Commit Graph

164 Commits

Author SHA1 Message Date
Jean-Christophe PLAGNIOL-VILLARD
0176c03a24 nomadik/nand: fix 'ecc512' discards qualifiers from pointer target type
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-02-22 17:56:50 +01:00
Alessandro Rubini
0d8c6eab24 Nand driver for Nomadik SoC
This driver implements the ECC algorithm described in
the CPU data sheet and uses the OOB layout chosen in
already-released development systems (shipped with a custom-made
u-boot 1.3.1).

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stnwireless.com>
2009-02-22 13:40:28 +01:00
Heiko Schocher
4f975678de cfi: make flash_get_info() non static
If on your board is more than one flash, you must know
the size of every single flash, for example, for updating
the DTS before booting Linux. So make this function
flash_get_info() extern, and you can have all info
about your flashes.

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-02-11 17:01:17 +01:00
Wolfgang Denk
f8306cb94f Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/master 2009-02-07 23:51:52 +01:00
Wolfgang Denk
64ace0d1e5 Merge branch 'master' of git://git.denx.de/u-boot-nand-flash 2009-02-07 23:37:10 +01:00
Peter Tyser
8da601280a NAND: Add timeout for reset command
Without the timeout present an infinite loop can occur if the
NAND device is broken or not present.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-02-06 17:29:38 -06:00
Peter Tyser
10dc6a9bef NAND: Silence warning when CONFIG_SYS_NAND_QUIET_TEST
Commit cfa460adfd removed support
for disabling the "No NAND device found!!!" warning when
CONFIG_SYS_NAND_QUIET_TEST was defined.  This re-adds support
for silencing the warning.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-02-06 17:29:29 -06:00
Valeriy Glushkov
ad09ab2e3a NAND: Fixed invalid pointers to static relocated chip names
Dear Wolfgang,

You are right, the patch was ugly.
The new one seems to be better.

Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-02-06 17:28:31 -06:00
Stefan Roese
e1fb6d0d52 cfi_flash: Fix typo in cfi_flash.c
Patch "flash/cfi_flash: Use virtual sector start address, not phys"
introduced a small typo and compilation warning for systems with CFI
legacy support (e.g. hcu4). This patch fixes it.

Signed-off-by: Stefan Roese <sr@denx.de>
2009-02-05 11:44:52 +01:00
Stefan Roese
28745db969 jedec_flash: Only use manufacturer defines from common flash.h
This patch removes the double defined manufacturer defines from
jedec_flash.c. Since the common defines in flash.h are 32bit
we now need the (16) cast. This patch also removes the compilation
warning (e.g. seen on hcu5):

./MAKEALL hcu5
Configuring for hcu5 board...
jedec_flash.c:219: warning: large integer implicitly truncated to unsigned type

Signed-off-by: Stefan Roese <sr@denx.de>
2009-02-05 11:27:58 +01:00
Stefan Roese
ec21d5cfcb cfi_flash: Silence compilation warning
Patch "flash/cfi_flash: Use virtual sector start address, not phys"
introduced a small compilation warning. This patch fixes it.

Signed-off-by: Stefan Roese <sr@denx.de>
2009-02-05 11:25:57 +01:00
Becky Bruce
09ce9921a7 flash/cfi_flash: Use virtual sector start address, not phys
include/flash.h was commented to say that the address in
flash_info->start was a physical address.  However, from u-boot's
point of view, and looking at most flash code, it makes more
sense for this to be a virtual address.  So I corrected the
comment to indicate that this was a virtual address.

The only flash driver that was actually treating the address
as physical was the mtd/cfi_flash driver.  However, this code
was using it inconsistently as it actually directly dereferenced
the "start" element, while it used map_physmem to get a
virtual address in other places.  I changed this driver so
that the code which initializes the info->start field calls
map_physmem to get a virtual address, eliminating the need for
further map_physmem calls.  The code is now consistent.

The *only* place a physical address should be used is when defining the
flash banks list that is used to initialize the flash_info struct,
usually found in the board config file.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-02-05 11:20:05 +01:00
Wolfgang Denk
657f2062d8 Fix compiler warning
(shows up only when DEBUG is enabled)

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-02-04 12:09:20 +01:00
Mike Frysinger
be9d8c780e Blackfin: add driver for on-chip NAND controller
This is a port of the Linux Blackfin on-chip NFC driver to U-Boot.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-02-02 12:27:07 -05:00
Wolfgang Denk
6c6e042ab3 Merge branch 'master' of git://git.denx.de/u-boot-arm 2009-02-01 21:38:07 +01:00
Richard Retanubun
e8eac43718 CFI: Add geometry reversal for STMicro M29W320ET
Added flash_fixup_stm to fix geometry reversal on STMicro M29W320ET flash chip.

Modeled after flash_fixup_amd, this patch handles the geometry reversal
or erase sectors that exist for ST Micro (now Numonyx) M29W320ET flash.
Since I cannot test all STM's chips, the detection is implemented as
narrow as possible for now.

Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-01-26 10:59:48 +01:00
Jens Gehrlein
0f8e851e89 CFI: increase performance of function find_sector()
Tested on TQM5200S-BD with Samsung K8P2815UQB

Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-01-26 10:50:13 +01:00
Jens Gehrlein
a7292871a7 CFI: avoid redundant function call in single word programming mode
The function find_sector() doesn't need to be called twice in
the case of AMD command set.
Tested on TQM5200S-BD with Samsung K8P2815UQB.

Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-01-26 10:49:59 +01:00
Dirk Behme
12201a1354 OMAP3: Add NAND support
Add NAND support.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Syed Mohammed Khasim <khasim@ti.com>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
2009-01-24 17:51:21 +01:00
Brad Bozarth
68f8718df2 spi flash: fix crash due to spi flash miscommunication
Higher spi flash layers expect to be given back a pointer that was
malloced so that it can free the result, but the lower layers return
a pointer that is in the middle of the malloced memory. Reorder the
members of the lower spi structures so that things work out.

Signed-off-by: Brad Bozarth <bflinux@yumbrad.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-01-24 01:57:40 +01:00
Niklaus Giger
94f9279f7b Added legacy flash ST Micro M29W040B 2009-01-24 01:22:22 +01:00
Mike Frysinger
d4bade8d77 nand: fixup printf modifiers to match types used
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-01-23 10:32:52 -06:00
Wolfgang Grandegger
6c869637fe NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS
This patch renames NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS and
changes the default from 8 to 1 for the legacy and the new MTD
NAND layer. This allows to remove all NAND_MAX_CHIPS definitions
in the board config files because none of the boards use multi
chip support (NAND_MAX_CHIPS > 1) so far. The bamboo and the DU440
define

 #define NAND_MAX_CHIPS          CONFIG_SYS_MAX_NAND_DEVICE

but that's bogus and did not work anyhow.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-01-23 10:32:51 -06:00
Nishanth Menon
50657c2732 NAND: Enable nand lock, unlock feature
Enable nand lock, unlock and status of lock feature.
Not every device and platform requires this, hence,
it is under define for CONFIG_CMD_NAND_LOCK_UNLOCK

Nand unlock and status operate on block boundary instead
of page boundary. Details in:
http://www.micron.com/products/partdetail?part=MT29C2G24MAKLAJG-6%20IT

Intial solution provided by Vikram Pandita <vikram.pandita@ti.com>
Includes preliminary suggestions from Scott Wood

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-01-23 10:32:49 -06:00
Mike Frysinger
69fb8be4fc NAND: move board_nand_init to nand.h
Rather than putting the function prototype for board_nand_init() in the one
place where it gets called, put it into nand.h so that every place that also
defines it gets the prototype.  Otherwise, errors can go silently unnoticed
such as using the wrong return value (void rather than int) when defining
the function.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-01-23 10:32:49 -06:00
Stefan Roese
1ae3986204 OneNAND: Additional sync with 2.6.27
- Add subpage write support
- Add onenand_oob_64/32 ecclayout

This has been missing and without it UBI has some incompatibilies issues
with the current (>= 2.6.27) Linux kernel version. vid_hdr_offset is
placed differently (2048 instead of 512) without this fix.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-01-23 10:32:48 -06:00
Kyungmin Park
1714f51a20 Add markbad function
Add missing markbad function
If not, it's hang when it entered the mtd->mark_bad().

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2009-01-23 10:32:47 -06:00
Stefan Roese
8cf11f3aa7 OneNAND: Save version_id in onenand_chip struct
The version (ver_id) was not stored in the onenand_chip structure and
because of this the continuous locking scheme could be enabled on some
chips.

Signed-off-by: Stefan Roese <sr@denx.de>
2009-01-23 10:32:46 -06:00
Stefan Roese
4fca3310d6 OneNAND: Fix compiler warnings
Signed-off-by: Stefan Roese <sr@denx.de>
2009-01-23 10:32:45 -06:00
Kyungmin Park
ef0921d6b0 Sync with 2.6.27
Sync with OneNAND kernel codes

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2009-01-23 10:32:44 -06:00
Wolfgang Denk
f85cd46918 Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx 2008-12-30 23:30:47 +01:00
Kumar Gala
9d94aff699 NAND FSL elbc: Use virt_to_phys to determine which bank is in use
The current code that determines which bank/chipselect is used for a
given NAND instance only worked for 32-bit addresses and assumed
a 1:1 mapping.  This breaks in 36-bit physical configs.

The proper way to handle this is to use the virt_to_phys() and
BR_PHYS_ADDR() routinues to match the 34-bit lbc bus address
with the the virtual address the NAND code uses.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Scott Wood <scottwood@freescale.com>
2008-12-19 18:20:08 -06:00
Scott Wood
ff49ea8977 NAND: Mark the BBT as scanned prior to calling scan_bbt.
Otherwise, recursion can occur if scan_bbt does not find a bad block
table, and tries to write one, and the attempt to erase the BBT area
causes a bad block check.

Signed-off-by: Scott Wood <scottwood@freescale.com>
2008-12-16 14:40:34 -06:00
Wolfgang Denk
455ae7e87f Coding style cleanup, update CHANGELOG.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-12-16 01:02:17 +01:00
Mike Frysinger
84bc72d90c spi/stmicro: fix debug() display of cmd
The stmicro_wait_ready() func tries to show the actual opcode that was sent
to the device, but instead it displays the array pointer.  Fix it to pull
out the opcode from the start of the array.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-12-16 00:48:18 +01:00
Stefan Roese
8173293516 UBI: Return -ENOMEM upon failing malloc
Return with correct error code (-ENOMEM) from ubi_attach_mtd_dev() upon
failing malloc().

Signed-off-by: Stefan Roese <sr@denx.de>
2008-12-10 12:55:23 +01:00
Stefan Roese
2ee951ba2a UBI: Enable re-initializing of the "ubi part" command
With this patch now, the user can call "ubi part" multiple times to
re-connect the UBI device to another MTD partition.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-12-09 10:07:36 +01:00
Stefan Roese
9def12cae3 MTD: Fix problem based on non-working relocation (list head mtd_partitions)
Don't use LIST_HEAD() but initialize the struct via INIT_LIST_HEAD() upon
first call of add_mtd_partitions(). Otherwise this won't work on platforms
where the relocation is broken (like MIPS or PPC).

Signed-off-by: Stefan Roese <sr@denx.de>
2008-12-09 10:07:23 +01:00
Ilko Iliev
bd876772ee mtd/dataflash.c: fix a problem with the last partition
This patch fix the problem that only the [NB_DATAFLASH_AREA - 1] dataflash
partition can be defined to use the area to the end of dataflash size.
Now it is possible to have only one dataflash partition from 0 to the end
of of dataflash size.

Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2008-12-02 21:53:24 +01:00
Ilko Iliev
03f797793b fix some coding style violations.
This patch fix some coding style violations.

Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2008-12-02 21:53:22 +01:00
Scott Wood
2077e348c2 NAND: Fix misplaced return statement in nand_{read,write}_skip_bad().
This caused the operation to be needlessly repeated if there were
no bad blocks and no errors.

Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2008-11-25 10:47:02 -06:00
Wolfgang Denk
f9b354faa0 Merge branch 'master' of git://git.denx.de/u-boot-ubi 2008-11-25 11:40:57 +01:00
Piotr Ziecik
e6a7edbc17 mtd: Remove a printf() from add_mtd_device().
Remove a printf() from add_mtd_device(), which produces spurious output.

Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-11-24 11:29:53 +01:00
Piotr Ziecik
91809ed51d cfi-mtd: Add cfi-mtd driver.
Add cfi-mtd driver, which exports CFI flash to MTD layer.
This allows CFI flash devices to be used from MTD layer.

Building of the new driver is controlled by CONFIG_FLASH_CFI_MTD
option. Initialization is done by calling cfi_mtd_init() from
flash_init().

Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-11-24 11:05:25 +01:00
Piotr Ziecik
6ea808efdf cfi_flash: Add interface for flash verbosity control
Add interface for flash verbosity control. It allows
to disable output from low-level flash API. It is useful
when calling these low-level functions from context other
than flash commands (for example the MTD/CFI interface
implmentation).

Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-11-24 10:55:36 +01:00
Piotr Ziecik
ebc9784ce6 cfi_flash: Export flash_sector_size() function.
Export flash_sector_size() function from drivers/mtd/cfi_flash.c,
so that it can be used in the upcoming cfi-mtd driver.

Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-11-24 10:55:35 +01:00
Stefan Roese
45aa5a7f4d cfi_flash: Make all flash access functions weak
This patch defines all flash access functions as weak so that
they can be overridden by board specific versions.

This will be used by the upcoming VCTH board support where the NOR
FLASH unfortunately can't be accessed memory-mapped. Special
accessor functions are needed here.

To enable this weak functions you need to define
CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS in your board config header.
Otherwise the "old" default functions will be used resulting
in smaller code.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-11-24 10:55:35 +01:00
Kyungmin Park
c91a719daa UBI: Add basic UBI support to U-Boot (Part 5/8)
This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
It's based on the Linux UBI version and basically has a "OS"
translation wrapper that defines most Linux specific calls
(spin_lock() etc.) into no-ops. Some source code parts have been
uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
this version with the Linux version and simplifies future UBI
ports/bug-fixes from the Linux version.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-11-19 20:34:39 +01:00
Kyungmin Park
f412fefa07 UBI: Add basic UBI support to U-Boot (Part 4/8)
This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
It's based on the Linux UBI version and basically has a "OS"
translation wrapper that defines most Linux specific calls
(spin_lock() etc.) into no-ops. Some source code parts have been
uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
this version with the Linux version and simplifies future UBI
ports/bug-fixes from the Linux version.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-11-19 20:34:39 +01:00
Kyungmin Park
2d262c4853 UBI: Add basic UBI support to U-Boot (Part 3/8)
This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
It's based on the Linux UBI version and basically has a "OS"
translation wrapper that defines most Linux specific calls
(spin_lock() etc.) into no-ops. Some source code parts have been
uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
this version with the Linux version and simplifies future UBI
ports/bug-fixes from the Linux version.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-11-19 20:34:39 +01:00