Merge git://git.denx.de/u-boot-video

This commit is contained in:
Tom Rini 2018-01-11 13:43:36 -05:00
commit 1a62f8597c
7 changed files with 71 additions and 26 deletions

View File

@ -104,6 +104,7 @@ extern const struct dpll_regs dpll_mpu_regs;
extern const struct dpll_regs dpll_core_regs;
extern const struct dpll_regs dpll_per_regs;
extern const struct dpll_regs dpll_ddr_regs;
extern const struct dpll_regs dpll_disp_regs;
extern const struct dpll_params dpll_mpu_opp[NUM_CRYSTAL_FREQ][NUM_OPPS];
extern const struct dpll_params dpll_core_1000MHz[NUM_CRYSTAL_FREQ];
extern const struct dpll_params dpll_per_192MHz[NUM_CRYSTAL_FREQ];

View File

@ -52,6 +52,13 @@ const struct dpll_regs dpll_ddr_regs = {
.cm_div_m2_dpll = CM_WKUP + 0xA0,
};
const struct dpll_regs dpll_disp_regs = {
.cm_clkmode_dpll = CM_WKUP + 0x98,
.cm_idlest_dpll = CM_WKUP + 0x48,
.cm_clksel_dpll = CM_WKUP + 0x54,
.cm_div_m2_dpll = CM_WKUP + 0xA4,
};
struct dpll_params dpll_mpu_opp100 = {
CONFIG_SYS_MPUCLK, OSC-1, 1, -1, -1, -1, -1};
const struct dpll_params dpll_core_opp100 = {

View File

@ -120,9 +120,6 @@ void am33xx_spl_board_init(void)
};
do_enable_clocks(clk_domains, clk_modules_tsspecific, 1);
/* setup LCD-Pixel Clock */
writel(0x2, &cmdpll->clklcdcpixelclk); /* clock comes from perPLL M2 */
/* setup I2C */
enable_i2c_pin_mux();
i2c_set_bus_num(0);

View File

@ -114,8 +114,6 @@ void am33xx_spl_board_init(void)
0
};
do_enable_clocks(clk_domains, clk_modules_xre1specific, 1);
/* setup LCD-Pixel Clock */
writel(0x2, CM_DPLL + 0x34);
/* power-OFF LCD-Display */
gpio_direction_output(LCD_PWR, 0);

View File

@ -139,13 +139,7 @@ int load_lcdtiming(struct am335x_lcdpanel *panel)
pnltmp.vsw = FDTPROP(PATHTIM, "vsync-len");
pnltmp.pup_delay = FDTPROP(PATHTIM, "pupdelay");
pnltmp.pon_delay = FDTPROP(PATHTIM, "pondelay");
/* calc. proper clk-divisor */
dtbprop = FDTPROP(PATHTIM, "clock-frequency");
if (dtbprop != ~0UL)
pnltmp.pxl_clk_div = 192000000 / dtbprop;
else
pnltmp.pxl_clk_div = ~0UL;
pnltmp.pxl_clk = FDTPROP(PATHTIM, "clock-frequency");
/* check polarity of control-signals */
dtbprop = FDTPROP(PATHTIM, "hsync-active");
@ -195,7 +189,7 @@ int load_lcdtiming(struct am335x_lcdpanel *panel)
pnltmp.vfp = env_get_ulong("ds1_vfp", 10, ~0UL);
pnltmp.vbp = env_get_ulong("ds1_vbp", 10, ~0UL);
pnltmp.vsw = env_get_ulong("ds1_vsw", 10, ~0UL);
pnltmp.pxl_clk_div = env_get_ulong("ds1_pxlclkdiv", 10, ~0UL);
pnltmp.pxl_clk = env_get_ulong("ds1_pxlclk", 10, ~0UL);
pnltmp.pol = env_get_ulong("ds1_pol", 16, ~0UL);
pnltmp.pup_delay = env_get_ulong("ds1_pupdelay", 10, ~0UL);
pnltmp.pon_delay = env_get_ulong("ds1_tondelay", 10, ~0UL);
@ -211,7 +205,7 @@ int load_lcdtiming(struct am335x_lcdpanel *panel)
~0UL == (pnltmp.vfp) ||
~0UL == (pnltmp.vbp) ||
~0UL == (pnltmp.vsw) ||
~0UL == (pnltmp.pxl_clk_div) ||
~0UL == (pnltmp.pxl_clk) ||
~0UL == (pnltmp.pol) ||
~0UL == (pnltmp.pup_delay) ||
~0UL == (pnltmp.pon_delay)
@ -234,7 +228,7 @@ int load_lcdtiming(struct am335x_lcdpanel *panel)
pnltmp.hactive, pnltmp.vactive, pnltmp.bpp,
pnltmp.hfp, pnltmp.hbp, pnltmp.hsw,
pnltmp.vfp, pnltmp.vbp, pnltmp.vsw,
pnltmp.pxl_clk_div, pnltmp.pol, pnltmp.pon_delay);
pnltmp.pxl_clk, pnltmp.pol, pnltmp.pon_delay);
return -1;
}

View File

@ -1,6 +1,6 @@
/*
* Copyright (C) 2013 Hannes Schmelzer <oe5hpm@oevsv.at>
* Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
* Copyright (C) 2013-2018 Hannes Schmelzer <oe5hpm@oevsv.at>
* B&R Industrial Automation GmbH - http://www.br-automation.com
*
* minimal framebuffer driver for TI's AM335x SoC to be compatible with
* Wolfgang Denk's LCD-Framework (CONFIG_LCD, common/lcd.c)
@ -12,7 +12,11 @@
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/hardware.h>
#include <asm/arch/omap.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <lcd.h>
#include "am335x-fb.h"
@ -20,6 +24,7 @@
#error "hw-base address of LCD-Controller (LCD_CNTL_BASE) not defined!"
#endif
#define LCDC_FMAX 200000000
/* LCD Control Register */
#define LCD_CLK_DIVISOR(x) ((x) << 8)
@ -96,6 +101,7 @@ struct am335x_lcdhw {
};
static struct am335x_lcdhw *lcdhw = (void *)LCD_CNTL_BASE;
DECLARE_GLOBAL_DATA_PTR;
int lcd_get_size(int *line_length)
@ -108,11 +114,16 @@ int am335xfb_init(struct am335x_lcdpanel *panel)
{
u32 raster_ctrl = 0;
if (0 == gd->fb_base) {
struct cm_dpll *const cmdpll = (struct cm_dpll *)CM_DPLL;
struct dpll_params dpll_disp = { 1, 0, 1, -1, -1, -1, -1 };
unsigned int m, n, d, best_d = 2;
int err = 0, err_r = 0;
if (gd->fb_base == 0) {
printf("ERROR: no valid fb_base stored in GLOBAL_DATA_PTR!\n");
return -1;
}
if (0 == panel) {
if (panel == NULL) {
printf("ERROR: missing ptr to am335x_lcdpanel!\n");
return -1;
}
@ -132,14 +143,51 @@ int am335xfb_init(struct am335x_lcdpanel *panel)
return -1;
}
/* check given clock-frequency */
if (panel->pxl_clk > (LCDC_FMAX / 2)) {
pr_err("am335x-fb: requested pxl-clk: %d not supported!\n",
panel->pxl_clk);
return -1;
}
debug("setting up LCD-Controller for %dx%dx%d (hfp=%d,hbp=%d,hsw=%d / ",
panel->hactive, panel->vactive, panel->bpp,
panel->hfp, panel->hbp, panel->hsw);
debug("vfp=%d,vbp=%d,vsw=%d / clk-div=%d)\n",
panel->vfp, panel->vfp, panel->vsw, panel->pxl_clk_div);
debug("vfp=%d,vbp=%d,vsw=%d / clk=%d)\n",
panel->vfp, panel->vfp, panel->vsw, panel->pxl_clk);
debug("using frambuffer at 0x%08x with size %d.\n",
(unsigned int)gd->fb_base, FBSIZE(panel));
/* setup display pll for requested clock frequency */
err = panel->pxl_clk;
err_r = err;
for (d = 2; d < 255; d++) {
for (m = 2; m < 2047; m++) {
if ((V_OSCK * m) < (panel->pxl_clk * d))
continue;
n = (V_OSCK * m) / (panel->pxl_clk * d);
if (n > 127)
break;
if (((V_OSCK * m) / n) > LCDC_FMAX)
break;
err = abs((V_OSCK * m) / n / d - panel->pxl_clk);
if (err < err_r) {
err_r = err;
dpll_disp.m = m;
dpll_disp.n = n;
best_d = d;
}
}
}
debug("%s: PLL: best error %d Hz (M %d, N %d, DISP %d)\n",
__func__, err_r, dpll_disp.m, dpll_disp.n, best_d);
do_setup_dpll(&dpll_disp_regs, &dpll_disp);
/* clock source for LCDC from dispPLL M2 */
writel(0x0, &cmdpll->clklcdcpixelclk);
/* palette default entry */
memset((void *)gd->fb_base, 0, 0x20);
*(unsigned int *)gd->fb_base = 0x4000;
@ -147,14 +195,14 @@ int am335xfb_init(struct am335x_lcdpanel *panel)
gd->fb_base += 0x20;
/* turn ON display through powercontrol function if accessible */
if (0 != panel->panel_power_ctrl)
if (panel->panel_power_ctrl != NULL)
panel->panel_power_ctrl(1);
debug("am335x-fb: wait for stable power ...\n");
mdelay(panel->pup_delay);
lcdhw->clkc_enable = LCD_CORECLKEN | LCD_LIDDCLKEN | LCD_DMACLKEN;
lcdhw->raster_ctrl = 0;
lcdhw->ctrl = LCD_CLK_DIVISOR(panel->pxl_clk_div) | LCD_RASTER_MODE;
lcdhw->ctrl = LCD_CLK_DIVISOR(best_d) | LCD_RASTER_MODE;
lcdhw->lcddma_fb0_base = gd->fb_base;
lcdhw->lcddma_fb0_ceiling = gd->fb_base + FBSIZE(panel);
lcdhw->lcddma_fb1_base = gd->fb_base;

View File

@ -1,6 +1,6 @@
/*
* Copyright (C) 2013 Hannes Schmelzer <oe5hpm@oevsv.at> -
* Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
* Copyright (C) 2013-2018 Hannes Schmelzer <oe5hpm@oevsv.at> -
* B&R Industrial Automation GmbH - http://www.br-automation.com
*
* SPDX-License-Identifier: GPL-2.0+
*/
@ -53,7 +53,7 @@ struct am335x_lcdpanel {
unsigned int vfp; /* Vertical front porch */
unsigned int vbp; /* Vertical back porch */
unsigned int vsw; /* Vertical Sync Pulse Width */
unsigned int pxl_clk_div; /* Pixel clock divider*/
unsigned int pxl_clk; /* Pixel clock */
unsigned int pol; /* polarity of sync, clock signals */
unsigned int pup_delay; /*
* time in ms after power on to