Commit Graph

47941 Commits

Author SHA1 Message Date
Eugeniy Paltsev
5aec2569a6 ARC: HSDK: Hang on panic
As HSDK is a development board it is better to hang on panic instead of
reset the board when panic occurs. That way we preserve a state of HW
for possibility to do post-mortem debug via JTAG.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-01-19 17:59:35 +03:00
Eugeniy Paltsev
19b10a42f6 ARC: Cache: Fix style violations reported by checkpatch
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-01-19 17:59:35 +03:00
Eugeniy Paltsev
b0146f9e29 ARC: Cache: Disable IOC by default
We'd like to keep IOC HW at the same state as t is right after reset when we
start Linux kernel so there will be no re-configuration of IOC on the go.

The point is U-Boot doesn't benefit a lot from IOC as it doesn't do a
lot of DMA operations especially on multiple cores simultaneously.

At the same time re-configuration of IOC in run-time might become quite
a tricky experience because we need to make sure there're no DMA
trannsactions in flight otherwise unexpected consequencses might affect
us much later and debugging those kinds of issues will be a real
nightmare.

That said let's make our life easier a little bit.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-01-19 17:59:34 +03:00
Eugeniy Paltsev
41cada4d24 ARC: ARCv2: Cache: Fixed operation without IOC
Previous SLC management implementation is broken. Seems like it was
never sufficiently tested probably because most of the time IOC was used
instead (i.e. no manual cache operations were done).

Now if we disable IOC in U-boot we'll get a lot of errors while using
DMA-enabled peripherals.

This time we fix it by substitution of broken per-line SLC operations
region operations as it is done in the Linux kernel (we took it from
v4.14 which is the latest stable as of today).

Among other things this implementation might be a bit faster because
instead of iteration over each and every cache line we're taking care
about entire region in one go.

Main changes:
 * Replaced __slc_line_op (per line operations) by __slc_rgn_op
   (region operations).

 * Reworked __slc_entire_op to get rid of __after_slc_op and
   __before_slc_op functions.
   Note flush fix (flush only instead of flush-n-inv when OP_FLUSH is
   used, see [1] for more details) is already incorporated here.

 * Added SLC invalidation to invalidate_icache_all().

 * Added (start >= end) check to invalidate_dcache_range() and
   flush_dcache_range() as some buggy drivers pass region start == end.

 * Added read-out of MMU BCR so we may know if PAE40 exists in HW and then
   act on a particular AUX regs accordingly.

[1] http://lists.infradead.org/pipermail/linux-snps-arc/2018-January/003357.html

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-01-19 17:59:34 +03:00
Tom Rini
086ebcd40e Merge git://git.denx.de/u-boot-fsl-qoriq 2018-01-17 13:48:35 -05:00
Ashish Kumar
2eb2dbd457 armv8: ls1088ardb: Add environment variable address location for QSPI-NOR
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-17 10:30:54 -08:00
Ashish Kumar
b500c92b70 env: sf: Add support for env init for QSPI-NOR
ENV variables can now be used before relocation.

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-17 10:30:54 -08:00
Ashish Kumar
134200a5ef armv8: ls1088: Add USB and PCI configs in SD-BOOT defconfig
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-17 10:30:54 -08:00
Yuantian Tang
ae02cf03bc arm64: ls1012a: Add sata distro boot support
Sata is equipped on ls1012a and can be a boot source. Add sata boot
support as an option if available.

Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-17 10:30:54 -08:00
Yuantian Tang
f216ef252e arm64: ls1046a: Add sata distro boot support
Sata is equipped on ls1046a and can be a boot source. Add sata boot
support as an option if available.

Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-17 10:30:54 -08:00
Tom Rini
1f0ce3259e freescale: Ensure common commands are not included in SPL binary
Both the "qixis_reset" and esbc_validate" commands can only be used in
full U-Boot so do not build them in SPL.  As part of this rework the
qixis code to declare things as static and make use of __weak for
function aliases.

Cc; York Sun <york.sun@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-17 10:30:45 -08:00
Tom Rini
3759df0c08 tools: Update python "help" tests to cope with "more" oddities
In some cases when "more" is told to page a given file it will prepend
the output with:
::::::::::::::
/PATH/TO/THE/FILE
::::::::::::::

And when this happens the output will not match the expected length.
Further, if we use a different pager we will instead fail the coverage
tests as we will not have 100% coverage.  Update the help test to remove
the string in question.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-16 16:15:25 -05:00
Tom Rini
23b4cf32b7 Merge git://git.denx.de/u-boot-i2c 2018-01-16 10:13:38 -05:00
Tom Rini
da54e7e5a9 Merge git://git.denx.de/u-boot-dm 2018-01-16 10:12:40 -05:00
Peng Fan
fb0128736b i2c: mxc_i2c: Use or operation
The operation should be OR, not BIT OR.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2018-01-16 06:59:39 +01:00
Peng Fan
34b0af8390 imx: mx7ulp: modify lpi2c seq number
Modify the lpi2c alias seq number to align with device.
Then no need to add 4 to get the device index.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-01-16 06:59:15 +01:00
Peng Fan
0074d4bf2d i2c: lpi2c: do not add 4 for bus seq
The number 4 is dedicated on i.MX7ULP, but lpi2c will be reused on i.MX8,
4 is not valid. The seq number could be configured by alias node.

The following patch will use i2c4 as the begin for i.MX7ULP.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-01-16 06:58:59 +01:00
Simon Glass
ed772fe79b test: Set the DTC environment variable
Set this to our own device-tree compiler since we know it is new enough to
run the tests.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-01-15 18:29:21 -07:00
Simon Glass
3ed0de31b4 dtoc: Allow DTC environment variable to provide path to dtc
The system device-tree compiler may not be new enough to run the tests we
use in U-Boot (e.g. with binman). Allow use of a DTC environment variable
to point to the correct dtc. If not defined, the dtc on the default PATH
is used.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-01-15 18:29:21 -07:00
Andre Przywara
4d4db83d18 armv8: secure firmware: fix incorrect unit address in node name
The DT spec demands a unit-address in a node name to match the "reg"
property in that node. Newer dtc versions will throw warnings if this is
not the case.
Remove the unit address from the config node name when U-Boot deals with
secure firmware FIT images.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2018-01-15 18:29:21 -07:00
Andre Przywara
2eda8e9aad tools: fix incorrect usage of DT node unit address
The DT spec demands a unit-address in a node name to match the "reg"
property in that node. Newer dtc versions will throw warnings if this is
not the case.
Correct the generated unit names when U-Boot's mkimage creates a FIT
image.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2018-01-15 18:29:21 -07:00
Andre Przywara
8837af154c sunxi: arm64: correct usage of DT node address in FIT generation
The DT spec demands a unit-address in a node name to match the "reg"
property in that node. Newer dtc versions will throw warnings if this is
not the case.
Adjust the FIT build script for 64-bit Allwinner boards to remove the
bogus addresses from the node names and avoid the warnings.
This avoids a warning with recent versions of the dtc tool.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2018-01-15 18:29:21 -07:00
Andre Przywara
b2267e8a22 fix incorrect usage of DT node unit address in comments
The DT spec demands a unit-address in a node name to match the "reg"
property in that node. Newer dtc versions will throw warnings if this is
not the case.
Fix all occurences in the tree where node names were mentioned in
comments, to not give bad examples to the reader.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2018-01-15 18:29:21 -07:00
Andre Przywara
971a54193c doc: fix incorrect usage of DT node unit address
The DT spec demands a unit-address in a node name to match the "reg"
property in that node. Newer dtc versions will throw warnings if this is
not the case.
Fix all occurences in various documentation files where this was not
observed, to not give bad examples to the reader.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2018-01-15 18:29:21 -07:00
Andre Przywara
b8790ebeec doc: FIT image: fix incorrect examples of DT node unit address
The DT spec demands a unit-address of a node name to match the "reg"
property in that node. Newer dtc versions will throw warnings if this is
not the case.
Fix all occurences in the FIT image example files where this was not
observed, to not give bad examples to the reader.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2018-01-15 18:29:21 -07:00
Andre Przywara
838404054e doc: FIT image: fix incorrect description of DT node unit address
The DT spec demands a unit-address in a node name to match the "reg"
property in that node. Newer dtc versions will throw warnings if this is
not the case.
Fix all occurences in the FIT image documentation files where this was not
observed, to not give bad examples to the reader.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2018-01-15 18:29:21 -07:00
Simon Glass
30d704c645 binman: Run code coverage tests
Binman has 100% test coverage for the code as it is at present. To
encourage it to stay that way, run the code-coverage test as part of the
normal U-Boot tests.

This is RFC because it requires the Python code coverage tools to be
available.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-01-15 18:29:21 -07:00
Simon Glass
f2d0778885 travis.yml: Run tests for tools
Run tests for the Python tools used by U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-01-15 18:29:21 -07:00
Simon Glass
00f6c800b5 test: Run dtoc tests
Update the test script to run the dtoc tests also.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-01-15 18:29:21 -07:00
Simon Glass
34ba7d777d test: Run buildman tests
Update the test script to run the buildman tests also.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-01-15 18:29:21 -07:00
Simon Glass
adb5b61612 test: Run patman tests
Update the test script to run the patman tests also.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-01-15 18:29:21 -07:00
Simon Glass
72d8172be0 test: Run binman tests
Update the test script to run the binman tests also.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-01-15 18:29:21 -07:00
Tom Rini
fdb6c3232f Merge git://git.denx.de/u-boot-net 2018-01-15 19:01:23 -05:00
Tom Rini
8e9801c283 Merge git://git.denx.de/u-boot-imx 2018-01-15 16:44:18 -05:00
Rob Clark
a970ee2257 db410c: on aarch64 the fdtfile is in per-vendor subdirectory
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-01-15 16:29:04 -05:00
Rob Clark
35bdd839d0 db410c: add reserved-memory node to dts
If lk lights up display and populates simple-framebuffer node, it will
also setup a reserved-memory node (needed by simplefb on linux).  But
it isn't clever enough to cope when the reserved-memory node is not
present.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-01-15 16:29:04 -05:00
Jorge Ramirez-Ortiz
9337dfb434 db410c: use the device tree parsed by the lk loader.
We dont need to keep copies of the properties that we are going to
fixup since we will be using the dtb provided by the firmware.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15 16:29:03 -05:00
Rob Clark
3b595da441 fdtdec: allow board to provide fdt for CONFIG_OF_SEPARATE
Similar to CONFIG_OF_BOARD, but in this case the fdt is still built by
u-boot build.  This allows the board to patch the fdt, etc.

In the specific case of dragonboard 410c, we pass the u-boot generated
fdt to the previous stage of bootloader (by embedding it in the
u-boot.img that is loaded by lk/aboot), which patches the fdt and passes
it back to u-boot.

Signed-off-by: Rob Clark <robdclark@gmail.com>
[trini: Update board_fdt_blob_setup #if check]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-15 16:29:03 -05:00
Jorge Ramirez-Ortiz
0689eb7470 db410c: replace reset driver with psci
this should be the norm for armv8 platforms.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15 16:29:03 -05:00
Jorge Ramirez-Ortiz
e2beb872f7 db410c: update wlan and bt mac addresses from firmware
The firmware that runs before u-boot modifies u-boot's device tree
adding the local-mac-address and local-bd-address properties for the
compatibles "qcom,wcnss-bt" and "qcom,wcnss-wlan".

This commit reads that firmware, retrieves the properties and fixups
the device tree that is passed to the kernel before booting.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15 16:29:03 -05:00
Jorge Ramirez-Ortiz
5bef39982a db410c: configs: increase gunzip buffer size for the kernel
the kernel fails to boot when it goes over the limit.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15 16:29:03 -05:00
Jorge Ramirez-Ortiz
100fb0bd99 db820c: stop autoboot when vol- pressed
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15 16:29:02 -05:00
Jorge Ramirez-Ortiz
e0cc0b6c6d db820c: enable pmic gpios for pm8994
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15 16:29:02 -05:00
Jorge Ramirez-Ortiz
4b684a6b82 db820c: add qualcomm dragonboard 820C support
This commit adds support for 96Boards Dragonboard820C.

The board is based on APQ8086 Qualcomm Soc, complying with the
96Boards specification.

Features
 - 4x Kyro CPU (64 bit) up to 2.15GHz
 - USB2.0
 - USB3.0
 - ISP
 - Qualcomm Hexagon DSP
 - SD 3.0 (UHS-I)
 - UFS 2.0
 - Qualcomm Adreno 530 GPU
 - GPS
 - BT 4.2
 - Wi-Fi 2.4GHz, 5GHz (802.11ac)
 - PCIe 2.0
 - MIPI-CSI, MIPI-DSI
 - I2S

U-Boot boots chained from LK (LK implements the fastboot protocol) in
64-bit mode.

For detailed build instructions see readme.txt in the board directory.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15 16:29:02 -05:00
Jorge Ramirez-Ortiz
7c75f7f1b2 arm: mach-snapdragon: refactor clock driver
In preparation to add support for the Dragonboard820c (APQ8096),
refactor the current Snapdragon clock driver.

No new functionality has been added.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15 16:29:02 -05:00
Jorge Ramirez-Ortiz
1087a7942c env: enable accessing the environment in an EXT4 partition
For example to store the environment in a file named "/uboot.env" in MMC
"0", where partition "1" contains the EXT4 filesystem, the following
configs should be added to the board's default config:

  CONFIG_ENV_IS_IN_EXT4=y
  CONFIG_ENV_EXT4_DEVICE_AND_PART="0:1"
  CONFIG_ENV_EXT4_FILE="/uboot.env"
  CONFIG_ENV_EXT4_INTERFACE="mmc"

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
[trini: Fix some line over 80 chars issues]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-15 16:28:57 -05:00
Tom Rini
68ae7772af arm: ls1021atwr: Rework local commands to not be included in SPL
Move some of the code for the "lane_bank" and "cpld" code local
commands so that they are not built for SPL as they can only be
used in full U-Boot.  This means we can mark a few functions as
static as well now.

Cc: Alison Wang <alison.wang@freescale.com>
Cc: Sumit Garg <sumit.garg@nxp.com>
Cc: York Sun <york.sun@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Alison Wang <alison.wang@nxp.com>
Tested-by: Alison Wang <alison.wang@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-15 12:44:24 -08:00
Tom Rini
3a72a0efcc powerpc: P1010RDB: Rework local command to not be included in SPL
Add a CONFIG_SPL_BUILD guard around the code for the "mux" command so
it is not included in SPL.

Cc: Qiang Zhao <qiang.zhao@nxp.com>
Cc: York Sun <york.sun@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Reviewed-by: Qiang Zhao <qiang.zhao@nxp.com>
2018-01-15 12:44:24 -08:00
Priyanka Jain
da28a03ed4 board/ls2081ard: Correct code to get QMAP value in checkboard
QMAP value contains information about QSPI chip-selects. These bits
are used to display information of boot device in checkboard()
function.

QMAP value is stored in most significant 3-bits of 8-bit register
brdcfg[0] in Qixis, this patch corrects code to get QMAP bits using
below logic:
	(brdcfg[0] >> 5) & 0x7

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-15 12:44:23 -08:00
Priyanka Jain
f436fbfeb1 board/ls2081ardb: Update board related prints
Remove Board Arch print as its value is always constant '1' and does
not contain any important information to display during boot.
Add print to display Board FPGA version.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-15 12:44:23 -08:00