Commit Graph

11930 Commits

Author SHA1 Message Date
Peng Fan
8df42bee0e misc: mxc_ocotp: check fuse word before programming on i.MX7ULP
On i.MX7ULP, the fuse words (except bank 0 and 1) only supports to
write once, because they use ECC mode. Multiple writes may damage
the ECC value and cause a wrong fuse value decoded when reading.
This patch adds a checking before the fuse word programming, only
can write when the word value is 0.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-01-12 14:28:04 +01:00
Tom Rini
1a62f8597c Merge git://git.denx.de/u-boot-video 2018-01-11 13:43:36 -05:00
Tom Rini
6bf634223a Merge git://git.denx.de/u-boot-fsl-qoriq 2018-01-11 11:18:49 -05:00
Tom Rini
e38c66edae Merge git://git.denx.de/u-boot-usb 2018-01-11 11:18:29 -05:00
Hannes Schmelzer
8a094f508c am335x-fb: setup display PLL
The LCDC IP-core an be feed from several clock sources, one of those is
a dedicated DPLL for generating a dividable base-clock for this IP-core.

The TRM specifies the maximum input frequency for the LCCD with 200 MHz,
so we must not exceed this value with the PLL frequency (which can lock
much higher).

This patch tries every combination of multipliers and divisors of the
PLL and the IP-core itself for getting as near as possible the the
requested panel->pxl_clk.

Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2018-01-11 15:19:12 +01:00
Hannes Schmelzer
0d8a7d6fa8 am335x-fb: cosmetic: fix coding style
Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2018-01-11 15:18:28 +01:00
Hannes Schmelzer
e880a5e219 am335x-fb: cosmetic: update-copyright
Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2018-01-11 15:17:09 +01:00
Ahmed Mansour
541d57663f configs: Move SYS_DPAA_QBMAN to Kconfig
The CONFIG_SYS_DPAA_QBMAN define is used by DPAA1 freescale SOCs to
add device tree fixups that allow deep sleep in Linux. The define was
placed in header files included by a number of boards, but was not
explicitly documented in any of the Kconfigs. A description was added
to the drivers/networking menuconfig and default selection for
current SOCs that have this part

Signed-off-by: Ahmed Mansour <ahmed.mansour@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-10 12:28:58 -08:00
Ahmed Mansour
44262327aa drivers/misc: Share qbman init between archs
This patch adds changes necessary to move functionality present in
PowerPC folders with ARM architectures that have DPAA1 QBMan hardware

- Create new board/freescale/common/fsl_portals.c to house shared
  device tree fixups for DPAA1 devices with ARM and PowerPC cores
- Add new header file to top includes directory to allow files in
  both architectures to grab the function prototypes
- Port inhibit_portals() from PowerPC to ARM. This function is used in
  setup to disable interrupts on all QMan and BMan portals. It is
  needed because the interrupts are enabled by default for all portals
  including unused/uninitialised portals. When the kernel attempts to
  go to deep sleep the unused portals prevent it from doing so

Signed-off-by: Ahmed Mansour <ahmed.mansour@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-10 12:28:47 -08:00
Tom Rini
084edbb689 Merge git://git.denx.de/u-boot-marvell 2018-01-10 08:05:57 -05:00
Tuomas Tynkkynen
55acf49eab PCI: Drop CONFIG_TSI108_PCI
Last user of this option went away in 2015 in commit:
d928664f41 ("powerpc: 74xx_7xx: remove 74xx_7xx cpu support")

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-10 08:05:49 -05:00
Patrice Chotard
0b3f789ad1 ram: stm32: add memory mapping selection support
This allows to controls the memory internal mapping at
address 0x0000 0000.
We can either map at 0x0000 0000 :
  _ main flash memory
  _ system flash memory
  _ FMC bank1 (NOR/PSRAM 1 and 2)
  _ embedded SRAM
  _ FMC/SDRAM bank1

This is needed for future STM32F469-disco board

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-10 08:05:47 -05:00
Patrice Chotard
c8f787760e board: stm32f429-disco: switch to DM STM32 pinctrl and gpio driver
Use available DM stm32f7_gpio.c and pinctrl_stm32.c drivers
instead of board GPIO initialization.

Remove stm32_gpio.c which is no more used and migrate
structs stm32_gpio_regs and stm32_gpio_priv into
arch-stm32f4/gpio.h to not break compilation.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-10 08:05:46 -05:00
Patrice Chotard
4a56fd484a board: stm32f429-disco: switch to DM STM32 clock driver
Use available DM clk_stm32f.c driver instead of dedicated
mach-stm32/stm32f4/clock.c.

Migrate periph_clock defines from stm32_periph.h directly in
CLK driver. These periph_clock defines will be removed when STMMAC,
TIMER2 and SYSCFG drivers will support DM CLK.

Enable also CLK flag.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-10 08:05:46 -05:00
Patrice Chotard
2d18d72858 board: stm32f429-disco: switch to DM STM32 serial driver
Remove serial_stm32.c driver and uart init from board file,
use available DM serial_stm32x7.c driver compatible for
STM32F4/F7 and H7 SoCs.

The serial_stm32x7.c driver will be renamed later with a more
generic name as it's shared with all STM32 Socs.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-10 08:05:46 -05:00
Patrice Chotard
98693c22d9 pinctrl: stm32: add stm32f4 pinctrl compatible strings
STM32F4 SoCs uses the same pinctrl block as found into
STM32F7 and H7 SoCs.
We can add "st,stm32f429-pinctrl" and "st,stm32f469-pinctrl"
compatible string into pinctrl_stm32.c.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-10 08:05:45 -05:00
Eddie Cai
bf2b72bef1 usb: rockchip: add the rockusb gadget
this patch implement rockusb protocol on the device side. this is based on
USB download gadget infrastructure. the rockusb function implements the rd,
wl, rid commands. it can work with rkdeveloptool

Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-10 11:11:05 +01:00
Chen-Yu Tsai
f4f9896ac3 musb: sunxi: Use base address from device tree
Now that the musb sunxi glue driver is completely device model / device
tree driven, we should use the base address from the device tree,
instead of hard-coding it in the source code.

Fixes: 3a61b080ac ("musb: sunxi: switch to the device model")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-01-10 11:11:05 +01:00
Miquel Raynal
3f3946d30d pinctrl: mvebu: Make drivers depend on the pinctrl framework
Armada pinctrl drivers shall not be compiled without the entire pinctrl
framework and thus lack a "depends on" condition, otherwise the driver
will simply not be probed.

Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-01-09 16:41:00 +01:00
Miquel Raynal
e7ab2ccd15 ARM: mvebu: Allow MVNETA to be selected with Armada 3700 SoCs
Until now, Armada 3700 SoCs could not enable the mvneta driver, and thus
did not benefit from Ethernet support. Add ARMADA_3700 in the
"depends on" list of the MVNETA Kconfig entry.

Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-01-09 16:41:00 +01:00
Ran Wang
91f4fb9b89 arm64: layerscape: Move CONFIG_HAS_FSL_DR_USB to Kconfig
Rename to USB_EHCI_FSL, use Kconfig to select ehci accordingly.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
2018-01-09 12:37:15 +01:00
Ran Wang
be3872ea81 usb: ehci: fsl: Fix some compile warnings.
When enable CONFIG_HAS_FSL_DR_USB, we might encounter below compile
warning, apply this patch can fix it:

drivers/usb/host/ehci-fsl.c:109:4: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
   ((u32)hccr + HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
    ^
drivers/usb/host/ehci-fsl.c:108:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
  hcor = (struct ehci_hcor *)
         ^
drivers/usb/host/ehci-fsl.c:115:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
        (u32)hccr, (u32)hcor,
        ^
include/log.h:131:26: note: in definition of macro 'debug_cond'
    printf(pr_fmt(fmt), ##args); \
                          ^~~~
drivers/usb/host/ehci-fsl.c:114:2: note: in expansion of macro 'debug'
  debug("ehci-fsl: init hccr %x and hcor %x hc_length %d\n",
  ^~~~~
drivers/usb/host/ehci-fsl.c:115:19: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
        (u32)hccr, (u32)hcor,
                   ^
include/log.h:131:26: note: in definition of macro 'debug_cond'
    printf(pr_fmt(fmt), ##args); \
                          ^~~~
drivers/usb/host/ehci-fsl.c:114:2: note: in expansion of macro 'debug'
  debug("ehci-fsl: init hccr %x and hcor %x hc_length %d\n",
  ^~~~~

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
2018-01-09 12:37:15 +01:00
Elaine Zhang
538f67c332 rockchip: clk: bind reset driver
Bind rockchip reset to clock-controller with rockchip_reset_bind().

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-09 11:13:32 +01:00
Elaine Zhang
760188c1aa rockchip: reset: support a (common) rockchip reset drivers
Create driver to support the soft reset (i.e. peripheral)
of all Rockchip SoCs.

Example of usage:
i2c driver:
	ret = reset_get_by_name(dev, "i2c", &reset_ctl);
	if (ret) {
		error("reset_get_by_name() failed: %d\n", ret);
	}

	reset_assert(&reset_ctl);
	udelay(50);
	reset_deassert(&reset_ctl);

i2c dts node:
resets = <&cru SRST_P_I2C1>, <&cru SRST_I2C1>;
reset-names = "p_i2c", "i2c";

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
[Fixed commit tag:]
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-09 11:13:32 +01:00
Tom Rini
2f4c9de3d0 Merge git://git.denx.de/u-boot-imx 2018-01-08 12:51:47 -05:00
Jagan Teki
ca9d211e2c mtd: nand: mxs_nand_spl: Remove nand size print
It is not much needed to print nand size in SPL during nand boot,
and most of nand spl drivers doesn't print the same.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-01-08 17:37:12 +01:00
Clemens Gruber
598e9dccc7 crypto/fsl: fix BLOB encapsulation and decapsulation
The blob_encap and blob_decap functions were not flushing the dcache
before passing data to CAAM/DMA and not invalidating the dcache when
getting data back.
Therefore, blob encapsulation and decapsulation failed with errors like
the following due to data cache incoherency:
"40000006: DECO: desc idx 0: Invalid KEY command"

To ensure coherency, we require the key_mod, src and dst buffers to be
aligned to the cache line size and flush/invalidate the memory regions.
The same requirements apply to the job descriptor.

Tested on an i.MX6Q board.

Reviewed-by: Sumit Garg <sumit.garg@nxp.com>
Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
2018-01-08 08:26:03 -05:00
Fabio Estevam
290e7cfdbf mx6ull: Handle the CONFIG_MX6ULL cases correctly
Since commit 051ba9e082 ("Kconfig: mx6ull: Deselect MX6UL from
CONFIG_MX6ULL") CONFIG_MX6ULL does not select CONFIG_MX6UL anymore, so
take this into consideration in all the checks for CONFIG_MX6UL.

This fixes a boot regression.

Reported-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Tested-by: Breno Lima <breno.lima@nxp.com>
Tested-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Tested-by: Jörg Krause <joerg.krause@embedded.rocks>
2018-01-04 16:29:04 +01:00
Peng Fan
f9d891f0a9 video: Support multiple lines version string display
The calculation of left space for version string is not correct, should
use VIDEO_COLS not VIDEO_LINE_LEN / 2, otherwise we will get larger space
than actual have and cause string to overlay logo picture.

Also current version string display only supports two lines words at max.
This also causes overlay when the LCD pixel column size is not enough.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Anatolij Gustschin <agust@denx.de>
2018-01-03 11:53:48 +01:00
Peng Fan
cca3ff054a video: ipu: Fix dereferencing NULL pointer problem
The clk_set_rate function dereferences the clk pointer without
checking whether it is NULL. This may cause problem when clk is NULL.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2018-01-03 09:46:52 +01:00
Felix Brack
46caea7f96 power: tps65910: replace error() by pr_err()
The patch replaces the former error() by the new pr_err().
This makes the TPS65910 driver conform to Masahiro's patch
'treewide:replace with error() with pr_err()' introduced
October 2017.

Signed-off-by: Felix Brack <fb@ltec.ch>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-01 09:04:19 -05:00
Tom Rini
b55c89ce02 Merge git://git.denx.de/u-boot-spi 2017-12-19 07:57:40 -05:00
Tom Rini
76cc372879 Merge git://git.denx.de/u-boot-sunxi 2017-12-19 07:57:33 -05:00
Sean Nyekjaer
065592b40b mtd/spi: fix block count for is25lq040b
This spi-nor is 4Mbit/512KB

Fixes: b4fbcbc5a5 ("mtd/spi: add support for is25lq040b")
Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-12-19 17:33:48 +05:30
Tom Rini
1a3fc354b5 Merge git://git.denx.de/u-boot-fsl-qoriq 2017-12-18 18:39:00 -05:00
Jerome Brunet
30cbb524bc net: phy: meson-gxl: detect LPA corruption
This patch is ported from the Linux patch posted at [1] and applied to
net tree as commit f1e2400a80ff.

The purpose of this change is to fix the incorrect detection of the link
partner (LP) advertised capabilities which sometimes happens with this PHY
(roughly 1 time in a dozen)

This issue may cause the link to be negotiated at 10Mbps/Full or
10Mbps/Half when 100MBps/Full is actually possible. In some case, the link
is even completely broken and no communication is possible.

To detect the corruption, we must look for a magic undocumented bit in the
WOL bank (hint given by the SoC vendor kernel) but this is not enough to
cover all cases. We also have to look at the LPA ack. If the LP supports
Aneg but did not ack our base code when aneg is completed, we assume
something went wrong.

The detection of a corrupted LPA triggers a restart of the aneg process.
This solves the problem but may take up to 6 retries to complete.

[1] https://lkml.kernel.org/r/20171208110811.30789-1-jbrunet@baylibre.com

Fixes: 8995a96d1d ("net: phy: Add Amlogic Meson GXL Internal PHY support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-12-18 13:06:30 -05:00
Tom Rini
90d75d2efc Xilinx changes for v2018.01-rc2-v2
fpga:
 - Enable loading bitstream via fit image for !xilinx platforms
 
 zynq:
 - Fix SPL SD boot mode
 
 zynqmp:
 - Not not reset in panic
 - Do not use simple allocator because of fat changes
 - Various dt chagnes
 - modeboot variable setup
 - Fix fpga loading on automotive devices
 - Fix coverity issues
 
 test:
 - Fix env test for !hush case - Stephen's patch
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlo3tMgACgkQykllyylKDCFQvQCfeFgaC/95gx9orLrHxpDx7s46
 wwYAmwSoXn6hc9bEzgKIppQHblzfqGU6
 =mscK
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2018.01-rc2-v2' of git://www.denx.de/git/u-boot-microblaze

Xilinx changes for v2018.01-rc2-v2

fpga:
- Enable loading bitstream via fit image for !xilinx platforms

zynq:
- Fix SPL SD boot mode

zynqmp:
- Not not reset in panic
- Do not use simple allocator because of fat changes
- Various dt chagnes
- modeboot variable setup
- Fix fpga loading on automotive devices
- Fix coverity issues

test:
- Fix env test for !hush case - Stephen's patch
2017-12-18 12:23:27 -05:00
Tom Rini
15616a0aa5 Merge git://git.denx.de/u-boot-dm 2017-12-14 15:46:07 -05:00
Goldschmidt Simon
8b93a92f6d fpga: allow programming fpga from FIT image for all FPGA drivers
This drops the limit that fpga is only loaded from FIT images for Xilinx.
This is done by moving the 'partial' check from 'common/image.c' to
'drivers/fpga/xilinx.c' (the only driver supporting partial images yet)
and supplies a weak default implementation in 'drivers/fpga/fpga.c'.

Signed-off-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com>
Tested-by: Michal Simek <michal.simek@xilinx.com> (On zcu102)
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-12-14 16:09:39 +01:00
Tom Rini
6b308494c5 Merge branch 'master' of git://git.denx.de/u-boot-usb 2017-12-13 17:58:36 -05:00
Tom Rini
fd12455643 Merge branch 'rmobile-mx' of git://git.denx.de/u-boot-sh 2017-12-13 17:58:27 -05:00
Wenbin song
a8f33034f2 armv8: ls1043a/ls2080a: check SoC by device ID
Check LS1043A/LS2080a by device ID without using personality ID to
determine revision number. This check applies to all various
personalities of the same SoC family.

Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-13 13:40:29 -08:00
Felix Brack
854dfbf99b power: pmic/regulator: Add basic support for TPS65910
Texas Instrument's TPS65910 PMIC contains 3 buck DC-DC converts, one
boost DC-DC converter and 8 LDOs. This patch implements driver model
support for the TPS65910 PMIC and its regulators making the get/set
API for regulator value/enable available.
This patch depends on the patch "am33xx: Add a function to query MPU
voltage in uV" to build correctly. For boards relying on the DT
include file tps65910.dtsi the v3 patch "power: extend prefix match
to regulator-name property" and an appropriate regulator naming is
also required.

Signed-off-by: Felix Brack <fb@ltec.ch>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-12-12 19:53:45 -07:00
Stefan Roese
8a5cbc065d dm: blk: Use uclass_find_first/next_device() in blk_first/next_device()
This patch changes the calls to uclass_first/next_device() in blk_first/
next_device() to use uclass_find_first/next_device() instead. These functions
don't prepare the devices, which is correct in this case.

With this patch applied, the "usb storage" command now works again as
expected:

=> usb storage
  Device 0: Vendor: SanDisk Rev: 1.00 Prod: Ultra
  Type: Removable Hard Disk
  Capacity: 58656.0 MB = 57.2 GB (120127488 x 512)

Without this patch, it used to generate this buggy output:

=> usb storage
Card did not respond to voltage select!
mmc_init: -95, time 26
No storage devices, perhaps not 'usb start'ed..?

Signed-off-by: Stefan Roese <sr@denx.de>
Suggested-by: Simon Glass <sjg@chromium.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-12-12 19:53:45 -07:00
Felix Brack
bf802f5d54 power: extend prefix match to regulator-name property
This patch extends pmic_bind_children prefix matching. In addition to
the node name the property regulator-name is used while trying to match
prefixes. This allows assigning different drivers to regulator nodes
named regulator@1 and regulator@10 for example.
I have discarded the idea of using other properties then regulator-name
as I do not see any benefit in using property compatible or even
regulator-compatible. Of course I am open to change this if there are
good reasons to do so.

Signed-off-by: Felix Brack <fb@ltec.ch>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-12-12 19:53:45 -07:00
Philipp Tomsich
b53f6992e9 dm: reset: have the reset-command perform a COLD reset
The DM version of do_reset has been issuing a warm-reset, which (on
some platforms keeps GPIOs and other parts of the platform active).
This may cause unintended behaviour, as calling do_reset usually
indicates a desire to reset the board/platform and not just the CPU.

This changes do_reset to always request a COLD reset.
Note that programmatic uses can still invoke a WARM reset through
reset_cpu() or using sysreset_walk().

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-12-12 19:53:45 -07:00
Jorge Ramirez-Ortiz
bd3006c849 drivers: spmi-msm: fix scanning for peripherals
A typo in the probe function causes not all peripherals to be scanned
(in the case of the Dragonboard820c - work in progress - it wont find pmic0).
2017-12-12 21:33:38 -05:00
Tuomas Tynkkynen
cf71338ee7 ata: Migrate CONFIG_MVSATA_IDE to Kconfig
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12 18:16:06 -05:00
Tuomas Tynkkynen
b82e667f79 ata: Migrate CONFIG_LIBATA to Kconfig
This symbol enables some library code used by various SATA drivers,
so make this a non-user-visible symbol select'ed by the respective
drivers, and let moveconfig handle the rest.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12 18:16:05 -05:00
Tuomas Tynkkynen
9fd95ef0d3 ata: Migrate CONFIG_SCSI_AHCI to Kconfig
And use 'imply' liberally.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12 18:13:19 -05:00