powerpc/mpc85xx/p1_p2_rdb_pc: new SPL support

Introduces CONFIG_SPL_RELOC_TEXT_BASE and CONFIG_SPL_RELOC_STACK.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: Andy Fleming <afleming@freescale.com>
This commit is contained in:
Scott Wood 2012-09-20 19:05:12 -05:00
parent c97cd1ba48
commit 94a45bb197
5 changed files with 160 additions and 5 deletions

9
README
View File

@ -2653,6 +2653,10 @@ FIT uImage format:
CONFIG_SPL_TEXT_BASE
TEXT_BASE for linking the SPL binary.
CONFIG_SPL_RELOC_TEXT_BASE
Address to relocate to. If unspecified, this is equal to
CONFIG_SPL_TEXT_BASE (i.e. no relocation is done).
CONFIG_SPL_BSS_START_ADDR
Link address for the BSS within the SPL binary.
@ -2662,6 +2666,11 @@ FIT uImage format:
CONFIG_SPL_STACK
Adress of the start of the stack SPL will use
CONFIG_SPL_RELOC_STACK
Adress of the start of the stack SPL will use after
relocation. If unspecified, this is equal to
CONFIG_SPL_STACK.
CONFIG_SYS_SPL_MALLOC_START
Starting address of the malloc pool used in SPL.

View File

@ -24,11 +24,27 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
MINIMAL=
ifdef CONFIG_SPL_BUILD
ifdef CONFIG_SPL_INIT_MINIMAL
MINIMAL=y
endif
endif
ifdef MINIMAL
COBJS-y += spl_minimal.o tlb.o law.o
else
COBJS-y += $(BOARD).o
COBJS-y += ddr.o
COBJS-y += law.o
COBJS-y += tlb.o
endif
SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS))

View File

@ -177,7 +177,7 @@ void board_gpio_init(void)
*/
setbits_be32(&pgpio->gpdir, 0x02130000);
#ifndef CONFIG_SYS_RAMBOOT
#if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SPL)
/* init DDR3 reset signal */
setbits_be32(&pgpio->gpdir, 0x00200000);
setbits_be32(&pgpio->gpodr, 0x00200000);

View File

@ -0,0 +1,131 @@
/*
* Copyright 2011 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
*
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
#include <common.h>
#include <ns16550.h>
#include <asm/io.h>
#include <nand.h>
#include <asm/fsl_law.h>
#include <asm/fsl_ddr_sdram.h>
#include <asm/global_data.h>
DECLARE_GLOBAL_DATA_PTR;
/*
* Fixed sdram init -- doesn't use serial presence detect.
*/
void sdram_init(void)
{
ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
__raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds);
__raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config);
#if CONFIG_CHIP_SELECTS_PER_CTRL > 1
__raw_writel(CONFIG_SYS_DDR_CS1_BNDS, &ddr->cs1_bnds);
__raw_writel(CONFIG_SYS_DDR_CS1_CONFIG, &ddr->cs1_config);
#endif
__raw_writel(CONFIG_SYS_DDR_TIMING_3, &ddr->timing_cfg_3);
__raw_writel(CONFIG_SYS_DDR_TIMING_0, &ddr->timing_cfg_0);
__raw_writel(CONFIG_SYS_DDR_TIMING_1, &ddr->timing_cfg_1);
__raw_writel(CONFIG_SYS_DDR_TIMING_2, &ddr->timing_cfg_2);
__raw_writel(CONFIG_SYS_DDR_CONTROL_2, &ddr->sdram_cfg_2);
__raw_writel(CONFIG_SYS_DDR_MODE_1, &ddr->sdram_mode);
__raw_writel(CONFIG_SYS_DDR_MODE_2, &ddr->sdram_mode_2);
__raw_writel(CONFIG_SYS_DDR_INTERVAL, &ddr->sdram_interval);
__raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init);
__raw_writel(CONFIG_SYS_DDR_CLK_CTRL, &ddr->sdram_clk_cntl);
__raw_writel(CONFIG_SYS_DDR_TIMING_4, &ddr->timing_cfg_4);
__raw_writel(CONFIG_SYS_DDR_TIMING_5, &ddr->timing_cfg_5);
__raw_writel(CONFIG_SYS_DDR_ZQ_CONTROL, &ddr->ddr_zq_cntl);
__raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL, &ddr->ddr_wrlvl_cntl);
/* Set, but do not enable the memory */
__raw_writel(CONFIG_SYS_DDR_CONTROL & ~SDRAM_CFG_MEM_EN, &ddr->sdram_cfg);
asm volatile("sync;isync");
udelay(500);
/* Let the controller go */
out_be32(&ddr->sdram_cfg, in_be32(&ddr->sdram_cfg) | SDRAM_CFG_MEM_EN);
set_next_law(0, CONFIG_SYS_SDRAM_SIZE_LAW, LAW_TRGT_IF_DDR_1);
}
void board_init_f(ulong bootflag)
{
u32 plat_ratio;
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
#ifndef CONFIG_QE
ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
#endif
/* initialize selected port with appropriate baud rate */
plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
plat_ratio >>= 1;
gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
gd->bus_clk / 16 / CONFIG_BAUDRATE);
puts("\nNAND boot... ");
#ifndef CONFIG_QE
/* init DDR3 reset signal */
__raw_writel(0x02000000, &pgpio->gpdir);
__raw_writel(0x00200000, &pgpio->gpodr);
__raw_writel(0x00000000, &pgpio->gpdat);
udelay(1000);
__raw_writel(0x00200000, &pgpio->gpdat);
udelay(1000);
__raw_writel(0x00000000, &pgpio->gpdir);
#endif
/* Initialize the DDR3 */
sdram_init();
/* copy code to RAM and jump to it - this should not return */
/* NOTE - code has to be copied out of NAND buffer before
* other blocks can be read.
*/
relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
}
void board_init_r(gd_t *gd, ulong dest_addr)
{
nand_boot();
}
void putc(char c)
{
if (c == '\n')
NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r');
NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c);
}
void puts(const char *str)
{
while (*str)
putc(*str++);
}

View File

@ -53,7 +53,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 1, BOOKE_PAGESZ_1M, 1),
#ifndef CONFIG_NAND_SPL
#ifndef CONFIG_SPL_BUILD
/* W**G* - Flash/promjet, localbus */
/* This will be changed to *I*G* after relocation to RAM. */
SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
@ -85,7 +85,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
SET_TLB_ENTRY(1, CONFIG_SYS_PMC_BASE, CONFIG_SYS_PMC_BASE_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 10, BOOKE_PAGESZ_64K, 1),
#endif
#endif /* not SPL */
#ifdef CONFIG_SYS_NAND_BASE
/* *I*G - NAND */
@ -94,7 +94,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
0, 7, BOOKE_PAGESZ_1M, 1),
#endif
#ifdef CONFIG_SYS_RAMBOOT
#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)
/* *I*G - eSDHC/eSPI/NAND boot */
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
@ -108,7 +108,6 @@ struct fsl_e_tlb_entry tlb_table[] = {
0, 9, BOOKE_PAGESZ_1G, 1),
#endif
#endif
};
int num_tlb_entries = ARRAY_SIZE(tlb_table);