Commit Graph

32213 Commits

Author SHA1 Message Date
Michal Simek
98b532b420 zynq: Make CONFIG_OF_EMBED default case
Use embedded DTB to let users use u-boot instead of u-boot-dtb.bin.
And fix SPL to use this target.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-08-19 11:27:48 +02:00
Siva Durga Prasad Paladugu
16fa00a711 zynqmp: usb: Add usb dwc3 driver support for zynqmp
Added usb dwc3 driver support for zynqmp
this also supports the DFU and LTHOR to download
the linux images on to RAM and cen be booted from
those linux images.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-08-19 11:27:30 +02:00
Masahiro Yamada
ff560a1305 ARM: zynq: drop "optional" from board select in favor of ZC702
One disadvantage of commit a26cd04920 (arch: Make board selection
choices optional) is that Kconfig could create such an insane
.config file that no board is selected.

Rip off the "optional" again in favor of ZC702 as the default
target.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-08-19 11:27:21 +02:00
Siva Durga Prasad Paladugu
84696ff57b board: Xilinx: zynqmp: Define checkboard() function
Define checkboard() function for zynqMP

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-08-19 11:26:59 +02:00
Michal Simek
be1a8c27c4 configs: zynqmp: Enable networking by default for EP108
Enable networking for EP108 by default.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-08-19 11:26:51 +02:00
Michal Simek
bb446b7a98 ARM: zynqmp_ep: Enable ethernet for EP
Enable gem0 and setup phy addr for EP.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-08-19 11:26:23 +02:00
Michal Simek
37ecd04fe3 ARM: zynqmp: Add platform specific arch_get_page_table
Based on the patch:
"armv8: caches: Added routine to set non cacheable region"
(sha1: dad17fd510)
it is necessary to add platform specific hook.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-08-19 11:25:50 +02:00
Michal Simek
cb526c1c88 zynqmp: Enable U-Boot run in EL3
Enable Secure IOU setup to enable U-Boot to run in EL3 without
setting from ATF.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-08-19 11:23:13 +02:00
Masahiro Yamada
0f9258228e of: clean up OF_CONTROL ifdef conditionals
We have flipped CONFIG_SPL_DISABLE_OF_CONTROL.  We have cleansing
devices, $(SPL_) and CONFIG_IS_ENABLED(), so we are ready to clear
away the ugly logic in include/fdtdec.h:

 #ifdef CONFIG_OF_CONTROL
 # if defined(CONFIG_SPL_BUILD) && !defined(SPL_OF_CONTROL)
 #  define OF_CONTROL 0
 # else
 #  define OF_CONTROL 1
 # endif
 #else
 # define OF_CONTROL 0
 #endif

Now CONFIG_IS_ENABLED(OF_CONTROL) is the substitute.  It refers to
CONFIG_OF_CONTROL for U-boot proper and CONFIG_SPL_OF_CONTROL for
SPL.

Also, we no longer have to cancel CONFIG_OF_CONTROL in
include/config_uncmd_spl.h and scripts/Makefile.spl.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-18 13:46:05 -04:00
Masahiro Yamada
dffb86e468 of: flip CONFIG_SPL_DISABLE_OF_CONTROL into CONFIG_SPL_OF_CONTROL
As we discussed a couple of times, negative CONFIG options make our
life difficult; CONFIG_SYS_NO_FLASH, CONFIG_SYS_DCACHE_OFF, ...
and here is another one.

Now, there are three boards enabling OF_CONTROL on SPL:
 - socfpga_arria5_defconfig
 - socfpga_cyclone5_defconfig
 - socfpga_socrates_defconfig

This commit adds CONFIG_SPL_OF_CONTROL for them and deletes
CONFIG_SPL_DISABLE_OF_CONTROL from the other boards to invert
the logic.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-18 13:46:04 -04:00
Masahiro Yamada
cc7aebe819 fdtdec: fix OF_CONTROL switch
There is no case where defined(SPL_DISABLE_OF_CONTROL) is true.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-18 13:46:04 -04:00
Masahiro Yamada
0a5804b53a dm: drop CONFIG_DM_DEVICE_REMOVE from uncmd list
We do not want to compile the DM remove code for SPL.  Currently,
we undef it in include/config_uncmd_spl.h (for C files) and in
scripts/Makefile.uncmd_spl (for Makefiles).  This is really ugly.

This commit demonstrates how we can deprecate those two files.

Use $(SPL_) for the entry in the Makfile and CONFIG_IS_ENABLED()
in C files.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-18 13:46:04 -04:00
Masahiro Yamada
e00e8b3989 led: unify obj-$(CONFIG_LED) and obj-$(CONFIG_SPL_LED) entries
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-18 13:46:03 -04:00
Masahiro Yamada
f0cd245448 led: rename CONFIG_SPL_LED_SUPPORT to CONFIG_SPL_LED
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-18 13:46:03 -04:00
Masahiro Yamada
26d5fa805d ram: unify obj-$(CONFIG_RAM) and obj-$(CONFIG_SPL_RAM) entries
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-18 13:46:02 -04:00
Masahiro Yamada
40c9abbd6b ram: rename CONFIG_SPL_RAM_SUPPORT to CONFIG_SPL_RAM
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-18 13:46:02 -04:00
Masahiro Yamada
5525958346 clk: unify obj-$(CONFIG_CLK) and obj-$(CONFIG_SPL_CLK) entries
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-18 13:46:02 -04:00
Masahiro Yamada
0543589118 clk: rename CONFIG_SPL_CLK_SUPPORT to CONFIG_SPL_CLK
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-18 13:46:01 -04:00
Masahiro Yamada
040906f68d dm: unify obj-$(CONFIG_DM) and obj-$(CONFIG_SPL_DM) entries
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-18 13:46:01 -04:00
Masahiro Yamada
d6c2ac5b75 spl: move SPL driver entries to driver/Makefile
Just preparing for upcoming cleaning.

The board-specific linker script  board/vpac270/u-boot-spl.lds
has been touched to avoid build error.  It does not change the
size of spl/u-boot-spl.bin for this board, so it should be OK.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-18 13:46:00 -04:00
Masahiro Yamada
8be60f06c2 linux/kconfig.h: add CPP macros useful for per-image config options
The previous commit introduced a useful macro used in makefiles,
in order to reference to different variables (CONFIG_... or
CONFIG_SPL_...) depending on the build context.

Per-image config option control is a PITA in C sources, too.
Here are some macros useful in C/CPP expressions.

CONFIG_IS_ENABLED(FOO) can be used as a shorthand for

  (!defined(CONFIG_SPL_BUILD) && defined(CONFIG_FOO)) || \
   (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_FOO))

For example, it is useful to describe C code as follows,

  #if CONFIG_IS_ENABLED(OF_CONTROL)
      (device tree code)
  #else
      (board file code)
  #endif

The ifdef conditional above is switched by CONFIG_OF_CONTROL during
the U-Boot proper building (CONFIG_SPL_BUILD is not defined), and by
CONFIG_SPL_OF_CONTROL during SPL building (CONFIG_SPL_BUILD is
defined).

The macro can be used in C context as well, so you can also write the
equivalent code as follows:

  if (CONFIG_IS_ENABLED(OF_CONTROL)) {
      (device tree code)
  } else {
      (board file code)
  }

Another useful macro is CONFIG_VALUE().
CONFIG_VALUE(FOO) is expanded into CONFIG_FOO if CONFIG_SPL_BUILD is
undefined, and into CONFIG_SPL_FOO if CONFIG_SPL_BUILD is defined.

You can write as follows:

  text_base = CONFIG_VALUE(TEXT_BASE);

instead of:

  #ifdef CONFIG_SPL_BUILD
      text_base = CONFIG_SPL_TEXT_BASE;
  #else
      text_base = CONFIG_TEXT_BASE;
  #endif

This commit also adds slight hacking on fixdep so that it can
output a correct list of fixed dependencies.

If the fixdep finds CONFIG_IS_ENABLED(FOO) in a source file,
we want
    $(wildcard include/config/foo.h)
in the U-boot proper building context, while we want
    $(wildcard include/config/spl/foo.h)
in the SPL build context.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-18 13:46:00 -04:00
Masahiro Yamada
04a5c40601 kbuild: add a makefile macro useful with per-image config options
Commit e02ee2548a ("kconfig: switch to single .config
configuration") made the configuration itself pretty simple,
instead, we lost the way to systematically enable/disable config
options for each image independently.

Our current strategy is, put entries into Makefile.spl for options
we need separate enabling, or once enable the options globally in
Kconfig and then undef them in Makefile.uncmd_spl if we do not want
to compile the features for SPL at all.  Things are getting really
messy.  Besides, "ifdef CONFIG_SPL_BUILD" are sprinkled everywhere
in makefiles.

This commit adds a variable to help describe makefile simpler.

$(SPL_) evaluates to "SPL_" during the SPL build, while to an empty
string during building U-boot proper.

So, you can write

  obj-$(CONFIG_$(SPL_)FOO) += foo.o

instead of

  ifdef CONFIG_SPL_BUILD
  obj-$(CONFIG_SPL_FOO) += foo.o
  else
  obj-$(CONFIG_FOO) += foo.o
  endif

If CONFIG_SPL_FOO does not exist in Kconfig, it is equivalent to

  ifndef CONFIG_SPL_BUILD
  obj-$(CONFIG_SPL_FOO) += foo.o
  endif

This is the pattern we often see in our current makefiles.

To take advantage of this macro, we should prefix SPL_ for the SPL
version of the option when we need independent control between
U-boot and SPL.  With this naming scheme, I hope our makefiles will
be much simplified.

It means we want to rename existing config options as follows
in the long run:

  CONFIG_SPL_SERIAL_SUPPORT     -> CONFIG_SPL_SERIAL
  CONFIG_SPL_I2C_SUPPORT        -> CONFIG_SPL_I2C
  CONFIG_SPL_GPIO_SUPPORT       -> CONFIG_SPL_GPIO
  CONFIG_SPL_SPI_SUPPORT        -> CONFIG_SPL_SPI
  CONFIG_SPL_DISABLE_OF_CONTROL -> CONFIG_SPL_OF_CONTROL
                                      (inverting the logic)

Then drivers/Makefile would be re-worked as follows:

  obj-$(CONFIG_$(SPL_)SERIAL)  += serial/
  obj-$(CONFIG_$(SPL_)I2C)     += i2c/
  obj-$(CONFIG_$(SPL_)GPIO)    += gpio/
  obj-$(CONFIG_$(SPL_)SPI)     += spi/
     ...

Eventually, SPL-specialized entries in Makefile.spl would go away.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-18 13:46:00 -04:00
Masahiro Yamada
29974f7737 kbuild: fixdep: optimize code slightly
If the target string matches "CONFIG_", move the pointer p
forward.  This saves several 7-chars adjustments.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-18 13:45:59 -04:00
Stephen Warren
04812605f3 fs-test.sh: minor fixes
- Re-direct stderr into the log files, so any errors U-Boot emits are
  visible in the logs. This is relevant if the "reset" shell command
  attempts to report that it's not supported on the sandbox board.
- Fix test_fs_nonfs() to name the files it created differently for each
  invocation. Otherwise, the logs from different tests overwrite
  each-other.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Suriyan Ramasami <suriyan.r@gmail.com>
2015-08-18 13:45:59 -04:00
Vladimir Zapolskiy
ea16c6a13b i2c: lpc32xx: correct sanity check for requested bus speed
LPC32xx has 3 I2C bus controllers, 2 of them are used as generic ones
and their parent clock is HCLK and CLK_HI/CLK_LO registers are 10 bit
wide. This means that if HCLK is 104MHz, then minimal configurable I2C
clock speed is about 51KHz.

Only USB OTG I2C bus controller CLK registers are 8 bit wide, thus in
assumption that peripheral clock is 13MHz it allows to set the minimal
bus speed about 25.5KHz.

Check for negative half clock value is removed since it is always false.

The change fixes the following problem for I2C busses 0 and 1:

  => i2c dev 0
  Setting bus to 0
  => i2c speed 100000
  Setting bus speed to 100000 Hz
  Failure changing bus speed (-22)

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Tested-by: Sylvain Lemieux <slemieux@tycoint.com>
2015-08-18 13:45:59 -04:00
Vladimir Zapolskiy
554b0e0d82 lpc32xx: add common USB OHCI defines for all LPC32xx boards
The change adds a number of macro definitions used by USB OHCI driver,
if CONFIG_USB_OHCI_LPC32XX is selected from a board config file.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Tested-by: Sylvain Lemieux <slemieux@tycoint.com>
2015-08-18 13:45:58 -04:00
Sylvain Lemieux
adf8d58d4f usb: lpc32xx: add host USB driver
Incorporate USB driver from legacy LPCLinux NXP BSP.
The files taken from the legacy patch are:
- lpc32xx USB driver
- lpc3250 header file USB registers definition.

The legacy driver was updated and clean-up as part of the integration with the latest u-boot.

Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
Acked-by: Marek Vasut <marex@denx.de>
Tested-by: Vladimir Zapolskiy <vz@mleia.com>
2015-08-18 13:45:57 -04:00
Sylvain Lemieux
1933af15e2 i2c: lpc32xx: add support for OTG I2C
Updated the LPC32xx I2C driver to support
the OTG I2C that is part of the USB module.

Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
Acked-by: Marek Vasut <marex@denx.de>
2015-08-18 13:45:57 -04:00
Sylvain Lemieux
30cb3bf4a9 nand: lpc32xx: add ECC layout for small page NAND
Incorporate ECC layout for small page NAND from legacy LPCLinux NXP BSP.
The code taken from the legacy patch is:
- lpc32xx SLC NAND driver (ECC layout for small page)

This layout is matching the lpc32xx NAND SLC Linux Kernel driver.

Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
2015-08-18 13:45:56 -04:00
Sylvain Lemieux
5f63bf3ec8 nand: lpc32xx: add hardware ECC support
Incorporate NAND SLC hardware ECC support from legacy LPCLinux NXP BSP.
The code taken from the legacy patch is:
- lpc32xx SLC NAND driver (hardware ECC support)
- lpc3250 header file missing SLC NAND registers definition

The legacy driver was updated and clean-up as part of the integration with the existing NAND SLC driver.

Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
Tested-by: Vladimir Zapolskiy <vz@mleia.com>
2015-08-18 13:45:56 -04:00
Vladimir Zapolskiy
327f0d23c8 lpc32xx: move common SLC NAND defines to arch/config.h
A number of LPC32xx SLC NAND defines is dictated by controller
hardware limits and OOB layout is defined by operating system, the
definitions are common for all users. Since those macro are used
in out of NAND SLC driver code (simple NAND SPL framework), they can
not be placed into the driver, therefore move them from board config
files to arch/config.h

The change also adds OOB layout details specific to small page NAND
devices taken from Linux kernel.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Tested-by: Sylvain Lemieux <slemieux@tycoint.com>
2015-08-18 13:45:55 -04:00
Sylvain Lemieux
980db8ca43 dma: lpc32xx: add DMA driver
Incorporate DMA driver from legacy LPCLinux NXP BSP.
The files taken from the legacy patch are:
- lpc32xx DMA driver
- lpc3250 header file DMA registers definition.

The legacy driver was updated and clean-up as part of the integration with the latest u-boot.

Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
Acked-by: Marek Vasut <marex@denx.de>
Tested-by: Vladimir Zapolskiy <vz@mleia.com>
2015-08-18 13:45:55 -04:00
Tom Rini
952bd79b53 Merge branch 'master' of git://git.denx.de/u-boot-spi 2015-08-18 08:25:24 -04:00
Tom Rini
783983f323 Merge branch 'master' of git://git.denx.de/u-boot-samsung 2015-08-18 08:24:32 -04:00
Tom Rini
0d339cf9a9 Prepare v2015.10-rc2
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-08-17 17:32:23 -04:00
Tom Rini
ecd37e8598 Merge git://git.denx.de/u-boot-marvell 2015-08-17 17:19:40 -04:00
Simon Glass
2212e69bc0 Revert "Align global_data to a 16-byte boundary"
This causes widespread breakage due to the operation of the low-level code
in crt0.S and cro0_64.S for ARM at least.

The fix is not complicated but it seems safer to revert this for now.

This reverts commit 2afddae075.
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-17 17:19:18 -04:00
Vignesh R
fc5e22008a ARM: dra7xx_evm: Enable EDMA3 in SPL to support DMA on qspi
Enable TI_EDMA3 and SPL_DMA support, so as to reduce boot time. With
DMA enabled there is almost 3x improvement in read performance. This
helps in reducing boot time in qspiboot mode

Also add EDMA3 base address for DRA7XX and AM57XX.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-08-17 23:29:15 +05:30
Vignesh R
8ddd9c485f spi: ti_qspi: Use DMA to read from qspi flash
ti_qspi uses memory map mode for faster read. Enabling DMA will increase
read speed by 3x @48MHz on DRA74 EVM.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-08-17 23:29:15 +05:30
Vignesh R
664ab2c992 dma: ti-edma3: Add helper function to support edma3 transfer
Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-08-17 23:29:15 +05:30
Tom Rini
146bad9619 sf: ops: Add spi_flash_copy_mmap function
When doing a memory mapped copy we may have DMA available and thus need
to have this copy abstracted so that the driver can do it, rather than a
simple memcpy.

Signed-off-by: Tom Rini <trini@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-08-17 23:29:14 +05:30
Vignesh R
5b3b0d687e ARM: AM43XX: Add functions to enable and disable EDMA3 clocks
Adds functions to enable and disable edma3 clocks which can be invoked
by drivers using edma3 to control the clocks.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-08-17 23:29:14 +05:30
Vignesh R
8a09cfe14b ARM: OMAP5: Add functions to enable and disable EDMA3 clocks
Adds functions to enable and disable edma3 clocks which can be invoked
by drivers using edma3 to control the clocks.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-08-17 23:29:14 +05:30
Kishon Vijay Abraham I
16ca1d09e6 ARM: OMAP5: Add support for disabling clocks in uboot
Add do_disable_clocks() to disable clock domains and module clocks.
These clocks are enabled using do_enable_clocks().

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-08-17 23:29:14 +05:30
Kishon Vijay Abraham I
fca45722fb ARM: AM43xx: Add support for disabling clocks in uboot
Add do_disable_clocks() to disable clock domains and module clocks.
These clocks are enabled using do_enable_clocks().

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-08-17 23:29:14 +05:30
Ravi Babu
7dd0174467 env: use cache line aligned memory for flash read
Use memalign() with ARCH_DMA_MINALIGN to allocate read buffers.
This is required because, flash drivers may use DMA for read operations
and may have to invalidate the buffer before read.

Signed-off-by: Ravi Babu <ravibabu@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
Tested-by: Jagan Teki <jteki@openedev.com>
2015-08-17 23:29:14 +05:30
Ravi Babu
156e96f038 sf: allocate cache aligned buffers to copy from flash
Use memalign() with ARCH_DMA_MINALIGN to allocate read buffers.
This is required because, flash drivers may use DMA for read operations
and may have to invalidate the buffer before read.

Signed-off-by: Ravi Babu <ravibabu@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
Tested-by: Jagan Teki <jteki@openedev.com>
2015-08-17 23:29:14 +05:30
vishalm@ti.com
a39cfe717c ti: qspi: set flash quad bit based on quad support flag
Update op_mode_rx flag based on CONFIG_QSPI_QUAD_SUPPORT flag,
instead of platform.

Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-08-17 23:29:14 +05:30
Stefan Roese
ce2cb1d3ed arm: mvebu: db-88f6820-gp: Enable PCI support
This patch enabled the MVEBU PCIe support on the db-88f6820-gp A38x
eval board. It also enabled the Intel E1000 driver support and
adds the initialization of PCIe network controllers to the
board code.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Anton Schubert <anton.schubert@gmx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Dirk Eibach <eibach@gdsys.de>
2015-08-17 18:49:52 +02:00
Stefan Roese
41e705ac79 arm: mvebu: db-mv784mp-gp: Enable PCI support
This patch enabled the MVEBU PCIe support on the db-mv784mp-gp AXP
eval board. It also enabled the Intel E1000 driver support and
adds the initialization of PCIe network controllers to the
board code.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Anton Schubert <anton.schubert@gmx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-08-17 18:49:47 +02:00