Commit Graph

8895 Commits

Author SHA1 Message Date
Detlev Zundel
95c44ec485 tqm5200: Correct comment and code in post_hotkeys_pressed.
This fixes the code and the comment according to the original intent of
doing an intensive memory test when PSC6_3 is pulled low on the STK52xx.
Notably PORT_CONFIG will be overridden with this correct code now,
so beware.

The original code only worked by coincidence depending on the PORT_CONFIG
setting from the header file.  The new code was tested to ensure that the
(undocumented) memory test still works on the STK52x.

Signed-off-by: Detlev Zundel <dzu@denx.de>
CC: Martin Krause <Martin.Krause@tqs.de>

Minor white-space cleanup.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-10-08 00:31:23 +02:00
Wolfgang Denk
da01f53404 mpc512x: fix fixed_sdram() init code.
Commit 054197ba and later fixes used an array to initialize some of
the MDDRC parameters; however, the use of an array turned out to be a
bad idea as it was not possible to correlate structure entries to
array indices in readable and reliable way. Now we use a struct
instead, which makes this self-explanatory.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-10-08 00:23:12 +02:00
Niklaus Giger
dbcc357166 ppc4xx: respect 80-chars per line in ppc*.h files
After running checkstyle.pl on the three previous patches I noted that in
the *.h files there were a lot of long lines. This patch solves this problem.

Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-10-07 09:15:30 +02:00
Niklaus Giger
78d2a64137 ppc4xx: Rework cmd reginfo
The command "reginfo" got an overhaul for the ppc4xx. It dumps all the
relevant HW configuration registers (address, symbolic name, content).
This allows to easily detect errors in *.h files and changes in the HW
configuration.

Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-10-07 09:15:26 +02:00
Niklaus Giger
ddc922ff2c ppc_4xx: Apply new HW register names
Modify all existing *.c files to use the new register names
as seen in the AMCC manuals.

Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-10-07 09:15:20 +02:00
Niklaus Giger
f80e61dcfe ppc4xx: Cleanup some HW register names
Here you find all the changes in the include directory for new register names
and adapting other ones to the names used by AMCC in their manuals, e.g.
For 440EPx/GRPPC440EPx/GRX, Revision 1.15 – September 22, 2008
For PPC405GP Embedded Processor, Revision 1.02 – March 22, 2006

Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-10-07 09:15:13 +02:00
Stefan Roese
56f14818f6 ppc4xx: Add PPC405EX(r) Rev D support
Unfortunately some Rev D PPC405EX/405EXr PVR's are identical with older
405EX(r) parts. Here a list:

0x12911475 - 405EX Rev D with Security *and* 405EX Rev A/B witout Sec
0x12911473 - 405EX Rev D without Security *and* 405EXr Rev A/B with Sec

Since there are only a few older parts in the field, this patch now
changes the PVR's above to represent the new Rev D versions.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Phong Vo" <pvo@amcc.com>
2009-10-07 09:14:27 +02:00
Stefan Roese
06dfaeef52 ppc4xx: Fix msg "initialization as root-complex failed" upon PCIe scan
This message is printed upon PCIe bus scan, not only upon error, but also
if no PCIe device is detected at all. Since this is not an error, let's
remove this message in this case. We already have the message
"link is not up." if there is no PCIe device present.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Wolfgang Denk <wd@denx.de>
2009-10-07 09:13:46 +02:00
Mike Nuss
54f5f056aa PPC4xx: Denali core: Fix incorrect DDR row bits
The SPD detection code for the Denali memory controller used on some
ppc4xx
processors incorrectly encodes DDR0_42. With certain memory
configurations,
this can cause the bootwrapper to incorrectly calculate the installed
memory
size, because the number of row bits is wrong. This patch fixes that
encoding.

Signed-off-by: Mike Nuss <mike@terascala.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-10-07 09:10:11 +02:00
Ben Warren
99dbd4efd6 Add information about return values of xxx_eth_register() in documentation
As discussed on mailing list, <0 indicates failure, >=0 indicates number
of interfaces found.

Also added blurb about private data

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-10-05 00:02:51 -07:00
Mike Frysinger
1f1e774ec6 document network driver framework
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-10-04 23:03:06 -07:00
Prafulla Wadaskar
aba8237257 net: kirkwood_egiga.c: fixed build warning
if link up detection code is disabled through config option, it gives build warning.
This patch fixes the same

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-10-04 22:55:02 -07:00
Ben Warren
7194ab8095 Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
All in-tree boards that use this controller have CONFIG_NET_MULTI
added
Also:
  - changed CONFIG_DRIVER_SMC91111 to CONFIG_SMC91111
  - cleaned up line lengths
  - modified all boards that override weak function in this driver
  - modified all eeprom standalone apps to work with new driver
  - updated blackfin standalone EEPROM app after testing

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-04 22:37:03 -07:00
Prafulla Wadaskar
32e7f239dd net: phy: mv88e61xx.c : fixed build warning
following build warning was observed

mv88e61xx.c: In function ‘mv88e61xx_busychk’:
mv88e61xx.c:208: warning: dereferencing type-punned pointer will break strict-aliasing rules

This patch fixes the same
Patch tested for rd6281a board build

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-10-04 22:30:46 -07:00
James Clough
c0b46d8ead net: Fix problem with 405EZ ethernet interrupt
On 405EZ the RX-/TX-interrupts are coalesced into one IRQ bit in the
UIC. We need to acknowledge the RX-/TX-interrupts in the
SDR0_ICINTSTAT reg as well.

This problem was introduced with commit
d1631fe1 [ppc4xx: Consolidate PPC4xx UIC defines]

Signed-off-by: James Clough <james@rtetc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-10-04 22:25:20 -07:00
Mike Frysinger
91b469c95f net: add random_port() prototype
The random_port() is meant to be used by other net code, but without a
prototype, we get fun warnings like:
dns.c: In function 'DnsSend':
dns.c:89: warning: implicit declaration of function 'random_port'

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-10-04 22:25:20 -07:00
Wolfgang Denk
311c19ccb5 Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx 2009-10-03 23:40:35 +02:00
Wolfgang Denk
eb4bf4c077 Merge branch 'master' of git://git.denx.de/u-boot-blackfin 2009-10-03 23:38:55 +02:00
Matthias Fuchs
3b4bd2d75c ppc4xx: Add SDRAM detection for PMC440 boards
This patch adds support to detect the amount of DDR2 SDRAM
on PMC440 modules. Detection is done by probing through
a list of available and supported hardware configurations
from 1GByte down to 256MB.

The static TLB entry is replaced by dynamically created entries.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-10-02 13:56:07 +02:00
Stefan Roese
fb95169e39 ppc4xx: Merge PPC4xx DDR and DDR2 ECC handling
This patch merges the ECC handling (ECC parity byte writing) into one
file (ecc.c) for all PPC4xx SDRAM controllers except for PPC440EPx/GRx.
This exception is because only those PPC's use the completely different
Denali SDRAM controller core.

Previously we had two routines to generate/write the ECC parity bytes.
With this patch we now only have one core function left.

Tested on Kilauea (no ECC) and Katmai (with and without ECC).

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Felix Radensky <felix@embedded-sol.com>
Cc: Grant Erickson <gerickson@nuovations.com>
Cc: Pieter Voorthuijsen <pv@prodrive.nl>
2009-10-02 13:53:37 +02:00
Felix Radensky
d24bd2517a ppc4xx: Reorganize DDR2 ECC handling
Reorganize DDR2 ECC handling to use common code for
SPD DIMMs and soldered SDRAM. Also, use common code
to display SDRAM info (ECC, CAS latency) for SPD and
soldered SDRAM variants.

Signed-off-by: Felix Radensky <felix@embedded-sol.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-10-02 13:53:28 +02:00
Wolfgang Denk
1d96cfe8f5 Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx 2009-09-30 23:39:36 +02:00
Wolfgang Denk
7529b4445b Merge branch 'master' of git://git.denx.de/u-boot-nand-flash 2009-09-30 23:34:36 +02:00
Wolfgang Denk
9e2032aa56 Merge branch 'master' of git://git.denx.de/u-boot-ubi 2009-09-30 23:28:18 +02:00
Wolfgang Denk
9ae7ae6b4d Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx 2009-09-30 23:26:59 +02:00
Wolfgang Denk
7b5ae460c3 Merge branch 'master' of git://git.denx.de/u-boot-i2c 2009-09-30 23:24:10 +02:00
Wolfgang Denk
37d416324b Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx 2009-09-30 23:22:46 +02:00
Wolfgang Denk
d3909d74cc Merge branch 'master' of git://git.denx.de/u-boot-fdt 2009-09-30 23:16:49 +02:00
Mike Frysinger
46a887949e Blackfin: update default console= settings
The Linux kernel has changed the way it numbers serial ports, so update
the default command line to match it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-30 15:15:08 -04:00
Mike Frysinger
4c5f307d58 Blackfin: bf533-ezkit: update env location
The u-boot image has outgrown the current space and overflowed into the
env sector.  So move the env to the next available sector (we've already
allocated the first few sectors anyways for u-boot).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-30 15:15:06 -04:00
Kumar Gala
24b17d8a3c ppc/85xx: get_law_entry isn't used in CONFIG_NAND_SPL
Don't include get_law_entry as part of the NAND_SPL build since the
code isnt used.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-30 08:42:12 -05:00
Mingkai Hu
693a048d8a Add README.mpc8536ds
Add boot from NAND/eSDHC/eSPI description

Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-30 08:42:12 -05:00
Mingkai Hu
e40ac4870c On-chip ROM boot: MPC8536DS support
The MPC8536E is capable of booting from the on-chip ROM - boot from
eSDHC and boot from eSPI. When power on, the porcessor excutes the
ROM code to initialize the eSPI/eSDHC controller, and loads the mian
U-Boot image from the memory device that interfaced to the controller,
such as the SDCard or SPI EEPROM, to the target memory, e.g. SDRAM or
L2SRAM, then boot from it.

The memory device should contain a specific data structure with control
word and config word at the fixed address. The config word direct the
process how to config the memory device, and the control word direct
the processor where to find the image on the memory device, or where
copy the main image to. The user can use any method to store the data
structure to the memory device, only if store it on the assigned address.

The on-chip ROM code will map the whole 4GB address space by setting
entry0 in the TLB1, so the main image need to switch to Address space 1
to disable this mapping and map the address space again.

This patch implements loading the mian U-Boot image into L2SRAM, so
the image can configure the system memory by using SPD EEPROM.

Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-30 08:42:11 -05:00
Mingkai Hu
9a1a0aedbb NAND boot: MPC8536DS support
MPC8536E can support booting from NAND flash which uses the
image u-boot-nand.bin. This image contains two parts: a 4K
NAND loader and a main U-Boot image. The former is appended
to the latter to produce u-boot-nand.bin. The 4K NAND loader
includes the corresponding nand_spl directory, along with the
code twisted by CONFIG_NAND_SPL. The main U-Boot image just
like a general U-Boot image except the parts that included by
CONFIG_SYS_RAMBOOT.

When power on, eLBC will automatically load from bank 0 the
4K NAND loader into the FCM buffer RAM where CPU can execute
the boot code directly. In the first stage, the NAND loader
copies itself to RAM or L2SRAM to free up the FCM buffer RAM,
then loads the main image from NAND flash to RAM or L2SRAM
and boot from it.

This patch implements the NAND loader to load the main image
into L2SRAM, so the main image can configure the RAM by using
SPD EEPROM. In the first stage, the NAND loader copies itself
to the second to last 4K address space, and uses the last 4K
address space as the initial RAM for stack.

Obviously, the size of L2SRAM shouldn't be less than the size
of the image used. If so, the workaround is to generate another
image that includes the code to configure the RAM by SPD and
load it to L2SRAM first, then relocate the main image to RAM
to boot up.

Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-30 08:42:06 -05:00
Mingkai Hu
0735570052 mpc8536: fix board config file line length
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-30 08:29:51 -05:00
Paul Gortmaker
dd9ca98f26 sbc8548: reclaim wasted sector in boot flash
By nature of being based off the MPC8548CDS board, this
board inherited an ENV_SIZE setting of 256k.  But since
it has a smaller flash device (8MB soldered on), it has
a native sector size of 128k, and hence the ENV_SIZE was
causing 2 sectors to be used for the environment.

By removing the unused sector, we can push TEXT_BASE up
closer to the end of address space and reclaim that
sector for any other application.  This also fixes the
mismatch between TEXT_BASE and MONITOR_LEN reported by
Kumar earlier.

Since this board also supports the ability to boot off
the 64MB SODIMM flash, this change is forward looking
with that in mind; i.e. the settings for MONITOR_LEN
and ENV_SIZE will work when the 512k sectors of the
SODIMM flash are used for alternate boot in the future.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-30 08:29:47 -05:00
Kumar Gala
8280912e06 ppc/85xx: Clean up immap_85xx.h
* Converted all white space to tabs
* Converted all types to u8/u16/u32
* Reduce lines to fit in 80 columns
* Renamed MPC85xx_{Q,B}MAN -> FSL_CORENET_{Q,B}MAN

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-28 22:35:58 -05:00
Scott Wood
d44e9c1736 NAND: davinci: Fix warnings when 4-bit ECC not used
I accidentally left v2 of "NAND: DaVinci:Adding 4 BIT ECC support"
applied when I pushed the tree last merge window, and missed these fixes
which were in v3 of that patch.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-09-28 16:33:18 -05:00
Kyungmin Park
ca6189db48 Refactor OneNAND IPL code
Refactoring the OneNAND IPL code

and some minor fixed:
- Remove unnecessary header file
- Fix wrong access at read interrupt
- The recent OneNAND has 4KiB pagesize

Also Board can override OneNAND IPL image

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2009-09-28 14:17:56 -05:00
Shinya Kuribayashi
a05e3f9a08 MIPS: VCT: Remove read_spareram reference
The commit ecad289fc6 (OneNAND: Remove
unused read_spareram and add unlock_all as kernel does) forgot to remove
a local reference to read_spareram in board/micronas/vct/ebi_onenand.c,
which causes the following build failure when configured with OneNAND:

ebi_onenand.c: In function 'onenand_board_init':
ebi_onenand.c:196: error: 'struct onenand_chip' has no member named 'read_spareram'
make[1]: *** [ebi_onenand.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [board/micronas/vct/libvct.a] Error 2

Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
Acked-by: Stefan Roese <sr@denx.de>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-09-28 13:55:06 -05:00
Simon Kagstrom
ef37c6835e ubifs: Correct dereferencing of files-after-symlinks
Files in directories which are symlinked to were not dereferenced
correctly in last commit. E.g., with a symlink

   /boot/lnk -> /boot/real_dir

loading

   /boot/lnk/uImage

will fail. This patch fixes that by simply seeing to it that the target
base directory has a slash after it.

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-09-28 16:58:31 +02:00
Stefan Roese
b306db2f1b ppc4xx: Remove mtsdram0() marcos and use common mtsdram() instead
Additionally some whitespace coding style fixes.

Signed-off-by: Stefan Roese <sr@denx.de>
2009-09-28 10:46:05 +02:00
Stefan Roese
95b602bab5 ppc4xx: Convert PPC4xx SDRAM defines from lower case to upper case
The latest PPC4xx register cleanup patch missed some SDRAM defines.
This patch now changes lower case UIC defines to upper case. Also
some names are changed to match the naming in the IBM/AMCC users
manuals (e.g. mem_mcopt1 -> SDRAM0_CFG).

Signed-off-by: Stefan Roese <sr@denx.de>
2009-09-28 10:45:54 +02:00
Stefan Roese
952e7760bf ppc4xx: Convert PPC4xx UIC defines from lower case to upper case
The latest PPC4xx register cleanup patch missed the UIC defines.
This patch now changes lower case UIC defines to upper case.

Signed-off-by: Stefan Roese <sr@denx.de>
2009-09-28 10:45:42 +02:00
Joakim Tjernlund
d1c9e5b379 fsl_i2c: Do not generate STOP after read.
__i2c_read always ends with a STOP condition thereby releasing
the bus. It is cleaner to do the STOP magic in i2c_read(), like
i2c_write() does. This may also help future multimaster systems which
wants to hold on to the bus until all transactions are finished.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2009-09-28 07:35:56 +02:00
Joakim Tjernlund
9940420212 fsl_i2c: Impl. AN2919, rev 5 to calculate FDR/DFSR
The latest AN2919 has changed the way FDR/DFSR should be calculated.
Update the driver according to spec. However, Condition 2
is not accounted for as it is not clear how to do so.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
2009-09-28 07:35:54 +02:00
Joakim Tjernlund
d01ee4db93 fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_{DFSR/FDR}
Some boards need a higher DFSR value than the spec currently
recommends so give these boards the means to define there own.

For completeness, add CONFIG_FSL_I2C_CUSTOM_FDR too.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2009-09-28 07:35:53 +02:00
Joakim Tjernlund
21f4cbb772 fsl_i2c: Wait for STOP condition to propagate
After issuing a STOP one must wait until the STOP has completed
on the bus before doing something new to the controller.

Also add an extra read of SR as the manual mentions doing that
is a good idea.

Remove surplus write of CR just before a write, isn't required and
could potentially disturb the I2C bus.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2009-09-28 07:35:52 +02:00
Kim Phillips
c7190f028f mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
some LCRR bits are not documented throughout the 83xx family RMs.
New board porters copying similar board configurations might omit
setting e.g., DBYP since it was not documented in their SoC's RM.

Prevent them bricking their board by retaining power on reset values
in bit fields that the board porter doesn't explicitly configure
via CONFIG_SYS_<registername>_<bitfield> assignments in the board
config file.

also move LCRR assignment to cpu_init_r[am] to help ensure no
transactions are being executed via the local bus while CLKDIV is being
modified.

also start to use i/o accessors.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-09-26 21:19:38 -05:00
Paul Gortmaker
00ec0ff549 sbc8349: tidy up Makefile to use new configuration script.
Commit 804d83a5 allows us to move all the configuration
variation tweaks out of the top level Makefile and down
into the board config header.  This takes advantage of
that for the sbc8349 board.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-09-25 18:27:54 -05:00