Commit Graph

2039 Commits

Author SHA1 Message Date
Matwey V. Kornilov
1b0a936b52 rockchip, Makefile: add idbloader.img target
Many Rockchip platforms require the same u-boot deploy procedure
when TPL and SPL both enabled.

The following examples are taken from doc/README.rockchip
and board/theobroma-systems/lion_rk3368/README:

RK3288:

  ./tools/mkimage -n rk3288 -T rksd -d ./tpl/u-boot-tpl.bin out
  cat ./spl/u-boot-spl-dtb.bin >> out
  sudo dd if=out of=/dev/mmcblk0 seek=64

RK3328:

  ./tools/mkimage -n rk3328 -T rksd -d ./tpl/u-boot-tpl.bin idbloader.img
  cat ./spl/u-boot-spl.bin >> idbloader.img
  sudo dd if=idbloader.img of=/dev/mmcblk0 seek=64

RK3368:

  ./tools/mkimage -n rk3368 -T rksd -d tpl/u-boot-tpl.bin spl-3368.img
  cat spl/u-boot-spl-dtb.bin >> spl-3368.img
  dd if=spl-3368.img of=/dev/sdb seek=64

RK3399:

  ./tools/mkimage -n rk3399 -T rksd -d ./tpl/u-boot-tpl-dtb.bin out
  cat ./spl/u-boot-spl-dtb.bin >> out
  sudo dd if=out of=/dev/sdc seek=64

Here, we introduce generic idbloader.img target
which is the TPL image followed by the SPL binary.

Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-11 16:16:12 +08:00
Heinrich Schuchardt
2e0f324178 network: set timeline for CONFIG_DM_ETH conversion
The driver model has been supported for network drivers since 2015. It is
time to convert the remaining boards. Set July 2020 as a timeline.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-04 11:37:19 -05:00
Rasmus Villemoes
47e8ee6b39 Makefile: fix newline escaping for CONFIG_DEFAULT_ENV_FILE
I wanted this to be compatible with mkenvimage, including the ability
to embed newlines in variables by escaping them. But I failed to check
that it works more than once.

Fixes: f3d8f7dd73 (Allow providing default environment from file)
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2019-08-31 09:27:24 -04:00
Suniel Mahesh
27351ca804 Makefile: clean build generated SPL binary for TI AM65x
TI AM65x platforms (evm and HS) generate an SPL image
'tispl.bin*' and there is no rule for cleanup.
Added entry for cleanup in clean target.

Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
2019-08-30 14:17:11 -04:00
Tom Rini
e4b8dd9b34 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx
Support of device tree model for T2080RDB, T4240RDB, T1024RDB,
T1042D4RDB, P1020RDB, P2020RDB, P2041RDB, P3041DS, P4080DS, P5040DS and
MPC8548CDS. Also support of  i2c dm model.
2019-08-27 07:11:37 -04:00
Tom Rini
d39221f33f Prepare v2019.10-rc3
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-26 20:16:42 -04:00
Hou Zhiqiang
bcda5b0df3 powerpc: mpc85xx: Add device tree support option for PBL boot image
The current Makefile always use u-boot.bin to generate
PBL boot image (u-boot.pbl), this patch changes it to
use u-boot-with-dtb.bin to support device tree when
CONFIG_OF_SEPARATE is enabled.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-26 21:16:28 +05:30
Lukas Auer
2c7686137b Makefile: support building SPL FIT images without device trees
When building a U-Boot FIT image, the device trees specified by the
board are unconditionally built for inclusion in the FIT image. However,
not all device tree providers, such as CONFIG_OF_PRIOR_STAGE, require a
device tree to be built and bundled with the U-Boot binary. They rely on
other mechanisms to provide the device tree to U-Boot. Compilation on
boards with these device tree providers fails, because they do not
specify a device tree.

Change the makefile rules to conditionally build the device trees if
CONFIG_OF_SEPARATE, CONFIG_OF_EMBED, or CONFIG_OF_HOSTFILE is selected
as device tree provider.

Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-08-26 16:07:42 +08:00
Tom Rini
f55e80f37e Prepare v2019.10-rc2
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-13 18:23:35 -04:00
Tom Rini
d0d07ba86a Prepare v2019.10-rc1
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-29 21:16:16 -04:00
Tom Rini
de17e1fc03 binman support for replacing files
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl0/Y4EACgkQfxc6PpAI
 reYhFwgAjqO+3dtXVPwo9vX/+9VzWUIMiBalYFZxSqFR2KDSkj+VjQOQCvyQRslv
 RydnyMgMaZbIXoPFU1Fa5Pz9zDDJ0DcG3LPIBi4/2ELH/ezwv1IdL73Ol7ulA+G7
 Z3d7fwa4RWiF35z5Rl/ck1eqOAazZepsmiVQfLKX/KlHz24+nGyWKf49JAqWcfu1
 bAuwKpwg/FIX8ni8JbL2CdNBK4RXAkec3TCcbanT+LlDF6gKyrx0XDv4M+9bsKD4
 REDXOAiQTujM4v5j4VNL97JFg/l68nhMn0CZAJQQ4zS65bnUXEvuCFvqEXD7pGV9
 3Fsw0VroncfvGHnvd3NoNpZ5TfkqDQ==
 =q4Cl
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-29jul19' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm

binman support for replacing files
2019-07-29 17:59:51 -04:00
Bartosz Golaszewski
e31148247a i2c: remove i2c driver-model compatibility layer
There are no more users of the compatibility layer for i2c. Remove the
driver and all references to it.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Heiko Schocher <hs@denx.de>
2019-07-29 17:58:52 -04:00
Bartosz Golaszewski
3ec7fc45e5 sandbox: remove CONFIG_DM_I2C_COMPAT from defconfigs
There are no more "real" users of CONFIG_DM_I2C_COMPAT and we'll soon
remove it altogether. Stop building it in sandbox mode.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Heiko Schocher <hs@denx.de>
2019-07-29 17:58:52 -04:00
Stephen Warren
4f4fb85ec0 Makefile: fix implementation of BINMAN_DEBUG
binman only accepts the -D argument early on the command-line, yet the
Makefile currently passes it near the end. This causes the build to fail
if this feature is used. Re-order the command-line to fix this.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-29 09:38:06 -06:00
Simon Glass
53cd5d921d binman: Convert to use ArgumentParser
This class is the new way to handle arguments in Python. Convert binman
over to use it. At the same time, introduce commands so that we can
separate out the different parts of binman functionality.

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-24 12:54:07 -07:00
Masahiro Yamada
382de4a7e9 arm64: add an option to switch visibility of CONFIG_SYS_INIT_SP_BSS_OFFSET
By default, CONFIG_SYS_INIT_SP_BSS_OFFSET was made invisible by not
giving a prompt to it.

The only way to define it is to hard-code an extra entry in SoC/board
Kconfig, like arch/arm/mach-tegra/tegra{186,210}/Kconfig.

Add a prompt to it in order to allow defconfig files to specify the
value of CONFIG_SYS_INIT_SP_BSS_OFFSET.

With this, CONFIG_SYS_INIT_SP_BSS_OFFSET would become always visible.
So, we need a new bool option to turn it off by default.

I move the 'default 524288' to the common place. This value is not too
big, but is big enough to avoid the overwrap of DT in most platforms.
If 512KB is not a suitable choice for your platform, you can change it
from your defconfig or menuconfig etc.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2019-07-10 22:37:23 +09:00
Tom Rini
e5aee22e4b Prepare v2019.07
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-08 15:23:28 -04:00
Jagan Teki
96070460c3 rockchip: rk3399: Get bl31.elf via BL31
Right now rockchip platform need to copy bl31.elf into u-boot
source directory to make use of building u-boot.itb.

So, add environment variable BL31 like Allwinner SoC so-that the
bl31.elf would available via BL31.

If the builds are not exporting BL31 env, the make_fit_atf.py
explicitly create dummy bl31.elf in u-boot root directory to
satisfy travis builds and it will show the warning on console as

 WARNING: BL31 file bl31.elf NOT found, resulting binary is non-functional
 WARNING: Please read Building section in doc/README.rockchip

Note, that the dummy bl31 files were created during not exporting
BL31 case would be removed via clean target in Makefile.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-06-26 21:11:27 +08:00
Jagan Teki
cc2cf69093 Makefile: clean bl31_*.bin
Rockchip platform has its python script that would generate various
bl31_*bin for creating u-boot.itb file by taking bl31.elf as input.

These bl31_*.bin files are generated in u-boot root directory and
have no rule to clean it up. so add support for it by adding in
command entry of clean target in Makefile.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26 21:11:27 +08:00
Jagan Teki
8f06f0cee3 Makefile: clean image.map
binman tools for creating single image build will create image.map
at the end, which has information about binman image node details.

current u-boot, is unable to clean this image.map so add a command
entry in clean target in Makefile.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26 21:11:27 +08:00
Breno Matheus Lima
656d8da9d2 doc: Remove duplicated documentation directory
Commit ad7061ed74 ("doc: Move device tree bindings documentation to
 doc/device-tree-bindings") moved all device tree binding documentation
to doc/device-tree-bindings directory.

The current U-Boot project still have two documentation directories:

- doc/
- Documentation/

Move all documentation and sphinx files to doc directory so all content
can be in a common place.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
2019-06-20 10:57:08 -04:00
Tom Rini
c3f43185ee Merge branch 'master' of git://git.denx.de/u-boot-spi
- Drop zipitz2 board (Tom)
- Add DEPRECATED option (Tom)
- Mark legacy or non-dm drivers as DEPRECATED (Jagan)
2019-06-17 11:32:22 -04:00
Jagan Teki
bb85afc7f3 Makefile: Trigger a warning for legcay spi drivers
We have a warning text for non dm converted spi drivers, but the plan is
to mark all these respective drivers with CONFIG_DEPRECATED.

So, trigger a warning saying that these driver configurations and
associated code will remove in v2019.07 (earlier plan is to remove it
from v2019.04)

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-06-13 12:51:06 +05:30
Jagan Teki
63235bd077 Makefile: Trigger a Warning if DEPRECATED is defined
If configured target has deprecated configs enabled, trigger a warning
about this.

Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[trini: Change from BROKEN to DEPRECATED]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-13 12:51:06 +05:30
Tom Rini
529faf80c3 u-boot-imx-20190612
--------------------
 
 - Board fixes:
 	- imx6logic
 	- wandboard
 	- mx6sabre boots again
 	- imx8qm_mek
 	- pico-* boards
 	- Toradex apalis / colibri
 	- engicam imx6 (environment)
 	- KP MX53
 	- opos6ul
 - Switch to DM:
 	- vining2000
 	- dh MX6
 	- Toradex colibri i.MX7
 	- Novena
 - Security : fix CSF size for HAB
 - Other:
       - imx: fix building for i.mx8 without spl
       - pcie and switch to DM
 
       mx6sabreauto: Enable SPL SDP support
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAlz/bLMPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3W7oL/1rYXpSr2JE8fdXvqtmugjaPr7lQFzE7Bjkw
 pDyDZA+3tpG8lv5xwjUi0Q+c38RRY6K/1lP/bztGXal+ryx/V0HFNAKKdhzedxhy
 kgB3BGyp0rdEpzRwBLEkUCVFKJyVMI9ztPpzun6FDm+pyvIN4vnvziYPlkrYSyVk
 ZrvCGk6X8OYAJ3qNcTcttPIXTfv0QTs8l6bpw3kHSVoUSAGGQc2FxOUmxvwsZedN
 jpVJ5iB/2xrmSyWMIcGAfXLhzNolooeFgcqdKj7X+x0l0Q1p/S4srGKfYRqqhsAO
 q4H/Xjt47e6oWVclbh3TypnUuxAw0i2BhhczAbr/nnN42aNySWrtQyZm33h/esAy
 dcriYUvHlsoC00sfB1xShF4rhBno8OW+ExJVDwsVMalJr9WI4FujwsE/Aw+CUec8
 ompz1IUz+2+BG+PcVbDNxysM5TcqpdQOaq0JKQUnz/xzyocV75M2pFw9YzQE85J7
 yHAoq5OlW//B1wSRuPlH3vBkVWf2SA==
 =pRXQ
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20190612' of git://git.denx.de/u-boot-imx

u-boot-imx-20190612
--------------------

- Board fixes:
	- imx6logic
	- wandboard
	- mx6sabre boots again
	- imx8qm_mek
	- pico-* boards
	- Toradex apalis / colibri
	- engicam imx6 (environment)
	- KP MX53
	- opos6ul
- Switch to DM:
	- vining2000
	- dh MX6
	- Toradex colibri i.MX7
	- Novena
- Security : fix CSF size for HAB
- Other:
      - imx: fix building for i.mx8 without spl
      - pcie and switch to DM

      mx6sabreauto: Enable SPL SDP support
2019-06-11 13:41:24 -04:00
Heiko Schocher
16c776d321 arm, imx, Makefile: fix u-boot-dtb.imx build in CONFIG_MULTI_DTB_FIT case
in case CONFIG_MULTI_DTB_FIT is set and u-boot-dtb.imx
image is build, currently u-boot-dtb.bin is used for
generating the u-boot-dtb.imx binary, which is wrong, as
it contains only a dtb blob not the fit.blob

Use instead the u-boot-fit-dtb.bin for generating
u-boot-dtb.imx which contains the fit.blob.

Signed-off-by: Heiko Schocher <hs@denx.de>
2019-06-11 10:42:48 +02:00
Tom Rini
fc6c0e29a2 Prepare v2019.07-rc4
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-10 21:27:46 -04:00
Simon Goldschmidt
2577015dc5 spl: add overall SPL size check
This adds a size check for SPL that can dynamically check generated
SPL binaries (including devicetree) for a size limit that ensures
this image plus global data, heap and stack fit in initial SRAM.

Since some of these sizes are not available to make, a new host tool
'spl_size_limit' is added that dumps the resulting maximum size for
an SPL binary to stdout. This tool is used in toplevel Makefile to
implement the size check on SPL binaries.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-06-07 11:03:39 -04:00
Heinrich Schuchardt
0a0f23142f configs: define CONFIG_SPL_SIZE_LIMIT
A new configuration variable CONFIG_SPL_SIZE_LIMIT is introduced to define
the board specific maximum size for the SPL file.

Use Makefile function size_check() to implement the test.

Depending on the size of CONFIG_SPL_SIZE_LIMIT an error like the following
is thrown:

spl/u-boot-spl.bin exceeds file size limit:
  limit:  30720 bytes
  actual: 33426 bytes
  excess: 2706 bytes
make: *** [Makefile:1663: spl/u-boot-spl.bin] Error 1

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-07 11:03:39 -04:00
Heinrich Schuchardt
219dee7e38 imx: move BOARD_SIZE_CHECK to main Makefile
We currently have duplicate definitions for BOARD_SIZE_CHECK in Makefile
and arch/arm/mach-imx/Makefile.

Move the board size check from arch/arm/mach-imx/Makefile to Makefile.

Depending on the value of CONFIG_BOARD_SIZE_LIMIT an error like an error
like the following is thrown:

u-boot-dtb.imx exceeds file size limit:
  limit:  503696 bytes
  actual: 509720 bytes
  excess: 6024 bytes
make: *** [Makefile:1051: u-boot-dtb.imx] Error 1

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-06-07 11:03:39 -04:00
Heinrich Schuchardt
b275030e50 Makefile: reusable function for BOARD_SIZE_CHECK
Carve out function size_check from macro BOARD_SIZE_CHECK. This will allow
us to reuse the function for other file size checks.

Depending on the value of CONFIG_BOARD_SIZE_LIMIT an error like the
following is thrown:

u-boot-dtb.img exceeds file size limit:
  limit:  409516 bytes
  actual: 444346 bytes
  excess: 34830 bytes
make: *** [Makefile:1212: u-boot-dtb.img] Error 1

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-07 11:03:39 -04:00
Tom Rini
7c7919cd07 Prepare v2019.07-rc3
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-27 14:29:39 -04:00
Marek Vasut
5602330df0 ARM: rmobile: Add recovery SPL for R-Car Gen3
Build an SPL which can be started via SCIF download mode on R-Car Gen3
and allows loading and executing U-Boot uImage with the next stage code.
This is also useful for starting e.g. ATF BL2, which inits the hardware
and returns to the U-Boot SPL, which can then load e.g. U-Boot proper.

The H3, M3-W, M3-N SoCs have plenty of SRAM for storing the U-Boot SPL
while the payload, e.g. ATF BL2, executes, so there is no problem here.

However, E3 and D3 have much less SRAM, hence the loader uses a trick
where it copies itself beyond the area used by BL2 and executes from
there. That area is 32kiB large and not enough to hold U-Boot SPL, BSS,
stack and malloc area, so the later two are placed at +0x4000 offset
from start of SRAM, another area not used by ATF BL2. To make things
even more complicated, the SCIF loader cannot load to the upper 32kiB
of the SRAM directly, hence the copying approach.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-21 22:15:31 +02:00
Tom Rini
748198cb8d Revert "Makefile: Prioritize external dtb if defined"
This is causing unexpected size growth in the normal case and is likely
to have been mis-applied by myself.

This reverts commit 3eaf6dcd93.

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-19 18:09:35 -04:00
Michal Simek
3eaf6dcd93 Makefile: Prioritize external dtb if defined
Prioritize external dtb if its passed via EXT_DTB
than the dtb that was built in the tree. With this
patch it appends the specified external dtb to
the u-boot image.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-05-18 12:31:58 -04:00
Tom Rini
5b4b680cfe Prepare v2019.07-rc2
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-15 15:58:48 -04:00
Vagrant Cascadian
878e2a50b5 Set time and umask on fit-dtb.blob to ensure reproducibile builds.
Support for compressed fit-dtb.blob was added in:

  commit 95f4bbd581 ("lib: fdt: Allow LZO and GZIP DT compression in
  U-Boot")

When building compressed (lzop, gzip) fit-dtb.blob images, the
compression tool may embed the time or umask in the image.

Work around this by manually setting the time of the source file using
SOURCE_DATE_EPOCH and a hard-coded 0600 umask.

With gzip, this could be accomplished by using -n/--no-name, but lzop
has no current workaround:

  https://bugs.debian.org/896520

This is essentially the same fix applied to multi-dtb fit SPL images in:

  commit 8664ab7deb ("Set time and umask on multi-dtb fit images to
  ensure reproducibile builds.")

Signed-off-by: Vagrant Cascadian <vagrant@reproducible-builds.org>
2019-05-09 20:22:04 -04:00
Vagrant Cascadian
3ee8d91328 Remove fit-dtb.blob* in clean target.
Support for compressed fit-dtb.blob was added in:

  commit 95f4bbd581 ("lib: fdt: Allow LZO and GZIP DT compression in
  U-Boot")

Adjust Makefile to also clean compressed blobs.

Signed-off-by: Vagrant Cascadian <vagrant@reproducible-builds.org>
2019-05-09 20:22:04 -04:00
Stefan Roese
80af0fed23 dm: MIGRATION: Add migration plan for WDT (DM watchdog support)
As much of the watchdog system has been migrated to DM now, formalize a
deadline for migration.

Please note that the old CONFIG_HW_WATCHDOG macro should be removed
completely at some point.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
2019-05-09 19:52:55 -04:00
Simon Glass
d68574a72d x86: Allow 16-bit init to be in TPL
At present we support having 16-bit init be in SPL or U-Boot proper, but
not TPL. Add support for this so that TPL can boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-05-08 13:02:13 +08:00
Ley Foon Tan
5918afda9d ddr: altera: Compile ALTERA SDRAM in SPL only
Compile ALTERA_SDRAM driver in SPL only.
Rename ALTERA_SDRAM to SPL_ALTERA_SDRAM.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-05-06 12:44:17 +02:00
Tom Rini
a69120a0d7 Prepare v2019.07-rc1
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-29 21:54:04 -04:00
Stefano Babic
bdaa73a5b3 Add target to generate initial environment
The initial environment is linked to the u-boot binary. Modifying the
environment from User Space with the env tools requires that the tools
are always built together with the bootloader to be sure that they
contain the initial environment in case no environment is stored into
persistent storage or when a board boots with just the default
environment. This makes difficult for distros to provide a general
package to access the environment. A simpler way is if the tools are
generic for all boards and a configuration file is given to provide the
initial environment.

The patch just generates the initial environment by extracting it from
the compiled object. This file can then be used for tools in user space
to initialize the environment.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2019-04-22 18:13:23 -04:00
Michal Simek
c8c5e2b84d Makefile: Prioritize external dtb if defined
Prioritize external dtb if its passed via EXT_DTB
than the dtb that was built in the tree. With this
patch it appends the specified external dtb to
the u-boot image.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-16 11:52:02 +02:00
Stefan Roese
29a6fa7756 Makefile: Correct logic for DM_SCSI + unconverted drivers check
When checking for boards that are enabling a SATA driver that isn't
converted to DM yet we need to be sure to not also trip over boards that
do set CONFIG_AHCI & CONFIG_BLK by itself, as that is not a bug.

This was detected when converting the Armada XP SATA driver sata_mv.c
to DM with AHCI & BLK support. This warning is still printed without
this patch applied here.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-12 07:04:18 +02:00
Tom Rini
f95fdf237d Merge branch 'master' of git://git.denx.de/u-boot-sh
- Various rmobile fixes
2019-04-11 14:29:22 -04:00
Marek Vasut
95f4bbd581 lib: fdt: Allow LZO and GZIP DT compression in U-Boot
Add required Kconfig symbols, Makefile bits and macro fixes in a
few places to support LZO and DT compression in U-Boot. This can
save a lot of space with multi-DTB fitImages.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2019-04-09 18:19:10 +02:00
Stefan Roese
9ea6f718eb Makefile: Add Kconfig option CONFIG_SPL_IMAGE to select the SPL binary
This patch adds the CONFIG_SPL_IMAGE option to select the SPL image that
shall be used to generate the combined SPL + U-Boot image. The default
value is the current value "spl/u-boot-spl.bin".

This patch also sets CONFIG_SPL_IMAGE to "spl/boot.bin" for AT91 targets
which use SPL NAND support (boot from NAND). For these build targets the
combined image "u-boot-with-spl.bin" is now automatically generated and
can be programmed into NAND as one single image (vs. SPL image and U-Boot
as 2 separate images).

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Andreas Bießmann <andreas@biessmann.org>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
2019-04-09 09:28:50 +03:00
Tom Rini
3c99166441 Prepare v2019.04
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-08 21:40:40 -04:00
默默
ab8fc41302 fix compile error on macOS Mojave 2019-04-03 10:26:46 -04:00