Commit Graph

431 Commits

Author SHA1 Message Date
Simon Glass
53378dac8d dm: led: Add support for blinking LEDs
Allow LEDs to be blinked if the driver supports it. Enable this for
sandbox so that the tests run.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ziping Chen <techping.chan@gmail.com>
2017-04-14 19:38:57 -06:00
Simon Glass
9413ad4f0d dm: led: Support toggling LEDs
Add support for toggling an LED into the uclass interface. This can be
efficiently implemented by the driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ziping Chen <techping.chan@gmail.com>
2017-04-14 19:38:57 -06:00
Simon Glass
8f4b612333 dm: led: Add support for getting the state of an LED
It is useful to be able to read the LED as well as write it. Add this to
the uclass and update the GPIO driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ziping Chen <techping.chan@gmail.com>
2017-04-14 19:38:57 -06:00
Simon Glass
ddae9fcddc dm: led: Adjust the LED uclass
At present this is very simple, supporting only on and off. We want to
also support toggling and blinking. As a first step, change the name of
the main method and use an enum to indicate the state.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ziping Chen <techping.chan@gmail.com>
2017-04-14 19:38:57 -06:00
Stefan Roese
24f927c527 dm: test: Add test for device removal
Add a test for the correct device removal. Currently two different ways
for device removal are supported:

- Normal device removal via the device_remove() API
- Removal via selective device driver flags (DM_FLAG_ACTIVE_DMA)

This new test "remove_active_dma" adds tests cases for those both ways
of removal. This is done by adding a new test driver, which has this
flag set.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
2017-04-04 20:15:10 -06:00
Stefan Roese
706865afe5 dm: core: Add flags parameter to device_remove()
This patch adds the flags parameter to device_remove() and changes all
calls to this function to provide the default value of DM_REMOVE_NORMAL
for "normal" device removal.

This is in preparation for the driver specific pre-OS (e.g. DMA
cancelling) remove support.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2017-04-04 20:15:10 -06:00
Robert P. J. Day
b28c5fcc1c test-fit.py: Minor grammar/spelling/clarification tweaks
* Add note that execution needs Python development package installed
* Standardize on upper case "FIT", "FDT" as necessary for clarity
* Fix "tempoerary", "linex" typos

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2017-03-20 18:04:41 -04:00
Simon Glass
e160f7d430 dm: core: Replace of_offset with accessor
At present devices use a simple integer offset to record the device tree
node associated with the device. In preparation for supporting a live
device tree, which uses a node pointer instead, refactor existing code to
access this field through an inline function.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-02-08 06:12:14 -07:00
Alexander Graf
0e4e38ae38 travis: Add efi_loader grub2 test
We have all the building blocks now to run arbitrary efi applications
in travis. The most important one out there is grub2, so let's add
a simple test to verify that grub2 still comes up.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-27 09:53:40 -05:00
Alexander Graf
95b62b2e28 efi_loader: Allow to compile helloworld.efi w/o bundling it
Today we can compile a self-contained hello world efi test binary that
allows us to quickly verify whether the EFI loader framwork works.

We can use that binary outside of the self-contained test case though,
by providing it to a to-be-tested system via tftp.

This patch separates compilation of the helloworld.efi file from
including it in the u-boot binary for "bootefi hello". It also modifies
the efi_loader test case to enable travis to pick up the compiled file.
Because we're now no longer bloating the resulting u-boot binary, we
can enable compilation always, giving us good travis test coverage.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-27 09:53:39 -05:00
Alexander Graf
4ca4b265ad tests: Add efi_loader hello world test
Now that we have working network tests and a hello world efi application
built inside our tree, we can automatically test that efi binary running
inside of U-Boot.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-26 15:50:53 -05:00
Alexander Graf
1bce3ad5f3 tests: net: Offset downloads to 4MB
The network test currently downloads files at 0MB offset of RAM start.
This works for most ARM systems, but x86 has weird memory layout constraints
on the first MB of RAM.

To not get caught into any of these, let's add a 4MB pad from start
of RAM to the default memory offset.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-26 15:50:52 -05:00
Stefan Brüns
b18491520f fs-test.sh: Update expected results
After the latest changes, ext4 no longer has any fails.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2016-11-21 14:07:28 -05:00
Stefan Brüns
d8c1e0331a test/py: expose config and log as session scoped fixture
If a test uses a fixture which is expensive to setup, the fixture can
possibly created with session or module scope. As u_boot_console has
function scope, it can not be used in this case.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2016-11-21 14:07:27 -05:00
Stephen Warren
b0a928a15d test/py: ensure a log section exists for skipped tests
In pytest 3, runtestprotocol() may not call pytest_runtest_setup() if
the test is skipped. That call is required to create a section for the
test in the log file. If this is skipped, the call to log.end_section()
at the tail of pytest_runtest_protocol() will throw an exception. This
patch ensures that a log section always exists, both to avoid the
exception and to ensure that a consistently structured log file is
always created.

Cc: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reported-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Tom Rini <trini@konsulko.com>
2016-10-23 18:33:17 -04:00
Tom Rini
2b2c6e51e7 test/py/tests/test_sleep.py: Add check for CONFIG_CMD_MISC
We can only run this command if the sleep command is enabled and that
depends on CONFIG_CMD_MISC

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-14 19:12:31 -04:00
Tom Rini
4504062b27 Merge git://git.denx.de/u-boot-fdt 2016-10-13 20:03:33 -04:00
Simon Glass
b02e4044ff libfdt: Bring in upstream stringlist functions
These have now landed upstream. The naming is different and in one case the
function signature has changed. Update the code to match.

This applies the following upstream commits by
Thierry Reding <treding@nvidia.com> :

   604e61e fdt: Add functions to retrieve strings
   8702bd1 fdt: Add a function to get the index of a string
   2218387 fdt: Add a function to count strings

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-13 13:54:10 -06:00
Guillaume GARDET
6a2981a713 test: add NFS download test
Add a NFS download test, based on TFTP test.
Tested on i.MX6 SabreLite board.

Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>

Cc: Tom Rini <trini@konsulko.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-10-13 12:25:36 -05:00
Tom Rini
df9e4cdabb fs-test.sh: Update expected results
Thanks to Stefan Brüns we have more tests and a few more passes too,
update the expected output now.

Cc: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-23 09:29:49 -04:00
Stefan Brüns
2365a4b8ea test/fs: Check writes using "." (same dir) relative path
<path>/<fname> and <path>/./<fname> should reference the same file.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-09-23 08:57:44 -04:00
Stefan Brüns
14678b3c62 test/fs: Check ext4 behaviour if dirent is first entry in directory block
This is a regression test for a crash happening if the first dirent
in the block matches. Code tried to access a predecessor entry which
does not exist.
The crash happened for any block, but "." is always the first entry in
the first directory block and thus easy to check for.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-09-23 08:57:44 -04:00
Stefan Brüns
d9554b7f4b test/fs: strip noise from filesystem code prior to checking results
ext4 and fat code emit some diagnostic messages during command execution.
These additional lines force a match window size which strictly is not
necessary.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-09-23 08:57:43 -04:00
Stefan Brüns
06806e38d8 test/fs: remove use of undefined WRITE_FILE variable
The write file is created from $SMALL_FILE by appending ".w" on all
other occurences in the code.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-09-23 08:57:42 -04:00
Stefan Brüns
86853568ae test/fs: Restructure file path specification to allow some flexibility
Instead of providing the full path, specify directory and filename
separately. This allows to specify intermediate directories, required
for some additional tests.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-09-23 08:57:41 -04:00
Tom Rini
de4be9ec17 test/py/tests/test_vboot.py: Add check that we boot the image
Make sure that when we're telling bootm to boot an image, and we expect
the image to boot we get the output from sandbox that we attempted to
run Linux and that U-Boot completed its job.

Cc: Simon Glass <sjg@chromium.org>
Cc: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Stephen Warren <swarren@nvidia.com>
2016-09-22 11:34:58 -04:00
Tom Rini
10ba92f69e fs-test.sh: Correct check_md5() test with newlines
The fs-test.sh script expected there to be a \n\r style newline at the
end of the output. This is no longer the case, so use 'tr' to remove the
\r that we get.

Fixes: (c5917b4b05 "dm: serial-uclass: Move a carriage return before a
        line feed")
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-08-22 19:37:56 -04:00
Stephen Warren
4ba58bdabd test/py: match prompt only at line boundaries
This prevents capture of command output from terminating early on boards
that use a simple prompt (e.g. "=> ") that appears in the middle of
command output (e.g. crc32's "... ==> 2fa737e0").

Reported-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Tested-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2016-08-20 14:03:24 -04:00
Maxime Ripard
f2a9942fbc tests: Introduce DT overlay tests
This adds a bunch of unit tests for the "fdt apply" command.

They've all been run successfully in the sandbox. However, as you still
require an out-of-tree dtc with overlay support, this is disabled by
default.

Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-08-20 11:35:07 -04:00
Simon Glass
f6d34651d8 test: Adjust run_command_list() to return a list of strings
Return one string for each command that was executed. This seems cleaner.

Suggested-by: Teddy Reed <teddy.reed@gmail.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
2016-08-05 20:55:23 -04:00
Simon Glass
27c087d58a test: Add a function to restart U-Boot
Add a proper function for this rather than using internal functions. Use it
in the single call site.

Also, do a restart at the end of the vboot test to reset to the normal
device tree.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Stephen Warren <swarren@nvidia.com>
2016-08-05 20:55:22 -04:00
Simon Glass
851271a71a test: vboot: Put each test variant in its own section
Use 'cons.log.section' feature to split up the test output. This makes it
easier to read.

Suggested-by: Stephen Warren <swarren@nvidia.com>

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-08-05 20:55:22 -04:00
Simon Glass
ac9a23cffc test: Rename sha to sha_algo and pass it around
Rename this argument and pass it to each function that needs it, instead of
making it global.

Suggested-by: Stephen Warren <swarren@nvidia.com>
Suggested-by: Teddy Reed <teddy.reed@gmail.com>

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-08-05 20:55:21 -04:00
Simon Glass
ec70f8a911 test: Drop the cmd() function
Instead of this, use the existing run_and_log() function, enhanced to
support a command string as well as a list of arguments.

Suggested-by: Stephen Warren <swarren@nvidia.com>

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-08-05 20:55:20 -04:00
Simon Glass
72f5226894 test: Fix typos in comments
Fix some typos in various files introduced with the vboot test conversion.

Reported-by: Teddy Reed <teddy.reed@gmail.com>

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-08-05 20:55:20 -04:00
Simon Glass
7f64b1874c test: Check exit status in run_and_log_expect_exception()
This check was missed. Add it and make the message more verbose.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Tom Rini <trini@konsulko.com>
Fixes: 9e17b034 (test/py: Provide a way to check that a command fails)
2016-08-05 20:55:19 -04:00
Simon Glass
bcbd0c8fe1 test: Fix typos and tidy up
Fix review comments that were missed at the time. Also explain why we need
to regenerate the device tree for each test.

Reported-by: Teddy Reed <teddy.reed@gmail.com>
Suggested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: f6349c3c (test: Add a README)
2016-08-05 20:55:19 -04:00
Stephen Warren
61f5ddcb7a Add a power domain framework/uclass
Many SoCs allow power to be applied to or removed from portions of the SoC
(power domains). This may be used to save power. This API provides the
means to control such power management hardware.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-07-27 16:29:56 -06:00
Simon Glass
911954859d dm: Use dm_scan_fdt_dev() directly where possible
Quite a few places have a bind() method which just calls dm_scan_fdt_dev().
We may as well call dm_scan_fdt_dev() directly. Update the code to do this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-27 14:15:54 -06:00
Simon Glass
2e3f1ff63f dm: Convert users from dm_scan_fdt_node() to dm_scan_fdt_dev()
This new function is more convenient for callers, and handles pre-relocation
situations automatically.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-27 14:15:07 -06:00
Michal Simek
04a4786c7c test/py: vboot can be run only at Sandbox
Getting this error:
Zynq> sb load hostfs - 100
/home/monstr/data/disk/u-boot/build-zynq_zc706/test.fit
Unknown command 'sb' - try 'help'

because sb command is present only for Sandbox
obj-$(CONFIG_SANDBOX) += host.o

that's why mark this test to be run only at Sandbox

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-07-22 14:52:04 -04:00
Stephen Warren
c9ba60c438 test/py: use absolute dts path in vboot test
Without this, the test fails if the test is run with a cwd other than the
root of the U-Boot source tree.

Fixes: 8729d58259 ("test: Convert the vboot test to test/py")
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-22 14:46:24 -04:00
Simon Glass
f60d0603ed test: Adjust the of-platdata test run condition
This should be spl_of_platdata, since otherwise it will try to run on boards
that don't support of-platdata.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-16 21:01:44 -04:00
Tom Rini
ebe621d5fb Merge git://git.denx.de/u-boot-dm 2016-07-15 08:06:22 -04:00
Simon Glass
b979d3d4c5 dm: Add a test for of-platdata
Add a simple test which checks that the of-platdata system is working
correctly. The sequence is as follows:

- SPL starts up and probes all the UCLASS_MISC drivers
- There are 3 of these in sandbox.dts
- Therefore there should be 3 U_BOOT_DEVICE() declarations in dt-platdata.c
- These should produce 3 sandbox_spl_test devices
- Each device prints out its platform data when probed
- This test checks for this output and compares it against expectations

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14 20:40:24 -06:00
Simon Glass
a811779b17 test/py: Start sandbox SPL when enabled
When sandbox SPL is enabled we want to start that rather than U-Boot proper,
since some tests may rely on running it first.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14 20:40:24 -06:00
Simon Glass
ebec58fbcb test/py: Provide a way to get early console output
Some tests want to check the console output from SPL or U-Boot proper.
Provide a means to do this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14 20:40:24 -06:00
Simon Glass
c7f636f59d test/py: Note which console produced unexpected output
At present the SPL and U-Boot consoles both present the same error message
when the expected console output does not appear. Add "SPL" to the SPL error
message to resolve this ambiguity.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14 20:40:24 -06:00
Simon Glass
2fedbaa4ae test/py: Handle testing with the sandbox_spl board
This board can sometimes be used for tests. Handle it the same way as
sandbox.

Note: I plan to drop the sandbox_spl board at some point and merge its
features into sandbox. So this commit may not be necessary.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14 20:40:24 -06:00
Simon Glass
8729d58259 test: Convert the vboot test to test/py
Now that we have a suitable test framework we should move all tests into it.
The vboot test is a suitable candidate. Rewrite it in Python and move the
data files into an appropriate directory.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14 18:22:40 -04:00
Simon Glass
73a9054d0f test/py: Add a helper to run a list of U-Boot commands
Some tests want to execute a sequence of commands. Add a helper for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
2016-07-14 18:22:36 -04:00
Simon Glass
9e17b0345a test/py: Provide a way to check that a command fails
Sometimes we want to run a command and check that it fails. Add a function
to handle this. It can check the return code and also make sure that the
output contains a given error message.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14 18:22:35 -04:00
Simon Glass
8b304a37df test/py: Add an option to execute a string containing a command
It is sometimes inconvenient to convert a string into a list for execution
with run_and_log(). Provide a helper function to do this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
2016-07-14 18:22:35 -04:00
Simon Glass
f3d3e95ce5 test/py: Return output from run_and_log()
It is useful to be able to obtain the output from a command. Return it from
this function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
2016-07-14 18:22:34 -04:00
Simon Glass
86845bf38d test/py: Provide output from exceptions with RunAndLog()
Tests may want to look at the output from running a command, even if it
fails (e.g. with a non-zero return code). Provide a means to obtain this.

Another approach would be to return a class object containing both the
output and the exception, but I'm not sure if that would result in a lot
of refactoring.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
2016-07-14 18:22:34 -04:00
Simon Glass
3b8d9d977b test/py: Allow RunAndLog() to return the output
Tests may want to look at the output from running a command. Return it so
that this is possible.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
2016-07-14 18:22:34 -04:00
Simon Glass
0671960bee test/py: Allow tests to control the sandbox device-tree file
Normally tests will run with the test.dtb file designed for this purpose.
However, the verified boot tests need to run with their own device-tree
file, containing a public key.

Make the device-tree file a config option so that it can be adjusted by
tests. The default is to keep the current behaviour.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
2016-07-14 18:22:33 -04:00
Simon Glass
07f4eadc99 test: Add a simple script to run tests on sandbox
A common check before sending patches is to run all available tests on
sandbox. But everytime I do this I have to look up the README. This presents
quite a barrier to actually doing this.

Add a shell script to help. To run the tests, type:

   test/run

in the U-Boot directory, which should be easy to remember.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
2016-07-14 18:22:32 -04:00
Simon Glass
f6349c3c4c test: Add a README
Add a few notes about how testing works in U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Teddy Reed <teddy.reed@gmail.com>
2016-07-14 18:22:31 -04:00
Daniel Schwierzeck
d56dd0b1f8 test/py: support 'memstart =' in u_boot_utils.find_ram_base()
Some archs like MIPS or PPC have a different 'bdinfo' output
than ARM regarding the memory configuration. Also support
'memstart = 0x*' in u_boot_utils.find_ram_base() to make
all tests requiring the RAM base working on those archs.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2016-07-08 17:16:45 -04:00
Stephen Warren
085e64dd42 test/py: strip VT100 codes from match buffer
Prior to this patch, any VT100 codes emitted by U-Boot are considered part
of a command's output, which often causes tests to fail. For example,
test_env_echo_exists executes printenv, and then considers any text on a
line before an = sign as a valid U-Boot environment variable name. This
includes any VT100 codes emitted. When the test later attempts to use that
variable, the name would be invalid since it includes the VT100 codes.
Solve this by stripping VT100 codes from the match buffer, so they are
never seen by higher level test code.

The codes are still logged unmodified, so that users can expect U-Boot's
exact output without interference. This does clutter the log file a bit.
However, it allows users to see exactly what U-Boot emitted rather than a
modified version, which hopefully is better for debugging. It's also much
simpler to implement, since logging happens as soon as text is received,
and so stripping the VT100 codes from the log would require handling
reception and stripping of partial VT100 codes.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2016-07-08 17:16:42 -04:00
Stephen Warren
a82642f398 test/py: fix CONFIG_ tests
Some CONFIG_ variables were recently renamed, but test/py wasn't updated
to match. This causes some tests to be skipped. Fix test/py so the tests
are run.

Fixes: 1163625898 ("Rename reset to sysreset")
Fixes: f1f9d4fac5 ("hush: complete renaming CONFIG_SYS_HUSH_PARSER to CONFIG_HUSH_PARSER")
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2016-07-08 12:47:58 -04:00
Masahiro Yamada
f1f9d4fac5 hush: complete renaming CONFIG_SYS_HUSH_PARSER to CONFIG_HUSH_PARSER
There is no more define of CONFIG_SYS_HUSH_PARSER.  Rename some
remaining references and drop the backward compatible Kconfig entry.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-24 17:24:34 -04:00
Stephen Warren
135aa95002 clk: convert API to match reset/mailbox style
The following changes are made to the clock API:
* The concept of "clocks" and "peripheral clocks" are unified; each clock
  provider now implements a single set of clocks. This provides a simpler
  conceptual interface to clients, and better aligns with device tree
  clock bindings.
* Clocks are now identified with a single "struct clk", rather than
  requiring clients to store the clock provider device and clock identity
  values separately. For simple clock consumers, this isolates clients
  from internal details of the clock API.
* clk.h is split so it only contains the client/consumer API, whereas
  clk-uclass.h contains the provider API. This aligns with the recently
  added reset and mailbox APIs.
* clk_ops .of_xlate(), .request(), and .free() are added so providers
  can customize these operations if needed. This also aligns with the
  recently added reset and mailbox APIs.
* clk_disable() is added.
* All users of the current clock APIs are updated.
* Sandbox clock tests are updated to exercise clock lookup via DT, and
  clock enable/disable.
* rkclk_get_clk() is removed and replaced with standard APIs.

Buildman shows no clock-related errors for any board for which buildman
can download a toolchain.

test/py passes for sandbox (which invokes the dm clk test amongst
others).

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-06-19 17:05:55 -06:00
Stephen Warren
4581b717b1 reset: implement a reset test
This adds a sandbox reset implementation (provider), a test client
device, instantiates them both from Sandbox's DT, and adds a DM test
that excercises everything.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-06-19 17:05:55 -06:00
Stephen Warren
7a8f886558 test/py: fix printenv signon message disable code
CONFIG_VERSION_VARIABLE isn't always defined, so we can't simply look up
its value directly, or an exception will occur if it isn't defined.
Instead, we must use .get() to supply a default value if the variable
isn't defined.

Fixes: da37f006e7 ("tests: py: disable main_signon check for printenv cmd")
Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2016-06-19 09:50:56 -04:00
Heiko Schocher
da37f006e7 tests: py: disable main_signon check for printenv cmd
if CONFIG_VERSION_VARIABLE is set, the U-Boot environment
contains a "vers" variable with the current U-Boot version
string. If now "printenv" is called, test/py fails as it
detects the main_sign string, which is in this case correct.

So check only the main_sign as an error, if CONFIG_VERSION_VARIABLE
is not set.

Signed-off-by: Heiko Schocher <hs@denx.de>
2016-06-09 13:53:05 -04:00
mario.six@gdsys.cc
743268f514 dm: test: Add GPIO open drain tests
Add some tests for the new open drain setting feature of the GPIO
uclass, and extend the capabilities of the sandbox GPIO driver
accordingly.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 22:14:20 -07:00
Tom Rini
e4a94ce4ac Merge git://git.denx.de/u-boot-dm
For odroid-c2 (arch-meson) for now disable designware eth as meson
now needs to do some harder GPIO work.

Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
	lib/efi_loader/efi_disk.c

Modified:
	configs/odroid-c2_defconfig
2016-05-27 20:34:12 -04:00
Michal Simek
87861c1970 test/py: Support setting up specific timeout
Large file transfers, flash erasing and more complicated tests
requires more time to finish. Provide a way to setup specific
timeout directly in test.

For example description for 50s test:
timeout = 50000
with u_boot_console.temporary_timeout(timeout):
  u_boot_console.run_command(...)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
2016-05-27 15:39:57 -04:00
Heiko Schocher
7e6621a1ca test/py: fix NameError exception if bdi cmd is not supported
test/py raises an error, if a board has not enabled bdi command

>           pytest.skip('bdinfo command not supported')
E           NameError: global name 'pytest' is not defined

import pytest in test/py/u_boot_utils.py fixes this.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
2016-05-27 10:01:09 -04:00
Stephen Warren
8961b52424 mailbox: implement a sandbox test
This adds a sandbox mailbox implementation (provider), a test client
device, instantiates them both from Sandbox's DT, and adds a DM test
that excercises everything.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org> # v1
2016-05-26 20:48:31 -06:00
Stephen Warren
1163625898 Rename reset to sysreset
The current reset API implements a method to reset the entire system.
In the near future, I'd like to introduce code that implements the device
tree reset bindings; i.e. the equivalent of the Linux kernel's reset API.
This controls resets to individual HW blocks or external chips with reset
signals. It doesn't make sense to merge the two APIs into one since they
have different semantic purposes. Resolve the naming conflict by renaming
the existing reset API to sysreset instead, so the new reset API can be
called just reset.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-05-26 20:48:31 -06:00
Simon Glass
341392dd11 dm: mmc: test: Add tests for MMC
Add a simple test which checks that a sandbox-emulated SD card can be used
correctly. This tests plumbing through the MMC stack's block-device
implementaion.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
afa2c3122d dm: sandbox: mmc: Enable building MMC code for sandbox
Enable building the MMC code for sandbox. This increases build
coverage for sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
f8b7752e8f dm: sandbox: Only enable the sandbox MMC driver when valid
This driver will require generic MMC and block-device support in a future
commit. To avoid test errors, make this change now.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Heiko Schocher
b8218a9146 tests: py: fix NameError exception if bdi cmd is not supported
test/py raises an error, if a board has not enabled bdi command

>           pytest.skip('bdinfo command not supported')
E           NameError: global name 'pytest' is not defined

import pytest in test/py/u_boot_utils.py fixes this.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
2016-05-13 09:17:33 -04:00
Stephen Warren
daa69f5f5d test/py: dfu: wait for USB device to go away at boot
It can take a while for a host machine to notice that a USB device has
disconnected, and process the change. At the end of the DFU test, we wait
up to 10 seconds for this to happen. This change makes the test wait the
same (up to) 10 seconds at the start of the test for any previously active
USB device-mode session to be cleaned up. Such as session might have been
used to download U-Boot into memory for example; this is certainly true
on my Tegra test systems. This changes should solve the DFU test
intermittency issues I've been seeing on some Tegra devices.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2016-05-06 10:10:53 -04:00
Lukasz Majewski
f3a87f5b79 tests: py: dfu: Provide functionality to set test and dummy files alt settings
After concatenation of "dfu_alt_info" variable from "dfu_alt_boot" and
"dfu_alt_system" it may happen that test and dummy files alt settings
are different than default 0 and 1.

This patch provides the ability to set different values for them.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
---
Changes for v3:
- replace variables declarations with ones read from configuration file
- remove not necessary str() conversion at DFU host command generation

Changes for v2:
- generate "alt_info" automatically
- use file names as alt settings instead of numerical values
- extend in-code documentation
2016-04-25 17:56:30 +02:00
Lukasz Majewski
8eb3752446 tests: py: dfu: Add functionality to set different u-boot's dfu env variable
By default (on almost all systems) the dfu env variable, which defines
available alt settings, is named as "dfu_alt_info".

However on some platforms (i.e. Odroid XU3), the 'dfu_alt_info' is concatenated
from other variables - namely 'dfu_alt_boot' and 'dfu_alt_system' at run time
(when one types 'dfu 0 mmc 0' for first time).

'dfu_alt_boot' describes alt settings which depend on boot medium - for example
boot loader's LBA sectors which are different on eMMC and SD card because of e.g.
MBR/GPT.

'dfu_alt_system' describes board agnostic alt settings - like rootfs, kernel.
On such system we can only append/modify this env variable.

Because of the above, we must have way to modify other than "dfu_ale_info"
variable to perform tests.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
---
Changes for v3:
- None

Changes for v2:
- Rewrite of "alt_info_env_name" variable description
- Use of get() method on python's dictionary to easily obtain default
  value
2016-04-25 17:56:30 +02:00
Lukasz Majewski
c6eb899c4d tests: py: dfu: Add variables to store dfu alt numbers for test and dummy files
This patch replaces hardcoded (i.e. 0 and 1) values passed to dfu_{read|write}
with variables.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
---
Changes for v3:
- Replace per module global variables with ones defined inside a function
Changes for v2:
- None
2016-04-25 17:56:29 +02:00
Tom Rini
f09144a220 test/dm/core.c: Make pre-reloc test use pre-reloc struct
LLVM 3.5 noted:
test/dm/core.c:41:35: warning: unused variable 'test_pdata_pre_reloc' [-Wunused-const-variable]
static const struct dm_test_pdata test_pdata_pre_reloc = {

And the correct fix here is that the driver_info_pre_reloc test should
use the test_pdata_pre_reloc not test_pdata_manual variable

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-04-14 11:51:39 -06:00
Stephen Warren
5b2beab5cd test/py: README: link to example hook scripts
When implementing test/py hook scripts, it's helpful to read some working
examples. Provide a link to some. The link was mentioned in the commit
message which first added test/py, but not in any documentation file.

Suggested-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-11 20:48:25 -04:00
Michal Simek
3ba1352b97 test/py: Add support for loading image via tftp to specified location
For example this setting:

env__net_tftp_readable_file = {
    "fn": "ep108/image.ub",
    "addr": 0x10000000,
    "size": 25846296,
    "crc32": "b726f9de",
}

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2016-04-11 20:48:22 -04:00
Stephen Warren
eed095da30 test/py: pass -v option when executing sandbox
This shows more output, such as the internal output generated by the unit
test ("ut") command, which makes it easier to debug issues.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-04-11 20:48:21 -04:00
Mateusz Kulikowski
d33776e43d spmi: Add sandbox test driver
This patch adds emulated spmi bus controller with part of
pm8916 pmic on it to sandbox and tests validating SPMI uclass.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-04-01 17:18:12 -04:00
Simon Glass
e4fb863f6d dm: blk: Add tests for block devices
Add some tests to check that block devices work as expected.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-17 21:27:39 -06:00
Simon Glass
61ccd886e2 dm: usb: Clean up USB after each test
The USB subsystem has a few counters that need to be reset since they are
stored in static variables rather than driver-model data. An example is
usb_max_devs. Ultimately we should move this data into the USB uclass.

For now, make sure that USB is reset after each test, so that the counters
go back to zero.

Note: this is not a perfect solution: It a USB test fails it will exit
immediately and leave USB un-reset. The impact here is that it may cause
subsequence test failures in the same run.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-03-14 15:34:50 -06:00
Simon Glass
2a981dc2c6 dm: block: Adjust device calls to go through helpers function
To ease conversion to driver model, add helper functions which deal with
calling each block device method. With driver model we can reimplement these
functions with the same arguments.

Use inline functions to avoid increasing code size on some boards.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
ebac37cfbf dm: blk: Rename get_device() to blk_get_device_by_str()
The current name is too generic. The function returns a block device based
on a provided string. Rename it to aid searching and make its purpose
clearer. Also add a few comments.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
4101f68792 dm: Drop the block_dev_desc_t typedef
Use 'struct' instead of a typdef. Also since 'struct block_dev_desc' is long
and causes 80-column violations, rename it to struct blk_desc.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
f8025b58f8 spi: Re-enable the SPI flash tests
These are working correctly again, so re-enable them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jteki@openedev.com>
Tested-by: Jagan Teki <jteki@openedev.com>
2016-02-26 08:53:10 -07:00
Simon Glass
f91281b1eb trace: Improve the trace test number recognition
The awk tool can be confused by return character (ASCII 13) in its input
since it thinks there is a separate field. These can appear if the terminal
is in raw mode, perhaps due to a previous U-Boot crash with sandbox. This
is very confusing. Remove these so that the trace test passes.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-26 08:53:10 -07:00
Simon Glass
0edd82e244 image: Fix FIT and vboot tests to exit sandbox correctly
When used with a device tree, sandbox now requires a 'reset' controller. Add
this to the device trees so that reset works and the tests can complete.

Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: 5010d98f (sandbox: Use the reset driver to handle reset)
2016-02-26 08:53:10 -07:00
Stephen Warren
24862c640e test/py: skip tests that require large CONFIG_SYS_MAXARGS
test_hush_if_test.py executes commands that require large values of
CONFIG_SYS_MAXARGS. Detect cases where the configured value is too low
and skip those tests.

Ideally, this would be implemented inside console.run_command(). However,
the command passed to that function is already a completely formed string,
and determining its argument count usage would require splitting commands
at ;, handling quoting to deal with arguments containing spaces, etc. Even
passing the command as a list wouldn't solve all these issues, since we'd
still need to split commands on ; and deal with cases like "if test ..."
which consumes 0 of the argument count.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Simon Glass <sjg@chromium.org>
2016-02-26 08:42:12 -05:00
Stephen Warren
38831ca3be test/py: use space to interrupt autoboot
Sending CTRL-C to QEMU's stdin aborts the process, even if stdin is being
used as a serial port (at least in the raspi2 machine with "qemu -serial
stdin"). Avoid sending CTRL-C to U-Boot to prevent it exiting.

I'd originally used CTRL-C to make sure that if the character used to
abort autoboot ended up being treated as part of a command as well, it'd
abort command entry and return the prompt to a known state. However, this
is not needed, since aborting the autoboot eats the character used to do
that.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Simon Glass <sjg@chromium.org>
2016-02-26 08:42:11 -05:00
Michal Simek
299e5bb7c2 test/py: Add option to skip SPL signature checking
Provide user option to skip SPL signature verification for cases where
u-boot is build with SPL support but full U-Boot is also verified
without SPL.

If you want to support this feature please add env__spl_skipped = True
to your boardenv configuration file.

For example Xilinx Zynq is using this feature where the same U-Boot
binary is checked with SPL and without SPL(with FSBL).

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-02-25 10:21:19 -05:00
Heiko Schocher
b1309a23e0 test/py: only check for SPL signature if SPL uses serial output
check for U-Boot SPL signature only if SPL really has a serial output.
So check if CONFIG_SPL_SERIAL_SUPPORT is active in board config.

Signed-off-by: Heiko Schocher <hs@denx.de>
Tested-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
2016-02-24 18:44:00 -05:00
Stephen Warren
9725543843 test/py: put "Starting U-Boot" into separate log section
The initial boot of U-Boot happens within the context of the first test
that needs to access the U-Boot console when there is no existing
connection. This keeps all activity nestled within test execution, which
fits well into the pytest model. However, this mingles the U-Boot startup
logs with the execution of some test(s), which hides find the boundary
between the two.

To solve this, wrap the "Starting U-Boot" logic into a separate log
section. If the user wishes, they can simply collapse this log section
when viewing the HTML log, to concentrate purely on the test's own
interaction.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-02-15 20:58:29 +00:00
Stephen Warren
93134e18e8 test/py: handle exceptions in console creation
u_boot_console.exec_attach.get_spawn() performs two steps:
1) Spawn a process to communicate with the serial console.
2) Reset the board so that U-Boot starts running from scratch.

Currently, if an exception happens in step (2), no cleanup is performed on
the process created in step (1). That process stays running and may e.g.
hold serial port locks, or simply continue to read data from the serial
port, thus preventing it from reaching any other process that attempts to
read from the same serial port later. While there is error cleanup code in
u_boot_console_base.ensure_spawned(), this is not triggered since the
exception prevents assignment to self.p there, and hence the exception
handler has no object to operate upon in cleanup_spawn().

Solve this by enhancing u_boot_console.exec_attach.get_spawn() to clean
up any objects it has created.

In theory, u_boot_spawn.Spawn's constructor has a similar issue, so fix
this too.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-02-15 20:58:29 +00:00
Stephen Warren
1326022c2e test/py: print summary in test order
Use lists rather than sets to record the status of tests. This causes
the test summary in the HTML file to be generated in the same order as
the tests are (or would have been) run. This makes it easier to locate
the first failed test. The log for this test might have interesting
first clues re: interaction with the environment (e.g. hardware flashing,
serial console, ...) and may help tracking down external issues.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-02-15 20:58:28 +00:00
Stephen Warren
1235c79182 test/py: fix CONFIG_SPL test
The Python ini file parser that's used to parse .config converts all keys
to lower-case. Hence, all queries against the results must use lower-case.
Fix u_boot_console.ensure_spawned() to test CONFIG_SPL correctly, or the
connection will fail for boards that have SPL.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-02-15 20:58:28 +00:00
Stephen Warren
06088b0473 test/py: don't import pexpect
The code replaced pexpect with custom code long ago. Don't import the
unused module so it doesn't need to be installed.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-02-15 20:58:27 +00:00
Stephen Warren
d70facf89c test/py: add docs for gdbserver and pytest options
Add documentation describing the new --gdbserver feature, and some common
pytest options.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-02-15 20:58:27 +00:00
Stephen Warren
1cd85f571d test/py: run all "ut" subtests
Invoke each "ut"-based unit test as a separate pytest.

Now that the DM unit test runs under test/py, remove the manual shell
script that invokes it.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org> # v2, on sandbox
2016-02-15 20:58:26 +00:00
Stephen Warren
c82ce04a3f test/py: capture the entire U-Boot version at boot
The existing regex simply ensures that the captured version string doesn't
go past the end of a line. We really want to grab as much as possible. Do
this by explicitly including a ) character at the end of the regex to
match the last character of the version test.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2016-02-09 15:41:19 -07:00
Stephen Warren
d8926811fd test/py: fix off-by-one error in spawn matching code
A regex match object's .end() value is already the index after the match,
not the index of the last character in the match, so there's no need to
add 1 to point past the match.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2016-02-09 15:41:19 -07:00
Stephen Warren
83357fd5c2 test/py: HTML awesome!
Implement three improvements to the HTML log file:
- Ability to expand/contract sections. All passing sections are contracted
  at file load time so the user can concentrate on issues requiring
  action.
- The overall status report is copied to the top of the log for easy
  access.
- Add links from the status report to the test logs, for easy navigation.

This all relies on Javascript and the jquery library. If the user doesn't
have Javascript enabled, or jquery can't be downloaded, the log should
look and behave identically to how it did before this patch.

A few notes on the diff:

- A few more 'with log.section("xxx")' were added, so that all stream
  blocks are kept within a section block for consistent HTML entity
  nesting structure. This changed indentation in a few places, making
  the diff look slightly larger.
- HTML entity IDs are cleaned up. We assign simple incrementing integer
  IDs now, rather than using mangled test names which were possibly
  invalid.
- Sections and streams now use common CSS class names (in addition to the
  current separate class names) to more easily share the new behaviour.
  This also reduces the CSS file size since rules don't need to be
  duplicated.
- An "OK" status is logged after some external command executions so that
  make and flash steps are auto-contracted at log file load time, assuming
  they passed.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2016-02-09 15:41:19 -07:00
Stephen Warren
ac99831b7d test/py: exit(1) if there are problems running py.test
The test/py/test.py wrapper script catches exceptions thrown when
exec()ing py.test in order to print a helpful error message. However,
the exception handling code squashes the exception and so the script
exits with a non-zero exit code, leading callers to believe that it
passed. Fix this.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2016-02-09 15:41:19 -07:00
Stephen Warren
89ab841088 test/py: support running sandbox under gdbserver
Implement command--line option --gdbserver COMM, which does two things:

a) Run the sandbox process under gdbserver, using COMM as gdbserver's
   communication channel.

b) Disables all timeouts, so that if U-Boot is halted under the debugger,
   tests don't fail. If the user gives up in the middle of a debugging
   session, they can simply CTRL-C the test script to abort it.

This allows easy debugging of test failures without having to manually
re-create the failure conditions. Usage is:

Window 1:
./test/py/test.py --bd sandbox --gdbserver localhost:1234

Window 2:
gdb ./build-sandbox/u-boot -ex 'target remote localhost:1234'

When using this option, it likely makes sense to use pytest's -k option
to limit the set of tests that are executed.

Simply running U-Boot directly under gdb (rather than gdbserver) was
also considered. However, this was rejected because:

a) gdb's output would then be processed by the test script, and likely
   confuse it causing false failures.

b) pytest by default hides stdout from tests, which would prevent the
   user from interacting with gdb.

   While gdb can be told to redirect the debugee's stdio to a separate
   PTY, this would appear to leave gdb's stdio directed at the test
   scripts and the debugee's stdio directed elsewhere, which is the
   opposite of the desired effect. Perhaps some complicated PTY muxing
   and process hierarchy could invert this. However, the current scheme
   is simple to implement and use, so it doesn't seem worth complicating
   matters.

c) Using gdbserver allows arbitrary debuggers to be used, even those with
   a GUI. If the test scripts invoked the debugger themselves, they'd have
   to know how to execute arbitary applications. While the user could hide
   this all in a wrapper script, this feels like extra complication.

An interesting future idea might be a --gdb-screen option, which could
spawn both U-Boot and gdb separately, and spawn the screen into a newly
created window under screen. Similar options could be envisaged for
creating a new xterm/... too.

--gdbserver  currently only supports sandbox, and not real hardware.
That's primarily because the test hooks are responsible for all aspects of
hardware control, so there's nothing for the test scripts themselves can
do to enable gdbserver on real hardware. We might consider introducing a
separate --disable-timeouts option to support use of debuggers on real
hardware, and having --gdbserver imply that option.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2016-02-08 10:22:39 -05:00
Simon Glass
a108082d4d video: test: Adjust order of file closure
Close the file earlier to hopefully fix a Coverity error.

Reported-by: Coverity (CID: 134901)

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-06 13:57:15 +01:00
Simon Glass
5674ead7d2 video: test: Add console tests for truetype
This adds tests for the different character types, line wrap, scrolling and
backspace.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-30 10:58:37 +01:00
Simon Glass
8df8dad528 video: sandbox: Enable truetype fonts for sandbox
Enable this feature so that truetype fonts can be used on the sandbox
console. Update the tests to select the normal/rotated console when needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2016-01-30 10:58:26 +01:00
Simon Glass
5508f10ac9 video: Handle the 'bell' character
This can be sent when to many characters are entered. Make sure it is
ignored and does not cause a character to be displayed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-30 10:55:02 +01:00
Simon Glass
f266178698 video: Use fractional units for X coordinates
With anti-aliased fonts we need a more fine-grained horizontal position
than a single pixel. Characters can be positioned to start part-way through
a pixel, with anti-aliasing (greyscale edges) taking care of the visual
effect.

To cope with this, use fractional units (1/256 pixel) for horizontal
positions in the text console.

Signed-off-by: Simon Glass <sjg@chromium.org>
[agust: rebased]
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2016-01-30 10:53:26 +01:00
Stephen Warren
26db3a617b test/py: dfu: allow boardenv to specify test sizes
Allow the env__dfu_configs boardenv data to specify the set of DFU
transfer sizes to test. Manually specifying test sizes is useful if you
wish to test multiple DFU configurations (e.g. SD card ext4 filesystem, SD
card whole raw partition, RAM, etc.), but don't want to test every
single transfer size on each, to avoid bloating the overall time taken by
testing. If the boardenv doesn't specify a set of sizes, the built-in list
is used as a default, preserving backwards-compatibility.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:24 -07:00
Stephen Warren
db261f0076 test/py: fix a couple typos in comments
s/updata/update/.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:24 -07:00
Stephen Warren
d27f2fc1e1 test/py: run sandbox in source directory
Some unit tests expect the cwd of the sandbox process to be the root
of the source tree. Ensure that requirement is met.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:24 -07:00
Stephen Warren
77bcb22d77 test/py: pass test DTB to sandbox
This is required for at least "ut dm" to operate correctly.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:24 -07:00
Stephen Warren
78b39cc3e1 test/py: correctly log xfail/xpass tests
Tests can complete in passed, skipped, xpass, xfailed, or failed, states.
Currently the U-Boot log generation code doesn't handle the xfailed or
xpass states since they aren't used. Add support for the remaining states.
Without this, tests that xfail end up being reported as skipped.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:24 -07:00
Stephen Warren
9129d9f5fd test/py: detect another "bad pattern" in console output
Many error situations in U-Boot print the message:
    ### ERROR ### Please RESET the board ###

Add this to the list of bad patterns the test system detects. One
practical advantage of this change is to detect the case where sandbox
is told to use a particular DTB file, and the file cannot be opened.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:24 -07:00
Stephen Warren
0c6189b5d6 test/py: check for bad patterns everywhere we wait
Currently, bad patterns are only honored when executing a shell command.
Other cases, such as the initial boot-up of U-Boot or when interacting
with command output rather than gathering all output prior to the shell
prompt, do not currently look for bad patterns in console output. This
patch makes sure that bad patterns are honored everywhere.

One benefit of this change is that if U-Boot sandbox fails to start up,
the error message it emits can be caught immediately, rather than relying
on a (long) timeout when waiting for the expected signon message and/or
command prompt.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:24 -07:00
Stephen Warren
e4119ebb6d test.py: calculate bad patterns on change only
A future patch will use the bad_patterns array in multiple places. Rather
than duplicating the code to calculate it, or even sharing it in a
function and simply calling it redundantly when nothing has changed, only
re-calculate the list when some change is made to it. This reduces work.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:24 -07:00
Stephen Warren
44ac762b14 test/py: fix spawn.expect multiple match handling
Multiple patterns may be passed to spawn.expect(). The pattern which
matches at the earliest position should be designated as the match. This
aspect works correctly. When multiple patterns match at the same position,
priority should be given the the earliest entry in the list of patterns.
This aspect does not work correctly. This patch fixes it.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:24 -07:00
Stephen Warren
26e1beccbe test/dm: clear unit test failure count each run
The ut command prints a test failure count each time it is executed.
This is stored in a global variable which is never reset. Consequently,
the printed failure count accumulates across runs. Fix this by clearing
the counter each time "ut" is invoked.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:24 -07:00
Stephen Warren
d20e5e976f test/py: Provide custom IDs when parametrizing tests
When pytest generates the name for parametrized tests, simple parameter
values (ints, strings) get used directly, but more complex values such
as dicts are not handled. This yields test names such as:

    dfu[env__usb_dev_port0-env__dfu_config0]
    dfu[env__usb_dev_port0-env__dfu_config1]

Add some code to extract a custom fixture ID from the fixture values, so
that we end up with meaningful names such as:

    dfu[micro_b-emmc]
    dfu[devport2-ram]

If the boardenv file doesn't define custom names, the code falls back to
the old algorithm.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:24 -07:00
Stephen Warren
a2ec560647 test/py: Quote consistency
When converting test/py from " to ', I missed a few places (or added a
few inconsistencies later). Fix these.

Note that only quotes in code are converted; double-quotes in comments
and HTML are left as-is, since English and HTML use " not '.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:24 -07:00
Stephen Warren
e8debf394f test/py: use " for docstrings
Python's coding style docs indicate to use " not ' for docstrings.

test/py has other violations of the coding style docs, since the docs
specify a stranger style than I would expect, but nobody has complained
about those yet:-)

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:24 -07:00
Stephen Warren
56382a81f3 test/py: make net test aware of USB and PCI enumeration
The existing net test executes a list of commands supplied by boardenv
variable env__net_pre_commands. The idea was that boardenv would know
whether the Ethernet device was attached to USB, PCI, ... and hence was
the best place to put any commands required to probe the device.

However, this approach doesn't scale well when attempting to use a single
boardenv across multiple branches of U-Boot, some of which require "pci
enum" to enumerate PCI and others of which don't, or don't /yet/ simply
because various upstream changes haven't been merged down.

This patch updates the test to require that the boardenv state which HW
features are required for Ethernet to work, and lets the test itself map
that knowledge to the set of commands to execute. Since this mapping is
part of the test script, which is part of the U-Boot code/branch, this
approach is more scalable. It also feels cleaner, since again boardenv
is only providing data, rather than test logic.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:23 -07:00
Stephen Warren
be1df82656 test/py: dfu: error out if USB device already exists
The DFU test requests U-Boot configure its USB controller in device mode,
then waits for the host machine to enumerate the USB device and create a
device node for it. However, this wait can be fooled if the USB device
node already exists before the test starts, e.g. if some previous software
stack already configured the USB controller into device mode and never
de-configured it. This "previous software stack" could even be another
test/py test, if U-Boot's own USB teardown does not operate correctly. If
this happens, dfu-util may be run before U-Boot is ready to serve DFU
commands, which may cause false test failures.

Enhance the dfu test to fail if the device node exists before it is
expected to.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:23 -07:00
Stephen Warren
e787a58fe2 test/py: make crash detection more robust
test/py contains logic to detect the target crashing and rebooting by
searching the console output for a U-Boot signon message, which will
presumably be emitted when the system boots after the crash/reset.

Currently, this logic only searches for the exact signon message that
was printed by the U-Boot version under test, upon the assumption that
binary is written into flash, and hence will be the version booted after
any reset. However, this is not a valid assumption; some test setups
download the U-Boot-under-test into RAM and boot it from there, and in
such a scenario an arbitrary U-Boot version may be located in flash and
hence run after any reset.

Fix the reset detection logic to match any U-Boot signon message. This
prevents false negatives.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:23 -07:00
Stephen Warren
e5bb279f82 test/py: add a networking test
This tests:
- dhcp (if indicated by boardenv file).
- Static IP network setup (if provided by boardenv file).
- Ping.
- TFTP get.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:23 -07:00
Stephen Warren
0526610334 test/py: move find_ram_base() into u_boot_utils
find_ram_base() is a shared utility function, not a core part of the
U-Boot console interaction.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:23 -07:00
Stephen Warren
f5d196d03e test/py: add DFU test
Add a test of DFU functionality to the Python test suite. The test
starts DFU in U-Boot, waits for USB device enumeration on the host,
executes dfu-util multiple times to test various transfer sizes, many
of which trigger USB driver edge cases, and finally aborts the DFU
command in U-Boot.

This test mirrors the functionality previously available via the shell
scripts in test/dfu, and hence those are removed too.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:23 -07:00
Stephen Warren
d054f4c2cb test/py: ums: add filesystem-based testing
Enhance the UMS test to optionally mount a partition and read/write a file
to it, validating that the content written and read back are identical.

This enhancement is backwards-compatible; old boardenv contents that don't
define the new configuration data will cause the test code to perform as
before.

test/ums/ is deleted since the Python test now performs the same testing
that it did.

The code is also re-written to make use of the recently added utility
module, and split it up into nested functions so the overall logic of
the test process can be followed more easily without the details
cluttering the code.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:23 -07:00
Stephen Warren
76b4693928 test/py: add various utility code
Add various common utility functions. These will be used by a forthcoming
re-written UMS test, and a brand-new DFU test.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:23 -07:00
Stephen Warren
3f2faf7327 test/py: optionally ignore errors from shell commands
Sometimes it's useful to run shell commands and ignore any errors. One
example might be cleanup logic; if a test-case experiences an error, the
cleanup logic might experience an error too, and we don't want that error
to mask the original error, so we want to ignore the subsequent error.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:23 -07:00
Stephen Warren
783cbcd360 test/py: log when tests send CTRL-C
Write a note to the log file when a test sends CTRL-C to U-Boot. This
makes it easier to follow what's happening in the logs, especially since
U-Boot doesn't echo the character back to its output, so there's no other
signal of what's going on.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:23 -07:00
Stephen Warren
c10eb9d39f test/py: drain console log at the end of any failed test
Tests may fail for a number of reasons, and in particular for reasons
other than a timeout waiting for U-Boot to print expected data. If the
last operation that a failed test performs is not waiting for U-Boot to
print something, then any trailing output from U-Boot during that test's
operation will not be logged as part of that test, but rather either
along with the next test, or even thrown away, potentiall hiding clues
re: the test failure reason.

Solve this by explicitly draining (and hence logging) the U-Boot output
in the case of failed tests.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:23 -07:00
Stephen Warren
636f38d83a test/py: move U-Boot respawn trigger to the test core
Prior to this change, U-Boot was lazilly (re-)spawned if/when a test
attempted to interact with it, and no active connection existed. This
approach was simple, yet had the disadvantage that U-Boot might be
spawned in the middle of a test function, e.g. after the test had already
performed actions such as creating data files, etc. In that case, this
could cause the log to contain the sequence (1) some test logs, (2)
U-Boot's boot process, (3) the rest of that test's logs. This isn't
optimally readable. This issue will affect the upcoming DFU and enhanced
UMS tests.

This change converts u_boot_console to be a function-scoped fixture, so
that pytest attempts to re-create the object for each test invocation.
This allows the fixture factory function to ensure that U-Boot is spawned
prior to every test. In practice, the same object is returned each time
so there is essentially no additional overhead due to this change.

This allows us to remove:

- The explicit ensure_spawned() call from test_sleep, since the core now
ensures that the spawn happens before the test code is executed.

- The laxy calls to ensure_spawned() in the u_boot_console_*
implementations.

The one downside is that test_env's "state_ttest_env" fixture must be
converted to a function-scoped fixture too, since a module-scoped fixture
cannot use a function-scoped fixture. To avoid overhead, we use the same
trick of returning the same object each time.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:22 -07:00
Stephen Warren
d314e247e1 test/py: fix timeout to be absolute
Currently, Spawn.expect() imposes its timeout solely upon receipt of new
data, not on its overall operation. In theory, this could cause the
timeout not to fire if U-Boot continually generated output that did not
match the expected patterns.

Fix the code to additionally impose a timeout on overall operation, which
is the intended mode of operation.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-28 21:01:22 -07:00
Simon Glass
ac94b7bcbe dm: syscon: Allow finding devices by driver data
We have a way to find a regmap by its syscon driver data value. Add the same
for syscon itself.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24 12:07:19 +08:00
Simon Glass
747440d0fa dm: video: test: Test that bitmap display works correctly
Add a test for the 'bmp' command. Test both the uncompressed and compressed
versions of the file, since they use different code paths.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
2016-01-20 19:10:16 -07:00
Simon Glass
85e08db85b dm: video: test: Add tests for rotated consoles
Test that text is displayed correctly when the console is rotated.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
2016-01-20 19:10:16 -07:00
Simon Glass
3c97c4fb52 dm: video: test: Add tests for the video uclass
Add tests that check that the video console is working correcty. Also check
that text output produces the expected result. Test coverage includes
character output, wrapping and scrolling.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
2016-01-20 19:10:16 -07:00
Stephen Warren
1c8b4d5f4f test/py: add a test for the sleep command
Execute "sleep", and validate that it sleeps for approximately the correct
amount of time.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-20 19:06:24 -07:00
Stephen Warren
3045d7f043 test/py: test the ums command
This test invokes the "ums" command in U-Boot, and validates that a USB
storage device is enumerated on the test host system, and can be read
from.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-20 19:06:24 -07:00
Stephen Warren
cc156f3fc0 test/py: test the shell if command
Migrate all most tests from command_ut.c into the Python test system.
This allows the tests to be run against any U-Boot binary that supports
the if command (i.e. where hush is enabled) without requiring that
binary to be permanently bloated with the code from command_ut.

Some tests in command_ut.c can only be executed from C code, since they
test internal (more unit-level) features of various U-Boot APIs. The
migrated tests can all operate directly from the U-Boot console.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-20 19:06:23 -07:00
Stephen Warren
8b86c609b8 test/py: add test of basic shell functionality
This tests whether the following features of the U-Boot shell:
- Execution of a directly entered command.
- Compound commands (; delimiter).
- Quoting of arguments containing spaces.
- Executing commands from environment variables.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-20 19:06:23 -07:00
Stephen Warren
98cee89b55 test/py: test the md/mw commands
This tests whether md/mw work, and affect each-other.

Command repeat is also tested.

test/cmd_repeat.sh is removed, since the new Python-based test does
everything it used to.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-20 19:06:23 -07:00