Commit Graph

308 Commits

Author SHA1 Message Date
Tom Rini
040b2583c3 Merge branch 'master' of git://git.denx.de/u-boot-sh 2018-06-02 16:58:27 -04:00
Álvaro Fernández Rojas
2902997b8b clk: bcm6345: convert to use live dt
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-06-01 15:56:02 +02:00
Marek Vasut
0d218efe2b clk: renesas: Add R8A77990 E3 clock tables
Add clock tables for R8A77990 E3 SoC .

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-01 09:47:01 +02:00
Marek Vasut
716d775286 clk: renesas: Add PE clock handling
The PE clock have two parents, add support for picking the correct
one and deriving the clock from it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-01 09:42:13 +02:00
Marek Vasut
f0f1de75c9 clk: renesas: Add PLL1 and PLL3 dividers
Add and use the PLL1 and PLL3 dividers.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-01 09:42:13 +02:00
Marek Vasut
8376e0e6f7 clk: renesas: Pass clock rate around as 64bit number internally
The PLL rate could be in the GHz range, which could overflow a 32bit
data type. Since the hardware is 64bit anyway, pass the clock rates
as 64bit number internally to avoid this.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-01 09:42:13 +02:00
Marek Vasut
15e0918285 clk: renesas: Fix swapped arguments in debug message
The mul and div arguments were reported in reverse order in the debug
message, swap them to fix this.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-01 09:42:13 +02:00
Eugen Hristev
649aa6cfe8 clk: at91: clk-h32mx: replace dm_warn with dev_dbg
dm_warn is too noisy, replace with dev_dbg for less noise.

Based on original work by Wenyou Yang

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-05-23 17:30:03 -04:00
Jonathan Gray
ed1030e152 rockchip: clk: rk3288: handle clk_enable requests for GMAC
Since b0ba1e7e9d
(rockchip: clk: rk3288: add clk_enable function and support USB HOST0/HSIC)
Ethernet no longer probes on RK3288.

Add no-ops for GMAC clocks observed to be requested which match the
clk_enable cases in RK3368 and RK3399.

Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Cc: Wadim Egorov <w.egorov@phytec.de>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-05-14 17:30:40 +02:00
Marek Behún
dd77690c43 clk: armada-37xx: Support soc_clk_dump
Add support for the clk dump command on Armada 37xx.

Signed-off-by: Marek Behun <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-14 10:00:15 +02:00
Marek Behún
82a248df9a driver: clk: Add support for clocks on Armada 37xx
The drivers are based on Linux driver by Gregory Clement.

The TBG clocks support only the .get_rate method.
  - since setting rate is not supported, the driver computes the rates
    when probing and so subsequent calls to the .get_rate method do not
    read the corresponding registers again

The peripheral clocks support methods .get_rate, .enable and .disable.

  - the .set_parent method theoretically could be supported on some clocks
    (the parent would have to be one of the TBG clocks)

  - the .set_rate method would have to try all the divider values to find
    the best approximation of a given rate, and it doesn't seem like
    this should be needed in U-Boot, therefore not implemented

Signed-off-by: Marek Behun <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-14 10:00:15 +02:00
Mario Six
f0bcbe6c18 clk: Add ICS8N3QV01 driver
Add a driver for the ICS8N3QV01 Quad-Frequency Programmable VCXO.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-05-08 18:50:23 -04:00
Fabrice Gasnier
f198bbac66 clk: stm32mp1: Add VREF clock gating
Add VREF clock gating, that may be used by STM32 VREFBUF regulator.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-08 09:07:39 -04:00
Patrice Chotard
8b41464547 clk: clk_stm32f: Use PLLSAIP as USB 48MHz clock
On all STM32F4 and F7 SoCs  family (except STM32F429), PLLSAI
output P can be used as 48MHz clock source for USB and SDMMC.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Tested By: Bruno Herrera <bruherrera@gmail.com>
2018-05-08 09:07:34 -04:00
Tom Rini
4549e789c1 SPDX: Convert all of our multiple license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have multiple licenses (in
these cases, dual license) declared in the SPDX-License-Identifier tag.
In this case we change from listing "LICENSE-A LICENSE-B" or "LICENSE-A
or LICENSE-B" or "(LICENSE-A OR LICENSE-B)" to "LICENSE-A OR LICENSE-B"
as per the Linux Kernel style document.  Note that parenthesis are
allowed so when they were used before we continue to use them.

Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 10:24:31 -04:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Marek Vasut
424060dae4 clk: renesas: Drop USB extal from the R8A7792 clock driver
The R8A7792 does not have the USB extal, so drop it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-05-02 10:49:58 +02:00
Tom Rini
d024236e5a Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR
We have a large number of places where while we historically referenced
gd in the code we no longer do, as well as cases where the code added
that line "just in case" during development and never dropped it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27 14:54:48 -04:00
Kever Yang
c877ef3ac1 rockchip: rv1108: add ofdata_to_platdata() method for driver
Parse of data in dedicated api instead of in probe().

The clk_set_rate() may be called before the clk driver is probed,
after core support set default clock.
This patch fix system abort issue since:
f4fcba5 clk: implement clk_set_defaults()

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-sytems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-sytems.com>
2018-04-25 22:20:07 +02:00
Kever Yang
d2e938d993 rockchip: rk3128: add ofdata_to_platdata() method for driver
Parse of data in dedicated api instead of in probe().

The clk_set_rate() may be called before the clk driver is probed,
after core support set default clock.
This patch fix system abort issue since:
f4fcba5 clk: implement clk_set_defaults()

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-sytems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-sytems.com>
2018-04-25 22:20:06 +02:00
Kever Yang
accaaea5cc rockchip: rk3036: add ofdata_to_platdata() method for driver
Parse of data in dedicated api instead of in probe().

The clk_set_rate() may be called before the clk driver is probed,
after core support set default clock.
This patch fix system abort issue since:
f4fcba5 clk: implement clk_set_defaults()

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25 22:20:06 +02:00
Wadim Egorov
b0ba1e7e9d rockchip: clk: rk3288: add clk_enable function and support USB HOST0/HSIC
The generic ehci-driver (ehci-generic.c) will try to enable the clocks
listed in the DTSI. If this fails (e.g. due to clk_enable not being
implemented in a driver and -ENOSYS being returned by the clk-uclass),
the driver will bail our and print an error message.

This implements a minimal clk_enable for the RK3288 and supports the
clocks mandatory for the EHCI controllers; as these are enabled by
default we simply return success.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25 14:05:09 +02:00
Masahiro Yamada
045e4fcb44 clk: uniphier: disable SPL_CLK
The last clock consumer in SPL, SD/eMMC driver, gave up using the
clock driver.  The clock driver is only used in U-Boot proper.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-24 00:35:35 +09:00
Marek Vasut
010bbe7331 clk: renesas: Minor clean up of the R8A7794 clock driver
The initconst is not used in U-Boot, drop it. The r8a7794_crit_mod_clks
is also not used in U-Boot, so drop it too.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-21 18:00:00 +02:00
Marek Vasut
841feae985 clk: renesas: Minor clean up of the R8A7792 clock driver
The initconst is not used in U-Boot, drop it. The r8a7792_crit_mod_clks
is also not used in U-Boot, so drop it too.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-21 18:00:00 +02:00
Tom Rini
a35747b5e1 Merge git://git.denx.de/u-boot-uniphier 2018-04-18 16:24:26 -04:00
Kunihiko Hayashi
461766cb69 clk: uniphier: add ethernet clock control support
Add clock control for ethernet controller on each SoC.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-18 23:42:25 +09:00
Neil Armstrong
721881c417 clk: fix clk_get_bulk when phandle error
This fixes the Coverity Defect CID 175347 when dev_count_phandle_with_args()
returns a negative value.

Fixes: a855be87da ("clk: Add get/enable/disable/release for a bulk of clocks")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-04-17 17:45:08 -04:00
Marek Vasut
cc64a51546 clk: renesas: Minor clean up of the R8A7790 clock driver
The initconst is not used in U-Boot, drop it. The r8a7790_crit_mod_clks
is also not used in U-Boot, so drop it too.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-13 23:41:44 +02:00
Neil Armstrong
65388d0dc5 clk: add sandbox test for bulk API
This patch adds the bulk clock API tests for the sandbox test suite.

It's very similar to the main test but only uses the _bulk() API and
checks if the clocks are correctly enabled/disabled.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-10 15:18:56 -04:00
Neil Armstrong
a855be87da clk: Add get/enable/disable/release for a bulk of clocks
This patch adds a "bulk" API to the clock API in order to get/enable/disable
/release a group of clocks associated with a device.

This bulk API will avoid adding a copy of the same code to manage
a group of clocks in drivers.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-10 11:52:16 -04:00
Michal Simek
969dd4c7db clk: zynqmp: Add new compatible string for clock driver
New and old clk drivers are sharing IDs and descriptions.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:50 +02:00
Patrick Delaunay
938e0e3f6e clock: stm32mp1: add stgen clock source change support
The STGEN is the clock source for the Cortex A7 arch timer.
So after modification of its frequency, CP15 cntfreq is updated
and a new timer init is performed.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-04-06 20:45:28 -04:00
Alexander Kochetkov
6b0c26fa05 rockchip: clk: rk3188: update dpll settings to make EMAC work
The patch set dpll settings for 300MHz to values used by binary
blob[1]. With new values dpll still generate 300MHz clock, but
EMAC work. Probably with new values dpll generate more stable clock.

dpll on rk3188 provide clocks to DDR and EMAC. With current
dpll settings EMAC doesn't work on radxa rock. EMAC sends packets
to network, but it doesn't receive anything. ifconfig shows a lot
of framing errors.

[1] https://github.com/linux-rockchip/u-boot-rockchip/blob/u-boot-rk3288/
    tools/rk_tools/3188_LPDDR2_300MHz_DDR3_300MHz_20130830.bin

Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28 23:44:59 +02:00
Vipul Kumar
a79b590f78 arm64: zynqmp: Print the value of pl clocks and wdt clock using clk dump
This patch print pl clocks (pl0...pl3) and watchdog
clock using clk dump.

Signed-off-by: Vipul Kumar <vipulk@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23 09:34:44 +01:00
Michal Simek
58afff43e3 clk: zynq: Show watchdog clock rate properly
watchdog clock is also connected to cpu 1X clocksource.

Zynq> clk dump
...

Before:
      swdt          4294967290
After:
      swdt           111111110

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23 09:34:43 +01:00
Patrick Delaunay
266fa4df00 clk: stm32mp1: add clock tree initialization
add binding and code for clock tree initialization from device tree

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19 16:14:22 -04:00
Patrick Delaunay
a6151916cb clk: add driver for stm32mp1
add RCC clock driver for STMP32MP157
- base on driver model = UCLASS_CLK
- support ops to enable, disable and get rate
  of all SOC clock needed by U-Boot

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19 16:14:22 -04:00
Wenyou Yang
162a7de5e5 clk: at91: clk-system: add set/get_rate operations
To support set/get the clock rate, add set/get_rate operations.

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
2018-03-16 07:30:04 -04:00
Wenyou Yang
fed0509c92 clk: at91: add PLLADIV driver
As said in the SAMA5D2 datasheet, the PLLA clock must be divided
by 2 by writing the PLLADIV2 bit in PMC_MCKR, if the ratio between
PCK and MCK is 3 (MDIV = 3). This is the purpose of the driver.

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
2018-03-16 07:30:04 -04:00
Wenyou Yang
cb0cb1b0cf clk: at91: add USB Host clock driver
Add USB clock driver to configure the input clock and the divider
in the PMC_USB register to generate a 48MHz and a 12MHz signal to
the USB Host OHCI.

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
2018-03-16 07:30:04 -04:00
Patrice Chotard
6243c88448 clk: clk_stm32f: Add DSI clock support
DSI clock is available on STM32F769-disco and
STM32F469-disco board.

Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13 21:45:37 -04:00
Patrice Chotard
5e993508cb clk: clk_stm32f: Add set_rate for LTDC clock
Implement set_rate() for LTDC clock only, set_rate for other
clocks will be added if needed. This is needed by future LTDC driver
improvements.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13 21:45:37 -04:00
Patrice Chotard
e8fb9ed254 clk: clk_stm32f: Configure SAI PLL to generate LTDC pixel clock
Configure SAI PLL configuration to generate LTDC pixel clock on
the PLLSAIR output.

PLLSAI is enabled only if CONFIG_VIDEO_STM32 flag is set.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13 21:45:37 -04:00
Patrice Chotard
1038e033e1 clk: clk_stm32f: Rework SDMMC stm32_clk_get_rate() part
Rework the way SDMMC clock get rate is done in a more
generic way :

_ Add stm32_clk_get_pllsai_rate() which give the PLLSAI
  indicated output rate.

_ Add stm32_clk_get_pllsai_vco_rate() which give the VCO
  internal rate.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13 21:45:37 -04:00
Patrice Chotard
651a70e8d5 clk: clk_stm32f: No more need of 48Mhz from PLL_SAI
Initially, 48Mhz for SDIO clock was generated from SAI pll for
STM32F469 and STM32F746 SoCs, but this solution was not suitable
for STM32F429 SoCs.

A generic solution is to used the PLL_Q output as 48Mhz clock
for all STM32F SOCs family.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13 21:45:37 -04:00
Patrice Chotard
526aa92960 clk: clk_stm32f: Fix RCC_PLLSAICFGR mask defines
Use the correct name for RCC_PLLSAICFGR_PLLSAIx_MASK masks.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13 21:45:37 -04:00
Patrice Chotard
aa230be4bf clk: clk_stm32f: Fix stm32_clk_get_rate()
Wrong parameter was passed to stm32_clk_pll48clk_rate().
sysclk (PLL_p output value) was passed instead of VCO value.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13 21:45:37 -04:00
Patrice Chotard
aa5e3e22f4 board: stm32: switch to DM STM32 timer
Use available DM stm32_timer driver instead of dedicated
mach-stm32/stm32fx/timer.c.

Remove all defines or files previously used for timer usage in
arch/arm/include/asm/arch-stm32fx and in arch/arm/mach-stm32/stm32fx

Enable DM STM32_TIMER for STM32F4/F7 and H7.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13 21:45:37 -04:00
Patrice Chotard
09b335a675 clk: clk_stm32h7: Fix prescaler for Domain 3
d1cfgr register was used to calculate the domain 3
prescaler value instead of d3cfgr.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13 21:45:37 -04:00