Commit Graph

8660 Commits

Author SHA1 Message Date
Graeme Russ
ed7a1b681d i386: Replace [read, write]_mmcr_[byte, word, long] with memory mapped structure
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-09-04 21:56:45 +02:00
Graeme Russ
9b32f96b5b Misc sc520 cdp fixups
Now that the PCI, SATA et al compile problems have been resolved, the
cludge that was applied to avoid them can be removed

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-09-04 21:55:57 +02:00
Graeme Russ
91ee4e183c Fixup sc520_spunk board
Primary intent is to resolve build errors for this board which has been
neglected for a very long time. I do not have one of these boards, so I
cannot test functionality

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-09-04 21:55:17 +02:00
Graeme Russ
8907b8dbc5 Misc ds1722 fixups
This patch is based on a patch submitted by Jean-Christophe PLAGNIOL-VILLARD
on 18th May 2008 as part of a general i386 / sc520 fixup which was never
applied

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-09-04 21:54:52 +02:00
Graeme Russ
a92510e7fa Misc ti_pci1410a fixups
Removed do_pinit() - now declared in cmd_pcmcia.c

Added #define CONFIG_CMD_PCMCIA around pcmcia_off() in line with other
PCMCIA drivers

signed/unsigned type fixups

Added semi-colon after default: label as required by newer gcc

The only board that appears to use this driver is the sc520_spunk which
is very old and very likely very broken anyway. I do not have one to test
whether this patch breaks anything functionaly, I have can only check
that it compiles without warning or error

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-09-04 21:54:04 +02:00
Graeme Russ
31b9ab33d9 Misc SATA fixups
Cast first parameter to sata_cpy()

In /drivers/block/ata_piix.h, ata_id_has_lba48(), ata_id_has_lba(),
ata_id_has_dma(), ata_id_u32(), ata_id_u64() are all defined in
include/libata.h which is included in ata.h which is included by all files
which include ata_piix.h (only ata_piix.c) so these definitions are
supurflous to (and conlict with) this in libata.h. Interestingly, my
compiler complains about ata_id_u64 already being defined, but not
ata_id_u32

ata_dump_id() is defined in include/libata.h and should not be static
(maybe should even use ata_dump_id() in libata.c

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-09-04 21:53:37 +02:00
Graeme Russ
d754902409 i386: Misc PCI fixups
Change PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY (Originally done in
commit ff4e66e93c, regressed by commit 6d7f610b09)

Cast PCI_ROM_ADDRESS_MASK to u32

Wrap probe_pci_video() call inside #ifdef CONFIG_VIDEO

Change call to pci_find_class() to pci_find_devices(). This is based on a
patch submitted on 1st March 2007 (Patch that fixes the compilation errors
for sc520_cdp board) by mushtaq_k

This patch requires that PCI_VIDEO_VENDOR_ID and PCI_VIDEO_DEVICE_ID be
specified in the board config file.  Dummy values have been added for the
SC520 CDP board to enable compilation, but since I do not have one of these,
I do know what the values should be

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-09-04 21:52:52 +02:00
Graeme Russ
04ff9ab158 Fix sc520 timer interrupt generation
The current implementation has the timer being started before the interrupt
handler is installed. It the interrupt occurs before the handler is
installed, the timer interrupt is never reset and the timer stops

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-09-04 21:51:56 +02:00
Graeme Russ
f3a8d6b29b Fix environment configuration for eNET board
The current configuration of the Environment has the redundant copy of the
environment in the Boot Flash - This was never the intent. The Environment
should instead be in the first two sectors of the first Strata Flash

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-09-04 21:51:22 +02:00
Graeme Russ
ea0c37798c i386: Fix regression introduced by commit 8c63d47651
A local variable was deleted that should not have been

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-09-04 21:50:18 +02:00
Graeme Russ
cfb3a736ff i386: Change inline asm global symbols to local
gcc 4.3.2 optimiser creates multiple copies of inline asm (who knows why)
Remove use of global names for labels to prevent 'symbol already defined'
errors

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-09-04 21:49:48 +02:00
Graeme Russ
a3ab8caee6 i386: Add errno.h
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-09-04 21:49:19 +02:00
Peter Tyser
d4e8ada0f6 Consolidate arch-specific mem_malloc_init() implementations
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-09-04 21:47:07 +02:00
Peter Tyser
a483a167bc Standardize mem_malloc_init() implementation
This lays the groundwork to allow architectures to share a common
mem_malloc_init().

Note that the x86 implementation was not modified as it did not fit the
mold of all other architectures.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-09-04 21:46:32 +02:00
Peter Tyser
5e93bd1c9a Consolidate arch-specific sbrk() implementations
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-09-04 21:45:39 +02:00
Mike Frysinger
65f6f07b72 atmel_df_pow2: standalone to convert dataflashes to pow2
Atmel DataFlashes by default operate with pages that are slightly bigger
than normal binary sizes (i.e. many are 1056 byte pages rather than 1024
bytes).  However, they also have a "power of 2" mode where the pages show
up with the normal binary size.  The latter mode is required in order to
boot with a Blackfin processor, so many people wish to convert their
DataFlashes on their development systems to this mode.  This standalone
application does just that.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-04 21:31:30 +02:00
Mike Frysinger
cb95c7a935 Blackfin: cm-bf548: fix device->stdio_dev fallout
The recent 52cb4d4fb3 commit which renamed device to stdio_dev missed the
cm-bf548's video board.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-02 05:58:39 -04:00
Mike Frysinger
c7bcdde46a Blackfin: enable 64bit printf for nand
Since the NAND code now uses 64bit code, make sure we enable support for
ADI Blackfin boards in printf to avoid the warning:
nand_util.c:45:2: warning: #warning Please define CONFIG_SYS_64BIT_VSPRINTF for correct output!

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-02 05:58:39 -04:00
Mike Frysinger
9c46e71af2 Blackfin: use scratch pad for exception stack
If the memory layout pushes the stack out of the default DCPLB coverage,
the exception handler may trigger a double fault by trying to push onto
the uncovered stack.  So handle the exception stack similar to the kernel
by using the top of the scratch pad SRAM.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-02 05:58:38 -04:00
Mike Frysinger
69a25ce357 Blackfin: increase default console size
The default console size indirectly applies to length of env vars, so a
smaller length makes it hard to pass longer command lines to kernels.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-02 05:58:38 -04:00
Mike Frysinger
f541e1d6d9 Blackfin: fix debug printf modifiers
The display_global_data() function generated warnings with pretty much
every variable.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-02 05:58:38 -04:00
Harald Krapfenbauer
4640c2b869 Blackfin: cm-bf537u: new board port
The CM-BF537U is similar to the CM-BF537E module, but enough to need its
own board port.

Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-02 05:58:37 -04:00
Robin Getz
c4db335c2e Blackfin: change global data register from P5 to P3
Since the Blackfin ABI favors higher scratch registers by default, use the
last scratch register (P3) for global data rather than the first (P5).
This allows the compiler's register allocator to use higher number scratch
P registers, which in turn better matches the Blackfin instruction set,
which reduces the size of U-Boot by more than 1024 bytes...

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-02 05:14:02 -04:00
Robin Getz
574b70df03 Blackfin: enable more network commands for ADI dev boards
Add dns and ntp to default networking commands, and ask for more dhcp
options to better configure the network environment.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-02 05:14:02 -04:00
Michael Hennerich
aa7b248a05 Blackfin: bf537-stamp: comment CF-Flash Card Support better
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-02 05:14:01 -04:00
Robin Getz
69c6d268a2 Blackfin: use +(filesize) to make sure we are only doing what is necessary
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-02 04:10:30 -04:00
Wolfgang Denk
3aa8b68d80 Merge branch 'next' of ../next 2009-08-31 22:21:47 +02:00
Wolfgang Denk
3d35d87d54 Prepare 2009.08
Update CHANGELOG

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-08-31 19:57:42 +02:00
Andre Schwarz
632a6dd0b6 Add common code dir for Matrix Vision boards.
This fixes current build failure.

Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>

mvblm7.c: fix warning: implicit declaration of function
'mv_reset_environment'

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-08-31 19:55:24 +02:00
David Brownell
52f6c34c85 bugfix CONFIG_SYS_CONSOLE_INFO_QUIET
The "console: unify printing current devices" patch goofed:
CONFIG_SYS_CONSOLE_INFO_QUIET is supposed to *REMOVE* boot
time noise, not add it.  Said patch changed the #ifndefs
to #ifdef; this one restores them to the proper sense.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-08-30 21:00:21 +02:00
Timur Tabi
2d04db088e fsl: simplify the "mac id" command, improve boot-time informational message
The "mac id" command took a 4-character parameter as the identifier string.
However, for any given board, only one kind of identifier is acceptable, so it
makes no sense to ask the user to type it in.  Instead, if the user enters
"mac id", the identifier (and also the version, if it's NXID) will
automatically be set to the correct value.

Improve the message that is displayed when EEPROM is read during boot.  It now
displays "EEPROM:" and then either an error message or the EEPROM identifier
if successful.

If the identifier in EEPROM is valid, then always reject a bad CRC, even if the
CRC field has not been initialized.

Don't force the MAC address count to MAX_NUM_PORTS or less.  Forcing the value
to be changed resulting in an in-memory copy that does not match what's in
hardware, even though the user did not request that change.

Finally, always update the CRC value in the in-memory copy after any field
is changed, so that the CRC is always correct.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:52 -05:00
Poonam Aggrwal
33f3f34255 85xx: Added PCIe support for P1 P2 RDB
Call fsl_pci_init_port() to initialize all the PCIe ports on the board.

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:46 -05:00
Poonam Aggrwal
0d3d68b25a driver/fsl_pci: Add fsl_pci_init_port function to initialize a PCI controller
fsl_pci_init_port can be called from board specific PCI initialization
routines to setup the PCI (or PCIe) controller.  This will reduce code
redundancy in most of the 85xx/86xx FSL board ports that setup PCI.

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:43 -05:00
Timur Tabi
05f6f66474 85xx: Improve MPIC initialization
The MPIC initialization code for Freescale e500 CPUs was not using I/O
accessors, and it was not issuing a read-back to the MPIC after setting
mixed mode.  This may be the cause of a spurious interrupt on some systems.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:43 -05:00
Poonam Aggrwal
c17b79fbd0 85xx: Added support for P1011RDB and P2010RDB
P1011 and P2010 are single core variants of P1010 and P2020 respectively.
The board(RDB) will be same.

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:42 -05:00
Poonam Aggrwal
a713ba926b 85xx: Added single core members of FSL P1xx/P2xx processors series
P1011 - Single core variant of P1020
P2010 - Single core variant of P2020

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:41 -05:00
Poonam Aggrwal
bf488bc094 85xx: P1020RDB Support Added
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:41 -05:00
Poonam Aggrwal
3b1f243b8d 85xx: Added CONFIG_MAX_CPUS for P1020
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:41 -05:00
Mingkai Hu
76b474e2f5 85xx: Add L2SRAM Register's macro definition
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:41 -05:00
Felix Radensky
158c6724c9 85xx: Fix memory test range on MPC8536DS
With current values of CONFIG_SYS_MEMTEST_START and CONFIG_SYS_MEMTEST_END
memory test hangs if run without arguments. Set them to sane values, so
that all available 512MB of RAM excluding exception vectors at the bottom
and u-boot code and stack at the top can be tested.

Signed-off-by: Felix Radensky <felix@embedded-sol.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:40 -05:00
Kumar Gala
ef41f2a25c 85xx: Removed BEDBUG support on P1_P2_RDB
To match all other 85xx platforms we are removing BEDBUG support.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:40 -05:00
Kumar Gala
b560ab85ed 85xx: Init pci ethernet cards if we enable any on MPC8572DS
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:40 -05:00
Peter Tyser
1bb61b69f7 xes: Use proper IO access functions
Also fix some minor whitespace oddities while we're cleaning up

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:39 -05:00
Kumar Gala
ec79d33b2c 85xx: Move to a common linker script
There are really no differences between all the 85xx linker scripts so
we can just move to a single common one.  Board code is still able to
override the common one if need be.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:39 -05:00
Poonam Aggrwal
87c7661b42 85xx: Added P1020 Processor Support.
P1020 is another member of QorIQ series of processors which falls in ULE
category. It is an e500 based dual core SOC.

Being a scaled down version of P2020 it has following differences:
- 533MHz - 800MHz core frequency.
- 256Kbyte L2 cache
- Ethernet controllers with classification capabilities.
Also the SOC is pin compatible with P2020

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:39 -05:00
Poonam Aggrwal
728ece343e 85xx: Add support for P2020RDB board
The code base adds P1 & P2 RDB platforms support.
The folder and file names can cater to future SOCs of P1/P2 family.
P1 & P2 processors are 85xx platforms, part of Freescale QorIQ series.

Tested following on P2020RDB:
1. eTSECs
2. DDR, NAND, NOR, I2C.

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:38 -05:00
Poonam Aggrwal
0e870980a6 8xxx: Removed CONFIG_NUM_CPUS from 85xx/86xx
The number of CPUs are getting detected dynamically by checking the
processor SVR value.  Also removed CONFIG_NUM_CPUS references from all
the platforms with 85xx/86xx processors.

This can help to use the same u-boot image across the platforms.

Also revamped and corrected few Freescale Copyright messages.

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:38 -05:00
Poonam Aggrwal
18bacc2027 8xxx: Refactored common cpu specific code for 85xx/86xx into one file.
Removed same code pieces from cpu/mpc85xx/cpu.c and cpu/mpc86xx/cpu.c
and moved to cpu/mpc8xxx/cpu.c(new file)

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:38 -05:00
Alex Dubov
7b18c227b8 stx: create common vendor/board hierarchy for STx boards
Move files belonging to the STx boards into common vendor directory and
update the Makefile to reflect this.

Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:38 -05:00
Peter Tyser
bafdf9aa9d 85xx: Remove unused CONFIG_CLEAR_LAW0 defines
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:37 -05:00