Commit Graph

12437 Commits

Author SHA1 Message Date
Mike Frysinger
493c360721 sf: use print_size() for sector_size output
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-12 02:30:25 -04:00
Richard Retanubun
334eb4b02f cmd_sf: add handler for +len arg for erase command
This patch adds [+]len handler for the erase command that will
automatically round up the requested erase length to the flash's
sector_size.

Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-12 02:30:25 -04:00
Mike Frysinger
f8f0757dcb sf: localize erase funcs
No need for these to be exported as they are only accessed indirectly
via function pointers.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-12 02:15:56 -04:00
Mike Frysinger
c5910874ba sf: sst: setup read func
The previous unification patch missed setting up the sst read func.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-12 02:15:54 -04:00
Richard Retanubun
4e6a515899 sf: add struct spi_flash.sector_size parameter
This patch adds a new member to struct spi_flash (u16 sector_size)
and updates the spi flash drivers to start populating it.

This parameter can be used by spi flash commands that need to round
up units of operation to the flash's sector_size.

Having this number in one place also allows duplicated code to be
further collapsed into one common location (such as erase parameter
and the detected message).

Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-12 02:15:37 -04:00
Mike Frysinger
cdb6a00fb8 sf: atmel: undo unification of status polling
The AT45 flashes are completely different (at the command set and
status register level) from all other SPI flashes, so we can't unify
their logic with common code.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-11 23:41:09 -04:00
Mike Frysinger
192b639ecc sf: punt unused spi_flash_region struct
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-11 23:40:59 -04:00
Macpaul Lin
9096963c72 ftwdt010_wdt: support faraday ftwdt010 watchdog
Faraday ftwdt010 watchdog is an architecture independant
watchdog. It is usually used in SoC chip design.

Signed-off-by: Macpaul Lin <macpaul@andestech.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-04-11 22:47:52 +02:00
Eric Bénard
ee986e2a7d mp2usb: remove board support
this board was cancelled long time ago so remove it as it won't
be maintained anymore

Signed-off-by: Eric Bnard <eric@eukrea.com>
2011-04-11 22:44:02 +02:00
Andreas Huber
91a3c14cd0 ppc, mgcoge: add DIP switch detection
This reads the DIP switch on mgcoge. The DIP switch is connected to
the BFTICU (0x40000089) FPGA. If the DIP switch is set the environment
variable 'actual_bank' is set to 0 and starts the SW in bank0.

Signed-off-by: Andreas Huber <andreas.huber@keymile.com>
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
2011-04-11 22:41:37 +02:00
Holger Brunck
086f09150d arm, keymile: remove unneeded code
On first HW versions the BOCO FPGA was behind a MUX device. These
HW versions are not supported anymore. And therefore this code can
be removed, it is already unused.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
2011-04-11 22:39:25 +02:00
Roy Zang
2c2668f971 Net: Add Intel E1000 82574L PCIe card support
Add Intel E1000 82574L PCIe card support. Test on MPC8544DS
and MPC8572 board.
Add the missing contact information for future support.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-11 22:20:13 +02:00
Joakim Tjernlund
39768f7715 PowerPC: Add support for -msingle-pic-base
-msingle-pic-base is a new gcc option for ppc and
it reduces the size of my u-boot with 6-8 KB.
While at it, add -fno-jump-tables too to save a
few more bytes.

-msingle-pic-base will be in gcc 4.6, however
backported patches are available at
http://bugs.gentoo.org/show_bug.cgi?id=347281

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2011-04-11 21:38:47 +02:00
Joakim Tjernlund
33ee4c9233 PowerPC: Move -fPIC flag to common place
The -fPIC flag belongs with -mrelocatable, move it there.
Also change -fPIC to -fpic as this produces smaller
binaries.
However, currently -mrelocatable promotes -fpic to -fPIC, a
fix for this is in upcoming gcc 4.6 or you can apply this small
patch to gcc:

diff --git a/gcc/config/rs6000/sysv4.h b/gcc/config/rs6000/sysv4.h
index 8da8410..e4b8280 100644
--- a/gcc/config/rs6000/sysv4.h
+++ b/gcc/config/rs6000/sysv4.h
@@ -227,7 +227,8 @@ do {									\
     }									\
 									\
   else if (TARGET_RELOCATABLE)						\
-    flag_pic = 2;							\
+    if (!flag_pic)							\
+      flag_pic = 2;							\
 } while (0)

 #ifndef RS6000_BI_ARCH
--

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2011-04-11 21:36:41 +02:00
Ben Gardiner
7d2fade7b1 ea20: fix undefined PHY_* errors
This patch fixes ea20 after 8ef583a035 where
the u-boot custom PHY_ macros were replaced with those of linux/mii.h MII_
definitions except in the RMII support for davinci_emac. Probably also due to
the merge path of changes in 2010.12.

Signed-off-by: Ben Gardiner<bengardiner@nanometrics.ca>
CC: Mike Frysinger <vapier@gentoo.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-04-11 21:28:44 +02:00
Ben Gardiner
fa9cd788bc ea20: fix libea20.o not found
This patch fixes ea20 after commit 6d8962e814
where $(obj)lib$(BOARD).a was changed to $(obj)lib$(BOARD).o in almost all the
Makefiles except ea20, probably due to merge path of the changes in 2010.12.

Signed-off-by: Ben Gardiner<bengardiner@nanometrics.ca>
CC: Sebastien Carlier <sebastien.carlier@gmail.com>
Acked-by : Stefano Babic <sbabic@denx.de>
2011-04-11 21:26:48 +02:00
Lei Wen
02cf345973 bootm: replace blob_start with image_start
For uImage always has a 64 bytes header, we couldn't expect to do
the xip from the header but should xip from the image start.

The latter logic in that section is also move the image from image_start
to the load address, so sync this logic to the xip operation.

Signed-off-by: Lei Wen <leiwen@marvell.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-04-11 21:10:44 +02:00
Mike Frysinger
a4c3b40b33 sf: unify read functions
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-11 21:00:55 +02:00
Mike Frysinger
e7b44eddbe sf: unify erase functions
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-11 21:00:54 +02:00
Mike Frysinger
6163045bcd sf: unify status polling for ready bit
All of the spi flash drivers implement the status register polling for
detecting the device ready state, so unify them all in a new helper
function -- spi_flash_wait_ready.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-11 21:00:53 +02:00
Mike Frysinger
000044d8bf sf: unify read/write helpers
These functions largely do the same exact thing, so unify them all
into one basic function.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-11 21:00:49 +02:00
Wolfgang Denk
17e967b3df Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx 2011-04-10 21:24:40 +02:00
Wolfgang Denk
4fd783d63f Merge branch 'next' of git://git.denx.de/u-boot-nios 2011-04-10 21:20:28 +02:00
Wolfgang Denk
a8708a8634 Merge branch 'master' of git://git.denx.de/u-boot-blackfin 2011-04-10 21:06:27 +02:00
Fabian Cenedese
c1c087b753 powerpc/85xx: Removed clearing of L2-as-SRAM
Removed clearing of L2 cache as SRAM as it is not necessary without ECC.
This also speeds up the booting process.

Signed-off-by: Fabian Cenedese <cenedese@indel.ch>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-10 11:24:21 -05:00
Priyanka Jain
32c8cfb23c fsl_esdhc: Deal with watermark level register related changes
P1010 and P1014 has v2.3 version of FSL eSDHC controller in which watermark
level register description has been changed:

9-15 bits represent WR_WML[0:6], Max value = 128 represented by 0x00
25-31 bits represent RD_WML[0:6], Max value = 128 represented by 0x00

Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: Poonam Aggrwal <Poonam.Aggrwal@freescale.com>
Tested-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-10 11:17:55 -05:00
Shaohui Xie
2a9fab82b7 powerpc/85xx: Add PBL boot from SPI flash support on P4080DS
PBL(pre-boot loader): SPI flash used as RCW(Reset Configuration Word) and
PBI(pre-boot initialization) source, CPC(CoreNet Platform Cache) used as
1M SRAM where PBL will copy whole U-BOOT image to, U-boot can boot from
CPC after PBL completes RCW and PBI phases.

Signed-off-by: Chunhe Lan <b25806@freescale.com>
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Shaohui Xie <b21989@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-10 11:17:55 -05:00
Jiang Yutang
f378017ffa powerpc/85xx: Update default hwconfig on P1022DS
Set default configuration to have SDHC controller enabled,
AUDIO enabled(codec clock sources is 12MHz) and disable TDM.

Signed-off-by: Jiang Yutang <b14898@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-10 11:17:55 -05:00
Jiang Yutang
b93f81a418 powerpc/85xx: Add support usb2/etsec and tdm/audio pin multiplex on P1022DS
For soc which have pin multiplex relation, some of them can't enable
simultaneously. This patch add environment var 'hwconfig' content
defination for them. you can enable some one function by setting
environment var 'hwconfig' content and reset board. Detail setting
please refer doc/README.p1022ds

Signed-off-by: Jiang Yutang <b14898@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-10 11:17:55 -05:00
Jiang Yutang
218a758fb9 powerpc/85xx: Enable support for ATI graphics cards on P1022DS
Make the support for ATI graphics cards mutually exclusive with DIU.

Signed-off-by: Jiang Yutang <b14898@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-10 11:17:55 -05:00
Timur Tabi
314b3ff1a6 p4080ds: remove rev1-specific code for the SERDES8 erratum
Remove the SERDES8 erratum work-around code that only applied to P4080
rev1, which is not supported by this version of U-Boot.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-10 11:17:48 -05:00
Timur Tabi
6c7a29a5b4 p4080ds: add README.p4080ds which documents the "serdes" hwconfig option
Add documentation for the "serdes" hwconfig option, which is used to
specify the status of SerDes banks two and three for the SERDES8 erratum
work-around.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-10 11:17:32 -05:00
Kumar Gala
15321c9c39 powerpc/85xx: Drop CONFIG_VIDEO support on corenet_ds boards
We don't really ever use Video cards on corenet_ds style boards and its
bloating our image which is close the its max size.  Drop support and
also kill some defines for non-PNP PCI which we never use.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-09 12:36:09 -05:00
Thomas Chou
030103d780 nios2: reset cfi flash before reading env
Flash might be in unknown state when u-boot is started with jtag.
And got wrong env data. So reset it in board early init.

We cannot use generic cfi flash routines, because flash_init() is
not run yet.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2011-04-08 09:02:27 -04:00
Matthew McClintock
a3055c587d powerpc/85xx: rename NAND prefixes to CONFIG_SYS
renaming 85xx define CONFIG_NAND_OR_PRELIM to CONFIG_SYS_NAND_OR_PRELIM
and CONFIG_NAND_BR_PRELIM to CONFIG_SYS_NAND_BR_PRELIM to use the more
appropriate CONFIG_SYS prefix as well as be consistent with 83xx.

Signed-off-by: Matthew McClintock <msm@freescale.com>
cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-08 02:50:57 -05:00
Mike Frysinger
d1f3ac9ee4 Blackfin: bf526-ezbrd: get MAC from flash
The MAC address is stored in the last flash sector rather than OTP.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:27 -04:00
Mike Frysinger
03feb8ed2e Blackfin: bf518f-ezbrd: get MAC from flash
The MAC address is stored in the last flash sector rather than OTP.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:27 -04:00
Mike Frysinger
d413dbc990 Blackfin: bf548-ezkit: move env sector
U-Boot itself takes up more than 0x40000 bytes, so we can't use that
sector for the environment.  Move it down a page.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:27 -04:00
Kyle Moffett
eed1a7b1cf Blackfin: replace "bfin_reset_or_hang()" with "panic()"
The bfin_reset_or_hang function unnecessarily duplicates the panic()
logic based on CONFIG_PANIC_HANG.

This patch deletes 20 lines of code and just calls panic() instead.
This also makes the following generic-restart conversion patch simpler.

Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:27 -04:00
Mike Frysinger
a91eb2c56a Blackfin: adi boards: enable CONFIG_MONITOR_IS_IN_RAM
Our monitor is always in RAM, so enable this define for the CFI layer.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:27 -04:00
Sonic Zhang
21a50374d5 Blackfin: bfin_sdh: add support for multiblock operations
Don't forget to count full data size for the multiblock operation request.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:27 -04:00
Cliff Cai
1fd2d792a2 Blackfin: bfin_sdh: set all timer bits before transfer
The timer register is 32bits, not 16bit, so 0xFFFF won't fill it.
Write out -1 to make sure to fill the whole thing.

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:27 -04:00
Mike Frysinger
d633b2dbe4 Blackfin: adi boards: enable ldrinfo
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:27 -04:00
Mike Frysinger
1ba7fd2567 Blackfin: ldrinfo: new command
Simple command to decode/check an LDR image before we try to boot it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:27 -04:00
Mike Frysinger
31488a6f6e Blackfin: bootldr: use common defines
Now that the common bootrom.h sets up defines for us, switch to them
rather than our own local set.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:27 -04:00
Mike Frysinger
e8065f8889 Blackfin: bootrom.h: sync with toolchain
We need the updated LDR bit defines for our LDR utils.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:27 -04:00
Mike Frysinger
dba8cf1b2e Blackfin: adi boards: drop old ELF define
This define isn't used anywhere anymore, so punt it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:27 -04:00
Mike Frysinger
7577aab8a6 Blackfin: bf506f-ezkit: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:26 -04:00
Mike Frysinger
105be9078c Blackfin: default to L1 bank A when L1 bank B does not exist
Some parts lack Bank B in L1 data, so have the linker script fall back to
Bank A when that happens.  This way we can still leverage L1 data.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:26 -04:00
Mike Frysinger
c745a84648 Blackfin: turn off caches when self initializing
When bootstrapping ourselves on the fly at runtime (via "go"), we need to
turn off the caches to avoid taking software exceptions.  Since caches
need CPLBs and CPLBs need exception handlers, but we're about to rewrite
the code in memory where those exception handlers live, we need to turn
off caches first.

This new code also encourages a slight code optimization by storing the
MMR bases in dedicated registers so we don't have to fully load up the
pointer regs multiple times.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:26 -04:00