Commit Graph

39980 Commits

Author SHA1 Message Date
Keerthy
9017f1fa2a configs: dra7xx_evm_defconfig: Enable PALMAS options
Enable palmas PMIC config options.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-11 10:17:05 -06:00
Keerthy
884d88bc8b power: regulator: palmas: Add regulator support
The driver provides regulator set/get voltage
enable/disable functions for palmas family of PMICs.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-11 10:17:05 -06:00
Keerthy
33621d247e power: pmic: Palmas: Add the base pmic support
Add support to bind the regulators/child nodes with the pmic.
Also adds the pmic i2c based read/write funtions to access pmic
registers.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-11 10:17:05 -06:00
Keerthy
34514b8b9c power: regulator: Add ctrl_reg and volt_reg fields for pmic
The ctrl reg contains bit fields to enable and disable regulators,
and volt_reg has the bit fields to configure the voltage values.
The registers are frequently accessed hence make them part
of dm_regulator_uclass_platdata structure.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-11 10:17:04 -06:00
Keerthy
477dfe2ffc power: regulator: Add support for gpio regulators
Add support for gpio regulators. As of now this driver caters
to gpio regulators with one gpio. Supports setting voltage values to gpio
regulators and retrieving the values.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-11 10:17:04 -06:00
Simon Glass
252788b4ed dm: mmc: Enable DM_MMC_OPS by default with DM_MMC
These two options go together and it is best to do the conversion in one
step. So enable DM_MMC_OPS by default if DM_MMC is enabled.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-11 10:17:03 -06:00
Simon Glass
896a74f615 dm: blk: Enable CONFIG_BLK if DM_MMC is enabled
To speed up conversion to CONFIG_BLK, enable it by default when DM_MMC is
enabled.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-11 10:15:53 -06:00
Simon Glass
561e624c35 dm: mmc: Support erase
At present erase is not suported with CONFIG_DM_OPS. Add it so that MMC
devices can be erased.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-09 21:36:27 -06:00
York Sun
d5fe013cee tools: buildman: Add compiler wrapper
Now we can use compiler wrapper such as ccache or distcc for buildman.

Signed-off-by: York Sun <york.sun@nxp.com>
CC: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
York Sun
f40fa9b36f tools: buildman: Remove duplicated code
Signed-off-by: York Sun <york.sun@nxp.com>
CC: Simon Glass <sjg@chromium.org>
Fixed commit subject:
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Paul Burton
34c3889635 dtoc: Make integer division python 3.x safe
If we use the '/' operator then python 3.x will produce a float, and
refuse to multiply the string sequence in Conv_name_to_c by it with:

    TypeError: can't multiply sequence by non-int of type 'float'

Use the '//' operator instead to enforce that we want integer rather
than floating point division.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Paul Burton
c4c5f9eefb dtoc: Decode strings for struct.unpack on python 3.x
On python 3.x struct.unpack will complain if we provide it with a
string since it expects to operate on a bytes object. In order to
satisfy this requirement, encode the string to a bytes object when
running on python 3.x.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Paul Burton
4ae6549f8e dtoc: Use items() to iterate over dictionaries in python 3.x
In python 3.x the iteritems() method has been removed from dictionaries,
and the items() method does effectively the same thing. On python 2.x
using items() is a little less efficient since it involves copying data,
but as speed isn't a concern in the affected code switch to using
items() anyway for simplicity.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Paul Burton
f5d44b9bae patman: Fix doctest StringIO import for python 3.x
In python 3.x StringIO is no longer a module, and the class can instead
be found in the io module. Adjust the code in the doctest input to
account for both.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Paul Burton
c9eac38a25 patman: Use items() to iterate over dictionaries
In python 3.x the iteritems() method has been removed from dictionaries,
and the items() method does effectively the same thing. On python 2.x
using items() is a little less efficient since it involves copying data,
but as speed isn't a concern in this code switch to using items() anyway
for simplicity.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Paul Burton
2ce7b21e6c patman: Import 'configparser' lower case to be python 3.x safe
In python 3.x module names used in import statements are case sensitive,
and the configparser module is named in all lower-case. Import it as such
in order to avoid errors when running with python 3.x.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Paul Burton
ac3fde9394 patman: Make exception handling python 3.x safe
Syntax for exception handling is a little more strict in python 3.x.
Convert all uses to a form accepted by both python 2.x & python 3.x.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Paul Burton
a920a17b2f patman: Make print statements python 3.x safe
In python 3.x, print must be used as a function call. Convert all print
statements to the function call style, importing from __future__ where
we print with no trailing newline or print to a file object.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Paul Burton
12e5476df3 patman: Replace tabs with spaces
In preparation for running on python 3.x, which will refuse to run
scripts which mix tabs & spaces for indentation, replace 2 tab
characters present in series.py with spaces.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Simon Glass
3cb44ba80c dtoc: Add a way for tests to request the fallback library
We need to test both the normal (Python libfdt module) and fallback (fdtget)
implementations of the Fdt class. Add a way to select which implementation
to use.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Simon Glass
8828254cae dtoc: Adjust GetProps() in fdt_normal to use the node path
There is no need to pass a node path separately. Instead we should use the
path for the node provided. Correct this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Simon Glass
0734b70c9c dtoc: Fix bug in GetProp()
This does not actually call fdtget correctly when requesting a particular
type. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Moritz Fischer
bae5b97e8e cros_ec: Fix issue with cros_ec_flash_write command
This commit fixes an issue where data is written to an
invalid memory location.
The issue has been introduced in commit
(88364387 cros: add cros_ec_driver)

Cc: Simon Glass <sjg@chromium.org>
Cc: u-boot@lists.denx.de
Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Moritz Fischer
7a71e4891d cros_ec: Add crosec flashinfo command
Add command to print out the flash info as reported by the
ec. The data read back includes size, write block size,
erase block size.

Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: u-boot@lists.denx.de
Acked-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Moritz Fischer
281ca88fab cros_ec: Add function to read back flash parameters
Add support for reading back flash parameters as reported by
the ec.

Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: u-boot@lists.denx.de
Acked-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Simon Glass
2880e6b5e2 buildman: Drop the 'alive' flag in BuilderThread
This is not used, so drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Simon Glass
2f2566482f buildman: Don't show a stacktrace on Ctrl-C
When Ctrl-C is pressed, just exited quietly. There is no sense in displaying
a stack trace since buildman will always be in the same place: waiting for
threads to complete building all the jobs on the queue.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Simon Glass
63781bd65e buildman: Drop the 'active' flag in the builder
This serves no real purpose, since when we are not active, we exit. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Simon Glass
d436e38189 buildman: Allow builds to terminate cleanly
It is annoying that buildman does not respond cleanly to Ctrl-C or SIGINT,
particularly on machines with lots of CPUS. Unfortunately queue.join()
blocks the main thread and does not allow it to see the signal. Use a
separate thread instead,

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Simon Glass
a556eeebaa buildman: Put our local libraries first in the path
If patman is installed on the machine (e.g. in the standard dist-packages
directory), it will find libraries from there in preference to our local
libraries. Adjust the order of the path to ensure that local libraries are
found first.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Simon Glass
745b395aef buildman: Print a message indicating the build is starting
Make it clear when buildman actually starts building. This happens when it
has prepared the threads, working directory and output directories.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Simon Glass
b222abe736 buildman: Print a message when removing old directories
When buildman starts, it prepares its output directory by removing any old
build directories which will not be used this time. This can happen if a
previous build left directories around for commit hashes which are no-longer
part of the branch.

This can take quite a while, so print a message to indicate what is going
on.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Simon Glass
21f0eb332f buildman: Tidy up the 'cloning' message
On a machine with a lot of CPUs this prints a lot of useless lines of the
form:

   Cloning repo for thread <n>

Adjust the output so that these all appear on one line, and disappear when
the cloning is complete.

Note: This cloning is actually unnecessary and very wasteful on disk space
(about 3.5GB each time). It would be better to create symlinks.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Simon Glass
8b4919ed29 patman: Flush output when there is no newline
Output which does not include a newline will not be displayed unless
flushed. Add a flush to ensure that it becomes visible.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Tom Rini
f5fd45ff64 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2016-10-08 09:33:37 -04:00
Lokesh Vutla
1f95770807 ARM: AM437X: Add Silicon ID support
Add silicon ID code for AM437x silicon. This can be used to print
the cpu info using CONFIG_DISPLAY_CPUINFO.
Also printing "CPU :" along with cpu name in order to be consistent
with other OMAP platforms.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-10-08 09:33:36 -04:00
B, Ravi
d2d9bdfcf9 spl: saveenv: adding saveenv support in SPL
By default saveenv option is not supported for SPL. This patch
enable the support for save environment variable for SPL build.

Enable save environment support in SPL after setenv. By default
the saveenv option is not provided in SPL, but some boards need
this support in 'Falcon' boot, where SPL need to boot from
different images based on environment variable set by OS. For
example OS may set "reboot_image" environment variable to
"recovery" inorder to boot recovery image by SPL. The SPL read
"reboot_image" and act accordingly and change the reboot_image
to default mode using setenv and save the environemnt.

Signed-off-by: Ravi Babu <ravibabu@ti.com>
Reviewed-by: Simon Glass <sig@chromium.org>

change in v1:
	- dropped SUPPORT, use CONFIG_SPL_SAVEENV
	- updates the comments in mmc_private.h
2016-10-08 09:33:36 -04:00
Moritz Fischer
6d1a718fdf cros_ec: Honor the google,remote-bus dt property
Boards where ECs that use a I2C port != 0 specify this in the
devicetree file via the google,remote-bus property.
Previously this was ignored and hardcoded to port 0.

Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heiko Schocher <hs@denx.de>
Cc: u-boot@lists.denx.de
Acked-by: Simon Glass <sjg@chromium.org>
2016-10-08 09:33:36 -04:00
Mugunthan V N
1053a769fb board: ti: dra7xx: complex definitions should be protected with parentheses
As a standard practice complex definitions should be protected
with parentheses, as it might fail when used in a complex if
statements.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-08 09:33:35 -04:00
Mugunthan V N
e8131386dc ARM: dts: dra72: add rev C evm support
Add DTS support for dra72 evm Rev C which has the following
changes
* Two ethernet ports now instead of the single one in rev B.
* DP83867 ethernet phy instead of DP838865.

Cc: Vignesh R <vigneshr@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-08 09:33:35 -04:00
Alexander Graf
692fcdd800 arm: Add return value argument to longjmp
The normal longjmp command allows for a caller to pass the return value
of the setjmp() invocation. This patch adds that semantic to the arm
implementation of it and adjusts the efi_loader call respectively.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-08 09:33:34 -04:00
B, Ravi
d40dbfb740 env: tool: add command line option to input lockfile path
The default lockname is set to /var/lock. This limits the
usage of this application where OS uses different lockfile
location parameter.
For example, In case of android, the default lock
path location is /data.
Hence by providing the command line option to input lockfile
path will be useful to reuse the tool across multiple
operating system.

usage: ./fw_printenv -l <lockfile path>

Signed-off-by: Ravi Babu <ravibabu@ti.com>
2016-10-08 09:33:34 -04:00
B, Ravi
279dcd8975 dra7x: dfu: qspi: increase the qspi spl partition to 256K
The SPL size for dra7x platform increased beyond 64K,
increasing the size to 256K to cater for future enhancement.

Signed-off-by: Ravi Babu <ravibabu@ti.com>
2016-10-08 09:33:33 -04:00
B, Ravi
480579670b dra7xx: config: cleanup: moved to kconfig for CONFIG_SPL_ENV_SUPPORT
removing CONFIG_SPL_ENV_SUPPORT defined in header files
due to moved to kconfig option for CONFIG_SPL_ENV_SUPPORT

Signed-off-by: Ravi Babu <ravibabu@ti.com>
2016-10-08 09:33:33 -04:00
Masahiro Yamada
021abf696f Revert "ns16650: Make sure we have CONFIG_CLK set before using infrastructure"
This reverts commit 82f5279b0c.

The build failure of k2*evm boards was fixed in a different way by
the previous commit.  It is nasty to patch generic drivers around
with #ifdef CONFIG_CLK just for the KeyStone's matter.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-08 09:33:31 -04:00
Masahiro Yamada
43ebbfc39f ARM: keystone: rename clk_get_rate() to ks_clk_get_rate()
The KeyStone platform has its own clk_get_rate() but its prototype
is different from that of the common-clk (clk-uclass) framework.

Prefix the KeyStone specific implementation with ks_ in order to
avoid name-space conflict.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-08 09:33:13 -04:00
Ken Lin
3dddc793e0 board: ge: bx50v3: Pass video bootargs for b850v3
Due to clock source restrictions on i.MX6, certain pixel clock rates can
not be supported. Hence default the resolution/frame rate during boot to a
supported value by passing video bootargs 1024x768@60 for
HDMI (Display Port1) and LVDS (Display Port2) on B850v3.

Signed-off-by: Ken Lin <ken.lin@advantech.com.tw>
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
2016-10-07 16:32:28 +02:00
Masahiro Yamada
2846bd03ea ARM: keystone: remove declaration of unused functions
These two functions are neither defined nor referenced.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-07 14:26:35 +00:00
Masahiro Yamada
e19b0fb485 kbuild: generate u-boot.cfg as a byproduct of include/autoconf.mk
Our build system still parses ad-hoc CONFIG options in header files
and generates include/autoconf.mk so that Makefiles can reference
them.  This gimmick was introduced in the pre-Kconfig days and will
be kept until Kconfig migration is completed.

The include/autoconf.mk is generated like follows:

  [1] Preprocess include/common.h with -DDO_DEPS_ONLY and
      retrieve macros into include/autoconf.mk.tmp
  [2] Reformat include/autoconf.mk.dep into include/autoconf.mk
      with tools/scripts/define2mk.sed script
  [3] Remove include/autoconf.mk.tmp

Here, include/autoconf.mk.tmp is similar to u-boot.cfg, which is
also generated by preprocessing include/config.h with -DDO_DEPS_ONLY.
In other words, there is much overlap among include/autoconf.mk and
u-boot.cfg build rules.

So, the idea is to split the build rule of include/autoconf.mk
into two stages.  The first preprocesses headers into u-boot.cfg.
The second parses the u-boot.cfg into include/autoconf.mk.  The
build rules of u-boot.cfg in Makefile and spl/Makefile will be gone.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-07 14:26:34 +00:00
Masahiro Yamada
1406992f4f kbuild: make dependencies in scripts/Makefile.autoconf more readable
I do not remember why I wrote the code like this, but let's make it
a bit more readable.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-07 14:26:34 +00:00