Commit Graph

904 Commits

Author SHA1 Message Date
Igor Opaniuk
fc1fe01b08 avb: add support for named persistent values
AVB 2.0 spec. revision 1.1 introduces support for named persistent values
that must be tamper evident and allows AVB to store arbitrary key-value
pairs [1].

Introduce implementation of two additional AVB operations
read_persistent_value()/write_persistent_value() for retrieving/storing
named persistent values.

Correspondent pull request in the OP-TEE OS project repo [2].

[1]: https://android.googlesource.com/platform/external/avb/+/android-9.0.0_r22
[2]: https://github.com/OP-TEE/optee_os/pull/2699

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
2019-04-26 18:58:22 -04:00
Patrice Chotard
ee8a4a3f9d cmd: pxe: Display splashscreen from extlinux.conf input
The objective is to provide a simple way to retrieve a BMP file,
and display it as splashscreen, from extlinux.conf file input.

For this, we take example on https://www.syslinux.org/wiki/
index.php?title=Menu#The_advanced_menu_system
and more particularly on MENU BACKGROUND chapter.
For this, add "menu background" support in pxe command.

As example, extlinux.conf content will look like:

# Generic Distro Configuration file generated by OpenEmbedded
menu title Select the boot mode
TIMEOUT 20
menu background ../splash.bmp
DEFAULT stm32mp157c-ev1-sdcard
LABEL stm32mp157c-ev1-sdcard
	KERNEL /uImage
	FDT /stm32mp157c-ev1.dtb
	APPEND root=/dev/mmcblk0p6 rootwait rw earlyprintk console=ttySTM0,115200

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-26 17:51:51 -04:00
Tom Rini
1c64692df2 Merge branch 'master' of git://git.denx.de/u-boot-socfpga 2019-04-26 13:49:58 -04:00
Simon Goldschmidt
bbecfd4cf2 Revert "cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPAT"
This reverts commit 65a97e7fcf.

The 'eeprom' command has been converted to work with DM_I2C in a patch
submitted around the same time as this commit:
commit 0c07a9b407 ("eeprom: Add device model based I2C support to eeprom command")

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
2019-04-25 00:00:49 +02:00
Simon Goldschmidt
4f25617758 eeprom: fix DM_I2C support without CONFIG_SYS_I2C_EEPROM_BUS
The current device model enabled eeprom code only works if
CONFIG_SYS_I2C_EEPROM_BUS is set.

This patch makes it work without that define so that the bus
number passed to 'eeprom_init' is used.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2019-04-25 00:00:49 +02:00
Tom Rini
7d99406742 Various minor sandbox iumprovements
Fixes for tracing with sandbox
 Refactoring for boot_get_fdt()
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAlzAfvkACgkQfxc6PpAI
 reYu9AgAjaFmydXjE8DxkSB3rR7DHZFTs1erVKAAL2v+Tdf7LDmz+j6u1M3v55WY
 6r54f/gZ1UX5TEmQgEAKLa7QvvRO/lNvSGQnLHhZhv2IVWo7uWCKAUPdQ6XVZnUK
 zO5v+ucs9Ne4HxQJHMC509HUIIBbydiRvUm8W0SeBZy4kEyJDuub4L+rpARkXNks
 IZfKuY+VS4FK73D4M9PIhoXSubZgVS4AEcapakU1DvEz0kjsN4wr4idGrp3lutPC
 455imz83JBq2+mx1oxclOGedkIDzTCq+nWQAwSftMehrJpGrp7RLNo0v4QZZUf4V
 LIXRqObIYse9yQLkYPpeBdePMc8/tQ==
 =0NJ2
 -----END PGP SIGNATURE-----

Merge tag 'pull-24apr19' of git://git.denx.de/u-boot-dm

Various minor sandbox iumprovements
Fixes for tracing with sandbox
Refactoring for boot_get_fdt()
2019-04-24 12:27:29 -04:00
Tom Rini
180e38ad2d Pull request for UEFI sub-system for v2019.07-rc1 (3)
This patch series reworks the implementation of the `bootefi` command to
 remove code duplication by using the LoadImage() boot service to load
 binaries.
 
 Missing short texts for UEFI protocols are added for display by the
 `efidebug dh` command.
 
 Missing parameter checks for AllocatePages() and CreateDeviceNode() are
 implemented.
 
 The constants for protocol GUIDs are changed to match the names in the UEFI
 specification.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAly/PhwACgkQxIHbvCwF
 GsRlbA/+JeegsUbV0fYFvdTi4JNPRlKqkzwyo2DoWN76M2MPb+l6d4quxhOdAOaf
 3MpnCHb2z0567b7Ma5+KmAFYEBNJZrxAHthmtRnYhAbJMpE1ei6HzwJ29p+IYQKB
 usc6eOH7ybb99v0KtxLRr1CMpvxK6zud5Zxcyym5nzoAaNP4AplaQDUM1mfYOHox
 sRbEuoNpPkn50ejUtldb0Oh63vJ/bBBLojwQyGnGtBcRDf5bFehHzw5spD0oHPJv
 7E1kze2679kOEsjPa39rFhh/8YaUd+giJW137V2cyFeEyw6ydNKXuWo9Zg0ahLOy
 e+ddRjDCbi0edHbOjL6hdNTgGzdcKwy9bHqYJEacP+OLczmzimNQaALCDUzXcH1C
 lGLHrhbMpV+Do4mFIFdIqPyW+rfRDsz9Sp84Y02M6TBzCK3XPmPXDRVpiTcWmfbb
 ixD4HSQjvPDcmm98iJQIZrfcasnWbBInITqcGDDTIRg0snrYUsIoUNmQPpBDsuwD
 O1hPV8iOpFA/a/8GLJpIgta34YIPZzjlaU38c5+qV7Tsx0ODsdpTVx8JCWeJPeK+
 uhOXTWMlokgH//2ypHzIS9cUEBkoA6I9r4/fWpIjZe3iuxtV8ct2P5dHYcmrRFjY
 lF1WpX3gNeWCgPbGa3Yg/crtpVW+M6hDEgknOPqTAOTjx/g7jpg=
 =caQ+
 -----END PGP SIGNATURE-----

Merge tag 'efi-2019-07-rc1-3' of git://git.denx.de/u-boot-efi

Pull request for UEFI sub-system for v2019.07-rc1 (3)

This patch series reworks the implementation of the `bootefi` command to
remove code duplication by using the LoadImage() boot service to load
binaries.

Missing short texts for UEFI protocols are added for display by the
`efidebug dh` command.

Missing parameter checks for AllocatePages() and CreateDeviceNode() are
implemented.

The constants for protocol GUIDs are changed to match the names in the UEFI
specification.
2019-04-24 12:26:58 -04:00
Simon Glass
a24a78d7e3 Convert CONFIG_TRACE to Kconfig
This converts the following to Kconfig:
   CONFIG_TRACE

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-04-23 20:26:43 -06:00
Christoph Muellner
7ae31fccec common: command: Add command execution tracer.
When using boot scripts it can become quite hard to understand
which commands are actually executed during bootup (e.g. where
is a kernel image loaded from or which DTB is in use).

Shell scripts suffer from a similar problem and many shells address
this problem with a command execution tracer (e.g. BASH has xtrace,
which can be enabled by "set -x").

This patch introduces a command tracer for U-Boot, which prints
every command with its arguments before it is executed.

Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-04-23 20:26:43 -06:00
Heinrich Schuchardt
6182495e10 efi_loader: need either ACPI table or device tree
The EBBR specification prescribes that we should have either an ACPI table
or a device tree but not both. Let us enforce this condition in the
`bootefi` command.

If the bootefi command is called without a device tree parameter use a
previously device tree or fall back to the internal device tree.

The fdt unit test should not be run on boards with an ACPI table.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23 00:37:28 +02:00
AKASHI Takahiro
6b95b38c41 efi_loader: rework bootmgr/bootefi using load_image API
In the current implementation, bootefi command and EFI boot manager
don't use load_image API, instead, use more primitive and internal
functions. This will introduce duplicated code and potentially
unknown bugs as well as inconsistent behaviours.

With this patch, do_efibootmgr() and do_boot_efi() are completely
overhauled and re-implemented using load_image API.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>

Use efi_root as parent handle for the loaded image.
LoadImage() should be called with BootPolicy = true by the boot manager.
Avoid duplicate free_pool().
Eliminate variable memdp which is not needed after anymore due to
"efi_loader: correctly split device path of loaded image".

Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23 00:37:28 +02:00
AKASHI Takahiro
e2e4098e1b cmd: bootefi: carve out do_bootefi_image() from do_bootefi()
This is a preparatory patch for reworking do_bootefi() in later patch.
All the non-boot-manager-based (that is, bootefi <addr>) code is put
into one function, do_bootefi_image().

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23 00:37:28 +02:00
AKASHI Takahiro
d6b21894d4 cmd: bootefi: carve out bootmgr code from do_bootefi()
This is a preparatory patch for reworking do_bootefi() in later patch.
do_bootmgr_exec() is renamed to do_efibootmgr() as we put all the necessary
code into this function.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23 00:37:28 +02:00
AKASHI Takahiro
cc999d58e3 cmd: bootefi: move do_bootefi_bootmgr_exec() forward
This is a preparatory patch for reworking do_bootefi() in later patch.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23 00:37:28 +02:00
AKASHI Takahiro
3fc2b16335 cmd: bootefi: carve out efi_selftest code from do_bootefi()
This is a preparatory patch for reworking do_bootefi() in later patch.

Efi_selftest code is unusual in terms of execution path in do_bootefi(),
which make that function complicated and hard to understand. With this
patch, all efi_selftest related code will be put in a separate function.

The change also includes expanding efi_run_prepare() and efi_run_finish()
in do_bootefi_exec().

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23 00:37:28 +02:00
AKASHI Takahiro
3ffc52fd23 cmd: bootefi: merge efi_install_fdt() and efi_process_fdt()
This is a preparatory patch for reworking do_bootefi() in later patch.
For simplicity, merge two functions.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>

Return error code of efi_install_configuration_table() when aborting from
efi_install_fdt().

Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23 00:37:28 +02:00
AKASHI Takahiro
e878e6a7da cmd: bootefi: carve out fdt handling from do_bootefi()
This is a preparatory patch for reworking do_bootefi() in later patch.

Carve out a function to handle the installation of the device tree
as a configuration table in system table.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23 00:37:27 +02:00
AKASHI Takahiro
defa7b8edd cmd: bootefi: rework set_load_options()
set_load_options() can fail, so it should return error code to stop
invoking an image.
In addition, set_load_options() now takes a handle, instead of
loaded_image_info, to utilize efi_load_image() in a later patch.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23 00:37:27 +02:00
Heinrich Schuchardt
391bc8a938 efi_loader: more short texts for protocols in efidebug
The `efidebug dh` command shows handles and the installed protocols. For
most of the protocols implemented by U-Boot a short text was shown. But for
some only the GUID was displayed.

Provide the missing short texts for the following protocols: HII String,
HII Database, HII Config Routing, Simple Network, PXE Base Code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23 00:37:27 +02:00
Heinrich Schuchardt
dec88e41e0 efi_loader: consistent naming of protocol GUIDs
We should consistently use the same name for protocol GUIDs as defined in
the UEFI specification. Not adhering to this rule has led to duplicate
definitions for the EFI_LOADED_IMAGE_PROTOCOL_GUID.

Adjust misnamed protocol GUIDs.

Adjust the text for the graphics output protocol in the output of the
`efidebug dh` command.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23 00:37:27 +02:00
Tien Fong Chee
3695ea5deb cmd: ximg.c: Add support for getting external data address and length
This function supports getting both data address and length for
existing FIT subimage and FIT external data.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2019-04-22 18:13:22 -04:00
Heinrich Schuchardt
dab8788a8c cmd: add exception command
The 'exception' command allows to test exception handling.

This implementation supports ARM, x86, RISC-V and the following exceptions:
* 'breakpoint' - prefetch abort exception (ARM 32bit only)
* 'unaligned'  - data abort exception (ARM only)
* 'undefined'  - undefined instruction exception

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-22 12:06:39 -04:00
Patrick Delaunay
85d0aec0fd usb: reload watchdog during ums command
Reload the watchdog in the mass storage command ums
to avoid reboot during the usb waiting loop
when the host doesn't send any request.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-21 10:26:52 +02:00
Andy Shevchenko
cbc1081da0 dfu: Avoid declaring unused variables and absent parameters
The compiler is not happy when neither USB nor TFTP transport for DFU defined:

cmd/dfu.c: In function ‘do_dfu’:
cmd/dfu.c:31:8: warning: unused variable ‘devstring’ [-Wunused-variable]
  char *devstring = argv[3];
        ^~~~~~~~~
cmd/dfu.c:30:8: warning: unused variable ‘interface’ [-Wunused-variable]
    char *interface = argv[2];
          ^~~~~~~~~

Surround those variables by #ifdef expression.

More serious, that comes under same circumstances, is a compilation error due
to absence of macro parameter:

In file included from include/image.h:45,
                 from include/common.h:35,
                 from cmd/dfu.c:13:
include/command.h:207:24: error: expected expression before ‘,’ token
 # define _CMD_HELP(x) x,
                        ^
include/command.h:286:18: note: in expansion of macro ‘_CMD_HELP’
    _cmd, _usage, _CMD_HELP(_help) _CMD_COMPLETE(_comp) }
                  ^~~~~~~~~
include/command.h:290:3: note: in expansion of macro ‘U_BOOT_CMD_MKENT_COMPLETE’
   U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, \
   ^~~~~~~~~~~~~~~~~~~~~~~~~
include/command.h:332:2: note: in expansion of macro ‘U_BOOT_CMD_COMPLETE’
  U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help, NULL)
  ^~~~~~~~~~~~~~~~~~~
cmd/dfu.c:70:1: note: in expansion of macro ‘U_BOOT_CMD’
 U_BOOT_CMD(dfu, CONFIG_SYS_MAXARGS, 1, do_dfu,
 ^~~~~~~~~~
make[1]: *** [scripts/Makefile.build:279: cmd/dfu.o] Error 1
make: *** [Makefile:1518: cmd] Error 2

Put empty string unconditionally to have macro parameter present.

Fixes: 0f44d33536 ("dfu: Fix up the Kconfig mess")
Cc: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Lukasz Majewski <lukma@denx.de>
2019-04-21 10:26:51 +02:00
Tom Rini
14b8c420b8 Xilinx/FPGA changes for v2019.07
fpga:
 - Add support for external data in FIT
 - Extend testing for external data case
 - Inform user about a need to run post config on Zynq
 
 arm:
 - Tune zynq command functions
 - Fix internal variable setting
 
 arm64:
 - Add support for zc39dr decoding
 - Disable WDT for zcu100
 - Small changes in reset_reason()
 - Some DT changes (spi)
 - Tune qspi-mini configuration
 - Remove useless eeprom setting
 - Fix two sdhci boot case
 
 spi:
 - Fix tap delay programming
 
 clk:
 - Enable i2c in SPL
 
 net:
 - Fix gem phydev handling
 - Remove phy detection code from gem driver
 
 general:
 - Correct EXT_DTB usage for MULTI_DTB_FIT configuration
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAly262oACgkQykllyylKDCH44gCbBnuxUH6ZF0B7Leuee4te7C59
 LmUAn14/bbtMt17zkMSADCjY9yGWF4au
 =mWrW
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2019.07' of git://git.denx.de/u-boot-microblaze

Xilinx/FPGA changes for v2019.07

fpga:
- Add support for external data in FIT
- Extend testing for external data case
- Inform user about a need to run post config on Zynq

arm:
- Tune zynq command functions
- Fix internal variable setting

arm64:
- Add support for zc39dr decoding
- Disable WDT for zcu100
- Small changes in reset_reason()
- Some DT changes (spi)
- Tune qspi-mini configuration
- Remove useless eeprom setting
- Fix two sdhci boot case

spi:
- Fix tap delay programming

clk:
- Enable i2c in SPL

net:
- Fix gem phydev handling
- Remove phy detection code from gem driver

general:
- Correct EXT_DTB usage for MULTI_DTB_FIT configuration
2019-04-17 09:19:13 -04:00
Tien Fong Chee
9184c92f46 fpga: Add support for getting external data address and length
This function supports getting both data address and length for
existing FPGA subimage and FPGA external data.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16 11:51:33 +02:00
Tom Rini
38f94d3539 Pull request for UEFI sub-system for v2019.07-rc1 (2)
In the aarch64 crash dump information about the loaded EFI images is added.
 
 In README.uefi the development target is for the UEFI subsystem is
 described as "Embedded Base Boot Requirements (EBBR) Specification"
 compliance.
 
 Several bug fixes are supplied.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAlyyzHEACgkQxIHbvCwF
 GsS+9Q/9HahVvxHFljI8ymxznml7AlFCrxWwcVo5HhftbGuQIgF3NMXRlsxmsSPM
 Z+Cc3EFni4EWWWe9yDMLqXV4NCd6bnfWYWP4UvbqAKCfeX8jScRyMypPnxZ3rNrg
 oe/8zDT9qXQnEah4sB+AQhar2VRTS1p97wKDObt3mj9c2g5pGL1zdejS/4SfnCd0
 a1BymV7p7fpykDjW8S0GQM56QAkbB9CJ4Q7nlPCDlspqJlQB318lWs46FfUn2Aue
 DNLm0uscrMZtEr/aAdT+r/96GIq4AVkexy7b5MZ0v/NDNAtmIqO1ORUmLSNSDfcM
 /cbtxq53VbeztMzMoYDdU0zNR//N4dL3GbSRKJulksvxeIExCp3dRV7gfTOwWq7J
 Lg/b43WJI1f2vgXDgEPddTO3E3SPjCGQcnCNOcVNNfTkyrtVaCmRYh69lV2BpKKF
 oQCYQyzS8yYLxj16YXixK9seyQYxh/vPYVT78ed5A8B1dmyxSQMnEJjY93jngj1g
 k5DRH9nnx12aeEqkhsWvVdHT0OBNj/+oZlzT3KGDcxhrDeZXAgqxAO1oPG85Wqnx
 kPeadyVD0T5Dd8fpMqF+tToB+GCbvyUVJsVlNqDSC7NslJ3AbxBKNDuEsMJlXgwL
 Yh4/lusg/YXzZ4ACWHgUnckZDVZGNj+58QRgEU+3mZinMjDS38E=
 =QdJl
 -----END PGP SIGNATURE-----

Merge tag 'efi-2019-07-rc1-2' of git://git.denx.de/u-boot-efi

Pull request for UEFI sub-system for v2019.07-rc1 (2)

In the aarch64 crash dump information about the loaded EFI images is added.

In README.uefi the development target is for the UEFI subsystem is
described as "Embedded Base Boot Requirements (EBBR) Specification"
compliance.

Several bug fixes are supplied.
2019-04-15 07:30:25 -04:00
Tom Rini
216800acf1 Merge branch 'master' of git://git.denx.de/u-boot-spi
Conflicts:
	arch/arm/dts/armada-385-amc.dts
	arch/arm/dts/armada-xp-theadorable.dts
	arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-14 00:03:06 -04:00
Ilias Apalodimas
29361ec473 Change FDT memory type from runtime data to boot services data
Following Ard's suggestion:
Runtime data sections are intended for data that is used by the runtime
services implementation.
Let's change the type to EFI_BOOT_SERVICES_DATA.

This also fixes booting of armv7 using efi and fdtcontroladdr.

Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-12 22:00:42 +02:00
Patrick Delaunay
b0cc1b846f dm: spi: Read default speed and mode values from DT
This patch update the behavior introduced by
commit 96907c0fe5 ("dm: spi: Read default speed and mode values from DT")

In case of DT boot, don't read default speed and mode for SPI from
CONFIG_* but instead read from DT node. This will make sure that boards
with multiple SPI/QSPI controllers can be probed at different
bus frequencies and SPI modes.

Remove also use in boards of the value speed=0 (no more supported)
for ENV in SPI by using CONFIG_ENV_SPI_MAX_HZ=0.

DT values will be always used when available (full DM support of
SPI slave with available DT node) even if speed and mode are requested;
for example in splash screen support (in splash_sf_read_raw)
or in SPL boot (in spl_spi_load_image).
The caller of spi_get_bus_and_cs() no more need to force speed=0.

But the current behavior don't change if the SPI slave is not
present (device with generic driver is created automatically)
or if platdata is used (CONFIG_OF_PLATDATA).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-12 11:54:50 +05:30
Michael Walle
82a00be353 cmd: add wdt command
Add a command to control the watchdog devices. This is useful if the
watchdog is rather long running (eg. seconds) and it should be
controlled by scripts. It is also handy during debugging.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-12 07:04:18 +02:00
Tom Rini
02f173ca15 Merge branch 'master' of git://git.denx.de/u-boot-usb 2019-04-11 14:29:37 -04:00
Jean-Jacques Hiblot
aaa12157c7 fs: Add a new command to create symbolic links
The command line is:
ln <interface> <dev[:part]> target linkname

Currently symbolic links are supported only in ext4 and only if the option
CMD_EXT4_WRITE is enabled.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-09 20:04:03 -04:00
Ismael Luceno Cortes
51f60a89b7 usb: Make portspeed return a read-only string
Current code is plain wrong, and there's no need to have a mutable string,
so fix function type and remove the intermediate variable.

Signed-off-by: Ismael Luceno <ismael.luceno@silicon-gears.com>
2019-04-09 13:11:45 +02:00
Patrick Delaunay
c95e632de4 Convert CONFIG_DEFAULT_SPI_* to Kconfig
This converts the following to Kconfig:
   CONFIG_DEFAULT_SPI_BUS
   CONFIG_DEFAULT_SPI_MODE

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25 17:36:53 -04:00
Heinrich Schuchardt
1fd7a47641 efi_loader: memory leak in efi_dump_single_var()
A misplaced return statement lead to a memory leak in
efi_dump_single_var().

Reported-by: Coverity (CID 185829)
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-03-20 18:16:53 +01:00
Sean Nyekjaer
731785df0b cmd: fastboot: handle watchdog while waiting for fastboot commands.
Watchdog is not handled while waiting for fastboot commands.

Tested on a i.MX6 ULL EVK board.

Signed-off-by: Sean Nyekjaer <sean@geanix.com>
2019-03-16 13:29:43 +01:00
Vagrant Cascadian
c8087f67f1 cmd: thordown: Fix spelling of download.
Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-03-08 11:31:44 -05:00
Heinrich Schuchardt
1fa442ed43 efi_loader: error handling for efidebug boot add
In  `efidebug boot add iPXE scsi 0:1 snp-arm64.efi --foo` a parameter is
missing. Hence the command should not silently return as if everything were
ok but should display the usage info.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
2019-03-02 23:34:26 +01:00
AKASHI Takahiro
00358bb804 cmd: efidebug: add memmap command
"memmap" command prints uefi-specific memory map information.
=> efi memmap
Type             Start            End              Attributes
================ ================ ================ ==========
CONVENTIONAL     0000000040000000-000000007de27000 WB
RUNTIME DATA     000000007de27000-000000007de28000 WB|RT
RESERVED         000000007de28000-000000007de2a000 WB
RUNTIME DATA     000000007de2a000-000000007de2b000 WB|RT
RESERVED         000000007de2b000-000000007de2c000 WB
RUNTIME DATA     000000007de2c000-000000007de2d000 WB|RT
LOADER DATA      000000007de2d000-000000007ff37000 WB
RUNTIME CODE     000000007ff37000-000000007ff38000 WB|RT
LOADER DATA      000000007ff38000-0000000080000000 WB

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-25 12:47:13 +01:00
AKASHI Takahiro
fa5367342a cmd: efidebug: add images command
"images" command prints loaded images-related information.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-25 12:47:13 +01:00
AKASHI Takahiro
a80146205d cmd: efidebug: add dh command
"dh" command prints all the uefi handles used in the system.

=> efi dh
        7ef3bfa0: Device Path, Device Path To Text, Device Path Utilities,
		  Unicode Collation 2
        7ef31d30: Driver Binding
        7ef31da0: Simple Text Output
        7ef31e10: Simple Text Input, Simple Text Input Ex
        7ef3cca0: Block IO, Device Path
        7ef3d070: Block IO, Device Path
        7ef3d1b0: Block IO, Device Path, Simple File System
        7ef3d3e0: Block IO, Device Path, Simple File System

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-25 12:47:13 +01:00
AKASHI Takahiro
66eaf56648 cmd: efidebug: add drivers command
"drivers" command prints all the uefi drivers on the system.

=> efi drivers
Driver           Name                 Image Path
================ ==================== ====================
000000007ef003d0 <NULL>               <built-in>

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-25 12:47:13 +01:00
AKASHI Takahiro
355cdb5a72 cmd: efidebug: add devices command
"devices" command prints all the uefi variables on the system.

=> efi devices
Scanning disk ahci_scsi.id0lun0...
Scanning disk ahci_scsi.id1lun0...
Found 4 disks
Device           Device Path
================ ====================
000000007ef07ea0 /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)
000000007ef00c10 /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/Scsi(0,0)
000000007ef00dd0 /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/Scsi(1,0)
000000007ef07be0 /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/Scsi(1,0)/HD(1,MBR,0x086246ba,0x800,0x40000)
000000007ef07510 /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/Scsi(1,0)/HD(2,MBR,0x086246ba,0x40800,0x3f800)

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-25 12:47:13 +01:00
AKASHI Takahiro
59df7e7e77 cmd: add efidebug command
Currently, there is no easy way to add or modify UEFI variables.
In particular, bootmgr supports BootOrder/BootXXXX variables, it is
quite hard to define them as u-boot variables because they are represented
in a complicated and encoded format.

The new command, efidebug, helps address these issues and give us
more friendly interfaces:
 * efidebug boot add: add BootXXXX variable
 * efidebug boot rm: remove BootXXXX variable
 * efidebug boot dump: display all BootXXXX variables
 * efidebug boot next: set BootNext variable
 * efidebug boot order: set/display a boot order (BootOrder)

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-25 12:47:13 +01:00
AKASHI Takahiro
49d81fdfb8 cmd: env: add "-e" option for handling UEFI variables
"env [print|set] -e" allows for handling uefi variables without
knowing details about mapping to corresponding u-boot variables.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-25 12:47:13 +01:00
Jan Kiszka
2ab6e74dbd cmd: Kconfig: LED command depends on LED subsystems
Without CONFIG_LED, we get

cmd/built-in.o: In function `show_led_state':
cmd/led.c:40: undefined reference to `led_get_state'
cmd/built-in.o: In function `do_led':
cmd/led.c:99: undefined reference to `led_get_by_label'
cmd/led.c:108: undefined reference to `led_set_state'

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2019-02-22 19:49:41 -05:00
Simon Glass
48ca690917 gpio: Use case-insentive matching on the GPIO name
Allow the 'gpio' command to match GPIO bank names regardless of the case
of each. While these are generally in upper case, it is useful to be able
to provide lower case with the command.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-20 15:25:28 +08:00
Simon Glass
b8989b537e gpio: Show inactive GPIOs when explicitly requested
At present the gpio command only shows GPIOs which are marked as in use.
This makes sense with 'gpio status' since we already have the '-a' flag
to indicate that all GPIOs should be shown. But when a particular GPIO is
requested, it seems better to always display it. At present the request is
simply ignored.

For example if GPIO a10 is not in use, then:

   > gpio status a10

shows nothing, not even the function being used for that GPIO. With this
change, it shows the pin status:

   > gpio status a10
   a10: input: 0 [ ]

Add an extra parameter for this to avoid changing the existing flag
parameter.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: correct the 'gpio' command in the commit message]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-20 15:24:29 +08:00
Ismael Luceno Cortes
2d3beff2d2 cmd: pcmcia: Build only if CONFIG_CMD_PCMCIA=y
Signed-off-by: Ismael Luceno <ismael.luceno@silicon-gears.com>
2019-02-19 16:58:24 -05:00