Commit Graph

69549 Commits

Author SHA1 Message Date
Samuel Holland
2fcd74899c sunxi: board: Use a more descriptive variable name
The variable "cmp_str" always leaves me wondering if it is the DT name
of the current board (yes) or DT name in the FIT config entry (no).

In preparation for expanding the functionality here, rename it to
something that obviously means "this is the DT name we are looking for".

Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-11-17 00:42:20 +00:00
Tom Rini
9324c9a823 Merge tag 'ti-v2021.01-rc3' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti
- Fix Nokia RX-51 boot issues
- Fix CONFIG_LOGLEVEL on K3 devices
- Add phyBOARD REGOR support
2020-11-16 13:42:29 -05:00
Tom Rini
530dcdd07c - Clock fix MMC driver for SM1 based platforms
- sync SOC Ids from Linux 5.10-rc1
 - fix potential build warning on meson_dw_hdmi and meson-g12a-usb2 phy
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAl+yUlUACgkQd9zb2sjI
 SdE/qg/+LFGSw26m9u0G9Umfpogy0DW73aJv/MOA3xcEyk7k2Cc6lJ6agk2oll7v
 6Uus8zZXWnPOQ/M2utELGIXBqP9J9i+I6JdGb5t7e0NqpzJqJiVUWIeuuDg9zSqP
 ZZmw3JoNRsMsrUBxJREOM2ERFYhYUkNM0EK7mRzoKs7kKYiJ4TsjeXpuDyxvZQ1o
 La9BGyiAAB+n3hRs1mjQ/lwO5M1nZgSNt3Krw61L9YOV+ahP7+F5FRJksW7Sgv5X
 /3DGm8eqsqVP8mNqZW55yp45uUVE4ZL98yibBLRJONW5/cKjUyGlnxy6Vy6OXDP4
 eXZzYct2nlIMNAbCjB49WoUxxbjg4eLPxSIGGLRdVJliYNOFXIgqEnsFCq7Zlare
 rLQc+TSl0pM+mWKjGchLxMxrA6D5F6ERjIwTukDEjkNQcsXNQkUGC0IKcUM0x7Rf
 N6+eMXBgWYIjgFLXju+B+dZgrDA0BdXs9oaok1idIxBgWqIQ3o4EyIk1sWIHcb/1
 8HL9XEd8oC3G1G4T3Ze++9sUd4MgA3ELOiCQapx7zh/gPDYaYr9yfr2WyRcoMcqK
 Dwlo9os2q0nfOmg6qcmyN5R0flGEDEtBB6/hj2v2mvj9qMA66kSfsMfkqSVbYSZg
 6Kt+ScmKYNpCZiFHX1yUygBHgexvWxxPqhm5eV4gd4/7cNWkCwM=
 =oTd7
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20201116' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- Clock fix MMC driver for SM1 based platforms
- sync SOC Ids from Linux 5.10-rc1
- fix potential build warning on meson_dw_hdmi and meson-g12a-usb2 phy
2020-11-16 10:50:32 -05:00
Tom Rini
e1fdb2045a Merge tag 'u-boot-rockchip-20201113' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- Fix USB support for rk3399 Pinebook Pro;
- Fix SPI boot for rk3399 boards other than Bob;
- Fix 32bit boards firmware build without SPL_OPTEE support;
- Fix rockchip display driver license;
2020-11-16 09:50:21 -05:00
Tom Rini
cd0d3749af Minor fixes/improvements to 'patman status'
-----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl+xNpwRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIreby6QgA3KcBm+Iwyzkx7wID7R6PVaazKdesyCM6
 Y4dE7kOrXFkCnoXmS5szhrc7YKpWWKBkzHDvRbW9a+n5gTgvujX1OufrcMlEwI9O
 9XqhCmBb2pJ1nfGVxO+qI0hkKI/AgbXw2RedfvJpe2cXkIrzcap/vpmW8S7ri34+
 K9dUxFUMzoUwnY/96asMMF9NgW8AFZ8TE+maUK+B/wXSllb+8FoE7VXKasDkyNer
 qH8YkccU5aeWXYOxv9othxQ1Z1tt/0LX14YfLPbXn0tJhHUfoVSrWTzmqWad8gd4
 1jgSTKkS65Pa/2UqC7apMuGsEexw72kWqewGQxZtCZNphlESWckWmQ==
 =Dheq
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-15nov20' of git://git.denx.de/u-boot-dm

Minor fixes/improvements to 'patman status'
2020-11-15 10:13:22 -05:00
Pali Rohár
914689a204 mtd: OneNAND: Set MTD type
onenand_probe() function is missing to set mtd->type. So set same type as
which sets onenand Linux kernel driver.

After this change 'mtd list' prints correct type instead of 'Unknown'.

Signed-off-by: Pali Rohár <pali@kernel.org>
2020-11-15 15:29:40 +05:30
Ivaylo Dimitrov
71c27dbaae Nokia RX-51: Make onenand working
set_gpmc_cs0() sets wrong timings and size for Nokia N900 onenand flash.
Fix that by setting the correct timings and size from the board code

Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Tested-by: Pali Rohár <pali@kernel.org>
2020-11-15 15:29:40 +05:30
Pali Rohár
56847f3a5e Nokia RX-51: Update test script
Include emmc/nand suffix into bootmenu script names and fix leaking sleep
processes when asynchronously waiting for them. 'wait -n' is not provided
by /bin/sh, so run script under bash.

Signed-off-by: Pali Rohár <pali@kernel.org>
2020-11-15 15:29:40 +05:30
Pali Rohár
b95ffd3051 Nokia RX-51: During init disable lp5523 led instead of resetting it
After commit d5243359e1 ("OMAP24xx I2C: Add support for set-speed")
U-Boot is unstable to reset lp5523 led. That commit added pooling for i2c
poll ARDY bit which apparently is never set. It is not known what is
happening here.

Purpose of resetting lp5523 led in Nokia RX-51 code is just to turn off
very bright led which is powered on by NOLO and expects next boot image
(kernel or U-Boot) to turn it off.

After testing we observed that just disabling lp5523 led is working fine.

So as a workaround to this ARDY bit i2c issue we disable lp5523 led instead
of resetting it.

Signed-off-by: Pali Rohár <pali@kernel.org>
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
2020-11-15 15:29:40 +05:30
Pali Rohár
94f69f4c14 Nokia RX-51: Fix crashing in U-Boot mmc function omap_hsmmc_stop_clock()
After commit 04a2ea248f ("mmc: disable UHS modes if Vcc cannot be
switched on and off") U-Boot started crashing on Nokia RX-51 while
initializing mmc and caused reboot loop.

It looks like that some clocks were not enabled and this patch fixes U-Boot
mmc crash.

Signed-off-by: Pali Rohár <pali@kernel.org>
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
2020-11-15 15:29:40 +05:30
Pali Rohár
e4f7592196 Nokia RX-51: Remove old comments from configs/nokia_rx51.h file
These comments are relict for old, now removed config options.
So remove these obsoleted comments too.

Signed-off-by: Pali Rohár <pali@kernel.org>
2020-11-15 15:29:40 +05:30
Roger Quadros
87c5bc80fc configs: am65/j72x: Set CONFIG_LOGLEVEL to 7
By default CONFIG_LOGLEVEL seems to be set to 4 which is
too low and doesn't show dev_info/dev_notice/dev_warn
messages on console. This has been deliberately set low
globally to be conservative setting across the board due to
primary bootloader size limitations. It is best to tune
per board config as per user needs.

On K3 we have separate SPL and u-boot configs so we
can afford to set u-boot CONFIG_LOGLEVEL to 7.

On AM65 this patch causes u-boot.img size to change from
932KB to 940KB with 1 line additional print during
MMC boot. i.e. details of Net subsystem

"Net: K3 CPSW: nuss_ver: 0x6BA00102 cpsw_ver: 0x6BA80102 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000"

Similar 8KB difference was seen on J721E.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
2020-11-15 15:29:19 +05:30
Pali Rohár
8d8c181703 Nokia RX-51: Convert to CONFIG_DM_I2C
Use twl4030_i2c_read(), i2c_get_chip_for_busnum() and remove
CONFIG_SYS_I2C.

Signed-off-by: Pali Rohár <pali@kernel.org>
2020-11-15 15:26:25 +05:30
Pali Rohár
4fcc084eeb power: twl4030: Add twl4030_i2c_read() function
Function twl4030_i2c_read() is like twl4030_i2c_read_u8() but instead of
single value it rather returns array of values.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-11-15 15:25:55 +05:30
Parthiban Nallathambi
a1337e3581 ARM: am335x: Add phyBOARD REGOR support
phyBOARD-REGOR is based on phyCORE AM335x R2 SoM (PCL060).

CPU  : AM335X-GP rev 2.1
Model: Phytec AM335x phyBOARD-REGOR
DRAM:  512 MiB
NAND:  512 MiB
MMC:   OMAP SD/MMC: 0
eth0: ethernet@4a100000

Working:
 - Eth0
 - i2C
 - MMC/SD
 - NAND
 - UART
 - USB (host)

Device trees were taken from Linux mainline:
commit c4d6fe731176 ("Linux 5.9.0")

Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-11-15 15:14:04 +05:30
Heinrich Schuchardt
a3e458524c cros_ec: Handling EC_CMD_GET_NEXT_EVENT
With commit 6900797678 ("cros_ec: Support keyboard scanning with
EC_CMD_GET_NEXT_EVENT") check_for_keys() tries to read keyboard
strokes using EC_CMD_GET_NEXT_EVENT. But the sandbox driver does
not understand this command. We need to reply with
-EC_RES_INVALID_COMMAND to force check_for_keys() to fall back to
use EC_CMD_MKBP_STATE. Currently the driver prints

    ** Unknown EC command 0x67

in this case. With the patch the message is suppressed.

In a future patch we should upgrade the sandbox driver to provide
EC_CMD_GET_NEXT_EVENT support.

Fixes: 6900797678 ("cros_ec: Support keyboard scanning with EC_CMD_GET_NEXT_EVENT")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-11-14 15:23:41 -07:00
Simon Glass
4cb862fe28 cros_ec: Increase command timeout for flash erase
Erasing the flash can take over a second on some devices and the EC is
not responsive during this time. Update the timeout to 5 seconds to cope
with this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-11-14 15:23:41 -07:00
Simon Glass
d237e9c7c0 cros_ec: Correct collection of EC hash
The EC now requires that the offset field be set correctly when checking
on hash status. Update the code to handle this. Use the same message
struct in both functions to reduce stack space.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-11-14 15:23:41 -07:00
Simon Glass
fcbec650e6 patman: Add a Series-patchwork-url option
Add a commit tag to allow the Patchwork URL to be specified in a commit.
This can be handy for when you submit code to multiple projects but don't
want to use the -p option.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-11-14 15:23:41 -07:00
Simon Glass
a55be354c0 patman: Add a setting for the Patchwork URL
Add an argument to allow specifying the the patchwork URL. This also adds
this feature to the settings file, either globally, or on a per-project
basis.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-11-14 15:23:41 -07:00
Simon Glass
7cbf02e94d patman: Allow specifying the patchwork URL
Add a new argument to allow the URL of the patchwork server to be
speciified. For now this is hard-coded in the main file, but future
patches will move it to the settings file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-11-14 15:23:41 -07:00
Simon Glass
3145b63513 patman: Update defaults in subparsers
At present values from the settings file are only applied to the main
parser. With the new parser structure this means that some settings are
ignored.

Update the implementation to set defaults across the main parser and all
subparsers. Also fix up the comments, since ArgumentParser is being used
now.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-11-14 15:23:41 -07:00
Simon Glass
53336e6ca8 patman: Correct Change-Ids error message args
The arguments of this error are incorrectly formatted. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-11-14 15:23:41 -07:00
Simon Glass
4600767d29 patman: Refactor how the default subcommand works
At present patman tries to assume a default subcommand of 'send', to
maintain backwards compatibility. However it does not cope with
arguments added to the default command, so for example 'patman -t'
does not work.

Update the logic to handle this. Also update the CC command to use 'send'
explicitly, since otherwise patman gets confused with the patch-filename
argument.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-11-14 15:23:41 -07:00
Tom Rini
de865f7ee1 Pull request for UEFI sub-system for efi-2021-01-rc3
A part of the EFI_TCG2_PROTOCOL is implemented.
 A unit test is supplied.
 
 The following bugs are fixed:
 
 * incorrect buffer size in efi_file_setinfo() leading to creash in SCT
 * a crash in UEFI selftest on the sandbox due to removed drivers
 * missing newlines in log message for the UEFI RNG driver
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl+vWMQACgkQxIHbvCwF
 GsQoQA//fDPn/qWP3zQw/jWecZLNs3AexDKQIEmn4T/1b179N1v5B8y6axD/Km0Q
 MNHdYQIy3GEYS1E1fre28tsgqWnY7tlGi5oeYw9v4QT0ahMzuuzIrsq7J7UhNAgo
 4nXXQuL9GvQvObO786VFDmekndAaehfgqoZjC1qwn6d8CvQYQex9Wor966Y0OQ4z
 RsWVirWoIkBlC+02bAtCFWFmyPgHYilNACC2EZlxRGcTmYWObvLQMAko4reRJ08Y
 IJbR2glqmrgWkkEe7PpU/lz9r1IvWTSDFIlG8HgQ7HqScQXDqmXyDARuj4T/DxuT
 /VfyNwxD5+aHCyZtxcgQ82RvP+trNkgvz9wuUbmg3IBOQ7wFPtk/g9243ySKalM5
 U3PmdaG6K/XaZ5UDnpK08FvGU85/9LQJOnGnHSUTfjaDgYBeV0QUYGzFFeyn2hW9
 TFdzBjl2KJv2I19fCmCrGD+jGtuRqUqDeeY3UCBv3T9ioXeV2Jg+eziASAejDEZQ
 w757nxqI5upSlo/uX8l9yybvlMlEXoyj6w7THxqZKItuiwWcE69aV6HNUHKLMpoD
 AsFr6/9y4duqaoYWzGIsjcEGjCzGhFAybrlVqN1MrfE77jCk9WEePFw452+Tjhp0
 ch4eIUoh0unZZcamcPBo+JLngKgYW0HS6OKXh0PWMucGLn7XW8g=
 =/DST
 -----END PGP SIGNATURE-----

Merge tag 'efi-2021-01-rc3' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for efi-2021-01-rc3

A part of the EFI_TCG2_PROTOCOL is implemented.
A unit test is supplied.

The following bugs are fixed:

* incorrect buffer size in efi_file_setinfo() leading to creash in SCT
* a crash in UEFI selftest on the sandbox due to removed drivers
* missing newlines in log message for the UEFI RNG driver
2020-11-14 09:47:33 -05:00
Heinrich Schuchardt
af69267c32 efi_selftest: provide unit test for the EFI_TCG2_PROTOCOL
Provide a minimal test for the EFI_TCG2_PROTOCOL.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-11-14 05:05:46 +01:00
Ilias Apalodimas
c1c021052c efi_loader: Add basic EFI_TCG2_PROTOCOL support
Since U-boot EFI implementation is getting richer it makes sense to
add support for EFI_TCG2_PROTOCOL taking advantage of any hardware TPM
available on the device.

This is the initial implementation of the protocol which only adds
support for GetCapability(). It's limited in the newer and safer
TPMv2 devices.

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-11-14 05:05:46 +01:00
Ilias Apalodimas
915e3ae568 tpm: Add some headers from the spec
A following patch introduces EFI_TCG2_PROTOCOL.
Add the required TPMv2 headers to support it.

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-11-14 05:05:46 +01:00
Heinrich Schuchardt
792aee1150 efi_loader: incorrect buffer size in efi_file_setinfo()
When copying a string with must allocate a byte for the terminating '\0' in
the target buffer.

Fixes: fbe4c7df00 ("efi_loader: enable file SetInfo()")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-11-14 05:05:46 +01:00
Paulo Alcantara
337c97d935 efi_loader: Add missing newline to log_{err,warning}
Add missing newline to log messages in efi_rng_register() otherwise
something like below would be shown

	Scanning disk virtio-blk#31...
	Found 2 disks
	Missing RNG device for EFI_RNG_PROTOCOLNo EFI system partition

Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-11-14 05:05:46 +01:00
Heinrich Schuchardt
fccd3d9c42 efi_selftest: keep devices in ExitBootServices()
When calling ExitBootServices during out unit tests we should not detach
devices as we need console output for runtime tests.

Fixes: 529441ca89 ("efi_loader: Disable devices before handing over control")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-11-14 05:05:46 +01:00
Peter Robinson
b197c934b1 rockchip: Pinebook Pro: Fix USB
Improve USB config so keyboard and USB-A ports work.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2020-11-13 18:17:57 +08:00
Kever Yang
7a9c574cf1 rockchip: Enable BINMAN for boards enable SPL_OPTEE
Rockchip has many 32bit SoCs and some of them are support SPL_OPTEE now,
only boards with SPL_OPTEE support can fit BINMAN well, other boards
will fail at initr_binman() in U-Boot proper after below patch,
eg. rv1108 board.
    83187546ae binman: Support multiple images in the library

Fixes: 79030a4861 ("rockchip: Add Single boot image (with binman, pad_cat)")
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-11-13 18:17:09 +08:00
Hugh Cole-Baker
c180e2939d rockchip: rockpro64: fix boot from SPI flash on spi1
Commit c4cea2bbf9 ("rockchip: Enable building a SPI ROM image on bob")
added an alias spi1 referring to spi@ff1d0000, however there was already
an alias spi0 referring to the same node in rockpro64's u-boot.dtsi, and
having both aliases present broke booting from SPI flash for this board.

Remove the spi0 alias, set the default bus for SPI flash to 1, and
enable support for numbered aliases in SPL so that it uses the same bus
numbering as U-Boot proper. This fixes booting from U-Boot in SPI flash
on the rockpro64 board.

Signed-off-by: Hugh Cole-Baker <sigmaris@gmail.com>
Suggested-by: Simon Glass <sjg@chromium.org>
Fixes: c4cea2bbf9 ("rockchip: Enable building a SPI ROM image on bob")
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-11-13 18:16:39 +08:00
Alper Nebi Yasak
a355ece8e6 video: rockchip: Restrict EDP, VOP, MIPI files to GPL-2.0
These files have a lot of code in common with their counterparts in
coreboot, especially in their earlier revisions:

                  U-Boot                  |                  coreboot
    --------------------------------------|--------------------------------------------
    drivers/video/rockchip/:              | src/soc/rockchip/:
    - rk_edp.c          (GPL-2.0+)        | - common/edp.c          (GPL-2.0-only)
       "                                  | - rk3288/display.c      (GPL-2.0-only)
       "                                  | - rk3399/display.c      (GPL-2.0-only)
    - rk_hdmi.h         (GPL-2.0+)        | (none)
    - rk_hdmi.c         (GPL-2.0+)        | - rk3288/hdmi.c         (GPL-2.0-or-later)
    - rk3288_hdmi.c     (GPL-2.0+)        | - rk3288/hdmi.c         (GPL-2.0-or-later)
    - rk3399_hdmi.c     (GPL-2.0+)        | (none)
    - rk_mipi.h         (GPL-2.0+)        | (none)
    - rk_mipi.c         (GPL-2.0+)        | - rk3399/mipi.c         (GPL-2.0-only)
    - rk3288_mipi.c     (GPL-2.0+)        | - rk3399/mipi.c         (GPL-2.0-only)
    - rk3399_mipi.c     (GPL-2.0+)        | - rk3399/mipi.c         (GPL-2.0-only)
    - rk_lvds.c         (GPL-2.0+)        | (none)
    - rk_vop.h          (GPL-2.0+)        | (none)
    - rk_vop.c          (GPL-2.0+)        | - common/vop.c          (GPL-2.0-only)
    - rk3288_vop.c      (GPL-2.0+)        | - common/vop.c          (GPL-2.0-only)
    - rk3399_vop.c      (GPL-2.0+)        | (none)
                                          |
    arch/arm/include/asm/arch-rockchip/:  | src/soc/rockchip/*/include/soc/*:
    - edp_rk3288.h      (GPL-2.0+)        | - common/.../edp.h      (GPL-2.0-only)
       "                                  | - rk3288/.../display.h  (GPL-2.0-only)
       "                                  | - rk3399/.../display.h  (GPL-2.0-only)
    - vop_rk3288.h      (GPL-2.0+)        | - common/.../vop.h      (GPL-2.0-only)

Restrict the licenses to match coreboot's so that changes from coreboot
can be imported to U-Boot as necessary. HDMI files are already 2.0+
there and rk_lvds.c has no counterpart, so keep them as is.

Cc: Simon Glass <sjg@chromium.org>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Cc: Eric Gao <eric.gao@rock-chips.com>
Cc: Jacob Chen <jacob-chen@iotwrt.com>
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-11-13 18:16:11 +08:00
Alper Nebi Yasak
13634bb658 rockchip: gru: Allow setting up clocks in U-Boot proper
Commit fe97471632 ("rockchip: rk3288: Allow setting up clocks in
U-Boot proper") fixes some clock issues when chainloading U-Boot on
rk3288 chromebooks. Part of that change is still available in veyron's
board_early_init_r() function. Since chain-loading U-Boot proper from
vendor firmware is possible on gru boards as well, do the same thing for
them too.

On rk3399, this needs to detect whether SPL was run via handoff, so
enable that and bloblist kconfigs it needs for chromebook_bob.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-11-13 18:15:08 +08:00
Alper Nebi Yasak
eb89025013 rockchip: rk3399: Init clocks in U-Boot proper if SPL was not run
It's possible to chainload U-Boot proper from the vendor firmware in
rk3399 chromebooks, but the way the vendor firmware sets up clocks is
somehow different than what U-Boot expects. This causes the display to
stay devoid of content even though vidconsole claims to work (with
patches in process of being upstreamed).

This is meant to be a rk3399 version of commit d3cb46aa8c ("rockchip:
Init clocks again when chain-loading") which can detect the discrepancy,
but this patch instead checks whether SPL (and therefore the clock init)
was run via the handoff functionality and runs the init if it was not.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-11-13 18:15:08 +08:00
Neil Armstrong
c87eab8161 ARM: dts: meson-sm1: add u-boot specific MMC controller compatible
In order to enable the Amlogic SM1 MMC controller fix, we need to add a u-boot specific
MMC controller compatible.

This adds a new meson-sm1-u-boot.dtsi and reworks the other -u-boot.dtsi
to use this for SM1 based boards.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-11-12 14:31:29 +01:00
Neil Armstrong
0dbb54eb32 mmc: meson-gx: change clock phase value on SM1 SoCs
Amlogic SM1 SoCs doesn't work over 50MHz. When phase sets to 270', it's
working fine over 50MHz on Amlogic SM1 SoCs.
Since Other Amlogic SoCs doens't report an issue, phase value is using
to 180' by default.

To distinguish which value is used adds an u-boot only sm1 compatible.

In future, it needs to find what value is a proper about each SoCs.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
2020-11-12 14:31:29 +01:00
Neil Armstrong
77863d43eb mmc: meson-gx: move arch header to local header
Move the asm/arch-meson/sd_emmc.h to a local meson_gx_mmc.h,
remove the useless if/then and fix the meson_gx_mmc.c include.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-11-12 14:31:29 +01:00
Neil Armstrong
b6a71e26c9 ARM: mach-meson: update SoC IDs
Update From Linux commits
- 240051cb833b ("soc: amlogic: meson-gx-socinfo: Add A1 and A113L IDs")
- 1d7c541b8a5b ("soc: amlogic: meson-gx-socinfo: Add S905X3 ID for VIM3L")
- fdfc6997bd08 ("soc: amlogic: meson-gx-socinfo: Fix S905D3 ID for VIM3L")
- d16d0481e6ba ("soc: amlogic: meson-gx-socinfo: Fix S905X3 and S905D3 ID's")

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-11-12 14:28:37 +01:00
Jaehoon Chung
fe76c4207e video: meson: meson_dw_hdmi: fix the potential build warning
Fix the potential build warning.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-11-12 14:27:38 +01:00
Jaehoon Chung
85c9a7ba8c phy: meson-g12a-usb2: fix the potential build warning
Fix the potential build warning.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-11-12 14:27:38 +01:00
Andre Przywara
832bfad745 libfdt: Fix signedness comparison warnings
This is a combination of upstream libfdt commits to fix warnings about
comparing signed and unsigned integers:
==========
scripts/dtc/libfdt/fdt.c: In function ‘fdt_offset_ptr’:
scripts/dtc/libfdt/fdt.c:137:18: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
   if ((absoffset < offset)
...
==========

For a detailed description of the fixes, see the dtc repo:
https://git.kernel.org/pub/scm/utils/dtc/dtc.git/log/?id=73e0f143b73d808

For this patch the commits between 73e0f143b73d8088 and ca19c3db2bf62000
have been combined and adjusted for the slight differences in U-Boot's
libfdt code base.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2020-11-10 14:31:08 -05:00
Tom Rini
f36603c7a8 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86
- Avoid using hardcoded number of variable range MTRRs in mtrr_commit()
- coral: Correct max98357 file
- coral: Update smbios tables to latest definition
2020-11-09 23:00:06 -05:00
Simon Glass
ca010674ed x86: coral: Update smbios tables to latest definition
The accepted binding uses multiple nodes, one for each table type. Update
coral accordingly.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-10 09:44:20 +08:00
Simon Glass
6486eaa024 x86: coral: Correct max98357 file
This somehow ended up as an empty file. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-10 09:35:57 +08:00
Bin Meng
f72d3d6b04 x86: Avoid using hardcoded number of variable range MTRRs in mtrr_commit()
Since commit 29d2d64ed5 ("x86: Add support for more than 8 MTRRs"),
the maximum number of variable range MTRRs was increased from 8 to 10.
On the BayTrail platform there are only 8 variable range MTRRs. In
mtrr_commit() it still uses MTRR_MAX_COUNT which caused a #GP during
VESA video driver probe. It should have been updated to use dynamically
probed number.

This fixes the boot failure seen on Intel Minnow Max board.

Fixes: 29d2d64ed5 ("x86: Add support for more than 8 MTRRs")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-11-10 09:25:25 +08:00
Tom Rini
1ae955e3a5 Prepare v2021.01-rc2
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-11-09 17:20:05 -05:00
Tom Rini
b3f4873438 Pull request for UEFI sub-system for efi-2021-01-rc2 (2)
The following bugs are fixed:
 
 * The conitrace command failed to build.
 * Non-volatile UEFI variables were not delete form the file store.
 
 The following features are added:
 
 * Support for the FN1 - FN10 keys on crosswire keyboards is added.
 * An EFI binary is provided to dump the binary device tree.
 
 tpm2_get_capability() is adjusted in preparation of the implementation
 of the EFI_TCG2_PROTOCOL.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl+pjmQACgkQxIHbvCwF
 GsQcFQ//SZHg3KwGTBrVnosLG98phzwT9igkwOJMUjdkfPRCtdLTdHBlJV4KZ3dU
 GaIJtMP7vtbdCMBgRJngUBch01BSzp4/ZGOzRLRfhINAztV+ZNnHhKChlEEn5jzr
 dMIh24+/fanEOABhK7AxwmQOqTLFURQrrKPW3U7zCViSu6W9mH5AtFBQl2deL4pT
 d4rUGz4xIUZeJGPjOLy3Zx8Mjev2nXC/yqfBudyFW29X87nbU+7JX4Ze1glyKplO
 ImDx2V7e2nNjy25eBAcN/cNieV/5UpiBrto1KHsL8MILw3vDz68NG2x3kNAekUFp
 mUTGy/BwrVauNHexKQl2w42mrI+cCZaTPt2tbIWKg/CgXR2QjldlZ0k7evlqdcwO
 QR8xVTYlfnlwF0e826fwCGdc8i/VQWhFLL43bQhmh7Xw8myTcFySu3s3NuZ+0ABf
 Qaf4ju1lcCrP5GseCypniY4yIqNXlG5U4ZEOcngtHtWlA2dS6Ozn4DOS4koe5ZnF
 imwcKG/6oYRfMpQrgoKQa8RlqZIm1PDiSNPCUhtUMIKXyLTL05OgAaWoLcSOrzKu
 dQBDeTtb6JmNR9839Ft6mHR1I0FQuAqIpd7ne656A1pcRaX/yXNEaCiGA+ssmOs+
 3isXr1a+OPX2zCpKJwllUooTFznjO44MlJl3+k3rbKkbRFQdiYI=
 =swsS
 -----END PGP SIGNATURE-----

Merge tag 'efi-2021-01-rc2-2' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for efi-2021-01-rc2 (2)

The following bugs are fixed:

* The conitrace command failed to build.
* Non-volatile UEFI variables were not delete form the file store.

The following features are added:

* Support for the FN1 - FN10 keys on crosswire keyboards is added.
* An EFI binary is provided to dump the binary device tree.

tpm2_get_capability() is adjusted in preparation of the implementation
of the EFI_TCG2_PROTOCOL.
2020-11-09 15:48:50 -05:00