Commit Graph

33258 Commits

Author SHA1 Message Date
Mugunthan V N
11e1582506 omap_hsmmc: update struct hsmmc to accomodate base address from DT
Existing driver gets the actual omap hammc base address + 0x100
bytes as the first 0x100 bytes is not used by the driver. But
with DM conversion the base address from DT is different, to
accommodate the offset adding res0[0x100] to struct hsmmc.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-10-22 14:22:28 -04:00
Mugunthan V N
e5520e188b dra7xx: Add dra74_evm_defconfig using CONFIG_DM
Import various DT files for dra7-evm from Linux Kernel v4.2
Add config file for this board, enable DM and DM_GPIO

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-10-22 14:22:28 -04:00
Lokesh Vutla
b9ca4ab453 ARM: k2g: Add config file
Add config file for k2g

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
2015-10-22 14:22:27 -04:00
Lokesh Vutla
2a9a842ebe ARM: dts: k2g: Add DT support
Add basic DT support for k2g evm.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:22:26 -04:00
Lokesh Vutla
83b9bf11fe ARM: k2g: Enable SPI flash
GPIO1_9 controls SPI flash on k2g evm.
So make GPIO1_9 as output pin, inorder to use SPI.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:22:26 -04:00
Roger Quadros
3b68939fa0 ARM: k2g: add SD card and eMMC support
Add MMC support for k2g

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Tested-by: Mugunthan V N <mugunthanvnm@ti.com>
2015-10-22 14:22:25 -04:00
Vitaly Andrianov
91266ccbb2 ARM: k2g: Add Ethernet Support
Add Ethernet support for tftp support

Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:22:24 -04:00
Mugunthan V N
997a318b30 driver: net: keystone_net: removing unused code
remove unused code as the same is achieved when configuring sgmii
and link status is verifed.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:22:24 -04:00
Vitaly Andrianov
4657a2d44e driver: net: keystone_net: add support for rgmii phy
In K2G, Ethernet doesn't support SGMII instead it support RGMII,
adding support to the driver to connect to RGMII phy.

Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:22:23 -04:00
Vitaly Andrianov
bc3003b999 dma: keystone_nav: Fix linkram size
Fix Linkram size.

Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:22:22 -04:00
Mugunthan V N
bf7bd4e725 driver: net: keystone_net: fix phy mode configuration
Phy mode is a board property and it can be different between
multiple board and ports, so it should not be hardcoded in
driver to one specific mode. So adding a field in eth_priv_t
structure to pass phy mode to driver.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:22:22 -04:00
Vitaly Andrianov
cddb330035 ARM: k2g: update keystone nav rx queue numbers
update K2G nav rx queue number

Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:22:21 -04:00
Vitaly Andrianov
11d8222a26 ARM: k2g: Correct base addresses
Coreect base addresses for SPI, Queue Manager, Ethernet, GPIO,
and MSMC segments.

Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:22:20 -04:00
Vitaly Andrianov
dd78b8cf30 ARM: k2g: Add pin mux data
Add pin mux data for k2g-evm

Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:22:19 -04:00
Vitaly Andrianov
5dd6af2ecb ARM: k2g: Add support for pin mux configuration
Add api for configuring pin mux.

Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:22:19 -04:00
Vitaly Andrianov
235dd6e8d1 ARM: k2g: Add ddr3 info
Add ddr3 related info

Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:22:18 -04:00
Vitaly Andrianov
0fba27b690 ARM: k2g: Add PSC info
Add psc information for k2g

Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:22:17 -04:00
Vitaly Andrianov
e6d71e1ca5 ARM: k2g: Add clock information
Add clock information for Galileo

Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
2015-10-22 14:22:16 -04:00
Vitaly Andrianov
bda920c65e ARM: k2g: Add pll data
Add pll data for k2g

Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:22:15 -04:00
Lokesh Vutla
f9c4a51c3e ARM: k2g: Add kconfig support
Add Kconfig support

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:22:13 -04:00
Lokesh Vutla
f11a328b54 ARM: k2g: Add support for CPU detection
Adding CPU detection support for Keystone2 Galileo.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:22:12 -04:00
Lokesh Vutla
1985abe207 ARM: keystone2: Use dtb images by default
Now that OF_CONTROL is enabled on all keystone2 platforms,
build the default images with DT.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:22:11 -04:00
Lokesh Vutla
16d7f5b51a ARM: dts: k2e: Enable OF_CONTROL and DM
Import k2e specific DT files from Linux Kernel and enable
OF_CONTROL, DM, DM_SERIAL.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:22:11 -04:00
Lokesh Vutla
cec6a6bf1d ARM: dts: k2l: Enable OF_CONTROL and DM
Import k2l specific DT files from Linux Kernel and enable
OF_CONTROL, DM, DM_SERIAL.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:21:39 -04:00
Lokesh Vutla
391839fb04 ARM: dts: k2hk: Enable OF_CONTROL and DM
Import k2hk specific DT files from Linux Kernel and enable
OF_CONTROL, DM, DM_SERIAL.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:20:35 -04:00
Lokesh Vutla
8a9bb065da ARM: dts: keystone2: Do not use LPAE addresses in U-Boot
Keystone dts files assumes that LPAE is enabled and top level root
node uses 64bit addresses. This breaks the keystone boot with
CONFIG_OF_CONTROL enabled. So do not use 64 bit addresse in U-Boot DT.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:19:51 -04:00
Lokesh Vutla
351f969088 ARM: dts: Keystone2: Import generic dt files from Linux Kernel
Import various generic dts files from Linux kernel so that
all keystone2 platforms can be DT in U-boot.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:19:50 -04:00
Lokesh Vutla
aaf461f9ad ARM: keystone2: spl: Fix stack allocation with CONFIG_SYS_MALLOC_F_LEN
If CONFIG_SYS_MALLOC_F_LEN is enabled, the stack is moved down to the
specified size to make the malloc function available before relocation.
But on keystone platforms SYS_SPL_MALLOC is immediately preceding stack,
which is causing an overlap with this config enabled.
So leave a gap between malloc space and stack space.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:19:50 -04:00
Lokesh Vutla
8c80b1937b ARM: keystone2: Fix serial port init
With CONFIG_DM_SERIAL is enabled NS16550_init() cannot be
called directly. Driver probe should be taking care of this.
So call this function only when DM_SERIAL is not enabled.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:19:49 -04:00
Tom Rini
0b06932cc3 dra72_evm: Switch to DM_SERIAL
Tested on J6Eco EVM.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tested-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-22 14:19:49 -04:00
Tom Rini
01e870b70f ti_omap5_common.h: Switch to CONFIG_OMAP_SERIAL for non-SPL DM_SERIAL
Tested on J6Eco EVM
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-10-22 14:18:41 -04:00
Tom Rini
53ee6342b8 ti_omap4_common.h: Switch to CONFIG_OMAP_SERIAL for non-SPL DM_SERIAL
Tested on Pandaboard
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-10-22 14:18:40 -04:00
Nishanth Menon
bfaa2d99dc test: Add basic tests for remoteproc
Use the sandbox environment for the basic tests.

Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-22 14:18:40 -04:00
Nishanth Menon
5215940f59 sandbox: Introduce dummy remoteproc nodes
Introduce dummy devices for sandbox remoteproc device and enable it by
default

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-22 14:18:39 -04:00
Nishanth Menon
3df0b8b4da remoteproc: Introduce a sandbox dummy driver
Introduce a dummy driver for sandbox that allows us to verify basic
functionality. This is not meant to do anything functional - but is
more or less meant as a framework plumbing debug helper.

The sandbox remoteproc driver maintains absolutey no states and is a
simple driver which just is filled with empty hooks. Idea being to give
an approximate idea to implement own remoteproc driver using this as a
template.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-22 14:18:39 -04:00
Nishanth Menon
ddf56bc7e3 drivers: Introduce a simplified remoteproc framework
Many System on Chip(SoC) solutions are complex with multiple processors
on the same die dedicated to either general purpose of specialized
functions. Many examples do exist in today's SoCs from various vendors.
Typical examples are micro controllers such as an ARM M3/M0 doing a
offload of specific function such as event integration or power
management or controlling camera etc.

Traditionally, the responsibility of loading up such a processor with a
firmware and communication has been with a High Level Operating
System(HLOS) such as Linux. However, there exists classes of products
where Linux would need to expect services from such a processor or the
delay of Linux and operating system being able to load up such a
firmware is unacceptable.

To address these needs, we need some minimal capability to load such a
system and ensure it is started prior to an Operating System(Linux or
any other) is started up.

NOTE: This is NOT meant to be a solve-all solution, instead, it tries to
address certain class of SoCs and products that need such a solution.

A very simple model is introduced here as part of the initial support
that supports microcontrollers with internal memory (no MMU, no
execution from external memory, or specific image format needs). This
basic framework can then (hopefully) be extensible to other complex SoC
processor support as need be.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-22 14:18:38 -04:00
Mugunthan V N
0da3f2e695 defconfig: am335x: gp_evm: enable ethernet driver model
enable ethernet driver model for am335x gp evm as cpsw supports
driver model

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-10-22 14:18:36 -04:00
Mugunthan V N
0c615e35aa defconfig: am335x: bbb: enable ethernet driver model
enable ethernet driver model for am335x beagle bone black as cpsw
supports driver model

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-10-22 14:18:35 -04:00
Mugunthan V N
4cc77895eb drivers: net: cpsw: convert driver to adopt device driver model
adopt cpsw driver to device driver model

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-22 14:18:35 -04:00
Mugunthan V N
bcd5eedf8f drivers: net: cpsw: prepare driver for device model migration
prepare driver for device model migration

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-22 14:18:34 -04:00
Mugunthan V N
09bf4f2454 am335x_evm: do not define usb ether gadget when Eth DM is defined
Since usb ether gadget doesn't have support for driver model, so
not defining usb ether gadget when ethernet driver model is
defined.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-10-22 14:18:34 -04:00
Mugunthan V N
bd83e3df45 am335x_evm: prepare for eth driver model support
Prepare board file so that ethernet registration are
commented for DM conversion

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-10-22 14:18:33 -04:00
Sjoerd Simons
bc3199fd18 configs: am335x_evm: Support distro bootcmds
Add support for distro bootcmds and network booting while retaining
backwards compatibility with the current "legacy" setup. With these
changes the default boot sequence becomes:

* SD card (standard distro boot)
* SD card (legacy boot)
* EMMC (standard distro boot)
* EMMC (legacy boot)
* Nand (legacy boot)
* PXE (standard distro boot)
* DHCP (standard distro boot)

The older boot scripts have some overlap with what the distro
bootcommands to however i've left them unchanged to prevent introduction
of subtle bugs.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
2015-10-22 14:18:33 -04:00
Sjoerd Simons
7749b67f6c configs: ti_armv7_common.h: Add default addresses for pxe and scripts
Add mandatory address variables for loading scripts and pxe configuration as
per README.distro

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
2015-10-22 14:18:32 -04:00
Sjoerd Simons
59d03cb377 config_distro_bootcmd.h: Use a private variable for bootpart
Hush has an oddity where using ${var} causes var to resolved in the the global
address space (iotw the environment) first and only afterwards will the local
variable space be searched.

This causes odd side-effects when iterating over the boot partitions
using ${bootpart} if the environment also has a bootpart variable (e.g. for
the various TI boards). Fix this by using the hopefully more unique
${distro_bootpart} instead of ${bootpart}.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2015-10-22 14:18:31 -04:00
Paul Kocialkowski
2da87ab353 omap-common: Common get_board_serial function to pass serial through ATAG
Since there is a common function to grab the serial number from the die id bits,
it makes sense have one to parse that serial number and feed it to the serial
ATAG.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-10-22 14:18:31 -04:00
Paul Kocialkowski
679f82c349 omap-common: Common function to display die id, replacing omap3-specific version
This introduces omap_die_id_display to display the full die id.
There is no need to store it in an environment variable, that no boot script
is using anyway.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-10-22 14:18:30 -04:00
Paul Kocialkowski
07815eb9f3 omap-common: Common serial and usbethaddr functions based on die id
Now that we have a common prototype to grab the omap die id, functions to figure
out a serial number and usb ethernet address can use it directly.
Those also get an omap_die_id prefix for better consistency.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-10-22 14:17:22 -04:00
Paul Kocialkowski
9fd5401659 omap5: omap_die_id support
This introduces omap5 support for omap_die_id, which matches the common
omap_die_id definition. It replaces board-specific code to grab the die id bits.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-10-22 14:17:21 -04:00
Paul Kocialkowski
987a40d52e omap4: omap_die_id support
This introduces omap4 support for omap_die_id, which matches the common
omap_die_id definition. It replaces board-specific code to grab the die id bits.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-10-22 14:17:20 -04:00