Commit Graph

141 Commits

Author SHA1 Message Date
Simon Glass
63473ee8c5 dm: doc: Correct of-platdata driver name
Add a note about the driver name in the of-platdata documentation since
the naming must follow the compatible string.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-11-03 07:20:26 +08:00
Bin Meng
4b06000395 dm: spi: Change cs_info op to return -EINVAL for invalid cs num
We need distinguish the following two situations in various SPI APIs:

- given chip select num is invalid
- given chip select num is valid, but no device is attached

Currently -ENODEV is returned for both cases.

For the first case, it's more reasonable to return -EINVAL instead of
-ENODEV for invalid chip select numbers.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # SoPine
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-10-25 00:48:31 +05:30
Bin Meng
4dd520b36b dm: spi: Return 0 if driver does not implement ops->cs_info
If an SPI controller driver does not implement ops->cs_info, that
probably means any chip select number could be valid, hence let's
return 0 for spi_cs_info().

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # SoPine
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-10-25 00:48:31 +05:30
Ralph Siemsen
2cde3ea1d0 doc: add full path to patman README
Make it a little easier to find the documentation.

Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-10-15 08:40:02 -06:00
Simon Glass
bdaa976153 pci: Correct 'specifified' and 'Plese' typos
Fix these spelling errors the header file and documentation.

Fix a small typo in the PCI documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:42 +08:00
Simon Glass
9b69ba4a78 pci: sandbox: Move the emulators into their own node
Sandbox pci works using emulation drivers which are currently children of
the pci device:

	pci-controller {
		pci@1f,0 {
			compatible = "pci-generic";
			reg = <0xf800 0 0 0 0>;
			emul@1f,0 {
				compatible = "sandbox,swap-case";
			};
		};
	};

In this case the emulation device is attached to pci device on address
f800 (device 1f, function 0) and provides the swap-case functionality.

However this is not ideal, since every device on a PCI bus has a child
device. This is only really the case for sandbox, but we want to avoid
special-case code for sandbox.

Worse, child devices cannot be probed before their parents. This forces
us to use 'find' rather than 'get' to obtain the emulator device. In fact
the emulator devices are never probed. There is code in
sandbox_pci_emul_post_probe() which tries to track when emulators are
active, but at present this does not work.

A better approach seems to be to add a separate node elsewhere in the
device tree, an 'emulation parent'. This could be given a bogus address
(such as -1) to hide the emulators away from the 'pci' command, but it
seems better to keep it at the root node to avoid such hacks.

Then we can use a phandle to point from the device to the correct
emulator, and only on sandbox. The code to find an emulator does not
interfere with normal pci operation.

Add a new UCLASS_PCI_EMUL_PARENT uclass which allows finding an emulator
given a bus, and finding a bus given an emulator. Update the existing
device trees and the code for finding an emulator.

This brings PCI emulators more into line with I2C.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: fix 3 typos in the commit message;
        encode bus number in the labels of swap_case_emul nodes;
        mention commit 4345998ae9 in sandbox_pci_get_emul()]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:41 +08:00
Simon Glass
fdd72be486 dm: core: Add documentation on how to debug driver model
Sometimes devices don't appear and it can be confusing. Add a few notes to
help with this situation.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: fix 2 issues in the doc and include the doc in the index.rst]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:37 +08:00
Heinrich Schuchardt
282ed24fb3 dm: MIGRATION: Add migration plan for CONFIG_DM
For many sub-systems we already require the driver model to be used. Yet
there is still a handful of boards that do not have CONFIG_DM enabled.

We should make CONFIG_DM compulsory with release v2020.01

Conversion dates for CONFIG_DM_SPL and CONFIG_DM_TPL are yet to be defined.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-09-19 12:54:30 -04:00
Lukasz Majewski
5f8f46ee6a doc: fix: Replace SPL_OF_PLATDATA with OF_PLATDATA in examples
The of-plat.rst file till this change has been using

This is at best misleading as SPL_OF_PLATDATA is always defined when we
want to use this SPL tinification feature (also in U-Boot proper).
As a result the OF_PLATDATA SPL specific code is also compiled in when
U-Boot proper is build.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-09-19 12:54:28 -04:00
Jagan Teki
ce704ea11f doc: driver-model: Update SPI migration status
Update SPI drivers, driver model conversion status for
v2019.10 release.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-16 08:09:22 +05:30
Heinrich Schuchardt
2e0f324178 network: set timeline for CONFIG_DM_ETH conversion
The driver model has been supported for network drivers since 2015. It is
time to convert the remaining boards. Set July 2020 as a timeline.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-04 11:37:19 -05:00
Bin Meng
a077bae372 doc: driver-model: Convert usb-info.txt to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24 10:07:24 -04:00
Bin Meng
7ee49d03ea doc: driver-model: Convert spi-howto.txt to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24 10:07:24 -04:00
Bin Meng
c1b43906a8 doc: driver-model: Convert serial-howto.txt to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24 10:07:24 -04:00
Bin Meng
175ba0fe94 doc: driver-model: Convert remoteproc-framework.txt to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24 10:07:24 -04:00
Bin Meng
cf4747d294 doc: driver-model: Convert pmic-framework.txt to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24 10:07:24 -04:00
Bin Meng
b598648947 doc: driver-model: Convert pci-info.txt to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24 10:07:24 -04:00
Bin Meng
45dbb4dd23 doc: driver-model: Convert of-plat.txt to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24 10:07:24 -04:00
Bin Meng
6c49c22846 doc: driver-model: Convert livetree.txt to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24 10:07:24 -04:00
Bin Meng
61c3e77330 doc: driver-model: Convert i2c-howto.txt to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24 10:07:24 -04:00
Bin Meng
1be040afea doc: driver-model: Convert fs_firmware_loader.txt to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24 10:07:24 -04:00
Bin Meng
f156aae256 doc: driver-model: Convert fdt-fixup.txt to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-24 10:07:24 -04:00
Bin Meng
e1910d93b8 doc: driver-model: Convert MIGRATION.txt to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-24 10:07:24 -04:00
Bin Meng
ed205e677b doc: driver-model: Convert README.txt to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-24 10:07:24 -04:00
Bin Meng
d9756c41f9 doc: Add driver-model to Sphinx TOC tree
Add index.rst for driver model. More docs will be added later.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glkpk@gmx.de>
2019-07-24 10:07:24 -04:00
Patrick Delaunay
54e1223aa4 dm: doc: add documentation for pre-reloc properties in SPL and TPL
Add documentation for the pre-reloc property in SPL and TPL device-tree:
- u-boot,dm-pre-proper
- u-boot,dm-pre-reloc
- u-boot,dm-spl
- u-boot,dm-tpl

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-10 16:52:58 -06:00
Jagan Teki
d1505ad8c0 dm: MIGRATION: Update migration status for SPI
Now, we have few driver are fully converted into dm and few
are partially converted.

So, update the migration status accordingly.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-06-10 17:59:49 +05:30
Tien Fong Chee
c1ef736e3d misc: fs_loader: Replace label with DT phandle
In previously label which will be expanded to the node's full path was
used, and now replacing label with most commonly used DT phandle. The
codes were changed accordingly to the use of DT phandle and supporting
multiple instances.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2019-04-22 18:13:22 -04:00
Vignesh Raghavendra
61ae9782ef spi: ti_qspi: Drop non DM code
Now that all boards using TI QSPI have moved to DM and DT, drop non DM
code completely.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[jagan: update MIGRATION.txt, rebase config_whitelist.txt]
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17 17:43:19 +05:30
Simon Goldschmidt
3600b46117 of-platdata: improve documentation
Improve some things in the documentation of OF_PLATDATA that I found
while porting socfgpa_gen5 to it.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-02-09 12:50:22 -07:00
Tien Fong Chee
31a2cf1ca4 misc: fs_loader: Switching private data allocation to DM auto allocation
Switching private data manual allocation to driver model auto allocation
so users no longer need to deallocate themself because this would be
deallocated by driver model when the device is no longer required.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-15 15:28:54 -05:00
Simon Glass
3e87ffcffb dm: video: lcd: MIGRATION: Add migration plan for video
Add a migration plan for video which is an important subsystem in U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-01-09 07:13:31 -05:00
Simon Glass
1ce689d950 dm: pci: MIGRATION: Add migration plan for PCI
Add a migration plan for PCI which is an important subsystem in U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-01-09 07:13:31 -05:00
Jagan Teki
99a17dd53d dm: MIGRATION: Update migration plan for SPI
- v2019.04 for no dm conversion drivers
- v2019.07 for partially converted drivers.

Note: there were many updates on this deadline, so better
not update this again.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-01-02 01:00:31 +05:30
Tom Rini
91ff686562 blk: Rework guard around part_init call
The function part_init() will only be built when we have both
CONFIG_PARTITIONS and CONFIG_HAVE_BLOCK_DEVICE set.  Protect the call to
this function with both of these tests now.

Cc: Simon Glass <sjg@chromium.org>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Cc: Mingkai Hu <mingkai.hu@nxp.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Marek Behún <marek.behun@nic.cz>
Cc: Vanessa Maegima <vanessa.maegima@nxp.com>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Adam Ford <aford173@gmail.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Tom Warren <twarren@nvidia.com>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-12 12:14:22 -05:00
Tom Rini
9450ab2ba8 Merge branch 'master' of git://git.denx.de/u-boot-spi
- Various MTD fixes from Boris
- Zap various unused / legacy paths.
- pxa3xx NAND update from Miquel

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-12-05 15:06:24 -05:00
Tom Rini
7cfc1a381e dm: MIGRATION: Update migration plan for BLK
The biggest part of migration to using CONFIG_BLK is that we need to
have the various subsystems migrated first, so reword the plan here to
reference the new deadlines.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-12-03 19:31:13 -05:00
Tom Rini
ea9d7c17fc dm: MIGRATION: Add migration plan for CONFIG_SATA
As the core of the subsystem has been converted along with some of the
drivers, formalize a deadline for migration.

Cc: Akshay Bhat <akshaybhat@timesys.com>
Cc: Andreas Geisreiter <ageisreiter@dh-electronics.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Jason Liu <jason.hui.liu@nxp.com>
Cc: Ken Lin <Ken.Lin@advantech.com.tw>
Cc: Ludwig Zenz <lzenz@dh-electronics.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Max Krummenacher <max.krummenacher@toradex.com>
Cc: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Soeren Moch <smoch@web.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Troy Kisky <troy.kisky@boundarydevices.com>
Cc: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Cc: York Sun <york.sun@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-12-03 19:31:13 -05:00
Tom Rini
109d8bf3ac dm: MIGRATION: Add migration plan for DM_USB
As much of the USB system has been migrated to DM now, formalize a
deadline for migration.

Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-12-03 19:31:13 -05:00
Tom Rini
1cb5d5df38 dm: MIGRATION: Add migration plan for DM_MMC
Given that at this point the MMC subsystem itself has been migrated
along with a number of subsystem drivers, formalize a deadline for
migration.

Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-03 19:31:13 -05:00
Jagan Teki
fe82ca8f71 spi: Remove used spi_init
spi_init used in some areas in tree, but the respective
drivers will remove in future patches.

So remove the same instances.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-11-27 21:06:53 +05:30
Bin Meng
1a6bd4717f dm: doc: Update description of pre-relocation support
Add some description about pre-relocation driver binding, including
usage of DM_FLAG_PRE_RELOC flag and caveats.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14 09:16:28 -08:00
Marek Vasut
92ed986521 pci: Update documentation to make 'compatible' string optional
Reword the documentation to make it clear the compatible string is now
optional, yet still matching on it takes precedence over PCI IDs and
PCI classes.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-20 15:23:38 -04:00
Simon Glass
06f94461a9 fdt: Allow indicating a node is for U-Boot proper only
At present it is not possible to specify that a node should be used before
relocation (in U-Boot proper) without it also ending up in SPL and TPL
device trees. Add a new "u-boot,dm-pre-proper" boolean property for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-09 04:40:27 -06:00
Simon Glass
a15a7aa47b doc: Update docs for device tree in SPL, TPL
Make a few small updates to indicate that device tree can be used in SPL
and TPL.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-09 04:40:27 -06:00
Tien Fong Chee
45029758be doc: Add new doc for file system firmware loader driver model
Provide information about

- overview of file system firmware loader driver model
- describe storage device and partition in device tree source
- describe fie system firmware loader API

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-28 20:22:33 -04:00
Tom Rini
15416c86b4 dm: Update README.txt to clarify device tree usage
In the section about Device Trees add a paragraph at the end that
clarifies how we decide of a tree is valid or not.  We say that all
bindings must either be in the specification (link provided) or in our
device-tree-bindings directory.  We say that most of these come from the
Linux Kernel and as such some design decisions are made for us already,
but that in most cases we wish to retain compatibility.

Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-25 21:49:18 -04:00
Bin Meng
4345998ae9 pci: sandbox: Support dynamically binding device driver
At present all emulated sandbox pci devices must be present in the
device tree in order to be used. The real world pci uclass driver
supports pci device driver matching, and we should add such support
on sandbox too.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-08-08 12:49:31 +01:00
Chris Packham
09b8d67f31 doc: driver-model: Fix typo
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-26 14:18:38 -06:00
Tuomas Tynkkynen
2239690aca i2c: Drop CONFIG_SH_SH7734_I2C
Last user of this driver went away in May 2017 in commit
eb5ba3aefd ("i2c: Drop use of CONFIG_I2C_HARD").

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Acked-by: Heiko Schocher <hs@denx.de>
2018-05-23 17:30:04 -04:00