Commit Graph

45001 Commits

Author SHA1 Message Date
Patrice Chotard
b94888b4c0 drivers: phy: add generic_phy_valid() method
This allow to check if a PHY has been correctly
initialised and avoid to get access to phy struct.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-07-28 23:34:05 +02:00
Patrice Chotard
b9688df3cb drivers: phy: Set phy->dev to NULL when generic_phy_get_by_index() fails
phy->dev need to be set to NULL in case of generic_phy_get_by_index()
fails. Then phy->dev can be used to check if the phy is valid

Reported-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28 23:34:04 +02:00
Patrice Chotard
576e3cc700 usb: host: xhci-dwc3: Add dual role mode support from DT
DWC3 dual role mode is selected using DT "dr_mode"
property. If not found, DWC3 controller is configured
in HOST mode by default

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28 23:34:03 +02:00
Patrice Chotard
b7c1c7d2ba usb: host: xhci-dwc3: Convert driver to DM
Add Driver Model support with use of generic DT
compatible string "snps,dwc3"

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-28 23:34:02 +02:00
Masahiro Yamada
121a4d13e6 usb: add static to local symbols
Sparse reports "... was not declared. Should it be static?"

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-07-28 23:34:01 +02:00
Simon Glass
32ca40bf8b dm: tegra: Move nyan-big, jetson-tk1/tx1, beaver to livetree
Change these board to use a live device tree after relocation.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28 12:02:48 -06:00
Simon Glass
f6a4093ba0 fdtdec: Drop old compatible values
These are not needed now since the drivers now use driver model. Drop
them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28 12:02:48 -06:00
Simon Glass
e3f44f5c89 dm: power: Convert as3722 to driver model
Convert this PMIC driver to driver model and fix up other users. The
regulator and GPIO functions are now handled by separate drivers.

Update nyan-big to work correct. Three boards will need to be updated by
the maintainers: apalis-tk1, cei-tk1-som. Also the TODO in the code re
as3722_sd_set_voltage() needs to be completed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Jetson-TK1
Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28 12:02:47 -06:00
Simon Glass
c2012cb47c power: Add a GPIO driver for the as3722 PMIC
This pmic includes GPIOs which should have their own driver. Add
a driver to support these.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28 12:02:47 -06:00
Simon Glass
deea211aec power: Add a regulator driver for the as3722 PMIC
This pmic includes regulators which should have their own driver. Add
a driver to support these.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28 12:02:47 -06:00
Simon Glass
68f0081139 dm: tegra: pci: Convert to livetree
Update the tegra pci driver to support a live device tree. Fix the check
for nvidia,num-lanes so that an error will actually be detected.

Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28 12:02:47 -06:00
Simon Glass
49cb9308c4 dm: tegra: mmc: Convert to livetree
Update the tegra mmc driver to support a live device tree.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28 12:02:47 -06:00
Simon Glass
4b0f21cf50 dm: tegra: pwm: Convert to livetree
Update the tegra pwm driver to support a live device tree.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28 12:02:47 -06:00
Simon Glass
d8554d0853 dm: tegra: i2c: Convert to livetree
Update the tegra i2c driver to support a live device tree.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28 12:02:47 -06:00
Simon Glass
28a3e5a864 dm: tegra: spi: Convert to livetree
Update the tegra114 spi driver to support a live device tree.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28 12:02:47 -06:00
Simon Glass
5ae28c0a60 dm: tegra: usb: Convert to livetree
Update the Tegra EHCI driver to support a live device tree.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28 12:02:47 -06:00
Simon Glass
56f5c40ad9 dm: tegra: gpio: Convert to support livetree
Update the GPIO driver to support a live device tree.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28 12:02:47 -06:00
Simon Glass
e93812e81c tegra: dts: Move stdout-path to /chosen
This property should be in the /chosen node, not /aliases.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28 12:02:47 -06:00
Simon Glass
079ff3b902 dm: video: tegra124: Convert to livetree
Update these drives to support a live device tree.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28 12:02:47 -06:00
Simon Glass
000f15fa15 dm: tegra: Convert clock_decode_periph_id() to support livetree
Adjust this to take a device as a parameter instead of a node.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28 12:02:47 -06:00
Simon Glass
be7890927a dm: tegra: Convert USB setup to livetree
Adjust this code to support a live device tree. This should be implemented
as a PHY driver but that is left as an exercise for the maintainer.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28 12:02:47 -06:00
Simon Glass
66de3eee79 tegra: tegra124: Add a PMC syscon driver
The PMC can be modelled as a syscon peripheral. Add a driver for this
so that it can be accessed by drivers when needed. Enable it for tegra124
boards.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28 12:02:47 -06:00
Simon Glass
9b6b3c1b50 tegra: spl: Enable debug UART
Enable the debug UART in SPL to allow early serial output even if the
standard UART does not work (e.g. due to driver model problem).

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28 12:02:47 -06:00
Simon Glass
0f6507a7e4 dm: core: Fix up ofnode_get_addr_index() for 64-bit values
At present this function only supports 32-bit (single-cell) values. Update
it to support two-cell values also.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28 12:02:47 -06:00
Simon Glass
dcf988525f dm: core: Add ofnode_read_resource()
We sometimes need to read a resource from an arbitrary node. In any case
for consistency we should not put the live-tree switching code in
a dev_read_...() function. Update this to suit.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28 12:02:47 -06:00
Masahiro Yamada
c61d0009fe console: simplify puts()
Current puts() and putc() have similar #ifdef / if() conditionals.
Make puts() iterate over putc() to avoid code duplication.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28 12:02:47 -06:00
Masahiro Yamada
47b98ad0f6 sandbox: remove os_putc() and os_puts()
They are unused since commit d8c6fb8ced ("sandbox: Drop special
case console code for sandbox").

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
2017-07-28 12:02:47 -06:00
Masahiro Yamada
fd73621cba dm: ofnode: change return type of dev_read_prop() to opaque pointer
DT property values can be strings as well as integers.  This is why
of_get_property/fdt_getprop returns an opaque pointer.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
2017-07-28 12:02:47 -06:00
Philipp Tomsich
00b26f7cdb dm: Fix typo in include-guard for dm-structs.h
The include-guard for dm-structs.h was misspelled as __DT_STTUCTS.
Change it.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28 12:02:47 -06:00
Bin Meng
db13a768a0 cmd: scsi: Fix null pointer dereference in 'scsi reset'
During 'scsi reset', scsi_bus_reset() is called with udevice pointed
to NULL, which causes exception. As a temporary fix, disable the call
for DM SCSI for now.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28 12:02:47 -06:00
Bin Meng
9c1390d4b9 dm: ahci: Avoid scsi_scan_dev() in ahci_probe_scsi()
Running 'scsi scan' command causes scsi_scan_dev() to be called,
from which device_probe() is called and consequently AHCI driver
probe routine will be called as SCSI driver's parent, and finally
ahci_probe_scsi() calls scsi_scan_dev() again.

Remove the call to scsi_scan_dev() in ahci_probe_scsi().

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28 12:02:47 -06:00
Rob Clark
a095aadffa efi_loader: Add an EFI_CALL() macro
Rather than open-coding EFI_EXIT() + callback + EFI_ENTRY(), introduce
an EFI_CALL() macro.  This makes callbacks into UEFI world (of which
there will be more in the future) more concise and easier to locate in
the code.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2017-07-28 09:15:45 +02:00
Rob Clark
3f1aa97577 efi_loader: only evaluate EFI_EXIT()'s ret once
There are a couple spots doing things like:

   return EFI_EXIT(some_fxn(...));

which I handn't noticed before.  With addition of printing return value
in the EFI_EXIT() macro, now the fxn call was getting evaluated twice.
Which we didn't really want.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2017-07-28 09:14:01 +02:00
Rob Clark
6cfd5f133a efi_loader: add some missing breaks
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2017-07-28 09:13:17 +02:00
Kever Yang
2672233525 rockchip: puma-rk3399: remove duplicate code (merge artifact)
A few lines (defines and declarations) had been duplicated when the
puma-rk3399 board was initially merged.  This removes the duplicates
and changes the style to use local constants instead of pasted
literals.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
[fixed up commit-message & converted to use 'const u32':]
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-27 14:59:04 +02:00
Andy Yan
86b1122a84 rockchip: add u-boot specific dts for rk3036 sdk
Add this dts to enable debug uart releated devices
before relocation.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-27 14:59:04 +02:00
Andy Yan
77c17f4354 rockchip: use puts instead of printf when back to bootrom
printf will increase the code size more than 1kb, but platform
like rk3036 has no enough space for it.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-27 14:59:04 +02:00
Andy Yan
d26bfa73ed rockchip: enable SPL_LIBGENERIC for rk3036 based boards
function board_init_f_init_reserve will call memset, which
is implemented in lib, and enabled by CONFIG_SPL_LIBGENERIC_SUPPORT
in spl stage.
To reduce the code size, also enable SPL_TINY_MEMSET.
As rk3036 will return to bootrom immediately after dram
initialization, there is no need to run DM, so disable
SPL_DM_SERIAL.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-27 14:59:04 +02:00
Andy Yan
8b154ed61c rockchip: disable SPL_ARCH_MEMCPY/MEMSET for rk3036
RK3036 has no enough sapce use ARCH_MEMCPY/MEMSET in spl stage

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-27 14:59:04 +02:00
Andy Yan
7f38025824 rockchip: set malloc pool size to 0 before relocation in spl state on rk3036 based board
RK3036 only has 4kb sram, the spl code will use
3.4 ~ 3.5 kb, the last 0.5kb are used for SP and
GD, so there is no space for malloc. Also, the spl
will directly return to bootrom after dram initialized,
they never need the space for malloc.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-27 14:59:04 +02:00
Andy Yan
1fc50d727f sandbox: use CONFIG_VAL(SYS_MALLOC_F_LEN) to distinguish malloc pool size before relocation
SPL and normal u-boot stage use different malloc pool size
configuration before relocation, so use CONFIG_VAL(SYS_MALLOC_F_LEN)
to fit different boot stage.

Signed-off-by: Andy Yan <andyshrk@gmail.com>

Changes in v3:
- use CONFIG_VAL(), which suggested by Simon

Changes in v2: None

 arch/sandbox/cpu/start.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-27 14:59:04 +02:00
Andy Yan
9eea50162c microblaze: spl: configure SYS_MALLOC_F_LEN independently for SPL and full U-Boot
Some platforms have very limited SRAM to run SPL code, so there may
not be the same amount space for a malloc pool before relocation in
the SPL stage as the normal U-Boot stage.

Make SPL and (the full) U-Boot stage use independent SYS_MALLOC_F_LEN,
so the size of pre-relocation malloc pool can be configured memory
space independently.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
[fixed up commit-message:]
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-27 14:59:03 +02:00
Andy Yan
2b71d098ee powerpc: spl: configure SYS_MALLOC_F_LEN independently for SPL and full U-Boot
Some platforms have very limited SRAM to run SPL code, so there may
not be the same amount space for a malloc pool before relocation in
the SPL stage as the normal U-Boot stage.

Make SPL and (the full) U-Boot stage use independent SYS_MALLOC_F_LEN,
so the size of pre-relocation malloc pool can be configured memory
space independently.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
[fixed up commit-message:]
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-27 14:59:03 +02:00
Andy Yan
f5868a5da1 mips: spl: configure SYS_MALLOC_F_LEN independently for SPL and full U-Boot
Some platforms have very limited SRAM to run SPL code, so there may
not be the same amount space for a malloc pool before relocation in
the SPL stage as the normal U-Boot stage.

Make SPL and (the full) U-Boot stage use independent SYS_MALLOC_F_LEN,
so the size of pre-relocation malloc pool can be configured memory
space independently.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
[fixed up commit-message:]
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-27 14:59:03 +02:00
Andy Yan
f1896c45cb spl: make SPL and normal u-boot stage use independent SYS_MALLOC_F_LEN
Some platforms have very limited SRAM to run SPL code, so there may
not be the same amount space for a malloc pool before relocation in
the SPL stage as the normal U-Boot stage.

Make SPL and (the full) U-Boot stage use independent SYS_MALLOC_F_LEN,
so the size of pre-relocation malloc pool can be configured memory
space independently.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
[fixed up commit-message:]
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-27 14:59:03 +02:00
Leo Wen
a1903c18db rockchip: firefly: Add "usb start" to auto-start USB device
Add "preboot=usb start" to ROCKCHIP_DEVICE_SETTINGS,you don't
need to input "usb start" in command line of u-boot console,it
can auto-start the USB device,after that usb keyboard can work.

Signed-off-by: Leo Wen <leo.wen@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-27 14:59:03 +02:00
Leo Wen
af83064769 rockchip: firefly: Set the environment variable 'usbkbd' to the stdin
Add the 'usbkbd' environment variable to the 'stdin', the contents of
the keyboard input can be auto-displayed on the serial terminal,so
you don't need to manually set the environment variable 'stdin'.

Signed-off-by: Leo Wen <leo.wen@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-27 14:59:03 +02:00
Leo Wen
73f255b7dc rockchip: firefly: Add some macros to enable the usb keyboard
Add four macros of CONFIG_USB_KEYBOARD,CONFIG_DM_KEYBOARD,etc in the
firefly-rk3288_defconfig,can support usb keyboard device when these four
macros are enabled.

Signed-off-by: Leo Wen <leo.wen@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-27 14:59:03 +02:00
Philipp Tomsich
c0508e427f rockchip: rk3399: enable SPL_SERIAL_SUPPORT and SPL_DRIVERS_MISC_SUPPORT via Kconfig
SPL_SERIAL_SUPPORT and SPL_DRIVERS_MISC_SUPPORT were previously
enabled through rk3399_common.h.  This change implies these options
through Kconfig.

These need to always be active for the RK3399, as follows:
 - SPL_SERIAL_SUPPORT is needed to pass the SPL build
 - SPL_DRIVERS_MISC_SUPPORT is needed to pass the SPL build

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-27 14:59:02 +02:00
Romain Perier
478e6f2e94 rockchip: rk3288: Add support for drive-strength in PINCTRL
Currently, drive-strenght to 12ma are described and supposed to be used
on RK3288. However, the pinctrl driver for this SoC only handles muxing
and pull up/pull down via PU/PD control registers. So complex IPs like
GMAC are working in normal ethernet 100mbps, but not at 1gbps typically.

This commit adds support for handling drive-strength of 12ma, when it's
defined in the DT.

Signed-off-by: Romain Perier <romain.perier@collabora.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-27 14:59:02 +02:00