Commit Graph

28554 Commits

Author SHA1 Message Date
Otavio Salvador
4579dc37c3 warp: Add initial WaRP Board support
The WaRP Board is a Wearable Reference Plaform. The board features:

 - Freescale i.MX6 SoloLite processor with 512MB of RAM
 - Freescale FXOS8700CQ 6-axis Xtrinsic sensor
 - Freescale Kinetis KL16 MCU
 - Freescale Xtrinsic MMA955xL intelligent motion sensing platform

The board implements a hybrid architecture to address the evolving
needs of the wearables market. The platform consists of a main board
and an example daughtercard with the ability to add additional
daughtercards for different usage models.

For more information about the project, visit:

 http://www.warpboard.org/

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
2015-02-23 09:11:44 +01:00
Otavio Salvador
8359318b5e imx: mx6sl: Extend USDHC SD2 pins to support 8-wire use
This adds the DATA[4-7] and RST pin definitions.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-02-23 09:11:43 +01:00
Otavio Salvador
ee0c538951 mmc: fsl_esdhc: Add support to force VSELECT set
Some boards cannot do voltage negotiation but need to set the VSELECT
bit forcely to ensure it to work at 1.8V.

This commit adds CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT flag for this use.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-02-23 09:11:42 +01:00
Otavio Salvador
f022d36e8a mmc: fsl_esdhc: Add CMD11 support to switch to 1.8V
This adds support to switch to 1.8V in case CMD11 succeeds.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-02-23 09:11:42 +01:00
Peng Fan
af38bf6b38 imx:mx6slevk implement power init board
Implement power_init_board and related I2C interface configuration.

After adding this, uboot can successfully detect and configure pmic.

"
U-Boot 2015.01-00281-ge29eddf (Feb 12 2015 - 09:24:01)

CPU:   Freescale i.MX6SL rev1.0 at 396 MHz
Reset cause: POR
Board: MX6SLEVK
I2C:   ready
DRAM:  1 GiB
PMIC:  PFUZE100 ID=0x10
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
"

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-02-23 09:11:41 +01:00
Peng Fan
c82009058b imx:mx6slevk add pmic and i2c configuration
Add pmic and i2c configuration in board header file.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-02-23 09:11:40 +01:00
Peng Fan
9c3de876a1 imx:mx6sl add I2c pad settings
A few pad settings are I2C1

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-02-23 09:11:38 +01:00
Soeren Moch
5df3d19b19 board: tbs2910: Gate clock when switching async clock muxes
According to the i.MX6Q Reference Manual, clocks must be gated when
switching input clocks of async clock muxes. So use clock gates. Avoid
ldb_di0_ipu clock, because there is no clock gate for this signal.

There have never been any complaints about problems with the old code,
but the new approach is in line with the recommendations in the manual.

Signed-off-by: Soeren Moch <smoch@web.de>
2015-02-23 09:11:37 +01:00
Eric Nelson
d9f43c8f5c nitrogen6x: set environment variable reset_cause
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2015-02-17 10:42:54 +01:00
Eric Nelson
11c2e505c4 ARM: i.MX: provide access to reset cause through get_imx_reset_cause()
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2015-02-17 10:42:54 +01:00
Christian Gmeiner
fb2589b330 ot1200: add eeprom command to non-SPL build
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2015-02-17 10:42:54 +01:00
Christian Gmeiner
189d257b7a cmd_eeprom: make it possible to define the used i2c bus
A SoC like the i.MX6 supports more then one i2c bus. In oder to be
able to use the eeprom command add a new define to specify the
i2c bus to use. If CONFIG_SYS_I2C_EEPROM_BUS is not defined there
is no functional change, else a call to i2c_set_bus_num(..) is
done before calling i2c_read(..) and i2c_write(..).

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2015-02-17 10:42:53 +01:00
Peng Fan
83dd1dd91c ARM: imx6 Add WDOG3 for i.MX6SX
There are three wdogs for i.MX 6SoloX. Add wdog3 support
in function imx_set_wdog_powerdown.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-02-17 10:42:53 +01:00
Peng Fan
1f516faa45 ARM: imx6: disable bandgap self-bias after boot
The self-bias circuit is used by the bandgap during startup.
Once the bandgap has stabilized, the self-bias circuit should
be disabled for best noise performance of analog blocks.
Also this bit should be disabled before the chip enters STOP mode or
when ever the regular bandgap is disabled.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Ranjani Vaidyanathan <Ranjani.Vaidyanathan@freescale.com>
2015-02-17 10:42:53 +01:00
Stefano Babic
e72d344386 Merge branch 'master' of git://git.denx.de/u-boot 2015-02-13 11:17:01 +01:00
Hans de Goede
bd2a4888b1 sunxi: configs/sunxi-common.h: Enable CONFIG_CMD_PART
The recent changes to config_distro_bootcmd.h require CONFIG_CMD_PART to be
defined, as the default bootcmd not uses the "part" command.

This fixes sunxi boards not booting with v2015.04-rc1.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-02-11 19:43:45 -05:00
Hans de Goede
478b02f1a7 Add linux/compiler-gcc5.h to fix builds with gcc5
Add linux/compiler-gcc5/h from the kernel sources at:

commit 5631b8fba640a4ab2f8a954f63a603fa34eda96b
Author: Steven Noonan <steven@uplinklabs.net>
Date:   Sat Oct 25 15:09:42 2014 -0700

    compiler/gcc4+: Remove inaccurate comment about 'asm goto' miscompiles

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-02-11 19:43:45 -05:00
Peng Fan
258c98f8d3 imx:mx6 set normal APS and standby PFM mode
To normal mode, use APS switching mode.
To standy mode, use PFM switching mode.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-02-11 12:38:48 +01:00
Stefano Babic
a4f7d09831 pmic: fix missing SWITCH_SIZE
Applying ccbb18713b,
the define disappeared. Fix it.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2015-02-11 12:35:46 +01:00
Peng Fan
7428f55c94 pmic:pfuze implement pmic_mode_init
This patch is to implement pmic_mode_init function, and add prototype
in header file.

This function is to set switching mode for pmic buck regulators to
improve system efficiency.

Mode:
OFF: The regulator is switched off and the output voltage is discharged.
PFM: In this mode, the regulator is always in PFM mode, which
     is useful at light loads for optimized efficiency.
PWM: In this mode, the regulator is always in PWM mode operation
     regardless of load conditions.
APS: In this mode, the regulator moves automatically between
     pulse skipping mode and PWM mode depending on load conditions.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-02-11 12:27:46 +01:00
Tom Rini
db7a7dee68 Merge branch 'master' of git://git.denx.de/u-boot-x86 2015-02-10 10:42:56 -05:00
Tom Rini
c956662cc3 Merge branch 'master' of git://git.denx.de/u-boot-atmel 2015-02-10 10:42:22 -05:00
Tom Rini
0dac731d19 Merge branch 'master' of git://git.denx.de/u-boot-video
Conflicts:
	include/splash.h

Signed-off-by: Tom Rini <trini@ti.com>
2015-02-10 10:41:54 -05:00
Tom Rini
307367eaff Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2015-02-10 10:40:43 -05:00
Nikita Kiryanov
7bf71d1f55 lcd: split splash code into its own function
lcd_logo() currently performs tasks well beyond just displaying the logo.
It has code which displays splash image, it has logic which determines
when the different display features are displayed, and it is coupled with
the lcd console because it holds the responsibility of returning the
lcd console base address.

Make lcd_logo() just about the logo by:
* Moving splash image display code into a dedicated function
* Moving the logic regarding when various features are displayed to
  lcd_clear() (which is arguably not the correct name for housing such
  code either, but it is currently the most fitting location code wise)
* Move the responsibility of setting the console base address to
  lcd_clear() too.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:31:58 +01:00
Nikita Kiryanov
033167c4c5 lcd: dt: extract simplefb support
We now have api functions that can support compiling simplefb code as its own
module. Since this code is not part of the display functionality, extract it
to its own file.

Raspberry Pi is updated to accommodate the changes.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stephen Warren <swarren@wwwdotorg.org>
2015-02-10 13:31:26 +01:00
Nikita Kiryanov
bf21a5deb9 lcd: rename bitmap_plot to better represent its functionality
The name "bitmap_plot" is misleading because it implies that this is a generic
function capable of dealing with any bitmap, but its implementation only works
with the logo data.

Rename the function to better reflect this.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:30:49 +01:00
Nikita Kiryanov
c8d2febcc7 lcd: various cleanups
This cleanup mostly focuses on removing unnecessary whitespace and comments
which are superfluous and/or do not conform to the coding style.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:30:20 +01:00
Nikita Kiryanov
8ddfe2fad8 lcd: remove unused includes
Remove unused includes.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:29:44 +01:00
Nikita Kiryanov
0b29a8969e lcd: introduce lcd_set_cmap
Reduce the lcd_display_bitmap #ifdef complexity by extracting Atmel-specific
code for setting cmap for bitmap images into a new function lcd_set_cmap().
A default version is implemented with the remainder of the code.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:29:02 +01:00
Nikita Kiryanov
2306457c45 lcd: logo: move generic cmap setting to lcd_logo_set_cmap()
Get rid of platform-specific #ifdefs in bitmap_plot() by moving the generic
case of setting cmap into the weak lcd_logo_set_cmap().

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:28:30 +01:00
Nikita Kiryanov
0ee261f6d3 lcd: mpc823: move mpc823-specific lcd_logo_set_cmap code to mpc8xx_lcd.c
Reduce the bitmap_plot #ifdef complexity by extracting MPC823-specific code for
setting cmap into its own implementation of lcd_logo_set_cmap(), implemented in
mpc8xx_lcd.c. In the MPC823 implementation, ARRAY_SIZE(bmp_logo_palette) is
switched for BMP_LOGO_COLORS to avoid having to include bmp_logo_data.h, which
would cause a compilation error because the logo data and palette arrays would
be defined twice.

This is a step towards cleaning bitmap_plot() of platform-specific code.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:27:58 +01:00
Nikita Kiryanov
a02e948139 lcd: atmel: introduce lcd_logo_set_cmap
Reduce the bitmap_plot #ifdef complexity by extracting Atmel-specific code for
setting cmap into a new function lcd_logo_set_cmap(), which is implemented in
atmel_lcdfb driver and defined as part of common/lcd.c api with a weak dummy
version. In the Atmel implementation, ARRAY_SIZE(bmp_logo_palette) is
switched for BMP_LOGO_COLORS to avoid having to include bmp_logo_data.h, which
would cause a compilation error because the logo data and palette arrays would
be defined twice.

This is a step towards cleaning bitmap_plot() of platform-specific code.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:27:28 +01:00
Nikita Kiryanov
27fad01b7f lcd: mpc8xx: move mpc823-specific fb_put_byte to mpc8xx_lcd.c
Reduce the amount of platform-specific code in common/lcd.c by moving MPC823
implementation of fb_put_byte() to mpc8xx_lcd.c. Since we must also have a
default implementation for everybody else, make the remainder of the code
into a weak function.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:26:53 +01:00
Nikita Kiryanov
b3d12e9bca lcd: atmel: move atmel-specific fb_put_word to atmel_lcdfb
Reduce the amount of platform-specific code in common/lcd.c by moving Atmel
implementation of fb_put_word() to atmel_lcdfb.c. Since we must also have a
default implementation for everybody else, make the remainder of the code
into a weak function.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:25:56 +01:00
Nikita Kiryanov
38b550877f lcd: split configuration_get_cmap
configuration_get_cmap() is multiple platform-specific functions stuffed into
one function. Split it into multiple versions, and move each version to the
appropriate driver to reduce the #ifdef complexity.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:25:08 +01:00
Nikita Kiryanov
baaa7dd706 lcd: move platform-specific structs to their own headers
common/lcd code is full of platform-specific code and definitions, which
ideally should reside with the respective driver code. Take a step towards that
goal by moving platform-specific structs from lcd.h to their own header files.

The structs for the generic case (the #else for all the platform-specific
cases) is retained in lcd.h as the default case.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
2015-02-10 13:24:10 +01:00
Fabio Estevam
aee0013e53 mx53loco: Fix boot hang during reboot stress test
Currently by running the following test:

=> setenv bootcmd reset
=> save
=> reset

, we observe a hang after approximately 20-30 minutes of stress reboot test.

Investigation of this issue revealed that when a single DDR chip select is used,
the hang does not happen. It only happens when the two chip selects are active.

MX53 reference manual states at "28.6.2 Memory ZQ calibration sequence":

"The controller must keep the memory lines quiet (except for CK) for the ZQ
calibration time as defined in the Jedec (512 cycles for ZQCL after reset, 256
for other ZQCL and 64 for ZQCS)."

According to the SDE_0 and SDE_1 bit descriptions from register ESDCTL_ESDCTL:

"Writing 1 to SDE0 or SDE1 will initiate power up delays as JEDEC defines.
Power up delays are a function of the configured memory type (DDR2/DDR3/LPDDR2)"

So make sure to activate one chip select at time (CS0 first and then CS1 later),
so that the required JEDEC delay is respected for each chip select.

With this change applied the board has gone through three days of reboot stress
test without any hang.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2015-02-10 12:48:50 +01:00
Graeme Russ
2d6286ab79 arm: mxs: Add 'Wait for JTAG user' if booted in JTAG mode
When booting in JTAG mode, there is no way to use soft break-points, and
no way of knowing when SPL has finished executing (so the user can issue
a 'halt' command to load u-boot.bin for example)

Add a debug output and simple loop to stop execution at the completion of
the SPL initialisation as a pseudo break-point when booting in JTAG mode

Signed-off-by: Graeme Russ <gruss@tss-engineering.com>
2015-02-10 12:48:50 +01:00
Graeme Russ
7a08603707 arm: mxs: Enable booting of mx28 without battery
Section 4.1.2 of Freescale Application Note AN4199 describes the
configuration required to operate the mx28 from a 5V source without a
battery.

This patch changes the behaviour of the dropout control of the DC-DC
converter (refer to section 11.12.9 of the mx28 Application Processor
Reference Manual - Document Number: MCIMX28RM, Rev 2, 08/2013) to the
following:
 - Always use 4P2 Linear Regulator if CONFIG_SYS_MXS_VDD5V_ONLY is defined
 - Switch between 4P2 Linear Regulator and Battery, using whichever has
   the highest voltage if CONFIG_SYS_MXS_VDD5V_ONLY isnot set (this is
   the same as the pre-patch behaviour)

Signed-off-by: Graeme Russ <gruss@tss-engineering.com>
Signed-off-by: Damien Gotfroi <dgotfroi@greenwatch.be>
2015-02-10 12:48:50 +01:00
Graeme Russ
950eaf6230 arm: mxs: Add debug outputs and comments to mxs SPL source files
It is difficult to track down fail to boot issues in the mxs SPL.
Implement the following to make it easier:
 - Add debug outputs to allow tracing of SPL progress in order to track
where failure to boot occurs. DEUBUG and CONFIG_SPL_SERIAL_SUPPORT must
be defined to enable debug output in SPL
 - Add TODO comments where it is not clear if the code is doing what it
is meant to be doing, even tough the board boots properly (these comments
refer to existing code, not to any code added by this patch)

Signed-off-by: Graeme Russ <gruss@tss-engineering.com>
2015-02-10 12:48:49 +01:00
Ye.Li
e8cdeefc22 imx: mx6: Fixed AIPS3 base address issue
Should use AIPS3 configuration address 0x0227C000 to set AIPS3,
not the AIPS3 base address.
Additional, replace AIPS1_BASE_ADDR to AIPS3_ARB_BASE_ADDR to align with
AIPS1 and AIPS2, and resolve the AIPS3_ARB_BASE_ADDR undefine problem.

Signed-off-by: Ye.Li <B37916@freescale.com>
2015-02-10 12:48:49 +01:00
Ye.Li
9598f8c30c imx: imximage: Add QuadSPI boot support
Add QuadSPI boot support to imximage tool.

Note: The QuadSPI configuration parameters at offset 0x400 are not
included in this patch. Need other tools to generate the parameters
part.

Signed-off-by: Ye.Li <B37916@freescale.com>
2015-02-10 12:48:49 +01:00
Ye.Li
5f22d88f82 imx: mx6qsabreauto: Change to use common GPMI IO clock function
Since a clock function setup_gpmi_io_clk is implemented for GPMI
IO clock settings, change to use this common function in GPMI setup.

Signed-off-by: Ye.Li <B37916@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2015-02-10 12:48:49 +01:00
Peng Fan
ccbb18713b pmic:pfuz100 add switch mode and more registers
Add more pfuze register offset.
And switch mode definition.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-02-10 12:48:49 +01:00
Peng Fan
ee52f1a5fe pmic:pfuze add macro for setting voltage
"#define PFUZE100_SW1ABC_SETP(x) ((x - 3000) / 250)"
This macro is for configuring SW1A/B/C Output Voltage easily.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-02-10 12:48:48 +01:00
Peng Fan
1730af1bbd imx:mx6 update fuse_bank0_regs
Update fuse_bank0_regs structure according reference mannual.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-02-10 12:48:48 +01:00
Tom Rini
a4fb5df214 Merge branch 'microblaze' of git://git.denx.de/u-boot-microblaze 2015-02-09 11:44:46 -05:00
Tom Rini
10918c03a9 Merge git://git.denx.de/u-boot-arc 2015-02-09 10:25:20 -05:00
Michal Simek
7f33899221 microblaze: spl: Add LISTS to linker script
This is required for driver model.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09 15:13:12 +01:00