Commit Graph

7789 Commits

Author SHA1 Message Date
Wolfgang Denk
af75a45d23 IDE: bail out of dev_print() for unknown device types
Commit 574b319512 introduced a subtle bug by mixing a list of tests
for "dev_desc->type" and "dev_desc->if_type" into one switch(), which
then mostly did not work because "dev_desc->type" cannot take any
"IF_*" type values. A later fix in commit 8ec6e332ea changed the
switch() into testing "dev_desc->if_type", but at this point the
initial test for unknown device types was completely lost, which
resulted in output like that for IDE ports without device attached:

  Device 1: Model:  Firm:  Ser#:
            Type: # 1F #
            Capacity: not available

This patch re-introduces the missing test for unknown device types.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
2009-05-15 22:30:13 +02:00
Stefan Roese
c21f62d848 74xx_7xx: Fix rounding problem in CPU frequency calculation
This patch fixes a problem in the CPU frequency calculation. Without it
a 798MHz CPU is displayed as 368.503 MHz. And with it it's 798 MHz.

Signed-off-by: Stefan Roese <sr@denx.de>
2009-05-15 22:22:01 +02:00
Jean-Christophe PLAGNIOL-VILLARD
3ad8a0517b console.h: remove unused prototype 'console_realloc'
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-05-15 22:13:57 +02:00
Jean-Christophe PLAGNIOL-VILLARD
84bf7ca522 api: remove un-needed ifdef CONFIG_API already handle by the Makefile
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-05-15 22:13:01 +02:00
Detlev Zundel
792a09eb9d Fix e-mail address of Gary Jennejohn.
Signed-off-by: Detlev Zundel <dzu@denx.de>
2009-05-15 22:11:59 +02:00
Emil Medve
5e2c08c3ac Remove inline qualifier from show_boot_progress()
The 'inline' is conflicting with the semantic of 'weak' attribute and with the
way the show_boot_progress() function is used.

Also gcc 4.4 is complaining about it:

main.c:51: error: inline function 'show_boot_progress' cannot be declared weak

Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
2009-05-15 22:04:04 +02:00
Wolfgang Denk
fe6da48373 MPC8260: fixup device tree by property instead of path
cpu/mpc8260/cpu.c used to use do_fixup_by_path_u32() to update the
clock frequencies in the device tree, using a CPU path
"/cpus/OF_CPU", with OF_CPU beind defined in the board config file.

However, this does not work when one board config file (here:
MPC8260ADS.h) is intended to be used for several diffrent CPUs and
therefor contains a generic definition like "cpu@0", as the device
trees that will then be loaded will contain specific names like
"PowerPC,8272@0".

We switch to using do_fixup_by_prop_u32() instead, so we can search
for device_type="cpu", as it is done in other architectures, too.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>
2009-05-15 22:03:09 +02:00
Rohit Hagargundgi
12a6753155 Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN
Add CONFIG_SYS_MONITOR_LEN macro to apollon board config.
CONFIG_SYS_MONITOR_LEN defines the U-Boot image size.
and is used by OneNAND ipl when reading U-Boot image.

Signed-off-by: Rohit Hagargundgi <h.rohit at samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
2009-05-15 21:43:05 +02:00
Ben Warren
c404cc5884 Schedule removal of non-CONFIG_NET_MULTI net driver API
This will make CONFIG_NET_MULTI the only net driver configuration and
we'll be able to remove this option.

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-05-15 21:32:52 +02:00
Detlev Zundel
60bbcf0cc6 powerpc/inka4x0: Remove left-over ide reset code.
The pin which was used in preliminary versions of the board for ide
reset is really connected to the rtc clock.

Signed-off-by: Detlev Zundel <dzu@denx.de>
2009-05-15 21:31:24 +02:00
Marco Stornelli
f578a2da67 Add imls utility command
This patch adds, under tools folder, a new command called imls. Its
goal is the same of UBoot's imls but it can be used as Linux shell
command. It reads from raw mtd partition and prints the list of the
stored images.

Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
2009-05-15 21:24:23 +02:00
Heiko Schocher
da95427ce4 netloop: updates for NetLoop
Fix some issues introduced from commit:
2f70c49e5b
suggested by Mike Frysinger.

- added some comment for the env_id variable in common_cmd_nvedit.c
- moved some variables in fn scope instead of file scope
- NetInitLoop now static void

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
2009-05-15 21:19:02 +02:00
Heiko Schocher
3c1d89545d 82xx, ids8247: added ids8247 board to MAKEALL script
Signed-off-by: Heiko Schocher <hs@denx.de>
2009-05-15 21:17:27 +02:00
Detlev Zundel
890a017a8a arm/imx31_phycore: Fix bi_arch_number
Signed-off-by: Detlev Zundel <dzu@denx.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-15 10:32:40 +02:00
Sascha Hauer
ee47bfabef remove myself as phycore/litekit Maintainer
I never acked a patch that adds me as phycore i.MX31 maintainer nor was
it me who pushed the patches, so remove myself from the maintainer list
so that other people do not longer wait for my ack.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-15 10:32:38 +02:00
Sergey Lapin
c63254ef56 AFEB9260 network fix
AFEB9260 uses PA10, PA11 for ETX2 and ETX3.
Also, due to extarnal pull-up on IRQ line, Micrel PHY ID is 1 after reset sequence,
not 0.

Signed-off-by: Sergey Lapin <slapin@ossfans.org>
2009-05-13 01:17:17 +02:00
Graf Yang
f8ddcd5822 Blackfin: bf518f-ezbrd: reset ethernet PHY during init
We don't know what state the ethernet PHY is in when starting up, so make
sure we set it to a sane state.  This fixes troubles seen when Linux boots
up, configures the PHY is a non-default state, and then the system reboots
into U-Boot which previously expected a reset state only.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-05-06 08:47:37 -04:00
Mike Frysinger
53310b88ea Blackfin: bf527-ezkit: fix SPI flash env params
The BF527-EZKIT settings for storing the environment in SPI flash wasn't
using the correct sector settings for the SPI flash part that is actually
on the board.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-05-06 08:47:31 -04:00
Mike Frysinger
f58bf804a1 Blackfin: avoid get_sclk() with early serial debug
When the clock functions were changed to use cached values (and thereby
avoiding expensive math functions), early serial debug broke because the
baud programming is called before external memory is available.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-05-06 08:47:27 -04:00
Mike Frysinger
02778f2f1b Blackfin: fix booting with older bootroms (no EVT1)
When dropping jump block support, the assumption was that all bootroms
supported entry point redirection via the EVT1 register.  Unfortunately,
this turned out to be incorrect for the oldest Blackfin parts (BF533-0.2
and older and BF561).  No one really noticed earlier because these parts
usually are booted by bypassing the bootrom entirely, and older BF533
parts are not supported at all (too many anomalies).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-05-06 08:47:21 -04:00
Mike Frysinger
af2c37378f Blackfin: recurse with early serial initcode
Make sure we recurse through serial_putc() rather than bang on the UART
transmit register directly to avoid hardware overflows when using \n.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-05-06 08:47:16 -04:00
Wolfgang Denk
6b8edfde22 Prepare v2009.06-rc1
Update CHANGELOG.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-05-01 22:02:22 +02:00
Jean-Christophe PLAGNIOL-VILLARD
6b2beb5626 at91: remove lowlevel_init.S
lowlevel_init.S is not used any more so remove it.
As consequence, we also don't have to generate u-boot.lds
but can use a static version as before.

This also fixes the out-of-tree build problem introduced
with commit f0a2c7b4 "at91: add support for the PM9263 board"

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-05-01 21:24:41 +02:00
Wolfgang Denk
0ee7a31047 Update CHANGELOG; minor coding style cleanup.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-05-01 00:16:11 +02:00
Manikandan Pillai
d3a513c23b OMAP3: Fix timer handling to 1ms and CONFIG_SYS_HZ to 1000
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
2009-04-30 23:56:01 +02:00
Wolfgang Denk
9d5e4d3681 Merge branch 'master' of /home/wd/git/u-boot/custodians 2009-04-30 23:54:07 +02:00
Dirk Behme
ac9140037a OMAP3: Beagle: Set pinmux conditionally for Rev C boards
The Beagle Rev C boards pull UART2 from an alternate set of balls.

Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
2009-04-30 23:53:59 +02:00
Ricardo Ribalda Delgado
c1a0fd5f28 ubifs: BUG: Blocks commpressed with zlib
Blocks compressed with zlib dont have the full gzip header.

Without this patch, block compressed with zlib cannot be readed!

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
2009-04-30 23:07:04 +02:00
Ricardo Ribalda Delgado
35f6a943f7 lib_generic: gunzip: New function zunzip
Separate gunzip in

gunzip: Find the end of the header and call zunzip.
zunzip: Inflate gunzip block without header.

UBI fs blocks can be compresed in lzo, zlib or no-compression. The
current implementation of u-boot supported all the compressions but
there was a bug in the implementation of the zlib blocks.

UBIFS's Zlib blocks do not have header but they were compressed using
gunzip, a function used to decompress gunzip files/sectors with a
header.

This patch adds a new function zunzip that uncompress a zlib block with
no header.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
2009-04-30 23:07:02 +02:00
Wolfgang Denk
ccb71dfac9 Merge branch 'master' of git://git.denx.de/u-boot-arm 2009-04-30 23:01:08 +02:00
Wolfgang Denk
bf2ba6d46e Merge branch 'master' of git://git.denx.de/u-boot-cfi-flash 2009-04-30 22:59:45 +02:00
Wolfgang Denk
faf4fe7608 Merge branch 'master' of git://git.denx.de/u-boot-video 2009-04-30 22:58:17 +02:00
Daniel Gorsulowski
a1e5f93185 at91: fixed plla calc when no USB support is active
Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-29 21:42:34 +02:00
Ladislav Michl
3791a1187c arm925t: Fix CONFIG_SYS_HZ to 1000
Let CONFIG_SYS_HZ to have value of 1000 effectively fixing all users of
get_timer.

Changes since original version:
* Set PTV=2 (divisor 8) for boards using 12MHz timer clock source to
  improve timer resolution.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2009-04-29 21:39:46 +02:00
Dirk Behme
42bf4b2248 OMAP3: Remove legacy NAND defines
Remove remaining legacy NAND defines for Beagle, EVM, Overo and Pandora.

Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
2009-04-29 21:17:43 +02:00
Sanjeev Premi
cba0b778dd OMAP3: Print correct silicon revision
The function display_board_info() displays incorrect
silicon revision - based on the return value from
function get_cpu_rev().

This patch fixes the problem.

Signed-off-by: Sanjeev Premi <premi@ti.com>
2009-04-29 21:11:49 +02:00
Sanjeev Premi
90006e9b33 OMAP3: Remove unused board-types
The board-types defined in struct omap3_sysinfo seem to be
unused. The function display_board_info() is passed
board type as an argument; which is ignored.

This patch removes all uses of board-type, related definitions
and functions.

Signed-off-by: Sanjeev Premi <premi@ti.com>
2009-04-29 21:11:40 +02:00
Sanjeev Premi
6a6b62e3aa OMAP3: Use functions print_cpuinfo() and checkboard()
Use the functions print_cpuinfo() and checkboard() to
display the cpu and board specific information.

These functions reuse content from the existing function
display_board_info() - which has been removed.

Also, updated the existig OMAP3 configurations to
define:
 - CONFIG_DISPLAY_CPUINFO
 - CONFIG_DISPLAY_BOARDINFO

Signed-off-by: Sanjeev Premi <premi@ti.com>
2009-04-29 21:11:32 +02:00
Stefan Roese
f8e2b3107e MTD: Change cfi-mtd to accept non-uniform sector sizes
With this patch non-uniform NOR FLASH chips (chips with multiple erase
regions) can be exported via the cfi-mtd layer and therefor used by UBI.
We select the largest sector size as erasesize. The cfi driver will make
sure that the smaller sectors are handled correctly.

Signed-off-by: Stefan Roese <sr@denx.de>
2009-04-29 11:06:06 +02:00
Anatolij Gustschin
3dcbe628d6 video: fix bug in cfb_console.c code
Fix bug in drawing long version/info strings:
U-Boot version string like
"U-Boot 2009.03-05647-g7c51e06 (Apr 23 2009 - 12:40:00) MPC83XX"
is long and doesn't wrap around correctly while drawing
beside the logo. Such long strings partially overwrite
the logo. This patch is an attempt to fix it.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2009-04-28 10:55:13 +02:00
Wolfgang Denk
4d9eab89b3 cmd_ext2.c: fix compile warnings
Get rid of these warnings:

cmd_ext2.c:247: warning: format '%ld' expects type 'long int', but argument 2 has type 'int'
cmd_ext2.c:248: warning: format '%lX' expects type 'long unsigned int', but argument 3 has type 'int'

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-04-28 08:50:31 +02:00
Heiko Schocher
28afe0160f ids8247: Remove legacy NAND defines
because legacy NAND support is deprecated converting to current
NAND interface. !This just compile, because I have no more the
hardware to test it.

Signed-off-by: Heiko Schocher <hs@denx.de>
2009-04-28 01:22:59 +02:00
Ricardo Ribalda Delgado
dbd3361440 ubifs: BUG realpath string must be ended with NULL
If the memory used to copy the link_make is "dirty" the string wont
be ended with NULL, throwing out multiple memory bugs.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Acked-by: Stefan Roese <sr@denx.de>
2009-04-28 01:21:36 +02:00
Peter Tyser
65351a8793 bmp_logo: Check return value of fread()
Add basic error handling to fread() function calls.  This prevents
compililation warnings such as:

bmp_logo.c: In function ‘main’:
bmp_logo.c:71: warning: ignoring return value of ‘fread’, declared with
attribute warn_unused_result
...

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-28 01:16:50 +02:00
Peter Tyser
eea8be86d1 ncb: Check return value of write()
This prevents the compilation warning:

ncb.c: In function 'main':
ncb.c:32: warning: ignoring return value of ‘write’, declared with
attribute warn_unused_result

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-28 01:16:46 +02:00
Stefan Roese
dbe29e36a4 mtd: nand/onenand: Register mtd device upon device scanning
With this patch the NAND and OneNAND devices are registered in the MTD
subsystem and can then be referenced by the mtdcore code (e.g.
get_mtd_device_nm()). This is needed for the new "ubi part" command
syntax without the flash type parameter (nor|nand|onenand).

Signed-off-by: Stefan Roese <sr@denx.de>
2009-04-28 01:15:38 +02:00
Stefan Roese
10bb62d85a mtd: nand: Include linux/mtd/partitions.h in nand_base.h
This patch removes this compilation warning when CONFIG_MTD_PARTITIONS is
defined:

nand_base.c: In function 'nand_release':
nand_base.c:2922: warning: implicit declaration of function 'del_mtd_partitions'

Signed-off-by: Stefan Roese <sr@denx.de>
2009-04-28 01:15:37 +02:00
Stefan Roese
2d579e5060 ubi: Remove flash selection parameter (nor|nand|onenand) from "ubi part"
This patch removes the now unnecessary flash type parameter from the
"ubi part" command. Currently the user has to define the type of flash
he will be using UBI on. Example:

=> ubi part nor partition1

With this patch this type parameter is not needed anymore. The user can
now select the partition directly without the flash type paramter.
Example:

=> ubi part partition1

This breaks backward compatibility right now because of the change in the
command syntax. But UBI support is still quite fresh and the advantage of
this new command is syntax big enough for this change. Additionally the
code is much cleaner now.

Signed-off-by: Stefan Roese <sr@denx.de>
CC: Kyungmin Park <kyungmin.park@samsung.com>
2009-04-28 01:15:35 +02:00
Detlev Zundel
294f10ca9e mips/vcth: Use generic 16550 uart driver
As the common code also handles baudrate switching, which the board
specific vct.c driver did not support, this is one of the rare
occassions where deleting code actually adds a feature :)

Signed-off-by: Detlev Zundel <dzu@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
2009-04-28 01:10:24 +02:00
Ladislav Michl
0c8a84916c Separate mtdparts command from jffs2
On Thu, Mar 19, 2009 at 01:30:36PM +0100, Stefan Roese wrote:
> Currently the mtdparts commands are included in the jffs2 command support.
> This doesn't make sense anymore since other commands (e.g. UBI) use this
> infrastructure as well now. This patch separates the mtdparts commands from
> the jffs2 commands making it possible to only select mtdparts when no JFFS2
> support is needed.

One more leftover... Let nboot command know about partitions even if JFFS2
support is not enabled.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Stefan Roese <sr@denx.de>
2009-04-28 01:06:24 +02:00