Commit Graph

69763 Commits

Author SHA1 Message Date
Eugen Hristev
05176cd08f configs: sama7g5ek: add i2c and eeprom
Add drivers for flexcom, i2c and eeproms

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-07 09:44:16 +02:00
Eugen Hristev
a07d2a1121 board: atmel: sama7g5ek: add support for MAC address retreival
Obtain two MAC addresses from the two EEPROMs and configure the two
available Ethernet interfaces accordingly.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-07 09:44:16 +02:00
Eugen Hristev
9b614c87bb ARM: dts: sama7g5ek: add i2c1 bus and eeproms
Add node for flx1 i2c1 subnode (and alias to bus 0)
This bus has two eeprom devices connected.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-07 09:44:16 +02:00
Eugen Hristev
1c629fd033 ARM: dts: at91: sama7g5: add flexcom1 and i2c subnode
Add flexcom1 and i2c subnode.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-07 09:44:16 +02:00
Eugen Hristev
0f8904b82d configs: sama7g5: add mmc config for sdmmc0
Add new config for storing environment from sdmmc0.
Also clean-up sama7g5ek_emmc1 to point to the proper mmc device.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-07 09:44:16 +02:00
Eugen Hristev
d05223eb5a board: atmel: sama7g5ek: clean-up header bootcommand
Clean-up boot command to use the predefined device and part for FAT
environment.
According to this device and partition, select the proper boot media.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-07 09:44:16 +02:00
Eugen Hristev
7f4c89cc5c ARM: dts: at91: sama7g5ek: enable sdmmc0 with pinctrl
Enable sdmmc0 on this board. A non-removable eMMC is connected on this
block.
Configure pincontrol accordingly.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-07 09:44:16 +02:00
Eugen Hristev
523c10c1fd ARM: dts: at91: sama7g5: add node for sdmmc0
Add node for sdmmc0 block.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-07 09:44:16 +02:00
Eugen Hristev
9b6f157e19 ARM: dts: at91: sama7g5: add assigned clocks for sdmmc1
SDMMC1 requires clock specification with assigned-clocks, such that
the PMC will know which parent to assign and the initial start-up frequency.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-07 09:44:16 +02:00
Claudiu Beznea
b17a268a8c configs: sama7g5ek: enable CCF
Enable CCF for SAMA7G5.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:16 +02:00
Claudiu Beznea
a5077825c3 configs: sama7g5ek: enable support for KSZ9131
Enable support for KSZ9131.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Claudiu Beznea
6b2bcfcad3 board: atmel: sama7g5ek: increase arp timeout and retry count
Increase ARP timeout and retry count as this will increase
the speed of communication.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Claudiu Beznea
3e5853e6a1 ARM: dts: sama7g5: add GMAC1
Add GMAC1.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Claudiu Beznea
e95af87e9b ARM: dts: sama7g5: add GMAC0
Add GMAC0.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Claudiu Beznea
02dae80ee4 configs: sama7g5ek: enable mii command
Enable mii command as ethernet's PHY specific programming is
based on it.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Eugen Hristev
7d41a8da84 ARM: dts: at91: sama7g5ek: add pinctrl for sdmmc1 and flx3
Add pinctrl for sdmmc1 and flx3.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-07 09:44:15 +02:00
Eugen Hristev
47a13af586 ARM: dts: at91: sama7g5: add pinctrl node
Add pioA pinctrl node.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-07 09:44:15 +02:00
Claudiu Beznea
b032230f87 ARM: dts: sama7g5: add pit64b support
Add DT bindings for PIT64B driver.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Claudiu Beznea
2efb34314d ARM: dts: sama7g5: enable autoboot
Enable autoboot.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Claudiu Beznea
dd2cf752d1 configs: sama7g5: use PIT64B
Use PIT64B driver. ATMEL_PIT is not available for SAMA7G5.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Claudiu Beznea
13f986b748 ARM: dts: sama7g5: add CPU bindings
Add CPU DT bindings.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Claudiu Beznea
2942a2f9d5 configs: sama7g5: enable CONFIG_CPU
Enable CONFIG_CPU.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Claudiu Beznea
394f520709 ARM: dts: sama7g5: switch to PMC bindings
Get rid of software defined MCK and switch to PMC bindings
for IPs currently present in device tree.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Claudiu Beznea
33fa0b6cef ARM: dts: sama7g5: add PMC bindings
Add DT bindings for PMC driver.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Claudiu Beznea
09f19f7770 ARM: dts: sama7g5: add slow clock bindings
Add DT bindings for slow clock driver.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Claudiu Beznea
072c975940 ARM: dts: sama7g5: add u-boot,dm-pre-reloc bindings for xtals
Add dm-pre-reloc DT binding property for cristals.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Claudiu Beznea
5e19ade9e5 ARM: dts: sama7g5: add slow rc and main rc oscillators
Add slow rc and main rc oscillators to dtsi.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Claudiu Beznea
3b86096a59 ARM: dts: sama7g5: move clock frequencies for xtals in board file
Move clock frequencies for crystals on board specific files.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Claudiu Beznea
3a2be103b0 configs: sama7g5ek: enable pll driver
Enable PLL driver for SAMA7G5.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Claudiu Beznea
86eeab7d89 configs: sama7g5ek: set malloc pool to 68K
Set malloc pool to 68K for sama7g5ek.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Claudiu Beznea
ac3740c9f2 board: atmel: sama7g5ek: add SYS_MALLOC_F_LEN to SYS_INIT_SP_ADDR
Heap base address is computed based on SYS_INIT_SP_ADDR by
subtracting the SYS_MALLOC_F_LEN value in
board_init_f_init_reserve().

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Eugen Hristev
1d463d6735 board: atmel: sama7g5ek: add initial support for sama7g5ek
Add initial support for sama7g5 evaluation kit board.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-07 09:44:15 +02:00
Eugen Hristev
626879b794 ARM: dts: sama7g5: add initial DT for sama7g5 SoC
Add initial basic devicetree for sama7g5 SoC

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-07 09:44:15 +02:00
Nicolas Ferre
2bc7e12e01 arm: at91: configs: Enable CONFIG_SYS_NAND_USE_FLASH_BBT on all boards
As highlighted by Stefan in the commit e074d0f79b ("arm: at91:
gardena-smart-gateway-at91sam: Enable CONFIG_SYS_NAND_USE_FLASH_BBT")
it's important to use BBT when Linux enables it. We use it for a long
time on all our boards.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Tom Rini <trini@konsulko.com>
Acked-by: Alexander Dahl <ada@thorsis.com>
2021-01-07 09:43:51 +02:00
Tom Rini
c15f44acf9 Prepare v2021.01-rc4
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-12-21 15:03:24 -05:00
Tom Rini
1e5f7df934 Travis-CI: Drop support
Travis-CI is changing their support for FOSS (understandably) to have a
limited per-month number of build minutes.  Unfortunately for us, the
matrix of jobs we run will exhaust that very quickly.  Remove the yml
file.  Thanks for all the builds, Travis-CI!

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-12-21 15:02:49 -05:00
Michael Walle
e668bec96a board: kontron: sl28: reorder mmc devices
Since linux commit 2e6cde96873253fd9eb0f20afd8ffd18278cff75 ("arm64:
dts: ls1028a: make the eMMC and SD card controllers use fixed indices")
mmc0 is the eMMC and mmc1 is the SD card. Also swap it in u-boot to
avoid any confusion by the user and to be aligned with linux.

Signed-off-by: Michael Walle <michael@walle.cc>
2020-12-20 16:53:25 -05:00
Tom Rini
46a4d75203 Pull request for UEFI sub-system for efi-2021-01-rc4
* Provide a tool to create a file with UEFI variables to preseed UEFI
   variable store.
 * Make size of UEFI variable store configurable.
 * Add man pages for commands 'bootefi' and 'button'.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl/ffokACgkQxIHbvCwF
 GsRn6Q/+P/7dmaqvatjar+2WxZN3WU1irQnp+p7fo2+QmijkjLvvRcnpjxAk2DTT
 a6xAh/RCRcKQt9nDw1thxJ7v0jUJ5US1sNa2SyrwrDfhQvYxuliflJJlsihV6sg+
 GOBOh0cwePEGRbHg6cm4klLc6jM8m/K4PYR7g+cRnqhSlOp6KE2IEgzUKExN7rp5
 OJJI/jJ3WslF16n37//4+XULAC71PHPhxF0Nj09fMJIsNjuG5F1dLQ3yXGuFse64
 d8/WFQEp3/9JPqfvDJtkJttRyNEDLDnRwzpzfpnJtaQi4fHcHDUO3FVcyscWhZh2
 Hs1ULebd/b8pBYllPv/YSfnteNqaGMviALEW46Bx9ZYc9DQKT9f332JsDoIhsxwA
 +keROkT8IqopFpzVvlCp5Ox+eYiDffy9y+t4RP3eP/V8CFtHhJ3DeWrbiG7X75h4
 2BOH6cdBTeepG79qd7MoxLYOA+931DJ1gl6ZL/AfBOtz4vs2Ne0jlUYkKjSHvthV
 jrhBcyQJcUo2U2RnXxNaSkfN66xOpSw+n6PoVCW0yq/xnJmqz746F+t3xacL9uj6
 HpPziHI1SWLrAWc1JRB/LkWYrN0wGJIcAEoDG21fJ36GBVPqTCObAIOllf9l0+oY
 LUbEev12dj3HUockYfn4AqU4tdiUoQSnf6NJwV72n5gFQxez8GQ=
 =2GYO
 -----END PGP SIGNATURE-----

Merge tag 'efi-2021-01-rc4' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for efi-2021-01-rc4

* Provide a tool to create a file with UEFI variables to preseed UEFI
  variable store.
* Make size of UEFI variable store configurable.
* Add man pages for commands 'bootefi' and 'button'.
2020-12-20 14:55:59 -05:00
Heinrich Schuchardt
77504ee676 MAINTAINERS: add tools/efivar.py to EFI PAYLOAD
tools/efivar.py allows to prepare a file with UEFI variables to preseed
the UEFI variable store.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-12-20 17:40:06 +01:00
Paulo Alcantara
73253d7765 tools: add a simple script to generate EFI variables
This script generates EFI variables for U-Boot variable store format.

A few examples:

  - Generating secure boot keys

    $ openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=TEST_PK/ \
            -keyout PK.key -out PK.crt -nodes -days 365
    $ efisiglist -a -c PK.crt -o foo.esl
    $ tools/efivar.py set -i ubootefi.var -n db -d foo.esl -t file
    $ tools/efivar.py set -i ubootefi.var -n kek -d foo.esl -t file
    $ tools/efivar.py set -i ubootefi.var -n pk -d foo.esl -t file

  - Printing out variables

    $ tools/efivar.py set -i ubootefi.var -n var1 -d foo -t str
    $ tools/efivar.py set -i ubootefi.var -n var2 -d bar -t str
    $ tools/efivar.py print -i ubootefi.var
    var1:
        8be4df61-93ca-11d2-aa0d-00e098032b8c EFI_GLOBAL_VARIABLE_GUID
        NV|BS|RT, DataSize = 0x3
        0000000000: 66 6F 6F                                          foo
    var2:
        8be4df61-93ca-11d2-aa0d-00e098032b8c EFI_GLOBAL_VARIABLE_GUID
        NV|BS|RT, DataSize = 0x3
        0000000000: 62 61 72                                          bar

    - Removing variables

      $ tools/efivar.py del -i ubootefi.var -n var1
      $ tools/efivar.py set -i ubootefi.var -n var1 -a nv,bs -d foo -t str
      $ tools/efivar.py print -i ubootefi.var -n var1
      var1:
          8be4df61-93ca-11d2-aa0d-00e098032b8c EFI_GLOBAL_VARIABLE_GUID
          NV|BS, DataSize = 0x3
          0000000000: 66 6F 6F                                        foo
      $ tools/efivar.py del -i ubootefi.var -n var1
      err: attributes don't match
      $ tools/efivar.py del -i ubootefi.var -n var1 -a nv,bs
      $ tools/efivar.py print -i ubootefi.var -n var1
      err: variable not found

Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>

Correct examples in commit message.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-12-20 17:40:06 +01:00
Heinrich Schuchardt
265ce19485 efi_loader: make variable store size customizable
Currently the size of the buffer to keep UEFI variables in memory is fixed
at 16384 bytes. This size has proven to be too small for some use cases.

Make the size of the memory buffer for UEFI variables customizable.

Reported-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2020-12-20 17:40:06 +01:00
Heinrich Schuchardt
0c1b71cd07 doc: man-page for bootefi command
Provide a description of the bootefi command.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-12-20 17:40:06 +01:00
Heinrich Schuchardt
24ceb441c7 doc: button command
Provide a description of the 'button' command.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-12-20 17:40:06 +01:00
Tom Rini
549e7cb708 Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-spi 2020-12-18 13:06:02 -05:00
Tom Rini
233a4d47e7 - fix Odroid-C4 soft-reboot caused by bad setup of SDCard VDD regulator
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAl/c5CAACgkQd9zb2sjI
 SdHSBA//aTL0ZOnipnKpI3dUinInVK1c8fsCSFZCSK7Csl4XDIFFdAPdwZ2I1+XF
 vc67GEFyHlVcBdygemHXIJs3CzBfB9RQvVmXPaP1fPrpHnNwLvE6rRFvbpzeFu9I
 rg5DjXOjUbL2GI/js/0vvMo9HmbzQHBvw+bpT8aeuZrnd1+SQk8LgJF8Sx2yWLiZ
 w9hVpoEtPtjlRaUhBBHMlLbSxA46T8B65sngHD1njxgYG7419vY5C3KSQhSwRHiK
 Qu39bZcEivCrpIR+3CMhmQ6JnLzBcmO8nneYqY1xb978sDG2524z5bMUWuZGcu2P
 VboFsEiOZD4NRjbEI7nFvI8na/eXjfN+YUYLbSnopBh0Hk1BXunZibV9064qEMWc
 V1tCFrDmZrTU5EXuwFDRKk868FhKZbLbxI6RSv2a2Au0ferWPwZvPHnx0capo+2I
 HmSj3jZkuGHAGQ3fA9GH7WGJASE51d6ckQUkRbrqHawvIFrlt3DHBy81Aa2BXdNb
 s77kb+UqWI2qdg+azcSnANAIkJ1MhBwFU+RqMz+C/0vxg7bJWMuPGLTVJ1AzYnj9
 +DEJR/KmFvO5X3tYyQqmq3bWThcuujtiosMabHMdV/m2ySMzP1BXJuCRE4XExnLO
 E7vCv+1hdTBR6/RoMFLApVKWIoBVRa7FJNigxtn2s36cYf1fjZQ=
 =75dR
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20201218' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- fix Odroid-C4 soft-reboot caused by bad setup of SDCard VDD regulator
2020-12-18 13:05:47 -05:00
Marek Szyprowski
21a1bc6a90 ARM: dts: meson: switch TFLASH_VDD_EN pin to open drain on Odroid-C4
For the proper reboot Odroid-C4 board requires to switch TFLASH_VDD_EN
pin to the high impedance mode, otherwise the board is stuck in the
middle of loading early stages of the bootloader from SD card.

This can be achieved by using the OPEN_DRAIN flag instead if the
ACTIVE_HIGH, what will leave the pin in input to achieve high state (pin
has the pull-up) and solve the issue.

Suggested-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-12-18 11:50:27 +01:00
Hongwei Zhang
936a645609 mtd: spi-nor-ids: add Micron MT25QL01G flash
Add Micron MT25QL01G flash, used on AST2600 board.

Signed-off-by: Hongwei Zhang <hongweiz@ami.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-12-18 16:19:33 +05:30
Pengpeng Chen
24f2794232 spi: ca_sflash: Add CAxxxx SPI Flash Controller
Add SPI Flash controller driver for Cortina Access
CAxxxx SoCs

Signed-off-by: Pengpeng Chen <pengpeng.chen@cortina-access.com>
Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
CC: Vignesh R <vigneshr@ti.com>
CC: Tom Rini <trini@konsulko.com>
[jagan: rebase on master]
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-12-18 16:16:37 +05:30
Sean Anderson
b55af5a225 riscv: Add device tree bindings for SPI
This patch adds bindings for the MMC slot and SPI flash on the Sipeed Maix
Bit.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Acked-by: Rick Chen <rick@andestech.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-12-18 16:16:37 +05:30
Sean Anderson
fec7bf0460 spi: dw: Add mem_ops
The designware ssi device has "broken" chip select behaviour [1], and needs
specific manipulation to use the built-in chip select. The existing fix is
to use an external GPIO for chip select, but typically the K210 has SPI3
directly connected to a flash chip with dedicated pins. This makes it
impossible to use the spi_xfer function to use spi, since the CS is
de-asserted in between calls.  This patch adds an implementation of
exec_op, which gives correct behaviour when reading/writing spi flash.

This patch also rearranges the headers to conform to U-Boot style.

[1] https://lkml.org/lkml/2015/12/23/132

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Tested-by Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-12-18 16:16:37 +05:30