Commit Graph

15045 Commits

Author SHA1 Message Date
Pascal Linder
f169653483 km/spi: add weak functions to kirkwood_spi driver (DM part)
The weak functions, known from the legacy code, are added to the DM part
as well. For this purpose, the release operation first needs to be
implemented. KM Kirkwood boards will overwrite those weak functions to
change the MPP configuration when claiming/releasing the bus, because the
hardware pins are shared between the SPI NOR and NAND devices.

Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch>
Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-07-11 10:58:03 +02:00
Tom Rini
ef8b7e045e Merge https://gitlab.denx.de/u-boot/custodians/u-boot-i2c 2019-07-10 13:51:53 -04:00
Tom Rini
a52f1fe408 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-ubi
[trini: Migrate sama5d27_som1_ek_qspiflash/sama5d2_xplained_qspiflash
        for CONFIG_ENV_SECT_SIZE]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-10 13:18:54 -04:00
Tom Rini
b4944e2574 First set of u-boot-atmel features and fixes for 2019.10 cycle
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdJEZEAAoJEB6zHgIOrC/I+LAH/jUDQpF5I68h0ZFGm3xoyGhm
 3CSv8viOm/kL+GLubjnv4cwAp8N8VRpeJekz0Jt1Xp8C6OIgtnJ2Fln72KD+Z0IC
 Rq7ByRS16iq4b6IUDRZObE4Jzxmf7rXU3jr0+/vd/en7kxVlvA9+Gsffs3OTGxC7
 z9PysRZPBMH/smIPXdEQxYifnbpDG4fmfGcUWKrYfkB0Kq6Ep98Ia/gXNCY8XJ/A
 sbNQGjJWJZWXS/TDetcC2VikssJ+yNFF34uzV+HD5Y3DW6ywLhuoDOz1pg8RR36i
 YjcTCQz8lL/UVaUzrGUgPVAC3gdKY6J26GtV3vZavxBcmtGf0FhVtXO/tZc9AsY=
 =6G45
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-atmel-2019.10-a' of https://gitlab.denx.de/u-boot/custodians/u-boot-atmel

First set of u-boot-atmel features and fixes for 2019.10 cycle

This includes the Atmel QSPI driver and support for the at91 boards.
This is the port of the driver from Linux, mostly done by Tudor Ambarus.
2019-07-09 08:17:12 -04:00
Chuanhua Han
ef6c26d338 rtc: pcf2127: Fixed bug with rtc settings and getting error time
The previous pcf2127 RTC chip could not read and set the correct time.
When reading the data of internal registers, the read address was the
value of register plus 1. This is because this chip requires the host
to send a stop signal after setting the register address and before
reading the register data.

This patch sets the register address using dm_i2c_write and reads
the register data using the original dm_i2c_xfer in order to generate
a stop signal after the register address is set, and fixes the bug of
the original read and write time.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
2019-07-09 10:51:12 +02:00
Tudor Ambarus
24c8ff4684 spi: Add Atmel QuadSPI driver
Backport the driver from linux v5.1-rc5 and adapt it for u-boot.
Tested on sama5d2_xplained Rev B with mx25l25635e spi-nor flash.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-09 09:26:43 +03:00
Melin Tomas
d3826fb052 xilinx_xiic: Fix transfer initialisation
Prior to starting a new transfer, conditionally wait for bus to not
be busy.

Reinitialise controller as otherwise operation is not stable.
For reference, see linux kernel
commit 9656eeebf3f1 ("i2c: Revert i2c: xiic: Do not reset controller before every transfer")

hs: Fixed DOS line endings
    added missing '\n'
    Fixed git commit description style

Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
2019-07-09 07:02:11 +02:00
Melin Tomas
5324e8ef6c xilinx_xiic: Fix fill tx fifo loop
Comparison should be against the actual message length, not loop index.

len is used for stopping while loop, pos is position in message.
stop should be sent when entire message is sent, not when
len and pos meet.

hs: fixed DOS line endings

Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
2019-07-09 07:02:11 +02:00
Ley Foon Tan
2d1e879c79 i2c: designware: Get clock rate from clock DM
Get clock rate from clock DM if CONFIG_CLK is enabled.
Otherwise, uses IC_CLK define.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Acked-by: Marek Vasut <marex@denx.de>
2019-07-09 07:02:11 +02:00
Jun Chen
e3b93dcee8 i2c: designware_i2c: Restore enable state after set speed
Before calling __dw_i2c_set_bus_speed(),
the I2C could already be set as ether enable or disable,
we should restore the original setting instead of enable i2c anyway.

This patch fix a bug happened in init function:
    __dw_i2c_init(){
            /* Disable i2c */
            ...
            __dw_i2c_set_bus_speed(i2c_base, NULL, speed);
            writel(slaveaddr, &i2c_base->ic_sar);
            /* Enable i2c */
    }
In this case, enable i2c inside __dw_i2c_set_bus_speed() function
will cause ic_sar write fail.

Signed-off-by: Jun Chen <ptchentw@gmail.com>
2019-07-09 07:02:10 +02:00
Markus Klotzbuecher
a2257d378e ubispl: introduce separate CONFIG_UBI_SPL_SILENCE_MSG
This allows to silence ubi and ubispl individually.

Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Cc: Kyungmin Park <kmpark@infradead.org>
2019-07-09 07:00:26 +02:00
Hamish Guthrie
6ea31cce0b ubispl: add support for loading volumes by name
The motivation is to use the UBI atomic volume rename functionality to
allow double copy software updates on UBI. To that end the SPL is
configured to always load the same volume name (e.g. "u-boot"),
whereas a software updater always installs into the secondary volume
"u-boot_r". After successful installation, these two volume names are
switched.

This extension is protected by #ifdefs as it will somewhat slow down
loading of volumes by id. This is because the code needs to disable
the optimization of ignoring all volume ids which are not
to-be-loaded, since these can only be resolved after attaching.

This adds two vtbl related functions from Linux, which are taken from
the same kernel version as the current main U-Boot UBI code (Linux 4.2
64291f7db5bd8).

Signed-off-by: Hamish Guthrie <hamish.guthrie@kistler.com>
Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Cc: Kyungmin Park <kmpark@infradead.org>
2019-07-09 07:00:25 +02:00
Markus Klotzbuecher
5ebd3df64d ubi: fix UBI_SILENCE_MSG
- drop CONFIG_ prefix from kconfig entry
 - fix small compilation issue with CONFIG_UBI_SILENCE_MSG

Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Cc: Kyungmin Park <kmpark@infradead.org>
2019-07-09 07:00:23 +02:00
Tom Rini
f5e73a34ed Merge tag 'mmc-6-23' of https://github.com/MrVan/u-boot
- Pull in the series to split fsl_esdhc for i.MX/non-i.MX cleanly
2019-07-08 15:59:41 -04:00
Tom Rini
29e9363504 - fix pwm backlight
-----BEGIN PGP SIGNATURE-----
 
 iGwEABECACwWIQSC4hxrSoIUVfFO0kRM6ATMmsalXAUCXSEfKA4cYWd1c3RAZGVu
 eC5kZQAKCRBM6ATMmsalXDGrAJ0eQ5fZwSiITDCabbmQ5ExYa+tNtgCeKGKpAXpz
 STV1LiwLq2PYHW0B3bw=
 =0lJG
 -----END PGP SIGNATURE-----

Merge tag 'video-for-2019.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-video

- fix pwm backlight
2019-07-07 16:17:13 -04:00
Marc Dietrich
a2c4ef0977 video: backlight: fix pwm inversion
set_pwm() will always fail with -ENOSYS if pwm_ops set_invert() is
not implemented, leaving the backlight dark. Fix this by returning
no error if set_invert() is not implemented and no polarity change
is requested.

Fixes: 57e7775413 ("video: backlight: Parse PWM polarity cell")
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
2019-07-06 23:31:52 +02:00
Jean-Jacques Hiblot
3b83829ed6 usb: dwc3: Use UCLASS_NOP instead of UCLASS_MISC for the DWC3 generic glue
dwc3-generic has been broken since MISC uclass has been modified to scan DT
sub-nodes after bind.
Fixing it by a using the no-op uclass.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-05 14:19:41 +02:00
Jean-Jacques Hiblot
07e33711fe dm: Add a No-op uclass
This uclass is intended for devices that do not need any features from the
uclass, including binding children.
This will typically be used by devices that are used to bind child devices
but do not use dm_scan_fdt_dev() to do it. That is for example the case of
several USB wrappers that have 2 child devices (1 for device and 1 for
host) but bind only one at a any given time.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-05 14:19:41 +02:00
Jean-Jacques Hiblot
e445d46651 usb: dwc3-generic: remove dm_scan_fdt_dev() from the remove() callback
There is simply no reason to do that here.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-07-05 14:19:40 +02:00
Marek Vasut
501547cec1 usb: ehci-mx6: Fix bus enumeration for DM case
The EHCI iMX6 driver is only partly converted to DT probing and
still uses a tremendous amount of hard-coded addresses. Worse,
the driver uses hard-coded SoC-model-specific base addresses, which
are derived from values protected by SoC-specific macros, hence the
driver is also compiled for a specific SoC model. Even worse, the
driver depends on specific sequential indexing of the controllers,
from which it derives offsets in the PHY and ANATOP register sets.

However, when the driver is probed from DT, the indexing is not
correct. In fact, each controller has index 0. This patch derives
the index for DT probing case from the controller base addresses,
which is not the way this should be done, however it is the least
intrusive approach, favorable this close to release.

The necessary steps to convert this driver fully to DT probing are
described inside the patch, however this should be done in the next
release and depends on iMX clock driver patches.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Abel Vesa <abel.vesa@nxp.com>
Cc: Adam Ford <aford173@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Ludwig Zenz <lzenz@dh-electronics.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Vagrant Cascadian <vagrant@debian.org>
2019-07-05 14:19:40 +02:00
Kunihiko Hayashi
d5381853ad pinctrl: uniphier: Add SPI pin-mux settings
Add pin-mux settings for SPI controller.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-29 22:21:26 +09:00
Tom Rini
0352e878d2 Fixes for 2019.07
- menlo board
 - allow SDB on Sabre
 - HAB for mx6sl
 - apalis board
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl0VwBcPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3k4AL/iaMEhY5e43krMSmlnWDfS2DsTVpyUBX1Q7X
 JHkuKQ8iH3bBSquwLNFju2hGNK8whCHfsIB5QgSh4uK3JIzWAh+/5TCGXbPDkGMJ
 PI/hyxKy2EB245SMshcJMHbyLK6PeHi4V/WA4WyY2c91Dz/DNx7UhMZOlFm8wyMl
 TwDCwtlqHodz0tXKUziCjSqTfxj7WSThwuyQ0SEHAccglM1MzM1JHq1RcdV7Pjdh
 bDpMC0rjcxYl5MM7gIig5OMtx+26HgP6JM+QfeoEuBm0PbhxV6ZFyHlafb8W/ba0
 SjzMWIknZWYA9GTAkdUgN+E0ChZVID0oSVoVh51eKiOG1z+LpkJEKE7xsaCAeBiQ
 BupLRgd0tBtqVK345EFDCy5UkYrnkLOnI+3JQNZ9bxBoPmKAf6wvhqa9Jf3bc+rP
 iSYh9Lm3sWVlXKcLR4ltS39D48OT8GZqun8zLpZkwpAWxRMuFvR+R7Q+VMVKmEF2
 1dn3EJhMsvbmTj0lYRp+ObEEpJDL9A==
 =DFoX
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20190628' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

Fixes for 2019.07

- menlo board
- allow SDB on Sabre
- HAB for mx6sl
- apalis board
2019-06-28 08:00:22 -04:00
Frieder Schrempf
2c72ead738 usb: gadget: f_sdp: Allow SPL to load and boot FIT via SDP
Add support for loading u-boot FIT images over the USB SDP protocol in
the SPL

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
[Various build fixes]
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Tested-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Lukasz Majewski <lukma@denx.de>
2019-06-27 13:50:28 +02:00
Yangbo Lu
5053da2e4a mmc: fsl_esdhc_imx: drop useless code
Dropped useless code for i.MX eSDHC driver.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-06-23 14:18:48 +08:00
Yangbo Lu
4d8ff42e46 mmc: fsl_esdhc: drop i.MX code
Dropped i.MX code which couldn't be reused.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
2019-06-23 14:18:42 +08:00
Yangbo Lu
fa33d20749 mmc: split fsl_esdhc driver for i.MX
The fsl_esdhc driver was for Freescale eSDHC on MPC83XX/MPC85XX
initially. The later QoriQ series PowerPC processors (which were
evolutions of MPC83XX/MPC85XX), QorIQ series ARM processors, and
i.MX series processors were using this driver for their eSDHCs too.

For the two series processors, the eSDHCs are becoming more and
more different. We should have split it into two drivers, like them
(sdhci-of-esdhc.c/sdhci-esdhc-imx.c) in linux kernel.

This patch is just to create a fsl_esdhc_imx driver which is a copy
of fsl_esdhc driver for i.MX processors. We will convert i.MX processors
to use fsl_esdhc_imx, and clean up the two drivers separately in the
future patches.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
2019-06-23 14:15:31 +08:00
Tom Rini
5eea874b5e Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86
- boot failure fix for Intel edison
- tangier wdt conversion to driver model
2019-06-22 12:09:33 -04:00
Andy Shevchenko
c974a3d155 watchdog: tangier: Convert to use WDT class
Convert legacy driver to use watchdog class.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-06-22 22:27:13 +08:00
Andy Shevchenko
8b295a2026 watchdog: tangier: Replace unused constant with a comment
The default timeout value had been left in order to leave some traces
about default setup of watchdog done by firmware.

For better understanding and compiler burden, replace it with a comment.

Suggested-by: Stefan Roese <sr@denx.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-06-22 22:26:22 +08:00
Bin Meng
5fafd7e35f pci: Avoid assigning PCI resources that are below 0x1000
commit b7598a43f2 ("[PATCH] Avoid assigning PCI resources from
zero address") only moved the bus lower address to 0x1000 if the
given bus start address is zero. The comment said 0x1000 is a
reasonable starting value, hence we'd better apply the same
adjustment when the given bus start address is below 0x1000.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-06-21 10:07:11 -04:00
Shannon Barber
2bc1821e86 Fix watchdog timeout setup for mt7623
Signed-off-by: Shannon Barber <sbarber@dataspeedinc.com>
2019-06-20 10:57:08 -04:00
Joel Stanley
894e235f14 aspeed/watchdog: Correct timeout value
The driver was using milliseconds and programming it into a register
which takes ticks of the watchdog clock, which runs at 1MHz. This meant
we were off by 1000 with the desired value.

When 06985289d4 ("watchdog: Implement generic watchdog_reset()
version") was added the aspeed board would leave the watchdog running,
causing it to bite before u-boot was done.

Discovered by booting in qemu:

  $ qemu-system-arm -M ast2500-evb -drive file=test.img,format=raw,if=mtd -nographic -no-reboot -d cpu_reset

  U-Boot 2019.07-rc3-00091-g2253e40caef5 (Jun 06 2019 - 16:53:23 +0930)

  Model: Aspeed BMC
  DRAM:  496 MiB
  WDT:   Started with servicing (60s timeout)
  MMC:
  In:    serial@1e784000
  Out:   serial@1e784000
  Err:   serial@1e784000
  Watchdog timer expired.

Fixes: 06985289d4 ("watchdog: Implement generic watchdog_reset() version")
Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-06-20 10:57:08 -04:00
Tom Rini
f643fb9f4c Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx
- PCIe driver change to support DM model
- T2080QDS migrated to use PCIe DM model
2019-06-20 09:14:35 -04:00
Tom Rini
e8c185bb15 _ Update STM32MP entry in MAINTAINERS
_ Handle correctly binding for g-tx-fifo-size for USB DWC2 driver
 _ Fix trusted STM32MP1 defconfig with correct ethernet driver
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCgA1FiEEXyrViUccKBz9c35Jysd4L3sz/6YFAl0KUq0XHHBhdHJpY2Uu
 Y2hvdGFyZEBzdC5jb20ACgkQysd4L3sz/6Y6ZA//fidCjjfPkJgV0lQJeWJDzaoF
 VOtqpSLj9of5SxCfeXV5Ts1ngnSrwRDpGstuER2l7icFq24XnrtaBBGhlGVZ0wvJ
 ft5VDZZo0VehoxN1yMlGrZ9vCNx5V8v5VJVLDneZdDSFIAJD5aioIe5S9EOfJz6F
 oe9uYXxArDNbzuw6YC7de7RDmMNl7pR5DDhaPMuWr12+T1FxzEVUNh0ohWhJxqL8
 tmieg0kDyBKWHSgna8G1JhIJfGmdxsj2RR7nazPt+OduqRuFE24VuEFRvsjEjhmI
 AiUhb4UpGOtXHtP6g4o2q78t77Quu0SqI6RJJEOcsAF7jGnwrcjjQe6W4JDVy5f5
 zh+SObj2frgaMc0s0hM6/StlZQJp6N09FFjn8G+T9RupL/lKeqH+xnJT5asZJdso
 mLyBbxhQhaGBP2QyUNB02t9aiQeOYJ1jCJCC+/iORQ6jPK+qNboTdPmTGfpbR14v
 /IgVbIsOWE6eKu5u/ac2TXZBkEPOLX6wCh6C0qTGLEEp9dh1Y63/bETy/ZpBqu55
 YTLXVVRK2l9cRXZI8CAyBRBNk6VrdAQq+e48A0dvVWvAMDFalr/54JustzEh5VKs
 oNe+oGRTZt/S3MYCnMjvhcaPZOqAxt+V7MQ8yuubn1TSV29ygcilzHySK0IaT2Cj
 WXD/pNKx+h8cu46i+nE=
 =wz3G
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20190619' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm

- Update STM32MP entry in MAINTAINERS
- Handle correctly binding for g-tx-fifo-size for USB DWC2 driver
- Fix trusted STM32MP1 defconfig with correct ethernet driver
2019-06-20 09:14:03 -04:00
Tom Rini
64fabed971 Merge tag 'mmc-6-19' of https://github.com/MrVan/u-boot
- Avoid HS400 mode when accessing boot partitions
2019-06-20 09:13:27 -04:00
Hou Zhiqiang
b89e3d9250 dm: pci: add Freescale PowerPC PCIe driver
Add PCIe DM driver for Freescale PowerPC PCIe controllers.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-20 10:44:45 +05:30
Tom Rini
63a4585791 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- LS1046AFRWY support
- USB errata fix and secure boot defconfig support for LS1028A
- Enabled SDHC and SATA for LX2160
- LS1046A serdes fixes
- other minor fixes
2019-06-19 14:01:11 -04:00
Patrick Delaunay
7c65468346 usb: dwc2: allow peripheral mode for OTG configuration
Allow device mode in DWC2 driver when device tree select the dr_mode
"peripheral" or "otg".

The device mode is not allowed when dr_mode = "host" in device tree.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2019-06-19 16:56:11 +02:00
Patrick Delaunay
7350a75b51 usb: dwc2: correctly handle binding for g-tx-fifo-size
Manage g-tx-fifo-size as a array as specify in the binding.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2019-06-19 16:56:11 +02:00
Yangbo Lu
66fa035b55 mmc: fsl_esdhc: fix probe issue without CONFIG_BLK enabled
u-boot is trying to make CONFIG_BLK as a hard requirement
for DM_MMC. But now it's still not.

config BLK
	bool "Support block devices"
	depends on DM
	default y if DM_MMC

When fsl_esdhc driver was reworked for DM_MMC support, DM_MMC
without CONFIG_BLK enabled wasn't considered. This patch is to
fix probe issue without CONFIG_BLK enabled.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:56 +05:30
Marek Vasut
72119aa14a mmc: Avoid HS400 mode when accessing boot partitions
U-Boot code currently only applies this restriction to HS200 mode,
extend this to HS400 mode as well.

Currently U-Boot code not support accessing boot partition in HS200/400
mode. This needs more check.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Jean-Jacques Hiblot <jjhiblot@ti.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-06-19 13:53:59 +08:00
Tom Rini
c3f43185ee Merge branch 'master' of git://git.denx.de/u-boot-spi
- Drop zipitz2 board (Tom)
- Add DEPRECATED option (Tom)
- Mark legacy or non-dm drivers as DEPRECATED (Jagan)
2019-06-17 11:32:22 -04:00
Tom Rini
c3e8aa1a9e Merge branch 'master' of git://git.denx.de/u-boot-usb
- Assorted gadget fixes
2019-06-17 11:27:21 -04:00
Igor Opaniuk
220f655176 fastboot: Check if partition really exist in getvar_has_slot()
Currently getvar_has_slot() invocation for "boot" and "system"
partitions always returns affirmative response regardless the fact of
existence of these partitions, which leads to impossibility to flash them
on old non-A/B AOSP setups, where _a/_b suffixes aren't used:

$ fastboot flash boot boot.img
Sending 'boot__a' (11301 KB)    OKAY [  0.451s]
Writing 'boot__a'               FAILED (remote: 'cannot find partition')
fastboot: error: Command failed

Although partition layout is:
-> part list mmc 0
Partition Map for MMC device 0  --   Partition Type: EFI

Part	Start LBA	End LBA		Name
	Attributes
	Type GUID
	Partition GUID
  1	0x00000800	0x000107ff	"boot"
	attrs:	0x0000000000000000
	type:	ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
	guid:	ea2e2470-db4a-d646-b828-10167f736d63
  2	0x00010800	0x000127ff	"environment"
	attrs:	0x0000000000000000
	type:	ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
	guid:	10a819d2-6004-3d48-bd87-114e2a796db9
  3	0x00012800	0x0001a7ff	"recovery"
	attrs:	0x0000000000000000
	type:	ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
	guid:	9ea116e4-8a34-0c48-8cf5-2fe9480f56cd
  4	0x0001a800	0x0031a7ff	"system"
	attrs:	0x0000000000000000
......

This patch adds checks of existence for requested partitions
on eMMC/NAND.

Fixes: f73a7df984 ("net: fastboot: Merge AOSP UDP fastboot")
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2019-06-14 12:39:54 +02:00
Sam Protsenko
f23a87d581 fastboot: getvar: Refactor fastboot_*_get_part_info() usage
Extract fastboot_*_get_part_info() usage for MMC and NAND into
getvar_get_part_info() function, as it will be needed further in other
functions. This way we can avoid code duplication and mess with
preprocessor directives across all points of usage.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-06-14 12:39:54 +02:00
Sam Protsenko
cacb03e490 fastboot: Use const qualifier for char *part_name
In fastboot_*_get_part_info() functions we can use stronger typing by
expecting const strings.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-06-14 12:39:54 +02:00
Sam Protsenko
97a0c6ff57 fastboot: Fix slot names reported by getvar
In commit [1] fastboot tool was changed w.r.t. new A/B specification [2],
and now we should report slot names in "a" format instead of "_a".
Latter is now considered legacy and we shouldn't rely on that anymore.

Due to this one can observe next error with recent fastboot tool:

    $ fastboot flash boot boot.img
    Sending 'boot__a' (11301 KB)
        OKAY [  0.451s]
    Writing 'boot__a'
        FAILED (remote: 'cannot find partition')
    fastboot: error: Command failed

Let's use new slot format in order to fix double underscores "__" and to
be in sync with AOSP master.

[1] 8091947847
[2] https://source.android.com/devices/tech/ota/ab/ab_implement#partitions

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2019-06-14 12:39:54 +02:00
Jagan Teki
ea73ec08d1 spi: Kconfig: Mark LPC32XX_SSP as DEPRECATED
Mark LPC32XX_SSP as DEPRECATED, this so the resulting build shows
warning for deprecated configuration enabled and associated code
will remove in v2019.07 release.

Cc: Albert ARIBAUD <albert.aribaud@3adev.fr>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Sylvain Lemieux <slemieux@tycoint.com>
[trini: Switch to DEPRECATED]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-13 12:51:06 +05:30
Jagan Teki
32f70d67c7 spi: Kconfig: Mark SOFT_SPI as DEPRECATED
Mark SOFT_SPI as DEPRECATED, this so the resulting build shows
warning for deprecated configuration enabled and associated code
will remove in v2019.07 release.

Cc: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[trini: Switch to DEPRECATED]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-13 12:51:06 +05:30
Jagan Teki
e124759289 spi: Kconfig: Mark SH_SPI as DEPRECATED
Mark SH_SPI as DEPRECATED, this so the resulting build shows
warning for a deprecated configuration enabled and associated code
will remove in v2019.07 release.

Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[trini: Switch to DEPRECATED]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-13 12:51:06 +05:30