Commit Graph

1614 Commits

Author SHA1 Message Date
Bartlomiej Sieka
e51aae3829 Prevent USB commands from working when USB is stopped. 2006-08-03 23:20:13 +02:00
Bartlomiej Sieka
7455af41d1 Add rudimentary handling of alternate settings of USB interfaces - to fix
problems with some USB storage devices. Some code readability improvements.
2006-08-02 00:54:18 +02:00
Wolfgang Denk
f3e06df7e8 Enable buffered flash writes for TQM5200 board. 2006-07-18 17:44:19 +02:00
Wolfgang Denk
ae1d7d4b2e Merge with /home/tur/proj/usb_sticks/u-boot 2006-07-14 00:48:06 +02:00
Wolfgang Denk
dbba399be0 Update CHANGELOG 2006-07-13 22:32:45 +02:00
Wolfgang Denk
cf8f60f0ea Merge with /home/mk/11-cmb1920/u-boot 2006-07-13 22:12:58 +02:00
Wolfgang Denk
d22d102808 Cleanup duplicate definitions in MCC200 config file. 2006-07-13 16:29:40 +02:00
Bartlomiej Sieka
f88a0ae6d7 Fix problems with SanDisk Corporation Cruzer Micro USB memory stick. 2006-07-13 15:32:16 +02:00
Markus Klotzbuecher
090eb73510 Add support for TQM885D board.
Patch by Martin Krause, 20 Mar 2006

Signed-off-by: Martin Krause <martin.krause@tqs.de>
2006-07-12 15:26:01 +02:00
Markus Klotzbuecher
d6cc73e4e7 Bugfix in FEC initialisation:
All MII configuration is done via FEC1 registers. But MII_SPEED was
configured according to FEC used. So if only FEC2 was used, this caused
the real MII_SPEED register in FEC1 to stay uninitalised, what lead
to "mii_send STUCK!" messages. Fix: always configure MII_SPEED on FEC1
only.
2006-07-12 09:08:36 +02:00
Markus Klotzbuecher
b02d0177c1 Support for spc1920 board.
Patch by Markus Klotzbuecher, 12 Jul 2006
2006-07-12 08:48:24 +02:00
Wolfgang Denk
87791f3bf2 MCC200 board: support console on any one of the Quad UART ports. 2006-07-11 00:23:54 +02:00
Wolfgang Denk
985b950a9b Fix error in flash protection calculation on MCC200 board. 2006-07-10 23:22:43 +02:00
Wolfgang Denk
9d40799551 Major PCMCIA Cleanup to make code better readable and maintainable.
Notes:
- Board-dependend code for RPXLITE and RPXCLASSIC-based boards
  placed to the drivers/rpx_pmcia.c file to avoid duplication.
  Same for TQM8xx-based boards (drivers/tqm8xx_pmcia.c).
- drivers/i82365.c has been split into two parts located at
  board/atc/ti113x.c and board/cpc45/pd67290.c (ATC and CPC45 are
  the only boards using CONFIG_82365).
- Changes were tested for clean build and *very* *few* boards.
2006-07-10 23:07:28 +02:00
Wolfgang Denk
a874c8c65f MCC200: map the 2nd Quad UART into the processor's address space. 2006-07-06 22:31:16 +02:00
Marian Balakowicz
edd6cf20e1 Fix timer problems on AMCC yucca board.
Set Timer Clock Select to use CPU clock as a timer input source.
2006-07-06 21:17:24 +02:00
Wolfgang Denk
caaeaf925f Bring yucca config more in line with other AMCC boards. 2006-07-05 10:42:14 +02:00
Wolfgang Denk
0095b787fe Merge with /home/m8/git/u-boot 2006-07-05 10:03:52 +02:00
Marian Balakowicz
ce05de2950 Add AMCC bamboo board to MAKEALL build script. 2006-07-04 08:47:23 +02:00
Marian Balakowicz
d19206b9a5 Fix AMCC bamboo eval board compilation errors. 2006-07-04 01:27:46 +02:00
Marian Balakowicz
fbb0b559ae Add system memory to the PCI region list for AMCC PPC44x CPUs.
Enabled it for Yucca board.
2006-07-04 00:55:47 +02:00
Marian Balakowicz
fe84b48a94 Cleanup config file and bootup output for Yucca board. 2006-07-03 23:42:36 +02:00
Wolfgang Denk
3f7a63e6a3 Fix CHANGELOG 2006-06-30 20:16:37 +02:00
Wolfgang Denk
3b5f61a025 Merge with /home/m8/git/u-boot 2006-06-30 19:32:25 +02:00
Marian Balakowicz
bba6837732 Fix CONFIG_440_GX define usage. 2006-06-30 18:35:04 +02:00
Marian Balakowicz
971a5dd11a Remove autogenerated bmp_logo.h file. 2006-06-30 18:23:06 +02:00
Marian Balakowicz
f6e5739a68 Merge: Add support for AMCC 440SPe CPU based eval board (Yucca). 2006-06-30 18:19:42 +02:00
Marian Balakowicz
6c5879f380 Add support for AMCC 440SPe CPU based eval board (Yucca). 2006-06-30 16:30:46 +02:00
Marian Balakowicz
bb105f24cc Call serial_initialize() before first debug() is used. 2006-06-30 15:27:09 +02:00
Wolfgang Denk
a63c31cff5 Cleanup trab board for GCC-4.x 2006-06-26 10:54:52 +02:00
Wolfgang Denk
f73e73ba0e Merge with /home/hs/U-Boot/u-boot-dev 2006-06-20 00:12:59 +02:00
Heiko Schocher
f5e0d03970 Add support for wrPPMC7xx/74xx boards
Patch from Richard Danter, 12 Aug 2005
2006-06-19 11:02:41 +02:00
Wolfgang Denk
8d352247ec Merge with ssh://atlas/home/wd/git/u-boot/work 2006-06-19 01:46:08 +02:00
Wolfgang Denk
a650cfa286 Merge with ssh://fifi/home/wd/git/u-boot/master 2006-06-19 01:37:03 +02:00
Wolfgang Denk
0c32d96ddd Add support for gth2 board
Patch by Thomas Lange, Aug 11 2005
2006-06-16 17:32:31 +02:00
Wolfgang Denk
c12cffc543 Add support for CONFIG_SERIAL_MULTI on MPC5xxx
Patch by Martin Krause, 8 Jun 2006

This patch supports two serial consoles on boards with
a MPC5xxx CPU. The console can be switched at runtime
by setting stdin, stdout and stderr to the desired serial
interface (serial0 or serial1). The PSCs to be used as
console port are definded by CONFIG_PSC_CONSOLE
and CONFIG_PSC_CONSOLE2.
See README.serial_multi for details.
2006-06-16 17:04:45 +02:00
Wolfgang Denk
30a43cc2ae Bugfix in I2C initialisation on S3C2400.
If the bus is blocked because of a previously interrupted
transfer, up to eleven clocks are generated on the I2CSCL
line to complete the transfer and to free the bus.
With this fix pin I2CSCL (PG6) is really configured as GPIO
so the clock pulses are really generated.
Patch by Martin Krause, 04 Apr 2006
2006-06-16 16:57:18 +02:00
Wolfgang Denk
10af6d53bc Fix DDR6 errata on TQM834x boards
Patch by Thomas Waehner, 07 Mar 2006
2006-06-16 16:53:06 +02:00
Wolfgang Denk
14d9ab351c Remove obsolete flash driver board/tqm5200/flash.c
Patch by Martin Krause, 11 Jan 2006
2006-06-16 16:50:42 +02:00
Wolfgang Denk
1ac7e17e86 Update configuration for CMC-PU2 board
Patch by Martin Krause, 17 Nov 2005
2006-06-16 16:43:33 +02:00
Wolfgang Denk
bc8bb6d458 Add support for PS/2 keyboard on TQM85xx board
Patch by Martin Krause, 07 Nov 2005

Tested on a STK85XX baseboard. Make sure the PS/2 controller
has been programmed. Jumper Settings: X66 1-2, 9-10; X61 2-3
2006-06-16 16:40:54 +02:00
Wolfgang Denk
cebd1fcec0 Fix TRAB channel switching delay for trab_fkt.bin standalone applikation
Patch by Martin Krause, 08 Nov 2005

In tsc2000_read_channel() the delay after setting the multiplexer
to a temperature channel is increased from 1,5 ms to 10 ms. This
is to allow the multiplexer inputs to stabilize after huge steps
of the input signal level.
2006-06-16 16:14:28 +02:00
Wolfgang Denk
cd65a3dc87 Adjust TQM5200 make targets
Make the automatic CS configuration the default.
The dedicated configurations CONFIG_TQM5200_AA, CONFIG_TQM5200_AB
and CONFIG_TQM5200_AC are removed.
"TQM5200_config" is now the default for STK52XX.200 base boards.
On a STK52XX.100 base board "TQM5200_STK100_config" must be used.
Patch by Martin Krause, 07 Nov 2005
2006-06-16 16:11:34 +02:00
Wolfgang Denk
4bdb53cafb Fix setting of environment variable "ver" on trab board
The environment variable "ver" is now set before
do_auto_update() is called, so that "ver" can be used
in USB update scripts.
Patch by Martin Krause, 27 Oct 2005
2006-06-16 15:56:12 +02:00
Wolfgang Denk
b9fff8ee83 Fix wrong usage of udelay() in led_blink() on trab board
Patch by Martin Krause, 27 Oct 2005
2006-06-16 15:52:58 +02:00
Wolfgang Denk
3e9a299231 Fix udelay bug in vfd.c for trab board
Patch by Martin Krause, 27 Oct 2005
2006-06-16 15:47:05 +02:00
Wolfgang Denk
e00f41eb81 Disable JFFS2 support for trab board
Patch by Martin Krause, 27 Oct 2005
2006-06-16 15:45:03 +02:00
Wolfgang Denk
3332240318 Change mtdparts definition on trab board to match current flash map
Patch by Martin Krause, 27 Oct 2005
2006-06-16 15:40:48 +02:00
Wolfgang Denk
9e18a4bc6c Fix memory init problems on MCC200 board 2006-06-14 16:48:18 +02:00
Stefan Roese
df02bd1b3f Fix IxEthDB.h to compile again
Patch by Stefan Roese, 14 Jun 2006
2006-06-14 10:18:39 +02:00