Commit Graph

1262 Commits

Author SHA1 Message Date
Tom Rini
a80e03683b drivers: ata: Remove mvsata_ide driver
The mvsata_ide driver was due for DM conversion by v2019.07.  As that
has long passed, remove the driver and disable it in the boards which
had enabled it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:59:30 -04:00
Harm Berntsen
4a8eac6245 configs: remove obsolete CONFIG_MVEBU_MMC
All usages of this have been removed

Signed-off-by: Harm Berntsen <harm.berntsen@nedap.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
CC: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-08 08:50:52 +02:00
Harm Berntsen
594412c79e configs: remove obsolete CONFIG_SYS_MMC_BASE
All usages of this have been removed

Signed-off-by: Harm Berntsen <harm.berntsen@nedap.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
CC: Simon Glass <sjg@chromium.org>
2021-04-08 08:50:52 +02:00
Simon Glass
48f45455bf Convert CONFIG_MISC_INIT_F to Kconfig
This converts the following to Kconfig:
   CONFIG_MISC_INIT_F

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-06 16:33:19 +12:00
Simon Glass
4b5019e3e5 dtc: Update the build rule for pylibfdt
Some versions of make complain about using a grouped target without a
recipe:

.../pylibfdt/Makefile:36: *** grouped targets must provide a recipe.  Stop.

Fix this by adding a dummy recipe.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-04-06 16:33:10 +12:00
Simon Glass
354d232463 Makefile: Remove old of-platdata files before regenerating
Which files we generate depends on the setting of OF_PLATDATA_INST in the
build. This might change between builds, but the build directory may be
reused.

Leaving old files around is confusing and switching the OF_PLATDATA_INST
setting does not necessarily regenerate the files, e.g. if the devicetree
has not changed.

Remove all the files before regenerating new ones.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-26 17:03:08 +13:00
Simon Glass
56b313d1b6 Makefile: Use a variable for generated of-platdata headers
There are actually two generated files but only one is currently mentioned
in the Makefile as a dependency. Put them both in a Makefile variable and
use that instead, to avoid inconsistency.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-26 17:03:08 +13:00
Simon Glass
13d71152f1 Makefile: Depend only on required of-platdata files
When OF_PLATDATA_INST is enabled, we need dt-uclass.c and dt-device.c for
the build to work. When OF_PLATDATA_INST is not enabled, we only need
dt-plat.c

Update the Makefile rules to indicate this.

At present all files are generated and compiled regardless of which are
actually needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-26 17:03:08 +13:00
Simon Glass
6519da4741 Makefile: Avoid running dtoc every time
Since the dst_dir rule always runs, it causes a rebuild of the of-platdata
files even if not needed.

Create the directory inside the rule instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-26 17:03:08 +13:00
Simon Glass
91f414b3a8 libfdt: Tidy up pylibfdt build rule
At present the build rule for pylibfdt depends on _libfdt.so but modern
Python versions add a different suffix to the output file, resulting in
something like _libfdt.cpython-38-x86_64-linux-gnu.so

The result is that pylibfdt is rebuilt every time.

Rename the file the standard name so that the rule works correctly. Also
add libfdt.py to the dependencies, so that file is always created if
missing.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-26 17:03:04 +13:00
Simon Glass
4c6f65074e dm: Add the new dtoc-generated files to the build
Now that dtoc generates some new C files, add these to the build so that
the instantiated devices and uclasses can be used.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-22 19:23:28 +13:00
Simon Glass
5a1b25c201 dm: of-platadata: Add option for device instantiation
Add Kconfig options to support build-time device instantiation. When
fully implemented, this will allow dtoc to create U-Boot devices (i.e.
struct udevice records) at build time, thus reducing code space in
SPL.

For now this defaults to off, but will be enabled when the rest of
the implementation is in place.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-22 19:23:27 +13:00
Simon Glass
67c053341f Makefile: Pass the U-Boot phase to dtoc
Pass the U-Boot phase as a parameter so dtoc can use it. At present it is
ether "spl" or "tpl".

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-22 19:23:27 +13:00
Tom Rini
22fc991daf Prepare v2021.04-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmBPhiUACgkQFHw5/5Y0
 tywChgv/RYpdSKrD5s4kCJnImfOwDznESj/CqAQK3Au5zviq7qXRrgxyTKv2e1wM
 W51vUBd0cE1YTACXqbr92wSSyqoTthLqd57KQgVele5uC2dvkqVTSvjPOUwtyIbQ
 BTPkoQnHPn30AILRdPjpEdBGfZhJDDtJFdQopn6h4GjEjPKVH8Wx1Dd+V6SD5f20
 WiksUjgdjMr1AmORY+LdwwJO8FZrGGPYgs8CDtiqxmCSwh3d7kUFFTT+G23BZdo7
 M+81+1uIUaW2Bolds7ZTPrrjr8bPwkWoTqNYhUB4bNPLp72gwnjM1rtU1X3hyiJM
 MdxSBimLHUOYPihfeSYCHSUrJaQFAAEFkuzWfZN1fgoswKEZQIVVVTzT/TomTyqf
 1DIXD+0HpXGKgVLW/Nkpl4D+UFjR865XI4kiuDxddjKI7bGbvDlbZ/k3PNelD7op
 umUswHnC3OTSw/g+A9VH/zf1rMFNLfu++vD7XJtdoWlcsl6x6/6Fh75tuC6K/X0K
 caPmehD3
 =ENym
 -----END PGP SIGNATURE-----

Merge tag 'v2021.04-rc4' into next

Prepare v2021.04-rc4
2021-03-15 12:15:38 -04:00
Tom Rini
6ad0769c8e configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-03-15 10:50:47 -04:00
Pali Rohár
15942805b7 arm: mvebu: a38x: Remove dead code ARMADA_39X
Config option ARMADA_39X is never set so remove all dead code hidden under
ifdef CONFIG_ARMADA_39X blocks.

Also remove useless checks for CONFIG_ARMADA_38X define as this macro is
always defined for a38x code path.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-03-12 07:44:21 +01:00
Dalon Westergreen
9773ebcfbc Makefile: socfpga: Add target to generate hex output for combined spl and dtb
Add target to Makefile to generate "u-boot-spl-dtb.hex" for Intel
SOCFPGA SOC64 devices (Stratix 10 and Agilex). "u-boot-spl-dtb.hex"
is hex formatted spl with and offset of CONFIG_SPL_TEXT_BASE. It
combines the spl image and dtb. "u-boot-spl-dtb.hex" is needed to
generate the final configuration bitstream for Intel SOCFPGA SOC64
devices.

Signed-off-by: Dalon Westergreen <dalon.westergreen@intel.com>
Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-03-08 10:59:12 +08:00
Rajesh Bhagat
c8c0170f19 configs: fsl: move via specific defines to Kconfig
Moves below via specific defines to Kconfig:

	CONFIG_FSL_VIA

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05 10:25:41 +05:30
Rajesh Bhagat
504debcd8c configs: fsl: move bootrom specific defines to Kconfig
Moves below bootrom specific defines to Kconfig:

    CONFIG_SYS_FSL_BOOTROM_BASE
    CONFIG_SYS_FSL_BOOTROM_SIZE

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05 10:25:41 +05:30
Jagan Teki
5d235324ae video: sunxi_display: Convert to DM_VIDEO
DM_VIDEO migration deadline is already expired, but around
80 Allwinner boards are still using video in a legacy way:

===================== WARNING ======================
This board does not use CONFIG_DM_VIDEO Please update
the board to use CONFIG_DM_VIDEO before the v2019.07 release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

Convert the legacy video driver over to the DM_VIDEO framework. This is
a minimal conversion: it doesn't use the DT for finding its resources,
nor does it use DM clocks or DM devices for the outputs (LCD, HDMI, CVBS).

Tested in Bananapi M1+ Plus 1920x1200 HDMI out. (Jagan)

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Andre: rebase and smaller fixes]
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-03-03 10:03:15 +01:00
Tom Rini
20ecfbe931 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-03-02 09:36:23 -05:00
Roger Pau Monne
e420a38fa6 build/DTC: fix sed usage in DTC command
Current sed usage in the DTC command relies on GNU sed specific -i
option which has a slightly different syntax for BSD sed and always
expects an extension to be provided in order to create a backup file.

Instead drop the cat concatenation done before the sed call and use
sed itself to edit and concatenate the files.

No functional change intended.

Signed-off-by: Roger Pau Monné <royger@FreeBSD.org>
2021-02-24 16:51:48 -05:00
Roger Pau Monne
9907847245 scripts/check-config.sh: fix to be compatible with BSD sed
Fist use extended regexp in order to drop the '\' around the
parentheses which is not supported by BSD sed in regular mode.

Secondly use [[:blank:]] instead of \s, as the later is a GNU
extension.

No functional change intended.

Signed-off-by: Roger Pau Monné <royger@FreeBSD.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-02-24 16:51:48 -05:00
Wasim Khan
402558b1fe cmd: fdt: skip board specific fixup using env variable
Sometimes it is useful to boot OS with already fixed-up
device tree. Check for env variable 'skip_board_fixup'
before calling ft_board_setup().
Current behaviour is unchanged, additionally user can
set skip_board_fixup to 1 to skip the fixup.

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
2021-02-24 16:51:48 -05:00
Tom Rini
a3ddc776fa - splash_source warning fix when building with 64-bit toolchains
- lq123p1jx31 and nv101wxmn51 compatible in simple panel driver
  - remove not used mb862xx driver
  - add Himax HX8238D panel driver
  - s/video_uc_platdata/video_uc_plat/
 -----BEGIN PGP SIGNATURE-----
 
 iGwEABECACwWIQSC4hxrSoIUVfFO0kRM6ATMmsalXAUCYDOevA4cYWd1c3RAZGVu
 eC5kZQAKCRBM6ATMmsalXNaAAJ0RUysoiZFAddxyrW7otwe+xxmdTACbBcVXCPuX
 W41gJtQyftU4rMGbMoo=
 =iAX1
 -----END PGP SIGNATURE-----

Merge tag 'video-for-v2021.04-rc3' of https://gitlab.denx.de/u-boot/custodians/u-boot-video

 - splash_source warning fix when building with 64-bit toolchains
 - lq123p1jx31 and nv101wxmn51 compatible in simple panel driver
 - remove not used mb862xx driver
 - add Himax HX8238D panel driver
 - s/video_uc_platdata/video_uc_plat/
2021-02-22 09:11:27 -05:00
Andre Przywara
e036a1d227 fdt/sunxi: Remove OF_STDOUT_PATH
OF_STDOUT_PATH was meant to hold the devicetree path to the serial
console, to be put into the linux,stdout-path property of the chosen node.

The only user of that was sunxi, and it was actually wrong for years
there: the paths hardcoded in sunxi_common.h were not matching the DTs,
evident by the leading 0's in nodenames, which have been removed years
ago.

On top of that, "linux,stdout-path" is now deprecated for a while (Linux
commit 2a9d832cc9aae from November 2014), and also all modern DTs
(including those included in U-Boot) carry a "stdout-path" property
already.

So remove the stanza from sunxi_common.h, and, since this was the last
user, also remove the associated bits from the rest of U-Boot.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-02-19 23:29:47 +00:00
Heinrich Schuchardt
9c1e098fb9 video: eliminate unused drivers/video/mb862xx.c
The mb862xx driver does not conform to the driver model and is unused.
Eliminate it.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-02-19 22:35:49 +01:00
Simon Glass
124c255731 libfdt: Check for multiple/invalid root nodes
It is possible to construct a devicetree blob with multiple root nodes.
Update fdt_check_full() to check for this, along with a root node with an
invalid name.

CVE-2021-27097

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Bruce Monroe <bruce.monroe@intel.com>
Reported-by: Arie Haenel <arie.haenel@intel.com>
Reported-by: Julien Lenoir <julien.lenoir@intel.com>
2021-02-15 22:31:53 -05:00
Tom Rini
6144438fb5 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-15 13:34:30 -05:00
Tom Rini
472a716b8f configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-29 13:56:04 -05:00
Stefan Roese
a7a029d14d pci: Remove CONFIG_PCI_ENUM_ONLY as it's not used (any more)
This patch completely removes CONFIG_PCI_ENUM_ONLY from the PCI code as
it is not configured for any board (any more). With this removal, some
PCI related files get cleaned up a bit.

Additional, dm_pciauto_setup_device() is now static, as it's not
referenced from any code outside of this C file.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-27 17:03:16 -05:00
Heinrich Schuchardt
98f01cf7a2 doc: update Kernel documentation build system
Update the documentation build system according to Linux v5.11-rc1.

Deactive the automarkup.py extension module which on Gitlab CI is
incompatible with Unicode.

With this patch we can build the HTML documentation using either of
Sphinx 2 and Sphinx 3.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-01-27 12:52:57 +01:00
Tom Rini
e716c90229 Revert "doc: update Kernel documentation build system"
Unfortunately we now see a number of now-fatal warnings about duplicate
labels.  It is often unclear how best to re-write the document in
question to not duplicate these otherwise logical headings.

This reverts commit 10a1df3cd4.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-23 12:51:37 -05:00
Heinrich Schuchardt
10a1df3cd4 doc: update Kernel documentation build system
Update the docomentation build system according to Linux v5.11-rc1.

With this patch we can build the HTML documentation using either of
Sphinx 2 and Sphinx 3.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
[Fix warning in b4860qds.rst about "Switch Settings"]
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-23 09:53:17 -05:00
Andre Przywara
acd832cd8c sunxi: Use mkimage for SPL boot image generation
Switch the SPL boot image generation from using mksunxiboot to the new
sunxi_egon format of mkimage.

Verified to create identical results for all 152 Allwinner boards.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Samuel Holland <samuel@sholland.org>
2021-01-11 23:19:33 +00:00
Tom Rini
b11f634b1c Driver model: make some udevice fields private
Driver model: Rename U_BOOT_DEVICE et al.
 dtoc: Tidy up and add more tests
 ns16550 code clean-up
 x86 and sandbox minor fixes for of-platdata
 dtoc prepration for adding build-time instantiation
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl/09LURHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIrebjwwf/fHRjYsAY/Yj/+y1xgo3L3sphIvQUqTDF
 KkLl+kHdV5r8W/HJULxLQcF2r7pcPEI6TAQxuj3qQ5SUvm2HviS8GHGPawDEwyht
 HgBp9VD56+HUadMfnbG//DVS73ycbL4XSKlYqpkINEejtnlttsCIawUXX5cTyGM/
 59VkgnKrKvJQRUXvYLa8MTugTs4fkPJGDqhActBk/7SP1SImj+rfalNSqA2/dx6y
 2RnPCSzB1x2231KSj+B1NgGlR3Xb8P8zgh20ijcEU/hrlXBTZyi7K7f4SJR30Efu
 LYkkuj4VbxcV/25RozR0fmknqCs0QyAI+/dql6TNtbTSPC/jAfj0jQ==
 =9kN3
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-5jan21' of git://git.denx.de/u-boot-dm into next

Driver model: make some udevice fields private
Driver model: Rename U_BOOT_DEVICE et al.
dtoc: Tidy up and add more tests
ns16550 code clean-up
x86 and sandbox minor fixes for of-platdata
dtoc prepration for adding build-time instantiation
2021-01-05 22:34:43 -05:00
Tom Rini
720620e691 Prepare v2021.01-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAl/0YVIACgkQFHw5/5Y0
 tywtEwv/cJWlKgcSnYjuJrxwuJdauUTfXdbUgtCxOtBw/BP4dsKkbGTJPw5q5M+4
 LJJSKyksmJVTX26h1dpkzQjOpWtTDnWqm5CTIxD52oQD7pxK+zCQ9T6S+QbQD0Se
 ogHmZluzFoluxbNgo8tiO52xvMhDO3TVAzxsNDdGfkd5/tAXOHClPc34RmAkdRHU
 VsR89AKdT2q543fiUfrRZYDzdctaNWhRGXMDcJ4+QU/8hQhrpcr8EtHbF+3mWX4K
 pA01pDz150Rn4UI6S2xKEWrjSTHe55fxVj/Qj0rq9z2E/+NqGXemf5s13AR0G/z3
 PqHdVLHzDe64pbOvmyU1pVQ0aMb8vMJUnqx68SQZY3On2c+MjRWQ+7aVVaKOcPGp
 uatk6QMrggHp3Li+3yZrLBE0qPr/sNMVb7mUesdZb6lFd2VIs8siwhfeGXMS+nDI
 xePzsR43Fnn5Q5KIqqvcWUb+TTTqUDUff0wyAU8NBgCaIBIZK8h2ppS1jjnbms0I
 mr8Er2vb
 =Dfum
 -----END PGP SIGNATURE-----

Merge tag 'v2021.01-rc5' into next

Prepare v2021.01-rc5

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-05 16:20:26 -05:00
Simon Glass
f31fa99a9e dtoc: Rename dt-platdata.c to dt-plat.c
Use this new name to be consistent with the rest of U-Boot, which talks
about 'plat' for the platform data, which is what this file holds.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05 12:26:35 -07:00
Simon Glass
be3bd3bb17 Makefile: Invoke dtoc only once
Update the Makefile to run dtoc only once, generating all required files.
This saves time since there is a lot of processing in each invocation of
dtoc.

We already have a variable for the object files to build, so use that
instead of repeating the same filenames. Add a C version of this also,
for the same reason.

This makes it easier to add new C files (generated by dtoc) to the build
later, as needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05 12:26:35 -07:00
Simon Glass
aa88ac884c Makefile: Use common args for dtoc
At present the dtoc commmand line is repeated twice in the Makefile. Use a
variable to avoid this, so it is easier to add more conditional arguments.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05 12:24:40 -07:00
Simon Glass
c7674fcb07 Makefile: Tidy up SPL dtb production
Use the SPL_NAME variable to simplify the rules. Drop the SPL targets
clean-files since the SPL and TPL dts/ directories are removed by
existing rules. Move the SPL rules into a new spl_dtbs to avoid the
complicated $(if) construct.

Also drop unused pieces from the 'targets' variable.

With this, SPL and TPL have separate dtbs which respect the various
u-boot,dm-spl / u-boot,dm-tpl tags.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05 12:24:40 -07:00
Simon Glass
de3e372abd Makefile: Build SPL dtbs in the spl/ directory
Rather than putting these in the top-level dts/ directory (which is
intended for U-Boot proper), put them in the correct subdirectory for
SPL (either spl/ or tpl/). This is where other SPL targets are kept,
so this is more consistent.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05 12:24:40 -07:00
Simon Glass
53db2eec7a Makefile: Build a separate .dtb for TPL
At present both SPL and TPL use the same devicetree binary. While there
is logic to run fdtgrep separately on each one, it does not actually
happen.

Add a new TPL rule and use that instead. Make this rule conditional on
there actually being a TPL. Do the same for SPL for consistency.

Note that the SPL and TPL dtbs are build by a Makefule rule used for
U-Boot proper. This is the 'dtbs' target in dts/Makefile. So the check
for CONFIG_TPL_BUILD in cmd_fdtgrep never actually works at present.

We don't support CONFIG_OF_EMBED for TPL at present.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05 12:24:40 -07:00
Tom Rini
a439136599 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-12-16 10:58:24 -05:00
Simon Glass
b7bbd553de checkpatch: Add warnings for unexpected struct names
As a way of keeping the driver declarations more consistent, add a warning
if the struct used does not end with _priv or _plat.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 16:51:09 -07:00
Holger Brunck
4cb8a10f7e remove obsolete option CONFIG_JFFS2_CMDLINE
This option is obsolete since 2009 and can be removed globally.

CC: Stefan Roese <sr@denx.de>
Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-12-02 16:21:58 -05:00
Patrick Delaunay
48aee0afb6 cmd: Kconfig: migrate CONFIG_SYS_PROMPT_HUSH_PS2
Move CONFIG_SYS_PROMPT_HUSH_PS2 in Kconfig, depending
on CONFIG_HUSH_PARSER, and remove the default value defined
in cli_hush.c under __U_BOOT__.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-12-01 14:12:28 -05:00
Michal Simek
a3c43fb01a microblaze: Remove CONFIG_SYS_FDT_SIZE
CONFIG_SYS_FDT_SIZE is not use anywhere that's why remove it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20 10:42:53 +01:00
Andre Przywara
832bfad745 libfdt: Fix signedness comparison warnings
This is a combination of upstream libfdt commits to fix warnings about
comparing signed and unsigned integers:
==========
scripts/dtc/libfdt/fdt.c: In function ‘fdt_offset_ptr’:
scripts/dtc/libfdt/fdt.c:137:18: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
   if ((absoffset < offset)
...
==========

For a detailed description of the fixes, see the dtc repo:
https://git.kernel.org/pub/scm/utils/dtc/dtc.git/log/?id=73e0f143b73d808

For this patch the commits between 73e0f143b73d8088 and ca19c3db2bf62000
have been combined and adjusted for the slight differences in U-Boot's
libfdt code base.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2020-11-10 14:31:08 -05:00
Michal Simek
35b7ca768f arch: Move NEEDS_MANUAL_RELOC symbol to Kconfig
CONFIG_NEEDS_MANUAL_RELOC macro was out of Kconfig. Move it there to be
able to use compile-time checks to reduce the number of build paths.

Fixes: f9a882438966 ("dm: core: Convert #ifdef to if() in root.c") for Microblaze
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-04 10:13:44 -05:00