Commit Graph

1337 Commits

Author SHA1 Message Date
Markus Klotzbücher
f8785e96c9 Erasing works too now. The CS don't care causes problem with READSTATUS,
don't ask me why. There are still bugs in the bad block logic.
2006-03-03 20:13:43 +01:00
Markus Klotzbücher
24e1217be3 Write operation is working. Turned out that the READSTATUS hack was wrong
after all.
2006-03-03 16:09:28 +01:00
Markus Klotzbücher
9187a35b6c Writing is working, but there's still a bug that causes the data written to
start at an offset of 4 bytes from the start of the page.
2006-03-03 15:37:01 +01:00
Markus Klotzbücher
19fdeff433 Implemented writing, not working yet. 2006-03-03 12:11:11 +01:00
Markus Klotzbücher
e2053f9c7a Moved the waiting loop for "Read Data Request" RDDREQ into the
delta_cmdfunc function, because this bit is only set once after a command
is sent and this allows read functions to be called multiple times.
2006-03-02 14:02:36 +01:00
Markus Klotzbücher
bb1ff049fb Read bug fixed. Now "nand bad" list the badblocks correctly (i hope, since
there are 0)
2006-03-02 12:10:01 +01:00
Markus Klotzbücher
481911c78c Further NAND stuff implemented. Basic read commands seem to work. 2006-03-01 23:33:27 +01:00
Markus Klotzbücher
e8cd00835e All subsystem clocks not immediately need are turned at reset. 2006-02-28 23:11:07 +01:00
Markus Klotzbücher
00c35bd214 Added GPIO initialization of DF signal. Still not working. 2006-02-28 22:51:01 +01:00
Markus Klotzbücher
6949328d7d First steps implementing NAND support. Not working, fails to read ID. 2006-02-28 18:05:25 +01:00
Markus Klotzbücher
0377dca227 Merge /home/tur/nand/u-boot/
This is a first version of the testing-NAND branch merged back to main.
2006-02-24 14:16:31 +01:00
Markus Klotzbücher
7d4d1ce48c Merge branch 'master' of http://www.denx.de/git/u-boot 2006-02-24 11:34:34 +01:00
Bartlomiej Sieka
038ccac511 Merge with /home/wd/git/u-boot/testing-NAND/ to add new NAND handling. 2006-02-24 09:37:22 +01:00
Markus Klotzbücher
599f52253a SDRAM now working. 2006-02-22 17:48:43 +01:00
Markus Klotzbücher
ff3c2a9478 SDRAM now working for delta board, but there are still aliasing problems,
we only see 64MB.
2006-02-22 14:05:44 +01:00
Wolfgang Denk
6624b687bc Rename SMMACO4 board into smmaco4 for consistency with Linux. 2006-02-22 10:25:39 +01:00
Wolfgang Denk
5f0be01356 Disable CMD_BSP for SMMACO4 board. 2006-02-22 02:39:31 +01:00
Wolfgang Denk
9cdc838613 Merge with /home/hs/PanDacom/u-boot-dev 2006-02-22 01:59:13 +01:00
Markus Klotzbücher
48b6242aa1 SDRAM seems to be working on delta board, though u-boot doesn't start yet. 2006-02-22 00:06:01 +01:00
Wolfgang Denk
881a87ecba Add GIT version information (commid ID) to untagged U-Boot versions
As done in the linux kernel, the U-Boot version (U_BOOT_VERSION)
of all unreleased (untagged) U-Boot images will be automatically
extended upon compiletime with a part of the GIT commit ID and
possibly with "dirty" if uncommited changes are detected.

Here an example for the resulting version:
"U-Boot 1.1.4-g3457ac18-dirty"

The version is now maintained in the toplevel Makefile and the
version headers are autogenerated.

Patch by Stefan Roese, 9 Feb 2006
2006-02-21 17:33:04 +01:00
Wolfgang Denk
654c2d2836 Merge with /home/sr/git/u-boot 2006-02-21 16:41:43 +01:00
Heiko Schocher
075866d840 [Patch] Add basic support for the SMMACO4 Board from PanDaCom.
Signed-off-by: Heiko Schocher <hs@denx.de>
2006-02-20 17:34:12 +01:00
Markus Klotzbücher
4f7a0e3671 New board directory and config for the benq delta board (copied from
zylonite). Minor pxa-regs.h update.
2006-02-20 16:37:37 +01:00
Markus Klotzbücher
8fb1857b40 Merged and added more pxa-regs.h stuff, especially the GPIO Control
Register Definitions.
2006-02-20 15:59:07 +01:00
Markus Klotzbücher
57dc57f14d Merged sufficient changes to pxa-regs.h in order to make u-boot compile.
It doesn't run yet.
2006-02-19 16:03:49 +01:00
Markus Klotzbücher
bf5988e533 Reverting pxa-regs.h back to original, because the intel Monahans one
breaks backward compatibility and I don't trust it. Instead, i'll verify
and merge the parts I need while porting.
2006-02-10 17:12:14 +01:00
Markus Klotzbücher
6ece03f267 Config updated for compiling the SMC911111 network driver 2006-02-10 17:08:26 +01:00
Markus Klotzbücher
b2b43463af Changed gcc-4.0 global data pointer fix to conform with the fix for this on
other platforms (see c75eba3b41)
2006-02-10 11:25:41 +01:00
Markus Klotzbücher
b3c36e6b94 basic u-boot is working, boots into the command shell. 2006-02-09 13:19:25 +01:00
Markus Klotzbücher
9d803d8c0b Changes:
* lots of bugfixes in the assembler code
	* reverted hardware.h back to original
	* enabled hardware DRAM calibration
	* GCC-4 fix: modified GLOBAL_DATA_POINTER macro
2006-02-08 18:56:28 +01:00
Stefan Roese
79830d591a Convert CPCI750 to use common CFI flash driver
Patch by Reinhard Arlt, 8 Feb 2006
2006-02-08 15:54:15 +01:00
Markus Klotzbücher
af646e865f Forgot to add files to zylonite branch. 2006-02-07 20:48:45 +01:00
Markus Klotzbücher
e0269579a5 This is the first commit for the u-boot zylonite port. The following has be
done so far:

	* created zylonite board dir (based on lubbock)
	* extended some - but not all pxa sources and headers for Intel
	  Monahans support (CONFIG_CPU_MONAHANS)
	* created Makefile zylonite target + MAKEALL entry
	* added some debug nonsense, remove later, grep for mk@tbd

Status: compiles (eldk-4.0), and can be started with BDI, but runs forever
	and doesn't halt at breakpoints. Hmmm...
2006-02-07 20:04:48 +01:00
Stefan Roese
48a05a5188 Various changes to esd HH405 board specific files
Patch by Matthias Fuchs, 07 Feb 2006
2006-02-07 16:51:04 +01:00
Wolfgang Denk
84e106c09d Update default environment for INKA4x00 board. 2006-02-07 15:18:25 +01:00
Wolfgang Denk
57cac1fa54 Cleanup U-Boot boot messages on ARM.
To match the U-Boot user interface on ARM platforms to the U-Boot
standard (as on PPC platforms), some messages with debug character
are removed from the default U-Boot build.
Enable DEBUG for lib_arm/board.c to enable debug messages.
New CONFIG_DISPLAY_CPUINFO and CONFIG_DISPLAY_BOARDINFO options.

Patch  by Stefan Roese, 24 Jan 2006
2006-01-29 19:12:41 +01:00
Stefan Roese
18c5e64c5b Fix various compiler warnings on ppc4xx builds (ELDK 4.0)
Patch by Stefan Roese, 18 Jan 2006
2006-01-18 20:06:44 +01:00
Stefan Roese
a7b9fb9110 Add VGA support (CT69000) to CPCI750 board.
Insert missing __le32_to_cpu() for filesize in ext2fs_read_file().

Patch by Reinhard Arlt, 30 Dec 2005
2006-01-18 20:05:34 +01:00
Stefan Roese
2076d0a15f PMC405 and CPCI405: Moved configuration of pci resources into config file.
PMC405 and CPCI2DP: Added firmware download and booting via pci.

Patch by Matthias Fuchs, 20 Dec 2005
2006-01-18 20:03:15 +01:00
Wolfgang Denk
c4b465f63e Fix 28F256J3A support on PM520 board
(without bank-switching only 32 MB can be accessed)
2006-01-13 17:00:56 +01:00
Wolfgang Denk
756ceb8935 Update CHANGELOG. 2006-01-11 13:04:53 +01:00
Wolfgang Denk
3bb6680655 Fix mkimage bug with multifile images created on 64 bit systems. 2006-01-11 13:03:54 +01:00
Wolfgang Denk
c7428d49ac Add support for 28F256J3A flah (=> 64 MB) on PM520 board 2005-12-29 15:12:09 +01:00
Wolfgang Denk
97c8d0bbbd Add support for 28F256J3A flash chips 2005-12-22 01:50:50 +01:00
Wolfgang Denk
27e166b875 Fix compiler problem with at91rm9200dk board.
Patch by Eugen Bigz, 19 Dec 2005
2005-12-19 13:02:45 +01:00
Wolfgang Denk
e6b6d16de7 Merge with /home/sr/git/u-boot 2005-12-16 17:39:27 +01:00
Wolfgang Denk
a9e642e2f8 MPC5200: Set PCI retry counter to 0 = infinite retry;
The default of 255 is too short for slow devices.
Patch by Martin Nykodym, 12 Dec 2005
2005-12-16 15:14:18 +01:00
Stefan Roese
81a3170b15 Changes to Yellowstone & Yosemite 440EP/GR eval boards:
- Changed GPIO setup to enable another address line in order to
  address 64M of FLASH.
- Added function sdram_tr1_set to auto calculate the tr1 value for
  the DDR.
Patch by Steven Blakeslee, 12 Dec 2005
2005-12-15 09:43:12 +01:00
Wolfgang Denk
e43232dee8 Merge with /home/m8/git/u-boot 2005-12-14 15:05:59 +01:00
Wolfgang Denk
7481266e4e 2005-12-12 16:06:05 +01:00