Commit Graph

8306 Commits

Author SHA1 Message Date
Wolfgang Denk
70ebf31633 AT91: factor out ROUND() macro
A large number of boards (all AT91 based) duplicated the ROUND()
macro in their board specific config files. Add the definition to
include/common.h and clean up the board config files.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-22 09:30:31 +02:00
Peter Tyser
d4abc757c2 Move api_examples to examples/api
Also add a rule to remove demo.bin which was previously leftover
after a "make clean"

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-07-21 09:23:36 +02:00
Heiko Schocher
af1d7d984a 83xx, kmeter: fix compile error
CONFIG_SYS_MALLOC_LEN is defined in the board config, and
the keymile-common.h, which collects common options used
by all keymile-boards. This results in a compile error
when compiling the kmeter1 board. So remove this define
in the board config file.

Signed-off-by: Heiko Schocher <hs@denx.de>
2009-07-21 09:22:23 +02:00
Peter Tyser
1bc1538613 Move examples/ to examples/standalone
The current files in examples are all standalone application examples,
so put them in their own subdirectory for organizational purposes

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-07-21 00:13:21 +02:00
Peter Tyser
b220c64d86 Move architecture specific config.mk files into subdirs
This cleans up U-Boot's toplevel directory a bit and makes the
architecture 'config.mk' file naming and location similar to board
and cpu 'config.mk' files

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-07-21 00:12:35 +02:00
Po-Yu Chuang
082becd0d5 Add "tags" to .gitignore file.
Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-21 00:10:21 +02:00
Heiko Schocher
dc71b248ef powerpc: updates for the keymile boards
- CONFIG_SYS_MAX_I2C_BUS changed to 1
  We use only one I2C hardwarecontroller on this boards, so
  change the CONFIG_SYS_MAX_I2C_BUS to 1.
- common: dont print errormsg if second IVM Block lacks.
- 82xx, mgcoge: fix double mtdpart entry in environment
- 82xx, mgcoge: activate on second Flash the second bank.
- common: CONFIG_ENV_SIZE 0x4000 for all keymile boards
- common: Change malloc size to 1MByte for all Keymile boards
    We need a bigger malloc area for the environment support (128k)
    on some Keymile boards (kmeter1) and the upcoming UBI support.
    Change it to 1MB for all Keymile boards to be on the save side.
    Also define CONFIG_SYS_64BIT_VSPRINTF which is needed for
    UBI/UBIFS support.
- Add UBI support to all Keymile boards
- change manner of writing "/localbus/ranges" node
    instead of writting the complete "/localbus/ranges" node
    before booting Linux, only update the ranges entries
    which gets dynamical detected (size of flashes).
    This is needed, because keymile adds in the DTS
    "/localbus/ranges" node entries, which u-boot must
    not overwrite/delete.
- kmeter, mgcoge: define 2 seperate regions needed for the Intel P30 chips
    The Intel P30 chip has 2 non-identical chips on
    one die, so we need to define 2 seperate regions
    that are scanned by physmap_of independantly.
- kmeter1: Add MTD concat support to Keymile boards
- 82xx, mgcoge: add "unlock=yes" to default environment
- added CONFIG_MTD_DEVICE to get in sync with mainline code

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-07-21 00:06:11 +02:00
galak
f14d81050a fsl_sata: Fix compiler warnings shown by gcc-4.4
Update fsl_sata to use common structures instead of casting
back and forth between the fsl specific ones and the common ones
(which are identical).

fsl_sata.c: In function 'scan_sata':
fsl_sata.c:550: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
fsl_sata.c:549: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
fsl_sata.c:548: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
fsl_sata.c:545: note: initialized from here
fsl_sata.c:592: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
fsl_sata.c:590: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
fsl_sata.c:588: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
fsl_sata.c:586: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
fsl_sata.c:579: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
...

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-20 23:54:58 +02:00
Simon Kagstrom
20938e54a2 Add unaligned.h for arm
This patch adds unaligned.h for ARM (needed to build with LZO
compression). The file is taken from the linux kernel, but includes
u-boot headers instead.

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Acked-by: Stefan Roese <sr@denx.de>
2009-07-20 23:54:58 +02:00
Peter Tyser
433ea8abd6 Remove last remanants of unused CONFIG_I2C_CMD_TREE
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-07-20 23:54:57 +02:00
Andrzej Wolski
f6ca3b7094 ubi: help message correction
Fix incorrect information about size units and correct typo.

Signed-off-by: Andrzej Wolski <awolski@poczta.fm>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-07-20 23:54:57 +02:00
Wolfgang Denk
725e53a70d Merge branch 'master' of git://git.denx.de/u-boot-blackfin 2009-07-20 22:55:29 +02:00
Wolfgang Denk
23b5b1d3e1 Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx 2009-07-20 22:52:31 +02:00
Ilya Yanok
b86b85e261 mmc: set bus width to 1 and clock to minimum early during initialization
We need to switch back to 1-bit before initialization or SD 2.0 cards
will fail to send SCR if we've switched to 4-bit already.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2009-07-19 22:07:29 +02:00
Shinya Kuribayashi
cff80f2cd1 config.mk: Remove unused HPATH
This variable is not unused anywhere.

Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
2009-07-19 21:50:59 +02:00
Grzegorz Bernacki
a781de1270 digsy mtc: Enable command line history.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
2009-07-19 21:43:00 +02:00
Mike Frysinger
3756609076 compiler.h: unify system ifdef cruft here
Shove a lot of the HOSTCC and related #ifdef checking crap into the new
compiler.h header so that we can keep all other headers nice and clean.

Also introduce custom uswap functions so we don't have to rely on the non
standard implementations that a host may (or may not in the case of OS X)
provide.  This allows mkimage to finally build cleanly on an OS X system.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-19 21:41:46 +02:00
Kim Phillips
2a2ed845c0 common: fix 'dummy' is used uninitialized in this function warning
fix this gcc 4.4 warning:

xyzModem.c: In function 'xyzModem_stream_open':
xyzModem.c:564: warning: 'dummy' is used uninitialized in this function

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-07-19 21:37:02 +02:00
Mike Frysinger
1ea6bcd859 push CROSS_COMPILE out to $(ARCH)_config.mk
Each arch should handle setting a proper default CROSS_COMPILE value in
their own config.mk file rather than having to maintain a large ugly list
in the Makefile.  By using conditional assignment, we don't have to worry
about the variable already being set (env/cmdline/etc...).

The common config.mk file takes care of exporting CROSS_COMPILE already,
and while a few variables (toolchain ones) utilize CROSS_COMPILE before
including the arch config.mk, they do so with deferred assignment.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-19 21:36:11 +02:00
Jean-Christophe PLAGNIOL-VILLARD
60a3f404ac malloc.h: protect it against multiple include
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-07-19 21:34:45 +02:00
Wolfgang Denk
7640f41988 Fix boards broken after removal of legacy NAND and DoC support
Commit 2419169f removed support for legacy NAND and disk on chip but
missed to update the code for a few boards. This patch fixes the
resulting build issues.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-19 19:37:24 +02:00
Wolfgang Denk
1a4664b53a cmd_flash.c: fix fix compile error for boards with DataFlash
Commit 5669ed45 ("cmd_flash.c: fix warning: unused variable
'addr_first'/'addr_last'") changed the #ifdef logic areound the
declaration of these variables and missed a combination of settings
of HAS_DATAFLASH with SYS_NO_FLASH; this patch fixes this.

Also spotted by Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-19 19:36:14 +02:00
Wolfgang Denk
341245a288 pcm030: fix out-of-tree building
Commit 0a87dd90 that was supposed to fix out-of-tree building for the
pcm030 board was unfortunately incomplete.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-19 12:08:06 +02:00
Kazuaki Ichinohe
e405afab1d Canyonlands SATA harddisk driver
This patch adds a SATA harddisk driver for the canyonlands.
This patch is kernel driver's porting.
This patch corresponded to not cmd_scsi but cmd_sata.
This patch divided an unused member with ifndef __U_BOOT__ in the structure.

[environment variable, boot script]
setenv bootargs root=/dev/sda7 rw
setenv bootargs ${bootargs} console=ttyS0,115200
ext2load sata 0:2 0x400000 /canyonlands/uImage
ext2load sata 0:2 0x800000 /canyonlands/canyonlands.dtb
fdt addr 0x800000 0x4000
bootm 0x400000 - 0x800000

If you drive SATA-2 disk on Canyonlands, you must change parts from
PI2PCIE212 to PI2PCIE2212 on U25. We confirmed to boot by using
following disks:

1.Vendor: Fujitsu	 Type: MHW2040BS
2.Vendor: Fujitsu	 Type: MHW2060BK
3.Vendor: HAGIWARA SYS-COM:HFD25S-032GT
4.Vendor: WesternDigital Type: WD3200BJKT (CONFIG_LBA48 required)
5.Vendor: WesternDigital Type: WD3200BEVT (CONFIG_LBA48 required)
6.Vendor: Hitachi	 Type: HTS543232L9A300 (CONFIG_LBA48 required)
7.Vendor: Seagate	 Type: ST31000333AS (CONFIG_LBA48 required)
8.Vendor: Transcend	 Type: TS32GSSD25S-M
9.Vendor: MTRON		 Type: MSD-SATA1525-016

Signed-off-by: Kazuaki Ichinohe <kazuichi at fsi.co.jp>
2009-07-19 11:24:09 +02:00
Reinhard Arlt
52a0e2dee9 Add support for the Tundra TSI148 VME-bridge
From: Reinhard Arlt <reinhard.arlt@esd-electronics.com>

This patch adds support for the Tundra TSI148 VME-bridge. It's used on
the upcoming esd VME8349 board.

Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-07-19 11:21:08 +02:00
Mike Frysinger
8d1fea2c40 Blackfin: bf537-{minotaur,srv1}: do not hardcode CONFIG_ETHADDR
MAC addresses should not be hardcoded in boards to avoid random link level
conflicts.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-18 21:16:08 -04:00
Mike Frysinger
baf3570503 Blackfin: bf533-stamp: back down SCLK a bit
While the 1.0 and 1.2 spin of the bf533-stamp boards can handle the higher
SCLK speeds just fine, the 1.1 spin cannot due to the bugs introduced with
the shortened SDRAM traces.  So lower the SCLK speed down to a value that
all three can handle.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-18 21:16:01 -04:00
Mike Frysinger
490fe73491 Blackfin: split cpu COBJS into multilines
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-18 21:15:54 -04:00
Mike Frysinger
909878fd3f Blackfin: add os log functions
Part of the mini Blackfin ABI with operating systems is that they can use
0x4f0-0x4f8 to pass log buffers to/from bootloaders.  So add support to
U-Boot for reading the log buffer.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-18 21:15:50 -04:00
Kim Phillips
9993e196da mpc83xx: convert all remaining boards over to 83XX_GENERIC_PCI
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-07-18 19:43:04 -05:00
Wolfgang Denk
d39041fcad PATI board: fix compiler warnings
Fix these:
pati.c: In function 'checkboard':
pati.c:358: warning: pointer targets in passing argument 2 of 'getenv_r' differ in signedness
../common/flash.c: In function 'write_word':
../common/flash.c:824: warning: dereferencing type-punned pointer will break strict-aliasing rules
cmd_pati.c: In function 'do_pati':
cmd_pati.c:279: warning: 'value' may be used uninitialized in this function

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-19 01:15:52 +02:00
Jean-Christophe PLAGNIOL-VILLARD
28c345042e mpl: printing current stdio devices cleanup
Currently the mpl boards duplicate the code to print the current
devices from common/console.c; use stdio_print_current_devices()
instead

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Edited commit message.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-19 01:05:51 +02:00
Jean-Christophe PLAGNIOL-VILLARD
7e3be7cf3b console: unify printing current devices
Create stdio_print_current_devices() for this purpose

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-07-19 01:02:46 +02:00
Wolfgang Denk
a694610d33 Merge branch 'master' of git://git.denx.de/u-boot-nand-flash 2009-07-19 00:38:23 +02:00
Wolfgang Denk
5669ed4557 cmd_flash.c: fix warning: unused variable 'addr_first'/'addr_last'
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18 23:18:14 +02:00
Tom Rix
6bb6e6c75e OMAP3 Fix compiler warning for v7_flush_dcache_all
On build of omap3 targets in MAKEALL, the *.ERR files have

cpu.c: In function 'cleanup_before_linux':
cpu.c:64: warning: implicit declaration of function 'v7_flush_dcache_all'
cpu.c:64: warning: implicit declaration of function 'get_device_type

The functions v7_flush_dcache_all and get_device_type are declared
in include/asm-arm/arch-omap3/sys_proto.h, so use this file to
declare the functions.

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-07-18 22:36:32 +02:00
Wolfgang Denk
dba107b967 ARM: make split_by_variant.sh output more useful
The board/armltd/integrator/split_by_variant.sh script used to print
"Configuring for integrator*p board..." no matter which board name
was being compiled. This made it difficult to match MAKEALL output to
board names. This patch fixes this.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18 22:09:38 +02:00
Wolfgang Denk
2eb99ca802 NAND: Part 2: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
Commit 8d2effea added a warning for configurations that use NAND
without defining the (then necessary) CONFIG_SYS_64BIT_VSPRINTF but
failed to fix the affected boards.

This patch covers the non-PPC boards that were missed in the previous
patch (commit 170c1972).

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18 21:56:15 +02:00
Wolfgang Denk
7024aa14df at91cap9adk: fix #ifdef/#endif pairing
The #ifdef/#endif pairing in this file was obviously messed up.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18 20:46:38 +02:00
Wolfgang Denk
0a87dd90a7 pcm030: fix out-of-tree building
Commit c9969947, which added support for the pcm030 board
(aka phyCORE-MPC5200B-tiny), broke out-of-tree building.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18 18:00:25 +02:00
Wolfgang Denk
9ff59601c7 MPC837XERDB: fix warning: "CONFIG_SYS_MONITOR_LEN" redefined
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18 16:36:11 +02:00
Wolfgang Denk
2b5243fc24 8xxx: fix warning: implicit declaration of function 'uec_standard_init'
Commit 8e55258f created function uec_standard_init() to initialize
all UEC interfaces for 83xx and 85xx but failed to provide a
prototype for it.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18 16:13:18 +02:00
Wolfgang Denk
5b54df2674 MIP405T: fix compile problem
The "stdio/device: rework function naming convention" patch
(commit 52cb4d4f) broke the MIP405T board; this patch fixes it.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18 15:46:02 +02:00
Wolfgang Denk
170c19725e NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
Commit 8d2effea added a warning for configurations that use NAND
without defining the (then necessary) CONFIG_SYS_64BIT_VSPRINTF but
failed to fix the affected boards.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18 15:32:10 +02:00
Wolfgang Denk
6e897a661f CPCI750: fix compile problem
Commit bc0d3296 removed ppc_error_no.h from Marvell boards
but forgot to update board/esd/cpci750/mv_eth.h

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18 15:05:44 +02:00
Wolfgang Denk
462b103873 Merge branch 'master' of /home/wd/git/u-boot/custodians 2009-07-18 14:59:40 +02:00
Wolfgang Denk
0f1b3a2424 Merge branch 'master' of git://git.denx.de/u-boot-i2c 2009-07-18 14:59:05 +02:00
Alessandro Rubini
6aee304834 cmd_i2c: bugfix: add missing brace
The sub-command parser missed a brace, so "return 0;" is always
taken and no error message is diplayed if you say "i2c scan"
instead of "i2c probe", for example.

Proper brace is added. Also, a misleading and unneeded else
is removed.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com.it>
2009-07-18 10:17:53 +02:00
Jean-Christophe PLAGNIOL-VILLARD
52cb4d4fb3 stdio/device: rework function naming convention
So far the console API uses the following naming convention:

	======Extract======
	typedef struct device_t;

	int	device_register (device_t * dev);
	int	devices_init (void);
	int	device_deregister(char *devname);
	struct list_head* device_get_list(void);
	device_t* device_get_by_name(char* name);
	device_t* device_clone(device_t *dev);
	=======

which is too generic and confusing.

Instead of using device_XX and device_t we change this
into stdio_XX and stdio_dev

This will also allow to add later a generic device mechanism in order
to have support for multiple devices and driver instances.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Edited commit message.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18 00:27:46 +02:00
Peter Tyser
f732a7598f ppc: Fix compile error for boards with CONFIG_DDR_ECC
A bug was introduced by commit e94e460c6e
which affected non-MPC83xx/85xx/86xx ppc boards which had CONFIG_DDR_ECC
defined and resulted in errors such as:

Configuring for canyonlands board...
fsl_dma.c:50:2: error: #error "Freescale DMA engine not supported on your
processor"
make[1]: *** No rule to make target `.depend', needed by `libdma.a'.  Stop.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-07-17 23:44:42 +02:00