Commit Graph

20235 Commits

Author SHA1 Message Date
York Sun
054dfd9b9d powerpc/t4240qds: Update DDR timing table
Update the timing table to support more rank density, based on the theory
that similar density DIMMs have similar clock adjust and write level start
timing. Update the timing for 1600 and 1866 MT/s. Tested with Micron
MT18JSF1G72AZ-1G9E1 DIMMs, iDIMM M3CN-4GMJ3C0C-M92.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-14 16:00:27 -05:00
Roy Zang
f9772444a0 T4/SerDes: correct the SATA index
Lane H on SerDes4 should be SATA2 instead of SATA1

Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-14 16:00:26 -05:00
Shaohui Xie
944b6ccf1b Fman/t4240: some fix for 10G XAUI
1. fix 10G mac offset by plus 8;
2. add second 10G port info for FM1 & FM2 when init ethernet info;
3. fix 10G lanes name to match lane protocol table;

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-14 16:00:26 -05:00
Shaohui Xie
4e5c9261be powerpc/t4240qds: fix XAUI card PHY address
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-14 16:00:25 -05:00
Roy Zang
9458f6d83a T4/serdes: fix the serdes clock frequency
Reverse the bit sequence to set and display serdes clock frequency
correctly. The correct bit maps in BRDCFG2 are
0	1	2	3	4	5	6	7
S1RATE[1:0]	S2RATE[1:0] 	S3RATE[1:0] 	S4RATE[1:0]

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-14 16:00:25 -05:00
Andy Fleming
3e4c3137d6 e6500: Move L1 enablement after L2 enablement
The L1 D-cache on e6500 is write-through. This means that it's not
considered a good idea to have the L1 up and running if the L2 is
disabled. We don't actually *use* the L1 until after the L2 is
brought up on e6500, so go ahead and move the L1 enablement after
that code is done.

Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-14 16:00:25 -05:00
Shaohui Xie
7ff8c7ce35 powerpc/t4240qds: Fix SPI flash type
T4240QDS uses a SST instead of SPANSION SPI flash.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-14 16:00:25 -05:00
York Sun
45c18853d8 powerpc/mpc85xx: Update corenet global utility block registers
Fix ccsr_gur for corenet platform. Remove non-exist registers. Add fuse
status register.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-14 16:00:24 -05:00
Andy Fleming
cd7ad62996 powerpc/mpc85xx: Add definitions for HDBCR registers
Makes it a bit easier to see if we've properly set them. While
we're in there, modify the accesses to HDBCR0 and HDBCR1  to actually
use those definitions.

Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-14 16:00:24 -05:00
Sandeep Singh
0cb3325cd3 powerpc/B4860: Corrected FMAN1 operating frequency print at u-boot
The bit positions for FMAN1 freq in RCW is different for B4860.
Also addded a case when FMAN1 frewuency is equal to systembus.

Signed-off-by: Sandeep Singh <Sandeep@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-14 16:00:24 -05:00
Tom Rini
a661b99dbc Merge branch 'master' of git://git.denx.de/u-boot-x86 2013-05-13 18:17:39 -04:00
Simon Glass
8f0278eab4 x86: Add coreboot timestamps
Add selected coreboot timestamps into bootstage to get a unified view of
the boot timings.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-13 13:33:22 -07:00
Simon Glass
5397d8058c x86: Support adding coreboot timestanps to bootstage
Coreboot provides a lot of useful timing information. Provide a facility
to add this to bootstage on start-up.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-13 13:33:22 -07:00
Simon Glass
04dbf77d62 x86: config: Enable LZO for coreboot, remove zlib, gzip
We don't use zlib and gzip but do use lzo, so enable this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-13 13:33:22 -07:00
Simon Glass
a92181b399 x86: Fix warning in cmd_ximg.c when CONFIG_GZIP is not defined
This local variable is not used unless CONFIG_GZIP is defined. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-13 13:33:22 -07:00
Simon Glass
fb7db41cd4 bootstage: Allow marking a particular line of code
Add a function which allows a (file, function, line number) to be marked
in bootstage.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Che-Liang Chiou <clchiou@chromium.org>
2013-05-13 13:33:22 -07:00
Simon Glass
2e65959be6 x86: Enable bootstage for coreboot
This is a convenient way of finding out where boottime is going. Enable
it for coreboot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-13 13:33:21 -07:00
Doug Anderson
158e7d059c Call bootstage_relocate() after malloc is initted
In a previous CL we added the bootstage_relocate(), which should be
called after malloc is initted.  Now we call it on generic board.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2013-05-13 13:33:21 -07:00
Doug Anderson
150678a582 bootstage: Copy bootstage strings post-relocation
Any pointers to name strings that were passed to bootstage_mark_name()
pre-relocation should be copied post-relocation so that they don't get
trashed as the original location of U-Boot is re-used for other
purposes.

This change introduces a new API call that should be called from
board_init_r() after malloc has been initted on any board that uses
bootstage.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2013-05-13 13:33:21 -07:00
Simon Glass
e802ee0f99 bootstage: Add stubs for new bootstage functions
Some functions don't have a stub for when CONFIG_BOOTSTAGE is not defined.
Add one to avoid #ifdefs in the code when this is used in U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Che-Liang Chiou <clchiou@chromium.org>
Reviewed-by: Tom Wai-Hong Tam <waihong@chromium.org>
2013-05-13 13:33:21 -07:00
Simon Glass
d0b6f247a1 x86: Re-enable PCAT timer 2 for beeping
While we don't want PCAT timers for timing, we want timer 2 so that we can
still make a beep. Re-purpose the PCAT driver for this, and enable it in
coreboot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-13 13:33:21 -07:00
Simon Glass
f9083bbe78 x86: Remove ISR timer
This is no longer used since we prefer the more accurate TSC timer, so
remove the dead code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Graeme Russ <graeme.russ@gmail.com>
2013-05-13 13:33:21 -07:00
Simon Glass
29756d4447 x86: Remove old broken timer implementation
Tidy up some old broken and unneeded implementations. These are not used
by coreboot or anything else now.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Reviewed-by: Michael Spang <spang@chromium.org>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Acked-by: Graeme Russ <graeme.russ@gmail.com>
2013-05-13 13:33:21 -07:00
Simon Glass
e761ecdbb8 x86: Add TSC timer
This timer runs at a rate that can be calculated, well over 100MHz. It is
ideal for accurate timing and does not need interrupt servicing.

Tidy up some old broken and unneeded implementations at the same time.

To provide a consistent view of boot time, we use the same time
base as coreboot. Use the base timestamp supplied by coreboot
as U-Boot's base time.

Signed-off-by: Simon Glass <sjg@chromium.org>base
Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-13 13:33:21 -07:00
Simon Glass
7949703a95 x86: Rationalise kernel booting logic and bootstage
The 'Starting linux' message appears twice in the code, but both call
through the same place. Unify these and add calls to bootstage to
mark the occasion.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Michael Spang <spang@chromium.org>
Acked-by: Graeme Russ <graeme.russ@gmail.com>
2013-05-13 13:33:20 -07:00
Simon Glass
c78a62acdf x86: Implement panic output for coreboot
panic_puts() can be called in early boot to display a message. It might
help with early debugging.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Wai-Hong Tam <waihong@chromium.org>
2013-05-13 13:33:20 -07:00
Simon Glass
7282d834cd x86: Declare global_data pointer when it is used
Several files use the global_data pointer without declaring it. This works
because the declaration is currently a NOP. But still it is better to
fix this so that x86 lines up with other archs.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-13 13:33:20 -07:00
Simon Glass
fa790fa0a9 x86: Remove legacy board init code
Since we use CONFIG_SYS_GENERIC_BOARD on x86, we don't need this anymore.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Graeme Russ <graeme.russ@gmail.com>
2013-05-13 13:33:20 -07:00
Simon Glass
20a8b41d50 x86: Remove unused portion of link script
Since we don't have real-mode code now, we can remove this chunk of the link
script.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Graeme Russ <graeme.russ@gmail.com>
2013-05-13 13:31:18 -07:00
Simon Glass
dfdedd9c2e x86: Remove unused bios/pci code
Graeme Russ pointed out that this code is no longer used. Remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Graeme Russ <graeme.russ@gmail.com>
2013-05-13 13:31:18 -07:00
Andreas Bießmann
a7e62be091 avr32: fix relocation address calculation
Commit 1865286466 (Introduce generic link
section.h symbol files) changed the __bss_end symbol type from char[] to
ulong. This led to wrong relocation parameters which ended up in a not working
u-boot. Unfortunately this is not clear to see cause due to RAM aliasing we
may get a 'half-working' u-boot then.

Fix this by dereferencing the __bss_end symbol where needed.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-05-13 10:35:12 +02:00
Gerald Van Baren
bbd0f7e3ba Move FDT_RAMDISK_OVERHEAD from fdt.h to libfdt_env.h
The define should not have been put in fdt.h originally, libfdt_env.h
is the proper place for target-specific customizations.

Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2013-05-10 19:04:50 -04:00
Justin Sobota
1258f14fd4 Added license header to dtc/libfdt/fdt.h and libfdt_env.h
This commit adds a license header to fdt.h and libfdt_env.h
because the license was omitted.

U-Boot note: the u-boot libfdt_env.h header portion was not applied to
the u-boot libfdt_env.h because that file was created by Gerald Van Baren
(with a license header). - gvb

Ref: DTC commit 27cdc1b1

Signed-off-by: Justin Sobota <jsobota@ti.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2013-05-10 19:04:50 -04:00
François Revol
c73bd49dee Fix typo
Ref: DTC commit cc11e522

Signed-off-by: François Revol <revol@free.fr>
2013-05-10 19:04:49 -04:00
Simon Glass
e853b32424 Export fdt_stringlist_contains()
This function is useful outside libfdt, so export it.

Ref: DTC commit b7aa300e

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
2013-05-10 19:04:49 -04:00
Tom Rini
2988eac70e Merge branch 'patman' of git://git.denx.de/u-boot-x86 2013-05-10 08:16:34 -04:00
Stefan Kristiansson
ecd7484b9b openrisc: move board linker script(s) to a common in cpu/
Unifies the openrisc boards linker scripts into a common one.

Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
2013-05-10 08:16:33 -04:00
Stefan Kristiansson
16c5e5b9c4 openrisc: specify a memory region for u_boot_lists
Since there are two memory areas defined, vectors and ram,
the linker will error when neither of them are specified for a
section.

Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
2013-05-10 08:16:33 -04:00
Egbert Eich
50ce4c07df fs/ext4: Support device block sizes != 512 bytes
The 512 byte block size was hard coded in the ext4 file systems.
Large harddisks today support bigger block sizes typically 4096
bytes.
This patch removes this limitation.

Signed-off-by: Egbert Eich <eich@suse.com>
2013-05-10 08:16:33 -04:00
Anatolij Gustschin
b1e6c4c3d4 Fix references to the documentation files
Many boot image configuration files refer to the
appropriate documentation file, but these references
contain typos in the directory and file name. Fix
them. Also fix reference to doc/README.SPL file.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
2013-05-10 08:16:33 -04:00
Michal Simek
e85707570c patman: Do not hardcode python path
Patman requires python 2.7.4 to run but it doesn't
need to be placed in /usr/bin/python.
Use env to ensure that the interpreter used is
the first one on environment's $PATH on system
with several versions of Python installed.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
2013-05-09 14:27:41 -07:00
Simon Glass
f0b739f15f buildman: Allow conflicting tags to avoid spurious errors
Conflicting tags can prevent buildman from building two series which exist
one after the other in a branch. There is no reason not to allow this sort
of workflow with buildman, so ignore conflicting tags in buildman.

Change-Id: I2231d04d8684fe0f8fe77f8ea107e5899a3da5e8
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@ti.com>
2013-05-09 14:27:38 -07:00
Lucian Cojocar
e4fdcadd8a env: throw an error when an empty key is used
If the environment contains an entry like "=value" "\0" we should throw
an error when parsing the environment. Otherwise, U-Boot will enter in
an infinite loop.

Signed-off-by: Lucian Cojocar <cojocar@gmail.com>
2013-05-09 17:03:05 -04:00
Marek Vasut
d642c467a0 build: Pull -DBUILD_TAG into separate ifdef
Currently the base setting for CFLAGS is split in two possibilities,
one with -DBUILD_TAG appended at the end and one without, the rest of
CFLAGS is the same in both cases. Change this so CFLAGS are always set
and the -DBUILD_TAG is appended in separate ifdef.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Tom Rini <trini@ti.com>
Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
2013-05-09 17:03:04 -04:00
Michal Simek
4e779ad2e5 gpio: Add support for microblaze xilinx GPIO
Microblaze uses gpio which is connected to the system reset.
Currently gpio subsystem wasn't used for it.

Add gpio driver and change Microblaze reset logic to be done
via gpio subsystem.

There are various configurations which Microblaze can have
that's why gpio_alloc/gpio_alloc_dual(for dual channel)
function has been introduced and gpio can be allocated
dynamically.

Adding several gpios IP is also possible and supported.

For listing gpio configuration please use "gpio status" command

This patch also remove one compilation warning:
microblaze-generic.c: In function 'do_reset':
microblaze-generic.c:38:47: warning: operation on '*1073741824u'
 may be undefined [-Wsequence-point]

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-09 11:20:08 +02:00
Michal Simek
a8425d5288 microblaze: bootm: Add support for loading initrd
fdt_initrd add additional information to DTB about initrd
addresses which are later used by kernel.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-09 11:13:44 +02:00
Michal Simek
1e71fa4369 microblaze: bootm: Fix coding style issues
Prepare place for new patch.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-09 11:11:57 +02:00
Kuan-Yu Kuo
fe8e4dbad1 nds32: Use sections header to obtain link symbols
Include this header to get access to link symbols, which are otherwise
removed.

Signed-off-by: Kuan-Yu Kuo <ken.kuoky@gmail.com>
Cc: Macpaul Lin <macpaul@gmail.com>
2013-05-08 12:38:10 +08:00
Tom Rini
7e7501f4bb Merge branch 'master' of git://www.denx.de/git/u-boot-mmc 2013-05-07 10:09:00 -04:00
Fabio Estevam
88227a1d8a mmc: fsl_esdhc: Use calloc()
A malloc() followed by memset() can be simply replaced by calloc().

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-06 16:26:25 -05:00