Wolfgang Denk
0f18cb6eef
Minor fixes for PPChameleon Board:
...
* fix alignment of NAND size
* make code do what the comment says
2005-07-31 00:30:09 +02:00
Wolfgang Denk
cf99192394
Add missing CHANGELOG entry
2005-07-30 16:45:16 +02:00
Wolfgang Denk
010162eb72
Implement h/w sector protection status synchronization at boot.
...
The code is provided for, and was tested on, the Yukon/Alaska
and PM520 boards only.
A bug in flash_real_protect() for the Yukon board was fixed by adding
a function that tells if two banks are on one flash chip.
2005-07-30 16:39:27 +02:00
Wolfgang Denk
15f36a5efd
Fix sysmon POST problem: check I2C error codes
...
This fixes a problem of displaying bogus voltages when the voltages
are so low that the I2C devices start failing while the rest of the
system keeps running.
2005-07-28 10:42:26 +02:00
Wolfgang Denk
e82bc62c03
Fix CFG_CMD_SETGETDCR handling in "common/cmd_dcr.c"
...
[Patch by Cedric Vincent, 6 Jul 2005]
2005-07-28 01:50:14 +02:00
Wolfgang Denk
2d5df63e4f
Patch by Jon Loeliger, 20 Jul 2005:
...
Add missing PCI IO port definitions.
author Kumar Gala <kumar.gala@freescale.com> Wed, 20 Jul 2005 15:39:52 -0500
committer Jon Loeliger <jdl@freescale.com> Wed, 20 Jul 2005 15:39:52 -0500
2005-07-21 16:14:36 +02:00
Wolfgang Denk
1a79473bde
Add missing CHANGELOG entry.
2005-07-21 15:29:22 +02:00
Wolfgang Denk
08abe15850
Add CompactFlash support for HMI1001 board.
2005-07-21 15:23:29 +02:00
Wolfgang Denk
ee073a558b
Adjust printed board ID for LWMON board.
2005-07-21 13:53:44 +02:00
Wolfgang Denk
9c998aa831
Fix low-level OHCI transfers for ARM920t and MPC5xxx
...
A new, Windows compatible init sequence was also backported from Linux 2.6,
but disabled with #undef NEW_INIT_SEQ as it wouldn't change the behaviour
of the memopry sticks we tested. Maybe it's not relevant for mass storage
devices. For recerence, see file common/usb.c, function usb_new_device(),
section #ifdef NEW_INIT_SEQ.
2005-07-21 11:57:57 +02:00
Wolfgang Denk
f530187dbd
Add new argument format for flash commands to allow for usage like
...
"erase $(addr) +$(filesize)", i. e. a size argument can be used and
U-Boot will automaticially find the end of the corresponding sector.
2005-07-21 11:45:50 +02:00
Wolfgang Denk
3bb9cec962
Fix file permissions
2005-07-21 11:22:21 +02:00
stroese
cd5b2b9941
* Patch by Stefan Roese, 5 Jul 2005:
...
Update uc100 board PHY setup
2005-07-05 11:35:27 +00:00
wdenk
88804d19e2
* Patch by Detlev Zundel, 30 Jun 2005:
...
Fix LCD logo for lwmon board which got lost in the merge of 8xx and PXA LCD code
2005-07-04 00:03:16 +00:00
stroese
3c71f3e8aa
* Patch by Stefan Roese, 1 Jul 2005:
...
Fix PHY address for CATcenter board (now correct!)
2005-07-01 15:53:57 +00:00
stroese
bf41886f9d
* Patch by Stefan Roese, 30 Jun 2005:
...
Fix PHY addresses for PPChameleon and CATcenter boards
Change MAINTAINER for most esd boards
2005-06-30 13:06:07 +00:00
wdenk
342717f72a
* Fix baudrate calculation problem on MPC5200 systems
...
* Add MPC8220 boards to MAKEALL script
* Add EEPROM and RTC support for HMI1001 board
* Patch by Detlev Zundel, 20 Jun 2005:
Fix initialization of low active GPIO pins on inka4x0 board
2005-06-27 13:30:03 +00:00
wdenk
024447b186
Enable redundant environment, disable HW flash protection of HMI1001 board
2005-06-20 10:28:38 +00:00
wdenk
b2532eff87
* Patch by Travis Sawyer, 10 Jun 2005:
...
Initialize allocated dev and private hw structures
after their respective allocation in 440gx_enet.c
* Patch by Steven Scholz, 10 Jun 2005:
Fix byteorder problems with second argument of "bootm" with
standalone images;
2005-06-20 10:17:34 +00:00
wdenk
a87589da74
* Add support for HMI1001 board
...
* Disable "date" and "sntp" commands on TQM866M which has no RTC
2005-06-10 10:00:19 +00:00
wdenk
51152c173d
Fix watchdog reset problems on LWMON board
2005-06-05 20:30:43 +00:00
wdenk
ba91e26a19
Patch by Juergen Selent, 17 May 2005:
...
Add support for Funkwerk VoVPN gateway module.
2005-05-30 23:55:42 +00:00
wdenk
2eab48f511
* Extend burst mode RAM test program to take a loop count
...
(0 = infinite)
* Use CONFIG_DRIVER_KS8695ETH to enable KS8695 ethernet driver on
those boards that use it.
2005-05-23 10:49:50 +00:00
wdenk
16b013e750
Patch by Greg Ungerer, 19 May 2005:
...
add support for the OpenGear CM4008 board
2005-05-19 22:46:33 +00:00
wdenk
121fc64022
Patch by Greg Ungerer, 19 May 2005:
...
add support for the OpenGear CM4008 board
2005-05-19 22:46:33 +00:00
wdenk
3a574cbe72
* Patch by Greg Ungerer, 19 May 2005:
...
add support for the KS8695P (ARM 922 based) CPU
* Patch by Steven Scholz, 19 May 2005:
Add support for CONFIG_SERIAL_TAG on ARM boards
2005-05-19 22:39:42 +00:00
wdenk
7680c140af
Add PCI support for Sorcery board.
...
Code cleanup (especially Sorcery / Alaska / Yukon serial driver).
2005-05-16 15:23:22 +00:00
wdenk
c01766307c
Fix compile problems caused by new burst mode SDRAM test;
...
make port pins to trigger logic analyzer configurable
2005-05-16 14:19:49 +00:00
wdenk
343117bf12
Fix timer handling on MPC85xx systems
2005-05-13 22:49:36 +00:00
wdenk
9dd41a7b0c
* Fix debug code in omap5912osk flash driver
...
* Add support for MPC8247 based "IDS8247" board.
2005-05-12 22:48:09 +00:00
wdenk
d44e14b5fc
Add support for 2 x TSEC interfaces on the TQM8540 board.
2005-05-10 15:51:35 +00:00
wdenk
ed16fefcba
On LWMON we must use the watchdog to reset the board as the CPU
...
genereated HRESET pulse is too short to reset the external circuitry.
2005-05-09 10:17:32 +00:00
wdenk
931da93e0f
Add test tool to exercise SDRAM accesses in burst mode
...
(as standalone program, MPC8xx/PowerPC only)
2005-05-07 19:06:32 +00:00
wdenk
412babe304
It's better to handle LZO and LZARI compression mdoes for JFFS2 with
...
a single #define.
2005-05-05 09:51:44 +00:00
wdenk
60fc6cbbb7
Increase CFG_MONITOR_LEN for Rattler board to match actual code size.
2005-05-05 09:13:21 +00:00
wdenk
07cc099941
Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of
...
March 13, 2005); new configuration options CONFIG_JFFS2_LZO and
CONFIG_JFFS2_LZARI are added. Both are undefined by default.
2005-05-05 00:04:14 +00:00
wdenk
cf8bc5773c
Fix problem with symbolic links in JFFS2 code.
2005-05-04 23:50:54 +00:00
wdenk
a710d4be80
Use linker ASSERT statement to prevent undetected overlapping of
...
sections on PPChameleon board; other boards might use this, too.
2005-05-04 23:44:59 +00:00
wdenk
90dc67049d
README: add explanation about patch policy
...
net/net.c: fix indentation
2005-05-03 14:12:25 +00:00
stroese
434cf850a4
* Patch by Stefan Roese, 03 May 2005:
...
Update for P3G4
Fix problems in cmd_universe.c
* Patch by Matthias Fuchs, 03 May 2005:
Added missing variable declaration in cmd_nand.c
Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram
2005-05-03 06:19:57 +00:00
stroese
81b83c9ecc
* Patch by Matthias Fuchs, 03 May 2005:
...
Added missing variable declaration in cmd_nand.c
Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram
2005-05-03 06:12:20 +00:00
stroese
dcb2f95a60
* Patch by Stefan Roese, 03 May 2005:
...
Update for P3G4
Fix problems in cmd_universe.c
2005-05-03 06:06:41 +00:00
wdenk
9f709b6cee
Fix INKA4x0: use CS1 as gpio_wkup_6 output
2005-04-22 15:09:09 +00:00
wdenk
a63109281a
Fix bug in the SDRAM initialization code for canmb, IceCube and
...
PM520 boards.
Fix PHY address for canmb board.
2005-04-21 21:10:22 +00:00
wdenk
7cc1438d43
get rid of obsolete CFG_AT91C_BRGR_DIVISOR definition
2005-04-20 14:38:59 +00:00
wdenk
ec0ca73190
Cleanup serial console baudrate calculation on AT91RM9200
2005-04-20 12:36:05 +00:00
wdenk
b2323ea6f9
Auto-size RAM on canmb board.
...
Cleanup.
2005-04-20 09:28:54 +00:00
stroese
fddae7b811
* Patch by Matthias Fuchs, 18 Apr 2005:
...
Make PCI target address spaces on PMC405 and CPCI405 boards
configurable via environment variables
2005-04-20 06:52:40 +00:00
wdenk
5e5f9ed254
Add support for canmb board
2005-04-13 23:15:10 +00:00
stroese
4c2a366db3
* Patch by Stefan Roese, 13 Apr 2005:
...
Update for esd apc405
2005-04-13 10:08:39 +00:00