Lower case should be used for function names. Update this driver and its
callers accordingly.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Typedefs should not be used in U-Boot and structs should be lower case.
Update the code to use struct ns16550 consistently.
Put a header guard on the file while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
At present the dtoc commmand line is repeated twice in the Makefile. Use a
variable to avoid this, so it is easier to add more conditional arguments.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use the SPL_NAME variable to simplify the rules. Drop the SPL targets
clean-files since the SPL and TPL dts/ directories are removed by
existing rules. Move the SPL rules into a new spl_dtbs to avoid the
complicated $(if) construct.
Also drop unused pieces from the 'targets' variable.
With this, SPL and TPL have separate dtbs which respect the various
u-boot,dm-spl / u-boot,dm-tpl tags.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than putting these in the top-level dts/ directory (which is
intended for U-Boot proper), put them in the correct subdirectory for
SPL (either spl/ or tpl/). This is where other SPL targets are kept,
so this is more consistent.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present both SPL and TPL use the same devicetree binary. While there
is logic to run fdtgrep separately on each one, it does not actually
happen.
Add a new TPL rule and use that instead. Make this rule conditional on
there actually being a TPL. Do the same for SPL for consistency.
Note that the SPL and TPL dtbs are build by a Makefule rule used for
U-Boot proper. This is the 'dtbs' target in dts/Makefile. So the check
for CONFIG_TPL_BUILD in cmd_fdtgrep never actually works at present.
We don't support CONFIG_OF_EMBED for TPL at present.
Signed-off-by: Simon Glass <sjg@chromium.org>
* UEFI capsule authentication
* UEFI capsule update on QEMU ARM
* fsuuid command for FAT file system
* bug fixes
-----BEGIN PGP SIGNATURE-----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=d+Lk
-----END PGP SIGNATURE-----
Merge tag 'efi-next' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi into next
Pull request for UEFI sub-system for next
* UEFI capsule authentication
* UEFI capsule update on QEMU ARM
* fsuuid command for FAT file system
* bug fixes
Add documentation highlighting the steps for using the uefi capsule
update feature for updating the u-boot firmware image.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Add a efidebug subcommand to initiate a firmware update using the efi
firmware management protocol(fmp) set_image routine.
The firmware update can be initiated through
'efidebug capsule disk-update'
This would locate the efi capsule file on the efi system partition,
and call the platform's set_image fmp routine to initiate the firmware
update.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Add support for enabling uefi capsule authentication. This feature is
enabled by setting the environment variable
"capsule_authentication_enabled".
The following configs are needed for enabling uefi capsule update and
capsule authentication features on the platform.
CONFIG_EFI_HAVE_CAPSULE_SUPPORT=y
CONFIG_EFI_CAPSULE_ON_DISK=y
CONFIG_EFI_CAPSULE_FIRMWARE_MANAGEMENT=y
CONFIG_EFI_CAPSULE_FIRMWARE=y
CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
CONFIG_EFI_CAPSULE_AUTHENTICATE=y
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Add support for authenticating uefi capsules. Most of the signature
verification functionality is shared with the uefi secure boot
feature.
The root certificate containing the public key used for the signature
verification is stored as part of the device tree blob. The root
certificate is stored as an efi signature list(esl) file -- this file
contains the x509 certificate which is the root certificate.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
The efi_sigstore_parse_sigdb function reads the uefi authenticated
variable, stored in the signature database format and builds the
signature store structure. Factor out the code for building
the signature store. This can then be used by the capsule
authentication routine to build the signature store even when the
signature database is not stored as an uefi authenticated variable
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
The pkcs7 header parsing functionality is pretty generic, and can be
used by other features like capsule authentication. Make the function
an extern, also changing it's name to efi_parse_pkcs7_header
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Prior to writing to an mtd device, mtd_erase is called. This call
fails in case the sector being erased is locked. Call mtd_unlock to
unlock the region which is to be erased and later written to. Lock the
region once the write to the region has completed.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
When building the capsule using scripts in edk2, a fmp header is
added on top of the binary payload. Add logic to detect presence of
the header. When present, the pointer to the image needs to be
adjusted as per the size of the header to point to the actual binary
payload.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
The fsp_types.h header file contains macros for building signatures of
different widths. These signature macros are architecture agnostic,
and can be used in all places which use signatures in a data
structure. Move and rename the fsp_types.h under the common include
header.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
The dfu framework uses the dfu_alt_info environment variable to get
information that is needed for performing the firmware update. Add
logic to set the dfu_alt_info for the qemu arm64 platform to reflect
the two mtd partitions created for the u-boot env and the firmware
image. This can be subsequently extended for other qemu architectures
which need this variable set.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Add support for setting the default values for mtd partitions on the
platform. This would be used for updating the firmware image using
uefi capsule update with the dfu mtd backend driver.
Currently, values have been defined for the qemu arm64 platform, with
default values defined for the mtd partitions based on the NOR
flash. This can be subsequently extended for other qemu architectures
which need mtdparts set.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
RFC 2315 Section 9.3 describes the message digesting process. The
digest calculated depends on whether the authenticated attributes are
present. In case of a scenario where the authenticated attributes are
present, the message digest that gets signed and is part of the pkcs7
message is computed from the auth attributes rather than the contents
field.
Check if the auth attributes are present, and if set, use the auth
attributes to compute the hash that would be compared with the
encrypted hash on the pkcs7 message.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
On the qemu arm platform, the virtio devices are initialised in the
board_init function, which gets called before the initr_pci. With
this sequence, the virtio block devices on the pci bus are not
initialised. Move the initialisation of the virtio devices to
board_late_init which gets called after the call to initr_pci.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Add options for embedding the public key esl(efi signature list) file
to the platform's dtb. The esl file is then retrieved and used for
authenticating the capsule to be used for updating firmare components
on the platform.
The esl file can now be embedded in the dtb by invoking the following
command
mkeficapsule -K <pub_key.esl> -D <dtb>
In the scenario where the esl file is to be embedded in an overlay,
this can be done through the following command
mkeficapsule -O -K <pub_key.esl> -D <dtb>
This will create a node named 'signature' in the dtb, and the esl file
will be stored as 'capsule-key'
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
When a new event is queued we have to process the event queue by calling
efi_process_event_queue(). But there is not reason to call the function
when the event is not queueable.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Although the function description states the caller must provide a
sufficient buffer, it's better to have in function checks that the
destination buffer can hold the intended value.
So let's add an extra argument with the buffer size and check that
before doing any copying.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Up to now we install the EFI_LOAD_FILE2_PROTOCOL to load an initrd
unconditionally. Although we correctly return various EFI exit codes
depending on the file status (i.e EFI_NO_MEDIA, EFI_NOT_FOUND etc), the
kernel loader only falls back to the cmdline interpreted initrd if the
protocol is not installed.
This creates a problem for EFI installers, since they won't be able to
load their own initrd and start the installation.
A following patch introduces a different logic where we search for an
initrd path defined in an EFI variable named 'Initrd####'.
If the bootmgr is used to launch the EFI payload, we'll will try to match
the BootCurrent value and find the corresponding initrd
(i.e Boot0000 -> Initrd0000 etc). If the file is found, we'll install
the required protocol which the kernel's efi-stub can use and load our
initrd.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
dm.h and env.h serve no purpose here. Remove them and sort the
remaining in alphabetical order.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Do not use data from the loaded image object after deleting it.
Fixes: 126a43f15b ("efi_loader: unload applications upon Exit()")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
load_options passed from do_efibootmgr() to do_bootefi_exec() may contain
invalid data from the stack which will lead to an invalid free().
Fixes: 0ad64007fe ("efi_loader: set load options in boot manager")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Up to now the escape key was not correctly detected in UEFI applications.
We had to hit it twice for a single escape to be recognized.
Use a 10 ms delay to detect if we are dealing with the escape key or an
escape sequence.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
IS_ENABLED() contains parentheses. But we should still put extra
parentheses around it in an if statement for readability.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The FAT file system does not have a UUID but a 4 byte volume ID.
Let the fsuuid command show it in XXXX-XXXX format.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The FAT filesystem implementation uses several marcros referring to a magic
variable name mydata which renders the code less readable. Eliminate one of
them which is only used for a debug() statement.
Use log_debug() instead of debug().
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
When opening an OP-TEE session we need to check the internal return
value of OP-TEE call arguments as well the return code of the
function itself.
The code was also ignoring to close the OP-TEE session in case the
shared memory registration failed.
Fixes: f042e47e8f ("efi_loader: Implement EFI variable handling via OP-TEE")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Currently the size of the buffer to keep UEFI variables in memory is fixed
at 16384 bytes. This size has proven to be too small for some use cases.
Make the size of the memory buffer for UEFI variables customizable.
Reported-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
SPI handling of bus with different-speed devices
patman supression of sign-offs
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl/jZwwRHHNqZ0BjaHJv
bWl1bS5vcmcACgkQfxc6PpAIreaC0AgArETbfTBOS/i14jkpQid6bxw7blQDKbAc
0AdEOUmvp1gLwxnQnVKtWS6sElzbsYCbQDx+HgBoRzrkF23TwhVV6+mowaD4sBJl
c554oYGFDWAVeBEp3jR1IcqbR8Lh+iFb603kcxvpqa8y8cZ66wP1TT/1MwvlpVt3
A08y+XXCtrR9qI3xdzWXIjuaPETNf3oLWIKbldBDkPl0fsDdr5fCcH067/TW2fo4
xXtmhmJ/CKF6U5wSCEUYcrI8JnToqcQ5Iu0YxVSaNNKnPTCse/e39FOBWvi8FzGa
0XaCQ7WlTEfmgiTXReeAS++jVRlPtTYsQKy0rs7fywz8qkRsD+3Rcg==
=4ivx
-----END PGP SIGNATURE-----
Merge tag 'dm-next-23dec20' of git://git.denx.de/u-boot-dm into next
dm: New sequence number implementation
SPI handling of bus with different-speed devices
patman supression of sign-offs
A recent change to unify the flattree/livetree code introduced a small
size increase in SPL on some boards. For example SPL code size for
px30-core-ctouch2-px30 increased by 40 bytes.
To address this we can take advantage of the fact that some of the ofnode
functions are only called a few times in SPL, so it is worth inlining
them.
Add new Kconfig options to control this. These functions are not inlined
for U-Boot proper, since this increases code size.
Fixes: 2ebea5eaeb ("dm: core: Combine the flattree and livetree binding code")
Signed-off-by: Simon Glass <sjg@chromium.org>
Buildman reuses build directories from previous builds to avoid the cost
of 'make mrproper' for every build. If the previous build produced an SPL
image but the current one does not, the SPL image will remain and buildman
will think it is a result of building the current board.
Remove these files before building, to avoid this problem.
Signed-off-by: Simon Glass <sjg@chromium.org>
Remove setting slave->dev to NULL after the device_remove() call.
The slave pointer points to dev->parent_priv, which has already
been freed by device_free(), called from device_remove() in the
preceding line. Writing to slave->dev may cause corruption of the
dlmalloc free chunk forward pointer of the previously freed chunk.
Signed-off-by: Niel Fourie <lusus@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add testcase for spi_claim_bus(), which checks that sandbox spi bus
speed/mode settings are updated correctly when multiple slaves use
the bus consecutively. The following configurations are used for the
two spi slaves involved:
* different max_hz / different modes
* different max_hz / same modes
* different modes / same max_hz
asm/test.h header is added in order to be able to retrieve the current
speed/mode of the sandbox spi bus, via sandbox_spi_get_{speed, mode}.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Currently, when different spi slaves claim the bus consecutively using
spi_claim_bus(), spi_set_speed_mode() will only be executed on the first
two calls, leaving the bus in a bad state starting with the third call.
This patch drops spi_slave->speed member and adds caching of bus
speed/mode in dm_spi_bus struct. It also updates spi_claim_bus() to call
spi_set_speed_mode() if either speed or mode is different from what the
bus is currently configured for. Current behavior is to only take into
account the speed, but not the mode, which seems wrong.
Fixes: 60e2809a84 ("dm: spi: Avoid setting the speed with every transfer")
Reviewed-by: Simon Glass <sjg@chromium.org>
Reported-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reported-by: Moshe, Yaniv <yanivmo@amazon.com>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Introduce sandbox_spi_get_{speed, mode} public interface to retrieve the
sandbox spi bus internal state. They are meant to be used in sandbox spi
testcases.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Implement sandbox_spi_set_{speed, mode} routines, to be able to keep track
of the current bus speed/mode. This will help determine whether the values
passed from dm_spi_claim_bus() are valid.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Place a second spi slave on the sandbox_spi bus, to be used by the
spi_claim_bus() testcase we are about to introduce. We need to make sure
that jumping between slaves calling spi_claim_bus() sets the bus speed and
mode appropriately. Use different max-hz and mode properties for this new
slave.
Also, update sandbox_spi cs_info call to allow activity on CS0/CS1 and
adapt dm_test_spi_find() testcase for this new setup.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Commit 1289e96797 ("sandbox: spi: Drop command-line SPI option") dropped
support for specifying SPI devices on the command line, removing the only
user of sandbox_spi_parse_spec(). Remove the function too.
Fixes: 1289e96797 ("sandbox: spi: Drop command-line SPI option")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Before executing code that we have loaded from a file we need to flush the
data cache and invalidate the instruction flash.
Implement functions flush_cache() and invalidate_icache_all().
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
While assigning the sequence number to subsystem instances by reading the
aliases property, only DT nodes names are compared and not the complete
path. This causes a problem when there are two DT nodes with same name but
have different paths.
In arch/arm/dts/k3-am65-main.dtsi there are two USB controllers with the
same device tree node name but different path. When aliases are defined for
these USB controllers then fdtdec_get_alias_seq() fails to pick the correct
instance for a given index.
fdt_path_offset() function is slow and this would effect the U-Boot
startup. To avert the time penalty on all boards, apply this extra check
only when required by using a config option.
Fix it by comparing the phandles of DT nodes after the node names match,
under a config option.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Fix whitespace error in Kconfig:
Signed-off-by: Simon Glass <sjg@chromium.org>
Check for negative return value of fdt_noffset from calling
boot_get_fdt_fit().
Signed-off-by: Hongwei Zhang <hongweiz@ami.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Implement a reset function that we can call after ExitBootServices(),
when all driver model devices are gone.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add CONFIG_DEBUG_UART=y for all sandbox defconfig
as it is already done in sandbox_defconfig.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
