Commit Graph

533 Commits

Author SHA1 Message Date
Wolfgang Denk
44a53b5743 VIDEO: better document the correct use of CONFIG_FB_ADDR
Signed-off-by: Wolfgang Denk <wd@denx.de>
cc: Anatolij Gustschin <agust@denx.de>
2013-01-14 20:16:51 +01:00
Tom Rini
7a8e739cd5 Merge branch 'master' of git://git.denx.de/u-boot-arm 2013-01-11 14:38:24 -07:00
Albert ARIBAUD
59ee45ee91 Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' 2013-01-11 18:17:33 +01:00
Javier Martinez Canillas
7de0fe1ac3 serial/ns16550: add an option to avoid hanging on broken platforms
Some platforms (e.g. IGEPv2 board) has a broken ns16550 UART that
does not set the TEMT bit when the transmitter is empty in SPL.
This makes U-Boot to hang while waiting for TEMT to be set.

Add a new option to avoid this:

CONFIG_SYS_NS16550_BROKEN_TEMT

16550 UART set the Transmitter Empty (TEMT) Bit when all output
has finished and the transmitter is totally empty. U-Boot waits
for this bit to be set to initialize the serial console. On some
broken platforms this bit is not set in SPL making U-Boot to
hang while waiting for TEMT. Define this option to avoid it.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
2013-01-10 15:09:24 -07:00
Simon Glass
15a33e49de Add option to display customised memory information
Some boards want to report more than just memory size. For example, it
might be useful to display the memory type (DDR2, DDR3) or manufacturer.

Add a weak function to support this requirement, accessed through a new
'meminfo' command.

Any example of the DRAM: output is below, just for illustration:

SMDK5250 # meminfo
DRAM:  2 GiB Elpida DDR3 @ 800MHz

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-01-10 22:22:12 +01:00
Simon Glass
e2e3e2b1be arm: Add CONFIG_DISPLAY_BOARDINFO_LATE to display board info on LCD
This option displays board info after stdio is running, so that it will
appear on the LCD. If it is displayed earlier, the board info will appear
on the serial console but not on the LCD.

Here follows a blow-by-blow description.

1a. Without CONFIG_DISPLAY_BOARDINFO_LATE, on serial:

U-Boot 2011.12-02550-g037e1c5-dirty (Nov 15 2012 - 14:29:42) for SMDK5250

CPU:   S5PC520 @ 1700MHz

Board: Google Snow, rev 0
I2C:   ready
DRAM:  2 GiB Elpida DDR3 @ 800MHz
MMC:   S5P MSHC0: 0, S5P MSHC1: 1
SF: Detected W25Q32 with page size 4 KiB, total 4 MiB
*** Warning - bad CRC, using default environment

In:    mkbp-keyb
Out:   lcd
Err:   lcd
Net:   No ethernet found.
Hit any key to stop autoboot:  0
SMDK5250 #

1b. Without CONFIG_DISPLAY_BOARDINFO_LATE, on LCD (note machine info
is missing):

In:    mkbp-keyb
Out:   lcd
Err:   lcd
Net:   No ethernet found.
Hit any key to stop autoboot:  0
SMDK5250 #

2a. With CONFIG_DISPLAY_BOARDINFO_LATE, on serial:

U-Boot 2011.12-02550-g037e1c5 (Nov 15 2012 - 14:27:40) for SMDK5250

CPU:   S5PC520 @ 1700MHz
I2C:   ready
DRAM:  2 GiB Elpida DDR3 @ 800MHz
MMC:   S5P MSHC0: 0, S5P MSHC1: 1
SF: Detected W25Q32 with page size 4 KiB, total 4 MiB
*** Warning - bad CRC, using default environment

Model: Google Snow
In:    mkbp-keyb
Out:   lcd
Err:   lcd
Net:   No ethernet found.
Hit any key to stop autoboot:  0
SMDK5250 #

2b. With CONFIG_DISPLAY_BOARDINFO_LATE, on LCD (note machine info is present):

Model: Google Snow
In:    mkbp-keyb
Out:   lcd
Err:   lcd
Net:   No ethernet found.
Hit any key to stop autoboot:  0
SMDK5250 #

Since the LCD is all that a typical user sees, it is useful to display
the model there.

We may be able to rearrange things some other way one day, but at
present this seems like a convenient way of getting the required
behaviour.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-01-10 22:22:01 +01:00
Simon Glass
b2b92f5315 Document the CONFIG_DISPLAY_BOARDINFO option
Add a short note about this in the README.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-01-10 22:21:57 +01:00
Simon Glass
06fd853890 arm: Add CONFIG_DELAY_ENVIRONMENT to delay environment loading
This option delays loading of the environment until later, so that only the
default environment will be available to U-Boot.

This can address the security risk of untrusted data being used during boot.

Any time you load untrusted data you expose yourself to a bug in the
code. The attacker gets to choose the data so can sometimes carefully
craft it to exploit a bug. We try to avoid touching user-controlled
data during a verified boot unless strictly necessary. Since the
default environment is good enough in this case (or you would just
change it), this gets around the problem by just not loading the
environment.

When CONFIG_DELAY_ENVIRONMENT is defined, it is convenient to have a
run-time way of enabling loading of the environment. Add this to the
fdt as /config/delay-environment.

Note: This patch depends on http://patchwork.ozlabs.org/patch/194342/

Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
2013-01-10 22:21:47 +01:00
Tom Rini
da77a0e593 Merge branch 'master' of git://git.denx.de/u-boot-arm 2012-12-22 05:55:19 -07:00
Simon Glass
2400727318 spi: Add SPI flash test
It is useful to have a basic SPI flash test, which tests that the SPI chip,
the SPI bus and the driver are behaving.

This test erases part of the flash, writes data and reads it back as a
sanity check that all is well.

Use CONFIG_SF_TEST to enable it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-19 15:51:57 -07:00
Allen Martin
a098cf41fd Merge remote-tracking branch 'u-boot/master' into u-boot-arm-merged
Conflicts:
	README
	arch/arm/cpu/armv7/exynos/clock.c
	board/samsung/universal_c210/universal.c
	drivers/misc/Makefile
	drivers/power/power_fsl.c
	include/configs/mx35pdk.h
	include/configs/mx53loco.h
	include/configs/seaboard.h
2012-12-19 13:02:36 -08:00
trem
d8fb710fdd powerpc: remove not used CONFIG_SYS_TFTP_LOADADDR
CONFIG_SYS_TFTP_LOADADDR is defined on severals boards,
but it's never used. So we can safely removed it.

Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr>
2012-12-15 12:28:22 -06:00
Joe Hershberger
267541f776 env: Add support for access control to .flags
Add support for read-only, write-once, and change-default.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-12-13 11:46:56 -07:00
Joe Hershberger
fffad71bc4 env: Add a command to display details about env flags
Similar to the env callback command, this will show details about the
options available, the static list, and the currently active variables.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-12-13 11:46:56 -07:00
Joe Hershberger
2598090b7e env: Add environment variable flags
Currently just validates variable types as decimal, hexidecimal,
boolean, ip address, and mac address.

If the entry is not found in the env ".flags", then look in the static
one. This allows the env to override the static definitions, but prevents
the need to have every definition in the environment distracting you.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-12-13 11:46:56 -07:00
Joe Hershberger
5e2b3e0c59 env: Add a command to view callbacks
The callbacks can be bound, but are otherwise invisible.  Add a command
to show what callbacks are available.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>

!!! fix callback command
2012-12-13 11:46:55 -07:00
Joe Hershberger
170ab11075 env: Add support for callbacks to environment vars
Add support for per-variable callbacks to the "hashtable" functions.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>

!!!fix comment in callback
2012-12-13 11:46:55 -07:00
Tom Wai-Hong Tam
735987c5a8 edid: Add I2C command for printing the EDID
Add a single command to read the EDID information over I2C.

For example:

SMDK5250 # i2c dev 7
Setting bus to 7
SMDK5250 # i2c edid 50
EDID version: 1.4
Product ID code: 305c
Manufacturer: AUO
Serial number: 00000000
Manufactured in week: 0 year: 2011
Video input definition: digital signal, voltage level 0, blank to black
Monitor is non-RGB
Maximum visible display size: 26 cm x 14 cm
Power management features: no active off, no suspend, no standby
Estabilished timings:
Standard timings:
        1366x768        60 Hz (detailed)
        1366x768        60 Hz (detailed)
Monitor ID: 2VD2K.B116XW

Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-11 13:17:35 -07:00
Simon Glass
bf36c5d521 Add hash command to perform hashing using various algorithms
This new command supports hashing SHA1 and SHA256. It could be extended
to others such as MD5 and the CRC algorithms. The syntax is modeled on
those:

   hash <algorithm> <address> <length> [*<dest_addr> | <dest_envvar>]

to calculate a hash, and:

   hash -v <algorithm> <address> <length> [*<verify_addr> | <verify_envvar>]

to verify a hash.

Use CONFIG_CMD_HASH to enable the command, CONFIG_SHA1 to enable SHA1 and
CONFIG_SHA256 to enable SHA256.

The existing sha1sum command remains.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-11 13:17:34 -07:00
Kenneth Waters
ff048ea916 Add a command to read raw blocks from a partition
Sometimes data is on a block device and within a partition, but not in a
particular filesystem.

This commands permits reading raw data from a partition.

Signed-off-by: Kenneth Waters <kwaters@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-11 13:17:33 -07:00
Anton Staaf
53fdc7ef2e Add gettime command
Gettime returns the current timer value.  If CONFIG_SYS_HZ is defined
then the timer value is also converted to seconds.

Tegra20 (SeaBoard) # gettime
Timer val: 7754
Seconds : 7
Remainder : 754
sys_hz = 1000

There has been some discussion about whether this is useful enough to
be included in U-Boot. The following boards do not have CONFIG_SYS_HZ
defined:

M52277EVB
M52277EVB_stmicro
M53017EVB
M54418TWR
M54418TWR_nand_mii
M54418TWR_nand_rmii
M54418TWR_nand_rmii_lowfreq
M54418TWR_serial_mii
M54418TWR_serial_rmii

Signed-off-by: Anton Staaf <robotboy@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-11 13:17:33 -07:00
Tom Rini
fd4d564b3c Merge branch 'master' of git://git.denx.de/u-boot-x86 2012-12-07 08:47:59 -07:00
Simon Glass
058d59b08d x86: Build vga video code only if CONFIG_VIDEO_VGA is defined
When running from coreboot we don't want this code, so make it
optional.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:44 -08:00
Gabe Black
40fef04906 Introduce arch_phys_memset which works like memset but on physical memory
The default implementation of this function is just memset, but other
implementations will be needed when physical memory isn't accessible by
U-Boot using normal addressing mechanisms.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
Signed-off-by: Che-Liang Chiou <clchiou@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:40 -08:00
Robert P. J. Day
adb9d85139 README: Explain how to generate the CHANGELOG file.
Since the top-level README file refers the reader to the CHANGELOG,
it's worth mentioning how to generate it.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2012-12-06 13:56:39 -07:00
Gabe Black
5b5ece9ef4 x86: Allow compiling out realmode/bios code
We don't want this for coreboot, so provide a way of compiling it out.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-30 13:44:04 -08:00
Gabe Black
b16f521a5e x86: Allow excluding reset vector code from u-boot
When running from coreboot we don't want this code.

This version works by ifdef-ing out all of the code that would go
into those sections and all the code that refers to it. The sections are
then empty, and the linker will either leave them empty for the loader
to ignore or remove them entirely.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-28 11:40:03 -08:00
Tom Rini
dfe161032d Merge branch 'master' of git://git.denx.de/u-boot-nand-flash 2012-11-26 14:53:33 -07:00
Karl O. Pinc
10635afa53 README: Reference nand monitor commands in U-Boot README
Reference nand monitor commands in U-Boot README

Signed-off-by: Karl O. Pinc <kop@meme.com>
2012-11-26 15:41:27 -06:00
Scott Wood
7d4b79552d spl/nand: config symbol documentation
Document parameters used for specifying the NAND image to be loaded.

Also fix the definition of CONFIG_SPL_NAND_SIMPLE -- it's only
nand_spl_simple.c, not the entire nand directory.  The word "simple" is
there for a reason.  :-)

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
v2: updated for makefile changes earlier in patchset
2012-11-26 15:41:26 -06:00
Scott Wood
6f2f01b9f3 spl/nand: introduce CONFIG_SPL_NAND_DRIVERS, _BASE, and _ECC.
Some small SPLs do not use nand_base.c, and a subset of those also
require a special driver.  Some SPLs need software ECC but others can't
fit it.

All existing boards that specify CONFIG_SPL_NAND_SUPPORT have these
symbols added to preserve existing behavior.

Signed-off-by: Scott Wood <scottwood@freescale.com>
--
v2: use positive logic for including bits of NAND, rather than
a MINIMAL symbol that excludes things.
2012-11-26 15:41:25 -06:00
Scott Wood
94a45bb197 powerpc/mpc85xx/p1_p2_rdb_pc: new SPL support
Introduces CONFIG_SPL_RELOC_TEXT_BASE and CONFIG_SPL_RELOC_STACK.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: Andy Fleming <afleming@freescale.com>
2012-11-26 15:41:25 -06:00
Scott Wood
4b919725b6 spl/powerpc: introduce CONFIG_SPL_INIT_MINIMAL
cpu_init_nand.c is renamed to spl_minimal.c as it is not really NAND-specific.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
v2: factor out START, and change cpu_init_nand.c to spl_minimal.c
Cc: Andy Fleming <afleming@freescale.com>
2012-11-26 15:41:24 -06:00
Scott Wood
ca2fca2235 spl: introduce CONFIG_SPL_TARGET
Currently the SPL target is specified in a CPU-specific makefile
fragment.  While some targets may need something more complicated than a
simple target name, targets which don't need this shouldn't have to provide a makefile fragment just for this.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
v2: Removed default target as it's been pointed out to me how existing platforms
cause the SPL to be built.
2012-11-26 15:41:21 -06:00
Gerald Van Baren
2a7abdd3d3 Merge branch 'next' 2012-11-19 19:26:35 -05:00
Simon Glass
0d89efef77 lcd: Add CONFIG_CONSOLE_SCROLL_LINES option to speed console
When the cursor position gets to the end of the LCD console we normally
scroll by one line. This adds an option to increase that value.

Console scrolling is often slow, and if a large amount of output is
being sent, increasing this option to 10 or so will speed things up
considerably.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-11-19 08:15:40 -07:00
Simon Glass
676d319ef5 lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment
The normal alignment is PAGE_SIZE, but if this is defined, we can support
other alignments.

The motivation for this change is to make the display section-aligned on
ARM so that we can easily turn off data caching for the frame buffer region
without resorting to level 2 page tables.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-11-19 08:15:38 -07:00
Gabe Black
d95f6ec733 fdt: Add option to default to most compatible conf in a fit image
When booting a fit image with multiple configurations, the user either has to
specify which configuration to use explicitly, or there has to be a default
defined which is chosen automatically. This change adds an option to change
that behavior so that a configuration can be selected explicitly, or the
configuration which has the device tree that claims to be compatible with the
earliest item in U-Boot's device tree.

In other words, if U-Boot claimed to be compatible with A, B, and then C, and
the configurations claimed to be compatible with A, D and B, D and D, E, the
first configuration, A, D, would be chosen. Both the first and second
configurations match, but the first one matches a more specific entry in
U-Boot's device tree. The order in the kernel's device tree is ignored.

Signed-off-by: Gabe Black <gabeblack@google.com>

Commit-Ready: Gabe Black <gabeblack@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-12 23:14:57 -05:00
Tom Wai-Hong Tam
45d7f52511 lcd: Implement RLE8 bitmap decoding
Add support for drawing compressed RLE8 bitmaps.

Reference: http://www.digicamsoft.com/bmp/bmp.html

Signed-off-by: Che-Liang Chiou <clchiou@chromium.org>
Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Che-Liang Chiou <clchiou@chromium.org>
[agust: fix some minor style issues and build warnings]
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2012-11-07 00:57:25 +01:00
Tom Rini
6acc7c3cbc Merge branch 'master' of git://git.denx.de/u-boot-arm 2012-11-05 07:42:00 -07:00
Albert ARIBAUD
a42c87f9d8 Merge remote-tracking branch 'u-boot-ti/master' 2012-11-03 10:05:22 +01:00
Stefan Reinauer
447c031ba4 scsi: Add function and env var to report number of scsi drives
Add a new function to find out the number of available SCSI disks. Also
set the 'scsidevs' environment variable after each scan.

Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-02 15:20:40 -07:00
Tom Rini
7e27f89fdf README: Document CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
This option is intended to be set by boards which will set the
board_name and board_rev environment variables.  These are to be used
when the U-Boot binary can support more than one board type at run-time
and the user needs an easy way (for example for scripting to determine
what device tree to load) to determine what board they are on.

Signed-off-by: Tom Rini <trini@ti.com>
2012-11-02 15:13:30 -07:00
Pali Rohár
33a35bbbe0 cfb_console: Add support for some ANSI terminal escape codes
Add optional support for some ANSI escape sequences to the
cfb_console driver. Define CONFIG_CFB_CONSOLE_ANSI to enable
cursor moving, color reverting and clearing the cfb console
via ANSI escape codes.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2012-10-30 15:28:06 -07:00
Stephen Warren
03e2ecf6b8 fs: separate CONFIG_FS_{FAT, EXT4} from CONFIG_CMD_{FAT, EXT*}
This makes the FAT and ext4 filesystem implementations build if
CONFIG_FS_{FAT,EXT4} are defined, rather than basing the build on
whether CONFIG_CMD_{FAT,EXT*} are defined. This will allow the
filesystems to be built separately from the filesystem-specific commands
that use them. This paves the way for the creation of filesystem-generic
commands that used the filesystems, without requiring the filesystem-
specific commands.

Minor documentation changes are made for this change.

The new config options are automatically selected by the old config
options to retain backwards-compatibility.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2012-10-29 14:21:19 -07:00
Wolfgang Denk
1b0757eced PPC: remove dead boards (AMX860, c2mon, ETX094, IAD210, LANTEC, SCM)
These boards have long reached EOL, and there has been no indication
of any active users of such hardware for years.  Get rid of the dead
weight.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Wolfgang Grandegger <wg@denx.de>
2012-10-28 20:17:25 +01:00
Tom Rini
c7656bab41 Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xx 2012-10-22 16:54:38 -07:00
York Sun
ffd06e0231 powerpc/mpc85xx: Rewrite spin table to comply with ePAPR v1.1
Move spin table to cached memory to comply with ePAPR v1.1.
Load R3 with 64-bit value if CONFIG_SYS_PPC64 is defined.

'M' bit is set for DDR TLB to maintain cache coherence.

See details in doc/README.mpc85xx-spin-table.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22 14:31:32 -05:00
Ashok
3bb46d23f2 README : Rename CONFIG_DRIVER_SMC91111 to CONFIG_SMC91111, CONFIG_DRIVER_LAN91C96 to CONFIG_LAN91C96
Rename CONFIG_DRIVER_SMC91111 to CONFIG_SMC91111,
CONFIG_DRIVER_LAN91C96 to CONFIG_LAN91C96

Signed-off-by: Ashok Kumar Reddy <ashokkourla2000@gmail.com>
Reviewed-by: Tom Rini <trini@ti.com>
2012-10-22 08:29:56 -07:00
Gabe Black
84cd93272e fs: Add a Coreboot Filesystem (CBFS) driver and commands
This change adds CBFS support and some commands to use it to u-boot. These
commands are:

cbfsinit - Initialize CBFS support and pull all metadata into RAM. The end of
the ROM is an optional parameter which defaults to the standard 0xffffffff and
can be used to support multiple CBFSes in a system. The last one set up with
cbfsinit is the one that will be used.

cbfsinfo - Print information from the CBFS header.

cbfsls - Print out the size, type, and name of all the files in the current
CBFS. Recognized types are translated into symbolic names.

cbfsload - Load a file from CBFS into memory. Like the similar command for fat
filesystems, you can optionally provide a maximum size.

Support for CBFS is compiled in when the CONFIG_CMD_CBFS option is specified.

The CBFS driver can also be used programmatically from within u-boot.

If u-boot needs something out of CBFS very early before the heap is
configured, it won't be able to use the normal CBFS support which caches some
information in memory it allocates from the heap. The
cbfs_file_find_uncached function searches a CBFS instance without touching
the heap.

Signed-off-by: Gabe Black <gabeblack@google.com>
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-10-22 08:29:55 -07:00