Commit Graph

2124 Commits

Author SHA1 Message Date
Wolfgang Denk
17dd883c5b Merge branch 'master' of git://git.denx.de/u-boot-samsung 2010-10-29 21:47:48 +02:00
Wolfgang Denk
2e5167ccad Replace CONFIG_RELOC_FIXUP_WORKS by CONFIG_NEEDS_MANUAL_RELOC
By now, the majority of architectures have working relocation
support, so the few remaining architectures have become exceptions.
To make this more obvious, we make working relocation now the default
case, and flag the remaining cases with CONFIG_NEEDS_MANUAL_RELOC.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>
Tested-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2010-10-29 21:32:07 +02:00
C Nauman
d9abba8254 Add generic support for samsung s3c2440
This patch adds generic support for the Samsung s3c2440 processor.

Global s3c24x0 changes to struct members converting from upper case to
lower case.

Signed-off-by: Craig Nauman <cnauman@diagraph.com>
Cc: kevin.morfitt@fearnside-systems.co.uk
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2010-10-28 15:35:56 +09:00
Wolfgang Denk
071bc92330 Coding Style cleanup
Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-10-27 22:48:30 +02:00
Lei Wen
0158126e25 mmc: seperate block number into small parts for multi-write cmd
Constraint the mmc framework to only send no more than 65535
blocks in one go during the multi-write command. This constraint
comes due to the limitation of 16bit width block counter register
at some hardware.

Signed-off-by: Lei Wen <leiwen@marvell.com>
Cc: Reinhard Meyer <u-boot@emk-elektronik.de>
2010-10-27 20:39:33 +02:00
Wolfgang Denk
90d8cff099 Merge branch 'master' of git://git.denx.de/u-boot-i2c 2010-10-26 20:55:39 +02:00
Steve Sakoman
4df6689495 ARMV7: OMAP: I2C driver: Fix bug found in 37XX testing
On OMAP36/37XX the standard on chip pullups are not sufficient to
ensure proper i2c operation without external pullups or switching
to high speed mode and enabling special on chip pullups.

This is an issue for Beagle xM, which does not have external pullups
on the expansion board i2c lines.

The issue manifests itself as an AL (arbitration lost) error when
probing for a non-existent device (i.e. on a Beagle xM with no expansion
boards attached).  This issue does not occur on expansion boards that
include pullups or on Overo 37XX COM's since they include pull-ups.

This patch fixes the issue by checking for the AL bit in the i2c_probe
function.

Signed-off-by: Steve Sakoman <steve.sakoman@linaro.org>
2010-10-25 07:57:20 +02:00
Wolfgang Denk
f2b382ea06 Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx 2010-10-23 21:59:42 +02:00
Wolfgang Denk
33a08c10c7 Merge branch 'master' of git://git.denx.de/u-boot-video 2010-10-23 21:56:51 +02:00
Wolfgang Denk
b4039a5415 Merge branch 'master' of git://git.denx.de/u-boot-usb 2010-10-23 21:49:28 +02:00
Ilya Yanok
ec50a8e389 cfi_flash: handle 'chip size exceeds address window' situation
On some boards we have flash mapped high in the address space with
considerably small window (say 0xFE000000 and 32MB). When we install
bigger chip (say 64MB) on such a board strange things happen
(flash_write() doesn't work at all, for ex). That's because cfi_flash
driver doesn't care about window size at all.
Of course, cleanest solution would probably be to just extend address
window to be able to map the whole flash but for legacy/compatibility
reasons some people prefer just truncate the flash size and never use
the upper part.
This patch adds an option for cfi_flash driver to handle this situation
properly. To achieve this we add the new function cfi_flash_bank_size()
which can be provided by the board code and weak-aliased to default
implementation that returns value from the CONFIG_SYS_FLASH_BANKS_SIZES
array if it's defined or 0 otherwise (the last case is added for
compatibility).
If non-zero flash bank size is provided and detected chip size is bigger
than provided address window size the warning will be displayed and
flash chip will be truncated.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>

Changed cfi_flash_bank_size() return type to unsigned long
to match caller function.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-10-23 21:04:49 +02:00
Wolfgang Denk
09c83a45b7 ehci-hcd.c: fix hanging under higher load
This patch solves a problem with USB hanging under higher load on a
i.MX31 board.  It falls into class of typical USB problems and fixes:
if you don't understand the real cause, add a delay somewhere.

The problem appeared after introduction of ELF relocation, which
results in smaller code, which appears to run faster (probably because
it fits better in the cache); turning off the instruction cache,
adding debug printf()s and increasing the delay have all been found to
make the problem go away.

Moving the original "udelay(1)" up in the code to it's new place made
the problem appear much less frequently. Increasing the delay to 2
microseconds then made the code run reliably in all (hour-long) tests.
To be on the safe side, we set it to 5 microseconds here.

Signed-off-by: Heiko schocher <hs@denx.de>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Remy Bohmer <linux@bohmer.net>
Cc: Stefano Babic <sbabic@denx.de>
2010-10-22 21:44:37 +02:00
Mike Frysinger
0228348e9c usb: musb: constify a bit
These ep and root hub structures need not be writable.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 21:41:46 +02:00
Wolfgang Denk
8b675fe18e USB: fix Queue Element Transfer Descriptor changes
Commit 3ed1607 "USB: sync Queue Element Transfer Descriptor against
EHCI spec" added an "__attribute__ ((aligned (32)))" to the
declaration of struct qTD, as used for example in the Linux kernel as
well.

However, it turns out that this attribute causes errors in "usb start"
(like "ERROR: NOT USB_CONFIG_DESC 7b" and similar). Drop the attribute
again.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Dan Lykowski <lykowdk@gmail.com>
Cc: Remy Bohmer <linux@bohmer.net>
Cc: Stefano Babic <sbabic@denx.de>
2010-10-22 21:41:45 +02:00
Florian Fainelli
af68c06670 ehci-pci: print hccr, hcor and hc_lenght
It is useful to know the EHCI-PCI hccr, hcor and hc_lenght to make sure it was
successfully registered, and at the correct location.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2010-10-22 21:41:45 +02:00
John Schmoller
96d6160324 pci: Add ability to re-enumerate PCI buses
Add a new 'pci enum' command which re-enumerates the PCI buses.  This
command is enabled via the CONFIG_CMD_PCI_ENUM define and can be useful
in boards with FPGAs connected via PCI/PCIe, boards that support PCI
hot-plugging, or during PCI debug.

Also enable the 'pci enum' command for X-ES's Freescale-based boards.

Signed-off-by: John Schmoller <jschmoller@xes-inc.com>
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Wolfgang Denk <wd@denx.de>
2010-10-22 02:17:12 -05:00
Stefano Babic
5dda7945d1 MX51: Add video support
Add framebuffer driver for the MX51 processor
working on the IPUv3 internal graphic processor.
The port is based on the driver found in the kernel
delivered by Freescale as part of i.MX BSP:

[kernel 2.6.31 commit cc4fe714041805997b601fe8e5dd585d8a99297f]

[agust@denx.de: some style fixes and dead code removal]
Signed-off-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-10-22 00:05:05 +02:00
Stefano Babic
575001e40c MX51: Add IPU driver for video support
The patch is a porting of the IPU Linux driver
developed by Freescale to have framebuffer
functionalities in u-boot. The port is based on
kernel 2.6.31 commit cc4fe714041805997b601fe8e5dd585d8a99297f,
as delivered by Freescale [i.MX BSP].
Most features are dropped from the original driver and
only LCD support is the goal of this porting.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-10-22 00:05:05 +02:00
Macpaul Lin
0284816e98 ftrtc010.c : enhance code according to original datasheet
Add missing codes according to original datasheet.
This patch also makes ftrtc010 could be adapted to PCLK and EXT_CLK.

Signed-off-by: Macpaul Lin <macpaul@andestech.com>
2010-10-20 21:46:30 +02:00
Wolfgang Denk
b76335178e Merge branch 'master' of git://git.denx.de/u-boot-i2c 2010-10-20 21:23:22 +02:00
Steve Sakoman
fbad355562 ARMV7: OMAP: I2C driver: Restructure i2c_probe function
This patch removes the "magic number" delays and instead
monitors state changes in the status register bits.

Signed-off-by: Steve Sakoman <steve.sakoman@linaro.org>
Tested-by: Heiko Schocher <hs@denx.de>
2010-10-20 15:28:48 +02:00
Steve Sakoman
d480c46773 ARMV7: OMAP: I2C driver: Restructure i2c_write_byte function
This patch removes the "magic number" delays and instead
monitors state changes in the status register bits.

Signed-off-by: Steve Sakoman <steve.sakoman@linaro.org>
Tested-by: Heiko Schocher <hs@denx.de>
2010-10-20 15:28:41 +02:00
Steve Sakoman
da0cc665bc ARMV7: OMAP: I2C driver: Restructure i2c_read_byte function
This patch removes the "magic number" delays and instead
monitors state changes in the status register bits.

Signed-off-by: Steve Sakoman <steve.sakomanlinaro.org>
Tested-by: Heiko Schocher <hs@denx.de>
2010-10-20 15:28:37 +02:00
Steve Sakoman
73e8747fe4 ARMV7: OMAP: I2C driver: Use same timeout value as linux kernel driver
This patch matches the poll interval (1 millisecond) and timeout (1 second)
used in the linux driver. It also adds a return value of 0 in the event of
a timeout error and cleans up some formatting errors in that section of the
code.

Signed-off-by: Steve Sakoman <steve.sakoman@linaro.org>
Tested-by: Heiko Schocher <hs@denx.de>
2010-10-20 15:28:33 +02:00
Kumar Gala
0ef911934f Fix compile warning in uli526x driver
uli526x.c: In function 'uli526x_init_one':
uli526x.c:314:2: warning: dereferencing type-punned pointer will break strict-aliasing rules
uli526x.c:314:2: warning: dereferencing type-punned pointer will break strict-aliasing rules

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-20 02:38:41 -05:00
Kumar Gala
f8c42495e0 powerpc/fsl: Introduce common enum for PHY types
Have a common enum for phy types that we use in the UCC driver.  We will
also use this enum for dealing with phy connection fixup in the device
tree.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-20 02:27:18 -05:00
Wolfgang Denk
3ed16071b0 USB: sync Queue Element Transfer Descriptor against EHCI spec
Appendix B "EHCI 64-Bit Data Structures" of the "Enhanced Host
Controller Interface Specification for Universal Serial Bus" (Rev.
1.0, March 12, 2002) defines additional fields which were missing in
U-Boot's struct qTD; as these are also present in recent versions of
struct ehci_qtd in the Linux kernel, we add them here, too.

This fixes some nasty memory corruption problems.

Reported-by: Dan Lykowski <lykowdk@gmail.com>
See http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/76942

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Remy Bohmer <linux@bohmer.net>
Cc: Dan Lykowski <lykowdk@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Tested-by: Stefano Babic <sbabic@denx.de>
2010-10-20 00:23:57 +02:00
Wolfgang Denk
b18815752f Merge branch 'master' of git://git.denx.de/u-boot-arm 2010-10-20 00:10:07 +02:00
John Rigby
e9319f111d drivers/net/fec_mxc.c: write mac address in init
Call fec_set_hwaddr in init routine to setup MAC address so when ethaddr is set
late via setenv the change will propagate to the hw.

Signed-off-by: John Rigby <john.rigby@linaro.org>
CC: Ben Warren <biggerbadderben@gmail.com>
2010-10-19 23:27:19 +02:00
Marek Vasut
3ba8bf7c6d PXA: pxa-regs.h cleanup
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-10-19 22:46:22 +02:00
Wolfgang Denk
083d506937 Merge branch 'master' of git://git.denx.de/u-boot-imx
Conflicts:
	board/logicpd/imx31_litekit/config.mk
	boards.cfg

Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-10-19 20:58:16 +02:00
Minkyu Kang
1628cfc4fe ARMV7: S5P: serial: support the s5pc210
This patch is for s5pc210 support.
Due to the resigter of baudrate is changed from slot to value,
add both of them to uart structure.

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2010-10-19 11:35:29 +09:00
Jaehoon Chung
1727e21698 s5p_mmc: support 8-bit bus width
This Patch do support 8-bit bus width for s5p
So we add parameter for bus_width (in s5p_mmc_init(), s5p_mmc_initialize())
If want to use 8-bit bus width, only change (0, 8) instead of (0, 4).

 Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
 Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2010-10-19 11:34:54 +09:00
Damien Dusha
29c6fbe047 MPC5121: Add USB EHCI support
Signed-off-by: Francesco Rendine <francesco.rendine@valueteam.com>
Signed-off-by: Damien Dusha <d.dusha@gmail.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>

Coding style cleanup; slight file restructuring.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Remy Bohmer <linux@bohmer.net>
2010-10-18 22:33:32 +02:00
Wolfgang Denk
439f6f7ec1 FPGA: fix support for non-Lattice devices
Commit 3b8ac464 "FPGA: add support for downloading Lattice bitstream"
added support for Lattice devices, but failed to add #ifdef's that are
needed when building for non-Lattice devices, which results in build
failures like these:

Configuring for GEN860T board...
drivers/fpga/libfpga.a(fpga.o): In function `fpga_dev_info':
/home/wd/git/u-boot/work/drivers/fpga/fpga.c:145: undefined reference to `lattice_info'
drivers/fpga/libfpga.a(fpga.o): In function `fpga_dump':
/home/wd/git/u-boot/work/drivers/fpga/fpga.c:269: undefined reference to `lattice_dump'
drivers/fpga/libfpga.a(fpga.o): In function `fpga_load':
/home/wd/git/u-boot/work/drivers/fpga/fpga.c:233: undefined reference to `lattice_load'
make: *** [u-boot] Error 1

Add the missing code.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2010-10-18 21:32:14 +02:00
Stefano Babic
a2f9bff998 MX31: add delay between USB port setup and reset
Sometimes a usb tree is not popolated after a system reset.
It seems a delay is required after setting the USB ports
for the MX.31 before resetting the ehci controller.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-10-18 15:21:36 +02:00
Wolfgang Denk
cacc342d5a Merge branch 'master' of git://git.denx.de/u-boot-arm 2010-10-17 20:25:05 +02:00
Ben Gardiner
10d6ac94e0 davinci_nand, trivial : use symbolic ECC start command
The ECC calculations were started by writing 1 << 13 to the nand FCR register;
that value is also defined as DAVINCI_NANDFCR_4BIT_CALC_START in emif_defs.h.

This patch substitutes the macro DAVINCI_NANDFCR_4BIT_CALC_START for the
magic number '1 << 13'.

Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-10-17 20:14:43 +02:00
Sukumar Ghorai
de941241a0 ARMV7: OMAP: Add new mmc driver compatible with CONFIG_GENERIC_MMC
OMAP boards currently use a legacy mmc driver. This patch adds a new
mmc driver which will work with the generic mmc driver in u-boot.

This new driver will work with both OMAP3 and OMAP4 boards.

This patch does not remove the old driver.  It should remain in the
tree until all boards that use it switch to the new driver.

Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com>
Tested-by: Steve Sakoman <steve@sakoman.com>
2010-10-17 20:14:10 +02:00
Sukumar Ghorai
d23e2c09a7 MMC: Fix for capacity calculation on eMMC
The current mmc driver returns erroneous capacity information for
  eMMC.  The capacity of eMMC devices is available only in the ext-CSD
  register.  This patch add code to read the ext-CDSD register and
  correctly calculate eMMC capacity.

Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com>
Acked-by: Steve Sakoman <steve@sakoman.com>
2010-10-17 20:14:06 +02:00
Wolfgang Denk
6ca803750e Merge branch 'master' of git://git.denx.de/u-boot-imx 2010-10-17 19:57:38 +02:00
Stefan Roese
1a2d9b30e3 ns16550: Add WATCHDOG_RESET to putc for short watchdog timeout boards
Call watchdog_reset() upon newline. This is done here in putc
since the environment code uses a single puts() to print the complete
envrironment upon "printenv". So we can't put this watchdog call
in puts().

This is needed for boards with a very short watchdog timeout, like the
lwmon5 with a 100ms timeout. Without this patch this board resets in the
commands with long outputs, like "printenv" or "fdt print".

Note that the image size is not increased with this patch when
CONFIG_HW_WATCHDOG or CONFIG_WATCHDOG are not defined since the compiler
optimizes this additional code away.

Signed-off-by: Stefan Roese <sr@denx.de>

Fix typo in comment.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-10-13 21:59:31 +02:00
Wolfgang Denk
e1b4c57096 Merge branch 'master' of git://git.denx.de/u-boot-arm 2010-10-13 20:59:47 +02:00
Wolfgang Denk
da61f6c45a Merge branch 'sf' of git://git.denx.de/u-boot-blackfin 2010-10-13 20:58:51 +02:00
Stefano Babic
5b591502f9 MX31: Add support for MXC EHCI controller
The patch adds the EHCI controller for the i.MX31 Soc.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-10-13 18:11:44 +02:00
Stefano Babic
f76888c294 MX31: add support for setting pin pads
The patch adds a utility function and defines
to set the pad as it is done in linux.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-10-13 18:11:30 +02:00
Stefano Babic
3b8ac464f2 FPGA: add support for downloading Lattice bitstream
The patch adds support to load a Lattice's bitstream
image (called VME file) into a Lattice FPGA. The code
containing the state machine delivered as part of
Lattice's ispVMtools is integrated.

The FPGA is programmed using the JTAG interface. The
board maintainer must provide accessors to drive the
JTAG signals TCK, TMS, TDI and to get the value of the
input signal TDO.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-10-13 18:09:31 +02:00
Bryan Wu
4ee691f6ac usb: musb: only write CLRDATATOG when appropriate
This is a change similar to what is already in the Linux driver.  We
should only program the CLRDATATOG bit when the current mode indicates
that it is needed.

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-13 12:08:43 +02:00
Vitaly Kuzmichev
98fae9707f USB-CDC: Prevent rx_req being enqueued twice
After gadget reinitializaton (after tftp has been done once)
packet_received may become equal to 1 due to nuking OUT_EP
while disabling it in eth_reset_config.

rx_submit called from usb_eth_init queues rx_req first time.
But the first call of usb_eth_recv from NetLoop queues rx_req
again due to packet_received = 1.

The following flow shows the path of functions calls when
this happens:

 net/net.c:NetLoop
 |
 +-net/eth.c:eth_init
 |   ether.c:usb_eth_init
 |   |
 |   +-udc_driver:usb_gadget_handle_interrupts
 |   |   udc_driver:...
 |   |     ether.c:eth_setup
 |   |       ether.c:eth_set_config
 |   |         ether.c:eth_reset_config
 |   |           udc_driver:usb_ep_disable
 |   |             udc_driver:nuke
 |   |               ether.c:rx_complete
 |   |                 ether.c: packet_received = 1;
 |   |
 |   +-ether.c:rx_submit
 |       udc_driver:usb_ep_queue --- The first time when rx_req is queued
 |
 +-net/eth.c:eth_rx
     ether.c:usb_eth_recv
     |
     +-udc_driver:usb_gadget_handle_interrupts
     |   udc_driver:... --- no interrupts, returning
     +-ether.c: if (packet_received) { ...
         ether.c:rx_submit
           udc_driver:usb_ep_queue --- The second time!

Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
2010-10-13 12:07:58 +02:00
Vitaly Kuzmichev
ac5d32d15c USB-CDC: Fix tx/rx_req memory leaks
Remove and fix needless and destructive operations with tx/rx_req.

1) 'req' in rx_complete is always not NULL and always equals to rx_req
2) Free allocated tx_req if rx_req allocation has failed
3) Do not zero out tx/rx_req in usb_eth_init, leave this for
eth_reset_config which will be called at the next use of usb0
4) Additional check in usb_eth_recv is not required

Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
2010-10-13 12:07:58 +02:00