Commit Graph

43992 Commits

Author SHA1 Message Date
Siva Durga Prasad Paladugu
34cc30af27 fs: usbifs: Fix warning in ubifs
This patch fixes the below warning by typecasting it properly
fs/ubifs/ubifs.c: In function 'ubifs_load':
fs/ubifs/ubifs.c:942:29: warning: cast to pointer from integer
of different size [-Wint-to-pointer-cast]
  err = ubifs_read(filename, (void *)addr, 0, size, &actread);

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2017-06-06 07:11:12 +02:00
Tom Rini
ad701b1c91 Prepare v2017.07-rc1
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-05 20:40:22 -04:00
Phil Edworthy
71d2cf2359 armv7m: Fix larger builds
The branch instruction only has an 11-bit relative target address, which
is sometimes not enough.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
2017-06-05 14:13:14 -04:00
Phil Edworthy
111a6af97a arm: Add Kconfig symbols used for Linux asm compatibility
Rather than change asm files that come from Linux, add the symbols
to Kconfig. Since one of the symbols is for thumb2 builds, make
CPU_V7M always select them.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
2017-06-05 14:13:13 -04:00
Michal Simek
a83afb6b1f arm64: hikey: Fix instructions in readme
Fix inaccurate instructions in README.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-05 14:13:13 -04:00
Patrice Chotard
14a50e3736 drivers: ram: stm32: fix compilation issue
If CONFIG_CLK flag is not set, compilation raises the
following error message:

drivers/ram/stm32_sdram.c: In function 'stm32_fmc_probe':
drivers/ram/stm32_sdram.c:154:2: error: 'ret' undeclared (first use in this function)
  ret = stm32_sdram_init(dev);

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
cc: Vikas Manocha <vikas.manocha@st.com>
2017-06-05 14:13:13 -04:00
Michal Simek
439edf6120 arm64: Add NOLOAD attribute NOLOAD to .bss sections
Mark explicitly bss sections to not be loaded at
run time.
The similar patch was done in past by:
"Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections"
(sha1: 64134f0112)

The problem is related to latest toolchain added to Xilinx
v2017.1 design tools where jtag loader is trying to access
ununitialized memory.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-05 14:13:12 -04:00
Michal Simek
3c85417f45 ARMv8: Add support for poweroff via PSCI
Add support for calling poweroff in case of psci is wired.
Based on the same solution as is used for reset.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Move all logic in to fwcall.c as other ARMs implement poweroff
via PMIC]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-05 14:13:12 -04:00
Tom Rini
18b2916585 cmd/ethsw: Disable implicit enum conversion warning
With clang-3.8 we see warnings like:
cmd/ethsw.c:304:6: warning: implicit conversion from
      enumeration type 'enum ethsw_keyword_opt_id' to different enumeration type
      'enum ethsw_keyword_id' [-Wenum-conversion]
                                        ethsw_id_pvid_no,
                                        ^~~~~~~~~~~~~~~~

Because we have one enum for ethsw_keyword_id and a second enum for
ethsw_keyword_opt_id.  This ends up being safe as ethsw_keyword_opt_id
explicitly starts after ethsw_keyword_id enum ends.   Disable the
warning here rather than collapse these into one enum and rely on
comments to denote where optional keywords begin.

Cc: Codrin Ciubotariu <codrin.ciubotariu@freescale.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-06-05 14:13:12 -04:00
Pantelis Antoniou
4e33316f65 malloc: Turn on DEBUG when enabling unit tests
Unit tests require mallinfo which in turn requires DEBUG on
dlmalloc to be enabled.

The dependancy on CONFIG_SANDBOX is wrong.

Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:11 -04:00
Pantelis Antoniou
54cc4dcfda arm: Always keep the dtb section on objcopy
The dtb blob section must always be present in the resulting image.
Either if OF_EMBEDED is used or if unit tests include dtb blobs.

Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:11 -04:00
Keerthy
b12550eb9c board: ti: am571-idx: Add vcores support
Update vcores for am571-idk board.

Reported-by: Steve Kipisz <s-kipisz2@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-05 14:13:11 -04:00
Tom Rini
0f7faf03bf scripts/Makefile.lib: Only apply u-boot.dtsi files in the target directory
We only want to apply files such as 'omap5-u-boot.dtsi', which resides
in arch/arm/dts/ to other files in arch/arm/dts/ and not say
test/overlay/.  Rework the make logic to check for -u-boot.dtsi files in
the same directory as their target dts.

Cc: Simon Glass <sjg@chromium.org>
Reported-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tested-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:10 -04:00
Jean-Jacques Hiblot
7a53a1a811 ARM: ti: Update layout for MMC and eMMC (env and dfu)
The problems with the current DFU layout are:
MMC: The space allocated for u-boot is too small for the latest u-boot
     (>750KB). We need to increase it. eMMC uses a much bigger area (2MB).
eMMC: region "u-boot.img.raw" overlaps the environment area and the region
      "spl-os-image.raw".
both: region "spl-os-image.raw" is quite small and can't handle android
      kernels

Fixing this requires growing some regions and moving others.
Care has been taken to leave some room for further growth of
"spl-os-args.raw".
Also the "env" now appears in the dfu so that it's apparent that the
region is not free space that can be used to grow "u-boot.img.raw".
The MLO region is 0x100 sectors wide but the 0x100 are unused in case the
MLO comes too overflow this areas.
The total space allocated for those raw binaries is 16MB, of which 13+MB
are reserved for the kernel image.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
2017-06-05 14:13:10 -04:00
Tom Rini
226498b8f8 common/spl/Kconfig: Use 'if SPL' / 'if TPL' guards
Much of the entries here simply depend on SPL (or TPL).  Instead of this
redundancy use if SPL / if TPL to guard the rest of the choices and only
show them when we have the relevant option enabled.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-05 14:13:09 -04:00
Simon Glass
a132f77088 bootstage: Record time taken to set up the live device tree
This time is interesting as a comparision with the flat device tree time.
Add it to the record.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:09 -04:00
Simon Glass
824bb1b453 bootstage: Support SPL
At present bootstage only supports U-Boot proper. But SPL can also consume
boot time so it is useful to have the record start there.

Add bootstage support to SPL. Also support stashing the timing information
when SPL finishes so that it can be picked up and reported by U-Boot
proper. This provides a full boot time record, excluding only the time
taken by the boot ROM.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:08 -04:00
Simon Glass
9d2542d062 bootstage: Adjust to use const * where possible
There are a few places that should use const *, such as
bootstage_unstash(). Update these to make it clearer when parameters are
changed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:08 -04:00
Simon Glass
e003310a76 bootstage: Tidy up error return values
We should return a proper error number instead of just -1. This helps the
caller to determine what when wrong. Update a few functions to fix this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:08 -04:00
Simon Glass
63c5bf48d5 bootstage: Record the time taken to set up driver model
Driver model is set up ones before relocation and once after. Record the
time taken in each case.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:07 -04:00
Simon Glass
5ac44a5543 bootstage: Init as early as possible
At present we don't allow use of bootstage before driver model is running.
This means we cannot time the init of driver model itself.

Now that bootstage requires its own board-specific timer, we can move its
init to earlier in the sequence, both before and after relocation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:07 -04:00
Simon Glass
25e7dc6a6a bootstage: Support relocating boostage data
Some boards cannot access pre-relocation data after relocation. Reserve
space for this and copy it during preparation for relocation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:06 -04:00
Simon Glass
ff00226e0b bootstage: Use debug() for stashing messages
We don't normally want to see these messages. Change them to debug-only.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:06 -04:00
Simon Glass
c91001f608 bootstage: Show records with a zero time
We can now use the record count to determine whether a record is valid or
not. Drop the test for a zero time.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:06 -04:00
Simon Glass
03ecac3149 bootstage: Use rec_count as the array index
At present bootstage has a large array with all possible bootstage IDs
recorded. It adds times to the array element indexed by the ID. This is
inefficient because many IDs are not used during boot. We can save space
by only recording those IDs which actually have timestamps.

Update the array to use a record count, which increments with each
addition of a new timestamp. This takes longer to record a time, since it
may involve an array search. Such a search may be particularly expensive
before relocation when the CPU is running slowly or the cache is off. But
at that stage there should be very few records.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:05 -04:00
Simon Glass
cbcd6970ad bootstage: Fix up code style and comments
There are several code style and comment nits. Fix them and also remove
the comment about passing bootstage to the kernel being TBD. This is
already supported.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:05 -04:00
Simon Glass
b383d6c05e bootstage: Convert to use malloc()
At present bootstage uses the data section of the image to store its
information. There are a few problems with this:

- It does not work on all boards (e.g. those which run from flash before
relocation)
- Allocated strings still point back to the pre-relocation data after
relocation

Now that U-Boot has a pre-relocation malloc() we can use this instead,
with a pointer to the data in global_data. Update bootstage to do this and
set up an init routine to allocate the memory.

Now that we have a real init function, we can drop the fake 'reset' record
and add a normal one instead.

Note that part of the problem with allocated strings remains. They are
reallocated but this will only work where pre-relocation memory is
accessible after relocation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:04 -04:00
Simon Glass
5a0e275cbb bootstage: Change CONFIG_BOOTSTAGE_USER_COUNT to an int
There is no good read to make this hex, and integer is more natural for
this type of setting. Update it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:04 -04:00
Simon Glass
c87dc38d8f bootstage: Require timer_get_boot_us() to be defined
At present we provide a default version of this function for use by
bootstage. However it uses the system timer and therefore likely requires
driver model. This makes it impossible to time driver-model init.

Drop the function and require boards to provide their own. Add a sandbox
version also. There is a default implememtation in lib/time.c for boards
which use CONFIG_SYS_TIMER_COUNTER.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:04 -04:00
Simon Glass
9fb34b01f7 bootstage: Provide a default timer function
If CONFIG_SYS_TIMER_COUNTER is used we can provide a default microsecond
timer implementation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:03 -04:00
Lokesh Vutla
9cb5eaf2cf ARM: k2g: Fix passing main pll info for higher speeds
Main pll is marked as arm plls for higher speeds. Fix this.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-06-05 14:13:03 -04:00
Tom Rini
be1b8679ce cmd/elf.c: Support passing arguments with bootelf
The bootelf command could, but does not, pass additional arguments along
on the command line.  Make do_bootelf consume bootelf/flags/address as
needed and then pass along anything else to the ELF application we've
launched.

Reported-by: Thomas Doerfler <thomas.doerfler@embedded-brains.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-05 14:13:03 -04:00
Patrice Chotard
aef5b738c9 reset: sti: add deassert counter in reset channel descriptor
This deassert counter allow to manage "shared" reset lines
encountered in some specific case. On STiH410 SoC, DWC3,
EHCI and OHCI are all using a respective PHY, but all of
these PHYs shared a "global" reset.

Currently, during command "usb stop", all host controller are
stopped (XHCI, EHCI and OHCI). XHCI is first shutdowned, which
means that PHY global reset is asserted. Then EHCI is shutdowned,
but its PHY reset has already been asserted which make handshake()
call failed in ehci_shutdown().

This counter allows to really assert a reset lines only when the
"last" user is asserting it.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:02 -04:00
Michal Simek
5bdb317065 test: py: hush: Add echo dependency
Some tests depends on echo command to be present.

Reported-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-05 14:13:02 -04:00
Michal Simek
a5b548138b test: py: Use global pytestmark for hush tests
All tests in test_hush_if_test depends on hush parser to be
present. This patch simplify test dependencies by using global
pytestmark.

Reported-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2017-06-05 14:13:02 -04:00
Uri Mashiach
dbf0518b60 arm: am57xx: cl-som-am57x: adjust default env to the installation system
The SD card automatic installation system depends on the default
environment of the previous U-Boot.

Add the missing environment variables.

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-05 14:13:01 -04:00
Uri Mashiach
a4e0a63357 ARM: am57xx: cl-som-am57x: support for AM5718
Disable SDRAM controller EMIF2 for single core SOC
Set SDRAM size size to 1GB

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-05 14:13:01 -04:00
Uri Mashiach
729afa8dd8 arm: am57xx: cl-som-am57x: change the shell prompt
Change the shell prompt to "U-Boot# ".

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-05 14:13:00 -04:00
Uri Mashiach
5c291bef30 arm: am57xx: cl-som-am57x: support for FS boot
Supported boot devices are raw QSPI and raw SD card.
Add support for a FAT16/32 file system for SD card.

The SOC's boot ROM only supports FAT file system.
Therefore remove the SPL support for the EXT file system.

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-05 14:13:00 -04:00
Simon Glass
d757975737 common: microblaze: Drop arch-specific declarations
These are not needed and should not be in common.h. Drop them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:00 -04:00
Simon Glass
457e51cffd common: arm: freescale: layerscape: Move header files out of common.h
We should not have an arch-specific header file in common.h. Adjust the
board files a little so it is not needed, and drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:12:59 -04:00
Simon Glass
89f5eaa1ee common: arm: davinci: Move header file out of common
We should not have an arch-specific header file in common.h. Instead, use
the asm/hardware.h header to provide the required declarations, and drop
the common.h changes.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-05 12:31:23 -04:00
Simon Glass
1c16d2e248 common: ep93xx: Move arch-specific declarations out of common
These declarations should not be in common. Remove those that are not
needed and move the others to an arch-specific location.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 12:31:22 -04:00
Simon Glass
68994b98fc common: freescale: Move arch-specific imx code to arch-imx
These declarations should not be in common.h. Move them to an
arch-specific header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 12:31:22 -04:00
Simon Glass
6e2941d787 common: freescale: Move arch-specific declarations
The declarations should not be in common.h. Move them to the arch-specific
headers.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Fixup thinko defined(FSL_LSCH3) -> defined(CONFIG_FSL_LSCH3)]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-05 12:30:55 -04:00
Simon Glass
850431590c common: powerpc: Move arch-specific headers
Set up a new asm/ppc.h header file to hold this arch-specific stuff. It
should not be in common.h. It probably should be refactored to use
asm/arch instead, but that is a job for the maintainer.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 11:02:40 -04:00
Simon Glass
8fb69c1654 common: Move PPC4xx_SYS_INFO() et al to arch-specific header
These definitions should not be in common.h. Move them to an arch-specific
header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 11:02:40 -04:00
Simon Glass
a2038d7b1e common: Drop determine_sysper() and determine_pci_clock_per()
These arch-specific declarations should not be in common.h. Drop them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 11:02:39 -04:00
Simon Glass
e8c8f48dd2 common: Drop cpu_init_f() declarations
These arch-specific functions are not needed here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 11:02:39 -04:00
Simon Glass
b885d02e2c arm: Remove include files from common.h
With a small tweak we can avoid including these files for all boards.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-05 11:02:38 -04:00