Commit Graph

52838 Commits

Author SHA1 Message Date
Peng Fan
d1f2367f0b dt-bindings: clock: dt-bindings: pinctrl: add i.MX8QXP clocks definition
Add i.MX8QXP clocks definition

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2018-10-22 12:59:01 +02:00
Peng Fan
2cfcee82bd dt-bindings: pinctrl: add i.MX8QXP pads definition
Add i.MX8QXP pads definition

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2018-10-22 12:59:01 +02:00
Marek Vasut
39cb4f3c25 arm: mx5: Add M53Menlo board
Add Menlosystems M53 board, based on the M53 SoM.
This board has Ethernet, USB host, USB gadget, UART and LCD on it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2018-10-16 10:34:19 +02:00
Marek Vasut
ed85f77190 arm: mx5: Add LDB clock config code
Add code to configure PLL4, from which the LDB clock are directly
derived.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2018-10-16 10:34:02 +02:00
Marek Vasut
0b6b8a3a19 arm: imx: mx5: Make videoskip available on MX5
The board_video_skip() implementation in imx-common/video.c works
on i.MX5x as well, so loosen the SoC filter in Makefile to make it
available.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2018-10-16 10:33:26 +02:00
Sébastien Szymanski
2f90c62c8a ARM: opos6ul: make the board boot again
Commit 9faa43c4b5 ("ARM: dts: i.MX6UL: U-Boot specific dts for u-boot,
dm-spl") removes the u-boot,dm-spl properties from the imx6ul.dtsi file
and breaks the OPOS6UL board.
Add the u-boot,dm-spl properties into *-u-boot.dts files to make the
board boot again.

Fixes: commit 9faa43c4b5 ("ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl")
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2018-10-09 18:36:03 +02:00
Fabio Estevam
be381cc434 configs: mx7: Remove CONFIG_DBG_MONITOR
Remove all CONFIG_DBG_MONITOR references as it is not used
anywhere.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2018-10-09 18:34:13 +02:00
Fabio Estevam
787075e069 colibri_imx7: prime get_ram_size() using imx_ddr_size()
Rather than passing a hardcoded maxsize to the generic get_ram_size()
function use the i.MX 7 specific imx_ddr_size() function, which extracts
the memory size at runtime by reading the DDR controller registers.

This is a purely cosmetic change as the generic get_ram_size() function
already took care of properly automatically detecting 256MB, 512MB or 1GB
modules.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Stefan Agner <stefan.agner@toradex.com>
2018-10-09 18:33:02 +02:00
Marcel Ziswiler
2cea8d74dc imx: mx7: fix potential overflow in imx_ddr_size()
The imx_ddr_size() function may overflow as it is possible to kind of
over provision the DDR controller. Fix this by capping it to 2 GB which
is the maximum allowed size as per reference manual.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-10-09 18:32:47 +02:00
Fabio Estevam
780e31e93f pico-imx7d: Add USB Host support
USB OTG2 port is connected to the USB host connector.

Add support for it.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-10-09 18:28:06 +02:00
Fabio Estevam
4d72d3406d pico-imx7d: Make SPL binary fit into 64kB
Currently SPL binary is larger than 64kB, which is larger than
CONFIG_SPL_MAX_SIZE defined in imx7_spl.h.

This causes boot failure on the pico-mx7 targets.

Remove CONFIG_SPL_LIBDISK_SUPPORT option for now, so that the SPL
binary can fit into the 64kB range.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-10-09 18:27:47 +02:00
Otavio Salvador
c066d3cbf1 pico-imx6ul, pico-imx7d: Enable USB and PXE boot support
This allow the use of a USB storage or PXE network booting as
fallback, allowing for example for manufacturing installation of eMMC
storage in an easy way.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-10-09 18:27:20 +02:00
Otavio Salvador
6899b04cc5 pico-imx6ul, pico-imx7d: Use eMMC user partition by default
After discussing with TechNexion about how its default setting, it is
better to install on the eMMC user partition by default, when using
DFU, so it works out of box for majority of users.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-10-09 18:27:04 +02:00
Jens Wiklander
0a60a81ba3 Kconfig: sandbox: enable cmd_avb and dependencies
Enables cmd_avb and its dependencies need to run the AVB tests.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
[trini: Disable for sandbox_noblk]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-07 13:34:19 -04:00
Jens Wiklander
bbddbef998 avb_verify: support sandbox configuration
Change get_sector_buf() to use map_sysmem() to get a pointer to the
CONFIG_FASTBOOT_BUF_ADDR in memory.

Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-10-07 11:07:26 -04:00
Jens Wiklander
07cbae7672 test_avb: Update pymark.buildconfigspec information for the AVB tests
Update the pymark.buildconfigspec to depend on 'cmd_mmc' in addition to
'cmd_avb' for those tests that needs more a more complete MMC
implementation or the "mmc" command.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-10-07 11:07:26 -04:00
Jens Wiklander
6663e07478 avb_verify: support using OP-TEE TA AVB
With CONFIG_OPTEE_TA_AVB use the trusted application AVB provided by
OP-TEE to manage rollback indexes and device-lock status.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-10-07 11:07:25 -04:00
Jens Wiklander
a6ab4245d1 test: tee: test TEE uclass
Tests the TEE uclass with a sandbox tee driver.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
[trini: initialize session to 0 in dm_test_tee]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-07 11:07:05 -04:00
Jens Wiklander
eadf26f183 tee: add sandbox driver
Adds a sandbox tee driver which emulates a generic TEE with the OP-TEE
AVB TA.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Fix printf warnings in ta_avb_invoke_func, slots is uint]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-07 11:04:01 -04:00
Jens Wiklander
fe39e8e0ee sandbox: imply CONFIG_TEE (TEE uclass)
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-10-07 10:48:26 -04:00
Jens Wiklander
fa830ae1e4 sandbox: dt: add sandbox_tee node
Adds a sandbox_tee node to enable the sandbox tee driver in all the
sandbox dts files.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-10-07 10:48:26 -04:00
Jens Wiklander
1cc8cc4e67 tee: optee: support AVB trusted application
Adds configuration option OPTEE_TA_AVB and a header file describing the
interface to the Android Verified Boot 2.0 (AVB) trusted application
provided by OP-TEE.

Tested-by: Igor Opaniuk <igor.opaniuk@linaro.org>
Reviewed-by: Igor Opaniuk <igor.opaniuk@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-10-07 10:47:38 -04:00
Jens Wiklander
232cfd6d91 optee: support routing of rpmb data frames to mmc
Adds support in optee supplicant to route signed (MACed) RPMB frames
from OP-TEE Secure OS to MMC and vice versa to manipulate the RPMB
partition.

Tested-by: Igor Opaniuk <igor.opaniuk@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-10-07 10:47:38 -04:00
Jens Wiklander
7ab5630a42 arm: dt: hikey: Add optee node
Sync with 14e21cb8f811 ("arm64: dt: hikey: Add optee node"
from Linux kernel.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-10-07 10:47:38 -04:00
Jens Wiklander
1ea3fbe318 Documentation: tee uclass and op-tee driver
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-10-07 10:47:38 -04:00
Jens Wiklander
d4bd3d25d8 tee: add OP-TEE driver
Adds a OP-TEE driver.

* Targets ARM and ARM64
* Supports using any U-Boot memory as shared memory
* Probes OP-TEE version using SMCs
* Uses OPTEE message protocol version 2 to communicate with secure world

Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Igor Opaniuk <igor.opaniuk@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-10-07 10:47:38 -04:00
Jens Wiklander
53b6aac7b1 dt/bindings: add bindings for optee
Sync with c8bfafb15944 ("dt/bindings: add bindings for optee")
from Linux kernel.

Introduces linaro prefix and adds bindings for ARM TrustZone based OP-TEE
implementation.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-10-07 10:47:38 -04:00
Jens Wiklander
9ff4a31175 Add UCLASS_TEE for Trusted Execution Environment
Adds a uclass to interface with a TEE (Trusted Execution Environment).

A TEE driver is a driver that interfaces with a trusted OS running in
some secure environment, for example, TrustZone on ARM cpus, or a
separate secure co-processor etc.

The TEE subsystem can serve a TEE driver for a Global Platform compliant
TEE, but it's not limited to only Global Platform TEEs.

The over all design is based on the TEE subsystem in the Linux kernel,
tailored for U-Boot.

Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Igor Opaniuk <igor.opaniuk@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-10-07 10:47:38 -04:00
Jens Wiklander
4853ad3e13 mmc: rpmb: add mmc_rpmb_route_frames()
Adds mmc_rpmb_route_frames() to route RPMB data frames from/to an
external entity.

Tested-by: Igor Opaniuk <igor.opaniuk@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-10-07 10:47:38 -04:00
Jens Wiklander
6d89902d7a cmd: avb: print error message if command fails
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-10-07 10:47:38 -04:00
Jens Wiklander
ab2d738239 cmd: avb read_rb: print rb_idx in hexadecimal
Prior to this patch was do_avb_write_rb() reading supplied rb_idx as a
hexadecimal number while do_avb_read_rb() printed the read out rb_idx as
decimal number. For consistency change do_avb_read_rb() to print rb_idx
as a hexadecimal number too.

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Igor Opaniuk <igor.opaniuk@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-10-07 10:47:38 -04:00
Jens Wiklander
747558d014 dm: fdt: scan for devices under /firmware too
Just as /chosen may contain devices /firmware may contain devices, scan
for devices under /firmware too.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-10-07 10:47:38 -04:00
Michal Simek
51c12319b4 spl: spi: Do not hardcode fixed size for header
Find out size directly from header structure.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-06 14:09:42 -04:00
Michal Simek
83a64560dd spl: ram: Fix u_boot_pos calculation
The patch:
"spl: Weed out CONFIG_SYS_TEXT_BASE usage"
(sha1: 04ce5427bd)
introduced bug where assigning to u_boot_pos variable wasn't done
which end up in situation where SPL wasn't able to find out
image on the selected address.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-06 14:09:41 -04:00
Patrice Chotard
362612df53 mach-stm32: Set MPU SDRAM size to 512MB for STM32F7/H7
This allows to boot all STM32F7 and STM32H7 boards independently
of the amount of embedded SDRAM.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2018-10-06 14:09:41 -04:00
Heinrich Schuchardt
f105fe7bc5 fs: fat: fix set_cluster()
Avoid CoverityScan warning SIGN_EXTENSION by changing the type of
parameter size of set_cluster().

Avoid leaking stack content when writing an incomplete last sector.

Reported-by: Coverity (CID: 184096)
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-10-06 14:09:41 -04:00
Heinrich Schuchardt
0d532e911c fs: fat: memory leak in fat_unlink()
Do not leak filename_copy in case of error.
Catch out of memory when calling strdup.

Reported-by: Coverity (CID: 184086)
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-10-06 14:09:41 -04:00
Adam Ford
46580f2fd5 ARM: LogicPD: omap3logic: Remove Torpedo/SOM-LV autodection
With there now being four device tree files, and 4 separate
defconfig files, the code necessary to determine which board is
being used is no longer necessary as the corresponding pin-muxing
and board names are determined by the device tree.

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-06 14:09:40 -04:00
Adam Ford
5ad4212ce0 ARM: DTS: Add Logic PD OMAP35/DM37 SOM-LV and OMAP35 Torpedo
With the device trees doing most of the work of pin-muxing and
DM doing much of the peripheral initialization, this creates
new defconfig files for each of the Logic PD variants with
proper register settings/pin-muxing.

Signed-off-by: Adam Ford <aford173@gmail.com>
[trini: Update MAINTAINERS entry]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-06 14:09:27 -04:00
Adam Ford
e2e30f50a9 ARM: DTS: Add support for Logic PD OMAP35 Torpedo & SOM-LV
The baseboards and SOM's are virtually identical to their DM37
counterparts, but OMAP36/37 and OMAP3 have some minor register
differences.  With the boards being mostly driven by device trees
now, this synchronizes their respective device trees with linux-omap
for-next branch destined for 4.20 (or whatever the version after 4.19
will be called)

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-06 09:04:18 -04:00
Adam Ford
c981cb8dda ARM: DTS: Remove unnecessary u-boot.dtsi options from omap3/36xx
With the introduction of the omap serial driver, the need for some
of these U-Boot specific modifications is gone.  This cleans up
this unnneeded stuff.

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-06 09:04:18 -04:00
Adam Ford
87555d1415 ARM: DTS: LogicPD-SOM-LV & Torpedo: Resync DTS with Kernel
The device tree entries are from linux-omap's for-next branch
destined to me put into 4.20 (or whatever the version is after 4.19)

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-06 09:04:18 -04:00
Liviu Dudau
0fabfeb2c7 misc: Add support for the Arm Versatile Express config bus
Add support for the Arm Versatile Express config bus that is
being used for exposing various subsystems via a generic
configuration bus. This driver adds support for generating
transactions on this configuration bus and can be used by
other drivers to abstract the communication with the actual
function providers.

Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2018-10-06 09:04:18 -04:00
Simon Goldschmidt
6c6add6029 configs: drop CONFIG_SYS_EXTRA_ENV_RELOC
Instead of manually specifying CONFIG_SYS_EXTRA_ENV_RELOC
for every board that needs it, it shouldn't hurt to let
initr_reloc_global_data() always relocate gd->env_addr
unless we know this pointer is outside the initial binary.

To achieve this, the relocation is omitted if
CONFIG_ENV_ADDR is defined (and ENV_IS_EMBEDDED is not).

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2018-10-06 09:04:18 -04:00
Akashi Takahiro
c906f372b2 test/py: test_fs: add docstring comments to helper functions
After Siomon's comment, add a descriptive comment (docstring) to each of
helper functions in conftest.py. No functionality changed.

Signed-off-by: Akashi Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-10-06 09:04:18 -04:00
Akashi Takahiro
e4040df555 test/py: test_fs: remove fs_type argument from umount_fs()
Since there is no use of fs_type in umount_fs(), just remove it.

Signed-off-by: Akashi Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-10-06 09:04:18 -04:00
Stephen Warren
dddea0d0d7 test/py: ignore console read exceptions after test failure
After a test has failed, test/py drains the U-Boot console log to ensure
that any relevant output is captured. At this point, we don't care about
detecting any additional errors, since the test is already known to have
failed, and U-Boot will be restarted. To ensure that the test cleanup code
is not interrupted, and can correctly terminate the log sections for the
failed test, ignore any exception that occurs while reading the U-Boot
console output during this limited period of time.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2018-10-06 09:04:18 -04:00
Tom Rini
14573fb78f Merge branch 'master' of git://git.denx.de/u-boot-sh 2018-10-05 21:17:35 -04:00
Tom Rini
1b484736ce Merge branch 'master' of git://git.denx.de/u-boot-socfpga 2018-10-05 21:17:21 -04:00
Tom Rini
a4b38fca7e Rockchip-focused changes for v2018.11-rc2:
- fixes to rkimage for SPL boot via USB
  - fixes to make_fit_atf.py, incl. entry-point calculation and python3
    compatibility
  - OP-TEE support for ARMv7-based SoCs
  - fixes to RGMII/GMII selection on the RK3328
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJbt0FOAAoJECaAFcEOcohNZmcH/A1mKO0/R4tHCqFP2j0I+OuP
 PClkA1HUZuD5phvPMaxdHQBwsq7sAa8AljK1oPCNkslP7mFxToUUBx7xc0vB89P/
 D+XsI4uce89hIyTULR2FdhR22MOk41zaLVeNicpQ1keCNbzCwsHsHTA+B4XN/xNe
 tdPpu6wN2D+g88DAv+/ebVYgjmxRvFD4qpL9bbZpOqqA8XCcD31ukCR2E4fsESgn
 mzwKaKcX6SeYgTVCT8Q15SLTNI1WRUY1Y1laj1WKl4abY+HsTt4Whm9imM2l3K5W
 ODj6vnFlwEC9rgdxmtXGcmBfwtyXubSfuZDrMGFAiOlyIUgpPXWZI7i8LYQbZ7s=
 =NdBl
 -----END PGP SIGNATURE-----

Merge tag 'rockchip-for-v2018.11-rc2' of git://git.denx.de/u-boot-rockchip

Rockchip-focused changes for v2018.11-rc2:
 - fixes to rkimage for SPL boot via USB
 - fixes to make_fit_atf.py, incl. entry-point calculation and python3
   compatibility
 - OP-TEE support for ARMv7-based SoCs
 - fixes to RGMII/GMII selection on the RK3328

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-05 13:40:42 -04:00