Commit Graph

17958 Commits

Author SHA1 Message Date
Stephen Warren
01ca286526 tegra: enable CONFIG_CMD_PART
This is extremely likely to be used from the boot.scr that Tegra's default
bootcmd locates and executes.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-10-15 11:54:06 -07:00
Tom Warren
150c24936b Tegra20: Move some include files to arch-tegra for sharing with Tegra30
The move is pretty straight-forward. ap20.h and tegra20.h were renamed to ap.h and tegra.h.
Some files remain in arch-tegra20 but 'include' a file in 'arch-tegra' with #defines & structs
that will be common between T20 and T30 HW. HW-specific #defines, etc. stay in the 'arch-tegra20'
'root' file.

All boards build OK w/MAKEALL -s tegra20. Checkpatch.pl runs clean. Seaboard works OK.

Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-10-15 11:54:06 -07:00
Tom Warren
3064f32278 Tegra20: Move some code files to common directories for upcoming Tegra30 patches.
Move files that are going to be common between T20 and T30 into 'tegra-common'
subdirs in AVP (arm720t), CPU (armv7), and shared (arch/arm/cpu/.) areas. Any
files that are left behind in '/tegra20' will be copied to '/tegra30' subdirs
and modified for that SoC. The 'common' files should need only minor changes.

Include files (arch/arm/include/asm/arch-tegra/tegra20) will be done in a
follow-on patch.

Builds fine w/MAKEALL -s tegra20. Checkpatch.pl is clean.

Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-10-15 11:54:06 -07:00
Thierry Reding
66b796a560 tegra: Rename Medcom to Medcom-Wide
Medcom is the marketing name for an older, PXA-based version of the same
device. In order to avoid confusion, rename the Tegra-based version to
the new marketing name.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-10-15 11:54:06 -07:00
Thierry Reding
b9ce38ef29 tegra: Update Avionic Design vendor prefix
The official vendor prefix for Avionic Design is now "ad". Update the
board DTS files accordingly.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-10-15 11:54:06 -07:00
Joe Hershberger
1c4ea78aa7 tools: Add a README note about fw_printenv lock file
Add a mention of the lock file to the README for the fw_printenv tool.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reported-by: Luka Perkov <uboot@lukaperkov.net>
2012-10-15 11:54:05 -07:00
Joe Hershberger
586197dfe4 env: Check for NULL pointer in envmatch()
If the pointer passed into envmatch() is NULL, return -1 instead of
crashing.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-15 11:54:05 -07:00
Joe Hershberger
e4a223f04d tools/env: Serialize calls to fw_*env
Use a lock file at /var/lock/fw_printenv.lock.
Avoids seriously confusing the MTD driver.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-15 11:54:05 -07:00
Joe Hershberger
d9acae1a88 tools/env: Don't call env_init() in fw_getenv()
We will only call fw_getenv when the env has already been initialized.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-15 11:54:05 -07:00
Joe Hershberger
62a34a04e7 tools/env: Remove unneeded complexity
The length included the name length, and then it was subtracted back
out on each use.  Now we don't include it in the first place.  Also
realloc as we process arguments and eliminate memset.  Use memcpy
instead of manually copying each byte.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-15 11:54:05 -07:00
Joe Hershberger
497f2053f8 tools/env: Use a board-specific default env
Originally added in aa701b9433

Before this patch, there was a hard-coded env that was used as default
if the env in flash is detected as invalid.  Now this tool (compiled
for a given board) will share the default env with the u-boot for the
board.

Fix include of config.h

Need to define "TEXT_BASE" when building the fw_env tool so that the
default env will be correct for environments which use it.

Define __ASSEMBLY__ when calling #include <config.h> so that we only
get #defines (all we're interested in).

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-15 11:54:05 -07:00
Daniel Schwierzeck
47708457f8 common: cmd_bdinfo: fix type of value in print_lnum
This fixes a warning when compiling with ELDK-5.2.1 for MIPS64:

cmd_bdinfo.c: In function 'print_lnum':
cmd_bdinfo.c:56:2: warning: format '%llX' expects argument of type 'long long unsigned int', but argument 3 has type 'u64' [-Wformat]

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2012-10-15 11:54:04 -07:00
Simon Glass
14813f19e3 input: Add debugging for key matrix key codes
These are read from the fdt - add a debug feature to display the mapping
on start-up.

See that we get debug output listing the keycodes

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-10-15 11:54:04 -07:00
Simon Glass
71dc6bca4e input: Allow key ghosting filter to be disabled
Some keyboards will not need a key ghosting filter, so make this feature
optional.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-10-15 11:54:04 -07:00
Simon Glass
1b1d3e6461 input: Separate out keyboard repeat/delay from init
It is inconvenient to have to specify the keyboard repeat and delay at
init time if it is not yet available, so move this into a separate
function.

Some drivers will want to do this when their keyboard init routine
is actually called.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-10-15 11:54:04 -07:00
Simon Glass
00f1099e09 input: Correct key_matrix fdt decoding
Some issues with this were not addressed in the previous series. Fix up
the binding decoding to deal with what is actually expected in the fdt.

This corrects the broken keyboard on seaboard.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-10-15 11:54:04 -07:00
Fabio Estevam
92eee7cde1 tools: Add cleanpatch
There are some errors reported by checkpatch.pl that can be easily cleaned up by
using the cleanpatch tool.

Import the cleanpatch script from linux kernel 3.5.4 stable version as from the
following commit:

commit cb3ed5b7e09c6c0462e396d55e3fecc0980a333a
Author: H. Peter Anvin <hpa@zytor.com>
Date:   Fri May 25 17:58:26 2007 -0700

    scripts: Make cleanfile/cleanpatch warn about long lines

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-10-15 11:54:04 -07:00
Simon Glass
afb9bf55d0 patman: Handle checkpatch.pl not providing file/line info
Sometimes we don't get a valid filename or line number from checkpatch.pl,
for example if the patch is in a bad format. Deal with this by using a
default value, rather than a stack trace.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-10-15 11:54:04 -07:00
Simon Glass
ef0e9de82b patman: Support Series-name tag to name a series
Sometimes it is possible to forget the name of the branch you used to
generate an upstream series. To assist with this, add an optional
patman does not use this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-10-15 11:54:03 -07:00
Kim Phillips
33f336d528 MAKEALL: add a -C/--check option to enable build checking
thanks to Tom Rini for the good idea.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2012-10-15 11:54:03 -07:00
Kim Phillips
4ab64933e3 add check infrastructure, default sparse
Add support for running source code checkers on u-boot source, e.g.,
using sparse to aid with typechecking.  This comes in especially
handy as SoC vendors mix and match cores and devices with different
endianness, thus here we add CHECK_ENDIAN to the otherwise linux
kernel default CHECKFLAGS.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2012-10-15 11:54:03 -07:00
Pavel Herrmann
e46a4350b4 sata.h: Make all sata/ata drivers include <sata.h>
- block_dev_desc_t says that block_(read|write) take lbaint_t for blkcnt
  not ulong.
- We also move the extern of sata_dev_desc into <sata.h>
- Remove now duplicate declarations from driver-specific headers.

Signed-off-by: Tom Rini <trini@ti.com>
Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
2012-10-15 11:54:03 -07:00
Tom Rini
4ac8f8e022 ide.h: Make ide_(read|write) match block_dev_desc_t block_(read|write)
block_dev_desc_t says that block_(read|write) take lbaint_t for blkcnt
not ulong

Signed-off-by: Tom Rini <trini@ti.com>
2012-10-15 11:54:03 -07:00
Tom Rini
0e7d856ea5 sil_sata: Make sata_write() comply with <part.h>
sata_write() takes a const void as the last argument.  Fixing this means
we also need to make ata_low_level_rw_lba{28,48} also take a const void.

Signed-off-by: Tom Rini <trini@ti.com>
2012-10-15 11:54:03 -07:00
Tom Rini
98391ff143 sata_dwc: Make sata_write() use const void, per <part.h>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-15 11:54:02 -07:00
Tom Rini
974d801401 pata_bfin: Make sata_{read,write}() comply with <part.h>
These functions take lbaint_t for blkcnt.

Signed-off-by: Tom Rini <trini@ti.com>
2012-10-15 11:54:02 -07:00
Tom Rini
40c030f8ff fsl_sata: Make sata_{read,write}() comply with <part.h>
- sata_write() takes a const void as the last argument.  Fixing this
  means we also need to make ata_low_level_rw_lba{28,48} also take a
  const void.
- Both sata_{read,write} take lbaint_t for blkcnt and ulong for blknr

Signed-off-by: Tom Rini <trini@ti.com>
2012-10-15 11:54:02 -07:00
Tom Rini
dac8757100 dwc_ahsata: Make sata_write() comply with <part.h>
sata_write() takes a const void as the last argument.  Fixing this means
we also need to make ata_low_level_rw_lba{28,48} also take a const void.

Acked-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-15 11:54:02 -07:00
Tom Rini
5048a672d9 ata_piix: sata_write must take a const void argument.
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-15 11:54:02 -07:00
Tom Rini
879a57ac0e ata_piix: Fix checkpatch issues
While in here also:
- Switch to debug from custom PRINTF for debugging.
- Use mdelay rather than custom msleep.

Signed-off-by: Tom Rini <trini@ti.com>
2012-10-15 11:54:02 -07:00
Lukasz Dalek
e5f24753c9 usb.h: Add udc_disconnect prototype to usb.h
PXA25x gadget implements common function usb_disconnect().
This patch adds this function prototype into usb.h for boards using it.

Signed-off-by: Lukasz Dalek <luk0104@gmail.com>
2012-10-15 11:54:02 -07:00
Lukasz Dalek
3c09a2836d pxa25x: Add support for USB ethernet gadget
Add to pxa25x based devices support for USB ethernet gadget. This is a
port of pxa25x UDC driver from Linux kernel.

Signed-off-by: Lukasz Dalek <luk0104@gmail.com>
2012-10-15 11:54:01 -07:00
Lukasz Dalek
2bb378841e usbether: Removed DEV_CONFIG_{CDC,SUBSET}
Removed DEV_CONFIG_CDC and DEV_CONFIG_SUBSET and replaced it with
CONFIG_USB_ETH_CDC and CONFIG_USB_ETH_SUBSET.

Signed-off-by: Lukasz Dalek <luk0104@gmail.com>
2012-10-15 11:54:01 -07:00
Lukasz Dalek
4c43cd5a63 usbether: Define CONFIG_USB_ETH_{CDC,SUBSET}
Introduced CONFIG_USB_ETH_CDC and CONFIG_USB_ETH_SUBSET as preparation
for removal DEV_CONFIG_CDC and DEV_CONFIG_SUBSET

Signed-off-by: Lukasz Dalek <luk0104@gmail.com>
2012-10-15 11:54:01 -07:00
Lukasz Dalek
563aed2539 usbether: Fixed bug when using with PXA25X chips
PXA25X chips don't support alternate settings so driver uses non-CDC
driver.
But only code defined between DEV_CONFIG_CDC signals that network is up.
This patch is fixing this bug by signaling that network is up after USB
SET_INTERFACE request.

Signed-off-by: Lukasz Dalek <luk0104@gmail.com>
2012-10-15 11:54:01 -07:00
Lucas Stach
6d365ea0ac tegra20: add USB ULPI init code
This adds the required code to set up a ULPI USB port. It is
mostly a port of the Linux ULPI setup code with some tweaks
added for more correctness, discovered along the way of
debugging this.

To use this both CONFIG_USB_ULPI and CONFIG_USB_ULPI_VIEWPORT
have to be set in the board configuration file.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2012-10-15 11:54:01 -07:00
Lucas Stach
141288b3a3 usb: ulpi: add indicator configuration function
Allows for easy configuration of the VBUS indicator related ULPI
config bits.

Also move the external indicator setup from ulpi_set_vbus() to
the new function.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2012-10-15 11:54:01 -07:00
Lucas Stach
7a46b2c7f2 usb: ehci: don't print debug output
This is clearly some sort of debug output and should not
be printed during normal operation.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
2012-10-15 11:54:00 -07:00
Lucas Stach
a896211ff1 tegra20: port to new ehci interface
EHCI interface now supports more than one controller. Wire up our usb functions
to use this new interface.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
2012-10-15 11:54:00 -07:00
Lucas Stach
93c2582fea usb: add support for multiple usb controllers
Allows to initialize more than one USB controller at once.

v2: print message when controller stop fails

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Reviewed-by: Marek Vasut <marex@denx.de>
2012-10-15 11:54:00 -07:00
Lucas Stach
676ae068d9 usb: ehci: rework to take advantage of new lowlevel interface
Kill off ehci-core.h
It was used to specify some static controller data. To support more than
one controller being active at any time we have to carry the controller
data ourselfes. Change the ehci interface accordingly.

NOTE: OMAP implemented the ehci stuff a bit backwards and should be fixed
to do the same thing as other platforms. But the change for now is at least
compile clean.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Reviewed-by: Marek Vasut <marex@denx.de>
2012-10-15 11:54:00 -07:00
Lucas Stach
c7e3b2b586 usb: lowlevel interface change to support multiple controllers
Carry an index in the lowlevel usb functions to make specify the
respective usb controller.

Also pass through an controller struct from lowlevel_init to the
creation of the root usb device of this controller.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Reviewed-by: Marek Vasut <marex@denx.de>
2012-10-15 11:54:00 -07:00
Igor Grinberg
5527efe501 pmc405de and zeus: remove the env_ptr externs
The env_ptr is already declared in environment.h, so there is no need to
redeclare in board files (especially after including the environment.h)
Remove those declarations.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu>
2012-10-15 11:54:00 -07:00
Stefan Roese
a821d08dca ppc4xx: Remove AP1000 board support
As the board seems to be unmaintained for some time, lets remove
the support in mainline completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: James MacAulay <james.macaulay@amirix.com>
Acked-by: Marek Vasut <marex@denx.de>
2012-10-15 11:53:59 -07:00
Stefan Roese
dee9c534db ppc4xx: Remove ML2 board support
As the board seems to be unmaintained for some time, lets remove
the support in mainline completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Peter De Schrijver <p2@mind.be>
Acked-by: Marek Vasut <marex@denx.de>
2012-10-15 11:53:59 -07:00
Stefan Roese
99bcad1809 ppc4xx: Remove IOP480 support
Since the IOP480 (PPC401/3 variant from PLX) is only used on 2
boards that are not actively maintained, lets remove support
for it completely. This way the ppc4xx code will get a bit cleaner.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Acked-by: Marek Vasut <marex@denx.de>
2012-10-15 11:53:59 -07:00
Marek Vasut
f2760c4acd serial: Enhance the manual relocation
Enhance the manual relocation of drivers operations structure by
checking if the entries are NULL and increment them only if they
are not. This allows for setting any entry to NULL and it will
survive the manual relocation.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stefan Roese <sr@denx.de>
2012-10-15 11:53:59 -07:00
Marek Vasut
c1f5805a9d serial: Compile drivers/serial/serial.c by default
Compile drivers/serial/serial.c by default both into SPL and into
non-SPL builds, since CONFIG_SERIAL_MULTI is now the default state.
Also having common/serial.c in by default now, it's pointless to keep
-DCONFIG_SERIAL_MULTI in CPPFLAGS any longer, so remove it as well.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stefan Roese <sr@denx.de>
2012-10-15 11:53:59 -07:00
Marek Vasut
036036d79c serial: Remove CONFIG_SERIAL_MULTI from remaining sources
Remove the parts depending either on disabled CONFIG_SERIAL_MULTI
or ifdefs around CONFIG_SERIAL_MULTI parts since CONFIG_SERIAL_MULTI
is now enabled by default.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stefan Roese <sr@denx.de>
2012-10-15 11:53:59 -07:00
Marek Vasut
a382725060 serial: Remove CONFIG_SERIAL_MULTI from serial drivers
Remove the support for not-CONFIG_SERIAL_MULTI part from serial
port drivers and some board files. Since CONFIG_SERIAL_MULTI is
now enabled by default, that part is a dead code. Remove it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-15 11:53:58 -07:00