Commit Graph

10561 Commits

Author SHA1 Message Date
Stephen Warren
8b7d092454 MAINTAINERS: drop bcm283x/rpi maintainership
It's been a while since I've touched U-Boot on the Raspberry Pi and
other things have been taking my time. Drop my maintainership for this
port.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2017-07-08 20:43:05 -04:00
Christophe Leroy
53193a4f07 powerpc, 8xx: Add support for MCR3000 board from CSSI
CS Systemes d'Information (CSSI) manufactures two boards, named MCR3000
and CMPC885 which are respectively based on MPC866 and MPC885 processors.

This patch adds support for the first board.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-08 15:56:06 -04:00
Andy Shevchenko
daab59ac05 avr32: Retire AVR32 for good
AVR32 is gone. It's already more than two years for no support in Buildroot,
even longer there is no support in GCC (last version is heavily patched 4.2.4).

Linux kernel v4.12 got rid of it (and v4.11 didn't build successfully).

There is no good point to keep this support in U-Boot either.

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-07-06 16:17:19 -04:00
Holger Brunck
945e3b5157 km/common: remove unused code
The 82xx board mgcoge3ne was removed from the codebase, so this is dead
code.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Cc: Heiko Schocher <hs@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
2017-07-06 16:17:17 -04:00
Ladislav Michl
ab3b7770b6 igep003x: Falcon mode
Implement spl_start_uboot to let Falcon mode work.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Heiko Schocher <hs@denx.de>
2017-07-06 13:09:38 -04:00
Martin Böh
cb86d3746a odroid-c2: Populate serial# environment variable from efuse 2017-07-06 13:09:36 -04:00
Heiko Schocher
98f705c9ce powerpc: remove 4xx support
There was for long time no activity in the 4xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 4xx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>
2017-07-03 17:35:28 -04:00
Fabio Estevam
8d6040c725 pico-imx7d: Remove bouncing email
Wig Cheng's email bounces, so remove it from the maintainers list.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-06-29 21:30:16 -04:00
Tom Rini
f42f25dad8 Merge git://git.denx.de/u-boot-arc 2017-06-29 15:28:51 -04:00
Marek Vasut
e3f40720ba ARM: at91: ma5d4: Support both SF and eMMC SoMs
Discern the SoMs based on the presence of SPI flash to support both
variants of the SoM, one booting from SPI NOR and one booting from
eMMC.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
2017-06-29 13:31:06 -04:00
Marek Vasut
8997de292a ARM: at91: ma5d4: Boot from MMC2 when using SAM-BA
Continue loading U-Boot from MMC2 when the SPL was loaded using SAM-BA
loader. This allows the board to boot system from the removable media
instead of the eMMC, which is useful for commissioning purposes. When
booting from the eMMC, always boot from it as it is not possible to
boot from the SD interface directly.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
2017-06-29 13:30:51 -04:00
Marek Vasut
4425be39eb ARM: at91: ma5d4: Swap SD/MMC controller order
The SDHCI1 is the primary boot controller on rev. 2.1 SoM, which
is the version available on the market. Swap the controller order
to match this and future versions of the SoM.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
2017-06-29 13:30:50 -04:00
Marek Vasut
24257db071 ARM: at91: ma5d4: Init SD/MMC controller in SPL
Init the controllers, otherwise the board cannot boot from SD/MMC.
This boot option is new on rev. 2.1 SoM .

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
2017-06-29 13:30:49 -04:00
Marek Vasut
52a557d64c ARM: at91: ma5d4: Reset CAN controllers late
The CAN controllers need slight delay between toggling of their reset
line. Move this action into board_init(), otherwise timer will not be
initialized and the board might hang.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
2017-06-29 13:30:28 -04:00
Marek Vasut
ae625ae5a1 ARM: at91: ma5d4: Switch DDR2 controller to sequencial address decoding
According to the datasheet, sequential mapping is used for DDR
SDRAM, while interleaved mapping is used for regular SDRAM.
Incorrect configuration of this bit does indeed cause sporadic
memory instability.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Wenyou Yang <wenyou.yang@atmel.com>
2017-06-29 13:30:28 -04:00
Marek Vasut
f1d56dffd7 ARM: atmel: Rename MA5D4EVK
The board is now manufactured by Aries Embedded GmbH , rename it.

Signed-off-by: Marek Vasut <marex@denx.de>
2017-06-29 13:30:27 -04:00
Alexey Brodkin
67482f57e6 arc: Add support for HS Development Kit board
ARC HS Development Kit board is a new low-cost
development platform sporting ARC HS38 in real silicon
with nice set of features such as:
 * Quad-core ARC HS38 with 512 kB L2 cache and running @1GHz
 * 4Gb of DDR (we use only lowest 1Gb out of it now)
 * Lots of DesigWare peripherals
 * Different connectivity modules:
     - Synopsys HAPS HT3
     - Arduino-compatible connector
     - MikroBUS

This initial commit supports the following peripherals:
 * UART (DW 8250)
 * Ethernet (DW GMAC)
 * SD/MMC (DW Mobile Storage)
 * USB 1.1 & 2.0

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2017-06-29 19:34:10 +03:00
Heiko Schocher
be2787bf29 atmel, at91: fix taurus board
since commit: f8b7fff1d5 "serial: atmel_usart: Add clk support"

taurus board comes not up anymore. Fix it.

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Wenyou Yang <wenyou.yang@microchip.com>
2017-06-29 10:01:12 -04:00
Heiko Schocher
e91ead868b at91, dfu, smartweb: set serial number
since commit 842778a091 dfu-util shows serial="UNDEFINED".

to see here again a serial number, we have to call
g_dnl_set_serialnumber().

Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-29 10:01:12 -04:00
Heiko Schocher
be884598da atmel, at91: fix smartweb board
since commit: f8b7fff1d5 "serial: atmel_usart: Add clk support"

smartweb board comes not up anymore. Fix it.

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Wenyou Yang <wenyou.yang@microchip.com>
2017-06-29 10:01:11 -04:00
Tom Rini
de8203653f ti816x: Enable ethernet support
The ti816x SoC revision of the ethernet IP block is handled by the
"davinci_emac" driver, rather than the "cpsw" driver as done by later
members of the family.  Enable the relevant plumbing.

Signed-off-by: Sriramakrishnan <srk@ti.com>
Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-28 11:43:39 -04:00
Tom Rini
821560fd8e Merge git://www.denx.de/git/u-boot-imx
Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
	include/configs/imx6qdl_icore_rqs.h
	include/configs/imx6ul_geam.h
	include/configs/imx6ul_isiot.h
2017-06-27 09:32:37 -04:00
Rob Clark
0f546eaf00 board/db410c: add missing linker map entries for efi
Otherwise the loaded image would miss the efi_runtime sections, and fall
over hard when grub (for example) tried to call runtime services located
in this section.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-06-23 10:38:08 -04:00
Tom Rini
3a97763aab controlcenterd_36BIT_SDCARD: Fix unused variable warning
On the controlcenterd_36BIT_SDCARD config we get a warning about
prg_stage1_prepare being unused.  Move the declaration closer to usage
and hide under the existing #if tests.

Cc: Dirk Eibach <eibach@gdsys.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-23 10:38:05 -04:00
Bin Meng
70b95ded03 x86: minnowmax: Configure GPIO pins to turn on USB ports VBUS
GPIO bank E pin 8 & 9 are used to control the on-board two USB ports
VBUS on/off. Let's configure them in the misc_init_r().

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
2017-06-22 14:58:10 +08:00
Tom Rini
784667d7f9 Xilinx changes for v2017.07
ZynqMP:
 - config cleanup
 - SD LS mode support
 - psu_init* cleanup
 - unmap OCM
 - Support for SMC
 
 Zynq:
 - add ddrc to Kconfig
 - add topic-miamilite board support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAllJNGcACgkQykllyylKDCEBrACdE1X8RroAQZQ3cN3yEXp/OQ3V
 D+gAn1PAUvy3zT8UDiJcF1rCxptvlKlv
 =4ans
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2017.07' of git://www.denx.de/git/u-boot-microblaze

Xilinx changes for v2017.07

ZynqMP:
- config cleanup
- SD LS mode support
- psu_init* cleanup
- unmap OCM
- Support for SMC

Zynq:
- add ddrc to Kconfig
- add topic-miamilite board support
2017-06-21 07:57:37 -04:00
Mike Looijmans
e625881ad7 arm: zynq: Add support for the topic-miamilite system-on-module
The topic-miamilite SoM contains a Zynq xc7z010 SoC, 1GB DDR3L RAM,
64MB dual-parallel QSPI NOR flash and clock sources.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-20 16:42:13 +02:00
Michal Simek
fb4000e871 arm64: zynqmp: Check pmufw version
If PMUFW version is not v0.3 then panic.
ZynqMP switch to CCF based clock driver which requires
PMUFW to be present at certain version.
This patch ensure that you use correct and tested PMUFW
binary.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-20 16:42:13 +02:00
Michal Simek
1ac237b66b arm64: zynqmp: Add empty sleep.h file for psu_init* compilation
psu_init* contain sleep.h header which is not present in u-boot.
Instead of keep comment sleep.h in psu_init* it is easier to add empty
file which is included.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-20 16:40:58 +02:00
Michal Simek
85a275ba02 arm64: zynqmp: Fix psu_init* external functions
In older vivado version some psu_init* files didn't contain
mask*() which were missing.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-19 16:53:10 +02:00
Tom Rini
ebba9d1daf Merge branch 'master' of git://git.denx.de/u-boot-sunxi 2017-06-19 08:08:40 -04:00
Heiko Schocher
064b55cfcb powerpc, 5xxx, 512x: remove support for mpc5xxx and mpc512x
There was for long time no activity in the mpx5xxx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in mpc5xxx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-16 10:14:55 -04:00
Hannes Schmelzer
f68773728f board/BuR/brxre1: fix MMC boot
since commit

'd5abcf94c7123167725fc22ace342f0d455093c1' -
ti: boot: Register the MMC controllers in SPL in the same way as in u-boot

MMC boot on brxre1 board is broken, with this commit we make our board
working again.

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2017-06-16 10:11:38 -04:00
Masahiro Yamada
51855e8981 treewide: remove unneeded semicolons
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-06-16 10:11:38 -04:00
Tom Rini
4f58002013 Merge git://git.denx.de/u-boot-mpc85xx 2017-06-14 18:53:03 -04:00
Tom Rini
11b66916e0 Merge branch 'master' of git://git.denx.de/u-boot-tegra 2017-06-14 18:52:49 -04:00
Jagan Teki
2b1a33213e sun50i: h5: Add initial NanoPi NEO2 support
NanoPi NEO2 is designed and developed by FriendlyElec
using the Allwinner 64-bit H5 SOC.

NanoPi Neo2 key features
- Allwinner H5, Quad-core 64-bit Cortex-A53
- 512MB DDR3 RAM
- microSD slot
- 10/100/1000M Ethernet
- Serial Debug Port
- 5V 2A DC MicroUSB power-supply

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2017-06-14 20:25:56 +05:30
Jagan Teki
bdf9577355 sun50i: a64: Add initial Orangepi Win/WinPlus support
Orangepi Win/WinPlus is an open-source single-board computer
using the Allwinner A64 SOC.

A64 Orangepi Win/WinPlus has
- A64 Quad-core Cortex-A53 64bit
- 1GB(Win)/2GB(Win Plus) DDR3 SDRAM
- Debug TTL UART
- Four USB 2.0
- HDMI
- LCD
- Audio and MIC
- Wifi + BT
- IR receiver
- 5V DC power supply

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2017-06-14 15:58:39 +05:30
Jagan Teki
d6b1d7d81b sun50i: h5: Add initial Orangepi Zero Plus 2 support
Orangepi Zero Plus 2 is an open-source single-board computer
using the Allwinner h5 SOC.

H5 Orangepi Zero Plus 2 has
- Quad-core Cortex-A53
- 512MB DDR3
- micrSD slot and 8GB eMMC
- Debug TTL UART
- HDMI
- Wifi + BT
- OTG+power supply

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2017-06-14 15:52:19 +05:30
Stephen Warren
2eb3e28b2c ARM: tegra: remove Whistler support
Whistler is an ancient Tegra 2 reference board. I may have been the only
person who ever used it with upstream software, and I've just recycled
the board hardware. Hence, it makes sense to remove support from software.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2017-06-12 13:03:50 -07:00
York Sun
1079af4817 powerpc: fsl: Update maintainers
Update maintainers for B4860QDS, P1010RDB, P1_TWR, T104xRDB.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12 12:18:37 -07:00
York Sun
5a4ff0d9ef powerpc: mpc8569mds: Update config and maintainer
Enable DHCP command by default. Update maintainer info.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12 12:18:37 -07:00
York Sun
cdab5e909a powerpc: mpc8568mds: Update board config
Enable DHCP command by default. Move environmental variable location
to before U-Boot image. Enlarge reserved mem for malloc. Update
maintainer.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12 12:18:37 -07:00
York Sun
8b7261f84c powerpc: mpc8536ds: Update maintainer
Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12 12:18:37 -07:00
York Sun
853f6a8770 powerpc: mpc8544ds: Update maintainer
Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12 12:18:37 -07:00
York Sun
531aaaec28 powerpc: mpc8548cds: Update maintainer
Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12 12:18:36 -07:00
York Sun
c58635add8 powerpc: mpc86xx: Update maintainer for MPC8610HPCD and MPC8641HPCN
Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12 11:30:00 -07:00
York Sun
3eaaa718e7 powerpc: mpc85xx: Update maintainer for MPC8541CDS and MPC8555CDS
Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12 11:30:00 -07:00
York Sun
3913191c8a powerpc: mpc8540ads: mpc8560ads: Drop support for MPC8540/60ADS
Drop support for these two legacy boards.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12 11:30:00 -07:00
Lokesh Vutla
9f7923c73c board: ti: am335x: Fix scale_vcore for beaglebones
commit 0650798824 ("board: am335x: Introduce scale_vcores")
updated voltages of each board based on efuse. It updated
beagle bone specific voltages under the condition board_is_bone().
But this is true only for BeagleBoneWhite. Due to which voltages
are not configured for BBB, BBW as wrong device is being probed.

So create a common function board_is_beaglebonex() which includes
am335x based beagle family. Use this for updating voltages.

Also remove extra if condition for selecting voltages which is
done later using a switch case and match usb current limit as
before the commit 0650798824.

Fixes: 0650798824 ("board: am335x: Introduce scale_vcores")
Reported-by: Emmanuel Vadot <manu@bidouilliste.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-06-12 08:38:48 -04:00