Commit Graph

2010 Commits

Author SHA1 Message Date
amartin@nvidia.com
fb3ef649ed USB: reevaluate iomux stdin on USB kbd detect
If CONSOLE_MUX is enabled, reevaluate console stdin when USB keyboard
device is detected.

Signed-off-by: Allen Martin <amartin@nvidia.com>
2012-03-03 16:56:22 +01:00
Vincent Palatin
d53da847cf usb: add numeric keypad support to HID driver
When keys are pressed on the numeric keypad, emit key codes for the numbers,
operators, dot and enter.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
2012-03-03 16:56:15 +01:00
Vincent Palatin
3d17308e40 USB: fix USB keyboard polling parameter
When doing a "GET_REPORT" request on the keyboard control endpoint,
the report ID should 0 (ie report ID not used) rather than 1
as reports are not used in boot mode.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
2012-03-03 16:56:09 +01:00
Marek Vasut
e159e4868e USB: Make struct devrequest setup_packet local
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Remy Bohmer <linux@bohmer.net>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2012-03-03 16:55:54 +01:00
Marek Vasut
23faf2bc9e USB: Separate out USB hub driver
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Remy Bohmer <linux@bohmer.net>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2012-03-03 16:55:24 +01:00
Marek Vasut
c08b1b264d USB: Staticize internal functions
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Remy Bohmer <linux@bohmer.net>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2012-03-03 16:53:48 +01:00
Wolfgang Denk
e91004201c Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
* 'master' of git://git.denx.de/u-boot-nand-flash:
  cmd_nand.c: Fix 'nand dump' after latest MTD resync
  mtd/nand:Fix wrong usage of is_blank() in fsl_ifc_run_command
  mtd/nand: Fix IFC driver to support 2K NAND page
  nand: reinstate lazy bad block scanning
  Revert "nand: make 1-bit software ECC configurable"
2012-03-03 15:15:07 +01:00
Tom Rini
cfdae12f37 cmd_nand.c: Fix 'nand dump' after latest MTD resync
With 2a8e0fc nand_do_read_ops changed in behavior slightly (keeping in sync
with the kernel which did this change in b64d39d8) such that the OOB data is
always copied into oobbuf and never appended to datbuf.  Within U-Boot only
the nand_dump function (for the dump nand subcommand) was expecting the OOB
data to only be appended to datbuf.  So we now change nand_dump to not
malloc extra space, correct the comment about datbuf and OOB data and switch
the pointer to oobbuf before printing.

Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Tom Rini <trini@ti.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2012-02-28 14:04:54 -06:00
Shawn Guo
fa34f6b25b common/image.c: align usage of fdt_high with initrd_high
The commit message of a28afca (Add uboot "fdt_high" enviroment variable)
states that fdt_high behaves similarly to the existing initrd_high.
But fdt_high actually has an outstanding difference from initrd_high.
The former specifies the start address, while the later specifies the
end address.

As fdt_high and initrd_high will likely be used together, it'd be nice
to have them behave same.  The patch changes the behavior of fdt_high
to have it aligned with initrd_high.

The document of fdt_high in README is updated with an example to
demonstrate the usage of this environment variable.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Simon Glass <sjg@chromium.org>
2012-02-27 21:19:24 +01:00
Wolfgang Denk
dbe20fc797 Merge branch 'trini@ti.com' of git://git.denx.de/u-boot-staging
* 'trini@ti.com' of git://git.denx.de/u-boot-staging:
  usb_ether: fix typo
  cmd_eeprom: typo
  doc: complete, typos
2012-02-17 23:52:52 +01:00
Peter Meerwald
e506a00691 cmd_eeprom: typo
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2012-02-14 11:02:46 -07:00
Wolfgang Denk
e9d44b35be Merge branch 'sf' of git://git.denx.de/u-boot-blackfin
* 'sf' of git://git.denx.de/u-boot-blackfin:
  README: Add description of SPI Flash (SF) command configuration
  sf command: allow default bus and chip selects
  sf: eeprom_m95xxx: set a sane default timeout
  sf: eeprom_m95xxx: fix up style
2012-02-13 23:15:25 +01:00
Eric Nelson
c1173bd075 sf command: allow default bus and chip selects
This patch allows a board configuration file to provide default bus
and chip-selects for SPI flash so that first argument to the 'sf' command
is optional.

On boards that use the mxc_spi driver and a GPIO for chip select, this allows
a much simpler command line:
	U-Boot> sf probe
instead of
	U-Boot> sf probe 0x5300

Tested-by: Jason Liu <jason.hui@linaro.org>
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-02-12 15:18:29 -05:00
Hadli, Manjunath
8f5d468721 davinci: add support for printing clock frequency
add support for printing various clock frequency info found
in SOC such as ARM core frequency, DSP core frequency and DDR
frequency as part of bdinfo command.

Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Cc: Tom Rini <trini@ti.com>
2012-02-12 10:11:32 +01:00
Heiko Schocher
fc4fa6a16d common, menu: do not trigger timeout again, if a line is read
Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Jason Hobbs <jason.hobbs@calxeda.com>
Acked-by: Jason Hobbs <jason.hobbs@calxeda.com>
2012-02-12 10:11:24 +01:00
Heiko Schocher
317d6c57d5 common, menu: show menu on startup if CONFIG_MENU_SHOW is defined
show a menu on startup instead running the shell.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Jason Hobbs <jason.hobbs@calxeda.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Acked-by: Jason Hobbs <jason.hobbs@calxeda.com>
2012-02-12 10:11:24 +01:00
Heiko Schocher
e0611dd97b common, menu: add statusline support
add the possibility to show a statusline when printing a menu

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Jason Hobbs <jason.hobbs@calxeda.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2012-02-12 10:11:24 +01:00
Heiko Schocher
9c3483113d common: add possibility for readline_into_buffer timeout
add possibility to add a timeout when reading a line
into a buffer.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Mike Frysinger <vapier@gentoo.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2012-02-12 10:11:23 +01:00
Stefan Kristiansson
2be9fdbfcc openrisc: Add board info printout to cmd_bdinfo
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
2012-01-13 21:16:52 +01:00
Stefan Kristiansson
3ddcaccda3 openrisc: Add architecture image support
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
2012-01-13 21:16:40 +01:00
Kyle Moffett
5dd95cf93d usb_storage: Fix EHCI "out of buffer pointers" with CD-ROM
When performing large bulk reads from a CD or DVD using the U-Boot
usb_storage driver, it generates requests of up to 20 blocks at a time.

With a standard 512-byte block size, that is 10240 bytes and within the
limit of U-Boot's EHCI driver (maximum 5 pages at 4k per page).

Unfortunately CD-ROM media has a 2048-byte blocksize, resulting in a
maximum transfer size of 40960 bytes, which does not fit.

Since the EHCI specification is impossibly obtuse and far beyond my
comprehension, I chose to dynamically compute the limit based on the
blocksize.

Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
2012-01-05 20:10:38 +01:00
Igor Grinberg
bf95df44ff env: factor out the env_get_char_spec() function
env_get_char_spec() function is duplicated across multiple environment
files.
Remove the duplication by providing a default implementation.
Add "weak" declaration, so the default implementation can be overridden.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2012-01-05 16:34:10 +01:00
Stefano Babic
06297db066 FPGA: use debug() instead of module debug printf
Replace also __FUNCTION__ with standard __func__

Signed-off-by: Stefano Babic <sbabic@denx.de>
2012-01-05 16:19:20 +01:00
Wolfgang Denk
bfcc40bb09 Merge branch 'next' of ../next
* 'next' of ../next:
  mkenvimage: Add version info switch (-V)
  mkenvimage: Fix getopt() error handling
  mkenvimage: Fix some typos
  phy: add Micrel KS8721BL phy definition
  net: introduce per device index
  mvgbe: remove setting of ethaddr within the driver
  x86: Add support for specifying an initrd with the zboot command
  x86: Refactor the zboot innards so they can be reused with a vboot image
  x86: Add infrastructure to extract an e820 table from the coreboot tables
  x86: Add support for booting Linux using the 32 bit boot protocol
  x86: Clean up the x86 zimage code in preparation to extend it
  x86: Import code from coreboot's libpayload to parse the coreboot table
  x86: Initial commit for running as a coreboot payload
  CHECKPATCH: ./board/esd/hh405/logo_320_240_8bpp.c
  CHECKPATCH: ./board/esd/hh405/logo_1024_768_8bpp.c
  CHECKPATCH: ./board/esd/hh405/logo_320_240_4bpp.c
  CHECKPATCH: ./board/esd/hh405/logo_640_480_24bpp.c
  CHECKPATCH: ./board/esd/apc405/logo_640_480_24bpp.c
  CHECKPATCH: ./board/esd/voh405/logo_320_240_4bpp.c
  CHECKPATCH: ./board/esd/voh405/logo_640_480_24bpp.c
  CHECKPATCH: ./board/esd/hh405/fpgadata.c
  CHECKPATCH: ./board/esd/pci405/fpgadata.c
  CHECKPATCH: ./board/esd/tasreg/fpgadata.c
  CHECKPATCH: ./board/esd/apc405/fpgadata.c
  CHECKPATCH: ./board/esd/voh405/fpgadata.c
  CHECKPATCH: ./board/esd/ash405/fpgadata.c
  CHECKPATCH: ./board/esd/dasa_sim/fpgadata.c
  CHECKPATCH: ./board/esd/ar405/fpgadata_xl30.c
  CHECKPATCH: ./board/esd/ar405/fpgadata.c
  CHECKPATCH: ./board/esd/plu405/fpgadata.c
  CHECKPATCH: ./board/esd/wuh405/fpgadata.c
  CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci405.c
  CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci405ab.c
  CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci4052.c
  CHECKPATCH: ./board/esd/canbt/fpgadata.c
  CHECKPATCH: ./board/esd/du405/fpgadata.c
  CHECKPATCH: ./board/esd/cpciiser4/fpgadata.c
  CHECKPATCH: ./board/dave/PPChameleonEVB/fpgadata.c
  avr32:mmu.c: fix printf() length modifier
  fat.c: fix printf() length modifier
  cmd_sf.c: fix printf() length modifier
  Make printf and vprintf safe from buffer overruns
  vsprintf: Move function documentation into header file
  Add safe vsnprintf and snprintf library functions
  Move vsprintf functions into their own header

Conflicts:
	tools/mkenvimage.c

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-12-23 20:53:58 +01:00
Wolfgang Denk
e27334212c Merge branch 'master' of /home/wd/git/u-boot/custodians
* 'master' of /home/wd/git/u-boot/custodians:
  common/cmd_pxe.c: Fix GCC 4.6 build warnings
  AVR32: fix timer_init() function
2011-12-20 23:14:37 +01:00
Simon Glass
38bd80b485 net: Fix arguments in tftpput command
The switch to strict_strtoul() was not done correctly - this fixes
the compile error when CONFIG_CMD_TFTPPUT is active.

There appears to very little use of strict_strtoul() in commands, so
it might be easier to switch to simple_strtoul(). If not, we should
decide the best way to use strict_strtoul(). For now I have added a
friendly message which will of course increase code size.

Signed-off-by: Simon Glass <sjg@chromium.org>
2011-12-20 23:12:32 +01:00
Heiko Schocher
43d4a5e687 common/cmd_pxe.c: Fix GCC 4.6 build warnings
Fix:
cmd_pxe.c: In function 'parse_pxefile_top':
cmd_pxe.c:941:5: warning: 'err' may be used uninitialized in this
  function [-Wuninitialized]
cmd_pxe.c:921:6: note: 'err' was declared here

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Jason Hobbs <jason.hobbs@calxeda.com>
Acked-by: Jason Hobbs <jason.hobbs@calxeda.com>
2011-12-20 22:28:51 +01:00
Horst Kronstorfer
d3f80c77ca common/cmd_nvedit.c: Fix size calculation in do_env_import()
do_env_import() missed the final '\0' terminator when calculating the
size of an environment data block.  This led to an erroneous 'bad CRC,
import failed' message for a checksum protected environment (-c.)

Signed-off-by: Horst Kronstorfer <hkronsto@frequentis.com>
2011-12-19 10:19:34 +01:00
Andreas Bießmann
a97f6efdb1 cmd_sf.c: fix printf() length modifier
size_t is not always 'unsigned int', use corret length modifer.

This patch fixes following warning:

---8<---
cmd_sf.c: In function 'spi_flash_update_block':
cmd_sf.c:130: warning: format '%#x' expects type 'unsigend int', but argument 4 has type 'size_t'
cmd_sf.c:135: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'size_t'
--->8---

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
cc: Mike Frysinger <vapier@gentoo.org>
cc: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-12-17 23:55:36 +01:00
Sonny Rao
068af6f843 Make printf and vprintf safe from buffer overruns
From: Sonny Rao <sonnyrao@chromium.org>

utilize the added vscnprintf functions to avoid buffer overruns
The implementation is fairly dumb in that it doesn't detect
that the buffer is too small, but at least will not cause crashes.

Signed-off-by: Sonny Rao <sonnyrao@chromium.org>
2011-12-17 23:34:43 +01:00
Tom Rini
b2fb47f187 USB: Use (get|put)_unaligned for accessing wMaxPacketSize
In 9792987721 Stefan describes a usecase
where the previous behavior of leaving wMaxPacketSize be unaligned
caused fatal problems.  The initial fix for this problem was incomplete
however as it showed another cases of non-aligned access that previously
worked implicitly.  This switches to making sure that all access of
wMaxPacketSize are done via (get|put)_unaligned.

In order to maintain a level of readability to the code in some cases
we now use a variable for the value of wMaxPacketSize and in others, a
macro.

Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Remy Bohmer <linux@bohmer.net>

OpenRISC:
Tested-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>

Beagleboard xM, Pandaboard run-tested, s5p_goni build-tested.
Signed-off-by: Tom Rini <trini@ti.com>
2011-12-16 21:37:17 +01:00
Horst Kronstorfer
d798a9b5d5 common/cmd_nvedit.c: Add missing 'env save' preproc guard
Signed-off-by: Horst Kronstorfer <hkronsto@frequentis.com>
2011-12-12 08:25:38 +01:00
Kumar Gala
3b2001105f powerpc/bootm: Flush ramdisk and device tree image when booting on MP
We already flush the kernel image after we've loaded it to ensure
visiblity to the other cores.  We need to do the same thing for the
ramdisk and device tree images.  In AMP boot scenarios we might not be
HW cache coherent with the secondary core that we are loading and
setting the ramdisk and device tree up for.  Thus we need to ensure
we've flushed the regions of memory utilized by ramdisk and device tree
so the loadding and any modifications (from decompression or fdt updates)
are made visible to the secondary cores.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-12-12 08:17:52 +01:00
Wolfgang Denk
b2eb7d9bc6 Merge branch 'master' of git://git.denx.de/u-boot-usb
* 'master' of git://git.denx.de/u-boot-usb:
  USB: efikamx: Enable USB on EfikaMX and EfikaSB
  USB: Add generic ULPI layer and a viewport
  USB: EHCI: Allow EHCI post-powerup configuration in board files
  USB: mx51evk: add end enable USB host support on port 1
  USB: mx53loco: add end enable USB host support on port 1
  USB: MX5: Add MX5 usb post-init callback
  USB: MX5: Abstract out mx51 USB pixmux configuration
  USB: MX5: add generic USB EHCI support for mx51 and mx53
  USB: MX5: add helper functions to enable USB clocks
  usb:gadget:s5p Enable the USB Gadget framework at GONI
  usb:gadget:s5p USB Device Controller (UDC) implementation
  ehci: speed up initialization
  usb: add help for missing start subcommand
  cosmetic: remove excess whitespace from usb command help
  usb: align usb_endpoint_descriptor to 16-bit boundary
  usbtty: init endpoints prior to startup events
  pxa: convert pxa27x_udc to use read and write functions
  pxa: activate the first usb host port on pxa27x by default
  pxa: fix usb host register mismatch
  ehci-fsl: correct size of ehci caplength
  USB: Add usb_event_poll() to get keyboards working with EHCI
  USB: gadaget: add Marvell controller support
  USB: Fix complaints about strict aliasing in OHCI-HCD
  USB: Drop dead code from usb_kbd.c
  USB: Rework usb_kbd.c
  USB: Add functionality to poll the USB keyboard via control EP
2011-12-12 07:58:58 +01:00
Veli-Pekka Peltola
1af9f96337 usb: add help for missing start subcommand
Signed-off-by: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
Cc: Remy Bohmer <linux@bohmer.net>
2011-12-11 14:42:52 +01:00
Veli-Pekka Peltola
b3813a221b cosmetic: remove excess whitespace from usb command help
Signed-off-by: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
Cc: Remy Bohmer <linux@bohmer.net>
2011-12-11 14:42:35 +01:00
Marek Vasut
5a1219efe9 USB: Drop dead code from usb_kbd.c
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Cc: Remy Bohmer <linux@bohmer.net>
Cc: Wolfgang Denk <wd@denx.de>
2011-12-11 14:40:38 +01:00
Marek Vasut
9a8c72a6c4 USB: Rework usb_kbd.c
* Support dynamic allocation of devices
* Passing data via usb device privptr
* Reorder functions to avoid forward declarations
* Introduce generic polling mechanism to fix musb and ehci-hcd breakage
  due to using "extern new;" to access keyboard driver data!

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Cc: Remy Bohmer <linux@bohmer.net>
Cc: Wolfgang Denk <wd@denx.de>
2011-12-11 14:40:38 +01:00
Marek Vasut
48c8073ec9 USB: Add functionality to poll the USB keyboard via control EP
This allows the keyboard to avoid requests via Interrupt Endpoint altogether and
run all requests via Control Endpoint. This uses the Get_Report request.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Remy Bohmer <linux@bohmer.net>

Rebased on current code.

Signed-off-by: Remy Bohmer <linux@bohmer.net>
2011-12-11 14:40:38 +01:00
Matthias Weisser
21899b1085 sandbox: Add improved RAM simulation
Using mmap to allocate memory from the OS for RAM simulation we can use
u-boot own malloc implementation.

Tested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Matthias Weisser <weisserm@arcor.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-12-10 17:54:04 -05:00
Simon Glass
295d3942b8 Add board_pre_console_putc to deal with early console output
This patch adds support for console output before the console is inited.
The main purpose of this is to deal with a very early panic() which would
otherwise cause a silent hang.

A new board_pre_console_putc() function is added to the board API. If
provided by the board it will be called in the event of console output
before the console is ready. This function should turn on all UARTs and
spray the character out if it possibly can.

The feature is controlled by a new CONFIG_PRE_CONSOLE_PUTC option.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Graeme Russ <graeme.russ@gmail.com>
2011-12-09 14:44:22 +01:00
Wolfgang Denk
c4eba6ec5c common/usb_kbd.c: fix bug introduced in commit 00b7d6e
During the rebase of commit 00b7d6e "USB: Squash checkpatch warnings
in usb_kbd.c" I missed a brace, resulting in a number of build errors.
Fix these.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-12-09 12:09:35 +01:00
Marek Vasut
00b7d6ecc9 USB: Squash checkpatch warnings in usb_kbd.c
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Remy Bohmer <linux@bohmer.net>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>

Rebased to current code.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-12-09 10:28:26 +01:00
Wolfgang Denk
c786f54b9a Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm:
  davinci: Remove unwanted memsize.c from hawkboard's nand spl build
  devkit8000: Move CONFIG_SYS_TEXT_BASE out of bss
  da850evm: pass board revision info to kernel
  arch/arm/include/asm/arch-omap5/clocks.h: Fix GCC 4.2 warnings
  arch/arm/cpu/armv7/omap-common/clocks-common.c: Fix GCC 4.6 warnings
  arch/arm/cpu/armv7/omap-common/spl.c: Fix GCC 4.2 warnings
  MX35: flea3: changes due to hardware revision B
  MX: serial_mxc: cleanup removing nasty #ifdef
  M28: Fix OB1 bug in GPIO driver
  MXS: Add static annotations to dma driver
  apbh_dma: return error value on timeout
  Efika: Configure additional regulators for HDMI output
  mx5: Correct a warning in clock.c
  MC13892: Add REGMODE0 bits definitions
  mx51evk: Configure the pins as GPIOs prior to using gpio_get_value
  mx53smd: Configure the pins as GPIOs prior to using gpio_get_value
  mx53evk: Configure the pins as GPIOs prior to using gpio_get_value
  mx53ard: Configure the pins as GPIOs prior to using gpio_get_value
  mx53loco: Configure the pins as GPIOs prior to using gpio_get_value
  OMAP3: Add SPL_BOARD_INIT hook
  AM3517 CraneBoard: Add SPL support
  AM3517: Add SPL support
  OMAP3: Add SPL support to omap3_evm
  OMAP3: Add SPL support to Beagleboard
  OMAP3 SPL: Add identify_nand_chip function
  OMAP3 SPL: Rework memory initalization and devkit8000 support
  OMAP3: Suffix all Micron memory timing parts with their speed
  OMAP3: Add optimal SDRC autorefresh control values
  omap3: mem: Add MCFG helper macro
  OMAP3: Remove get_mem_type prototype
  OMAP3: Change mem_ok to clear again after reading back
  OMAP3: Add a helper function to set timings in SDRC
  OMAP3: Update SDRC dram_init to always call make_cs1_contiguous()
  omap3: mem: Comment enable_gpmc_cs_config more
  ARM: davici_emac: Fix condition for number of phy detects
  arm: printf() is not available in some SPL configurations
  arm, davinci: add support for am1808 based enbw_cmc board
  arm, davinci: move misc function in arch tree
  arm, board/davinci/common/misc.c: Codingstyle cleanup
  arm, davinci, da850: add uart1 tx rx pinmux config
  arm, davinci: move davinci_rtc struct to hardware.h
  arm, davinci: Remove duplication of pinmux configuration code
  arm, hawkboard: Use the pinmux configurations defined in the arch tree
  arm, da850evm: Use the pinmux configurations defined in the arch tree
  arm, da850: Add pinmux configurations to the arch tree
  arm, da850evm: Do pinmux configuration for EMAC together with other pinmuxes
  arm, hawkboard: Remove obsolete struct pinmux_config i2c_pins
  arm, davinci: Move pinmux functions from board to arch tree
  arm, arm926ejs: always do cpu critical inits
  omap_gpmc: use SOFTECC in SPL if it's enabled
  nand_spl_simple: add support for software ECC
  AM3517: move AM3517 specific mux defines to generic header
  AM35xx: add EMAC support
  davinci_emac: hardcode 100Mbps for AM35xx and RMII
  davinci_emac: fix for running with dcache enabled
  arm926ejs: add noop implementation for dcache ops
  davinci_emac: conditionally compile specific PHY support
  davinci_emac: use internal addresses in buffer descriptors
  davinci_emac: move arch-independent defines to separate header
  BeagleBoard: config: Really switch to ttyO2
  ARM: davinci_dm6467Tevm: Fix build breakage
  ARM: OMAP: Remove STACKSIZE for IRQ and FIQ if unused
  ARM: OMAP3: Remove unused define SDRC_R_C_B
  ARM: OMAP3: Remove unused define CONFIG_OMAP3430
  omap4: fix IO setting
  omap4+: streamline CONFIG_SYS_TEXT_BASE and other SDRAM addresses
  omap4460: add ES1.1 identification
  omap4: emif: fix error in driver
  omap: remove I2C from SPL
  omap4460: fix TPS initialization
  omap: fix cache line size for omap3/omap4 boards
  omap4: ttyO2 instead of ttyS2 in default bootargs
  omap: Improve PLL parameter calculation tool
  start.S: remove omap3 specific code from start.S
  armv7: setup vector
  armv7: include armv7/cpu.c in SPL build
  armv7: disable L2 cache in cleanup_before_linux()
  arm, arm926ejs: Fix clear bss loop for zero length bss
  PXA: Move colibri_pxa270 to board/toradex/
  PXA: Flip colibri_pxa27x to pxa-common.h
  PXA: Introduce common configuration header for PXA
  PXA: Rename pxa_dram_init to pxa2xx_dram_init
  PXA: Squash extern pxa_dram_init()
  PXA: Export cpu_is_ and pxa_dram_init functions
  PXA: Cleanup Colibri PXA270
  PXA: Replace timer driver
  PXA: Add cpuinfo display for PXA2xx
  PXA: Separate PXA2xx CPU init
  PXA: Rename CONFIG_PXA2[57]X to CONFIG_CPU_PXA2[57]X
  PXA: Unify vpac270 environment size
  PXA: Enable command line editing for vpac270
  PXA: Adapt Voipac PXA270 to OneNAND SPL
  PXA: Drop Voipac PXA270 OneNAND IPL
  PXA: Fixup PXA25x boards after start.S update
  PXA: Re-add the Dcache locking as RAM for pxa250
  PXA: Rework start.S to be closer to other ARMs
  PXA: Drop XM250 board
  PXA: Drop PLEB2 board
  PXA: Drop CRADLE board
  PXA: Drop CERF250 board
  Fix regression in SMDK6400
  nand: Add common functions to linux/mtd/nand.h
  Ethernut 5 board support
  net: Armada100: Fix compilation warnings
  ARM: remove duplicated code for LaCie boards
  ARM: add support for LaCie 2Big Network v2
  mvsata: fix ide_preinit for missing disks
  netspace_v2: Read Ethernet MAC address from EEPROM
  omap3evm: Add support for EFI partitions
  part_efi: Fix compile errors
2011-12-07 09:09:58 +01:00
Simon Glass
5f3dfadc26 Fix unused function in cmd_bdinfo.c
It is fine to use __maybe_unused instead of #ifdef, but we also need one
for print_eth() since not all boards have Ethernet. This fixes this
warning:

cmd_bdinfo.c:39:13: warning: 'print_eth' defined but not used [-Wunused-function]

Signed-off-by: Simon Glass <sjg@chromium.org>
2011-12-07 08:42:28 +01:00
Simon Glass
80729a5493 Fix SPI build errors in exports.c
The spi.h include is no longer included in exports.h, so must be included
here.

This fixes these errors:

In file included from exports.c:41:0:
/home/sjg/trunk/src/third_party/u-boot/files/include/_exports.h: In function 'jumptable_init':
/home/sjg/trunk/src/third_party/u-boot/files/include/_exports.h:27:1: error: 'spi_init' undeclared (first use in this function)
/home/sjg/trunk/src/third_party/u-boot/files/include/_exports.h:27:1: note: each undeclared identifier is reported only once for each function it appears in
/home/sjg/trunk/src/third_party/u-boot/files/include/_exports.h:28:1: error: 'spi_setup_slave' undeclared (first use in this function)
/home/sjg/trunk/src/third_party/u-boot/files/include/_exports.h:29:1: error: 'spi_free_slave' undeclared (first use in this function)
/home/sjg/trunk/src/third_party/u-boot/files/include/_exports.h:30:1: error: 'spi_claim_bus' undeclared (first use in this function)
/home/sjg/trunk/src/third_party/u-boot/files/include/_exports.h:31:1: error: 'spi_release_bus' undeclared (first use in this function)
/home/sjg/trunk/src/third_party/u-boot/files/include/_exports.h:32:1: error: 'spi_xfer' undeclared (first use in this function)

Signed-off-by: Simon Glass <sjg@chromium.org>
2011-12-07 08:41:22 +01:00
Wolfgang Denk
f915c9316c Revert "mii: miiphy register address width change"
This reverts commit 5c45a22b92.

It causes a lot of "incompatible pointer type" warnings for a large
number of Ethernet drivers, which are not really worth fixing
especially as this patch was only supposed to help the old,
deprecated miiphy API.  Instead of adding more efforts to a lost case
we rather revert it.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-12-07 08:35:14 +01:00
Marek Vasut
abc20aba18 PXA: Rename CONFIG_PXA2[57]X to CONFIG_CPU_PXA2[57]X
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2011-12-06 23:59:32 +01:00
Vadim Bendebury
576fb1ed3f Add a cli command to test the TPM device.
The command gets an arbitrary number of arguments (up to 30), which
are interpreted as byte values and are feed into the TPM device after
proper initialization. Then the return value and data of the TPM
driver is examined.

TPM commands are described in the TCG specification.

For instance, the following sequence is the 'TPM Startup' command, it
is processed by the TPM and a response is generated:

boot > tpm 0x0 0xc1 0x0 0x0 0x0 0xc 0x0 0x0 0x0 0x99 0x0 0x1
Found TPM SLB9635 TT 1.2 by Infineon
Got TPM response:
 00 c4 00 00 00 0a 00 00 00 00

If the command is corrupted (fed one byte short), an error is reported:
boot > tpm 0x0 0xc1 0x0 0x0 0x0 0xc 0x0 0x0 0x0 0x99 0x0
generic_lpc_tpm.c:311 unexpected TPM status 0xff000888
generic_lpc_tpm.c:516 failed sending data to TPM
tpm command failed
boot >

Change-Id: I3f3c5bfec8b852e208c4e99ba37b0f2b875140b0
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
CC: Wolfgang Denk <wd@denx.de>
2011-12-06 21:30:03 +01:00
Jason Hobbs
6f40f2749a pxe: make the first label the implicit default
If no default label is specified, but a situation arises where the
default label should be used, treat the first label specified as the
default label.

Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com>
Cc: Ricardo Salveti de Araujo <ricardo.salveti@linaro.org>
Cc: Wolfgang Denk <wd@denx.de>
2011-12-06 21:21:42 +01:00
Mike Frysinger
d88af4da9a cmd_bdinfo: simplify local static funcs a bit
If we move the local funcs to the top of the file, and use the
__maybe_unused define, we can drop a lot of ugly ifdef logic and
duplicated prototypes.

Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-12-06 21:12:43 +01:00
Chandan Nath
5c45a22b92 mii: miiphy register address width change
This patch is added for PHY whose register offset value exceeds 0xFF and
cannot be used with "unsigned char" datatype in miiphy_read, miiphy_write
and miiphy_register functions. Datatype of register offset is changed to
unsigned short instead of unsigned char so that offset value greater then
0xFF can be used.

Signed-off-by: Chandan Nath <chandan.nath@ti.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-12-06 21:01:01 +01:00
Thomas Weber
a621614d0c env_nand: Remove DEBUG definition
Signed-off-by: Thomas Weber <weber@corscience.de>
2011-12-06 12:03:08 +01:00
Anatolij Gustschin
2157497615 common/menu.c: Fix build warning
Fix:
menu.c: In function 'menu_item_print':
menu.c:91: warning: passing argument 1 of 'putc' makes integer from
pointer without a cast

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
2011-12-05 23:26:40 +01:00
Gerlando Falauto
7813ca9b66 serial: constify serial_assign()
Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-12-05 22:48:10 +01:00
Gerlando Falauto
a6e6f7f4d0 serial: cosmetic checkpatch compliance
Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-12-05 22:47:45 +01:00
Andy Fleming
1cdabc4bc7 miiphy: Note that miiphy_* API is deprecated
We want to move everything to phylib, and we definitely don't want
new drivers using the miiphy infrastructure.

Signed-off-by: Andy Fleming <afleming@freescale.com>
2011-12-05 22:17:06 +01:00
Wolfgang Denk
4ebbba4425 Merge branch 'sr@denx.de' of git://git.denx.de/u-boot-staging
* 'sr@denx.de' of git://git.denx.de/u-boot-staging:
  image: Don't detect XIP images as overlapping.
  image: Implement IH_TYPE_KERNEL_NOLOAD
2011-12-02 00:05:25 +01:00
Stephen Warren
d510859bed image: Don't detect XIP images as overlapping.
bootm_load_os() detects when it writes the decompressed image over
the top of the compressed image. If this happens, the original image
is corrupted. When the original image is a multi-component legacy image,
or a (potentially multi-component) FIT image, this implies that other
components may be corrupted. In turn, this means that booting is unlikely
to be successful.

However, in the case of no image compresssion coupled with an image with
load address equal to where the image is already located (e.g. an XIP
kernel, or IH_TYPE_KERNEL_ANYLOAD), there has been no copy and hence no
corruption, no matter whether it's a single-component legacy image, a
multi-component legacy image, or a FIT image. In this case, disable the
overlap detection, and allow boot to continue.

Without this change, when booting a single-component legacy image that
contains an IH_TYPE_KERNEL_ANYLOAD, bootm_load_os() would have returned
BOOTM_ERR_OVERLAP, but the caller ignores this, and boot continues and
succeeds. Now, the false error is no longer even returned.

Without this change, when booting a FIT image that contains an
IH_TYPE_KERNEL_ANYLOAD, bootm_load_os() would have returned
BOOTM_ERR_OVERLAP, which would then cause the caller to reset the board.
Now, the false error is no longer returned, and boot succeeds.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2011-12-01 09:49:31 +01:00
Stephen Warren
b9b50e89d3 image: Implement IH_TYPE_KERNEL_NOLOAD
The legacy uImage format includes an absolute load and entry-point
address. When bootm operates on a kernel uImage in memory that isn't
loaded at the address in the image's load address, U-Boot will copy
the image to its address in the header.

Some kernel images can actually be loaded and used at any arbitrary
address. An example is an ARM Linux kernel zImage file. To represent
this capability, IH_TYPE_KERNEL_NOLOAD is implemented, which operates
just like IH_TYPE_KERNEL, except that the load address header is
ignored, and U-Boot does not copy the image to its load address, but
rather uses it in-place.

This is useful when sharing a single (uImage-wrapped) zImage across
multiple boards with different memory layouts; in this case, a specific
load address need not be picked when creating the uImage, but instead
is selected by the board-specific U-Boot environment used to load and
boot that image.

v2: Rename from IH_TYPE_KERNEL_ANYLOAD to IH_TYPE_KERNEL_NOLOAD.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2011-12-01 09:45:35 +01:00
Graeme Russ
a76fc70ee1 x86: Provide more configuration granularity
Planned future ports requires more granularity for some options

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-11-29 21:09:52 +11:00
Wolfgang Denk
a63d965275 menu.c: use puts() instead of printf() where possible
common/menu.c used printf() in a number of places to print user
provided, constant strings (like the "title" string).  printf() is
dangerous here for example in case the user unwittingly embeds some
'%' caracters that printf() would interpret as formatting and then
pick up random arguments.  Use puts() instead.

We also omit the trailing ':' in the title line - if a user wants
this, he can provide it as part of the title string.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-28 20:19:41 +01:00
Kumar Gala
068f158fdf cmd_nvedit.c: Fix compiler warning introduced by checkpatch cleanup
cmd_nvedit.c: In function 'do_env_grep':
cmd_nvedit.c:182:3: warning: suggest parentheses around assignment used as truth value

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2011-11-27 15:46:10 +01:00
Wolfgang Denk
fdbe8b9a2d Merge branch 'hs@denx.de' of git://git.denx.de/u-boot-staging
* 'hs@denx.de' of git://git.denx.de/u-boot-staging:
  drivers/net/dnet.c: Fix GCC 4.6 warnings
  board/xaeniax/flash.c: Fix GCC 4.6 warnings
  net/bootp.c: Fix GCC 4.6 warning
  common/cmd_bootm.c: Fix GCC 4.6 warnings
  board/mx1ads/mx1ads.c: Fix GCC 4.6 warning
  board/mx1ads/syncflash.c: Fix GCC 4.6 warnings
  board/lubbock/flash.c: Fix GCC 4.6 warnings
  drivers/net/cs8900.c: Fix GCC 4.6 warning
  arch/arm/cpu/arm926ejs/omap/cpuinfo.c: Fix GCC 4.6 warnings
  drivers/net/lan91c96.c: Fix GCC 4.6 warning
  board/ronetix/pm9263/pm9263.c: Fix GCC 4.6 warning
  drivers/mtd/onenand/samsung.c: Fix GCC 4.6 warning
  drivers/usb/musb/musb_hcd.c: Fix GCC 4.6 warning
2011-11-23 21:23:45 +01:00
Anatolij Gustschin
5bf2766b4b common/cmd_bootm.c: Fix GCC 4.6 warnings
Fix:
cmd_bootm.c: In function 'bootm_load_os':
cmd_bootm.c:315:7: warning: unused variable 'unc_len'
[-Wunused-variable]

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-23 08:14:27 +01:00
Igor Grinberg
27aafe988e env: clean env_common.c checkpatch and code style
Cleanup the env_common.c checkpatch warnings, errors and coding style.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2011-11-22 08:39:27 +01:00
Igor Grinberg
de152b9bf8 env: clean env_nand.c checkpatch and code style
Cleanup the env_nand.c checkpatch warnings, errors and coding style.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2011-11-22 08:39:26 +01:00
Igor Grinberg
82b54b972b env: clean env_flash.c checkpatch and code style
Cleanup the env_flash.c checkpatch warnings, errors and coding style.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2011-11-22 08:39:26 +01:00
Igor Grinberg
eb58a7fc77 env: clean env_sf.c checkpatch and code style
Cleanup the env_sf.c checkpatch warnings, errors and coding style.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2011-11-22 08:39:26 +01:00
Igor Grinberg
dd2a233c94 env: clean env_eeprom.c checkpatch and code style
Cleanup the env_eeprom.c checkpatch warnings, errors and coding style.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2011-11-22 08:39:26 +01:00
Igor Grinberg
bd2a23ac61 env: clean env_embedded.c checkpatch and code style
Cleanup the env_embedded.c checkpatch warnings, errors and coding style.
There is one error left though:
 ERROR: Macros with multiple statements should be enclosed in a do - while loop
 #79: FILE: u-boot/common/env_embedded.c:79:
 +#define GEN_ABS(name, value)                   \
 +       asm(".globl " GEN_SYMNAME(name));       \
 +       GEN_SET_VALUE(name, value)

 total: 1 errors, 0 warnings, 213 lines checked

We cannot enclose that statement in a do - while loop,
because these are a global assembly declarations.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2011-11-22 08:39:26 +01:00
Igor Grinberg
e8db8f71c9 env: clean env_mmc.c checkpatch and code style
Cleanup the env_mmc.c checkpatch warnings, errors and coding style.
Simplify env_relocate_spec() function implementation.
Also mark internal functions as static.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2011-11-22 08:39:26 +01:00
Igor Grinberg
91494ca6a0 env: clean env_nvram.c checkpatch and code style
Cleanup the env_nvram.c checkpatch warnings, errors and coding style.
There are 2 wanring left about the extern used in c file:
 WARNING: externs should be avoided in .c files
 #53: FILE: env_nvram.c:53:
 +extern void *nvram_read(void *dest, const long src, size_t count);

 WARNING: externs should be avoided in .c files
 #54: FILE: env_nvram.c:54:
 +extern void nvram_write(long dest, const void *src, size_t count);

 total: 0 errors, 2 warnings, 138 lines checked

There is no common nvram header file to use instead of the externs.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2011-11-22 08:39:26 +01:00
Igor Grinberg
b919ec25e7 env: clean env_onenand.c checkpatch and code style
Cleanup the env_onenand.c checkpatch warnings, errors and coding style.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2011-11-22 08:39:26 +01:00
Igor Grinberg
0901d9f891 env: clean env_dataflash.c checkpatch and code style
Cleanup the env_dataflash.c checkpatch warnings, errors
and coding style.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2011-11-22 08:39:26 +01:00
Igor Grinberg
6b15566681 env: clean env_mgdisk.c checkpatch and code style
Cleanup the env_mgdisk.c checkpatch warnings, errors
and coding style.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2011-11-22 08:39:25 +01:00
Igor Grinberg
dcfe6e6fa1 env: clean env_nowhere.c checkpatch and code style
Cleanup the env_nowhere.c checkpatch warnings, errors and coding style.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2011-11-22 08:39:25 +01:00
Igor Grinberg
d09b1787a4 env: clean cmd_nvedit.c checkpatch and code style
Cleanup the cmd_nvedit.c checkpatch warnings, errors and coding style.
There are 10 wanrings left about the simple_strtoul() function:
 WARNING: simple_strtoul is obsolete, use kstrtoul instead
 #359: FILE: cmd_nvedit.c:359:
 +		load_addr = simple_strtoul(argv[2], NULL, 16);

 ...

 total: 0 errors, 10 warnings, 1043 lines checked

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2011-11-22 08:39:25 +01:00
Igor Grinberg
994bc671cf env: move extern environment[] to environment.h
Extract all extern declarations for environment out of c files
into the environment.h header.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2011-11-22 08:39:25 +01:00
Igor Grinberg
d1459f0fab env: move extern default_environment[] to environment.h
Extract all extern declarations for default_environment[] out of c files
into the environment.h header.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Cc: Stefan Roese <sr@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
2011-11-22 08:39:25 +01:00
Igor Grinberg
e3150460a4 common: move extern char console_buffer[] to common.h
Extract all extern declarations for console_buffer[] out of c files into
the common.h header.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Cc: Frank Gottschling <fgottschling@eltec.de>
Cc: Murray Jensen <Murray.Jensen@csiro.au>
2011-11-22 08:39:25 +01:00
Simon Glass
79afc88d2c Fix warnings in cmd_nvedit.c
This printf() string should be %ld now that uintptr_t is defined
as long. Also fix a size_t error.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-11-22 08:39:24 +01:00
Kumar Gala
94c50f1176 Revert "sandbox: Change md command to use map_physmem"
This reverts commit 355a835747.

The original commit broke long standing assumption that md commands work
on effective addresses.  This normally isn't an issue for most systems
that map 1:1, however on systems with a 36-bit address map it breaks.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-16 21:43:24 +01:00
Kim Phillips
e1a37f8599 common: tsi148 - fix gcc 4.6 compiler warning
Configuring for vme8349 board...
cmd_tsi148.c: In function 'tsi148_init':
cmd_tsi148.c:56:17: warning: variable 'lastError' set but not used [-Wunused-but-set-variable]

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2011-11-16 21:42:17 +01:00
Wolfgang Denk
e4119560cf common/cmd_universe.c: Fix GCC 4.6 build warning
Fix:
cmd_universe.c: In function 'universe_init':
cmd_universe.c:49:17: warning: variable 'lastError' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-16 21:04:55 +01:00
Wolfgang Denk
4ec6e4a88f common/cmd_fdc.c: Fix GCC 4.6 build warnings
Fix:
cmd_fdc.c: In function 'fdc_read_data':
cmd_fdc.c:435:6: warning: variable 'flags' set but not used
[-Wunused-but-set-variable]
cmd_fdc.c:432:16: warning: variable 'pcn' set but not used
[-Wunused-but-set-variable]
cmd_fdc.c:431:20: warning: variable 'lastblk' set but not used
[-Wunused-but-set-variable]

Note: no attempts were made to otherwise cleanup the code.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-16 21:04:44 +01:00
Wolfgang Denk
bb82de8840 Merge branch 'master' of /home/wd/git/u-boot/custodians
* 'master' of /home/wd/git/u-boot/custodians:
  api: export LCD device to external apps
  font: split font data from video_font.h
  tools: logo: split bmp arrays from bmp_logo.h
  lcd: add clear and draw bitmap declaration
  VIDEO: mx3fb: GCC4.6 fix build warnings
  Powerpc/DIU: Fixed the 800x600 and 1024x768 resolution bug
2011-11-16 20:44:06 +01:00
Wolfgang Denk
9dfa8da709 Merge branch 'master' of git://git.denx.de/u-boot-video
* 'master' of git://git.denx.de/u-boot-video:
  api: export LCD device to external apps
  font: split font data from video_font.h
  tools: logo: split bmp arrays from bmp_logo.h
  lcd: add clear and draw bitmap declaration
  VIDEO: mx3fb: GCC4.6 fix build warnings
  Powerpc/DIU: Fixed the 800x600 and 1024x768 resolution bug
2011-11-16 20:44:03 +01:00
Wolfgang Denk
0e62e0a72c Merge branch 'master' of /home/wd/git/u-boot/custodians
* 'master' of /home/wd/git/u-boot/custodians:
  arm, davinci: add DAVINCI_MMC_CLKID
  arm, davinci_emac: fix driver bug if more then 3 PHYs are detected
  arm, davinci: da850/dm365 lowlevel cleanup
  omap5: Add omap5_evm board build support.
  omap4/5: Add support for booting with CH.
  omap5: emif: Add emif/ddr configurations required for omap5 evm
  omap5: clocks: Add clocks support for omap5 platform.
  omap5: Add minimal support for omap5430.
  omap: Checkpatch fixes
  omap4: make omap4 code common for future reuse
  GCC4.6: Squash warnings in onenand_base.c
  GCC4.6: Fix common/usb.c on xscale
  OneNAND: Add simple OneNAND SPL
  PXA: vpac270: Enable the new generic MMC driver
  PXA: Cleanup serial_pxa
  PXA: Drop csb226 and innokom boards (unmaintained)
  m28evk: Fix comment about the number of RAM banks
  mx31: Fix checkpatch warnings in generic.c
  mx31: Use proper IO accessor for GPR register
  mx31: Remove duplicate definition for GPR register
  qong: Use generic function for configuring GPR register
  M28EVK: Enable USB HOST support
  iMX28: Add USB HOST driver
  iMX28: Add USB and USB PHY register definitions
  M28: Add memory detection into SPL
  iMX28: Fix ARM vector handling
  M28: Add doc/README.m28 documentation
  M28: Add MMC SPL
  iMX28: Add support for DENX M28EVK board
  iMX28: Add u-boot.sb target to Makefile
  iMX28: Add image header generator tool
  iMX28: Add driver for internal RTC
  iMX28: Add GPMI NAND driver
  iMX28: Add APBH DMA driver
  iMX28: Add SPI driver
  iMX28: Add GPIO control
  iMX28: Add I2C bus driver
  iMX28: Add PINMUX control
  FEC: Add support for iMX28 quirks
  iMX28: Add SSP MMC driver
  iMX28: Initial support for iMX28 CPU
  MX25: zmx25: GCC4.6 fix build warnings
  da850: add new config file for AM18xx
  BeagleBoard: config: Switch to ttyO2
  OMAP3: Change omap3_evm maintainer
  devkit8000: Fix NAND SPL on boards with 256MB NAND
  integrator: enable Vpp and disable flash protection
  integrator: add system controller header
  integrator: make flash writeable on boot
  integrator: use io-accessors for board init
  integrator: move text offset to config
  integrator: pass configs for core modules
  ARM: remove superfluous setting of arch_number in board specific code.
  SPL: Allow ARM926EJS to avoid compiling in the CPU support code
  integrator: do not test first part of the memory
  arm: a320: fix broken timer
  ARM: define CONFIG_MACH_TYPE for all ronetix boards
  dm646x: pass board revision info to kernel
  dm646x: add new configuration for dm6467T
  arm, davinci: Fix setting of the SDRAM configuration register
  arm, davinci: Remove the duplication of LPSC functions
  arm, davinci: Rename AM1808 lowlevel functions to DA850
  da8xxevm: fix build error
  ARM: re-add MACH_TYPE_XXXXXX for VCMA9 board and add CONFIG_MACH_TYPE
2011-11-16 20:24:51 +01:00
Wolfgang Denk
0c2dd9a05b Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm:
  arm, davinci: add DAVINCI_MMC_CLKID
  arm, davinci_emac: fix driver bug if more then 3 PHYs are detected
  arm, davinci: da850/dm365 lowlevel cleanup
  omap5: Add omap5_evm board build support.
  omap4/5: Add support for booting with CH.
  omap5: emif: Add emif/ddr configurations required for omap5 evm
  omap5: clocks: Add clocks support for omap5 platform.
  omap5: Add minimal support for omap5430.
  omap: Checkpatch fixes
  omap4: make omap4 code common for future reuse
  GCC4.6: Squash warnings in onenand_base.c
  GCC4.6: Fix common/usb.c on xscale
  OneNAND: Add simple OneNAND SPL
  PXA: vpac270: Enable the new generic MMC driver
  PXA: Cleanup serial_pxa
  PXA: Drop csb226 and innokom boards (unmaintained)
  m28evk: Fix comment about the number of RAM banks
  mx31: Fix checkpatch warnings in generic.c
  mx31: Use proper IO accessor for GPR register
  mx31: Remove duplicate definition for GPR register
  qong: Use generic function for configuring GPR register
  M28EVK: Enable USB HOST support
  iMX28: Add USB HOST driver
  iMX28: Add USB and USB PHY register definitions
  M28: Add memory detection into SPL
  iMX28: Fix ARM vector handling
  M28: Add doc/README.m28 documentation
  M28: Add MMC SPL
  iMX28: Add support for DENX M28EVK board
  iMX28: Add u-boot.sb target to Makefile
  iMX28: Add image header generator tool
  iMX28: Add driver for internal RTC
  iMX28: Add GPMI NAND driver
  iMX28: Add APBH DMA driver
  iMX28: Add SPI driver
  iMX28: Add GPIO control
  iMX28: Add I2C bus driver
  iMX28: Add PINMUX control
  FEC: Add support for iMX28 quirks
  iMX28: Add SSP MMC driver
  iMX28: Initial support for iMX28 CPU
  MX25: zmx25: GCC4.6 fix build warnings
  da850: add new config file for AM18xx
  BeagleBoard: config: Switch to ttyO2
  OMAP3: Change omap3_evm maintainer
  devkit8000: Fix NAND SPL on boards with 256MB NAND
  integrator: enable Vpp and disable flash protection
  integrator: add system controller header
  integrator: make flash writeable on boot
  integrator: use io-accessors for board init
  integrator: move text offset to config
  integrator: pass configs for core modules
  ARM: remove superfluous setting of arch_number in board specific code.
  SPL: Allow ARM926EJS to avoid compiling in the CPU support code
  integrator: do not test first part of the memory
  arm: a320: fix broken timer
  ARM: define CONFIG_MACH_TYPE for all ronetix boards
  dm646x: pass board revision info to kernel
  dm646x: add new configuration for dm6467T
  arm, davinci: Fix setting of the SDRAM configuration register
  arm, davinci: Remove the duplication of LPSC functions
  arm, davinci: Rename AM1808 lowlevel functions to DA850
  da8xxevm: fix build error
  ARM: re-add MACH_TYPE_XXXXXX for VCMA9 board and add CONFIG_MACH_TYPE
2011-11-16 20:24:41 +01:00
Wolfgang Denk
f31f496e30 Merge branch 'master' of /home/wd/git/u-boot/custodians
* 'master' of /home/wd/git/u-boot/custodians:
  Fix constness of the fdt void pointer in fdt_getprop_u32_default
  Add some missing endian conversions in fdt_support.c
2011-11-16 20:18:05 +01:00
Che-Liang Chiou
d3983ee853 font: split font data from video_font.h
While video_font.h is useful even without referencing the font data, it
is not possible to be included multiple times because it defines font
data array right in the header.

This patch splits the font data array into video_font_data.h and so now
video_font.h can be included multiple times.  This at least solves the
code duplication in board/mcc200/lcd.c.

Signed-off-by: Che-Liang Chiou <clchiou@chromium.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-11-15 23:58:26 +01:00
Che-Liang Chiou
c270730f58 tools: logo: split bmp arrays from bmp_logo.h
The generated header bmp_logo.h is useful even outside common/lcd.c for
the logo dimension.  However, the problem is, the generated bmp_logo.h
cannot be included multiple times because bmp_logo_palette[] and
bmp_logo_bitmap[] are defined in the bmp_logo.h.

This patch fixes this by defining these arrays in another header
bmp_logo_data.h and in bmp_logo.h only declaring these arrays.

Signed-off-by: Che-Liang Chiou <clchiou@chromium.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-15 23:58:26 +01:00
Che-Liang Chiou
02110903a8 lcd: add clear and draw bitmap declaration
The functions for clearing and drawing bitmaps on the screen were not
exposed publicly and are made public in this patch in preparation for
implementing the display interface of api_public.h.

Signed-off-by: Che-Liang Chiou <clchiou@chromium.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-15 23:58:26 +01:00
Marek Vasut
5e8baf878e GCC4.6: Fix common/usb.c on xscale
The problem was that the code, when the function was compiled with -Os, was
misgenerated. As in the function description, this is likely another
manifestation of the bug in GCC.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Remy Bohmer <linux@bohmer.net>
2011-11-15 22:24:50 +01:00
Gabe Black
07e1278496 Fix constness of the fdt void pointer in fdt_getprop_u32_default
The function fdt_getprop_u32_default doesn't modify the fdt, so it can use a
const void * for its fdt argument.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
2011-11-13 11:21:34 -05:00
Gabe Black
de16606ae3 Add some missing endian conversions in fdt_support.c
Some functions in fdt_support.c use fdt_getprop to read 32 bit values out of
the device tree, but then use them directly without doing any endian
conversion. Because they check for a value that doesn't actually appear in
practice, the functions continued to work even though they're incorrect.
This change adds the missing conversions.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
2011-11-13 11:21:34 -05:00
Wolfgang Denk
37f2fe7472 env: allow to export only selected variables
New syntax:
	env export [-t | -b | -c] [-s size] addr [var ...]

With this change it is possible to provide a list of variables names
that shall be exported.  Whenno arguments are given, the whole
environment gets exported.

NOTE: The new handling of the "size" argument means a change to the
user API.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-08 13:20:42 +01:00
Wolfgang Denk
4f5710f740 common/cmd_flash.c: Fix GCC 4.6 build warnings
Fix:
cmd_flash.c:355:32: warning: 'info' may be used uninitialized in this
function [-Wuninitialized]
cmd_flash.c:354:10: warning: 'sect_first' may be used uninitialized in
this function [-Wuninitialized]
cmd_flash.c:354:10: warning: 'sect_last' may be used uninitialized in
this function [-Wuninitialized]
cmd_flash.c: In function 'do_protect':
cmd_flash.c:540:9: warning: 'info' may be used uninitialized in this
function [-Wuninitialized]
cmd_flash.c:538:9: warning: 'sect_first' may be used uninitialized in
this function [-Wuninitialized]
cmd_flash.c:538:9: warning: 'sect_last' may be used uninitialized in
this function [-Wuninitialized]

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07 22:47:40 +01:00
Wolfgang Denk
e8260cb25a common/cmd_i2c.c: Fix GCC 4.6 build warning
Fix:
cmd_i2c.c: In function 'do_i2c_add_bus':
cmd_i2c.c:1212:19: warning: variable 'dev' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Heiko Schocher <hs@denx.de>
2011-11-07 22:15:57 +01:00
Simon Glass
355a835747 sandbox: Change md command to use map_physmem
Sandbox wants to support commands which use memory. The map_physmen()
call provides this feature, so should be used more consistently in
U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Tested-by: Matthias Weisser <weisserm@arcor.de>
2011-11-03 22:35:01 +01:00
Wolfgang Denk
a2b92a655a common/cmd_ide.c: fix GCC 4.6 build warnings
Fix:
cmd_ide.c: In function 'ide_ident':
cmd_ide.c:988:6: warning: variable 'do_retry' set but not used
[-Wunused-but-set-variable]

Delete the unused variable.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-03 20:41:47 +01:00
Wolfgang Denk
34c202c7eb common/cmd_ide.c: CodingStyle cleanup
Make file acceptable to checkpatch.

This is only a basic clean up to the extend possible without any real
changes to the source code. Warnings due to line over 80 characters
were accepted because these affect only printf()s with user visible
strings.  No attempts were made to fix warnings about volatile and
externs - these need a more thorough cleanup.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-03 20:41:32 +01:00
Wolfgang Denk
87a5d60103 Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm:
  ARM: Add Calxeda Highbank platform
  dkb: make mmc command as default enabled
  Marvell: dkb: add mmc support
  ARM: pantheon: add mmc definition
  davinci: remove config.mk file from the sources
  ARM:AM33XX: Add support for TI AM335X EVM
  ARM:AM33XX: Added timer support
  ARM:AM33XX: Add emif/ddr support
  ARM:AM33XX: Add clock definitions
  ARM:AM33XX: Added support for AM33xx
  omap3/emif4: fix registers definition
  davinci: remove obsolete macro CONFIG_EMAC_MDIO_PHY_NUM
  davinci: emac: add support for more than 1 PHYs
  davinci: emac: add new features to autonegotiate for EMAC
  da850evm: Move LPSC configuration to board_early_init_f()
  omap4_panda: Build in cmd_gpio support on panda
  omap: Don't use gpio_free to change direction to input
  mmc: omap: Allow OMAP_HSMMC[23]_BASE to be unset
  OMAP3: overo : Add environment variable optargs to bootargs
  OMAP3: overo: Move ethernet CS4 configuration to execute based on board id
  OMAP3: overo : Use ttyO2 instead of ttyS2.
  da830: add support for NAND boot mode
  dm36x: revert cache disable patch
  dm644X: revert cache disable patch
  devkit8000: Add malloc space
  omap: spl: fix build break due to changes in FAT
  OMAP3 SPL: Provide weak omap_rev_string
  omap: beagle: Use ubifs instead of jffs2 for nand boot
  omap: overo: Disable pull-ups on camera PCLK, HS and VS signals
  omap: overo: Configure mux for gpio10
  SPL: Add DMA library
  omap3: Add interface for omap3 DMA
  omap3: Add DMA register accessors
  omap3: Add Base register for DMA
  arm, davinci: add missing LSPC define for MMC/SD1
  U-Boot/SPL: omap4: Make ddr pre-calculated timings as default.
  DaVinci: correct MDSTAT.STATE mask
  omap4: splitting padconfs into common, 4430 and 4460
  omap4: adding revision detection for 4460 ES1.1
  omap4: replacing OMAP4_CONTROL with OMAP4430_CONTROL
  gplug: fixed build error as a result of code cleanup patch
  kirkwood_spi: add dummy spi_init()
  gpio: mvmfp: reduce include platform file
  ARM: orion5x: reduce dependence of including platform file
  serial: reduce include platform file for marvell chip
  ARM: kirkwood: reduce dependence of including platform file
  ARM: armada100: reduce dependence of including platform file
  ARM: pantheon: reduce dependence of including platform file
  Armada100: Add env storage support for Marvell gplugD
  Armada100: Add SPI flash support for Marvell gplugD
  Armada100: Add SPI support for Marvell gplugD
  SPI: Add SPI driver support for Marvell Armada100
  dreamplug: initial board support.
  imx: fix coding style
  misc: pmic: drop old Freescale's pmic driver
  MX31: mx31pdk: use new pmic driver
  MX31: mx31ads: use new pmic driver
  MX31: mx31_litekit: use new pmic driver
  MX5: mx53evk: use new pmic driver
  MX5: mx51evk: use new pmic driver
  MX35: mx35pdk: use new pmic driver
  misc: pmic: addI2C  support to pmic_fsl driver
  misc: pmic: use I2C_SET_BUS in pmic I2C
  MX5: efikamx/efikasb: use new pmic driver
  MX3: qong: use new pmic driver
  RTC: Switch mc13783 to generic pmic code
  MX5: vision2: use new pmic driver
  misc: pmic: Freescale PMIC switches to generic PMIC driver
  misc:pmic:samsung Enable PMIC driver at GONI target
  misc:pmic:max8998 MAX8998 support at a new PMIC driver.
  misc:pmic:core New generic PMIC driver
  mx31pdk: Remove unneeded config
  mx31: provide readable WEIM CS accessor
  MX51: vision2: Set global macros
  I2C: Add i2c_get/set_speed() to mxc_i2c.c
  ARM: Update mach-types
  devkit8000: Add config to enable SPL MMC boot
  devkit8000: protect board_mmc_init
  arm, post: add missing post_time_ms for arm
  cosmetic, post: Codingstyle cleanup
  arm, logbuffer: make it compileclean
  tegra2: Enable MMC for Seaboard
  tegra2: Add more pinmux functions
  tegra2: Rename PIN_ to PINGRP_
  tegra2: Add more clock functions
  tegra2: Clean up board code a little
  tegra2: Rename CLOCK_PLL_ID to CLOCK_ID
2011-10-28 00:15:19 +02:00
Marek Vasut
35e9d698cd GCC4.6: Squash undefined variable in cmd_mtdparts.c
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27 23:54:04 +02:00
Marek Vasut
4b210e8bcf GCC4.6: Squash subsequent warnings in usb_storage.c
usb_storage.c: In function ‘us_one_transfer’:
usb_storage.c:377:7: warning: format ‘%X’ expects argument of type ‘unsigned
int’, but argument 2 has type ‘long unsigned int’ [-Wformat]
usb_storage.c:389:6: warning: format ‘%d’ expects argument of type ‘int’, but
argument 2 has type ‘long unsigned int’ [-Wformat]
usb_storage.c:394:6: warning: format ‘%d’ expects argument of type ‘int’, but
argument 2 has type ‘long unsigned int’ [-Wformat]
usb_storage.c: In function ‘usb_stor_BBB_reset’:
usb_storage.c:442:2: warning: format ‘%X’ expects argument of type ‘unsigned
int’, but argument 3 has type ‘long unsigned int’ [-Wformat]
usb_storage.c:448:2: warning: format ‘%X’ expects argument of type ‘unsigned
int’, but argument 3 has type ‘long unsigned int’ [-Wformat]
usb_storage.c:454:2: warning: format ‘%X’ expects argument of type ‘unsigned
int’, but argument 3 has type ‘long unsigned int’ [-Wformat]
usb_storage.c: In function ‘usb_stor_CB_reset’:
usb_storage.c:482:2: warning: format ‘%X’ expects argument of type ‘unsigned
int’, but argument 3 has type ‘long unsigned int’ [-Wformat]
usb_storage.c: In function ‘usb_stor_CB_comdat’:
usb_storage.c:572:3: warning: format ‘%X’ expects argument of type ‘unsigned
int’, but argument 3 has type ‘long unsigned int’ [-Wformat]
usb_storage.c:584:4: warning: format ‘%X’ expects argument of type ‘unsigned
int’, but argument 3 has type ‘long unsigned int’ [-Wformat]
usb_storage.c: In function ‘usb_stor_BBB_transport’:
usb_storage.c:782:3: warning: format ‘%d’ expects argument of type ‘int’, but
argument 3 has type ‘long unsigned int’ [-Wformat]
usb_storage.c: In function ‘usb_stor_CB_transport’:
usb_storage.c:807:2: warning: format ‘%X’ expects argument of type ‘unsigned
int’, but argument 3 has type ‘long unsigned int’ [-Wformat]
usb_storage.c:830:3: warning: format ‘%X’ expects argument of type ‘unsigned
int’, but argument 2 has type ‘long unsigned int’ [-Wformat]
usb_storage.c:857:3: warning: format ‘%d’ expects argument of type ‘int’, but
argument 2 has type ‘long unsigned int’ [-Wformat]

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Remy Bohmer <linux@bohmer.net>
2011-10-27 23:54:03 +02:00
Marek Vasut
86bd3ff8fd GCC4.6: Squash warning in usb_storage.c
usb_storage.c: In function ‘usb_stor_CB_reset’:
usb_storage.c:466:6: warning: variable ‘result’ set but not used
[-Wunused-but-set-variable]

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27 23:54:03 +02:00
Marek Vasut
5bbe10dd2e GCC4.6: Squash warning in cmd_ide.c
cmd_ide.c: In function ‘ide_read’:
cmd_ide.c:1227:2: warning: format ‘%LX’ expects argument of type ‘long long
unsigned int’, but argument 3 has type ‘lbaint_t’ [-Wformat]

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27 23:54:03 +02:00
Marek Vasut
88ec8c1246 GCC4.6: Squash warnings in common/usb.c
usb.c: In function ‘usb_parse_config’:
usb.c:331:17: warning: variable ‘ch’ set but not used
[-Wunused-but-set-variable]
usb.c: In function ‘usb_hub_port_connect_change’:
usb.c:1123:29: warning: variable ‘portchange’ set but not used
[-Wunused-but-set-variable]
usb.c: In function ‘usb_hub_configure’:
usb.c:1183:25: warning: variable ‘hubsts’ set but not used
[-Wunused-but-set-variable]

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>
2011-10-27 23:54:03 +02:00
Aneesh V
2d01dd953a omap: spl: fix build break due to changes in FAT
FAT library now uses malloc() and free(). But SPL doesn't
have heap until now. Setup a heap in SDRAM to fix this issue.

However this increases SPL footprint beyond the available SRAM
budget. So, compile out some fancy features in the SDARM init
bring back footprint under control

CC: Sandeep Paulraj <s-paulraj@ti.com>
CC: Wolfgang Denk <wd@denx.de>
Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-10-27 21:56:35 +02:00
Lei Wen
5ff8b35412 ARM: orion5x: reduce dependence of including platform file
For files like the drivers/serial/serial.c, it must include the
platform file, as the CONFIG_SYS_NS16550_COM1 must reference to
the definition in the platform definition files.

Include the platform definition file in the config file, so that it
would decouple the dependence for the driver files.

Signed-off-by: Lei Wen <leiwen@marvell.com>
2011-10-27 21:56:33 +02:00
Heiko Schocher
ee4014b005 arm, logbuffer: make it compileclean
Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
2011-10-27 21:56:30 +02:00
Simon Glass
2d46cf291e net: tftpput: add tftpput command
This adds the tftpput command to U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2011-10-26 21:36:46 +02:00
Simon Glass
1aec244acf tftpput: add save_addr and save_size global variables
We need something akin to load_addr to handle saving data.

Signed-off-by: Simon Glass <sjg@chromium.org>
2011-10-26 21:35:43 +02:00
Simon Glass
e4bf0c5cfe net: tftpput: Rename TFTP to TFTPGET
This is a better name for this protocol. Also remove the typedef to keep
checkpatch happy, and move zeroing of NetBootFileXferSize a little
earlier since TFTPPUT will need to change this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2011-10-26 21:33:42 +02:00
Simon Glass
d67f10ce0f Add setenv_ulong() and setenv_addr()
It seems we put numbers and addresses into environment variables a lot.
We should have some functions to do this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2011-10-26 21:32:42 +02:00
Simon Glass
3cce8a5496 Move simple_itoa to vsprintf
This function is generally useful and shouldn't hide away in hush. It
has been moved as is.

Signed-off-by: Simon Glass <sjg@chromium.org>
2011-10-26 21:32:15 +02:00
Stefano Babic
4962e38e9a mkimage: adding support for Davinci AIS image
Some Davinci processors supports the Application
Image Script (AIS) boot process. The patch adds the generation
of the AIS image inside the mkimage tool to make possible
to generate a bootable U-boot without external tools
(TI Davinci AIS Generator).

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Wolfgang Denk <wd@denx.de>
2011-10-23 23:34:21 +02:00
Simon Glass
4a9b413108 Add getenv_ulong() to read an integer from an environment variable
This is not an uncommon operation in U-Boot, so let's put it in a common
function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-23 23:32:45 +02:00
Daniel Schwierzeck
3668d8fa04 common: fix missing function pointer relocation in fixup_cmdtable()
In commit fa28bd2eef patch v1 was applied
instead of v2. This is an incremental patch to update that commit
to version 2.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2011-10-23 23:32:44 +02:00
Dirk Eibach
b88e7b3cc0 hwmon: Provide dtt_init()
Our boards rely on dtt for initialization of fan hardware.
dtt_init() was implemented to be called form board specific code.

Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Acked-by: Heiko Schocher <hs@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>
2011-10-22 01:22:21 +02:00
Joe Hershberger
b3f44c21ea common: cosmetic: CONFIG_BOOTFILE checkpatch compliance
Remove MK_STR from places that consume CONFIG_BOOTFILE to force all definitions to be string literals.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-22 01:21:35 +02:00
Joe Hershberger
8b3637c662 common: cosmetic: CONFIG_ROOTPATH checkpatch compliance
Remove MK_STR from places that consume CONFIG_ROOTPATH to force all definitions to be string literals.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-22 01:21:15 +02:00
Stephen Warren
712fbcf384 checkpatch whitespace cleanups
This avoids the following checkpatch warning in later patches:

ERROR: "(foo*)" should be "(foo *)"
ERROR: space required before the open brace '{'
ERROR: space prohibited before that close parenthesis ')'
ERROR: spaces required around that '||' (ctx:WxV)
WARNING: space prohibited between function name and open parenthesis '('
WARNING: line over 80 characters

This fixes all the white-space warnings/errors in my subsequent patch,
and within this current patch. A number of other checkpatch warnings
and errors are still present in this patch itself, but are beyond simple
whitespace fixes, so are not solved by this patch.

v2: New patch

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2011-10-22 01:13:35 +02:00
Macpaul Lin
64d614617f nds32: common bdinfo, bootm, image support
Add support of NDS32 to common commands bdinfo, bootm, and image format.

Signed-off-by: Macpaul Lin <macpaul@andestech.com>
2011-10-22 00:54:06 +02:00
Timur Tabi
0c277ef9f9 cmd_bdinfo: replace print_str() with print_mhz()
The print_str() helper function for cmd_bdinfo can print any string, but it
is only used to print MHz values.  Replace it with print_mhz() that takes
a number and converts it to a string internally.

Signed-off-by: Timur Tabi <timur@freescale.com>
2011-10-22 00:49:18 +02:00
Simon Schwarz
dee17768d4 removed static from images in cmd_bootm.c
This removes static modifier from images variable in cmd_bootm.c.

Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com>
2011-10-21 23:56:17 +02:00
Wolfgang Denk
02aff558f4 Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
* 'master' of git://git.denx.de/u-boot-mpc85xx:
  mpc85xx: Add inline GPIO acessor functions
  powerpc/85xx: wait for alignment before resetting SERDES RX lanes (SERDES9)
  powerpc/85xx: Fix P2020DS booting
  powerpc/85xx: Update USB device tree status based on pin settings
  fdt: Add new fdt_set_node_status & fdt_set_status_by_alias helpers
  powerpc/85xx: Add support for RMan LIODN initialization
  powerpc/85xx: Update device tree handling for SRIO
  powerpc/85xx: Update setting of SRIO LIODNs
  fm: Don't allow disabling of FM1-DTSEC1
  fm-eth: Don't mark the MAC we use for MDIO as disabled in device tree
2011-10-21 23:48:46 +02:00
Doug Anderson
3a8653b3ac cosmetic: Fixup fixup_silent_linux() for checkpatch
Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Anton Staaf <robotboy@chromium.org>
2011-10-20 16:38:08 +02:00
Shengzhou Liu
2a523f5240 fdt: Add new fdt_set_node_status & fdt_set_status_by_alias helpers
Add common function fdt_set_node_status() to assist in various locations
that we set a nodes status.  This function utilizes the status values
that are part of the EPAPR spec (on power.org).

fdt_set_status_by_alias() is based on fdt_set_node_status() but uses an
alias string to identify the node to update.

We also add some shortcut functions to help the common cases of setting
"okay" and "disabled":

	fdt_status_okay()
	fdt_status_disabled()
	fdt_status_okay_by_alias()
	fdt_status_disabled_by_alias()

Finally, we fixup the corenet_ds ethernet code which previously had
a function by the same name that can be replaced with the new helpers.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Gerald Van Baren <vanbaren@cideas.com>
2011-10-18 00:36:55 -05:00
Simon Glass
925493582c sandbox: Use uintptr_t for 32/64-bit compatibility
This fixes a problems when building on some 64-bit machines.

Signed-off-by: Simon Glass <sjg@chromium.org>
2011-10-17 23:56:59 +02:00
Simon Glass
fe34107e38 sandbox: Disable built-in malloc
We prefer to U-Boot's malloc but for now it is easier to use the C library's
version.

Signed-off-by: Simon Glass <sjg@chromium.org>
2011-10-17 23:56:57 +02:00
Simon Glass
6d6f123632 sandbox: Add bootm support
This adds sandbox architecture support to bootm, although it is probably
not useful to load sandbox code into the address space and execute it.

This change at least make the file build correctly on 64-bit machines.

Signed-off-by: Simon Glass <sjg@chromium.org>
2011-10-17 23:56:57 +02:00
Simon Glass
6fcc3be453 sandbox: Add board info for architecture
This is required for the bdinfo command to work.

Signed-off-by: Simon Glass <sjg@chromium.org>

Fix syntax error.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-10-17 23:56:46 +02:00
Simon Glass
0ec2ce4a67 Fix use of int as pointer in image.c
It is better to use %p in this case.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-17 22:46:13 +02:00
Jason Hobbs
06283a6401 Add pxe command
Add pxe command, which is intended to mimic PXELINUX functionality.
'pxe get' uses tftp to retrieve a file based on UUID, MAC address or IP
address. 'pxe boot' interprets the contents of PXELINUX config like file
to boot using a specific initrd, kernel and kernel command line.

This patch also adds a README.pxe file - see it for more details on the
pxe command.

Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com>
2011-10-17 22:25:35 +02:00
Jason Hobbs
4d91a6ecab Replace space and tab checks with isblank
These are various places I found that checked for conditions equivalent
to isblank.

Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com>
2011-10-17 22:25:34 +02:00
Jason Hobbs
ce2d4c9532 cosmetic: remove unneeded curly braces
This prevents a checkpatch warning in the patch to use isblank

Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com>
2011-10-17 22:25:34 +02:00
Jason Hobbs
c8a2079e49 common: add run_command2 for running simple or hush commands
Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-17 22:25:34 +02:00
Jason Hobbs
b41bc5a82d common, menu: use abortboot for menu timeout
Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com>
2011-10-17 22:25:33 +02:00
Jason Hobbs
b69bf52dfe Add generic, reusable menu code
This will be used first by the pxe code, but is intended to be
generic and reusable for other jobs in U-boot.

Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com>
2011-10-17 22:25:33 +02:00
Daniel Schwierzeck
fa28bd2eef common: fix missing function pointer relocation in fixup_cmdtable()
The command auto-completion does not work on architectures relying
on CONFIG_NEEDS_MANUAL_RELOC like MIPS. Cause is the missing function
pointer fixup for cmd_tbl_t::complete function in fixup_cmdtable().

This patch adds the missing pointer fixup in case of CONFIG_AUTO_COMPLETE
is defined.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2011-10-15 22:19:36 +02:00
Timur Tabi
50bf17bd15 fdt: update fdt_alloc_phandle to use fdt_get_phandle
The device tree compiler, dtc, can use "phandle" and/or "linux,phandle"
properties to specify the phandle for any node.  By default, it uses
both, but "linux,phandle" is deprecated.  One day, we'd like to stop using
"linux,phandle", but U-boot needs to support both properties equally
first.

fdt_alloc_phandle() generates a unique phandle, but it was only checking
the "linux,phandle" properties.  Instead, we use fdt_get_phandle(),
which checks both properties automatically.  This ensures that we
support dtbs that only use "phandle".

The side-effect is that fdt_alloc_phandle() now takes twice as long, since
it has to check for two properties instead of one in each node that it
searches.

Signed-off-by: Timur Tabi <timur@freescale.com>
2011-10-15 09:35:09 -04:00
Timur Tabi
3c927cccdc fdt: check for fdt errors in fdt_create_phandle
fdt_create_phandle() was ignoring errors from fdt_set_phandle().  If an
error occurs, print an error message and return 0, which is an invalid
phandle.  We also need to change the return type for fdt_create_phandle()
to indicate that it cannot return an error code.

Signed-off-by: Timur Tabi <timur@freescale.com>
2011-10-15 09:35:00 -04:00
Wolfgang Denk
fad2e1b06c common/usb.c: fix warning: variable ... set but not used
Fix:
usb.c: In function 'usb_parse_config':
usb.c:331:17: warning: variable 'ch' set but not used [-Wunused-but-set-variable]
usb.c: In function 'usb_hub_port_connect_change':
usb.c:1123:29: warning: variable 'portchange' set but not used [-Wunused-but-set-variable]
usb.c: In function 'usb_hub_configure':
usb.c:1183:25: warning: variable 'hubsts' set but not used [-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Remy Bohmer <linux@bohmer.net>
Acked-by: Remy Bohmer <linux@bohmer.net>
2011-10-09 23:24:50 +02:00
Wolfgang Denk
10f4dd784f common/cmd_usb.c: fix warning: variable ... set but not used
Fix:
cmd_usb.c: In function 'usb_show_tree_graph':
cmd_usb.c:284:29: warning: variable 'port' set but not used [-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Remy Bohmer <linux@bohmer.net>
Acked-by: Remy Bohmer <linux@bohmer.net>
2011-10-09 23:24:49 +02:00
Wolfgang Denk
419a1fe954 CFI: fix warning: variable ... set but not used
Fix:
cfi_mtd.c: In function 'cfi_mtd_init':
cfi_mtd.c:226:19: warning: variable 'mtd_list' set but not used [-Wunused-but-set-variable]
cfi_mtd.c: In function 'cfi_mtd_init':
cfi_mtd.c:225:6: warning: unused variable 'devices_found'
cfi_mtd.c: In function 'cfi_mtd_init':
cfi_mtd.c:226:19: warning: variable 'mtd_list' set but not used [-Wunused-but-set-variable]
[-Wunused-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
2011-10-09 23:24:49 +02:00
Che-liang Chiou
ca366d0e38 cmd_time: add time command
The 'time' command runs and reports execution time of commands.

Sample usage:
--------------------
u-boot# time crc 0x1000 1000
CRC32 for 00001000 ... 00001fff ==> ae94dc4b

time: 0.004 seconds, 4 ticks
--------------------

Signed-off-by: Che-Liang Chiou <clchiou@chromium.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-09 23:24:48 +02:00
Wolfgang Denk
e42624bbe0 common/image.c: remove duplicated IH_TYPE entries.
Also rearrange IH_TYPE table slightly.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-10-09 23:24:47 +02:00
Michal Simek
49a23e4a41 serial: uartlite: Support for SERIAL_MULTI
Add support for SERIAL MULTI for uartlite.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-09 23:24:47 +02:00