clock line high. If it
is false, it clears it (low).
eg: #define I2C_SCL(bit) \
if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \

View File

@ -28,9 +28,6 @@
#include <asm/arch/spr_misc.h>
#include <asm/arch/spr_defs.h>
#define FALSE 0
#define TRUE (!FALSE)
static void sel_1v8(void)
{
struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
@ -133,8 +130,8 @@ void soc_init(void)
/*
* xxx_boot_selected:
*
* return TRUE if the particular booting option is selected
* return FALSE otherwise
* return true if the particular booting option is selected
* return false otherwise
*/
static u32 read_bootstrap(void)
{
@ -150,18 +147,18 @@ int snor_boot_selected(void)
/* Check whether SNOR boot is selected */
if ((bootstrap & CONFIG_SPEAR_ONLYSNORBOOT) ==
CONFIG_SPEAR_ONLYSNORBOOT)
return TRUE;
return true;
if ((bootstrap & CONFIG_SPEAR_NORNANDBOOT) ==
CONFIG_SPEAR_NORNAND8BOOT)
return TRUE;
return true;
if ((bootstrap & CONFIG_SPEAR_NORNANDBOOT) ==
CONFIG_SPEAR_NORNAND16BOOT)
return TRUE;
return true;
}
return FALSE;
return false;
}
int nand_boot_selected(void)
@ -172,20 +169,20 @@ int nand_boot_selected(void)
/* Check whether NAND boot is selected */
if ((bootstrap & CONFIG_SPEAR_NORNANDBOOT) ==
CONFIG_SPEAR_NORNAND8BOOT)
return TRUE;
return true;
if ((bootstrap & CONFIG_SPEAR_NORNANDBOOT) ==
CONFIG_SPEAR_NORNAND16BOOT)
return TRUE;
return true;
}
return FALSE;
return false;
}
int pnor_boot_selected(void)
{
/* Parallel NOR boot is not selected in any SPEAr600 revision */
return FALSE;
return false;
}
int usb_boot_selected(void)
@ -195,39 +192,39 @@ int usb_boot_selected(void)
if (USB_BOOT_SUPPORTED) {
/* Check whether USB boot is selected */
if (!(bootstrap & CONFIG_SPEAR_USBBOOT))
return TRUE;
return true;
}
return FALSE;
return false;
}
int tftp_boot_selected(void)
{
/* TFTP boot is not selected in any SPEAr600 revision */
return FALSE;
return false;
}
int uart_boot_selected(void)
{
/* UART boot is not selected in any SPEAr600 revision */
return FALSE;
return false;
}
int spi_boot_selected(void)
{
/* SPI boot is not selected in any SPEAr600 revision */
return FALSE;
return false;
}
int i2c_boot_selected(void)
{
/* I2C boot is not selected in any SPEAr600 revision */
return FALSE;
return false;
}
int mmc_boot_selected(void)
{
return FALSE;
return false;
}
void plat_late_init(void)

View File

@ -120,7 +120,7 @@ u32 spl_boot(void)
/*
* All the supported booting devices are listed here. Each of
* the booting type supported by the platform would define the
* macro xxx_BOOT_SUPPORTED to TRUE.
* macro xxx_BOOT_SUPPORTED to true.
*/
if (SNOR_BOOT_SUPPORTED && snor_boot_selected()) {

View File

@ -61,9 +61,6 @@ typedef unsigned int __kernel_gid32_t;
typedef unsigned short __kernel_old_uid_t;
typedef unsigned short __kernel_old_gid_t;
#define BOOL_WAS_DEFINED
typedef enum { false = 0, true = 1 } bool;
#ifdef __GNUC__
typedef long long __kernel_loff_t;
#endif

View File

@ -96,7 +96,7 @@ int disable_interrupts (void)
sr = get_sr ();
set_sr (sr | 0x0700);
return ((sr & 0x0700) == 0); /* return TRUE, if interrupts were enabled before */
return ((sr & 0x0700) == 0); /* return true, if interrupts were enabled before */
}
void int_handler (struct pt_regs *fp)

View File

@ -59,7 +59,7 @@ void enable_interrupts(void)
/*
* disable interrupts
* Return TRUE if GIE is enabled before we disable it.
* Return true if GIE is enabled before we disable it.
*/
int disable_interrupts(void)
{

View File

@ -513,7 +513,7 @@ void fsl_serdes_init(void)
size_t arglen;
#endif
#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES_A001
int need_serdes_a001; /* TRUE == need work-around for SERDES A001 */
int need_serdes_a001; /* true == need work-around for SERDES A001 */
#endif
#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
char buffer[HWCONFIG_BUFFER_SIZE];

View File

@ -88,8 +88,6 @@ void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang"))
#define NUMMEMTESTS 8
#define NUMMEMWORDS 8
#define MAXBXCR 4
#define TRUE 1
#define FALSE 0
/*
* This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
@ -298,7 +296,7 @@ static void get_spd_info(unsigned long *dimm_populated,
unsigned char num_of_bytes;
unsigned char total_size;
dimm_found = FALSE;
dimm_found = false;
for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
num_of_bytes = 0;
total_size = 0;
@ -307,16 +305,16 @@ static void get_spd_info(unsigned long *dimm_populated,
total_size = spd_read(iic0_dimm_addr[dimm_num], 1);
if ((num_of_bytes != 0) && (total_size != 0)) {
dimm_populated[dimm_num] = TRUE;
dimm_found = TRUE;
dimm_populated[dimm_num] = true;
dimm_found = true;
debug("DIMM slot %lu: populated\n", dimm_num);
} else {
dimm_populated[dimm_num] = FALSE;
dimm_populated[dimm_num] = false;
debug("DIMM slot %lu: Not populated\n", dimm_num);
}
}
if (dimm_found == FALSE) {
if (dimm_found == false) {
printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
spd_ddr_init_hang ();
}
@ -330,7 +328,7 @@ static void check_mem_type(unsigned long *dimm_populated,
unsigned char dimm_type;
for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
if (dimm_populated[dimm_num] == TRUE) {
if (dimm_populated[dimm_num] == true) {
dimm_type = spd_read(iic0_dimm_addr[dimm_num], 2);
switch (dimm_type) {
case 7:
@ -356,7 +354,7 @@ static void check_volt_type(unsigned long *dimm_populated,
unsigned long voltage_type;
for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
if (dimm_populated[dimm_num] == TRUE) {
if (dimm_populated[dimm_num] == true) {
voltage_type = spd_read(iic0_dimm_addr[dimm_num], 8);
if (voltage_type != 0x04) {
printf("ERROR: DIMM %lu with unsupported voltage level.\n",
@ -398,12 +396,12 @@ static void program_cfg0(unsigned long *dimm_populated,
/*
* FIXME: assume the DDR SDRAMs in both banks are the same
*/
ecc_enabled = TRUE;
ecc_enabled = true;
for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
if (dimm_populated[dimm_num] == TRUE) {
if (dimm_populated[dimm_num] == true) {
ecc = spd_read(iic0_dimm_addr[dimm_num], 11);
if (ecc != 0x02) {
ecc_enabled = FALSE;
ecc_enabled = false;
}
/*
@ -437,7 +435,7 @@ static void program_cfg0(unsigned long *dimm_populated,
/*
* program Memory Data Error Checking
*/
if (ecc_enabled == TRUE) {
if (ecc_enabled == true) {
cfg0 |= SDRAM_CFG0_MCHK_GEN;
} else {
cfg0 |= SDRAM_CFG0_MCHK_NON;
@ -493,7 +491,7 @@ static void program_rtr(unsigned long *dimm_populated,
bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
if (dimm_populated[dimm_num] == TRUE) {
if (dimm_populated[dimm_num] == true) {
refresh_rate_type = 0x7F & spd_read(iic0_dimm_addr[dimm_num], 12);
switch (refresh_rate_type) {
case 0x00:
@ -585,15 +583,15 @@ static void program_tr0(unsigned long *dimm_populated,
t_rp_ns = 0;
t_rcd_ns = 0;
t_ras_ns = 0;
cas_2_0_available = TRUE;
cas_2_5_available = TRUE;
cas_3_0_available = TRUE;
cas_2_0_available = true;
cas_2_5_available = true;
cas_3_0_available = true;
tcyc_2_0_ns_x_10 = 0;
tcyc_2_5_ns_x_10 = 0;
tcyc_3_0_ns_x_10 = 0;
for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
if (dimm_populated[dimm_num] == TRUE) {
if (dimm_populated[dimm_num] == true) {
wcsbc = spd_read(iic0_dimm_addr[dimm_num], 15);
t_rp_ns = spd_read(iic0_dimm_addr[dimm_num], 27) >> 2;
t_rcd_ns = spd_read(iic0_dimm_addr[dimm_num], 29) >> 2;
@ -640,7 +638,7 @@ static void program_tr0(unsigned long *dimm_populated,
if (cas_index != 0) {
cas_index++;
}
cas_3_0_available = FALSE;
cas_3_0_available = false;
}
if (((cas_bit & 0x08) != 0) || (cas_index < 3)) {
@ -650,7 +648,7 @@ static void program_tr0(unsigned long *dimm_populated,
if (cas_index != 0) {
cas_index++;
}
cas_2_5_available = FALSE;
cas_2_5_available = false;
}
if (((cas_bit & 0x04) != 0) || (cas_index < 3)) {
@ -660,7 +658,7 @@ static void program_tr0(unsigned long *dimm_populated,
if (cas_index != 0) {
cas_index++;
}
cas_2_0_available = FALSE;
cas_2_0_available = false;
}
break;
@ -683,13 +681,13 @@ static void program_tr0(unsigned long *dimm_populated,
/*
* Program SD_CASL field
*/
if ((cas_2_0_available == TRUE) &&
if ((cas_2_0_available == true) &&
(bus_period_x_10 >= tcyc_2_0_ns_x_10)) {
tr0 |= SDRAM_TR0_SDCL_2_0_CLK;
} else if ((cas_2_5_available == TRUE) &&
} else if ((cas_2_5_available == true) &&
(bus_period_x_10 >= tcyc_2_5_ns_x_10)) {
tr0 |= SDRAM_TR0_SDCL_2_5_CLK;
} else if ((cas_3_0_available == TRUE) &&
} else if ((cas_3_0_available == true) &&
(bus_period_x_10 >= tcyc_3_0_ns_x_10)) {
tr0 |= SDRAM_TR0_SDCL_3_0_CLK;
} else {
@ -950,9 +948,9 @@ static void program_tr1(void)
current_fail_length = 0;
current_start = 0;
rdclt_offset = 0;
window_found = FALSE;
fail_found = FALSE;
pass_found = FALSE;
window_found = false;
fail_found = false;
pass_found = false;
debug("Starting memory test ");
for (k = 0; k < NUMHALFCYCLES; k++) {
@ -963,8 +961,8 @@ static void program_tr1(void)
mtsdram(SDRAM0_TR1, (tr1 | SDRAM_TR1_RDCT_ENCODE(rdclt)));
if (short_mem_test()) {
if (fail_found == TRUE) {
pass_found = TRUE;
if (fail_found == true) {
pass_found = true;
if (current_pass_length == 0) {
current_start = rdclt_offset + rdclt;
}
@ -983,10 +981,10 @@ static void program_tr1(void)
current_fail_length++;
if (current_fail_length >= (dly_val>>2)) {
if (fail_found == FALSE) {
fail_found = TRUE;
} else if (pass_found == TRUE) {
window_found = TRUE;
if (fail_found == false) {
fail_found = true;
} else if (pass_found == true) {
window_found = true;
break;
}
}
@ -994,9 +992,8 @@ static void program_tr1(void)
}
debug(".");
if (window_found == TRUE) {
if (window_found == true)
break;
}
tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK;
rdclt_offset += dly_val;
@ -1006,7 +1003,7 @@ static void program_tr1(void)
/*
* make sure we find the window
*/
if (window_found == FALSE) {
if (window_found == false) {
printf("ERROR: Cannot determine a common read delay.\n");
spd_ddr_init_hang ();
}
@ -1115,7 +1112,7 @@ static unsigned long program_bxcr(unsigned long *dimm_populated,
bank_base_addr = CONFIG_SYS_SDRAM_BASE;
for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
if (dimm_populated[dimm_num] == TRUE) {
if (dimm_populated[dimm_num] == true) {
num_row_addr = spd_read(iic0_dimm_addr[dimm_num], 3);
num_col_addr = spd_read(iic0_dimm_addr[dimm_num], 4);
num_banks = spd_read(iic0_dimm_addr[dimm_num], 5);

View File

@ -241,13 +241,6 @@ void board_add_ram_info(int use_default)
/*-----------------------------------------------------------------------------+
* Defines
*-----------------------------------------------------------------------------*/
#ifndef TRUE
#define TRUE 1
#endif
#ifndef FALSE
#define FALSE 0
#endif
#define SDRAM_DDR1 1
#define SDRAM_DDR2 2
#define SDRAM_NONE 0
@ -683,7 +676,7 @@ static void get_spd_info(unsigned long *dimm_populated,
unsigned char num_of_bytes;
unsigned char total_size;
dimm_found = FALSE;
dimm_found = false;
for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
num_of_bytes = 0;
total_size = 0;
@ -696,16 +689,16 @@ static void get_spd_info(unsigned long *dimm_populated,
iic0_dimm_addr[dimm_num], total_size);
if ((num_of_bytes != 0) && (total_size != 0)) {
dimm_populated[dimm_num] = TRUE;
dimm_found = TRUE;
dimm_populated[dimm_num] = true;
dimm_found = true;
debug("DIMM slot %lu: populated\n", dimm_num);
} else {
dimm_populated[dimm_num] = FALSE;
dimm_populated[dimm_num] = false;
debug("DIMM slot %lu: Not populated\n", dimm_num);
}
}
if (dimm_found == FALSE) {
if (dimm_found == false) {
printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
spd_ddr_init_hang ();
}
@ -724,7 +717,7 @@ static void check_mem_type(unsigned long *dimm_populated,
unsigned long dimm_type;
for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
if (dimm_populated[dimm_num] == TRUE) {
if (dimm_populated[dimm_num] == true) {
dimm_type = spd_read(iic0_dimm_addr[dimm_num], 2);
switch (dimm_type) {
case 1:
@ -994,14 +987,14 @@ static void program_copt1(unsigned long *dimm_populated,
unsigned long val;
#ifdef CONFIG_DDR_ECC
ecc_enabled = TRUE;
ecc_enabled = true;
#else
ecc_enabled = FALSE;
ecc_enabled = false;
#endif
dimm_32bit = FALSE;
dimm_64bit = FALSE;
buf0 = FALSE;
buf1 = FALSE;
dimm_32bit = false;
dimm_64bit = false;
buf0 = false;
buf1 = false;
/*------------------------------------------------------------------
* Set memory controller options reg 1, SDRAM_MCOPT1.
@ -1026,7 +1019,7 @@ static void program_copt1(unsigned long *dimm_populated,
/* test ecc support */
ecc = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 11);
if (ecc != 0x02) /* ecc not supported */
ecc_enabled = FALSE;
ecc_enabled = false;
/* test bank count */
bankcount = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 17);
@ -1048,15 +1041,15 @@ static void program_copt1(unsigned long *dimm_populated,
if (registered == 1) { /* DDR2 always buffered */
/* TODO: what about above comments ? */
mcopt1 |= SDRAM_MCOPT1_RDEN;
buf0 = TRUE;
buf0 = true;
} else {
/* TODO: the mask 0x02 doesn't match Samsung def for byte 21. */
if ((attribute & 0x02) == 0x00) {
/* buffered not supported */
buf0 = FALSE;
buf0 = false;
} else {
mcopt1 |= SDRAM_MCOPT1_RDEN;
buf0 = TRUE;
buf0 = true;
}
}
}
@ -1068,14 +1061,14 @@ static void program_copt1(unsigned long *dimm_populated,
if (registered == 1) {
/* DDR2 always buffered */
mcopt1 |= SDRAM_MCOPT1_RDEN;
buf1 = TRUE;
buf1 = true;
} else {
if ((attribute & 0x02) == 0x00) {
/* buffered not supported */
buf1 = FALSE;
buf1 = false;
} else {
mcopt1 |= SDRAM_MCOPT1_RDEN;
buf1 = TRUE;
buf1 = true;
}
}
}
@ -1087,11 +1080,11 @@ static void program_copt1(unsigned long *dimm_populated,
switch (data_width) {
case 72:
case 64:
dimm_64bit = TRUE;
dimm_64bit = true;
break;
case 40:
case 32:
dimm_32bit = TRUE;
dimm_32bit = true;
break;
default:
printf("WARNING: Detected a DIMM with a data width of %lu bits.\n",
@ -1110,20 +1103,19 @@ static void program_copt1(unsigned long *dimm_populated,
}
}
if ((dimm_64bit == TRUE) && (dimm_32bit == TRUE)) {
if ((dimm_64bit == true) && (dimm_32bit == true)) {
printf("ERROR: Cannot mix 32 bit and 64 bit DDR-SDRAM DIMMs together.\n");
spd_ddr_init_hang ();
}
else if ((dimm_64bit == TRUE) && (dimm_32bit == FALSE)) {
} else if ((dimm_64bit == true) && (dimm_32bit == false)) {
mcopt1 |= SDRAM_MCOPT1_DMWD_64;
} else if ((dimm_64bit == FALSE) && (dimm_32bit == TRUE)) {
} else if ((dimm_64bit == false) && (dimm_32bit == true)) {
mcopt1 |= SDRAM_MCOPT1_DMWD_32;
} else {
printf("ERROR: Please install only 32 or 64 bit DDR-SDRAM DIMMs.\n\n");
spd_ddr_init_hang ();
}
if (ecc_enabled == TRUE)
if (ecc_enabled == true)
mcopt1 |= SDRAM_MCOPT1_MCHK_GEN;
else
mcopt1 |= SDRAM_MCOPT1_MCHK_NON;
@ -1171,14 +1163,14 @@ static void program_codt(unsigned long *dimm_populated,
total_rank += dimm_rank;
total_dimm++;
if ((dimm_num == 0) && (total_dimm == 1))
firstSlot = TRUE;
firstSlot = true;
else
firstSlot = FALSE;
firstSlot = false;
}
}
if (dimm_type == SDRAM_DDR2) {
codt |= SDRAM_CODT_DQS_1_8_V_DDR2;
if ((total_dimm == 1) && (firstSlot == TRUE)) {
if ((total_dimm == 1) && (firstSlot == true)) {
if (total_rank == 1) { /* PUUU */
codt |= CALC_ODT_R(0);
modt0 = CALC_ODT_W(0);
@ -1193,7 +1185,7 @@ static void program_codt(unsigned long *dimm_populated,
modt2 = 0x00000000;
modt3 = 0x00000000;
}
} else if ((total_dimm == 1) && (firstSlot != TRUE)) {
} else if ((total_dimm == 1) && (firstSlot != true)) {
if (total_rank == 1) { /* UUPU */
codt |= CALC_ODT_R(2);
modt0 = 0x00000000;
@ -1467,26 +1459,26 @@ static void program_mode(unsigned long *dimm_populated,
* the dimm modules installed.
*-----------------------------------------------------------------*/
t_wr_ns = 0;
cas_2_0_available = TRUE;
cas_2_5_available = TRUE;
cas_3_0_available = TRUE;
cas_4_0_available = TRUE;
cas_5_0_available = TRUE;
cas_2_0_available = true;
cas_2_5_available = true;
cas_3_0_available = true;
cas_4_0_available = true;
cas_5_0_available = true;
max_2_0_tcyc_ns_x_100 = 10;
max_2_5_tcyc_ns_x_100 = 10;
max_3_0_tcyc_ns_x_100 = 10;
max_4_0_tcyc_ns_x_100 = 10;
max_5_0_tcyc_ns_x_100 = 10;
sdram_ddr1 = TRUE;
sdram_ddr1 = true;
/* loop through all the DIMM slots on the board */
for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
/* If a dimm is installed in a particular slot ... */
if (dimm_populated[dimm_num] != SDRAM_NONE) {
if (dimm_populated[dimm_num] == SDRAM_DDR1)
sdram_ddr1 = TRUE;
sdram_ddr1 = true;
else
sdram_ddr1 = FALSE;
sdram_ddr1 = false;
cas_bit = spd_read(iic0_dimm_addr[dimm_num], 18);
debug("cas_bit[SPD byte 18]=%02lx\n", cas_bit);
@ -1543,7 +1535,7 @@ static void program_mode(unsigned long *dimm_populated,
} else {
if (cas_index != 0)
cas_index++;
cas_4_0_available = FALSE;
cas_4_0_available = false;
}
if (((cas_bit & 0x10) == 0x10) && (cas_index < 3) &&
@ -1554,7 +1546,7 @@ static void program_mode(unsigned long *dimm_populated,
} else {
if (cas_index != 0)
cas_index++;
cas_3_0_available = FALSE;
cas_3_0_available = false;
}
if (((cas_bit & 0x08) == 0x08) && (cas_index < 3) &&
@ -1565,7 +1557,7 @@ static void program_mode(unsigned long *dimm_populated,
} else {
if (cas_index != 0)
cas_index++;
cas_2_5_available = FALSE;
cas_2_5_available = false;
}
if (((cas_bit & 0x04) == 0x04) && (cas_index < 3) &&
@ -1576,7 +1568,7 @@ static void program_mode(unsigned long *dimm_populated,
} else {
if (cas_index != 0)
cas_index++;
cas_2_0_available = FALSE;
cas_2_0_available = false;
}
} else {
/*
@ -1592,7 +1584,7 @@ static void program_mode(unsigned long *dimm_populated,
} else {
if (cas_index != 0)
cas_index++;
cas_5_0_available = FALSE;
cas_5_0_available = false;
}
if (((cas_bit & 0x10) == 0x10) && (cas_index < 3) &&
@ -1603,7 +1595,7 @@ static void program_mode(unsigned long *dimm_populated,
} else {
if (cas_index != 0)
cas_index++;
cas_4_0_available = FALSE;
cas_4_0_available = false;
}
if (((cas_bit & 0x08) == 0x08) && (cas_index < 3) &&
@ -1614,7 +1606,7 @@ static void program_mode(unsigned long *dimm_populated,
} else {
if (cas_index != 0)
cas_index++;
cas_3_0_available = FALSE;
cas_3_0_available = false;
}
}
}
@ -1636,14 +1628,17 @@ static void program_mode(unsigned long *dimm_populated,
debug("cycle_4_0_clk=%lu\n", cycle_4_0_clk);
debug("cycle_5_0_clk=%lu\n", cycle_5_0_clk);
if (sdram_ddr1 == TRUE) { /* DDR1 */
if ((cas_2_0_available == TRUE) && (sdram_freq <= cycle_2_0_clk)) {
if (sdram_ddr1 == true) { /* DDR1 */
if ((cas_2_0_available == true) &&
(sdram_freq <= cycle_2_0_clk)) {
mmode |= SDRAM_MMODE_DCL_DDR1_2_0_CLK;
*selected_cas = DDR_CAS_2;
} else if ((cas_2_5_available == TRUE) && (sdram_freq <= cycle_2_5_clk)) {
} else if ((cas_2_5_available == true) &&
(sdram_freq <= cycle_2_5_clk)) {
mmode |= SDRAM_MMODE_DCL_DDR1_2_5_CLK;
*selected_cas = DDR_CAS_2_5;
} else if ((cas_3_0_available == TRUE) && (sdram_freq <= cycle_3_0_clk)) {
} else if ((cas_3_0_available == true) &&
(sdram_freq <= cycle_3_0_clk)) {
mmode |= SDRAM_MMODE_DCL_DDR1_3_0_CLK;
*selected_cas = DDR_CAS_3;
} else {
@ -1656,13 +1651,16 @@ static void program_mode(unsigned long *dimm_populated,
debug("cas_3_0_available=%d\n", cas_3_0_available);
debug("cas_4_0_available=%d\n", cas_4_0_available);
debug("cas_5_0_available=%d\n", cas_5_0_available);
if ((cas_3_0_available == TRUE) && (sdram_freq <= cycle_3_0_clk)) {
if ((cas_3_0_available == true) &&
(sdram_freq <= cycle_3_0_clk)) {
mmode |= SDRAM_MMODE_DCL_DDR2_3_0_CLK;
*selected_cas = DDR_CAS_3;
} else if ((cas_4_0_available == TRUE) && (sdram_freq <= cycle_4_0_clk)) {
} else if ((cas_4_0_available == true) &&
(sdram_freq <= cycle_4_0_clk)) {
mmode |= SDRAM_MMODE_DCL_DDR2_4_0_CLK;
*selected_cas = DDR_CAS_4;
} else if ((cas_5_0_available == TRUE) && (sdram_freq <= cycle_5_0_clk)) {
} else if ((cas_5_0_available == true) &&
(sdram_freq <= cycle_5_0_clk)) {
mmode |= SDRAM_MMODE_DCL_DDR2_5_0_CLK;
*selected_cas = DDR_CAS_5;
} else {
@ -1677,7 +1675,7 @@ static void program_mode(unsigned long *dimm_populated,
}
}
if (sdram_ddr1 == TRUE)
if (sdram_ddr1 == true)
mmode |= SDRAM_MMODE_WR_DDR1;
else {
@ -1851,16 +1849,16 @@ static void program_tr(unsigned long *dimm_populated,
t_wpc_ns = 0;
t_wtr_ns = 0;
t_rpc_ns = 0;
sdram_ddr1 = TRUE;
sdram_ddr1 = true;
/* loop through all the DIMM slots on the board */
for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
/* If a dimm is installed in a particular slot ... */
if (dimm_populated[dimm_num] != SDRAM_NONE) {
if (dimm_populated[dimm_num] == SDRAM_DDR2)
sdram_ddr1 = TRUE;
sdram_ddr1 = true;
else
sdram_ddr1 = FALSE;
sdram_ddr1 = false;
t_rcd_ns = max(t_rcd_ns, spd_read(iic0_dimm_addr[dimm_num], 29) >> 2);
t_rrd_ns = max(t_rrd_ns, spd_read(iic0_dimm_addr[dimm_num], 28) >> 2);
@ -1925,7 +1923,7 @@ static void program_tr(unsigned long *dimm_populated,
break;
}
if (sdram_ddr1 == TRUE) { /* DDR1 */
if (sdram_ddr1 == true) { /* DDR1 */
if (sdram_freq < 200000000) {
sdtr2 |= SDRAM_SDTR2_WTR_1_CLK;
sdtr2 |= SDRAM_SDTR2_WPC_2_CLK;
@ -2548,8 +2546,8 @@ calibration_loop:
current_pass_length = 0;
current_fail_length = 0;
current_start = 0;
fail_found = FALSE;
pass_found = FALSE;
fail_found = false;
pass_found = false;
/*
* get the delay line calibration register value
@ -2570,8 +2568,8 @@ calibration_loop:
* See if the rffd value passed.
*-----------------------------------------------------------------*/
if (short_mem_test()) {
if (fail_found == TRUE) {
pass_found = TRUE;
if (fail_found == true) {
pass_found = true;
if (current_pass_length == 0)
current_start = rffd;
@ -2589,11 +2587,10 @@ calibration_loop:
current_fail_length++;
if (current_fail_length >= (dly_val >> 2)) {
if (fail_found == FALSE) {
fail_found = TRUE;
} else if (pass_found == TRUE) {
if (fail_found == false)
fail_found = true;
else if (pass_found == true)
break;
}
}
}
} /* for rffd */
@ -2618,9 +2615,9 @@ calibration_loop:
current_pass_length = 0;
current_fail_length = 0;
current_start = 0;
window_found = FALSE;
fail_found = FALSE;
pass_found = FALSE;
window_found = false;
fail_found = false;
pass_found = false;
for (rqfd = 0; rqfd <= SDRAM_RQDC_RQFD_MAX; rqfd++) {
mfsdram(SDRAM_RQDC, rqdc_reg);
@ -2635,8 +2632,8 @@ calibration_loop:
* See if the rffd value passed.
*-----------------------------------------------------------------*/
if (short_mem_test()) {
if (fail_found == TRUE) {
pass_found = TRUE;
if (fail_found == true) {
pass_found = true;
if (current_pass_length == 0)
current_start = rqfd;
@ -2653,10 +2650,10 @@ calibration_loop:
current_pass_length = 0;
current_fail_length++;
if (fail_found == FALSE) {
fail_found = TRUE;
} else if (pass_found == TRUE) {
window_found = TRUE;
if (fail_found == false) {
fail_found = true;
} else if (pass_found == true) {
window_found = true;
break;
}
}
@ -2667,7 +2664,7 @@ calibration_loop:
/*------------------------------------------------------------------
* Make sure we found the valid read passing window. Halt if not
*-----------------------------------------------------------------*/
if (window_found == FALSE) {
if (window_found == false) {
if (rqfd_start < SDRAM_RQDC_RQFD_MAX) {
putc('\b');
putc(slash[loopi++ % 8]);
@ -2769,13 +2766,13 @@ static void test(void)
mtsdram(SDRAM_MCOPT1, (val & ~SDRAM_MCOPT1_MCHK_MASK) |
SDRAM_MCOPT1_MCHK_NON);
window_found = FALSE;
begin_found[0] = FALSE;
end_found[0] = FALSE;
search_end[0] = FALSE;
begin_found[1] = FALSE;
end_found[1] = FALSE;
search_end[1] = FALSE;
window_found = false;
begin_found[0] = false;
end_found[0] = false;
search_end[0] = false;
begin_found[1] = false;
end_found[1] = false;
search_end[1] = false;
for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) {
mfsdram(SDRAM_MB0CF + (bxcr_num << 2), bxcf[bxcr_num]);
@ -2812,32 +2809,32 @@ static void test(void)
* See if the rffd value passed.
*-----------------------------------------------------------------*/
if (i < NUMMEMTESTS) {
if ((end_found[dimm_num] == FALSE) &&
(search_end[dimm_num] == TRUE)) {
end_found[dimm_num] = TRUE;
if ((end_found[dimm_num] == false) &&
(search_end[dimm_num] == true)) {
end_found[dimm_num] = true;
}
if ((end_found[0] == TRUE) &&
(end_found[1] == TRUE))
if ((end_found[0] == true) &&
(end_found[1] == true))
break;
} else {
if (begin_found[dimm_num] == FALSE) {
begin_found[dimm_num] = TRUE;
search_end[dimm_num] = TRUE;
if (begin_found[dimm_num] == false) {
begin_found[dimm_num] = true;
search_end[dimm_num] = true;
}
}
} else {
begin_found[dimm_num] = TRUE;
end_found[dimm_num] = TRUE;
begin_found[dimm_num] = true;
end_found[dimm_num] = true;
}
}
if ((begin_found[0] == TRUE) && (begin_found[1] == TRUE))
window_found = TRUE;
if ((begin_found[0] == true) && (begin_found[1] == true))
window_found = true;
/*------------------------------------------------------------------
* Make sure we found the valid read passing window. Halt if not
*-----------------------------------------------------------------*/
if (window_found == FALSE) {
if (window_found == false) {
printf("ERROR: Cannot determine a common read delay for the "
"DIMM(s) installed.\n");
spd_ddr_init_hang ();

View File

@ -53,13 +53,6 @@
/*-----------------------------------------------------------------------------+
* Defines
*-----------------------------------------------------------------------------*/
#ifndef TRUE
#define TRUE 1
#endif
#ifndef FALSE
#define FALSE 0
#endif
#define MAXDIMMS 2
#define MAXRANKS 2
@ -279,7 +272,7 @@ static void get_spd_info(unsigned long dimm_ranks[],
unsigned long num_dimm_banks)
{
unsigned long dimm_num;
unsigned long dimm_found = FALSE;
unsigned long dimm_found = false;
unsigned long const max_ranks_per_dimm = (1 == num_dimm_banks) ? 2 : 1;
unsigned char num_of_bytes;
unsigned char total_size;
@ -334,7 +327,7 @@ static void get_spd_info(unsigned long dimm_ranks[],
"\n\n");
spd_ddr_init_hang();
}
dimm_found = TRUE;
dimm_found = true;
debug("DIMM slot %lu: populated with %lu-rank DDR2 DIMM"
"\n", dimm_num, ranks_on_dimm);
if (ranks_on_dimm > max_ranks_per_dimm) {
@ -355,7 +348,7 @@ static void get_spd_info(unsigned long dimm_ranks[],
debug("DIMM slot %lu: Not populated\n", dimm_num);
}
}
if (dimm_found == FALSE) {
if (dimm_found == false) {
printf("ERROR: No memory installed.\n");
printf("Install at least one DDR2 DIMM.\n\n");
spd_ddr_init_hang();
@ -882,7 +875,7 @@ static void program_ddr0_22(unsigned long dimm_ranks[],
/* Check for ECC */
if (0 == (spd_read(iic0_dimm_addr[dimm_num], 11) &
0x02)) {
ecc_available = FALSE;
ecc_available = false;
}
}
}

View File

@ -383,7 +383,7 @@ unsigned int memoryGetDeviceWidth (DEVICE device)
* OUTPUT:
* None.
* RETURN:
* False for invalid size, true otherwise.
* false for invalid size, true otherwise.
*
* CAUTION: PCI_functions must be implemented later To_do !!!!!!!!!!!!!!!!!
*
@ -509,7 +509,7 @@ bool memoryMapBank (MEMORY_BANK bank, unsigned int bankBase,
* None.
*
* RETURN:
* False for invalid size, true otherwise.
* false for invalid size, true otherwise.
*
* CAUTION: PCI_functions must be implemented later To_do !!!!!!!!!!!!!!!!!
*
@ -624,7 +624,7 @@ bool memoryMapDeviceSpace (DEVICE device, unsigned int deviceBase,
* None.
*
* RETURN:
* False for invalid size, true otherwise.
* false for invalid size, true otherwise.
*
*******************************************************************************/
bool memorySetPciWindow (PCI_MEM_WINDOW pciWindow, unsigned int pciWindowBase,
@ -885,7 +885,7 @@ void gtMemorySetInternalSramBaseAddr (unsigned int sramBaseAddress)
* None.
*
* RETURN:
* False for invalid size, true otherwise.
* false for invalid size, true otherwise.
*
*******************************************************************************/
bool memorySetProtectRegion (MEMORY_PROTECT_WINDOW window,
@ -1380,7 +1380,7 @@ void MemoryEnableWindow (MEMORY_WINDOW window)
* OUTPUT:
* None.
* RETURN:
* True for a closed window, false otherwise .
* true for a closed window, false otherwise .
*******************************************************************************/
MEMORY_WINDOW_STATUS MemoryGetMemWindowStatus (MEMORY_WINDOW window)
{

View File

@ -966,7 +966,7 @@ static int galmpsc_set_snoop (int mpsc, int value)
* None.
*
* RETURN:
* True for success, false otherwise.
* true for success, false otherwise.
*
*******************************************************************************/

View File

@ -46,13 +46,6 @@
**************************************************************************
**************************************************************************
*************************************************************************/
#ifndef TRUE
#define TRUE 1
#endif
#ifndef FALSE
#define FALSE 0
#endif
/* In case not using SG on Tx, define MAX_SKB_FRAGS as 0 */
#ifndef MAX_SKB_FRAGS
#define MAX_SKB_FRAGS 0

View File

@ -966,7 +966,7 @@ static int galmpsc_set_snoop (int mpsc, int value)
* None.
*
* RETURN:
* True for success, false otherwise.
* true for success, false otherwise.
*
*******************************************************************************/

View File

@ -47,13 +47,6 @@
**************************************************************************
**************************************************************************
*************************************************************************/
#ifndef TRUE
#define TRUE 1
#endif
#ifndef FALSE
#define FALSE 0
#endif
/* In case not using SG on Tx, define MAX_SKB_FRAGS as 0 */
#ifndef MAX_SKB_FRAGS
#define MAX_SKB_FRAGS 0

View File

@ -91,11 +91,6 @@ extern unsigned int INTERNAL_REG_BASE_ADDR;
#define _1G 0x40000000
#define _2G 0x80000000
#ifndef BOOL_WAS_DEFINED
#define BOOL_WAS_DEFINED
typedef enum _bool{false,true} bool;
#endif
/* Little to Big endian conversion macros */
#ifdef LE /* Little Endian */

View File

@ -477,16 +477,16 @@ int is_powerpc440ep_pass1(void)
pvr = get_pvr();
if (pvr == PVR_POWERPC_440EP_PASS1)
return TRUE;
return true;
else if (pvr == PVR_POWERPC_440EP_PASS2)
return FALSE;
return false;
else {
printf("brdutil error 3\n");
for (;;)
;
}
return(FALSE);
return false;
}
/*----------------------------------------------------------------------------+
@ -495,9 +495,9 @@ int is_powerpc440ep_pass1(void)
int is_nand_selected(void)
{
#ifdef CONFIG_BAMBOO_NAND
return TRUE;
return true;
#else
return FALSE;
return false;
#endif
}
@ -507,7 +507,7 @@ int is_nand_selected(void)
unsigned char config_on_ebc_cs4_is_small_flash(void)
{
/* Not implemented yet => returns constant value */
return TRUE;
return true;
}
/*----------------------------------------------------------------------------+
@ -561,7 +561,7 @@ void ext_bus_cntlr_init(void)
/*-------------------------------------------------------------------------+
| PPC440EP Pass1
+-------------------------------------------------------------------------*/
if (is_powerpc440ep_pass1() == TRUE) {
if (is_powerpc440ep_pass1() == true) {
switch(bootstrap_settings) {
case SDR0_PSTRP0_BOOTSTRAP_SETTINGS0:
/* Default Strap Settings 0 : CPU 400 - PLB 133 - Boot EBC 8 bit 33MHz */
@ -738,7 +738,7 @@ void ext_bus_cntlr_init(void)
/*------------------------------------------------------------------------- */
ebc0_cs0_bnap_value = EBC0_BNAP_SMALL_FLASH;
ebc0_cs0_bncr_value = EBC0_BNCR_SMALL_FLASH_CS0;
if ((is_nand_selected()) == TRUE) {
if ((is_nand_selected()) == true) {
/* NAND Flash */
ebc0_cs1_bnap_value = EBC0_BNAP_NAND_FLASH;
ebc0_cs1_bncr_value = EBC0_BNCR_NAND_FLASH_CS1;
@ -765,7 +765,7 @@ void ext_bus_cntlr_init(void)
/*------------------------------------------------------------------------- */
ebc0_cs0_bnap_value = EBC0_BNAP_LARGE_FLASH_OR_SRAM;
ebc0_cs0_bncr_value = EBC0_BNCR_LARGE_FLASH_OR_SRAM_CS0;
if ((is_nand_selected()) == TRUE) {
if ((is_nand_selected()) == true) {
/* NAND Flash */
ebc0_cs1_bnap_value = EBC0_BNAP_NAND_FLASH;
ebc0_cs1_bncr_value = EBC0_BNCR_NAND_FLASH_CS1;
@ -812,7 +812,7 @@ void ext_bus_cntlr_init(void)
ebc0_cs0_bnap_value = 0;
ebc0_cs0_bncr_value = 0;
if ((is_nand_selected()) == TRUE) {
if ((is_nand_selected()) == true) {
/* NAND Flash */
ebc0_cs1_bnap_value = EBC0_BNAP_NAND_FLASH;
ebc0_cs1_bncr_value = EBC0_BNCR_NAND_FLASH_CS1;
@ -830,7 +830,7 @@ void ext_bus_cntlr_init(void)
ebc0_cs3_bncr_value = 0;
}
if ((config_on_ebc_cs4_is_small_flash()) == TRUE) {
if ((config_on_ebc_cs4_is_small_flash()) == true) {
/* Small Flash */
ebc0_cs4_bnap_value = EBC0_BNAP_SMALL_FLASH;
ebc0_cs4_bncr_value = EBC0_BNCR_SMALL_FLASH_CS4;

View File

@ -250,9 +250,6 @@
#define PVR_POWERPC_440EP_PASS1 0x42221850
#define PVR_POWERPC_440EP_PASS2 0x422218D3
#define TRUE 1
#define FALSE 0
#define GPIO0 0
#define GPIO1 1

View File

@ -47,9 +47,6 @@ void fpga_init (void);
#define DEBUGF(fmt,args...)
#endif
#define FALSE 0
#define TRUE 1
int board_early_init_f (void)
{
/*----------------------------------------------------------------------------+

View File

@ -32,8 +32,6 @@
#define V_ULONG(a) (*(volatile unsigned long *)( a ))
#define V_BYTE(a) (*(volatile unsigned char *)( a ))
#define TRUE 0x1
#define FALSE 0x0
#define BUFFER_SIZE 0x80000
#define NO_COMMAND 0
#define GET_CODES 1

View File

@ -309,7 +309,7 @@ int read_flash(long nOffset, int *pnValue)
nValue = *(volatile unsigned short *)addr;
SSYNC();
*pnValue = nValue;
return TRUE;
return true;
}
int poll_toggle_bit(long lOffset)
@ -398,7 +398,7 @@ int erase_block_flash(int nBlock, unsigned long address)
long ulSectorOff = 0x0;
if ((nBlock < 0) || (nBlock > AFP_NumSectors))
return FALSE;
return false;
ulSectorOff = (address - CONFIG_SYS_FLASH_BASE);

View File

@ -9,9 +9,6 @@
#define YELLOW (0xD292D210) /* yellow pixel pattern */
#define WHITE (0xFE80FE80) /* white pixel pattern */
#define true 1
#define false 0
typedef struct {
unsigned int sav;
unsigned int eav;

View File

@ -260,7 +260,7 @@ int lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count,
/*
* Big epson detected
*/
reg_byte_swap = FALSE;
reg_byte_swap = false;
palette_index = 0x1e2;
palette_value = 0x1e4;
lcd_depth = 16;
@ -269,7 +269,7 @@ int lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count,
/*
* Big epson detected (with register swap bug)
*/
reg_byte_swap = TRUE;
reg_byte_swap = true;
palette_index = 0x1e3;
palette_value = 0x1e5;
lcd_depth = 16;
@ -278,7 +278,7 @@ int lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count,
/*
* Small epson detected (704)
*/
reg_byte_swap = FALSE;
reg_byte_swap = false;
palette_index = 0x15;
palette_value = 0x17;
lcd_depth = 8;
@ -287,7 +287,7 @@ int lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count,
/*
* Small epson detected (705)
*/
reg_byte_swap = FALSE;
reg_byte_swap = false;
palette_index = 0x15;
palette_value = 0x17;
lcd_depth = 8;
@ -300,7 +300,7 @@ int lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count,
/*
* S1D13505 detected
*/
reg_byte_swap = TRUE;
reg_byte_swap = true;
palette_index = 0x25;
palette_value = 0x27;
lcd_depth = 16;

View File

@ -35,11 +35,6 @@
#define LOAD_LONG(data) SWAP_LONG(data)
#define LOAD_SHORT(data) SWAP_SHORT(data)
#ifndef FALSE
#define FALSE 0
#define TRUE (!FALSE)
#endif
#define S1D_WRITE_PALETTE(p,i,r,g,b) \
{ \
out_8(&((uchar*)(p))[palette_index], (uchar)(i)); \

View File

@ -967,7 +967,7 @@ static int galmpsc_set_snoop (int mpsc, int value)
* None.
*
* RETURN:
* True for success, false otherwise.
* true for success, false otherwise.
*
*******************************************************************************/

View File

@ -47,13 +47,6 @@
**************************************************************************
**************************************************************************
*************************************************************************/
#ifndef TRUE
#define TRUE 1
#endif
#ifndef FALSE
#define FALSE 0
#endif
/* In case not using SG on Tx, define MAX_SKB_FRAGS as 0 */
#ifndef MAX_SKB_FRAGS
#define MAX_SKB_FRAGS 0

View File

@ -30,10 +30,6 @@
#define OK 0
#define ERROR (-1)
#define TRUE 1
#define FALSE 0
extern u_long pci9054_iobase;
@ -97,7 +93,7 @@ static int PciEepromWriteLongVPD (int offs, unsigned int value)
}
}
return TRUE;
return true;
}

View File

@ -113,7 +113,7 @@ void fpga_serialslave_init(void)
{
debug("%s:%d: Initialize serial slave interface\n", __FUNCTION__,
__LINE__);
fpga_pgm_fn(FALSE, FALSE, 0); /* make sure program pin is inactive */
fpga_pgm_fn(false, false, 0); /* make sure program pin is inactive */
}
@ -188,7 +188,7 @@ int fpga_done_fn(int cookie)
int fpga_pre_config_fn(int cookie)
{
debug("%s:%d: FPGA pre-configuration\n", __FUNCTION__, __LINE__);
fpga_reset(TRUE);
fpga_reset(true);
/* release init# */
out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | GPIO0_FPGA_FORCEINIT);
@ -213,9 +213,9 @@ int fpga_post_config_fn(int cookie)
/* enable PLD0..7 pins */
out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_IOEN_N);
fpga_reset(TRUE);
fpga_reset(true);
udelay (100);
fpga_reset(FALSE);
fpga_reset(false);
udelay (100);
FPGA_OUT32(&fpga->status, (gd->board_type << STATUS_HWREV_SHIFT) & STATUS_HWREV_MASK);
@ -296,7 +296,7 @@ void ngcc_fpga_serialslave_init(void)
__FUNCTION__, __LINE__);
/* make sure program pin is inactive */
ngcc_fpga_pgm_fn (FALSE, FALSE, 0);
ngcc_fpga_pgm_fn(false, false, 0);
}
/*
@ -382,10 +382,10 @@ int ngcc_fpga_pre_config_fn(int cookie)
pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
debug("%s:%d: FPGA pre-configuration\n", __FUNCTION__, __LINE__);
ngcc_fpga_reset(TRUE);
ngcc_fpga_reset(true);
FPGA_CLRBITS(&fpga->ctrla, 0xfffffe00);
ngcc_fpga_reset(TRUE);
ngcc_fpga_reset(true);
return 0;
}
@ -401,7 +401,7 @@ int ngcc_fpga_post_config_fn(int cookie)
debug("%s:%d: NGCC FPGA post configuration\n", __FUNCTION__, __LINE__);
udelay (100);
ngcc_fpga_reset(FALSE);
ngcc_fpga_reset(false);
FPGA_SETBITS(&fpga->ctrla, 0x29f8c000);

View File

@ -6,9 +6,6 @@
#include "eth.h"
#include "eth_addrtbl.h"
#define TRUE 1
#define FALSE 0
#define PRINTF printf
#ifdef CONFIG_GT_USE_MAC_HASH_TABLE
@ -160,8 +157,8 @@ u32 hashTableFunction (u32 macH, u32 macL, u32 HashSize, u32 hash_mode)
* rd - the RD field in the address table.
* Outputs
* address table entry is added.
* TRUE if success.
* FALSE if table full
* true if success.
* false if table full
*/
int addAddressTableEntry (u32 port, u32 macH, u32 macL, u32 rd, u32 skip)
{
@ -206,7 +203,7 @@ int addAddressTableEntry (u32 port, u32 macH, u32 macL, u32 rd, u32 skip)
if (i == HOP_NUMBER) {
PRINTF ("addGT64260addressTableEntry: table section is full\n");
return (FALSE);
return false;
}
/*
@ -215,7 +212,7 @@ int addAddressTableEntry (u32 port, u32 macH, u32 macL, u32 rd, u32 skip)
entry->hi = newHi;
entry->lo = newLo;
DCACHE_FLUSH_N_SYNC ((u32) entry, MAC_ENTRY_SIZE);
return (TRUE);
return true;
}
#endif /* CONFIG_GT_USE_MAC_HASH_TABLE */

View File

@ -182,7 +182,7 @@ void fpga_selectmap_init (void)
{
PRINTF ("%s:%d: Initialize SelectMap interface\n", __FUNCTION__,
__LINE__);
fpga_pgm_fn (FALSE, FALSE, 0); /* make sure program pin is inactive */
fpga_pgm_fn(false, false, 0); /* make sure program pin is inactive */
}
@ -314,7 +314,7 @@ int fpga_abort_fn (int cookie)
int fpga_pre_config_fn (int cookie)
{
PRINTF ("%s:%d: FPGA pre-configuration\n", __FUNCTION__, __LINE__);
fpga_reset (TRUE);
fpga_reset(true);
return 0;
}
@ -328,9 +328,9 @@ int fpga_post_config_fn (int cookie)
int rc;
PRINTF ("%s:%d: FPGA post configuration\n", __FUNCTION__, __LINE__);
fpga_reset (TRUE);
fpga_reset(true);
udelay (1000);
fpga_reset (FALSE);
fpga_reset(false);
udelay (1000);
/*

View File

@ -162,7 +162,7 @@ int board_eth_init(bd_t *bis)
int overwrite_console(void)
{
/* return TRUE if console should be overwritten */
/* return true if console should be overwritten */
return 0;
}

View File

@ -450,7 +450,7 @@ STATUS flashWrite (flash_dev_t * dev, int pos, char *buf, int len)
}
/*
* flashWritable returns TRUE if a range contains all F's.
* flashWritable returns true if a range contains all F's.
*/
STATUS flashWritable (flash_dev_t * dev, int pos, int len)

View File

@ -41,13 +41,6 @@
#define PRINTF(fmt,args...)
#endif
#ifndef TRUE
#define TRUE 1
#endif
#ifndef FALSE
#define FALSE 0
#endif
#if defined(CONFIG_PIP405)
extern int drv_isa_kbd_init (void);
@ -116,9 +109,9 @@ unsigned char open_cfg_super_IO(int address)
out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address,0x55); /* open config */
out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address,0x20); /* set address to DEV ID */
if(in8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address | 0x1)==0x40) /* ok Device ID is correct */
return TRUE;
return true;
else
return FALSE;
return false;
}
void close_cfg_super_IO(int address)
@ -179,7 +172,7 @@ void isa_sio_loadtable(void)
void isa_sio_setup(void)
{
if(open_cfg_super_IO(SIO_CFG_PORT)==TRUE)
if (open_cfg_super_IO(SIO_CFG_PORT) == true)
{
isa_sio_loadtable();
close_cfg_super_IO(0x3F0);

View File

@ -77,8 +77,6 @@ DECLARE_GLOBAL_DATA_PTR;
#undef SDRAM_DEBUG
#define ENABLE_ECC /* for ecc boards */
#define FALSE 0
#define TRUE 1
/* stdlib.h causes some compatibility problems; should fixe these! -- wd */
#ifndef __ldiv_t_defined
@ -771,7 +769,8 @@ int last_stage_init (void)
int overwrite_console (void)
{
return ((in8 (PLD_EXT_CONF_REG) & 0x1)==0); /* return TRUE if console should be overwritten */
/* return true if console should be overwritten */
return ((in8(PLD_EXT_CONF_REG) & 0x1) == 0);
}

View File

@ -36,9 +36,6 @@ DECLARE_GLOBAL_DATA_PTR;
#undef SDRAM_DEBUG
#define FALSE 0
#define TRUE 1
/* stdlib.h causes some compatibility problems; should fixe these! -- wd */
#ifndef __ldiv_t_defined
typedef struct {
@ -700,7 +697,8 @@ int misc_init_r (void)
int overwrite_console (void)
{
return (in8 (CONFIG_PORT_ADDR) & 0x1); /* return TRUE if console should be overwritten */
/* return true if console should be overwritten */
return in8(CONFIG_PORT_ADDR) & 0x1;
}
@ -945,7 +943,7 @@ void print_pip405_info (void)
void user_led0 (unsigned char on)
{
if (on == TRUE)
if (on == true)
out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) | 0x1));
else
out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) & 0xfe));
@ -953,7 +951,7 @@ void user_led0 (unsigned char on)
void user_led1 (unsigned char on)
{
if (on == TRUE)
if (on == true)
out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) | 0x2));
else
out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) & 0xfd));

View File

@ -962,7 +962,7 @@ static int galmpsc_set_snoop (int mpsc, int value)
* None.
*
* RETURN:
* True for success, false otherwise.
* true for success, false otherwise.
*
*******************************************************************************/

View File

@ -47,13 +47,6 @@
**************************************************************************
**************************************************************************
*************************************************************************/
#ifndef TRUE
#define TRUE 1
#endif
#ifndef FALSE
#define FALSE 0
#endif
/* In case not using SG on Tx, define MAX_SKB_FRAGS as 0 */
#ifndef MAX_SKB_FRAGS
#define MAX_SKB_FRAGS 0

View File

@ -94,11 +94,11 @@ uint Daq_BRG_Get_Div16(uint brg)
if (*brg_ptr & CPM_BRG_DIV16) {
/* DIV16 active */
return (TRUE);
return true;
}
else {
/* DIV16 inactive */
return (FALSE);
return false;
}
}

View File

@ -22,11 +22,6 @@
* MA 02111-1307 USA
*/
#ifndef FALSE
#define FALSE 0
#define TRUE (!FALSE)
#endif
#define SLRCLK_EN_MASK 0x00040000 /* PA13 - SLRCLK_EN* */
#define MIN_SAMPLE_RATE 4000 /* Minimum sample rate */

View File

@ -113,7 +113,7 @@ static int fpga_done_fn(int cookie)
static int fpga_pre_config_fn(int cookie)
{
debug("%s:%d: FPGA pre-configuration\n", __func__, __LINE__);
fpga_reset(TRUE);
fpga_reset(true);
return 0;
}
@ -128,9 +128,9 @@ static int fpga_post_config_fn(int cookie)
debug("%s:%d: FPGA post configuration\n", __func__, __LINE__);
fpga_reset(TRUE);
fpga_reset(true);
udelay(100);
fpga_reset(FALSE);
fpga_reset(false);
udelay(100);
return rc;
@ -200,7 +200,7 @@ static Xilinx_desc fpga[CONFIG_FPGA_COUNT] = {
static void fpga_serialslave_init(void)
{
debug("%s:%d: Initialize serial slave interface\n", __func__, __LINE__);
fpga_pgm_fn(FALSE, FALSE, 0); /* make sure program pin is inactive */
fpga_pgm_fn(false, false, 0); /* make sure program pin is inactive */
}
static int expi_setup(int freq)

View File

@ -179,9 +179,9 @@ int fpga_post_config_fn(int cookie)
{
debug("%s:%d: FPGA post-configuration\n", __func__, __LINE__);
fpga_reset(TRUE);
fpga_reset(true);
udelay(100);
fpga_reset(FALSE);
fpga_reset(false);
return 0;
}

View File

@ -72,7 +72,7 @@ int downstring __P ((char *));
* F_INSTR - output raw instruction.
* F_LINENO - show line # info if available.
*
* Returns TRUE if the area was successfully disassembled or FALSE if
* Returns true if the area was successfully disassembled or false if
* a problem was encountered with accessing the memory.
*/
@ -137,8 +137,8 @@ int disppc (unsigned char *memaddr, unsigned char *virtual, int num_instr,
for (i = 0; i < num_instr; ++i, memaddr += 4, ctx.virtual += 4) {
#ifdef USE_SOURCE_CODE
if (ctx.flags & F_LINENO) {
if ((line_info_from_addr ((Elf32_Word) ctx.virtual, filename,
funcname, &line_no) == TRUE) &&
if ((line_info_from_addr ((Elf32_Word) ctx.virtual,
filename, funcname, &line_no) == true) &&
((line_no != last_line_no) ||
(strcmp (last_funcname, funcname) != 0))) {
print_source_line (filename, funcname, line_no, pfunc);
@ -154,15 +154,15 @@ int disppc (unsigned char *memaddr, unsigned char *virtual, int num_instr,
#ifdef USE_SOURCE_CODE
if (ctx.flags & F_SYMBOL) {
if ((symname =
symbol_name_from_addr ((Elf32_Word) ctx.virtual,
TRUE, 0)) != 0) {
symbol_name_from_addr((Elf32_Word) ctx.virtual,
true, 0)) != 0) {
cursym = symname;
symoffset = 0;
} else {
if ((cursym == 0) &&
((symname =
symbol_name_from_addr ((Elf32_Word) ctx.virtual,
FALSE, &symoffset)) != 0)) {
symbol_name_from_addr((Elf32_Word) ctx.virtual,
false, &symoffset)) != 0)) {
cursym = symname;
} else {
symoffset += 4;
@ -205,7 +205,8 @@ int disppc (unsigned char *memaddr, unsigned char *virtual, int num_instr,
}
if (((ctx.flags & F_SIMPLE) == 0) ||
(ctx.op->hfunc == 0) || ((*ctx.op->hfunc) (&ctx) == FALSE)) {
(ctx.op->hfunc == 0) ||
((*ctx.op->hfunc) (&ctx) == false)) {
sprintf (&ctx.data[ctx.datalen], "%-7s ", ctx.op->name);
ctx.datalen += 8;
print_operands (&ctx);
@ -214,7 +215,7 @@ int disppc (unsigned char *memaddr, unsigned char *virtual, int num_instr,
(*pfunc) (ctx.data);
}
return TRUE;
return true;
} /* disppc */
@ -364,10 +365,10 @@ int print_operands (struct ppc_ctx *ctx)
* value The address of an unsigned long to be filled in
* with the value of the operand if it is found. This
* will only be filled in if the function returns
* TRUE. This may be passed as 0 if the value is
* true. This may be passed as 0 if the value is
* not required.
*
* Returns TRUE if the operand was found or FALSE if it was not.
* Returns true if the operand was found or false if it was not.
*/
int get_operand_value (struct opcode *op, unsigned long instr,
@ -379,7 +380,7 @@ int get_operand_value (struct opcode *op, unsigned long instr,
/*------------------------------------------------------------*/
if (field > n_operands) {
return FALSE; /* bad operand ?! */
return false; /* bad operand ?! */
}
/* Walk through the operands and list each in order */
@ -393,10 +394,10 @@ int get_operand_value (struct opcode *op, unsigned long instr,
if (value) {
*value = (instr >> opr->shift) & ((1 << opr->bits) - 1);
}
return TRUE;
return true;
}
return FALSE;
return false;
} /* operand_value */
@ -649,7 +650,7 @@ int tbr_value (char *name)
* Arguments:
* ctx A pointer to the disassembler context record.
*
* Returns TRUE if the simpler form was printed or FALSE if it was not.
* Returns true if the simpler form was printed or false if it was not.
*/
int handle_bc (struct ppc_ctx *ctx)
@ -669,33 +670,33 @@ int handle_bc (struct ppc_ctx *ctx)
/*------------------------------------------------------------*/
if (get_operand_value (ctx->op, ctx->instr, O_BO, &bo) == FALSE)
return FALSE;
if (get_operand_value(ctx->op, ctx->instr, O_BO, &bo) == false)
return false;
if (get_operand_value (ctx->op, ctx->instr, O_BI, &bi) == FALSE)
return FALSE;
if (get_operand_value(ctx->op, ctx->instr, O_BI, &bi) == false)
return false;
if ((bo == 12) && (bi == 0)) {
ctx->op = &blt;
sprintf (&ctx->data[ctx->datalen], "%-7s ", ctx->op->name);
ctx->datalen += 8;
print_operands (ctx);
return TRUE;
return true;
} else if ((bo == 4) && (bi == 10)) {
ctx->op = &bne;
sprintf (&ctx->data[ctx->datalen], "%-7s ", ctx->op->name);
ctx->datalen += 8;
print_operands (ctx);
return TRUE;
return true;
} else if ((bo == 16) && (bi == 0)) {
ctx->op = &bdnz;
sprintf (&ctx->data[ctx->datalen], "%-7s ", ctx->op->name);
ctx->datalen += 8;
print_operands (ctx);
return TRUE;
return true;
}
return FALSE;
return false;
} /* handle_blt */
@ -719,7 +720,7 @@ int handle_bc (struct ppc_ctx *ctx)
* pfunc The address of a function to call to print the output.
*
*
* Returns TRUE if it was able to output the line info, or false if it was
* Returns true if it was able to output the line info, or false if it was
* not.
*/
@ -734,7 +735,7 @@ int print_source_line (char *filename, char *funcname,
sprintf (out_buf, "%s %s(): line %d", filename, funcname, line_no);
(*pfunc) (out_buf);
return TRUE;
return true;
} /* print_source_line */
@ -1039,14 +1040,14 @@ int downstring (char *s)
* Arguments:
* nextaddr The address (to be filled in) of the next
* instruction to execute. This will only be a valid
* address if TRUE is returned.
* address if true is returned.
*
* step_over A flag indicating how to compute addresses for
* branch statements:
* TRUE = Step over the branch (next)
* FALSE = step into the branch (step)
* true = Step over the branch (next)
* false = step into the branch (step)
*
* Returns TRUE if it was able to compute the address. Returns FALSE if
* Returns true if it was able to compute the address. Returns false if
* it has a problem reading the current instruction or one of the registers.
*/
@ -1075,7 +1076,7 @@ int find_next_address (unsigned char *nextaddr, int step_over,
if (nextaddr == 0 || regs == 0) {
printf ("find_next_address: bad args");
return FALSE;
return false;
}
pc = regs->nip & 0xfffffffc;
@ -1083,7 +1084,7 @@ int find_next_address (unsigned char *nextaddr, int step_over,
if ((op = find_opcode (instr)) == (struct opcode *) 0) {
printf ("find_next_address: can't parse opcode 0x%lx", instr);
return FALSE;
return false;
}
ctr = regs->ctr;
@ -1100,7 +1101,7 @@ int find_next_address (unsigned char *nextaddr, int step_over,
!get_operand_value (op, instr, O_BI, &bi) ||
!get_operand_value (op, instr, O_AA, &aa) ||
!get_operand_value (op, instr, O_LK, &lk))
return FALSE;
return false;
if ((addr & (1 << 13)) != 0)
addr = addr - (1 << 14);
@ -1116,7 +1117,7 @@ int find_next_address (unsigned char *nextaddr, int step_over,
if (!get_operand_value (op, instr, O_LI, &addr) ||
!get_operand_value (op, instr, O_AA, &aa) ||
!get_operand_value (op, instr, O_LK, &lk))
return FALSE;
return false;
if ((addr & (1 << 23)) != 0)
addr = addr - (1 << 24);
@ -1130,7 +1131,7 @@ int find_next_address (unsigned char *nextaddr, int step_over,
if (!get_operand_value (op, instr, O_BO, &bo) ||
!get_operand_value (op, instr, O_BI, &bi) ||
!get_operand_value (op, instr, O_LK, &lk))
return FALSE;
return false;
addr = ctr;
aa = 1;
@ -1143,7 +1144,7 @@ int find_next_address (unsigned char *nextaddr, int step_over,
if (!get_operand_value (op, instr, O_BO, &bo) ||
!get_operand_value (op, instr, O_BI, &bi) ||
!get_operand_value (op, instr, O_LK, &lk))
return FALSE;
return false;
addr = lr;
aa = 1;
@ -1227,12 +1228,12 @@ int find_next_address (unsigned char *nextaddr, int step_over,
step = next = pc + 4;
}
if (step_over == TRUE)
if (step_over == true)
*(unsigned long *) nextaddr = next;
else
*(unsigned long *) nextaddr = step;
return TRUE;
return true;
} /* find_next_address */

View File

@ -292,7 +292,7 @@ int do_bedbug_step (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
return 1;
}
if (!find_next_address ((unsigned char *) &addr, FALSE, bug_ctx.regs))
if (!find_next_address((unsigned char *) &addr, false, bug_ctx.regs))
return 1;
if (bug_ctx.set)
@ -323,7 +323,7 @@ int do_bedbug_next (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
return 1;
}
if (!find_next_address ((unsigned char *) &addr, TRUE, bug_ctx.regs))
if (!find_next_address((unsigned char *) &addr, true, bug_ctx.regs))
return 1;
if (bug_ctx.set)

View File

@ -39,13 +39,6 @@
#define PRINTF(fmt,args...)
#endif
#ifndef TRUE
#define TRUE 1
#endif
#ifndef FALSE
#define FALSE 0
#endif
/*#if defined(CONFIG_CMD_DATE) */
/*#include <rtc.h> */
/*#endif */
@ -214,9 +207,9 @@ int wait_for_fdc_int(void)
timeout--;
udelay(10);
if(timeout==0) /* timeout occured */
return FALSE;
return false;
}
return TRUE;
return true;
}
/* reads a byte from the FIFO of the FDC and checks direction and RQM bit
@ -244,7 +237,7 @@ int fdc_need_more_output(void)
c=(unsigned char)read_fdc_byte();
printf("Error: more output: %x\n",c);
}
return TRUE;
return true;
}
@ -260,10 +253,10 @@ int write_fdc_byte(unsigned char val)
udelay(10);
fdc_need_more_output();
if(timeout==0) /* timeout occured */
return FALSE;
return false;
}
write_fdc_reg(FDC_FIFO,val);
return TRUE;
return true;
}
/* sets up all FDC commands and issues it to the FDC. If
@ -344,9 +337,9 @@ int fdc_issue_cmd(FDC_COMMAND_STRUCT *pCMD,FD_GEO_STRUCT *pFG)
}
for(i=0;i<pCMD->cmdlen;i++) {
/* PRINTF("write cmd%d = 0x%02X\n",i,pCMD->cmd[i]); */
if(write_fdc_byte(pCMD->cmd[i])==FALSE) {
if (write_fdc_byte(pCMD->cmd[i]) == false) {
PRINTF("Error: timeout while issue cmd%d\n",i);
return FALSE;
return false;
}
}
timeout=FDC_TIME_OUT;
@ -355,12 +348,12 @@ int fdc_issue_cmd(FDC_COMMAND_STRUCT *pCMD,FD_GEO_STRUCT *pFG)
timeout--;
if(timeout==0) {
PRINTF(" timeout while reading result%d MSR=0x%02X\n",i,read_fdc_reg(FDC_MSR));
return FALSE;
return false;
}
}
pCMD->result[i]=(unsigned char)read_fdc_byte();
}
return TRUE;
return true;
}
/* selects the drive assigned in the cmd structur and
@ -391,9 +384,10 @@ void stop_fdc_drive(FDC_COMMAND_STRUCT *pCMD)
int fdc_recalibrate(FDC_COMMAND_STRUCT *pCMD,FD_GEO_STRUCT *pFG)
{
pCMD->cmd[COMMAND]=FDC_CMD_RECALIBRATE;
if(fdc_issue_cmd(pCMD,pFG)==FALSE)
return FALSE;
while(wait_for_fdc_int()!=TRUE);
if (fdc_issue_cmd(pCMD, pFG) == false)
return false;
while (wait_for_fdc_int() != true);
pCMD->cmd[COMMAND]=FDC_CMD_SENSE_INT;
return(fdc_issue_cmd(pCMD,pFG));
}
@ -403,9 +397,10 @@ int fdc_recalibrate(FDC_COMMAND_STRUCT *pCMD,FD_GEO_STRUCT *pFG)
int fdc_seek(FDC_COMMAND_STRUCT *pCMD,FD_GEO_STRUCT *pFG)
{
pCMD->cmd[COMMAND]=FDC_CMD_SEEK;
if(fdc_issue_cmd(pCMD,pFG)==FALSE)
return FALSE;
while(wait_for_fdc_int()!=TRUE);
if (fdc_issue_cmd(pCMD, pFG) == false)
return false;
while (wait_for_fdc_int() != true);
pCMD->cmd[COMMAND]=FDC_CMD_SENSE_INT;
return(fdc_issue_cmd(pCMD,pFG));
}
@ -421,7 +416,7 @@ int fdc_terminate(FDC_COMMAND_STRUCT *pCMD)
for(i=0;i<7;i++) {
pCMD->result[i]=(unsigned char)read_fdc_byte();
}
return TRUE;
return true;
}
/* reads data from FDC, seek commands are issued automatic */
@ -440,18 +435,18 @@ int fdc_read_data(unsigned char *buffer, unsigned long blocks,FDC_COMMAND_STRUCT
retriesrw=0;
retriescal=0;
offset=0;
if(fdc_seek(pCMD,pFG)==FALSE) {
if (fdc_seek(pCMD, pFG) == false) {
stop_fdc_drive(pCMD);
if (flags)
enable_interrupts();
return FALSE;
return false;
}
if((pCMD->result[STATUS_0]&0x20)!=0x20) {
printf("Seek error Status: %02X\n",pCMD->result[STATUS_0]);
stop_fdc_drive(pCMD);
if (flags)
enable_interrupts();
return FALSE;
return false;
}
/* now determine the next seek point */
/* lastblk=pCMD->blnr + blocks; */
@ -466,11 +461,11 @@ int fdc_read_data(unsigned char *buffer, unsigned long blocks,FDC_COMMAND_STRUCT
retryrw:
len=sect_size * readblk;
pCMD->cmd[COMMAND]=FDC_CMD_READ;
if(fdc_issue_cmd(pCMD,pFG)==FALSE) {
if (fdc_issue_cmd(pCMD, pFG) == false) {
stop_fdc_drive(pCMD);
if (flags)
enable_interrupts();
return FALSE;
return false;
}
for (i=0;i<len;i++) {
timeout=FDC_TIME_OUT;
@ -492,15 +487,15 @@ retryrw:
stop_fdc_drive(pCMD);
if (flags)
enable_interrupts();
return FALSE;
return false;
}
else {
PRINTF(" trying to recalibrate Try %d\n",retriescal);
if(fdc_recalibrate(pCMD,pFG)==FALSE) {
if (fdc_recalibrate(pCMD, pFG) == false) {
stop_fdc_drive(pCMD);
if (flags)
enable_interrupts();
return FALSE;
return false;
}
retriesrw=0;
goto retrycal;
@ -512,7 +507,7 @@ retryrw:
} /* else >FDC_RW_RETRIES */
}/* if output */
timeout--;
}while(TRUE);
} while (true);
} /* for len */
/* the last sector of a track or all data has been read,
* we need to get the results */
@ -530,22 +525,22 @@ retryrw:
readblk=blocks;
retrycal:
/* a seek is necessary */
if(fdc_seek(pCMD,pFG)==FALSE) {
if (fdc_seek(pCMD, pFG) == false) {
stop_fdc_drive(pCMD);
if (flags)
enable_interrupts();
return FALSE;
return false;
}
if((pCMD->result[STATUS_0]&0x20)!=0x20) {
PRINTF("Seek error Status: %02X\n",pCMD->result[STATUS_0]);
stop_fdc_drive(pCMD);
return FALSE;
return false;
}
}while(TRUE); /* start over */
} while (true); /* start over */
stop_fdc_drive(pCMD); /* switch off drive */
if (flags)
enable_interrupts();
return TRUE;
return true;
}
/* Scan all drives and check if drive is present and disk is inserted */
@ -559,20 +554,20 @@ int fdc_check_drive(FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG)
pCMD->drive=drives;
select_fdc_drive(pCMD);
pCMD->blnr=0; /* set to the 1st block */
if(fdc_recalibrate(pCMD,pFG)==FALSE)
if (fdc_recalibrate(pCMD, pFG) == false)
continue;
if((pCMD->result[STATUS_0]&0x10)==0x10)
continue;
/* ok drive connected check for disk */
state|=(1<<drives);
pCMD->blnr=pFG->size; /* set to the last block */
if(fdc_seek(pCMD,pFG)==FALSE)
if (fdc_seek(pCMD, pFG) == false)
continue;
pCMD->blnr=0; /* set to the 1st block */
if(fdc_recalibrate(pCMD,pFG)==FALSE)
if (fdc_recalibrate(pCMD, pFG) == false)
continue;
pCMD->cmd[COMMAND]=FDC_CMD_READ_ID;
if(fdc_issue_cmd(pCMD,pFG)==FALSE)
if (fdc_issue_cmd(pCMD, pFG) == false)
continue;
state|=(0x10<<drives);
}
@ -584,7 +579,7 @@ int fdc_check_drive(FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG)
((state&(0x10<<i))==(0x10<<i)) ? pFG->name : "");
}
pCMD->flags=state;
return TRUE;
return true;
}
@ -611,9 +606,9 @@ int fdc_setup(int drive, FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG)
write_fdc_reg(FDC_CCR,pFG->rate);
/* then initialize the DSR */
write_fdc_reg(FDC_DSR,pFG->rate);
if(wait_for_fdc_int()==FALSE) {
if (wait_for_fdc_int() == false) {
PRINTF("Time Out after writing CCR\n");
return FALSE;
return false;
}
/* now issue sense Interrupt and status command
* assuming only one drive present (drive 0) */
@ -621,7 +616,7 @@ int fdc_setup(int drive, FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG)
for(i=0;i<4;i++) {
/* issue sense interrupt for all 4 possible drives */
pCMD->cmd[COMMAND]=FDC_CMD_SENSE_INT;
if(fdc_issue_cmd(pCMD,pFG)==FALSE) {
if (fdc_issue_cmd(pCMD, pFG) == false) {
PRINTF("Sense Interrupt for drive %d failed\n",i);
}
}
@ -629,24 +624,24 @@ int fdc_setup(int drive, FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG)
pCMD->drive=drive;
select_fdc_drive(pCMD);
pCMD->cmd[COMMAND]=FDC_CMD_CONFIGURE;
if(fdc_issue_cmd(pCMD,pFG)==FALSE) {
if (fdc_issue_cmd(pCMD, pFG) == false) {
PRINTF(" configure timeout\n");
stop_fdc_drive(pCMD);
return FALSE;
return false;
}
/* issue specify command */
pCMD->cmd[COMMAND]=FDC_CMD_SPECIFY;
if(fdc_issue_cmd(pCMD,pFG)==FALSE) {
if (fdc_issue_cmd(pCMD, pFG) == false) {
PRINTF(" specify timeout\n");
stop_fdc_drive(pCMD);
return FALSE;
return false;
}
/* then, we clear the reset in the DOR */
/* fdc_check_drive(pCMD,pFG); */
/* write_fdc_reg(FDC_DOR,0x04); */
return TRUE;
return true;
}
#if defined(CONFIG_CMD_FDOS)
@ -664,30 +659,30 @@ int fdc_fdos_init (int drive)
FDC_COMMAND_STRUCT *pCMD = &cmd;
/* setup FDC and scan for drives */
if(fdc_setup(drive,pCMD,pFG)==FALSE) {
if (fdc_setup(drive, pCMD, pFG) == false) {
printf("\n** Error in setup FDC **\n");
return FALSE;
return false;
}
if(fdc_check_drive(pCMD,pFG)==FALSE) {
if (fdc_check_drive(pCMD, pFG) == false) {
printf("\n** Error in check_drives **\n");
return FALSE;
return false;
}
if((pCMD->flags&(1<<drive))==0) {
/* drive not available */
printf("\n** Drive %d not available **\n",drive);
return FALSE;
return false;
}
if((pCMD->flags&(0x10<<drive))==0) {
/* no disk inserted */
printf("\n** No disk inserted in drive %d **\n",drive);
return FALSE;
return false;
}
/* ok, we have a valid source */
pCMD->drive=drive;
/* read first block */
pCMD->blnr=0;
return TRUE;
return true;
}
/**************************************************************************
* int fdc_fdos_seek
@ -747,11 +742,11 @@ int do_fdcboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
return CMD_RET_USAGE;
}
/* setup FDC and scan for drives */
if(fdc_setup(boot_drive,pCMD,pFG)==FALSE) {
if (fdc_setup(boot_drive, pCMD, pFG) == false) {
printf("\n** Error in setup FDC **\n");
return 1;
}
if(fdc_check_drive(pCMD,pFG)==FALSE) {
if (fdc_check_drive(pCMD, pFG) == false) {
printf("\n** Error in check_drives **\n");
return 1;
}
@ -769,7 +764,7 @@ int do_fdcboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
pCMD->drive=boot_drive;
/* read first block */
pCMD->blnr=0;
if(fdc_read_data((unsigned char *)addr,1,pCMD,pFG)==FALSE) {
if (fdc_read_data((unsigned char *)addr, 1, pCMD, pFG) == false) {
printf("\nRead error:");
for(i=0;i<7;i++)
printf("result%d: 0x%02X\n",i,pCMD->result[i]);
@ -801,7 +796,7 @@ int do_fdcboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
nrofblk++;
printf("Loading %ld Bytes (%d blocks) at 0x%08lx..\n",imsize,nrofblk,addr);
pCMD->blnr=0;
if(fdc_read_data((unsigned char *)addr,nrofblk,pCMD,pFG)==FALSE) {
if (fdc_read_data((unsigned char *)addr, nrofblk, pCMD, pFG) == false) {
/* read image block */
printf("\nRead error:");
for(i=0;i<7;i++)

View File

@ -110,7 +110,7 @@ void scsi_scan(int mode)
scsi_dev_desc[i].vendor[0]=0;
scsi_dev_desc[i].product[0]=0;
scsi_dev_desc[i].revision[0]=0;
scsi_dev_desc[i].removable=FALSE;
scsi_dev_desc[i].removable = false;
scsi_dev_desc[i].if_type=IF_TYPE_SCSI;
scsi_dev_desc[i].dev=i;
scsi_dev_desc[i].part_type=PART_TYPE_UNKNOWN;
@ -125,7 +125,7 @@ void scsi_scan(int mode)
pccb->pdata=(unsigned char *)&tempbuff;
pccb->datalen=512;
scsi_setup_inquiry(pccb);
if(scsi_exec(pccb)!=TRUE) {
if (scsi_exec(pccb) != true) {
if(pccb->contr_stat==SCSI_SEL_TIME_OUT) {
debug ("Selection timeout ID %d\n",pccb->target);
continue; /* selection timeout => assuming no device present */
@ -139,7 +139,7 @@ void scsi_scan(int mode)
continue; /* skip unknown devices */
}
if((modi&0x80)==0x80) /* drive is removable */
scsi_dev_desc[scsi_max_devs].removable=TRUE;
scsi_dev_desc[scsi_max_devs].removable=true;
/* get info for this device */
scsi_ident_cpy((unsigned char *)&scsi_dev_desc[scsi_max_devs].vendor[0],
&tempbuff[8], 8);
@ -152,8 +152,8 @@ void scsi_scan(int mode)
pccb->datalen=0;
scsi_setup_test_unit_ready(pccb);
if(scsi_exec(pccb)!=TRUE) {
if(scsi_dev_desc[scsi_max_devs].removable==TRUE) {
if (scsi_exec(pccb) != true) {
if (scsi_dev_desc[scsi_max_devs].removable == true) {
scsi_dev_desc[scsi_max_devs].type=perq;
goto removable;
}
@ -404,7 +404,7 @@ static ulong scsi_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer)
debug("scsi_read_ext: startblk " LBAF
", blccnt %x buffer %lx\n",
start, smallblks, buf_addr);
if(scsi_exec(pccb)!=TRUE) {
if (scsi_exec(pccb) != true) {
scsi_print_error(pccb);
blkcnt-=blks;
break;
@ -458,7 +458,7 @@ static ulong scsi_write(int device, ulong blknr,
}
debug("%s: startblk " LBAF ", blccnt %x buffer %lx\n",
__func__, start, smallblks, buf_addr);
if (scsi_exec(pccb) != TRUE) {
if (scsi_exec(pccb) != true) {
scsi_print_error(pccb);
blkcnt -= blks;
break;
@ -521,7 +521,7 @@ int scsi_read_capacity(ccb *pccb, lbaint_t *capacity, unsigned long *blksz)
pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
pccb->datalen = 8;
if (scsi_exec(pccb) != TRUE)
if (scsi_exec(pccb) != true)
return 1;
*capacity = ((lbaint_t)pccb->pdata[0] << 24) |
@ -547,7 +547,7 @@ int scsi_read_capacity(ccb *pccb, lbaint_t *capacity, unsigned long *blksz)
pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
pccb->datalen = 16;
if (scsi_exec(pccb) != TRUE)
if (scsi_exec(pccb) != true)
return 1;
*capacity = ((uint64_t)pccb->pdata[0] << 56) |

View File

@ -201,7 +201,7 @@
MORECORE_FAILURE (default: -1)
The value returned upon failure of MORECORE.
MORECORE_CLEARS (default 1)
True (1) if the routine mapped to MORECORE zeroes out memory (which
true (1) if the routine mapped to MORECORE zeroes out memory (which
holds for sbrk).
DEFAULT_TRIM_THRESHOLD
DEFAULT_TOP_PAD

View File

@ -198,7 +198,7 @@
MORECORE_FAILURE (default: -1)
The value returned upon failure of MORECORE.
MORECORE_CLEARS (default 1)
True (1) if the routine mapped to MORECORE zeroes out memory (which
true (1) if the routine mapped to MORECORE zeroes out memory (which
holds for sbrk).
DEFAULT_TRIM_THRESHOLD
DEFAULT_TOP_PAD

View File

@ -52,10 +52,6 @@
/* Length of the BIOS image */
#define MAX_BIOSLEN (128 * 1024L)
/* Define some useful types and macros */
#define true 1
#define false 0
/* Place to save PCI BAR's that we change and later restore */
static u32 saveROMBaseAddress;
static u32 saveBaseAddress10;
@ -242,7 +238,7 @@ pcidev - PCI device info for the video card on the bus to boot
VGAInfo - BIOS emulator VGA info structure
RETURNS:
True if successfully initialised, false if not.
true if successfully initialised, false if not.
REMARKS:
Loads and POST's the display controllers BIOS, directly from the BIOS
@ -295,7 +291,7 @@ static int PCI_postController(pci_dev_t pcidev, BE_VGAInfo * VGAInfo)
PARAMETERS:
pcidev - PCI device info for the video card on the bus to boot
pVGAInfo - Place to return VGA info structure is requested
cleanUp - True to clean up on exit, false to leave emulator active
cleanUp - true to clean up on exit, false to leave emulator active
REMARKS:
Boots the PCI/AGP video card on the bus using the Video ROM BIOS image

View File

@ -127,9 +127,9 @@ biosmem_limit - Limit of the BIOS image
busmem_base - Base of the VGA bus memory
timer - Timer used to emulate PC timer ports
timer0 - Latched value for timer 0
timer0Latched - True if timer 0 value was just latched
timer0Latched - true if timer 0 value was just latched
timer2 - Current value for timer 2
emulateVGA - True to emulate VGA I/O and memory accesses
emulateVGA - true to emulate VGA I/O and memory accesses
****************************************************************************/
typedef struct {

View File

@ -309,7 +309,7 @@ void x86emu_single_step(void)
case 'P':
noDecode = (noDecode) ? 0 : 1;
printk("Toggled decoding to %s\n",
(noDecode) ? "FALSE" : "TRUE");
(noDecode) ? "false" : "true");
break;
case 't':
case 0:

View File

@ -865,14 +865,14 @@ int scsi_exec(ccb *pccb)
break;
default:
printf("Unsupport SCSI command 0x%02x\n", pccb->cmd[0]);
return FALSE;
return false;
}
if (ret) {
debug("SCSI command 0x%02x ret errno %d\n", pccb->cmd[0], ret);
return FALSE;
return false;
}
return TRUE;
return true;
}

View File

@ -360,7 +360,7 @@ int init_sata(int dev)
if (status == 0x7f) {
printf("Hard Disk not found.\n");
dev_state = SATA_NODEVICE;
rc = FALSE;
rc = false;
return rc;
}
@ -381,7 +381,7 @@ int init_sata(int dev)
printf("** TimeOUT **\n");
dev_state = SATA_NODEVICE;
rc = FALSE;
rc = false;
return rc;
}
if ((i >= 100) && ((i % 100) == 0))
@ -458,7 +458,7 @@ static int sata_dwc_softreset(struct ata_port *ap)
} else {
printf("No device found\n");
dev_state = SATA_NODEVICE;
return FALSE;
return false;
}
tmp = ATA_DEVICE_OBS;
@ -737,7 +737,7 @@ static int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
status = ata_busy_wait(ap, ATA_BUSY, 30000);
if (status & ATA_BUSY) {
printf("BSY = 0 check. timeout.\n");
rc = FALSE;
rc = false;
return rc;
}
@ -987,7 +987,7 @@ unsigned ata_exec_internal(struct ata_device *dev,
status = ata_busy_wait(ap, ATA_BUSY, 300000);
if (status & ATA_BUSY) {
printf("BSY = 0 check. timeout.\n");
rc = FALSE;
rc = false;
return rc;
}
@ -997,7 +997,7 @@ unsigned ata_exec_internal(struct ata_device *dev,
tag = ATA_TAG_INTERNAL;
if (test_and_set_bit(tag, &ap->qc_allocated)) {
rc = FALSE;
rc = false;
return rc;
}
@ -1656,14 +1656,14 @@ static int check_sata_dev_state(void)
ret = ata_dev_read_sectors(pdata, datalen, 0, 1);
if (ret == TRUE)
if (ret == true)
break;
i++;
if (i > (ATA_RESET_TIME * 100)) {
printf("** TimeOUT **\n");
dev_state = SATA_NODEVICE;
return FALSE;
return false;
}
if ((i >= 100) && ((i % 100) == 0))
@ -1672,7 +1672,7 @@ static int check_sata_dev_state(void)
dev_state = SATA_READY;
return TRUE;
return true;
}
static unsigned int ata_dev_set_feature(struct ata_device *dev,
@ -1772,7 +1772,7 @@ ulong sata_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer)
blks = 0;
}
if (ata_dev_read_sectors(pdata, datalen, block, n_block) != TRUE) {
if (ata_dev_read_sectors(pdata, datalen, block, n_block) != true) {
printf("sata_dwc : Hard disk read error.\n");
blkcnt -= blks;
break;
@ -1795,7 +1795,7 @@ static int ata_dev_read_sectors(unsigned char *pdata, unsigned long datalen,
int may_fallback = 1;
if (dev_state == SATA_ERROR)
return FALSE;
return false;
ata_dev_select(ap, dev->devno, 1, 1);
@ -1893,11 +1893,11 @@ retry:
goto err_out;
}
return TRUE;
return true;
err_out:
printf("failed to READ SECTORS (%s, err_mask=0x%x)\n", reason, err_mask);
return FALSE;
return false;
}
#if defined(CONFIG_SATA_DWC) && !defined(CONFIG_LBA48)
@ -1946,7 +1946,7 @@ ulong sata_write(int device, ulong blknr, lbaint_t blkcnt, const void *buffer)
blks = 0;
}
if (ata_dev_write_sectors(pdata, datalen, block, n_block) != TRUE) {
if (ata_dev_write_sectors(pdata, datalen, block, n_block) != true) {
printf("sata_dwc : Hard disk read error.\n");
blkcnt -= blks;
break;
@ -1969,7 +1969,7 @@ static int ata_dev_write_sectors(unsigned char* pdata, unsigned long datalen,
int may_fallback = 1;
if (dev_state == SATA_ERROR)
return FALSE;
return false;
ata_dev_select(ap, dev->devno, 1, 1);
@ -2068,9 +2068,9 @@ retry:
goto err_out;
}
return TRUE;
return true;
err_out:
printf("failed to WRITE SECTORS (%s, err_mask=0x%x)\n", reason, err_mask);
return FALSE;
return false;
}

View File

@ -467,11 +467,4 @@ struct ata_port {
unsigned char *pdata;
};
#ifndef TRUE
#define TRUE 1
#endif
#ifndef FALSE
#define FALSE 0
#endif
#endif

View File

@ -764,9 +764,9 @@ int scsi_exec(ccb *pccb)
retry:
scsi_issue(pccb);
if(pccb->contr_stat!=SIR_COMPLETE)
return FALSE;
return false;
if(pccb->status==S_GOOD)
return TRUE;
return true;
if(pccb->status==S_CHECK_COND) { /* check condition */
for(i=0;i<16;i++)
tmpcmd[i]=pccb->cmd[i];
@ -797,12 +797,12 @@ retry:
case SENSE_NO_SENSE:
case SENSE_RECOVERED_ERROR:
/* seems to be ok */
return TRUE;
return true;
break;
case SENSE_NOT_READY:
if((pccb->sense_buf[12]!=0x04)||(pccb->sense_buf[13]!=0x01)) {
/* if device is not in process of becoming ready */
return FALSE;
return false;
break;
} /* else fall through */
case SENSE_UNIT_ATTENTION:
@ -814,13 +814,13 @@ retry:
goto retry;
}
PRINTF("Target %d not ready, %d retried\n",pccb->target,retrycnt);
return FALSE;
return false;
default:
return FALSE;
return false;
}
}
PRINTF("Status = %X\n",pccb->status);
return FALSE;
return false;
}

View File

@ -140,7 +140,7 @@ static int ACEX1K_ps_load(Altera_desc *desc, const void *buf, size_t bsize)
}
/* Establish the initial state */
(*fn->config) (TRUE, TRUE, cookie); /* Assert nCONFIG */
(*fn->config) (true, true, cookie); /* Assert nCONFIG */
udelay(2); /* T_cfg > 2us */
@ -152,7 +152,7 @@ static int ACEX1K_ps_load(Altera_desc *desc, const void *buf, size_t bsize)
return FPGA_FAIL;
}
(*fn->config) (FALSE, TRUE, cookie); /* Deassert nCONFIG */
(*fn->config) (false, true, cookie); /* Deassert nCONFIG */
udelay(2); /* T_cf2st1 < 4us */
/* Wait for nSTATUS to be released (i.e. deasserted) */
@ -192,13 +192,13 @@ static int ACEX1K_ps_load(Altera_desc *desc, const void *buf, size_t bsize)
i = 8;
do {
/* Deassert the clock */
(*fn->clk) (FALSE, TRUE, cookie);
(*fn->clk) (false, true, cookie);
CONFIG_FPGA_DELAY ();
/* Write data */
(*fn->data) ( (val & 0x01), TRUE, cookie);
(*fn->data) ((val & 0x01), true, cookie);
CONFIG_FPGA_DELAY ();
/* Assert the clock */
(*fn->clk) (TRUE, TRUE, cookie);
(*fn->clk) (true, true, cookie);
CONFIG_FPGA_DELAY ();
val >>= 1;
i --;
@ -232,9 +232,9 @@ static int ACEX1K_ps_load(Altera_desc *desc, const void *buf, size_t bsize)
for (i = 0; i < 12; i++) {
CONFIG_FPGA_DELAY ();
(*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */
(*fn->clk) (true, true, cookie); /* Assert the clock pin */
CONFIG_FPGA_DELAY ();
(*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */
(*fn->clk) (false, true, cookie); /* Deassert the clock pin */
}
ret_val = FPGA_SUCCESS;

View File

@ -215,7 +215,7 @@ int altera_info( Altera_desc *desc )
static int altera_validate (Altera_desc * desc, const char *fn)
{
int ret_val = FALSE;
int ret_val = false;
if (desc) {
if ((desc->family > min_altera_type) &&
@ -223,7 +223,7 @@ static int altera_validate (Altera_desc * desc, const char *fn)
if ((desc->iface > min_altera_iface_type) &&
(desc->iface < max_altera_iface_type)) {
if (desc->size) {
ret_val = TRUE;
ret_val = true;
} else {
printf ("%s: NULL part size\n", fn);
}

View File

@ -144,9 +144,9 @@ static int CYC2_ps_load(Altera_desc *desc, const void *buf, size_t bsize)
}
/* Establish the initial state */
(*fn->config) (FALSE, TRUE, cookie); /* De-assert nCONFIG */
(*fn->config) (false, true, cookie); /* De-assert nCONFIG */
udelay(100);
(*fn->config) (TRUE, TRUE, cookie); /* Assert nCONFIG */
(*fn->config) (true, true, cookie); /* Assert nCONFIG */
udelay(2); /* T_cfg > 2us */
@ -164,7 +164,7 @@ static int CYC2_ps_load(Altera_desc *desc, const void *buf, size_t bsize)
/* Get ready for the burn */
CONFIG_FPGA_DELAY ();
ret = (*fn->write) (buf, bsize, TRUE, cookie);
ret = (*fn->write) (buf, bsize, true, cookie);
if (ret) {
puts ("** Write failed.\n");
(*fn->abort) (cookie);

View File

@ -275,7 +275,7 @@ signed char ispVM(void)
static int lattice_validate(Lattice_desc *desc, const char *fn)
{
int ret_val = FALSE;
int ret_val = false;
if (desc) {
if ((desc->family > min_lattice_type) &&
@ -283,7 +283,7 @@ static int lattice_validate(Lattice_desc *desc, const char *fn)
if ((desc->iface > min_lattice_iface_type) &&
(desc->iface < max_lattice_iface_type)) {
if (desc->size) {
ret_val = TRUE;
ret_val = true;
} else {
printf("%s: NULL part size\n", fn);
}

View File

@ -162,11 +162,11 @@ static int Spartan2_sp_load(Xilinx_desc *desc, const void *buf, size_t bsize)
}
/* Establish the initial state */
(*fn->pgm) (TRUE, TRUE, cookie); /* Assert the program, commit */
(*fn->pgm) (true, true, cookie); /* Assert the program, commit */
/* Get ready for the burn */
CONFIG_FPGA_DELAY ();
(*fn->pgm) (FALSE, TRUE, cookie); /* Deassert the program, commit */
(*fn->pgm) (false, true, cookie); /* Deassert the program, commit */
ts = get_timer (0); /* get current time */
/* Now wait for INIT and BUSY to go high */
@ -179,20 +179,20 @@ static int Spartan2_sp_load(Xilinx_desc *desc, const void *buf, size_t bsize)
}
} while ((*fn->init) (cookie) && (*fn->busy) (cookie));
(*fn->wr) (TRUE, TRUE, cookie); /* Assert write, commit */
(*fn->cs) (TRUE, TRUE, cookie); /* Assert chip select, commit */
(*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */
(*fn->wr) (true, true, cookie); /* Assert write, commit */
(*fn->cs) (true, true, cookie); /* Assert chip select, commit */
(*fn->clk) (true, true, cookie); /* Assert the clock pin */
/* Load the data */
while (bytecount < bsize) {
/* XXX - do we check for an Ctrl-C press in here ??? */
/* XXX - Check the error bit? */
(*fn->wdata) (data[bytecount++], TRUE, cookie); /* write the data */
(*fn->wdata) (data[bytecount++], true, cookie); /* write the data */
CONFIG_FPGA_DELAY ();
(*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */
(*fn->clk) (false, true, cookie); /* Deassert the clock pin */
CONFIG_FPGA_DELAY ();
(*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */
(*fn->clk) (true, true, cookie); /* Assert the clock pin */
#ifdef CONFIG_SYS_FPGA_CHECK_BUSY
ts = get_timer (0); /* get current time */
@ -201,9 +201,9 @@ static int Spartan2_sp_load(Xilinx_desc *desc, const void *buf, size_t bsize)
* make sure we aren't busy forever... */
CONFIG_FPGA_DELAY ();
(*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */
(*fn->clk) (false, true, cookie); /* Deassert the clock pin */
CONFIG_FPGA_DELAY ();
(*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */
(*fn->clk) (true, true, cookie); /* Assert the clock pin */
if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */
puts ("** Timeout waiting for BUSY to clear.\n");
@ -220,8 +220,8 @@ static int Spartan2_sp_load(Xilinx_desc *desc, const void *buf, size_t bsize)
}
CONFIG_FPGA_DELAY ();
(*fn->cs) (FALSE, TRUE, cookie); /* Deassert the chip select */
(*fn->wr) (FALSE, TRUE, cookie); /* Deassert the write pin */
(*fn->cs) (false, true, cookie); /* Deassert the chip select */
(*fn->wr) (false, true, cookie); /* Deassert the write pin */
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
putc ('\n'); /* terminate the dotted line */
@ -233,9 +233,9 @@ static int Spartan2_sp_load(Xilinx_desc *desc, const void *buf, size_t bsize)
while ((*fn->done) (cookie) == FPGA_FAIL) {
CONFIG_FPGA_DELAY ();
(*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */
(*fn->clk) (false, true, cookie); /* Deassert the clock pin */
CONFIG_FPGA_DELAY ();
(*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */
(*fn->clk) (true, true, cookie); /* Assert the clock pin */
if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */
puts ("** Timeout waiting for DONE to clear.\n");
@ -277,15 +277,15 @@ static int Spartan2_sp_dump(Xilinx_desc *desc, const void *buf, size_t bsize)
printf ("Starting Dump of FPGA Device %d...\n", cookie);
(*fn->cs) (TRUE, TRUE, cookie); /* Assert chip select, commit */
(*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */
(*fn->cs) (true, true, cookie); /* Assert chip select, commit */
(*fn->clk) (true, true, cookie); /* Assert the clock pin */
/* dump the data */
while (bytecount < bsize) {
/* XXX - do we check for an Ctrl-C press in here ??? */
(*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */
(*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */
(*fn->clk) (false, true, cookie); /* Deassert the clock pin */
(*fn->clk) (true, true, cookie); /* Assert the clock pin */
(*fn->rdata) (&(data[bytecount++]), cookie); /* read the data */
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
if (bytecount % (bsize / 40) == 0)
@ -293,9 +293,9 @@ static int Spartan2_sp_dump(Xilinx_desc *desc, const void *buf, size_t bsize)
#endif
}
(*fn->cs) (FALSE, FALSE, cookie); /* Deassert the chip select */
(*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */
(*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */
(*fn->cs) (false, false, cookie); /* Deassert the chip select */
(*fn->clk) (false, true, cookie); /* Deassert the clock pin */
(*fn->clk) (true, true, cookie); /* Assert the clock pin */
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
putc ('\n'); /* terminate the dotted line */
@ -351,7 +351,7 @@ static int Spartan2_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize)
}
/* Establish the initial state */
(*fn->pgm) (TRUE, TRUE, cookie); /* Assert the program, commit */
(*fn->pgm) (true, true, cookie); /* Assert the program, commit */
/* Wait for INIT state (init low) */
ts = get_timer (0); /* get current time */
@ -365,7 +365,7 @@ static int Spartan2_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize)
/* Get ready for the burn */
CONFIG_FPGA_DELAY ();
(*fn->pgm) (FALSE, TRUE, cookie); /* Deassert the program, commit */
(*fn->pgm) (false, true, cookie); /* Deassert the program, commit */
ts = get_timer (0); /* get current time */
/* Now wait for INIT to go high */
@ -390,13 +390,13 @@ static int Spartan2_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize)
i = 8;
do {
/* Deassert the clock */
(*fn->clk) (FALSE, TRUE, cookie);
(*fn->clk) (false, true, cookie);
CONFIG_FPGA_DELAY ();
/* Write data */
(*fn->wr) ((val & 0x80), TRUE, cookie);
(*fn->wr) ((val & 0x80), true, cookie);
CONFIG_FPGA_DELAY ();
/* Assert the clock */
(*fn->clk) (TRUE, TRUE, cookie);
(*fn->clk) (true, true, cookie);
CONFIG_FPGA_DELAY ();
val <<= 1;
i --;
@ -417,14 +417,14 @@ static int Spartan2_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize)
/* now check for done signal */
ts = get_timer (0); /* get current time */
ret_val = FPGA_SUCCESS;
(*fn->wr) (TRUE, TRUE, cookie);
(*fn->wr) (true, true, cookie);
while (! (*fn->done) (cookie)) {
CONFIG_FPGA_DELAY ();
(*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */
(*fn->clk) (false, true, cookie); /* Deassert the clock pin */
CONFIG_FPGA_DELAY ();
(*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */
(*fn->clk) (true, true, cookie); /* Assert the clock pin */
putc ('*');

View File

@ -166,11 +166,11 @@ static int Spartan3_sp_load(Xilinx_desc *desc, const void *buf, size_t bsize)
}
/* Establish the initial state */
(*fn->pgm) (TRUE, TRUE, cookie); /* Assert the program, commit */
(*fn->pgm) (true, true, cookie); /* Assert the program, commit */
/* Get ready for the burn */
CONFIG_FPGA_DELAY ();
(*fn->pgm) (FALSE, TRUE, cookie); /* Deassert the program, commit */
(*fn->pgm) (false, true, cookie); /* Deassert the program, commit */
ts = get_timer (0); /* get current time */
/* Now wait for INIT and BUSY to go high */
@ -183,20 +183,20 @@ static int Spartan3_sp_load(Xilinx_desc *desc, const void *buf, size_t bsize)
}
} while ((*fn->init) (cookie) && (*fn->busy) (cookie));
(*fn->wr) (TRUE, TRUE, cookie); /* Assert write, commit */
(*fn->cs) (TRUE, TRUE, cookie); /* Assert chip select, commit */
(*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */
(*fn->wr) (true, true, cookie); /* Assert write, commit */
(*fn->cs) (true, true, cookie); /* Assert chip select, commit */
(*fn->clk) (true, true, cookie); /* Assert the clock pin */
/* Load the data */
while (bytecount < bsize) {
/* XXX - do we check for an Ctrl-C press in here ??? */
/* XXX - Check the error bit? */
(*fn->wdata) (data[bytecount++], TRUE, cookie); /* write the data */
(*fn->wdata) (data[bytecount++], true, cookie); /* write the data */
CONFIG_FPGA_DELAY ();
(*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */
(*fn->clk) (false, true, cookie); /* Deassert the clock pin */
CONFIG_FPGA_DELAY ();
(*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */
(*fn->clk) (true, true, cookie); /* Assert the clock pin */
#ifdef CONFIG_SYS_FPGA_CHECK_BUSY
ts = get_timer (0); /* get current time */
@ -205,9 +205,9 @@ static int Spartan3_sp_load(Xilinx_desc *desc, const void *buf, size_t bsize)
* make sure we aren't busy forever... */
CONFIG_FPGA_DELAY ();
(*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */
(*fn->clk) (false, true, cookie); /* Deassert the clock pin */
CONFIG_FPGA_DELAY ();
(*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */
(*fn->clk) (true, true, cookie); /* Assert the clock pin */
if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */
puts ("** Timeout waiting for BUSY to clear.\n");
@ -224,8 +224,8 @@ static int Spartan3_sp_load(Xilinx_desc *desc, const void *buf, size_t bsize)
}
CONFIG_FPGA_DELAY ();
(*fn->cs) (FALSE, TRUE, cookie); /* Deassert the chip select */
(*fn->wr) (FALSE, TRUE, cookie); /* Deassert the write pin */
(*fn->cs) (false, true, cookie); /* Deassert the chip select */
(*fn->wr) (false, true, cookie); /* Deassert the write pin */
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
putc ('\n'); /* terminate the dotted line */
@ -239,9 +239,9 @@ static int Spartan3_sp_load(Xilinx_desc *desc, const void *buf, size_t bsize)
* make sure we aren't busy forever... */
CONFIG_FPGA_DELAY ();
(*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */
(*fn->clk) (false, true, cookie); /* Deassert the clock pin */
CONFIG_FPGA_DELAY ();
(*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */
(*fn->clk) (true, true, cookie); /* Assert the clock pin */
if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */
puts ("** Timeout waiting for DONE to clear.\n");
@ -283,15 +283,15 @@ static int Spartan3_sp_dump(Xilinx_desc *desc, const void *buf, size_t bsize)
printf ("Starting Dump of FPGA Device %d...\n", cookie);
(*fn->cs) (TRUE, TRUE, cookie); /* Assert chip select, commit */
(*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */
(*fn->cs) (true, true, cookie); /* Assert chip select, commit */
(*fn->clk) (true, true, cookie); /* Assert the clock pin */
/* dump the data */
while (bytecount < bsize) {
/* XXX - do we check for an Ctrl-C press in here ??? */
(*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */
(*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */
(*fn->clk) (false, true, cookie); /* Deassert the clock pin */
(*fn->clk) (true, true, cookie); /* Assert the clock pin */
(*fn->rdata) (&(data[bytecount++]), cookie); /* read the data */
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
if (bytecount % (bsize / 40) == 0)
@ -299,9 +299,9 @@ static int Spartan3_sp_dump(Xilinx_desc *desc, const void *buf, size_t bsize)
#endif
}
(*fn->cs) (FALSE, FALSE, cookie); /* Deassert the chip select */
(*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */
(*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */
(*fn->cs) (false, false, cookie); /* Deassert the chip select */
(*fn->clk) (false, true, cookie); /* Deassert the clock pin */
(*fn->clk) (true, true, cookie); /* Assert the clock pin */
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
putc ('\n'); /* terminate the dotted line */
@ -357,7 +357,7 @@ static int Spartan3_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize)
}
/* Establish the initial state */
(*fn->pgm) (TRUE, TRUE, cookie); /* Assert the program, commit */
(*fn->pgm) (true, true, cookie); /* Assert the program, commit */
/* Wait for INIT state (init low) */
ts = get_timer (0); /* get current time */
@ -373,7 +373,7 @@ static int Spartan3_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize)
/* Get ready for the burn */
CONFIG_FPGA_DELAY ();
(*fn->pgm) (FALSE, TRUE, cookie); /* Deassert the program, commit */
(*fn->pgm) (false, true, cookie); /* Deassert the program, commit */
ts = get_timer (0); /* get current time */
/* Now wait for INIT to go high */
@ -389,7 +389,7 @@ static int Spartan3_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize)
/* Load the data */
if(*fn->bwr)
(*fn->bwr) (data, bsize, TRUE, cookie);
(*fn->bwr) (data, bsize, true, cookie);
else {
while (bytecount < bsize) {
@ -405,13 +405,13 @@ static int Spartan3_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize)
i = 8;
do {
/* Deassert the clock */
(*fn->clk) (FALSE, TRUE, cookie);
(*fn->clk) (false, true, cookie);
CONFIG_FPGA_DELAY ();
/* Write data */
(*fn->wr) ((val & 0x80), TRUE, cookie);
(*fn->wr) ((val & 0x80), true, cookie);
CONFIG_FPGA_DELAY ();
/* Assert the clock */
(*fn->clk) (TRUE, TRUE, cookie);
(*fn->clk) (true, true, cookie);
CONFIG_FPGA_DELAY ();
val <<= 1;
i --;
@ -433,16 +433,16 @@ static int Spartan3_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize)
/* now check for done signal */
ts = get_timer (0); /* get current time */
ret_val = FPGA_SUCCESS;
(*fn->wr) (TRUE, TRUE, cookie);
(*fn->wr) (true, true, cookie);
while (! (*fn->done) (cookie)) {
/* XXX - we should have a check in here somewhere to
* make sure we aren't busy forever... */
CONFIG_FPGA_DELAY ();
(*fn->clk) (FALSE, TRUE, cookie); /* Deassert the clock pin */
(*fn->clk) (false, true, cookie); /* Deassert the clock pin */
CONFIG_FPGA_DELAY ();
(*fn->clk) (TRUE, TRUE, cookie); /* Assert the clock pin */
(*fn->clk) (true, true, cookie); /* Assert the clock pin */
putc ('*');

View File

@ -221,7 +221,7 @@ static int Virtex2_ssm_load(Xilinx_desc *desc, const void *buf, size_t bsize)
* There is no maximum value for the pulse width. Check to make
* sure that INIT_B goes low after assertion of PROG_B
*/
(*fn->pgm) (TRUE, TRUE, cookie);
(*fn->pgm) (true, true, cookie);
udelay (10);
ts = get_timer (0);
do {
@ -234,9 +234,9 @@ static int Virtex2_ssm_load(Xilinx_desc *desc, const void *buf, size_t bsize)
}
} while (!(*fn->init) (cookie));
(*fn->pgm) (FALSE, TRUE, cookie);
(*fn->pgm) (false, true, cookie);
CONFIG_FPGA_DELAY ();
(*fn->clk) (TRUE, TRUE, cookie);
(*fn->clk) (true, true, cookie);
/*
* Start a timer and wait for INIT_B to go high
@ -253,8 +253,8 @@ static int Virtex2_ssm_load(Xilinx_desc *desc, const void *buf, size_t bsize)
}
} while ((*fn->init) (cookie) && (*fn->busy) (cookie));
(*fn->wr) (TRUE, TRUE, cookie);
(*fn->cs) (TRUE, TRUE, cookie);
(*fn->wr) (true, true, cookie);
(*fn->cs) (true, true, cookie);
udelay (10000);
@ -286,15 +286,15 @@ static int Virtex2_ssm_load(Xilinx_desc *desc, const void *buf, size_t bsize)
}
#endif
(*fn->wdata) (data[bytecount++], TRUE, cookie);
(*fn->wdata) (data[bytecount++], true, cookie);
CONFIG_FPGA_DELAY ();
/*
* Cycle the clock pin
*/
(*fn->clk) (FALSE, TRUE, cookie);
(*fn->clk) (false, true, cookie);
CONFIG_FPGA_DELAY ();
(*fn->clk) (TRUE, TRUE, cookie);
(*fn->clk) (true, true, cookie);
#ifdef CONFIG_SYS_FPGA_CHECK_BUSY
ts = get_timer (0);
@ -319,8 +319,8 @@ static int Virtex2_ssm_load(Xilinx_desc *desc, const void *buf, size_t bsize)
* Finished writing the data; deassert FPGA CS_B and WRITE_B signals.
*/
CONFIG_FPGA_DELAY ();
(*fn->cs) (FALSE, TRUE, cookie);
(*fn->wr) (FALSE, TRUE, cookie);
(*fn->cs) (false, true, cookie);
(*fn->wr) (false, true, cookie);
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
putc ('\n');
@ -381,8 +381,8 @@ static int Virtex2_ssm_dump(Xilinx_desc *desc, const void *buf, size_t bsize)
printf ("Starting Dump of FPGA Device %d...\n", cookie);
(*fn->cs) (TRUE, TRUE, cookie);
(*fn->clk) (TRUE, TRUE, cookie);
(*fn->cs) (true, true, cookie);
(*fn->clk) (true, true, cookie);
while (bytecount < bsize) {
#ifdef CONFIG_SYS_FPGA_CHECK_CTRLC
@ -394,8 +394,8 @@ static int Virtex2_ssm_dump(Xilinx_desc *desc, const void *buf, size_t bsize)
/*
* Cycle the clock and read the data
*/
(*fn->clk) (FALSE, TRUE, cookie);
(*fn->clk) (TRUE, TRUE, cookie);
(*fn->clk) (false, true, cookie);
(*fn->clk) (true, true, cookie);
(*fn->rdata) (&(data[bytecount++]), cookie);
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
if (bytecount % (bsize / 40) == 0)
@ -406,9 +406,9 @@ static int Virtex2_ssm_dump(Xilinx_desc *desc, const void *buf, size_t bsize)
/*
* Deassert CS_B and cycle the clock to deselect the device.
*/
(*fn->cs) (FALSE, FALSE, cookie);
(*fn->clk) (FALSE, TRUE, cookie);
(*fn->clk) (TRUE, TRUE, cookie);
(*fn->cs) (false, false, cookie);
(*fn->clk) (false, true, cookie);
(*fn->clk) (true, true, cookie);
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
putc ('\n');

View File

@ -242,7 +242,7 @@ int xilinx_info (Xilinx_desc * desc)
static int xilinx_validate (Xilinx_desc * desc, char *fn)
{
int ret_val = FALSE;
int ret_val = false;
if (desc) {
if ((desc->family > min_xilinx_type) &&
@ -250,7 +250,7 @@ static int xilinx_validate (Xilinx_desc * desc, char *fn)
if ((desc->iface > min_xilinx_iface_type) &&
(desc->iface < max_xilinx_iface_type)) {
if (desc->size) {
ret_val = TRUE;
ret_val = true;
} else
printf ("%s: NULL part size\n", fn);
} else

View File

@ -29,8 +29,6 @@
#define DRIVER_NAME "mxc_nand"
typedef enum {false, true} bool;
struct mxc_nand_host {
struct mtd_info mtd;
struct nand_chip *nand;

View File

@ -100,7 +100,7 @@ static int smi_reg_read(const char *devname, u8 phy_addr, u8 phy_reg,
}
/* wait for the SMI register to become available */
if (armdfec_phy_timeout(&regs->smi, SMI_BUSY, FALSE)) {
if (armdfec_phy_timeout(&regs->smi, SMI_BUSY, false)) {
printf("ARMD100 FEC: (%s) PHY busy timeout\n", __func__);
return -1;
}
@ -108,7 +108,7 @@ static int smi_reg_read(const char *devname, u8 phy_addr, u8 phy_reg,
writel((phy_addr << 16) | (phy_reg << 21) | SMI_OP_R, &regs->smi);
/* now wait for the data to be valid */
if (armdfec_phy_timeout(&regs->smi, SMI_R_VALID, TRUE)) {
if (armdfec_phy_timeout(&regs->smi, SMI_R_VALID, true)) {
val = readl(&regs->smi);
printf("ARMD100 FEC: (%s) PHY Read timeout, val=0x%x\n",
__func__, val);
@ -143,7 +143,7 @@ static int smi_reg_write(const char *devname,
}
/* wait for the SMI register to become available */
if (armdfec_phy_timeout(&regs->smi, SMI_BUSY, FALSE)) {
if (armdfec_phy_timeout(&regs->smi, SMI_BUSY, false)) {
printf("ARMD100 FEC: (%s) PHY busy timeout\n", __func__);
return -1;
}

View File

@ -29,13 +29,6 @@
#ifndef __ARMADA100_FEC_H__
#define __ARMADA100_FEC_H__
#ifndef TRUE
#define TRUE 1
#endif
#ifndef FALSE
#define FALSE 0
#endif
#define PORT_NUM 0x0
/* RX & TX descriptor command */

View File

@ -313,14 +313,14 @@ void e1000_standby_eeprom(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
****************************************************************************/
static boolean_t e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw)
static bool e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw)
{
uint32_t eecd = 0;
DEBUGFUNC();
if (hw->mac_type == e1000_ich8lan)
return FALSE;
return false;
if (hw->mac_type == e1000_82573 || hw->mac_type == e1000_82574) {
eecd = E1000_READ_REG(hw, EECD);
@ -330,9 +330,9 @@ static boolean_t e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw)
/* If both bits are set, device is Flash type */
if (eecd == 0x03)
return FALSE;
return false;
}
return TRUE;
return true;
}
/******************************************************************************
@ -421,8 +421,8 @@ static int32_t e1000_init_eeprom_params(struct e1000_hw *hw)
eeprom->opcode_bits = 3;
eeprom->address_bits = 6;
eeprom->delay_usec = 50;
eeprom->use_eerd = FALSE;
eeprom->use_eewr = FALSE;
eeprom->use_eerd = false;
eeprom->use_eewr = false;
break;
case e1000_82540:
case e1000_82545:
@ -439,8 +439,8 @@ static int32_t e1000_init_eeprom_params(struct e1000_hw *hw)
eeprom->word_size = 64;
eeprom->address_bits = 6;
}
eeprom->use_eerd = FALSE;
eeprom->use_eewr = FALSE;
eeprom->use_eerd = false;
eeprom->use_eewr = false;
break;
case e1000_82541:
case e1000_82541_rev_2:
@ -469,8 +469,8 @@ static int32_t e1000_init_eeprom_params(struct e1000_hw *hw)
eeprom->address_bits = 6;
}
}
eeprom->use_eerd = FALSE;
eeprom->use_eewr = FALSE;
eeprom->use_eerd = false;
eeprom->use_eewr = false;
break;
case e1000_82571:
case e1000_82572:
@ -484,8 +484,8 @@ static int32_t e1000_init_eeprom_params(struct e1000_hw *hw)
eeprom->page_size = 8;
eeprom->address_bits = 8;
}
eeprom->use_eerd = FALSE;
eeprom->use_eewr = FALSE;
eeprom->use_eerd = false;
eeprom->use_eewr = false;
break;
case e1000_82573:
case e1000_82574:
@ -499,9 +499,9 @@ static int32_t e1000_init_eeprom_params(struct e1000_hw *hw)
eeprom->page_size = 8;
eeprom->address_bits = 8;
}
eeprom->use_eerd = TRUE;
eeprom->use_eewr = TRUE;
if (e1000_is_onboard_nvm_eeprom(hw) == FALSE) {
eeprom->use_eerd = true;
eeprom->use_eewr = true;
if (e1000_is_onboard_nvm_eeprom(hw) == false) {
eeprom->type = e1000_eeprom_flash;
eeprom->word_size = 2048;
@ -522,8 +522,8 @@ static int32_t e1000_init_eeprom_params(struct e1000_hw *hw)
eeprom->page_size = 8;
eeprom->address_bits = 8;
}
eeprom->use_eerd = TRUE;
eeprom->use_eewr = FALSE;
eeprom->use_eerd = true;
eeprom->use_eewr = false;
break;
/* ich8lan does not support currently. if needed, please
@ -535,8 +535,8 @@ static int32_t e1000_init_eeprom_params(struct e1000_hw *hw)
int32_t i = 0;
eeprom->type = e1000_eeprom_ich8;
eeprom->use_eerd = FALSE;
eeprom->use_eewr = FALSE;
eeprom->use_eerd = false;
eeprom->use_eewr = false;
eeprom->word_size = E1000_SHADOW_RAM_WORDS;
uint32_t flash_size = E1000_READ_ICH_FLASH_REG(hw,
ICH_FLASH_GFPREG);
@ -544,7 +544,7 @@ static int32_t e1000_init_eeprom_params(struct e1000_hw *hw)
* so as to save time for driver init */
if (hw->eeprom_shadow_ram != NULL) {
for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) {
hw->eeprom_shadow_ram[i].modified = FALSE;
hw->eeprom_shadow_ram[i].modified = false;
hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF;
}
}
@ -779,8 +779,8 @@ e1000_read_eeprom(struct e1000_hw *hw, uint16_t offset,
* directly. In this case, we need to acquire the EEPROM so that
* FW or other port software does not interrupt.
*/
if (e1000_is_onboard_nvm_eeprom(hw) == TRUE &&
hw->eeprom.use_eerd == FALSE) {
if (e1000_is_onboard_nvm_eeprom(hw) == true &&
hw->eeprom.use_eerd == false) {
/* Prepare the EEPROM for bit-bang reading */
if (e1000_acquire_eeprom(hw) != E1000_SUCCESS)
@ -788,7 +788,7 @@ e1000_read_eeprom(struct e1000_hw *hw, uint16_t offset,
}
/* Eerd register EEPROM access requires no eeprom aquire/release */
if (eeprom->use_eerd == TRUE)
if (eeprom->use_eerd == true)
return e1000_read_eeprom_eerd(hw, offset, words, data);
/* ich8lan does not support currently. if needed, please
@ -935,7 +935,7 @@ e1000_set_phy_mode(struct e1000_hw *hw)
if (ret_val)
return ret_val;
hw->phy_reset_disable = FALSE;
hw->phy_reset_disable = false;
}
}
@ -1098,17 +1098,17 @@ e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask)
return E1000_SUCCESS;
}
static boolean_t e1000_is_second_port(struct e1000_hw *hw)
static bool e1000_is_second_port(struct e1000_hw *hw)
{
switch (hw->mac_type) {
case e1000_80003es2lan:
case e1000_82546:
case e1000_82571:
if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)
return TRUE;
return true;
/* Fallthrough */
default:
return FALSE;
return false;
}
}
@ -1373,7 +1373,7 @@ e1000_reset_hw(struct e1000_hw *hw)
E1000_WRITE_FLUSH(hw);
/* The tbi_compatibility_on Flag must be cleared when Rctl is cleared. */
hw->tbi_compatibility_on = FALSE;
hw->tbi_compatibility_on = false;
/* Delay to allow any outstanding PCI transactions to complete before
* resetting the device
@ -2098,7 +2098,7 @@ e1000_copper_link_preconfig(struct e1000_hw *hw)
hw->mac_type == e1000_82541 || hw->mac_type == e1000_82547 ||
hw->mac_type == e1000_82541_rev_2
|| hw->mac_type == e1000_82547_rev_2)
hw->phy_reset_disable = FALSE;
hw->phy_reset_disable = false;
return E1000_SUCCESS;
}
@ -2118,7 +2118,7 @@ e1000_copper_link_preconfig(struct e1000_hw *hw)
****************************************************************************/
static int32_t
e1000_set_d3_lplu_state(struct e1000_hw *hw, boolean_t active)
e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active)
{
uint32_t phy_ctrl = 0;
int32_t ret_val;
@ -2253,7 +2253,7 @@ e1000_set_d3_lplu_state(struct e1000_hw *hw, boolean_t active)
****************************************************************************/
static int32_t
e1000_set_d0_lplu_state(struct e1000_hw *hw, boolean_t active)
e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active)
{
uint32_t phy_ctrl = 0;
int32_t ret_val;
@ -2378,7 +2378,7 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw)
/* The NVM settings will configure LPLU in D3 for IGP2 and IGP3 PHYs */
if (hw->phy_type == e1000_phy_igp) {
/* disable lplu d3 during driver init */
ret_val = e1000_set_d3_lplu_state(hw, FALSE);
ret_val = e1000_set_d3_lplu_state(hw, false);
if (ret_val) {
DEBUGOUT("Error Disabling LPLU D3\n");
return ret_val;
@ -2386,7 +2386,7 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw)
}
/* disable lplu d0 during driver init */
ret_val = e1000_set_d0_lplu_state(hw, FALSE);
ret_val = e1000_set_d0_lplu_state(hw, false);
if (ret_val) {
DEBUGOUT("Error Disabling LPLU D0\n");
return ret_val;
@ -2495,9 +2495,9 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw)
/*****************************************************************************
* This function checks the mode of the firmware.
*
* returns - TRUE when the mode is IAMT or FALSE.
* returns - true when the mode is IAMT or false.
****************************************************************************/
boolean_t
bool
e1000_check_mng_mode(struct e1000_hw *hw)
{
uint32_t fwsm;
@ -2508,12 +2508,12 @@ e1000_check_mng_mode(struct e1000_hw *hw)
if (hw->mac_type == e1000_ich8lan) {
if ((fwsm & E1000_FWSM_MODE_MASK) ==
(E1000_MNG_ICH_IAMT_MODE << E1000_FWSM_MODE_SHIFT))
return TRUE;
return true;
} else if ((fwsm & E1000_FWSM_MODE_MASK) ==
(E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT))
return TRUE;
return true;
return FALSE;
return false;
}
static int32_t
@ -2675,7 +2675,7 @@ e1000_copper_link_ggp_setup(struct e1000_hw *hw)
* firmware will have already initialized them. We only initialize
* them if the HW is not in IAMT mode.
*/
if (e1000_check_mng_mode(hw) == FALSE) {
if (e1000_check_mng_mode(hw) == false) {
/* Enable Electrical Idle on the PHY */
phy_data |= GG82563_PMCR_ENABLE_ELECTRICAL_IDLE;
ret_val = e1000_write_phy_reg(hw,
@ -2879,7 +2879,7 @@ e1000_copper_link_autoneg(struct e1000_hw *hw)
}
}
hw->get_link_status = TRUE;
hw->get_link_status = true;
return E1000_SUCCESS;
}
@ -3598,7 +3598,7 @@ e1000_check_for_link(struct eth_device *nic)
}
if (phy_data & MII_SR_LINK_STATUS) {
hw->get_link_status = FALSE;
hw->get_link_status = false;
} else {
/* No link detected */
return -E1000_ERR_NOLINK;
@ -3661,7 +3661,7 @@ e1000_check_for_link(struct eth_device *nic)
rctl = E1000_READ_REG(hw, RCTL);
rctl &= ~E1000_RCTL_SBP;
E1000_WRITE_REG(hw, RCTL, rctl);
hw->tbi_compatibility_on = FALSE;
hw->tbi_compatibility_on = false;
}
} else {
/* If TBI compatibility is was previously off, turn it on. For
@ -3670,7 +3670,7 @@ e1000_check_for_link(struct eth_device *nic)
* will look like CRC errors to to the hardware.
*/
if (!hw->tbi_compatibility_on) {
hw->tbi_compatibility_on = TRUE;
hw->tbi_compatibility_on = true;
rctl = E1000_READ_REG(hw, RCTL);
rctl |= E1000_RCTL_SBP;
E1000_WRITE_REG(hw, RCTL, rctl);
@ -4569,7 +4569,7 @@ e1000_detect_gig_phy(struct e1000_hw *hw)
{
int32_t phy_init_status, ret_val;
uint16_t phy_id_high, phy_id_low;
boolean_t match = FALSE;
bool match = false;
DEBUGFUNC();
@ -4609,11 +4609,11 @@ e1000_detect_gig_phy(struct e1000_hw *hw)
switch (hw->mac_type) {
case e1000_82543:
if (hw->phy_id == M88E1000_E_PHY_ID)
match = TRUE;
match = true;
break;
case e1000_82544:
if (hw->phy_id == M88E1000_I_PHY_ID)
match = TRUE;
match = true;
break;
case e1000_82540:
case e1000_82545:
@ -4621,37 +4621,37 @@ e1000_detect_gig_phy(struct e1000_hw *hw)
case e1000_82546:
case e1000_82546_rev_3:
if (hw->phy_id == M88E1011_I_PHY_ID)
match = TRUE;
match = true;
break;
case e1000_82541:
case e1000_82541_rev_2:
case e1000_82547:
case e1000_82547_rev_2:
if(hw->phy_id == IGP01E1000_I_PHY_ID)
match = TRUE;
match = true;
break;
case e1000_82573:
if (hw->phy_id == M88E1111_I_PHY_ID)
match = TRUE;
match = true;
break;
case e1000_82574:
if (hw->phy_id == BME1000_E_PHY_ID)
match = TRUE;
match = true;
break;
case e1000_80003es2lan:
if (hw->phy_id == GG82563_E_PHY_ID)
match = TRUE;
match = true;
break;
case e1000_ich8lan:
if (hw->phy_id == IGP03E1000_E_PHY_ID)
match = TRUE;
match = true;
if (hw->phy_id == IFE_E_PHY_ID)
match = TRUE;
match = true;
if (hw->phy_id == IFE_PLUS_E_PHY_ID)
match = TRUE;
match = true;
if (hw->phy_id == IFE_C_E_PHY_ID)
match = TRUE;
match = true;
break;
default:
DEBUGOUT("Invalid MAC type %d\n", hw->mac_type);
@ -4682,7 +4682,7 @@ e1000_set_media_type(struct e1000_hw *hw)
if (hw->mac_type != e1000_82543) {
/* tbi_compatibility is only valid on 82543 */
hw->tbi_compatibility_en = FALSE;
hw->tbi_compatibility_en = false;
}
switch (hw->device_id) {
@ -4714,7 +4714,7 @@ e1000_set_media_type(struct e1000_hw *hw)
if (status & E1000_STATUS_TBIMODE) {
hw->media_type = e1000_media_type_fiber;
/* tbi_compatibility not valid on fiber */
hw->tbi_compatibility_en = FALSE;
hw->tbi_compatibility_en = false;
} else {
hw->media_type = e1000_media_type_copper;
}
@ -4788,8 +4788,8 @@ e1000_sw_init(struct eth_device *nic)
hw->media_type = e1000_media_type_fiber;
}
hw->tbi_compatibility_en = TRUE;
hw->wait_autoneg_complete = TRUE;
hw->tbi_compatibility_en = true;
hw->wait_autoneg_complete = true;
if (hw->mac_type < e1000_82543)
hw->report_tx_early = 0;
else
@ -5194,7 +5194,7 @@ e1000_initialize(bd_t * bis)
hw->original_fc = e1000_fc_default;
hw->autoneg_failed = 0;
hw->autoneg = 1;
hw->get_link_status = TRUE;
hw->get_link_status = true;
hw->hw_addr = pci_map_bar(devno, PCI_BASE_ADDRESS_0,
PCI_REGION_MEM);
hw->mac_type = e1000_undefined;

View File

@ -89,11 +89,6 @@ int do_e1000_spi(cmd_tbl_t *cmdtp, struct e1000_hw *hw,
int argc, char * const argv[]);
#endif
typedef enum {
FALSE = 0,
TRUE = 1
} boolean_t;
/* Enumerated types specific to the e1000 hardware */
/* Media Access Controlers */
typedef enum {
@ -340,7 +335,7 @@ struct e1000_phy_stats {
Control and Address */
#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY special
control register */
#define IFE_PHY_RCV_FALSE_CARRIER 0x13 /* 100BaseTx Receive False
#define IFE_PHY_RCV_FALSE_CARRIER 0x13 /* 100BaseTx Receive false
Carrier Counter */
#define IFE_PHY_RCV_DISCONNECT 0x14 /* 100BaseTx Receive Disconnet
Counter */
@ -1040,14 +1035,14 @@ struct e1000_hw_stats {
};
struct e1000_eeprom_info {
e1000_eeprom_type type;
uint16_t word_size;
uint16_t opcode_bits;
uint16_t address_bits;
uint16_t delay_usec;
uint16_t page_size;
boolean_t use_eerd;
boolean_t use_eewr;
e1000_eeprom_type type;
uint16_t word_size;
uint16_t opcode_bits;
uint16_t address_bits;
uint16_t delay_usec;
uint16_t page_size;
bool use_eerd;
bool use_eewr;
};
typedef enum {
@ -1150,20 +1145,20 @@ struct e1000_hw {
#if 0
uint8_t perm_mac_addr[NODE_ADDRESS_SIZE];
#endif
boolean_t disable_polarity_correction;
boolean_t speed_downgraded;
boolean_t get_link_status;
boolean_t tbi_compatibility_en;
boolean_t tbi_compatibility_on;
boolean_t fc_strict_ieee;
boolean_t fc_send_xon;
boolean_t report_tx_early;
boolean_t phy_reset_disable;
boolean_t initialize_hw_bits_disable;
bool disable_polarity_correction;
bool speed_downgraded;
bool get_link_status;
bool tbi_compatibility_en;
bool tbi_compatibility_on;
bool fc_strict_ieee;
bool fc_send_xon;
bool report_tx_early;
bool phy_reset_disable;
bool initialize_hw_bits_disable;
#if 0
boolean_t adaptive_ifs;
boolean_t ifs_params_forced;
boolean_t in_ifs_mode;
bool adaptive_ifs;
bool ifs_params_forced;
bool in_ifs_mode;
#endif
e1000_smart_speed smart_speed;
e1000_dsp_config dsp_config_state;
@ -1860,11 +1855,11 @@ struct e1000_hw {
* Typical use:
* ...
* if (TBI_ACCEPT) {
* accept_frame = TRUE;
* accept_frame = true;
* e1000_tbi_adjust_stats(adapter, MacAddress);
* frame_length--;
* } else {
* accept_frame = FALSE;
* accept_frame = false;
* }
* ...
*/
@ -2080,7 +2075,7 @@ struct e1000_hw {
#define GG82563_PSSR2_ENERGY_DETECT_CHANGED 0x0010 /* 1=Energy Detect Changed */
#define GG82563_PSSR2_DOWNSHIFT_INTERRUPT 0x0020 /* 1=Downshift Detected */
#define GG82563_PSSR2_MDI_CROSSOVER_CHANGE 0x0040 /* 1=Crossover Changed */
#define GG82563_PSSR2_FALSE_CARRIER 0x0100 /* 1=False Carrier */
#define GG82563_PSSR2_FALSE_CARRIER 0x0100 /* 1=false Carrier */
#define GG82563_PSSR2_SYMBOL_ERROR 0x0200 /* 1=Symbol Error */
#define GG82563_PSSR2_LINK_STATUS_CHANGED 0x0400 /* 1=Link Status Changed */
#define GG82563_PSSR2_AUTO_NEG_COMPLETED 0x0800 /* 1=Auto-Neg Completed */

View File

@ -17,7 +17,7 @@
* never return an error.
*/
static int e1000_spi_xfer(struct e1000_hw *hw, unsigned int bitlen,
const void *dout_mem, void *din_mem, boolean_t intr)
const void *dout_mem, void *din_mem, bool intr)
{
const uint8_t *dout = dout_mem;
uint8_t *din = din_mem;
@ -145,7 +145,7 @@ int spi_xfer(struct spi_slave *spi, unsigned int bitlen,
if (flags & SPI_XFER_BEGIN)
e1000_standby_eeprom(hw);
ret = e1000_spi_xfer(hw, bitlen, dout_mem, din_mem, TRUE);
ret = e1000_spi_xfer(hw, bitlen, dout_mem, din_mem, true);
if (flags & SPI_XFER_END)
e1000_standby_eeprom(hw);
@ -169,7 +169,7 @@ int spi_xfer(struct spi_slave *spi, unsigned int bitlen,
#define SPI_EEPROM_STATUS_BUSY 0x01
#define SPI_EEPROM_STATUS_WREN 0x02
static int e1000_spi_eeprom_enable_wr(struct e1000_hw *hw, boolean_t intr)
static int e1000_spi_eeprom_enable_wr(struct e1000_hw *hw, bool intr)
{
u8 op[] = { SPI_EEPROM_ENABLE_WR };
e1000_standby_eeprom(hw);
@ -181,7 +181,7 @@ static int e1000_spi_eeprom_enable_wr(struct e1000_hw *hw, boolean_t intr)
* of the EEPROM commands at this time.
*/
#if 0
static int e1000_spi_eeprom_disable_wr(struct e1000_hw *hw, boolean_t intr)
static int e1000_spi_eeprom_disable_wr(struct e1000_hw *hw, bool intr)
{
u8 op[] = { SPI_EEPROM_DISABLE_WR };
e1000_standby_eeprom(hw);
@ -189,7 +189,7 @@ static int e1000_spi_eeprom_disable_wr(struct e1000_hw *hw, boolean_t intr)
}
static int e1000_spi_eeprom_write_status(struct e1000_hw *hw,
u8 status, boolean_t intr)
u8 status, bool intr)
{
u8 op[] = { SPI_EEPROM_WRITE_STATUS, status };
e1000_standby_eeprom(hw);
@ -197,7 +197,7 @@ static int e1000_spi_eeprom_write_status(struct e1000_hw *hw,
}
#endif
static int e1000_spi_eeprom_read_status(struct e1000_hw *hw, boolean_t intr)
static int e1000_spi_eeprom_read_status(struct e1000_hw *hw, bool intr)
{
u8 op[] = { SPI_EEPROM_READ_STATUS, 0 };
e1000_standby_eeprom(hw);
@ -207,7 +207,7 @@ static int e1000_spi_eeprom_read_status(struct e1000_hw *hw, boolean_t intr)
}
static int e1000_spi_eeprom_write_page(struct e1000_hw *hw,
const void *data, u16 off, u16 len, boolean_t intr)
const void *data, u16 off, u16 len, bool intr)
{
u8 op[] = {
SPI_EEPROM_WRITE_PAGE,
@ -225,7 +225,7 @@ static int e1000_spi_eeprom_write_page(struct e1000_hw *hw,
}
static int e1000_spi_eeprom_read_page(struct e1000_hw *hw,
void *data, u16 off, u16 len, boolean_t intr)
void *data, u16 off, u16 len, bool intr)
{
u8 op[] = {
SPI_EEPROM_READ_PAGE,
@ -242,7 +242,7 @@ static int e1000_spi_eeprom_read_page(struct e1000_hw *hw,
return 0;
}
static int e1000_spi_eeprom_poll_ready(struct e1000_hw *hw, boolean_t intr)
static int e1000_spi_eeprom_poll_ready(struct e1000_hw *hw, bool intr)
{
int status;
while ((status = e1000_spi_eeprom_read_status(hw, intr)) >= 0) {
@ -253,7 +253,7 @@ static int e1000_spi_eeprom_poll_ready(struct e1000_hw *hw, boolean_t intr)
}
static int e1000_spi_eeprom_dump(struct e1000_hw *hw,
void *data, u16 off, unsigned int len, boolean_t intr)
void *data, u16 off, unsigned int len, bool intr)
{
/* Interruptibly wait for the EEPROM to be ready */
if (e1000_spi_eeprom_poll_ready(hw, intr))
@ -282,7 +282,7 @@ static int e1000_spi_eeprom_dump(struct e1000_hw *hw,
}
static int e1000_spi_eeprom_program(struct e1000_hw *hw,
const void *data, u16 off, u16 len, boolean_t intr)
const void *data, u16 off, u16 len, bool intr)
{
/* Program each page in sequence */
while (len) {
@ -362,7 +362,7 @@ static int do_e1000_spi_show(cmd_tbl_t *cmdtp, struct e1000_hw *hw,
free(buffer);
return 1;
}
err = e1000_spi_eeprom_dump(hw, buffer, offset, length, TRUE);
err = e1000_spi_eeprom_dump(hw, buffer, offset, length, true);
e1000_release_eeprom(hw);
if (err) {
E1000_ERR(hw->nic, "Interrupted!\n");
@ -421,7 +421,7 @@ static int do_e1000_spi_dump(cmd_tbl_t *cmdtp, struct e1000_hw *hw,
}
/* Perform the programming operation */
if (e1000_spi_eeprom_dump(hw, dest, offset, length, TRUE) < 0) {
if (e1000_spi_eeprom_dump(hw, dest, offset, length, true) < 0) {
E1000_ERR(hw->nic, "Interrupted!\n");
e1000_release_eeprom(hw);
return 1;
@ -456,7 +456,7 @@ static int do_e1000_spi_program(cmd_tbl_t *cmdtp, struct e1000_hw *hw,
}
/* Perform the programming operation */
if (e1000_spi_eeprom_program(hw, source, offset, length, TRUE) < 0) {
if (e1000_spi_eeprom_program(hw, source, offset, length, true) < 0) {
E1000_ERR(hw->nic, "Interrupted!\n");
e1000_release_eeprom(hw);
return 1;
@ -472,7 +472,7 @@ static int do_e1000_spi_checksum(cmd_tbl_t *cmdtp, struct e1000_hw *hw,
{
uint16_t i, length, checksum = 0, checksum_reg;
uint16_t *buffer;
boolean_t upd;
bool upd;
if (argc == 0)
upd = 0;
@ -498,7 +498,7 @@ static int do_e1000_spi_checksum(cmd_tbl_t *cmdtp, struct e1000_hw *hw,
}
/* Read the EEPROM */
if (e1000_spi_eeprom_dump(hw, buffer, 0, length, TRUE) < 0) {
if (e1000_spi_eeprom_dump(hw, buffer, 0, length, true) < 0) {
E1000_ERR(hw->nic, "Interrupted!\n");
e1000_release_eeprom(hw);
return 1;
@ -533,7 +533,7 @@ static int do_e1000_spi_checksum(cmd_tbl_t *cmdtp, struct e1000_hw *hw,
printf("%s: Reprogramming the EEPROM checksum...\n", hw->nic->name);
buffer[i] = cpu_to_le16(checksum);
if (e1000_spi_eeprom_program(hw, &buffer[i], i * sizeof(uint16_t),
sizeof(uint16_t), TRUE)) {
sizeof(uint16_t), true)) {
E1000_ERR(hw->nic, "Interrupted!\n");
e1000_release_eeprom(hw);
return 1;

View File

@ -79,10 +79,6 @@ are GPL, so this is, of course, GPL.
#ifndef __NE2000_BASE_H__
#define __NE2000_BASE_H__
#define bool int
#define false 0
#define true 1
/*
* Debugging details
*

View File

@ -82,7 +82,7 @@ extern PUBLIC IxOsalMutex ixEthAccControlInterfaceMutex;
* @ingroup IxEthAccPri
*
*/
BOOL ixEthAccServiceInit = FALSE;
BOOL ixEthAccServiceInit = false;
/* global filtering bit mask */
PUBLIC UINT32 ixEthAccNewSrcMask;
@ -168,7 +168,7 @@ PUBLIC IxEthAccStatus ixEthAccInit()
}
/* initialiasation is complete */
ixEthAccServiceInit = TRUE;
ixEthAccServiceInit = true;
return IX_ETH_ACC_SUCCESS;
@ -200,11 +200,11 @@ PUBLIC void ixEthAccUnload(void)
/* set all ports as uninitialized */
for (portId = 0; portId < IX_ETH_ACC_NUMBER_OF_PORTS; portId++)
{
ixEthAccPortData[portId].portInitialized = FALSE;
ixEthAccPortData[portId].portInitialized = false;
}
/* uninitialize the service */
ixEthAccServiceInit = FALSE;
ixEthAccServiceInit = false;
}
}
@ -248,7 +248,7 @@ PUBLIC IxEthAccStatus ixEthAccPortInit( IxEthAccPortId portId)
* Set the port init flag.
*/
ixEthAccPortData[portId].portInitialized = TRUE;
ixEthAccPortData[portId].portInitialized = true;
#ifdef CONFIG_IXP425_COMPONENT_ETHDB
/* init learning/filtering database structures for this port */

View File

@ -102,7 +102,7 @@ IxEthAccQregInfo ixEthAccQmgrRxDefaultTemplate =
(IxQMgrCallbackId) 0, /**< Callback tag */
IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */
IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */
TRUE, /**< Enable Q notification at startup */
true, /**< Enable Q notification at startup */
IX_ETH_ACC_RX_FRAME_ETH_Q_SOURCE,/**< Q Condition to drive callback */
IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */
IX_QMGR_Q_WM_LEVEL1, /**< Q High water mark - needed by NPE */
@ -122,7 +122,7 @@ IxEthAccQregInfo ixEthAccQmgrRxSmallTemplate =
(IxQMgrCallbackId) 0, /**< Callback tag */
IX_QMGR_Q_SIZE64, /**< Allocate Smaller Q */
IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */
TRUE, /**< Enable Q notification at startup */
true, /**< Enable Q notification at startup */
IX_ETH_ACC_RX_FRAME_ETH_Q_SOURCE,/**< Q Condition to drive callback */
IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */
IX_QMGR_Q_WM_LEVEL1, /**< Q High water mark - needed by NPE */
@ -144,7 +144,7 @@ IxEthAccQregInfo ixEthAccQmgrStaticInfo[]=
(IxQMgrCallbackId) IX_ETH_PORT_1,
IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */
IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */
FALSE, /**< Disable Q notification at startup */
false, /**< Disable Q notification at startup */
IX_ETH_ACC_RX_FREE_BUFF_ENET0_Q_SOURCE, /**< Q Condition to drive callback */
IX_QMGR_Q_WM_LEVEL0, /***< Q Low water mark */
IX_QMGR_Q_WM_LEVEL64, /**< Q High water mark */
@ -157,7 +157,7 @@ IxEthAccQregInfo ixEthAccQmgrStaticInfo[]=
(IxQMgrCallbackId) IX_ETH_PORT_2,
IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */
IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */
FALSE, /**< Disable Q notification at startup */
false, /**< Disable Q notification at startup */
IX_ETH_ACC_RX_FREE_BUFF_ENET1_Q_SOURCE, /**< Q Condition to drive callback */
IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */
IX_QMGR_Q_WM_LEVEL64, /**< Q High water mark */
@ -170,7 +170,7 @@ IxEthAccQregInfo ixEthAccQmgrStaticInfo[]=
(IxQMgrCallbackId) IX_ETH_PORT_3,
IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */
IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */
FALSE, /**< Disable Q notification at startup */
false, /**< Disable Q notification at startup */
IX_ETH_ACC_RX_FREE_BUFF_ENET2_Q_SOURCE, /**< Q Condition to drive callback */
IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */
IX_QMGR_Q_WM_LEVEL64, /**< Q High water mark */
@ -183,7 +183,7 @@ IxEthAccQregInfo ixEthAccQmgrStaticInfo[]=
(IxQMgrCallbackId) IX_ETH_PORT_1,
IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */
IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */
FALSE, /**< Disable Q notification at startup */
false, /**< Disable Q notification at startup */
IX_ETH_ACC_TX_FRAME_ENET0_Q_SOURCE, /**< Q Condition to drive callback */
IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */
IX_QMGR_Q_WM_LEVEL64, /**< Q High water mark */
@ -196,7 +196,7 @@ IxEthAccQregInfo ixEthAccQmgrStaticInfo[]=
(IxQMgrCallbackId) IX_ETH_PORT_2,
IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */
IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */
FALSE, /**< Disable Q notification at startup */
false, /**< Disable Q notification at startup */
IX_ETH_ACC_TX_FRAME_ENET1_Q_SOURCE, /**< Q Condition to drive callback */
IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */
IX_QMGR_Q_WM_LEVEL64, /**< Q High water mark */
@ -209,7 +209,7 @@ IxEthAccQregInfo ixEthAccQmgrStaticInfo[]=
(IxQMgrCallbackId) IX_ETH_PORT_3,
IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */
IX_QMGR_Q_ENTRY_SIZE1, /** Queue Entry Sizes - all Q entries are single ord entries */
FALSE, /** Disable Q notification at startup */
false, /** Disable Q notification at startup */
IX_ETH_ACC_TX_FRAME_ENET2_Q_SOURCE, /** Q Condition to drive callback */
IX_QMGR_Q_WM_LEVEL0, /* No queues use almost empty */
IX_QMGR_Q_WM_LEVEL64, /** Q High water mark - needed used */
@ -222,7 +222,7 @@ IxEthAccQregInfo ixEthAccQmgrStaticInfo[]=
(IxQMgrCallbackId) 0,
IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */
IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */
TRUE, /**< Enable Q notification at startup */
true, /**< Enable Q notification at startup */
IX_ETH_ACC_TX_FRAME_DONE_ETH_Q_SOURCE, /**< Q Condition to drive callback */
IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */
IX_QMGR_Q_WM_LEVEL2, /**< Q High water mark - needed by NPE */
@ -449,7 +449,7 @@ ixEthAccQMgrQueueSetup(IxEthAccQregInfo *qInfoDes)
/*
* Set notification condition for Q
*/
if ( qInfoDes->qNotificationEnableAtStartup == TRUE )
if (qInfoDes->qNotificationEnableAtStartup == true)
{
if ( ixQMgrNotificationEnable(qInfoDes->qId,
qInfoDes->qConditionSource)
@ -513,7 +513,7 @@ IxEthAccStatus ixEthAccQMgrQueuesConfig(void)
IxEthDBProperty ixEthDBTrafficClass = IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY;
IxEthDBPropertyType ixEthDBPropertyType = IX_ETH_DB_INTEGER_PROPERTY;
UINT32 ixEthDBParameter = 0;
BOOL completelySorted = FALSE;
BOOL completelySorted = false;
/* Fill the corspondance between ports and queues
* This defines the mapping from port to queue Ids.
@ -706,7 +706,7 @@ IxEthAccStatus ixEthAccQMgrQueuesConfig(void)
do
{
sortIterations++;
completelySorted = TRUE;
completelySorted = true;
for (rxQueue = 0;
rxQueue < rxQueueCount - sortIterations;
rxQueue++)
@ -732,7 +732,7 @@ IxEthAccStatus ixEthAccQMgrQueuesConfig(void)
rxQueues[rxQueue+1].npeId = npeId;
rxQueues[rxQueue+1].qId = qId;
rxQueues[rxQueue+1].trafficClass = trafficClass;
completelySorted = FALSE;
completelySorted = false;
}
}
}

View File

@ -948,7 +948,7 @@ IxEthAccStatus ixEthAccPortRxCallbackRegister(IxEthAccPortId portId,
for (port = 0; port < IX_ETH_ACC_NUMBER_OF_PORTS; port++)
{
if ((ixEthAccMacState[port].portDisableState == ACTIVE)
&& (ixEthAccPortData[port].ixEthAccRxData.rxMultiBufferCallbackInUse == TRUE))
&& (ixEthAccPortData[port].ixEthAccRxData.rxMultiBufferCallbackInUse == true))
{
/* one of the active ports has a different rx callback type.
* Changing the callback type when the port is enabled
@ -977,7 +977,7 @@ IxEthAccStatus ixEthAccPortRxCallbackRegister(IxEthAccPortId portId,
return (IX_ETH_ACC_INVALID_ARG);
}
ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackInUse = FALSE;
ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackInUse = false;
return (IX_ETH_ACC_SUCCESS);
}
@ -1025,7 +1025,7 @@ IxEthAccStatus ixEthAccPortMultiBufferRxCallbackRegister(
for (port = 0; port < IX_ETH_ACC_NUMBER_OF_PORTS; port++)
{
if ((ixEthAccMacState[port].portDisableState == ACTIVE)
&& (ixEthAccPortData[port].ixEthAccRxData.rxMultiBufferCallbackInUse == FALSE))
&& (ixEthAccPortData[port].ixEthAccRxData.rxMultiBufferCallbackInUse == false))
{
/* one of the active ports has a different rx callback type.
* Changing the callback type when the port is enabled
@ -1055,7 +1055,7 @@ IxEthAccStatus ixEthAccPortMultiBufferRxCallbackRegister(
return (IX_ETH_ACC_INVALID_ARG);
}
ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackInUse = TRUE;
ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackInUse = true;
return (IX_ETH_ACC_SUCCESS);
}
@ -1456,7 +1456,7 @@ ixEthRxFrameProcess(IxEthAccPortId portId, IX_OSAL_MBUF *mbufPtr)
IX_ETH_ACC_FATAL_LOG(
"ixEthRxFrameProcess: Illegal port: %u\n",
(UINT32)portId, 0, 0, 0, 0, 0);
return FALSE;
return false;
}
#endif
@ -1468,7 +1468,7 @@ ixEthRxFrameProcess(IxEthAccPortId portId, IX_OSAL_MBUF *mbufPtr)
if ((flags & (IX_ETHACC_NE_FILTERMASK | IX_ETHACC_NE_NEWSRCMASK)) == 0)
{
/* "best case" scenario : nothing special to do for this frame */
return TRUE;
return true;
}
#ifdef CONFIG_IXP425_COMPONENT_ETHDB
@ -1540,10 +1540,10 @@ ixEthRxFrameProcess(IxEthAccPortId portId, IX_OSAL_MBUF *mbufPtr)
RX_STATS_INC(portId, rxFiltered);
/* indicate that frame should not be subjected to further processing */
return FALSE;
return false;
}
return TRUE;
return true;
}

View File

@ -304,7 +304,7 @@ ixEthAccPortEnablePriv(IxEthAccPortId portId)
/* set the global state */
ixEthAccMacState[portId].portDisableState = ACTIVE;
ixEthAccMacState[portId].enabled = TRUE;
ixEthAccMacState[portId].enabled = true;
/* rewrite the setup (including mac filtering) depending
* on current options
@ -515,7 +515,7 @@ ixEthAccPortDisableRxCallback (UINT32 cbTag,
IxEthAccPortId portId = (IxEthAccPortId)cbTag;
/* call the portDisable receive callback */
(ixEthAccPortDisableRxTable[portId])(portId, mBufPtr, FALSE);
(ixEthAccPortDisableRxTable[portId])(portId, mBufPtr, false);
}
PRIVATE void
@ -527,7 +527,7 @@ ixEthAccPortDisableMultiBufferRxCallback (UINT32 cbTag,
while (*mBufPtr)
{
/* call the portDisable receive callback with one buffer at a time */
(ixEthAccPortDisableRxTable[portId])(portId, *mBufPtr++, TRUE);
(ixEthAccPortDisableRxTable[portId])(portId, *mBufPtr++, true);
}
}
@ -820,7 +820,7 @@ ixEthAccPortDisablePriv(IxEthAccPortId portId)
}
/* disable MAC Tx and Rx services */
ixEthAccMacState[portId].enabled = FALSE;
ixEthAccMacState[portId].enabled = false;
ixEthAccMacStateUpdate(portId);
/* restore the Rx and TxDone callbacks (within a critical section) */
@ -869,14 +869,14 @@ ixEthAccPortEnabledQueryPriv(IxEthAccPortId portId, BOOL *enabled)
IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot enable port.\n",(INT32)portId,0,0,0,0,0);
/* Since Eth NPE is not available, port must be disabled */
*enabled = FALSE ;
*enabled = false ;
return IX_ETH_ACC_SUCCESS ;
}
if (!IX_ETH_IS_PORT_INITIALIZED(portId))
{
/* Since Eth NPE is not available, port must be disabled */
*enabled = FALSE ;
*enabled = false ;
return (IX_ETH_ACC_PORT_UNINITIALIZED);
}
@ -1259,7 +1259,7 @@ ixEthAccPortPromiscuousModeClearPriv(IxEthAccPortId portId)
IX_ETH_ACC_MAC_RX_CNTRL1,
regval | IX_ETH_ACC_RX_CNTRL1_ADDR_FLTR_EN);
ixEthAccMacState[portId].promiscuous = FALSE;
ixEthAccMacState[portId].promiscuous = false;
ixEthAccMulticastAddressSet(portId);
@ -1297,7 +1297,7 @@ ixEthAccPortPromiscuousModeSetPriv(IxEthAccPortId portId)
IX_ETH_ACC_MAC_RX_CNTRL1,
regval | IX_ETH_ACC_RX_CNTRL1_ADDR_FLTR_EN);
ixEthAccMacState[portId].promiscuous = TRUE;
ixEthAccMacState[portId].promiscuous = true;
ixEthAccMulticastAddressSet(portId);
@ -1361,7 +1361,7 @@ ixEthAccPortUnicastMacAddressSetPriv (IxEthAccPortId portId,
IX_ETH_ACC_MAC_UNI_ADDR_1 + i*sizeof(UINT32),
macAddr->macAddress[i]);
}
ixEthAccMacState[portId].initDone = TRUE;
ixEthAccMacState[portId].initDone = true;
return IX_ETH_ACC_SUCCESS;
}
@ -1552,7 +1552,7 @@ ixEthAccPortMulticastAddressJoinAllPriv (IxEthAccPortId portId)
IX_IEEE803_MAC_ADDRESS_SIZE);
ixEthAccMacState[portId].mcastAddrIndex = 1;
ixEthAccMacState[portId].joinAll = TRUE;
ixEthAccMacState[portId].joinAll = true;
ixEthAccMulticastAddressSet(portId);
@ -1599,7 +1599,7 @@ ixEthAccPortMulticastAddressLeavePriv (IxEthAccPortId portId,
{
if(ixEthAccMacEqual(macAddr, &mcastMacAddr))
{
ixEthAccMacState[portId].joinAll = FALSE;
ixEthAccMacState[portId].joinAll = false;
}
/*Decrement the index into the multicast address table
for the current port*/
@ -1643,7 +1643,7 @@ ixEthAccPortMulticastAddressLeaveAllPriv (IxEthAccPortId portId)
}
ixEthAccMacState[portId].mcastAddrIndex = 0;
ixEthAccMacState[portId].joinAll = FALSE;
ixEthAccMacState[portId].joinAll = false;
ixEthAccMulticastAddressSet(portId);
@ -1770,7 +1770,7 @@ ixEthAccPortDuplexModeSetPriv (IxEthAccPortId portId,
REG_WRITE(ixEthAccMacBase[portId],
IX_ETH_ACC_MAC_RX_CNTRL1,
rxregval | IX_ETH_ACC_RX_CNTRL1_PAUSE_EN);
ixEthAccMacState[portId].fullDuplex = TRUE;
ixEthAccMacState[portId].fullDuplex = true;
}
else if (mode == IX_ETH_ACC_HALF_DUPLEX)
@ -1786,7 +1786,7 @@ ixEthAccPortDuplexModeSetPriv (IxEthAccPortId portId,
IX_ETH_ACC_MAC_RX_CNTRL1,
rxregval & ~IX_ETH_ACC_RX_CNTRL1_PAUSE_EN);
ixEthAccMacState[portId].fullDuplex = FALSE;
ixEthAccMacState[portId].fullDuplex = false;
}
else
{
@ -1876,7 +1876,7 @@ ixEthAccPortTxFrameAppendPaddingEnablePriv (IxEthAccPortId portId)
regval |
IX_ETH_ACC_TX_CNTRL1_PAD_EN);
ixEthAccMacState[portId].txPADAppend = TRUE;
ixEthAccMacState[portId].txPADAppend = true;
return IX_ETH_ACC_SUCCESS;
}
@ -1908,7 +1908,7 @@ ixEthAccPortTxFrameAppendPaddingDisablePriv (IxEthAccPortId portId)
IX_ETH_ACC_MAC_TX_CNTRL1,
regval & ~IX_ETH_ACC_TX_CNTRL1_PAD_EN);
ixEthAccMacState[portId].txPADAppend = FALSE;
ixEthAccMacState[portId].txPADAppend = false;
return IX_ETH_ACC_SUCCESS;
}
@ -1941,7 +1941,7 @@ ixEthAccPortTxFrameAppendFCSEnablePriv (IxEthAccPortId portId)
IX_ETH_ACC_MAC_TX_CNTRL1,
regval | IX_ETH_ACC_TX_CNTRL1_FCS_EN);
ixEthAccMacState[portId].txFCSAppend = TRUE;
ixEthAccMacState[portId].txFCSAppend = true;
return IX_ETH_ACC_SUCCESS;
}
@ -1973,7 +1973,7 @@ ixEthAccPortTxFrameAppendFCSDisablePriv (IxEthAccPortId portId)
IX_ETH_ACC_MAC_TX_CNTRL1,
regval & ~IX_ETH_ACC_TX_CNTRL1_FCS_EN);
ixEthAccMacState[portId].txFCSAppend = FALSE;
ixEthAccMacState[portId].txFCSAppend = false;
return IX_ETH_ACC_SUCCESS;
}
@ -2004,7 +2004,7 @@ ixEthAccPortRxFrameAppendFCSEnablePriv (IxEthAccPortId portId)
IX_ETH_ACC_MAC_RX_CNTRL1,
regval | IX_ETH_ACC_RX_CNTRL1_CRC_EN);
ixEthAccMacState[portId].rxFCSAppend = TRUE;
ixEthAccMacState[portId].rxFCSAppend = true;
return IX_ETH_ACC_SUCCESS;
}
@ -2035,7 +2035,7 @@ ixEthAccPortRxFrameAppendFCSDisablePriv (IxEthAccPortId portId)
IX_ETH_ACC_MAC_RX_CNTRL1,
regval & ~IX_ETH_ACC_RX_CNTRL1_CRC_EN);
ixEthAccMacState[portId].rxFCSAppend = FALSE;
ixEthAccMacState[portId].rxFCSAppend = false;
return IX_ETH_ACC_SUCCESS;
}
@ -2327,17 +2327,17 @@ ixEthAccMacInit(IxEthAccPortId portId)
return IX_ETH_ACC_SUCCESS ;
}
if(ixEthAccMacState[portId].macInitialised == FALSE)
if(ixEthAccMacState[portId].macInitialised == false)
{
ixEthAccMacState[portId].fullDuplex = TRUE;
ixEthAccMacState[portId].rxFCSAppend = TRUE;
ixEthAccMacState[portId].txFCSAppend = TRUE;
ixEthAccMacState[portId].txPADAppend = TRUE;
ixEthAccMacState[portId].enabled = FALSE;
ixEthAccMacState[portId].promiscuous = TRUE;
ixEthAccMacState[portId].joinAll = FALSE;
ixEthAccMacState[portId].initDone = FALSE;
ixEthAccMacState[portId].macInitialised = TRUE;
ixEthAccMacState[portId].fullDuplex = true;
ixEthAccMacState[portId].rxFCSAppend = true;
ixEthAccMacState[portId].txFCSAppend = true;
ixEthAccMacState[portId].txPADAppend = true;
ixEthAccMacState[portId].enabled = false;
ixEthAccMacState[portId].promiscuous = true;
ixEthAccMacState[portId].joinAll = false;
ixEthAccMacState[portId].initDone = false;
ixEthAccMacState[portId].macInitialised = true;
/* initialize MIB stats mutexes */
ixOsalMutexInit(&ixEthAccMacState[portId].ackMIBStatsLock);
@ -2417,7 +2417,7 @@ ixEthAccMacStateUpdate(IxEthAccPortId portId)
{
UINT32 regval;
if ( ixEthAccMacState[portId].enabled == FALSE )
if ( ixEthAccMacState[portId].enabled == false )
{
/* Just disable both the transmitter and reciver in the MAC. */
REG_READ(ixEthAccMacBase[portId],
@ -2480,7 +2480,7 @@ ixEthAccMacStateUpdate(IxEthAccPortId portId)
ixEthAccPortPromiscuousModeClearPriv(portId);
}
if ( ixEthAccMacState[portId].enabled == TRUE )
if ( ixEthAccMacState[portId].enabled == true )
{
/* Enable both the transmitter and reciver in the MAC. */
REG_READ(ixEthAccMacBase[portId],
@ -2509,10 +2509,10 @@ ixEthAccMacEqual(IxEthAccMacAddr *macAddr1,
{
if(macAddr1->macAddress[i] != macAddr2->macAddress[i])
{
return FALSE;
return false;
}
}
return TRUE;
return true;
}
PRIVATE void
@ -2554,7 +2554,7 @@ ixEthAccMulticastAddressSet(IxEthAccPortId portId)
* are set in the result
*/
if (ixEthAccMacState[portId].promiscuous == TRUE)
if (ixEthAccMacState[portId].promiscuous == true)
{
/* Promiscuous Mode is set, and filtering
* allow all packets, and enable the mcast and
@ -2569,7 +2569,7 @@ ixEthAccMulticastAddressSet(IxEthAccPortId portId)
}
else
{
if(ixEthAccMacState[portId].joinAll == TRUE)
if(ixEthAccMacState[portId].joinAll == true)
{
/* Join all is set. The mask and address are
* the multicast settings.

View File

@ -60,7 +60,7 @@ IxEthDBStatus ixEthDBFilteringStaticEntryProvision(IxEthDBPortId portID, IxEthDB
IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_LEARNING);
return ixEthDBTriggerAddPortUpdate(macAddr, portID, TRUE);
return ixEthDBTriggerAddPortUpdate(macAddr, portID, true);
}
IX_ETH_DB_PUBLIC
@ -74,7 +74,7 @@ IxEthDBStatus ixEthDBFilteringDynamicEntryProvision(IxEthDBPortId portID, IxEthD
IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_LEARNING);
return ixEthDBTriggerAddPortUpdate(macAddr, portID, FALSE);
return ixEthDBTriggerAddPortUpdate(macAddr, portID, false);
}
IX_ETH_DB_PUBLIC
@ -102,7 +102,7 @@ void ixEthDBDatabaseMaintenance()
{
HashIterator iterator;
UINT32 portIndex;
BOOL agingRequired = FALSE;
BOOL agingRequired = false;
/* ports who will have deleted records and therefore will need updating */
IxEthDBPortMap triggerPorts;
@ -120,7 +120,7 @@ void ixEthDBDatabaseMaintenance()
{
if (ixEthDBPortInfo[portIndex].agingEnabled && ixEthDBPortInfo[portIndex].enabled)
{
agingRequired = TRUE;
agingRequired = true;
}
}
@ -152,9 +152,9 @@ void ixEthDBDatabaseMaintenance()
}
else
{
ixEthDBPortInfo[portIndex].agingEnabled = FALSE;
ixEthDBPortInfo[portIndex].updateMethod.updateEnabled = FALSE;
ixEthDBPortInfo[portIndex].updateMethod.userControlled = TRUE;
ixEthDBPortInfo[portIndex].agingEnabled = false;
ixEthDBPortInfo[portIndex].updateMethod.updateEnabled = false;
ixEthDBPortInfo[portIndex].updateMethod.userControlled = true;
ixOsalLog(IX_OSAL_LOG_LVL_FATAL,
IX_OSAL_LOG_DEV_STDOUT,
@ -173,7 +173,7 @@ void ixEthDBDatabaseMaintenance()
{
MacDescriptor *descriptor = (MacDescriptor *) iterator.node->data;
UINT32 *age = NULL;
BOOL staticEntry = TRUE;
BOOL staticEntry = true;
if (descriptor->type == IX_ETH_DB_FILTERING_RECORD)
{
@ -187,10 +187,10 @@ void ixEthDBDatabaseMaintenance()
}
else
{
staticEntry = TRUE;
staticEntry = true;
}
if (ixEthDBPortInfo[descriptor->portID].agingEnabled && (staticEntry == FALSE))
if (ixEthDBPortInfo[descriptor->portID].agingEnabled && (staticEntry == false))
{
/* manually increment the age if the port has no such capability */
if ((ixEthDBPortDefinitions[descriptor->portID].capabilities & IX_ETH_ENTRY_AGING) == 0)
@ -341,7 +341,7 @@ IxEthDBStatus ixEthDBPortAgingDisable(IxEthDBPortId portID)
IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_LEARNING);
ixEthDBPortInfo[portID].agingEnabled = FALSE;
ixEthDBPortInfo[portID].agingEnabled = false;
return IX_ETH_DB_SUCCESS;
}
@ -355,7 +355,7 @@ IxEthDBStatus ixEthDBPortAgingEnable(IxEthDBPortId portID)
IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_LEARNING);
ixEthDBPortInfo[portID].agingEnabled = TRUE;
ixEthDBPortInfo[portID].agingEnabled = true;
return IX_ETH_DB_SUCCESS;
}
@ -442,7 +442,7 @@ IxEthDBStatus ixEthDBPortUpdateEnableSet(IxEthDBPortId portID, BOOL enableUpdate
IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FILTERING);
ixEthDBPortInfo[portID].updateMethod.updateEnabled = enableUpdate;
ixEthDBPortInfo[portID].updateMethod.userControlled = TRUE;
ixEthDBPortInfo[portID].updateMethod.userControlled = true;
return IX_ETH_DB_SUCCESS;
}

View File

@ -128,18 +128,18 @@ void ixEthDBPortInit(IxEthDBPortId portID)
SET_DEPENDENCY_MAP(portInfo->dependencyPortMap, portID);
/* default values */
portInfo->agingEnabled = FALSE;
portInfo->enabled = FALSE;
portInfo->macAddressUploaded = FALSE;
portInfo->agingEnabled = false;
portInfo->enabled = false;
portInfo->macAddressUploaded = false;
portInfo->maxRxFrameSize = IX_ETHDB_DEFAULT_FRAME_SIZE;
portInfo->maxTxFrameSize = IX_ETHDB_DEFAULT_FRAME_SIZE;
/* default update control values */
portInfo->updateMethod.searchTree = NULL;
portInfo->updateMethod.searchTreePendingWrite = FALSE;
portInfo->updateMethod.treeInitialized = FALSE;
portInfo->updateMethod.updateEnabled = FALSE;
portInfo->updateMethod.userControlled = FALSE;
portInfo->updateMethod.searchTreePendingWrite = false;
portInfo->updateMethod.treeInitialized = false;
portInfo->updateMethod.updateEnabled = false;
portInfo->updateMethod.userControlled = false;
/* default WiFi parameters */
memset(portInfo->bbsid, 0, sizeof (portInfo->bbsid));
@ -153,9 +153,9 @@ void ixEthDBPortInit(IxEthDBPortId portID)
}
/* initialize state save */
ixEthDBPortState[portID].saved = FALSE;
ixEthDBPortState[portID].saved = false;
portInfo->initialized = TRUE;
portInfo->initialized = true;
}
/**
@ -190,7 +190,7 @@ IxEthDBStatus ixEthDBPortEnable(IxEthDBPortId portID)
SET_DEPENDENCY_MAP(triggerPorts, portID);
/* mark as enabled */
portInfo->enabled = TRUE;
portInfo->enabled = true;
/* Operation stops here when Ethernet Learning is not enabled */
if(IX_FEATURE_CTRL_SWCONFIG_DISABLED ==
@ -214,7 +214,7 @@ IxEthDBStatus ixEthDBPortEnable(IxEthDBPortId portID)
if (!portInfo->updateMethod.userControlled
&& ((portInfo->featureCapability & IX_ETH_DB_FILTERING) != 0))
{
portInfo->updateMethod.updateEnabled = TRUE;
portInfo->updateMethod.updateEnabled = true;
}
/* if this is first time initialization then we already have
@ -227,7 +227,7 @@ IxEthDBStatus ixEthDBPortEnable(IxEthDBPortId portID)
ixEthDBUpdatePortLearningTrees(triggerPorts);
/* mark tree as being initialized */
portInfo->updateMethod.treeInitialized = TRUE;
portInfo->updateMethod.treeInitialized = true;
}
}
@ -262,7 +262,7 @@ IxEthDBStatus ixEthDBPortEnable(IxEthDBPortId portID)
ixEthDBFilteringPortMaximumTxFrameSizeSet(portID, ixEthDBPortState[portID].maxTxFrameSize);
/* discard previous save */
ixEthDBPortState[portID].saved = FALSE;
ixEthDBPortState[portID].saved = false;
}
IX_ETH_DB_SUPPORT_TRACE("DB: (Support) Enabling succeeded for port %d\n", portID);
@ -321,7 +321,7 @@ IxEthDBStatus ixEthDBPortDisable(IxEthDBPortId portID)
memcpy(ixEthDBPortState[portID].transmitTaggingInfo, portInfo->transmitTaggingInfo, sizeof (IxEthDBVlanSet));
memcpy(ixEthDBPortState[portID].priorityTable, portInfo->priorityTable, sizeof (IxEthDBPriorityTable));
ixEthDBPortState[portID].saved = TRUE;
ixEthDBPortState[portID].saved = true;
/* now turn off all EthDB filtering features on the port */
@ -330,7 +330,7 @@ IxEthDBStatus ixEthDBPortDisable(IxEthDBPortId portID)
if ((portInfo->featureCapability & IX_ETH_DB_VLAN_QOS) != 0)
{
ixEthDBPortVlanMembershipRangeAdd((IxEthDBPortId) portID, 0, IX_ETH_DB_802_1Q_MAX_VLAN_ID);
ixEthDBEgressVlanRangeTaggingEnabledSet((IxEthDBPortId) portID, 0, IX_ETH_DB_802_1Q_MAX_VLAN_ID, FALSE);
ixEthDBEgressVlanRangeTaggingEnabledSet((IxEthDBPortId) portID, 0, IX_ETH_DB_802_1Q_MAX_VLAN_ID, false);
ixEthDBAcceptableFrameTypeSet((IxEthDBPortId) portID, IX_ETH_DB_ACCEPT_ALL_FRAMES);
ixEthDBIngressVlanTaggingEnabledSet((IxEthDBPortId) portID, IX_ETH_DB_PASS_THROUGH);
@ -342,7 +342,7 @@ IxEthDBStatus ixEthDBPortDisable(IxEthDBPortId portID)
/* STP */
if ((portInfo->featureCapability & IX_ETH_DB_SPANNING_TREE_PROTOCOL) != 0)
{
ixEthDBSpanningTreeBlockingStateSet((IxEthDBPortId) portID, FALSE);
ixEthDBSpanningTreeBlockingStateSet((IxEthDBPortId) portID, false);
}
/* Firewall */
@ -350,7 +350,7 @@ IxEthDBStatus ixEthDBPortDisable(IxEthDBPortId portID)
{
ixEthDBFirewallModeSet((IxEthDBPortId) portID, IX_ETH_DB_FIREWALL_BLACK_LIST);
ixEthDBFirewallTableDownload((IxEthDBPortId) portID);
ixEthDBFirewallInvalidAddressFilterEnable((IxEthDBPortId) portID, FALSE);
ixEthDBFirewallInvalidAddressFilterEnable((IxEthDBPortId) portID, false);
}
/* Frame size filter */
@ -413,18 +413,18 @@ IxEthDBStatus ixEthDBPortDisable(IxEthDBPortId portID)
}
/* mark as disabled */
portInfo->enabled = FALSE;
portInfo->enabled = false;
/* disable updates unless the user has specifically altered the default behavior */
if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE)
{
if (!portInfo->updateMethod.userControlled)
{
portInfo->updateMethod.updateEnabled = FALSE;
portInfo->updateMethod.updateEnabled = false;
}
/* make sure we re-initialize the NPE learning tree when the port is re-enabled */
portInfo->updateMethod.treeInitialized = FALSE;
portInfo->updateMethod.treeInitialized = false;
}
ixEthDBUpdateUnlock();
@ -668,7 +668,7 @@ IxEthDBStatus ixEthDBPortAddressSet(IxEthDBPortId portID, IxEthDBMacAddr *macAdd
if (result == IX_SUCCESS)
{
ixEthDBPortInfo[portID].macAddressUploaded = TRUE;
ixEthDBPortInfo[portID].macAddressUploaded = true;
}
return result;

View File

@ -51,7 +51,7 @@ IX_ETH_DB_PUBLIC BOOL ixEthDBPortUpdateRequired[IX_ETH_DB_MAX_RECORD_TYPE_INDEX
IX_ETH_DB_PUBLIC UINT32 ixEthDBKeyType[IX_ETH_DB_MAX_RECORD_TYPE_INDEX + 1];
/* private initialization flag */
IX_ETH_DB_PRIVATE BOOL ethDBInitializationComplete = FALSE;
IX_ETH_DB_PRIVATE BOOL ethDBInitializationComplete = false;
/**
* @brief initializes EthDB
@ -124,7 +124,7 @@ IxEthDBStatus ixEthDBInit(void)
ixEthDBFeatureCapabilityScan();
}
ethDBInitializationComplete = TRUE;
ethDBInitializationComplete = true;
return result;
}
@ -179,7 +179,7 @@ IxEthDBStatus ixEthDBUnload(void)
ixOsalMutexDestroy(&ixEthDBPortInfo[portIndex].npeAckLock);
}
ixEthDBPortInfo[portIndex].initialized = FALSE;
ixEthDBPortInfo[portIndex].initialized = false;
}
/* shutdown event processor */
@ -188,7 +188,7 @@ IxEthDBStatus ixEthDBUnload(void)
/* deallocate NPE update zones */
ixEthDBNPEUpdateAreasUnload();
ethDBInitializationComplete = FALSE;
ethDBInitializationComplete = false;
return IX_ETH_DB_SUCCESS;
}

View File

@ -61,8 +61,8 @@ IX_ETH_DB_PRIVATE PortEventQueue eventQueue;
IX_ETH_DB_PRIVATE IxOsalMutex eventQueueLock;
IX_ETH_DB_PRIVATE IxOsalMutex portUpdateLock;
IX_ETH_DB_PRIVATE BOOL ixEthDBLearningShutdown = FALSE;
IX_ETH_DB_PRIVATE BOOL ixEthDBEventProcessorRunning = FALSE;
IX_ETH_DB_PRIVATE BOOL ixEthDBLearningShutdown = false;
IX_ETH_DB_PRIVATE BOOL ixEthDBEventProcessorRunning = false;
/* imported data */
extern HashTable dbHashtable;
@ -143,7 +143,7 @@ IxEthDBStatus ixEthDBStartLearningFunction(void)
return IX_ETH_DB_FAIL;
}
ixEthDBLearningShutdown = FALSE;
ixEthDBLearningShutdown = false;
/* create processor loop thread */
if (ixOsalThreadCreate(&eventProcessorThread, &threadAttr, ixEthDBEventProcessorLoop, NULL) != IX_SUCCESS)
@ -173,7 +173,7 @@ IxEthDBStatus ixEthDBStartLearningFunction(void)
IX_ETH_DB_PUBLIC
IxEthDBStatus ixEthDBStopLearningFunction(void)
{
ixEthDBLearningShutdown = TRUE;
ixEthDBLearningShutdown = true;
/* wake up event processing loop to actually process the shutdown event */
ixOsalSemaphorePost(&eventQueueSemaphore);
@ -253,13 +253,13 @@ void ixEthDBEventProcessorLoop(void *unused1)
IxEthDBPortMap triggerPorts;
IxEthDBPortId portIndex;
ixEthDBEventProcessorRunning = TRUE;
ixEthDBEventProcessorRunning = true;
IX_ETH_DB_EVENTS_TRACE("DB: (Events) Event processor loop was started\n");
while (!ixEthDBLearningShutdown)
{
BOOL keepProcessing = TRUE;
BOOL keepProcessing = true;
UINT32 processedEvents = 0;
IX_ETH_DB_EVENTS_VERBOSE_TRACE("DB: (Events) Waiting for new learning event...\n");
@ -302,7 +302,7 @@ void ixEthDBEventProcessorLoop(void *unused1)
if (processedEvents > EVENT_PROCESSING_LIMIT /* maximum burst reached? */
|| ixOsalSemaphoreTryWait(&eventQueueSemaphore) != IX_SUCCESS) /* or empty queue? */
{
keepProcessing = FALSE;
keepProcessing = false;
}
}
@ -313,10 +313,10 @@ void ixEthDBEventProcessorLoop(void *unused1)
/* turn off automatic updates */
for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++)
{
ixEthDBPortInfo[portIndex].updateMethod.updateEnabled = FALSE;
ixEthDBPortInfo[portIndex].updateMethod.updateEnabled = false;
}
ixEthDBEventProcessorRunning = FALSE;
ixEthDBEventProcessorRunning = false;
}
/**
@ -381,7 +381,7 @@ void ixEthDBProcessEvent(PortEvent *local_event, IxEthDBPortMap triggerPorts)
*
* @param macAddr MAC address of the new record
* @param portID port ID of the new record
* @param staticEntry TRUE if record is static, FALSE if dynamic
* @param staticEntry true if record is static, false if dynamic
*
* @return IX_ETH_DB_SUCCESS if the event creation was
* successfull or IX_ETH_DB_BUSY if the event queue is full
@ -430,7 +430,7 @@ IxEthDBStatus ixEthDBTriggerRemovePortUpdate(IxEthDBMacAddr *macAddr, IxEthDBPor
{
if (ixEthDBPeek(macAddr, IX_ETH_DB_ALL_FILTERING_RECORDS) != IX_ETH_DB_NO_SUCH_ADDR)
{
return ixEthDBTriggerPortUpdate(IX_ETH_DB_REMOVE_FILTERING_RECORD, macAddr, portID, FALSE);
return ixEthDBTriggerPortUpdate(IX_ETH_DB_REMOVE_FILTERING_RECORD, macAddr, portID, false);
}
else
{

View File

@ -169,7 +169,7 @@ void ixEthDBFeatureCapabilityScan(void)
/* enable port, VLAN and Firewall feature bits to initialize QoS/VLAN/Firewall configuration */
portInfo->featureStatus |= IX_ETH_DB_VLAN_QOS;
portInfo->featureStatus |= IX_ETH_DB_FIREWALL;
portInfo->enabled = TRUE;
portInfo->enabled = true;
#define CONFIG_WITH_VLAN /* test-only: VLAN support not included to save space!!! */
#ifdef CONFIG_WITH_VLAN /* test-only: VLAN support not included to save space!!! */
@ -195,7 +195,7 @@ void ixEthDBFeatureCapabilityScan(void)
ixEthDBPortVlanMembershipRangeRemove(portIndex, 0, IX_ETH_DB_802_1Q_MAX_VLAN_ID);
/* clear TTI table - no VLAN tagged frames will be transmitted */
ixEthDBEgressVlanRangeTaggingEnabledSet(portIndex, 0, 4094, FALSE);
ixEthDBEgressVlanRangeTaggingEnabledSet(portIndex, 0, 4094, false);
/* set membership on 0, otherwise no Tx or Rx is working */
ixEthDBPortVlanMembershipAdd(portIndex, 0);
@ -221,12 +221,12 @@ void ixEthDBFeatureCapabilityScan(void)
#endif
/* by default we turn off invalid source MAC address filtering */
ixEthDBFirewallInvalidAddressFilterEnable(portIndex, FALSE);
ixEthDBFirewallInvalidAddressFilterEnable(portIndex, false);
/* disable port, VLAN, Firewall feature bits */
portInfo->featureStatus &= ~IX_ETH_DB_VLAN_QOS;
portInfo->featureStatus &= ~IX_ETH_DB_FIREWALL;
portInfo->enabled = FALSE;
portInfo->enabled = false;
/* enable filtering by default if present */
if ((portInfo->featureCapability & IX_ETH_DB_FILTERING) != 0)
@ -271,7 +271,7 @@ IxEthDBStatus ixEthDBFeatureCapabilityGet(IxEthDBPortId portID, IxEthDBFeature *
*
* @param portID ID of the port
* @param feature feature to enable or disable
* @param enabled TRUE to enable the selected feature or FALSE to disable it
* @param enabled true to enable the selected feature or false to disable it
*
* Note that this function is documented in the main component
* header file, IxEthDB.h.
@ -333,7 +333,7 @@ IxEthDBStatus ixEthDBFeatureEnable(IxEthDBPortId portID, IxEthDBFeature feature,
}
/* force port enabled */
portInfo->enabled = TRUE;
portInfo->enabled = true;
if (enable)
{
@ -399,7 +399,7 @@ IxEthDBStatus ixEthDBFeatureEnable(IxEthDBPortId portID, IxEthDBFeature feature,
/* enable TPID port extraction */
if (status == IX_ETH_DB_SUCCESS)
{
status = ixEthDBVlanPortExtractionEnable(portID, TRUE);
status = ixEthDBVlanPortExtractionEnable(portID, true);
}
}
else if (feature == IX_ETH_DB_FIREWALL)
@ -414,7 +414,7 @@ IxEthDBStatus ixEthDBFeatureEnable(IxEthDBPortId portID, IxEthDBFeature feature,
if (status == IX_ETH_DB_SUCCESS)
{
status = ixEthDBFirewallInvalidAddressFilterEnable(portID, FALSE);
status = ixEthDBFirewallInvalidAddressFilterEnable(portID, false);
}
}
}
@ -445,7 +445,7 @@ IxEthDBStatus ixEthDBFeatureEnable(IxEthDBPortId portID, IxEthDBFeature feature,
if (status == IX_ETH_DB_SUCCESS)
{
status = ixEthDBFirewallInvalidAddressFilterEnable(portID, FALSE);
status = ixEthDBFirewallInvalidAddressFilterEnable(portID, false);
}
if (status == IX_ETH_DB_SUCCESS)
@ -515,7 +515,7 @@ IxEthDBStatus ixEthDBFeatureEnable(IxEthDBPortId portID, IxEthDBFeature feature,
/* disable TPID port extraction */
if (status == IX_ETH_DB_SUCCESS)
{
status = ixEthDBVlanPortExtractionEnable(portID, FALSE);
status = ixEthDBVlanPortExtractionEnable(portID, false);
}
}
#endif
@ -538,9 +538,9 @@ IxEthDBStatus ixEthDBFeatureEnable(IxEthDBPortId portID, IxEthDBFeature feature,
*
* @param portID port ID
* @param present location to store a boolean value indicating
* if the feature is present (TRUE) or not (FALSE)
* if the feature is present (true) or not (false)
* @param enabled location to store a booleam value indicating
* if the feature is present (TRUE) or not (FALSE)
* if the feature is present (true) or not (false)
*
* Note that this function is documented in the main component
* header file, IxEthDB.h.

View File

@ -72,7 +72,7 @@ IxEthDBStatus ixEthDBFirewallUpdate(IxEthDBPortId portID, void *address, UINT32
UINT32 mode = 0;
PortInfo *portInfo = &ixEthDBPortInfo[portID];
mode = (portInfo->srcAddressFilterEnabled != FALSE) << 1 | (portInfo->firewallMode == IX_ETH_DB_FIREWALL_WHITE_LIST);
mode = (portInfo->srcAddressFilterEnabled != false) << 1 | (portInfo->firewallMode == IX_ETH_DB_FIREWALL_WHITE_LIST);
FILL_SETFIREWALLMODE_MSG(message,
IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(portID),
@ -123,8 +123,8 @@ IxEthDBStatus ixEthDBFirewallModeSet(IxEthDBPortId portID, IxEthDBFirewallMode m
* @brief enables or disables the invalid source MAC address filter
*
* @param portID ID of the port
* @param enable TRUE to enable invalid source MAC address filtering
* or FALSE to disable it
* @param enable true to enable invalid source MAC address filtering
* or false to disable it
*
* The invalid source MAC address filter will discard, when enabled,
* frames whose source MAC address is a multicast or the broadcast MAC

View File

@ -105,8 +105,8 @@ UINT32 ixEthDBKeyXORHash(void *key)
* collisions, i.e. descriptors with different mac addresses and the same
* hash value, where this function is used to differentiate entries.
*
* @retval TRUE if the entry matches the reference key (equal addresses)
* @retval FALSE if the entry does not match the reference key
* @retval true if the entry matches the reference key (equal addresses)
* @retval false if the entry does not match the reference key
*
* @internal
*/

View File

@ -203,7 +203,7 @@ void ixEthDBNPESyncScan(IxEthDBPortId portID, void *eltBaseAddress, UINT32 eltSi
/* debug */
IX_ETH_DB_NPE_VERBOSE_TRACE("DB: (NPEAdaptor) checking node at offset %d...\n", eltEntryOffset / ELT_ENTRY_SIZE);
if (IX_EDB_NPE_NODE_VALID(eltNodeAddress) != TRUE)
if (IX_EDB_NPE_NODE_VALID(eltNodeAddress) != true)
{
IX_ETH_DB_NPE_VERBOSE_TRACE("\t... node is empty\n");
}

View File

@ -60,7 +60,7 @@ extern HashTable dbHashtable;
*
* @param typeArray array indexed on record types, each
* element indicating whether the record type requires an
* automatic update (TRUE) or not (FALSE)
* automatic update (true) or not (false)
*
* Automatic updates are done for registered record types
* upon adding, updating (that is, updating the record portID)
@ -70,7 +70,7 @@ extern HashTable dbHashtable;
*
* It is assumed that the typeArray parameter is allocated large
* enough to hold all the user defined types. Also, the type
* array should be initialized to FALSE as this function only
* array should be initialized to false as this function only
* caters for types which do require automatic updates.
*
* Note that this function should be called by the component
@ -84,8 +84,8 @@ extern HashTable dbHashtable;
IX_ETH_DB_PUBLIC
UINT32 ixEthDBUpdateTypeRegister(BOOL *typeArray)
{
typeArray[IX_ETH_DB_FILTERING_RECORD] = TRUE;
typeArray[IX_ETH_DB_FILTERING_VLAN_RECORD] = TRUE;
typeArray[IX_ETH_DB_FILTERING_RECORD] = true;
typeArray[IX_ETH_DB_FILTERING_VLAN_RECORD] = true;
return 2;
}
@ -174,7 +174,7 @@ void ixEthDBCreateTrees(IxEthDBPortMap updatePorts)
{
UINT32 portIndex;
BOOL result;
BOOL portsLeft = TRUE;
BOOL portsLeft = true;
while (portsLeft)
{
@ -305,11 +305,11 @@ void ixEthDBCreateTrees(IxEthDBPortMap updatePorts)
}
/* mark tree as valid */
port->updateMethod.searchTreePendingWrite = TRUE;
port->updateMethod.searchTreePendingWrite = true;
}
else
{
portsLeft = FALSE;
portsLeft = false;
IX_ETH_DB_UPDATE_TRACE("DB: (Update) No trees to create this round\n");
}
@ -374,7 +374,7 @@ IxEthDBStatus ixEthDBNPEUpdateHandler(IxEthDBPortId portID, IxEthDBRecordType ty
/* forget last used search tree */
port->updateMethod.searchTree = NULL;
port->updateMethod.searchTreePendingWrite = FALSE;
port->updateMethod.searchTreePendingWrite = false;
/* dependending on the update type we do different things */
if (type == IX_ETH_DB_FILTERING_RECORD || type == IX_ETH_DB_WIFI_RECORD)
@ -393,9 +393,9 @@ IxEthDBStatus ixEthDBNPEUpdateHandler(IxEthDBPortId portID, IxEthDBRecordType ty
}
else
{
ixEthDBPortInfo[portID].agingEnabled = FALSE;
ixEthDBPortInfo[portID].updateMethod.updateEnabled = FALSE;
ixEthDBPortInfo[portID].updateMethod.userControlled = TRUE;
ixEthDBPortInfo[portID].agingEnabled = false;
ixEthDBPortInfo[portID].updateMethod.updateEnabled = false;
ixEthDBPortInfo[portID].updateMethod.userControlled = true;
ERROR_LOG("EthDB: (PortUpdate) disabling aging and updates on port %d (assumed dead)\n", portID);

View File

@ -62,7 +62,7 @@ IX_ETH_DB_PUBLIC
IxEthDBStatus ixEthDBDependencyPortMapShow(IxEthDBPortId portID, IxEthDBPortMap map)
{
UINT32 portIndex;
BOOL mapSelf = TRUE, mapNone = TRUE, firstPort = TRUE;
BOOL mapSelf = true, mapNone = true, firstPort = true;
/* dependency port maps */
printf("Dependency port map: ");
@ -72,22 +72,22 @@ IxEthDBStatus ixEthDBDependencyPortMapShow(IxEthDBPortId portID, IxEthDBPortMap
{
if (IS_PORT_INCLUDED(portIndex, map))
{
mapNone = FALSE;
mapNone = false;
if (portIndex != portID)
{
mapSelf = FALSE;
mapSelf = false;
}
printf("%s%d", firstPort ? "{" : ", ", portIndex);
firstPort = FALSE;
firstPort = false;
}
}
if (mapNone)
{
mapSelf = FALSE;
mapSelf = false;
}
printf("%s (%s)\n", firstPort ? "" : "}", mapSelf ? "self" : mapNone ? "none" : "group");

View File

@ -50,7 +50,7 @@ extern HashTable dbHashtable;
* @param untypedReference record to match against
* @param untypedEntry record to match
*
* @return TRUE if the match is successful or FALSE otherwise
* @return true if the match is successful or false otherwise
*
* @internal
*/
@ -61,7 +61,7 @@ BOOL ixEthDBAddressRecordMatch(void *untypedReference, void *untypedEntry)
MacDescriptor *reference = (MacDescriptor *) untypedReference;
/* check accepted record types */
if ((entry->type & reference->type) == 0) return FALSE;
if ((entry->type & reference->type) == 0) return false;
return (ixEthDBAddressCompare((UINT8 *) entry->macAddress, (UINT8 *) reference->macAddress) == 0);
}
@ -73,7 +73,7 @@ BOOL ixEthDBAddressRecordMatch(void *untypedReference, void *untypedEntry)
* @param untypedReference record to match against
* @param untypedEntry record to match
*
* @return TRUE if the match is successful or FALSE otherwise
* @return true if the match is successful or false otherwise
*
* @internal
*/
@ -84,7 +84,7 @@ BOOL ixEthDBVlanRecordMatch(void *untypedReference, void *untypedEntry)
MacDescriptor *reference = (MacDescriptor *) untypedReference;
/* check accepted record types */
if ((entry->type & reference->type) == 0) return FALSE;
if ((entry->type & reference->type) == 0) return false;
return (IX_ETH_DB_GET_VLAN_ID(entry->recordData.filteringVlanData.ieee802_1qTag) ==
IX_ETH_DB_GET_VLAN_ID(reference->recordData.filteringVlanData.ieee802_1qTag)) &&
@ -98,7 +98,7 @@ BOOL ixEthDBVlanRecordMatch(void *untypedReference, void *untypedEntry)
* @param untypedReference record to match against
* @param untypedEntry record to match
*
* @return TRUE if the match is successful or FALSE otherwise
* @return true if the match is successful or false otherwise
*
* @internal
*/
@ -109,7 +109,7 @@ BOOL ixEthDBPortRecordMatch(void *untypedReference, void *untypedEntry)
MacDescriptor *reference = (MacDescriptor *) untypedReference;
/* check accepted record types */
if ((entry->type & reference->type) == 0) return FALSE;
if ((entry->type & reference->type) == 0) return false;
return (entry->portID == reference->portID) &&
(ixEthDBAddressCompare(entry->macAddress, reference->macAddress) == 0);
@ -125,7 +125,7 @@ BOOL ixEthDBPortRecordMatch(void *untypedReference, void *untypedEntry)
* array on invalid types. Calling it will display an
* error message, indicating an error in the component logic.
*
* @return FALSE
* @return false
*
* @internal
*/
@ -137,7 +137,7 @@ BOOL ixEthDBNullMatch(void *reference, void *entry)
ixOsalLog(IX_OSAL_LOG_LVL_WARNING, IX_OSAL_LOG_DEV_STDOUT, "DB: (Search) The NullMatch function was called, wrong key type?\n", 0, 0, 0, 0, 0, 0);
return FALSE;
return false;
}
/**

View File

@ -49,7 +49,7 @@
* @brief sets the STP blocking state of a port
*
* @param portID ID of the port
* @param blocked TRUE to block the port or FALSE to unblock it
* @param blocked true to block the port or false to unblock it
*
* Note that this function is documented in the main component
* header file, IxEthDB.h.

View File

@ -94,13 +94,13 @@ BOOL ixEthDBCheckSingleBitValue(UINT32 value)
while (value != 0)
{
if (value == 1) return TRUE;
else if ((value & 1) == 1) return FALSE;
if (value == 1) return true;
else if ((value & 1) == 1) return false;
value >>= 1;
}
return FALSE;
return false;
#endif
}

View File

@ -642,7 +642,7 @@ IxEthDBStatus ixEthDBPortVlanMembershipGet(IxEthDBPortId portID, IxEthDBVlanSet
*
* @param portID ID of the port
* @param vlanID VLAN ID to enable or disable Egress tagging on
* @param enabled TRUE to enable and FALSE to disable tagging
* @param enabled true to enable and false to disable tagging
*
* Note that this function is documented in the main component
* header file, IxEthDB.h.
@ -670,7 +670,7 @@ IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledSet(IxEthDBPortId portID, IxEt
* @param portID ID of the port
* @param vlanID VLAN ID to retrieve the tagging status for
* @param enabled location to store the tagging status
* (TRUE - tagging enabled, FALSE - tagging disabled)
* (true - tagging enabled, false - tagging disabled)
*
* Note that this function is documented in the main component
* header file, IxEthDB.h.
@ -702,7 +702,7 @@ IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledGet(IxEthDBPortId portID, IxEt
* @param portID ID of the port
* @param vlanIDMin start of VLAN range
* @param vlanIDMax end of VLAN range
* @param enabled TRUE to enable or FALSE to disable VLAN tagging
* @param enabled true to enable or false to disable VLAN tagging
*
* Note that this function is documented in the main component
* header file, IxEthDB.h.
@ -1151,7 +1151,7 @@ IxEthDBStatus ixEthDBPriorityMappingClassGet(IxEthDBPortId portID, IxEthDBPriori
* from the VLAN TPID field
*
* @param portID ID of the port
* @param enable TRUE to enable or FALSE to disable
* @param enable true to enable or false to disable
*
* Note that this function is documented in the main component
* header file, IxEthDB.h.

View File

@ -65,7 +65,7 @@ PRIVATE UINT32 ixEthMiiPhyId[IXP425_ETH_ACC_MII_MAX_ADDR];
* Scan for PHYs on the MII bus. This function returns
* an array of booleans, one for each PHY address.
* If a PHY is found at a particular address, the
* corresponding entry in the array is set to TRUE.
* corresponding entry in the array is set to true.
*
*/
@ -89,7 +89,7 @@ ixEthMiiPhyScan(BOOL phyPresent[], UINT32 maxPhyCount)
i<IXP425_ETH_ACC_MII_MAX_ADDR;
i++)
{
phyPresent[i] = FALSE;
phyPresent[i] = false;
}
/* iterate through the PHY addresses */
@ -119,7 +119,7 @@ ixEthMiiPhyScan(BOOL phyPresent[], UINT32 maxPhyCount)
)
{
/* supported phy */
phyPresent[i] = TRUE;
phyPresent[i] = true;
} /* end of if(ixEthMiiPhyId) */
else
{
@ -131,7 +131,7 @@ ixEthMiiPhyScan(BOOL phyPresent[], UINT32 maxPhyCount)
"ixEthMiiPhyScan : unexpected Mii PHY ID %8.8x\n",
ixEthMiiPhyId[i], 2, 3, 4, 5, 6);
ixEthMiiPhyId[i] = IX_ETH_MII_UNKNOWN_PHY_ID;
phyPresent[i] = TRUE;
phyPresent[i] = true;
}
}
}
@ -347,10 +347,10 @@ ixEthMiiLinkStatus(UINT32 phyAddr,
return IX_FAIL;
}
*linkUp = FALSE;
*speed100 = FALSE;
*fullDuplex = FALSE;
*autoneg = FALSE;
*linkUp = false;
*speed100 = false;
*fullDuplex = false;
*autoneg = false;
if ((phyAddr < IXP425_ETH_ACC_MII_MAX_ADDR) &&
(ixEthMiiPhyId[phyAddr] != IX_ETH_MII_INVALID_PHY_ID))
@ -406,20 +406,20 @@ ixEthMiiLinkStatus(UINT32 phyAddr,
if ((regval & IX_ETH_MII_SR_TX_FULL_DPX) != 0)
{
/* 100 Base X full dplx */
*speed100 = TRUE;
*fullDuplex = TRUE;
*speed100 = true;
*fullDuplex = true;
return IX_SUCCESS;
}
if ((regval & IX_ETH_MII_SR_TX_HALF_DPX) != 0)
{
/* 100 Base X half dplx */
*speed100 = TRUE;
*speed100 = true;
return IX_SUCCESS;
}
if ((regval & IX_ETH_MII_SR_10T_FULL_DPX) != 0)
{
/* 10 mb full dplx */
*fullDuplex = TRUE;
*fullDuplex = true;
return IX_SUCCESS;
}
if ((regval & IX_ETH_MII_SR_10T_HALF_DPX) != 0)

View File

@ -72,7 +72,7 @@ IX_OSAL_WRITE_LONG(ixFeatureCtrlRegister, (value)); \
/* Boolean to mark the fact that the EXP_CONFIG address space was mapped */
PRIVATE BOOL ixFeatureCtrlExpCfgRegionMapped = FALSE;
PRIVATE BOOL ixFeatureCtrlExpCfgRegionMapped = false;
/* Pointer holding the virtual address of the Feature Control Register */
PRIVATE VUINT32 *ixFeatureCtrlRegister = NULL;
@ -81,7 +81,7 @@ PRIVATE VUINT32 *ixFeatureCtrlRegister = NULL;
PRIVATE BOOL swConfiguration[IX_FEATURECTRL_SWCONFIG_MAX];
/* Flag to control swConfiguration[] is initialized once */
PRIVATE BOOL swConfigurationFlag = FALSE ;
PRIVATE BOOL swConfigurationFlag = false ;
/* Array containing component mask values */
#ifdef __ixp42X
@ -158,7 +158,7 @@ void ixFeatureCtrlExpMap(void)
/* If the EXP Configuration space has already been mapped then
* return */
if (ixFeatureCtrlExpCfgRegionMapped == TRUE)
if (ixFeatureCtrlExpCfgRegionMapped == true)
{
return;
}
@ -176,7 +176,7 @@ void ixFeatureCtrlExpMap(void)
(VUINT32 *) (expCfgBaseAddress + IX_FEATURE_CTRL_REG_OFFSET);
/* Mark the fact that the EXP_CONFIG space has already been mapped */
ixFeatureCtrlExpCfgRegionMapped = TRUE;
ixFeatureCtrlExpCfgRegionMapped = true;
}
/**
@ -186,15 +186,15 @@ void ixFeatureCtrlExpMap(void)
PRIVATE void ixFeatureCtrlSwConfigurationInit(void)
{
UINT32 i;
if (FALSE == swConfigurationFlag)
if (false == swConfigurationFlag)
{
for (i=0; i<IX_FEATURECTRL_SWCONFIG_MAX ; i++)
{
/* By default, all software configuration are enabled */
swConfiguration[i]= TRUE ;
swConfiguration[i]= true ;
}
/*Make sure this function only initializes swConfiguration[] once*/
swConfigurationFlag = TRUE ;
swConfigurationFlag = true ;
}
}
@ -326,7 +326,7 @@ ixFeatureCtrlProductIdRead ()
extern IxFeatureCtrlProductId AsmixFeatureCtrlProductIdRead();
#ifndef IN_KERNEL
mode = SetKMode(TRUE);
mode = SetKMode(true);
#endif
pdId = AsmixFeatureCtrlProductIdRead();
#ifndef IN_KERNEL
@ -372,7 +372,7 @@ ixFeatureCtrlSwConfigurationCheck (IxFeatureCtrlSwConfig swConfigType)
ixFeatureCtrlSwConfigurationInit();
/* Check and return software configuration */
return ((swConfiguration[(UINT32)swConfigType] == TRUE) ? IX_FEATURE_CTRL_SWCONFIG_ENABLED: IX_FEATURE_CTRL_SWCONFIG_DISABLED);
return ((swConfiguration[(UINT32)swConfigType] == true) ? IX_FEATURE_CTRL_SWCONFIG_ENABLED: IX_FEATURE_CTRL_SWCONFIG_DISABLED);
}
/**

View File

@ -89,9 +89,9 @@ typedef struct
*/
static IxNpeDlNpeState ixNpeDlNpeState[IX_NPEDL_NPEID_MAX] =
{
{FALSE, {IX_NPEDL_NPEID_MAX, 0, 0, 0}},
{FALSE, {IX_NPEDL_NPEID_MAX, 0, 0, 0}},
{FALSE, {IX_NPEDL_NPEID_MAX, 0, 0, 0}}
{false, {IX_NPEDL_NPEID_MAX, 0, 0, 0}},
{false, {IX_NPEDL_NPEID_MAX, 0, 0, 0}},
{false, {IX_NPEDL_NPEID_MAX, 0, 0, 0}}
};
static IxNpeDlStats ixNpeDlStats;
@ -99,7 +99,7 @@ static IxNpeDlStats ixNpeDlStats;
/*
* Software guard to prevent NPE from being started multiple times.
*/
static BOOL ixNpeDlNpeStarted[IX_NPEDL_NPEID_MAX] ={FALSE, FALSE, FALSE} ;
static BOOL ixNpeDlNpeStarted[IX_NPEDL_NPEID_MAX] ={false, false, false} ;
/*
@ -195,7 +195,7 @@ ixNpeDlImageDownload (IxNpeDlImageId *imageIdPtr,
if (IX_SUCCESS == status)
{
ixNpeDlNpeState[npeId].imageId = *imageIdPtr;
ixNpeDlNpeState[npeId].validImage = TRUE;
ixNpeDlNpeState[npeId].validImage = true;
ixNpeDlStats.successfulDownloads++;
status = ixNpeDlNpeExecutionStart (npeId);
@ -204,7 +204,7 @@ ixNpeDlImageDownload (IxNpeDlImageId *imageIdPtr,
(status == IX_NPEDL_CRITICAL_MICROCODE_ERR))
{
ixNpeDlNpeState[npeId].imageId = *imageIdPtr;
ixNpeDlNpeState[npeId].validImage = FALSE;
ixNpeDlNpeState[npeId].validImage = false;
ixNpeDlStats.criticalFailDownloads++;
}
} /* end of if(IX_SUCCESS) */ /* condition: image located successfully in microcode image */
@ -507,7 +507,7 @@ ixNpeDlNpeStopAndReset (IxNpeDlNpeId npeId)
if (IX_SUCCESS == status)
{
/* Indicate NPE has been stopped */
ixNpeDlNpeStarted[npeId] = FALSE ;
ixNpeDlNpeStarted[npeId] = false ;
}
return status;
@ -573,7 +573,7 @@ ixNpeDlNpeExecutionStart (IxNpeDlNpeId npeId)
} /* end of if-else(IX_NPEDL_NPEID_NPEC) */
} /* end of if not IXP42x-A0 Silicon */
if (TRUE == ixNpeDlNpeStarted[npeId])
if (true == ixNpeDlNpeStarted[npeId])
{
/* NPE has been started. */
return IX_SUCCESS ;
@ -588,7 +588,7 @@ ixNpeDlNpeExecutionStart (IxNpeDlNpeId npeId)
if (IX_SUCCESS == status)
{
/* Indicate NPE has started */
ixNpeDlNpeStarted[npeId] = TRUE ;
ixNpeDlNpeStarted[npeId] = true ;
}
IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT,
@ -674,7 +674,7 @@ ixNpeDlNpeExecutionStop (IxNpeDlNpeId npeId)
if (IX_SUCCESS == status)
{
/* Indicate NPE has been stopped */
ixNpeDlNpeStarted[npeId] = FALSE ;
ixNpeDlNpeStarted[npeId] = false ;
}
return status;
@ -840,10 +840,10 @@ ixNpeDlNpeInitAndStartInternal (UINT32 *imageLibrary,
* currently loaded images. If a critical error occured
* during download, record that the NPE has an invalid image
*/
status = ixNpeDlNpeMgrImageLoad (npeId, imageCodePtr, TRUE);
status = ixNpeDlNpeMgrImageLoad (npeId, imageCodePtr, true);
if (IX_SUCCESS == status)
{
ixNpeDlNpeState[npeId].validImage = TRUE;
ixNpeDlNpeState[npeId].validImage = true;
ixNpeDlStats.successfulDownloads++;
status = ixNpeDlNpeExecutionStart (npeId);
@ -851,7 +851,7 @@ ixNpeDlNpeInitAndStartInternal (UINT32 *imageLibrary,
else if ((status == IX_NPEDL_CRITICAL_NPE_ERR) ||
(status == IX_NPEDL_CRITICAL_MICROCODE_ERR))
{
ixNpeDlNpeState[npeId].validImage = FALSE;
ixNpeDlNpeState[npeId].validImage = false;
ixNpeDlStats.criticalFailDownloads++;
}

View File

@ -414,11 +414,11 @@ ixNpeDlImageMgrSignatureCheck (UINT32 *microCodeImageLibrary)
{
IxNpeDlImageMgrImageLibraryHeader *header =
(IxNpeDlImageMgrImageLibraryHeader *) microCodeImageLibrary;
BOOL result = TRUE;
BOOL result = true;
if (!header || header->signature != IX_NPEDL_IMAGEMGR_SIGNATURE)
{
result = FALSE;
result = false;
ixNpeDlImageMgrStats.invalidSignature++;
}
@ -469,11 +469,11 @@ ixNpeDlImageMgrImageIdCompare (
(imageIdA->major == imageIdB->major) &&
(imageIdA->minor == imageIdB->minor))
{
return TRUE;
return true;
}
else
{
return FALSE;
return false;
}
}
@ -491,11 +491,11 @@ ixNpeDlImageMgrNpeFunctionIdCompare (
if ((imageIdA->npeId == imageIdB->npeId) &&
(imageIdA->functionalityId == imageIdB->functionalityId))
{
return TRUE;
return true;
}
else
{
return FALSE;
return false;
}
}
@ -550,7 +550,7 @@ ixNpeDlImageMgrImageFind_legacy (
UINT32 imageCount = 0;
IX_STATUS status = IX_FAIL;
IxNpeDlImageMgrImageLibraryHeader *header;
BOOL imageFound = FALSE;
BOOL imageFound = false;
IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
"Entering ixNpeDlImageMgrImageFind\n");
@ -584,7 +584,7 @@ ixNpeDlImageMgrImageFind_legacy (
/* get the image size */
*imageSize = header->entry[imageCount].image.size;
status = IX_SUCCESS;
imageFound = TRUE;
imageFound = true;
}
imageCount++;
}

View File

@ -229,7 +229,7 @@ static IxNpeDlEcsRegResetValue ixNpeDlEcsRegResetValues[] =
static IxNpeDlNpeMgrStats ixNpeDlNpeMgrStats;
/* Set when NPE register memory has been mapped */
static BOOL ixNpeDlMemInitialised = FALSE;
static BOOL ixNpeDlMemInitialised = false;
/*
@ -290,7 +290,7 @@ ixNpeDlNpeMgrInit (void)
IX_OSAL_ASSERT(virtAddr);
ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEC].baseAddress = virtAddr;
ixNpeDlMemInitialised = TRUE;
ixNpeDlMemInitialised = true;
}
}
@ -314,7 +314,7 @@ ixNpeDlNpeMgrUninit (void)
ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEB].baseAddress = 0;
ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEC].baseAddress = 0;
ixNpeDlMemInitialised = FALSE;
ixNpeDlMemInitialised = false;
return IX_SUCCESS;
}
@ -662,7 +662,7 @@ ixNpeDlNpeMgrNpeReset (
{
/* for each physical register in the NPE reg file, write 0 : */
status = ixNpeDlNpeMgrPhysicalRegWrite (npeBaseAddress, regAddr,
0, TRUE);
0, true);
if (status != IX_SUCCESS)
{
return status; /* abort reset */
@ -684,7 +684,7 @@ ixNpeDlNpeMgrNpeReset (
{
regVal = ixNpeDlCtxtRegResetValues[ctxtReg];
status = ixNpeDlNpeMgrCtxtRegWrite (npeBaseAddress, ctxtNum,
ctxtReg, regVal, TRUE);
ctxtReg, regVal, true);
if (status != IX_SUCCESS)
{
return status; /* abort reset */

View File

@ -79,7 +79,7 @@
* static variables.
*/
PRIVATE BOOL ixNpeMhInitialized = FALSE;
PRIVATE BOOL ixNpeMhInitialized = false;
/*
* Extern function prototypes.
@ -128,7 +128,7 @@ PUBLIC IX_STATUS ixNpeMhInitialize (
*/
ixNpeMhConfigInitialize (npeInterrupts);
ixNpeMhInitialized = TRUE;
ixNpeMhInitialized = true;
IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
"ixNpeMhInitialize\n");
@ -153,7 +153,7 @@ PUBLIC IX_STATUS ixNpeMhUnload (void)
/* Uninitialize the Configuration module */
ixNpeMhConfigUninit ();
ixNpeMhInitialized = FALSE;
ixNpeMhInitialized = false;
IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
"ixNpeMhUnload\n");

View File

@ -105,7 +105,7 @@ IxNpeMhConfigNpeInfo ixNpeMhConfigNpeInfo[IX_NPEMH_NUM_NPES] =
0,
0,
NULL,
FALSE
false
},
{
0,
@ -116,7 +116,7 @@ IxNpeMhConfigNpeInfo ixNpeMhConfigNpeInfo[IX_NPEMH_NUM_NPES] =
0,
0,
NULL,
FALSE
false
},
{
0,
@ -127,7 +127,7 @@ IxNpeMhConfigNpeInfo ixNpeMhConfigNpeInfo[IX_NPEMH_NUM_NPES] =
0,
0,
NULL,
FALSE
false
}
};

View File

@ -124,7 +124,7 @@ BOOL ixNpeMhSendInFifoIsFull(
IxNpeMhNpeId npeId,
UINT32 maxSendRetries)
{
BOOL isFull = FALSE;
BOOL isFull = false;
UINT32 numRetries = 0;
/* check the NPE's inFIFO */

View File

@ -135,10 +135,10 @@ static void drv_mutex_destroy(IxOsalMutex *mutex)
static int drv_mutex_trylock(IxOsalMutex *mutex)
{
int result = TRUE;
int result = true;
if (*mutex == 1)
result = FALSE;
result = false;
return result;
}

View File

@ -160,7 +160,7 @@ static IxQMgrQId priorityTable[IX_QMGR_MAX_NUM_QUEUES];
/*
* This flag indicates to the dispatcher that the priority table needs to be rebuilt.
*/
static BOOL rebuildTable = FALSE;
static BOOL rebuildTable = false;
/* Dispatcher statistics */
static IxQMgrDispatcherStats dispatcherStats;
@ -197,7 +197,7 @@ ixQMgrDispatcherInit (void)
int i;
IxFeatureCtrlProductId productId = 0;
IxFeatureCtrlDeviceId deviceId = 0;
BOOL stickyIntSilicon = TRUE;
BOOL stickyIntSilicon = true;
/* Set default priorities */
for (i=0; i< IX_QMGR_MAX_NUM_QUEUES; i++)
@ -226,7 +226,7 @@ ixQMgrDispatcherInit (void)
dispatcherStats.queueStats[i].priorityChangeCnt = 0;
dispatcherStats.queueStats[i].intNoCallbackCnt = 0;
dispatcherStats.queueStats[i].intLostCallbackCnt = 0;
dispatcherStats.queueStats[i].notificationEnabled = FALSE;
dispatcherStats.queueStats[i].notificationEnabled = false;
dispatcherStats.queueStats[i].srcSel = 0;
}
@ -258,7 +258,7 @@ ixQMgrDispatcherInit (void)
(IX_FEATURE_CTRL_SILICON_TYPE_A0 ==
(IX_FEATURE_CTRL_SILICON_STEPPING_MASK & productId)))
{
stickyIntSilicon = FALSE;
stickyIntSilicon = false;
}
/*
@ -293,7 +293,7 @@ ixQMgrDispatcherPrioritySet (IxQMgrQId qId,
/* Change priority */
dispatchQInfo[qId].priority = priority;
/* Set flag */
rebuildTable = TRUE;
rebuildTable = true;
ixOsalIrqUnlock(ixQMgrLockKey);
@ -364,7 +364,7 @@ ixQMgrNotificationEnable (IxQMgrQId qId,
#endif
#ifndef NDEBUG
dispatcherStats.queueStats[qId].notificationEnabled = TRUE;
dispatcherStats.queueStats[qId].notificationEnabled = true;
dispatcherStats.queueStats[qId].srcSel = srcSel;
#endif
@ -428,7 +428,7 @@ ixQMgrNotificationDisable (IxQMgrQId qId)
* so need critical section
*/
#ifndef NDEBUG
dispatcherStats.queueStats[qId].notificationEnabled = FALSE;
dispatcherStats.queueStats[qId].notificationEnabled = false;
#endif
ixQMgrLockKey = ixOsalIrqLock();
@ -593,7 +593,7 @@ ixQMgrDispatcherLoopRunA0 (IxQMgrDispatchGroup group)
qIndex += IX_QMGR_MIN_QUEUPP_QID;
}
if (statusChangeFlag == FALSE)
if (statusChangeFlag == false)
{
/* check if the interrupt register contains
* only 1 bit set (happy day scenario)
@ -800,7 +800,7 @@ ixQMgrDispatcherLoopRunB0 (IxQMgrDispatchGroup group)
* For example:
* intRegVal = 0x0010
* currDispatchQInfo->intRegCheckMask = 0x0010
* intRegVal == currDispatchQInfo->intRegCheckMask is TRUE.
* intRegVal == currDispatchQInfo->intRegCheckMask is true.
*/
currDispatchQInfo = &dispatchQInfo[qIndex];
if (intRegVal == currDispatchQInfo->intRegCheckMask)
@ -955,7 +955,7 @@ ixQMgrDispatcherLoopRunB0LLP (IxQMgrDispatchGroup group)
* For example:
* intRegVal = 0x0010
* currDispatchQInfo->intRegCheckMask = 0x0010
* intRegVal == currDispatchQInfo->intRegCheckMask is TRUE.
* intRegVal == currDispatchQInfo->intRegCheckMask is true.
*/
currDispatchQInfo = &dispatchQInfo[qIndex];
if (intRegVal == currDispatchQInfo->intRegCheckMask)
@ -1118,7 +1118,7 @@ ixQMgrDispatcherReBuildPriorityTable (void)
int uppQuePriorityTableIndex = IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX;
/* Reset the rebuild flag */
rebuildTable = FALSE;
rebuildTable = false;
/* initialize the mak used to identify the queues in the first half
* of the priority table
@ -1266,7 +1266,7 @@ ixQMgrPeriodicDone (void)
* Update statistics
*/
dispatcherStats.queueStats[i].enableCount++;
dispatcherStats.queueStats[i].notificationEnabled = TRUE;
dispatcherStats.queueStats[i].notificationEnabled = true;
#endif
}
}

View File

@ -66,7 +66,7 @@
* Set to true if initialized
* N.B. global so integration/unit tests can reinitialize
*/
BOOL qMgrIsInitialized = FALSE;
BOOL qMgrIsInitialized = false;
/*
* Function definitions.
@ -90,7 +90,7 @@ ixQMgrInit (void)
ixQMgrQAccessInit ();
/* Initialization complete */
qMgrIsInitialized = TRUE;
qMgrIsInitialized = true;
return IX_SUCCESS;
}
@ -107,7 +107,7 @@ ixQMgrUnload (void)
ixQMgrQCfgUninit ();
/* Uninitialization complete */
qMgrIsInitialized = FALSE;
qMgrIsInitialized = false;
return IX_SUCCESS;
}

View File

@ -94,7 +94,7 @@ typedef struct
char qName[IX_QMGR_MAX_QNAME_LEN+1]; /* Textual description of a queue*/
IxQMgrQSizeInWords qSizeInWords; /* The number of words in the queue */
IxQMgrQEntrySizeInWords qEntrySizeInWords; /* Number of words per queue entry*/
BOOL isConfigured; /* This flag is TRUE if the queue has
BOOL isConfigured; /* This flag is true if the queue has
* been configured
*/
} IxQMgrCfgQ;
@ -120,7 +120,7 @@ static UINT32 freeSramAddress=0;
/* 4 words of zeroed memory for inline access */
static UINT32 zeroedPlaceHolder[4] = { 0, 0, 0, 0 };
static BOOL cfgInitialized = FALSE;
static BOOL cfgInitialized = false;
static IxOsalMutex ixQMgrQCfgMutex;
@ -177,10 +177,10 @@ ixQMgrQCfgInit (void)
strcpy (cfgQueueInfo[loopIndex].qName, "");
cfgQueueInfo[loopIndex].qSizeInWords = 0;
cfgQueueInfo[loopIndex].qEntrySizeInWords = 0;
cfgQueueInfo[loopIndex].isConfigured = FALSE;
cfgQueueInfo[loopIndex].isConfigured = false;
/* Statistics */
stats.qStats[loopIndex].isConfigured = FALSE;
stats.qStats[loopIndex].isConfigured = false;
stats.qStats[loopIndex].qName = cfgQueueInfo[loopIndex].qName;
}
@ -191,13 +191,13 @@ ixQMgrQCfgInit (void)
ixOsalMutexInit(&ixQMgrQCfgMutex);
cfgInitialized = TRUE;
cfgInitialized = true;
}
void
ixQMgrQCfgUninit (void)
{
cfgInitialized = FALSE;
cfgInitialized = false;
/* Uninitialise the AqmIf component */
ixQMgrAqmIfUninit ();
@ -281,13 +281,13 @@ ixQMgrQConfig (char *qName,
IX_QMGR_QUE_BUFFER_SPACE_SIZE);
/* The queue is now configured */
cfgQueueInfo[qId].isConfigured = TRUE;
cfgQueueInfo[qId].isConfigured = true;
ixOsalMutexUnlock(&ixQMgrQCfgMutex);
#ifndef NDEBUG
/* Update statistics */
stats.qStats[qId].isConfigured = TRUE;
stats.qStats[qId].isConfigured = true;
stats.qStats[qId].qName = cfgQueueInfo[qId].qName;
#endif
return IX_SUCCESS;
@ -417,7 +417,7 @@ ixQMgrQIsConfigured (IxQMgrQId qId)
{
if (!IX_QMGR_QID_IS_VALID(qId))
{
return FALSE;
return false;
}
return cfgQueueInfo[qId].isConfigured;
@ -487,7 +487,7 @@ watermarkLevelIsOk (IxQMgrQId qId, IxQMgrWMLevel level)
case IX_QMGR_Q_WM_LEVEL64:
break;
default:
return FALSE;
return false;
}
/* Check watermark is not bigger than the qSizeInEntries */
@ -495,10 +495,10 @@ watermarkLevelIsOk (IxQMgrQId qId, IxQMgrWMLevel level)
if ((unsigned)level > qSizeInEntries)
{
return FALSE;
return false;
}
return TRUE;
return true;
}
PRIVATE BOOL
@ -512,10 +512,10 @@ qSizeInWordsIsOk (IxQMgrQSizeInWords qSize)
case IX_QMGR_Q_SIZE32:
case IX_QMGR_Q_SIZE64:
case IX_QMGR_Q_SIZE128:
status = TRUE;
status = true;
break;
default:
status = FALSE;
status = false;
break;
}
@ -532,10 +532,10 @@ qEntrySizeInWordsIsOk (IxQMgrQEntrySizeInWords entrySize)
case IX_QMGR_Q_ENTRY_SIZE1:
case IX_QMGR_Q_ENTRY_SIZE2:
case IX_QMGR_Q_ENTRY_SIZE4:
status = TRUE;
status = true;
break;
default:
status = FALSE;
status = false;
break;
}

View File

@ -1933,12 +1933,12 @@ PUBLIC IX_STATUS ixAtmdAccPortDisable (IxAtmLogicalPort port);
* @brief disable a PHY logical port
*
* This function indicates if the port disable for a port has completed. This
* function will return TRUE if the port has never been enabled.
* function will return true if the port has never been enabled.
*
* @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1]
*
* @return @li TRUE disable is complete
* @return @li FALSE disable failed, wrong parameter .
* @return @li true disable is complete
* @return @li false disable failed, wrong parameter .
*
* @note - This function needs internal locks and should not be called
* from an interrupt context

Some files were not shown because too many files have changed in this diff Show More