Commit Graph

2323 Commits

Author SHA1 Message Date
Haavard Skinnemoen
12f099c081 AVR32: Use initdram() instead of board_init_memories()
Conform to the "standard" interface and use initdram() instead of
board_init_memories() on AVR32. This enables us to get rid of the
sdram_size member of the global_data struct as well.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-14 15:20:27 +02:00
Haavard Skinnemoen
1f4f2121c2 AVR32: Relocate u-boot to SDRAM
Relocate the u-boot image into SDRAM like everyone else does. This
means that we can handle much larger .data and .bss than we used to.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-14 15:20:27 +02:00
Haavard Skinnemoen
df548d3c3e AVR32: Resource management rewrite
Rewrite the resource management code (i.e. I/O memory, clock gating,
gpio) so it doesn't depend on any global state. This is necessary
because this code is heavily used before relocation to RAM, so we
can't write to any global variables.

As an added bonus, this makes u-boot's memory footprint a bit smaller,
although some functionality has been left out; all clocks are enabled
all the time, and there's no checking for gpio line conflicts.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-14 15:20:27 +02:00
Haavard Skinnemoen
03d1e13657 AVR32: Clean up memory-map.h for at32ap7000
Convert spaces to tabs (must have missed this one last time around),
sort the entries by address and group them together by bus
connectivity.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-14 15:20:27 +02:00
Haavard Skinnemoen
28c699ef69 AVR32: Build position-independent u-boot
Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
position independent. This will make relocation a lot easier.

-mno-init-got means that gcc shouldn't emit code to load the GOT
address into r6 in every function prologue. We do it once and for
all in the early startup assembly code, so enabling this option
makes u-boot a bit faster and smaller.

The assembly parts have always been position-independent, so no code
changes should be necessary.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-14 15:20:27 +02:00
Haavard Skinnemoen
5374b36de9 AVR32: Use avr32-linux- cross-compilation prefix by default
It doesn't really matter which toolchain you use to compile u-boot,
but the avr32-linux one is probably what most people have installed.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-14 15:20:27 +02:00
Haavard Skinnemoen
c841beedde AVR32: Split start_u_boot into board_init_f and board_init_r
Split the avr32 initialization code into a function to run before
relocation, board_init_f and a function to run after relocation,
board_init_r. For now, board_init_f simply calls board_init_r
at the end.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-14 15:20:20 +02:00
Wolfgang Denk
6c9ba91937 Update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-04-11 17:25:01 +02:00
Wolfgang Denk
51056dd986 Update for SC3 board
* Make IDE timeout configurable through ide_reset_timeout variable.
* Use Newline as "password" string
* Use just a single partition in NAND flash
2007-04-11 17:22:55 +02:00
Wolfgang Denk
25b0806fff Merge with /home/wd/git/u-boot/custodian/u-boot-ppc4xx 2007-04-04 02:18:56 +02:00
Wolfgang Denk
31c98a8822 Minor coding style cleanup. 2007-04-04 02:09:30 +02:00
Wolfgang Denk
c8f2280162 Merge with /home/wd/git/u-boot/custodian/u-boot-microblaze 2007-04-04 02:05:48 +02:00
Wolfgang Denk
94abd7c058 Minor cleanup. 2007-04-04 01:49:15 +02:00
Gerald Van Baren
aea03c4e8c Fix some minor whitespace violations. 2007-03-31 14:30:53 -04:00
Gerald Van Baren
213bf8c822 Add a flattened device tree (fdt) command (2 of 2)
Modifications to the existing code to support the new fdt command.
2007-03-31 12:23:51 -04:00
Gerald Van Baren
781e09ee6e Add a flattened device tree (fdt) command (1 of 2)
The fdt command uses David Gibson's libfdt library to manipulate as well
as print the flattened device tree.  This patch is the new command,
the second part is the modifications to the existing code.
2007-03-31 12:22:10 -04:00
Gerald Van Baren
3af0d587d9 libfdt: Enhanced and published fdt_next_tag()
Enhanced the formerly private function _fdt_next_tag() to allow stepping
  through the tree, used to produce a human-readable dump, and made
  it part of the published interface.
Also added some comments.
2007-03-31 12:13:43 -04:00
Gerald Van Baren
fa3a74cec7 libfdt: Customizations for use by u-boot.
Changes to David Gibson's original source to fit into u-boot's
environment.  No functionality changes.
2007-03-31 12:05:39 -04:00
Gerald Van Baren
35748177c6 libfdt: Import libfdt source (2 of 2)
This adds the applicable libfdt source files (unmodified) and a README
to explain where the source came from.
2007-03-31 12:00:56 -04:00
Gerald Van Baren
7cd5da0fe8 libfdt: Import libfdt source (1 of 2)
This adds the applicable libfdt source files (unmodified) and a README
to explain where the source came from.
2007-03-31 11:59:59 -04:00
Stefan Roese
0e7d4916af Merge with git://www.denx.de/git/u-boot.git 2007-03-31 13:44:12 +02:00
Stefan Roese
da6ebc1bc0 ppc4xx: Update Katmai bootstrap command
Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
is selected.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-03-31 13:16:23 +02:00
Stefan Roese
cabee756a6 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
Additional RAM information is now printed upon powerup, like
DDR2 frequency and CAS latency.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-03-31 13:15:06 +02:00
Stefan Roese
6072380343 ppc4xx: Change Yucca config file to support ECC
With the updated 44x DDR2 driver the Yucca board now supports
ECC generation and checking.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-03-31 08:48:36 +02:00
Stefan Roese
490e5730c6 ppc4xx: Fix "bootstrap" command for Katmai board
The board specific "bootstrap" command is now fixed and can
be used for the AMCC Katmai board to configure different
CPU/PLB/OPB frequencies.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-03-31 08:47:34 +02:00
Stefan Roese
94f54703c3 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
Fix a bug in the auto calibration routine. This driver now runs
more reliable with the tested modules. It's also tested with
167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-03-31 08:46:08 +02:00
Michal Simek
342cd097be [PATCH] Clean include dependence 2007-03-30 22:52:09 +02:00
Michal Simek
6f934210fb [CLEAN] Remove inefficient Suzaku code 2007-03-30 22:42:45 +02:00
Wolfgang Denk
6db7d0af23 Merge with /home/wd/git/u-boot/custodian/u-boot-mpc86xx 2007-03-29 12:16:41 +02:00
Stefan Roese
430f1b0f9a Merge some AMCC make targets to keep the top-level Makefile smaller
Signed-off-by: Stefan Roese <sr@denx.de>
2007-03-28 15:03:16 +02:00
Stefan Roese
0c75c9d843 i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined
The "old" i2c commands (iprobe, imd...) are now compiled in again,
even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
config option.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-03-28 14:52:12 +02:00
Michal Simek
5da048adf4 PATCH: Resolve GPL license problem 2007-03-27 00:32:16 +02:00
Michal Simek
1798049522 Support for XUPV2P board
Reset support
BSP autoconfig support
2007-03-26 01:39:07 +02:00
Stefan Roese
e50b791b3f Merge with /home/stefan/git/u-boot/acadia 2007-03-24 15:59:23 +01:00
Stefan Roese
0d974d5297 [PATCH] Add 4xx GPIO functions
This patch adds some 4xx GPIO functions. It also moves some of the
common code and defines into a common 4xx GPIO header file.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-03-24 15:57:09 +01:00
Stefan Roese
2db633658b [PATCH] Small Sequoia cleanup
Signed-off-by: Stefan Roese <sr@denx.de>
2007-03-24 15:55:58 +01:00
Stefan Roese
3cb86f3e40 [PATCH] Clean up 40EZ/Acadia support
This patch cleans up all the open issue of the preliminary
Acadia support.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-03-24 15:45:34 +01:00
Jon Loeliger
6eb1df8351 Fix 8641HPCN problem with ld version 2.16
(Dot outside sections problem).

This fix is in the spirit of 807d5d7319.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-03-22 11:39:40 -05:00
Haiying Wang
9964a4dd0d Set Rev 2.x 86xx PIC in mixed mode.
Prevent false interrupt from hanging Linux as MSR[EE] is set
to enable interrupts by changing the PIC out of the default
pass through mode into mixed mode.

Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-03-22 11:02:35 -05:00
Jason Jin
5a58a73ceb Add flash cmd function to 8641HPCN ramboot
Also fixes some commmand for 8641 HPCN ramboot case.

Signed-off-by: Jason Jin <jason.jin@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-03-22 11:02:34 -05:00
Ed Swarthout
2ccceacc04 Add support for 8641 Rev 2 silicon.
Without this patch, I am unable to get to the prompt on rev 2 silicon.
Only set ddrioovcr for rev1.

Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-03-22 11:02:34 -05:00
Wolfgang Denk
44ba464b99 Code cleanup / re-insert previous Copyright entries.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-03-22 00:13:12 +01:00
Wolfgang Denk
a17824c749 Merge with /home/wd/git/u-boot/custodian/u-boot-blackfin 2007-03-22 00:00:03 +01:00
Wolfgang Denk
2a8dfe0835 Code cleanup. Update CHANGELOG 2007-03-21 23:26:15 +01:00
Wolfgang Denk
40750952c7 Merge with /home/wd/git/u-boot/custodian/u-boot-ppc4xx 2007-03-21 23:11:22 +01:00
Stefan Roese
e6615ecf4e ppc4xx: Fix file mode of include/configs/acadia.h
Signed-off-by: Stefan Roese <sr@denx.de>
2007-03-21 14:54:29 +01:00
Markus Klotzbuecher
d5f4614c93 SPC1920: fix small clock routing bug
Signed-off-by: Markus Klotzbuecher <mk@denx.de>
2007-03-21 14:41:46 +01:00
Stefan Roese
fc1e45ce6e Merge with /home/stefan/git/u-boot/acadia 2007-03-21 14:38:25 +01:00
Stefan Roese
16c0cc1c82 [PATCH] Add AMCC Acadia (405EZ) eval board support
This patch adds support for the new AMCC Acadia eval board.

Please note that this Acadia/405EZ support is still in a beta stage.
Still lot's of cleanup needed but we need a preliminary release now.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-03-21 13:39:57 +01:00
Stefan Roese
e01bd218b0 [PATCH] Add AMCC PPC405EZ support
This patch adds support for the new AMCC 405EZ PPC. It is in
preparation for the AMCC Acadia board support.

Please note that this Acadia/405EZ support is still in a beta stage.
Still lot's of cleanup needed but we need a preliminary release now.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-03-21 13:38:59 +01:00