Add support for enabling uefi capsule authentication. This feature is
enabled by setting the environment variable
"capsule_authentication_enabled".
The following configs are needed for enabling uefi capsule update and
capsule authentication features on the platform.
CONFIG_EFI_HAVE_CAPSULE_SUPPORT=y
CONFIG_EFI_CAPSULE_ON_DISK=y
CONFIG_EFI_CAPSULE_FIRMWARE_MANAGEMENT=y
CONFIG_EFI_CAPSULE_FIRMWARE=y
CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
CONFIG_EFI_CAPSULE_AUTHENTICATE=y
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Add support for authenticating uefi capsules. Most of the signature
verification functionality is shared with the uefi secure boot
feature.
The root certificate containing the public key used for the signature
verification is stored as part of the device tree blob. The root
certificate is stored as an efi signature list(esl) file -- this file
contains the x509 certificate which is the root certificate.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
The efi_sigstore_parse_sigdb function reads the uefi authenticated
variable, stored in the signature database format and builds the
signature store structure. Factor out the code for building
the signature store. This can then be used by the capsule
authentication routine to build the signature store even when the
signature database is not stored as an uefi authenticated variable
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
The pkcs7 header parsing functionality is pretty generic, and can be
used by other features like capsule authentication. Make the function
an extern, also changing it's name to efi_parse_pkcs7_header
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
When building the capsule using scripts in edk2, a fmp header is
added on top of the binary payload. Add logic to detect presence of
the header. When present, the pointer to the image needs to be
adjusted as per the size of the header to point to the actual binary
payload.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
RFC 2315 Section 9.3 describes the message digesting process. The
digest calculated depends on whether the authenticated attributes are
present. In case of a scenario where the authenticated attributes are
present, the message digest that gets signed and is part of the pkcs7
message is computed from the auth attributes rather than the contents
field.
Check if the auth attributes are present, and if set, use the auth
attributes to compute the hash that would be compared with the
encrypted hash on the pkcs7 message.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
When a new event is queued we have to process the event queue by calling
efi_process_event_queue(). But there is not reason to call the function
when the event is not queueable.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Although the function description states the caller must provide a
sufficient buffer, it's better to have in function checks that the
destination buffer can hold the intended value.
So let's add an extra argument with the buffer size and check that
before doing any copying.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Up to now we install the EFI_LOAD_FILE2_PROTOCOL to load an initrd
unconditionally. Although we correctly return various EFI exit codes
depending on the file status (i.e EFI_NO_MEDIA, EFI_NOT_FOUND etc), the
kernel loader only falls back to the cmdline interpreted initrd if the
protocol is not installed.
This creates a problem for EFI installers, since they won't be able to
load their own initrd and start the installation.
A following patch introduces a different logic where we search for an
initrd path defined in an EFI variable named 'Initrd####'.
If the bootmgr is used to launch the EFI payload, we'll will try to match
the BootCurrent value and find the corresponding initrd
(i.e Boot0000 -> Initrd0000 etc). If the file is found, we'll install
the required protocol which the kernel's efi-stub can use and load our
initrd.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
dm.h and env.h serve no purpose here. Remove them and sort the
remaining in alphabetical order.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Do not use data from the loaded image object after deleting it.
Fixes: 126a43f15b ("efi_loader: unload applications upon Exit()")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
load_options passed from do_efibootmgr() to do_bootefi_exec() may contain
invalid data from the stack which will lead to an invalid free().
Fixes: 0ad64007fe ("efi_loader: set load options in boot manager")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Up to now the escape key was not correctly detected in UEFI applications.
We had to hit it twice for a single escape to be recognized.
Use a 10 ms delay to detect if we are dealing with the escape key or an
escape sequence.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
IS_ENABLED() contains parentheses. But we should still put extra
parentheses around it in an if statement for readability.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
When opening an OP-TEE session we need to check the internal return
value of OP-TEE call arguments as well the return code of the
function itself.
The code was also ignoring to close the OP-TEE session in case the
shared memory registration failed.
Fixes: f042e47e8f ("efi_loader: Implement EFI variable handling via OP-TEE")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Currently the size of the buffer to keep UEFI variables in memory is fixed
at 16384 bytes. This size has proven to be too small for some use cases.
Make the size of the memory buffer for UEFI variables customizable.
Reported-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Do not use data from the loaded image object after deleting it.
Fixes: 126a43f15b ("efi_loader: unload applications upon Exit()")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
load_options passed from do_efibootmgr() to do_bootefi_exec() may contain
invalid data from the stack which will lead to an invalid free().
Fixes: 0ad64007fe ("efi_loader: set load options in boot manager")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Up to now the escape key was not correctly detected in UEFI applications.
We had to hit it twice for a single escape to be recognized.
Use a 10 ms delay to detect if we are dealing with the escape key or an
escape sequence.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
IS_ENABLED() contains parentheses. But we should still put extra
parentheses around it in an if statement for readability.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
When opening an OP-TEE session we need to check the internal return
value of OP-TEE call arguments as well the return code of the
function itself.
The code was also ignoring to close the OP-TEE session in case the
shared memory registration failed.
Fixes: f042e47e8f ("efi_loader: Implement EFI variable handling via OP-TEE")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
While assigning the sequence number to subsystem instances by reading the
aliases property, only DT nodes names are compared and not the complete
path. This causes a problem when there are two DT nodes with same name but
have different paths.
In arch/arm/dts/k3-am65-main.dtsi there are two USB controllers with the
same device tree node name but different path. When aliases are defined for
these USB controllers then fdtdec_get_alias_seq() fails to pick the correct
instance for a given index.
fdt_path_offset() function is slow and this would effect the U-Boot
startup. To avert the time penalty on all boards, apply this extra check
only when required by using a config option.
Fix it by comparing the phandles of DT nodes after the node names match,
under a config option.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Fix whitespace error in Kconfig:
Signed-off-by: Simon Glass <sjg@chromium.org>
Implement a reset function that we can call after ExitBootServices(),
when all driver model devices are gone.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Currently the size of the buffer to keep UEFI variables in memory is fixed
at 16384 bytes. This size has proven to be too small for some use cases.
Make the size of the memory buffer for UEFI variables customizable.
Reported-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
There is no-longer any need to check if sequence numbers are valid, since
this is ensured by driver model. Drop the unwanted logic.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present various drivers etc. access the device's 'seq' member directly.
This makes it harder to change the meaning of that member. Change access
to go through a function instead.
The drivers/i2c/lpc32xx_i2c.c file is left unchanged for now.
Signed-off-by: Simon Glass <sjg@chromium.org>
We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).
Rename some of the latter variables to end with 'plat' for consistency.
Signed-off-by: Simon Glass <sjg@chromium.org>
This construct is quite long-winded. In earlier days it made some sense
since auto-allocation was a strange concept. But with driver model now
used pretty universally, we can shorten this to 'auto'. This reduces
verbosity and makes it easier to read.
Coincidentally it also ensures that every declaration is on one line,
thus making dtoc's job easier.
Signed-off-by: Simon Glass <sjg@chromium.org>
Provide a unit test that causes an illegal instruction to occur.
The test can be run with the following commands:
=> setenv efi_selftest exception
=> bootefi selftest
This might be the output:
Executing 'exception'
EFI application triggers exception.
Illegal instruction
pc = 0x1444d016, pc_reloc = 0xffffaa078e8dd016
UEFI image [0x0000000000000000:0xffffffffffffffff] '/\selftest'
UEFI image [0x000000001444b000:0x0000000014451fff] pc=0x2016 '/bug.efi'
Resetting ...
It would tell us that the exception was triggered by an instruction
0x2016 bytes after the load address of the binary with filename /bug.efi.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
We provide a UEFI driver for block devices. When ConnectController() is
called for a handle with the EFI_BLOCK_IO_PROTOCOL this driver creates the
partitions. When DisconnectController() is called the handles for the
partitions have to be deleted. This requires that the child controllers
(partitions) open the EFI_BLOCK_IO_PROTOCOL of the controller (block IO
device) with attribute EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
A unit test is supplied to test the support for the EFI_LOAD_FILE_PROTOCOL
and the EFI_LOAD_FILE2_PROTOCOL by the LoadImage() boot service.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
efi_load_image_from_file() should read via either of:
* EFI_SIMPLE_FILE_SYSTEM_PROTOCOL
* EFI_LOAD_FILE_PROTOCOL
* EFI_LOAD_FILE2_PROTOCOL
To make the code readable carve out a function to load the image via the
file system protocol.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Implementing support for loading images via the EFI_LOAD_FILE_PROTOCOL
requires the boot policy as input for efi_load_image_from_path().
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The EFI_LOAD_FILE_PROTOCOL_GUID and EFI_LOAD_FILE2_PROTOCOL_GUID are needed
to complement the implementation of the LoadFile() boot service.
Remove a duplicate declaration of a variable for the
EFI_LOAD_FILE2_PROTOCOL_GUID.
Move the remaining declaration to efi_boottime.c.
Add a variable for the EFI_LOAD_FILE_PROTOCOL_GUID.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
For implementing support for the EFI_LOAD_FILE_PROTOCOL in the LoadImage()
service we will have to call the LocateDevicePath() service. To avoid a
forward declaration resequence the functions.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Our implementation of the EFI_HII_CONFIG_ROUTING_PROTOCOL is a mere stub,
where all services return an error code. The protocol is neither needed for
the EFI shell nor for the UEFI SCT. To reduce the code size remove it from
the U-Boot binary.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The EFI_RT_PROPERTIES_TABLE configuration table indicates which runtime
services are available at runtime.
Even if CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y, we neither support
UpdateCapsule() nor QueryCapsuleCapabilities() at runtime. Thus we should
not set the corresponding flags EFI_RT_SUPPORTED_UPDATE_CAPSULE and
EFI_RT_SUPPORTED_QUERY_CAPSULE_CAPABILITIES in RuntimeServicesSupported.
Fixes: 2bc27ca8a0 ("efi_loader: define UpdateCapsule api")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The current function set_name() used to create short names has the
following deficiencies resolved by this patch:
* Long names (e.g. FOO.TXT) are stored even if a short name is enough.
* Short names with spaces are created, e.g. "A ~1.TXT".
* Short names with illegal characters are created, e.g. "FOO++BAR".
* Debug output does not not consider that the short file name has no
concluding '\0'.
The solution for the following bug is split of into a separate patch:
* Short file names must be unique.
This patch only provides the loop over possible short file names.
Fixes: c30a15e590 ("FAT: Add FAT write feature")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
At present this function returns 1 on success and 0 on failure. But in
the latter case it provides no indication of what went wrong.
If an attempt is made to delete a non-existent variable, the caller may
want to ignore this error. This happens when setting a non-existent
variable to "", for example.
Update the function to return 0 on success and a useful error code on
failure. Add a function comment too.
Make sure that env_set() does not return an error if it is deleting a
variable that doesn't exist. We could update env_set() to return useful
error numbers also, but that is beyond the scope of this change.
Signed-off-by: Simon Glass <sjg@chromium.org>
wip
In this commit, a very simple firmware management protocol driver
is implemented. It will take a binary image in a capsule file and
apply the data using dfu backend storage drivers via dfu_write_by_alt()
interface.
So "dfu_alt_info" variable should be properly set to specify a device
and location to be updated. Please read README.dfu.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
In this commit, a very simple firmware management protocol driver
is implemented. It will take a common FIT image firmware in a capsule
file and apply the data using dfu backend storage drivers via
update_fit() interface.
So "dfu_alt_info" variable should be properly set to specify a device
and location to be updated. Please read README.dfu.
Fit image is a common file format for firmware update on U-Boot, and
this protocol works neatly just as a wrapper for one.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
A capsule tagged with the guid, EFI_FIRMWARE_MANAGEMENT_CAPSULE_ID_GUID,
is handled as a firmware update object.
What efi_update_capsule() basically does is to load any firmware management
protocol (or fmp) drivers contained in a capsule, find out an appropriate
fmp driver and then invoke its set_image() interface against each binary
in a capsule.
In this commit, however, loading drivers is not supported.
The result of applying a capsule is set to be stored in "CapsuleXXXX"
variable, but its implementation is deferred to a fmp driver.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Capsule data can be loaded into the system either via UpdateCapsule
runtime service or files on a file system (of boot device).
The latter case is called "capsules on disk", and actual updates will
take place at the next boot time.
In this commit, we will support capsule on disk mechanism.
Please note that U-Boot itself has no notion of "boot device" and
all the capsule files to be executed will be detected only if they
are located in a specific directory, \EFI\UpdateCapsule, on a device
that is identified as a boot device by "BootXXXX" variables.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
In this commit, skeleton functions for capsule-related API's are
added under CONFIG_EFI_UPDATE_CAPSULE configuration.
Detailed implementation for a specific capsule type will be added
in the succeeding patches.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
In the previous patches we only introduced a minimal subset of the
EFI_TCG2_PROTOCOL protocol implementing GetCapability().
So let's continue adding features to it, introducing the
GetEventLog() and HashLogExtendEvent() functions.
In order to do that we first need to construct the eventlog in memory,
specifically in EFI_BOOT_SERVICES_DATA memory and a configuration table
from EFI_ACPI_MEMORY_NVS.
U-Boot won't currently add any events to the log or measure any
components, but will expose the necessary EFI APIs for applications
to do so.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The current tpm2_pcr_extend is hardcoded using SHA256.
Let's make the actual command to the TPM2 configurable so we can support
a wider range of algorithms and keep the current command line as-is i.e
limited to SHA256 only
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Use logging functions instead of printf() and debug().
Change logging messages for uclass creation and destruction to log_debug().
Reported-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
The origin patch didn't have this change and it was caused by manual
resolution where additional backslash was added.
Fixes: 6723b4c6ca ("binman: Call helper function binman_set_rom_offset() to fill offset")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
commit 1fabfeef506c ("efi_loader: parameter check in GetNextVariableName()")
introduces a check using u16_strnlen(). This code is used on EFI
runtime variables as well, so unless we mark it as runtime, the kernel
will crash trying to access it.
Fixes: 1fabfeef506c ("efi_loader: parameter check in GetNextVariableName()")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Enable EFI_SET_TIME on the sandbox and QEMU ARM to ensure that we compile
and test the relevant code.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
If GetNextVariableName() is called with a non-existing combination of
VariableName and VendorGuid, return EFI_INVALID_PARAMETER.
If GetNextVariableName() is called with a string that is not zero
terminated, return EFI_INVALID_PARAMETER.
Reformat a line over 80 characters.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Since U-boot EFI implementation is getting richer it makes sense to
add support for EFI_TCG2_PROTOCOL taking advantage of any hardware TPM
available on the device.
This is the initial implementation of the protocol which only adds
support for GetCapability(). It's limited in the newer and safer
TPMv2 devices.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
When copying a string with must allocate a byte for the terminating '\0' in
the target buffer.
Fixes: fbe4c7df00 ("efi_loader: enable file SetInfo()")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Add missing newline to log messages in efi_rng_register() otherwise
something like below would be shown
Scanning disk virtio-blk#31...
Found 2 disks
Missing RNG device for EFI_RNG_PROTOCOLNo EFI system partition
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
When calling ExitBootServices during out unit tests we should not detach
devices as we need console output for runtime tests.
Fixes: 529441ca89 ("efi_loader: Disable devices before handing over control")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
For implementing the EFI_TCG2_PROTOCOL we need the count field returned by
the TPM when reading capabilities via tpm2_get_capability().
Adjust the implementation of the 'tpm2 get_capability' command accordingly.
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
For validating the fixed up device tree we need a tool to need to save it
to a file.
dtbdump.efi copies the configuration table with the device tree to a file
on the same partition from which dtbdump.efi was invoked. The file name can
be entered on the console.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
When deleting a non-volatile variable it was deleted from memory but the
deletion was not persisted to the file system.
SetVariable() may be called with attributes == 0 to delete a variable. To
determine if the deletion shall be persisted we have to consider the
non-volatile flag in the attributes of the deleted variable and not the
value passed in the call parameter.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
patman showing email replies from Patchwork
sandbox poweroff command
minor fixes in binman, tests
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl+kJL8RHHNqZ0BjaHJv
bWl1bS5vcmcACgkQfxc6PpAIreaDpAf+MajyuxlmGmFTjpyiB026aWiYE4rAn4AE
bXEDxHpOTIH4hDX7kYVWPmuKivHJo2hF0WUpIFBEAgtc2dOfjOP+mrDjBzG1Pikl
z5yuilG7eHwC1kTIkPv/tPHwDWRBI5VNwTYq0VTtffMKr8LCBo96wEYEbeYK0xdQ
kpNa9d4G+tpx20BCRgPLeOMk2pg5SVszkCCkmmPd12rO2zJ9+wWa8fwA759E93Rw
RshoRCtLNo2nEA3uJVG2aN9n3eAdM/iupDVdBLg50SFKabUxt7OcvGOC8NzGdAmT
9UbB8scvQJyI/kylGT+ghH3o2RqQGvuIRXmDyETckdkpiqK0SQvysg==
=eOGz
-----END PGP SIGNATURE-----
Merge tag 'dm-pull5nov20' of git://git.denx.de/u-boot-dm
patman status subcommand to collect tags from Patchwork
patman showing email replies from Patchwork
sandbox poweroff command
minor fixes in binman, tests
Now that we can use devicetree to specify this information, drop the old
CONFIG options.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Some boards want to specify the manufacturer or product name but do not
need to have their own sysinfo driver.
Add a default driver which provides a way to specify this SMBIOS
information in the devicetree, without needing any board-specific
functionality.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
The current tables only support a subset of the available fields defined
by the SMBIOS spec. Add a few more.
We could use CONFIG_SYS_CPU or CONFIG_SYS_SOC as a default for family, but
the meaning of that value relates more to the whole system rather than
just the SoC.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Support a way to put SMBIOS properties in the device tree. These can be
placed in a 'board' device in an 'smbios' subnode.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
As a first step to obtaining SMBIOS information from the devicetree, add
an ofnode parameter to the writing functions.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
If there is no reset line, this still emits ACPI code for the reset GPIO.
Fix it by updating the check.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
At present all tables are placed starting at address f0000 in memory, and
can be up to 64KB in size. If the tables are very large, this may not
provide enough space.
Also if the tables point to other tables (such as console log or a ramoops
area) then we must allocate other memory anyway.
The bloblist is a nice place to put these tables since it is contiguous,
which makes it easy to reserve this memory for linux using the 820 tables.
Add an option to put some of the tables in the bloblist. For SMBIOS and
ACPI, create suitable pointers from the f0000 region to the new location
of the tables.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: squashed in http://patchwork.ozlabs.org/project/uboot/patch/
20201105062407.1.I8091ad931cbbb5e3b6f6ababdf3f8d5db0d17bb9@changeid/]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
There is prepared function for filing rom_offset. That's why use it instead
of copying content of it.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add a very simple API to be able to access SMBIOS strings
like vendor, model and bios version.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
The series contains the following enhancements
* preparatory patches for UEFI capsule updates
* initialization of the emulated RTC using an environment variable
and a bug fix
* If DisconnectController() is called for a child controller that is the
only child of the driver, the driver must be disconnected.
-----BEGIN PGP SIGNATURE-----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=mCEL
-----END PGP SIGNATURE-----
Merge tag 'efi-2020-01-rc2-2' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi
Pull request for UEFI sub-system for efi-2021-01-rc2 (2)
The series contains the following enhancements
* preparatory patches for UEFI capsule updates
* initialization of the emulated RTC using an environment variable
and a bug fix
* If DisconnectController() is called for a child controller that is the
only child of the driver, the driver must be disconnected.
Some commands can get very unweildy if they have too many positional
arguments. Adding options makes them easier to read, remember, and
understand.
This implementation of getopt has been taken from barebox, which has had
option support for quite a while. I have made a few modifications to their
version, such as the removal of opterr in favor of a separate getopt_silent
function. In addition, I have moved all global variables into struct
getopt_context.
The getopt from barebox also re-orders the arguments passed to it so that
non-options are placed last. This allows users to specify options anywhere.
For example, `ls -l foo/ -R` would be re-ordered to `ls -l -R foo/` as
getopt parsed the options. However, this feature conflicts with the const
argv in cmd_tbl->cmd. This was originally added in 54841ab50c ("Make sure
that argv[] argument pointers are not modified."). The reason stated in
that commit is that hush requires argv to stay unmodified. Has this
situation changed? Barebox also uses hush, and does not have this problem.
Perhaps we could use their fix?
I have assigned maintenance of getopt to Simon Glass, as it is currently
only used by the log command. I would also be fine maintaining it.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
This function will be used from several places in UEFI subsystem
to generate some specific form of utf-16 variable name.
For example, L"Capsule0001"
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Move function to separate module.
Use char * as argument instead of u16 *.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
If this option, CONFIG_EFI_SETUP_EARLY, is enabled, the initialisation
of UEFI subsystem will be done as part of U-Boot initialisation.
Please note that this option won't be enabled explicitly by users,
instead, should be enabled implicitly by other configuration options.
Specifically, this feature will be utilised in implementing capsule-on-disk
feature.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
If ChildHandle indicates the sole child of the driver, disconnect the
driver.
This fixes the test results for UEFI SCT 2.6 A
sub-tests 5.1.3.12.43, 5.1.3.12.44, 5.1.3.12.45.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Add support for multiple images, since these are used on x86 now. Select
the first image for now, since that is generally the correct one. At some
point we can add a way to determine which image is currently running.
Signed-off-by: Simon Glass <sjg@chromium.org>
Provide a function to read the ROM offset so that we can store the value
in one place and clients don't need to store it themselves after calling
binman_set_rom_offset().
Signed-off-by: Simon Glass <sjg@chromium.org>
common:
- Add support for 64bit loadables from SPL
xilinx:
- Update documentation and record ownership
- Enable eeprom board detection based legacy and fru formats
- Add support for FRU format
microblaze:
- Optimize low level ASM code
- Enable SPI/I2C
- Enable distro boot
zynq:
- Add support for Zturn V5
zynqmp:
- Improve silicon detection code
- Enable several kconfig options
- Align DT with the latest state
- Enabling security commands
- Enable and support FPGA loading from SPL
- Optimize xilinx_pm_request() calling
versal:
- Some DTs/Kconfig/defconfig alignments
- Add binding header for clock and power
zynq-sdhci:
- Add support for tap delay programming
zynq-spi/zynq-qspi:
- Use clock framework for getting clocks
xilinx-spi:
- Fix some code issues (unused variables)
serial:
- Check return value from clock functions in pl01x
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCX5rH/QAKCRDKSWXLKUoM
IRPAAJ9SvHR3w1qTc5W+Q5CWBUH5wJbNYQCaA4PpqZCdvyu1+nF5luL6JHhbDgw=
=hOd7
-----END PGP SIGNATURE-----
Merge tag 'xilinx-for-v2021.01-v2' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze
Xilinx changes for v2021.01-v2
common:
- Add support for 64bit loadables from SPL
xilinx:
- Update documentation and record ownership
- Enable eeprom board detection based legacy and fru formats
- Add support for FRU format
microblaze:
- Optimize low level ASM code
- Enable SPI/I2C
- Enable distro boot
zynq:
- Add support for Zturn V5
zynqmp:
- Improve silicon detection code
- Enable several kconfig options
- Align DT with the latest state
- Enabling security commands
- Enable and support FPGA loading from SPL
- Optimize xilinx_pm_request() calling
versal:
- Some DTs/Kconfig/defconfig alignments
- Add binding header for clock and power
zynq-sdhci:
- Add support for tap delay programming
zynq-spi/zynq-qspi:
- Use clock framework for getting clocks
xilinx-spi:
- Fix some code issues (unused variables)
serial:
- Check return value from clock functions in pl01x
Adjust the SetTime() and GetTime() runtime services to correctly convert
the daylight saving time information when communicating with the RTC.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
U-Boot Driver Model is supposed to remove devices with either
DM_REMOVE_ACTIVE_DMA or DM_REMOVE_OS_PREPARE flags set, before exiting.
Our bootm command does that by explicitly calling calling
"dm_remove_devices_flags(DM_REMOVE_ACTIVE_ALL);" and we also disable any
USB devices.
The EFI equivalent is doing none of those at the moment. As a result
probing an fTPM driver now renders it unusable in Linux. During our
(*probe) callback we open a session with OP-TEE, which is supposed to
close with our (*remove) callback. Since the (*remove) is never called,
once we boot into Linux and try to probe the device again we are getting
a busy error response. Moreover all uclass (*preremove) functions won't
run.
So let's fix this by mimicking what bootm does and disconnect devices
when efi_exit_boot_services() is called.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Order header files according to https://www.denx.de/wiki/U-Boot/CodingStyle
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
An UEFI application may change the value of the register that gd lives in.
But some of our functions like get_ticks() access this register. So we
have to set the gd register to the U-Boot value when entering a trace
point and set it back to the application value when exiting the trace
point.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Change parameter type to avoid compilation error:
In file included from ./tools/../lib/rsa/rsa-verify.c:23:0,
from tools/lib/rsa/rsa-verify.c:1:
include/u-boot/rsa-mod-exp.h:69:18: error: unknown type name ‘u32’; did you mean ‘__u32’?
int zynq_pow_mod(u32 *keyptr, u32 *inout);
^~~
__u32
include/u-boot/rsa-mod-exp.h:69:31: error: unknown type name ‘u32’; did you mean ‘__u32’?
int zynq_pow_mod(u32 *keyptr, u32 *inout);
^~~
__u32
Fixes: 37e3a36a54 ("xilinx: zynq: Add support to secure images")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
In the International System of Units (SI) the prefix kilo is abbreviated as
'k' not 'K'. 'K' is the symbol for Kelvin.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
The sandbox is built with the SDL2 library with invokes the X11 library
which in turn calls getc(). But getc() in glibc is defined as
int getc(FILE *)
This does not match our definition.
int getc(void)
The sandbox crashes when called with parameter -l.
Rename our library symbol getc() to getchar().
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
With DM enabled the ethernet code will receive a packet, call
the push method that's set by the EFI network implementation
and then free the packet. Unfortunately the push methods only
sets a flag that the packet needs to be handled, but the code
that provides the packet to an EFI application runs after the
packet has already been freed.
To rectify this issue, adjust the push method to accept the packet
and store it in a temporary buffer. The EFI application then gets
the data copied from that buffer. This way the packet is cached
until is is needed.
The DM Ethernet stack tries to receive 32 packets at once, thus
we better allocate as many buffers as the stack.
Signed-off-by: Patrick Wildt <patrick@blueri.se>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
get_ticks does not always succeed. Sometimes it can be called before the
timer has been initialized. If it does, it returns a negative errno.
This causes the timer to appear non-monotonic, because the value will
become much smaller after the timer is initialized.
No users of get_ticks which I checked handle errors of this kind. Further,
functions like tick_to_time mangle the result of get_ticks, making it very
unlikely that one could check for an error without suggesting a patch such
as this one.
This patch panics if we ever get an error. There are two cases in which
this can occur. The first is if we couldn't find/probe the timer for some
reason. One reason for this is if the timer is not available so early. This
likely indicates misconfiguration. Another reason is that the timer has an
invalid/missing device tree binding. In this case, panicing is also
correct. The second case covers errors calling get_count. This can only
occur if the timer is missing a get_count function (or on RISC-V, but that
should be fixed soon).
Fixes: c8a7ba9e6a
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Commit fdf0819afb (rsa: fix alignment issue when getting public
exponent) changed the logic to avoid doing an 8-byte access to a
possibly-not-8-byte-aligned address.
However, using rsa_convert_big_endian is wrong: That function converts
an array of big-endian (32-bit) words with the most significant word
first (aka a BE byte array) to an array of cpu-endian words with the
least significant word first. While the exponent is indeed _stored_ as
a big-endian 64-bit word (two BE words with MSW first), we want to
extract it as a cpu-endian 64 bit word. On a little-endian host,
swapping the words and byte-swapping each 32-bit word works, because
that's the same as byte-swapping the whole 64 bit word. But on a
big-endian host, the fdt32_to_cpu are no-ops, but
rsa_convert_big_endian() still does the word-swapping, breaking
verified boot.
To fix that, while still ensuring we don't do unaligned accesses, add
a little helper that first memcpy's the bytes to a local fdt64_t, then
applies fdt64_to_cpu(). [The name is chosen based on the
[bl]eXX_to_cpup in linux/byteorder/generic.h].
Fixes: fdf0819afb ("rsa: fix alignment issue when getting public exponent")
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
The algo name should match between the FIT's signature node and the
U-Boot's control FDT.
If we do not check it, U-Boot's control FDT can expect sha512 hash but
nothing will prevent to accept image with sha1 hash if the signature is correct.
Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Binaries may be encrypted in a FIT image with AES. This
algo needs a key and an IV (Initialization Vector). The
IV is provided in a file (pointer by iv-name-hint in the
ITS file) when building the ITB file.
This commits adds provide an alternative way to manage
the IV. If the property iv-name-hint is not provided in
the ITS file, the tool mkimage will generate an random
IV and store it in the FIT image.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
We assign first_deleted = 0. There is no need to check its value without
any further assignment in between.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
