Commit Graph

111 Commits

Author SHA1 Message Date
Asherah Connor
1bed576d41 video: SIMPLE_PANEL depends on DM_GPIO
SIMPLE_PANEL currently only depends on PANEL && BACKLIGHT, but the code
makes references to dm_gpio_set_value and gpio_request_by_name.  These
are defined in drivers/gpio/gpio-uclass.c, so a dependency on DM_GPIO
corrects these link errors:

aarch64-linux-gnu-ld.bfd: drivers/built-in.o: in function `simple_panel_set_backlight':
/home/kameliya/u-boot/drivers/video/simple_panel.c:42: undefined reference to `dm_gpio_set_value'
aarch64-linux-gnu-ld.bfd: drivers/built-in.o: in function `simple_panel_enable_backlight':
/home/kameliya/u-boot/drivers/video/simple_panel.c:27: undefined reference to `dm_gpio_set_value'
aarch64-linux-gnu-ld.bfd: drivers/built-in.o: in function `simple_panel_of_to_plat':
/home/kameliya/u-boot/drivers/video/simple_panel.c:72: undefined reference to `gpio_request_by_name'

This issue is only exposed if you have a board which enables
CONFIG_DM_VIDEO without CONFIG_DM_GPIO; so far, none do, but soon a QEMU
board may.

Signed-off-by: Asherah Connor <ashe@kivikakk.ee>
2021-04-10 16:50:07 +02:00
Simon Glass
19987c9834 x86: video: Allow coreboot video to be used on any x86 board
When booting from coreboot we need this driver for the video to work.
Update the driver to be usable on any board.

The driver disables itself if it sees that is not booted from coreboot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27 15:04:30 +13:00
Moses Christopher
0f425612c8 drivers: video: Add Support for Himax HX8238D Panel
* SPI based initialization for HX8238D
* Resolution: 320x240
* Color-Mode: RGB

* Initial Work is done by Sjoerd Simons
  https://gitlab.apertis.org/packaging/u-boot/-/blob\
  /5f259720e3e64965d50da89a841ad6eb256a47df/debian/patches\
  /apertis/powertools/0005-video-Add-Himax-HX8238-D-driver.patch

* Tested on Bosch Guardian Board

Cc: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Moses Christopher <BollavarapuMoses.Christopher@in.bosch.com>
2021-02-19 23:38:06 +01:00
Dario Binacchi
196947b103 Replace video_uc_platdata with video_uc_plat
The video_uc_platdata structure no longer exists. It has been renamed
video_uc_plat.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
2021-02-19 22:45:47 +01:00
Marcin Juszkiewicz
9a3122f769 Kconfig: simple panel requires backlight
During build of simple panel driver backlight is needed so let's enable
it:

aarch64-linux-gnu-ld.bfd: drivers/built-in.o: in function `simple_panel_set_backlight':
u-boot/drivers/video/simple_panel.c:43: undefined reference to `backlight_set_brightness'
aarch64-linux-gnu-ld.bfd: drivers/built-in.o: in function `simple_panel_enable_backlight':
u-boot/drivers/video/simple_panel.c:28: undefined reference to `backlight_enable'

Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl>
2021-01-16 11:58:49 -05:00
Tom Rini
795f8fd0b5 - sync amlogic GX & AXG DT to Linux 5.10
- Add new MESON_EE driver support for GXBB & AXG
 - Add support for Libretech-CC v2, Wetek Core2, Beelink GT-King/Pro boards
 - add driver for TDO tl070wsh30 panel driver
 - meson: isolate loading of socinfo
 - Add soc_rev to environment
 - Enable G12A support for saradc
 - Add correct mmcdev on VIM3(L) & Odroid-N2(C4)
 - Read MAC from fuses for VIM3 & VIM3L boards
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAl/9rV0ACgkQd9zb2sjI
 SdFE0xAAtXzW98pKmC4C3a1FWcGSuBZK2gzUgKc8oTqBWodMTVLSmDGNbIpaES/+
 UySXSR0KJ5Qmu3jEZN2NYUKuABzylmIyT+5/sj1yN0zgxU2NB2//18uELNVKC4b+
 wtLna+SSebl8ofGuVzfYYCfbBS0S2Y+n9g2+WVu3s+D03WG5wrqEZy5RqKRf4OMZ
 MoQiDoLFms1GS6iLoidg/RMNme6efODAOTOVklHre2zeN3rjGei2URHdVtIeXcdG
 G3Wz9GVwR96UWTGY6JuXEGVpI459vHc4AcswnVcKNnILS/50tpSA9Gc0e0lXaDwT
 29DPehnoBkdbtIQ4szrAthGBITWhhgp2ksHaY5jyg38mVGF1/uu76kPUlCLxY5fL
 //3j/t+qaA3iwJq36tvZSKbprjA8sINN8Hsmi9+2Bzyv90sLfxY/x/DpeTVfWUQf
 UireG3iCYBkP5Mxr1kO+eJUoPAEe8BDJ+3AyVCjlMvKdomGFGCY0C/2LY54G8WS+
 el2Sj8XkTgtZQA/HXuXg1y2Cw54FWN6SXMVFXqZW5bu/w2GmeSOMEkFs3aFieCB7
 5UP+PiA3aM9Z6oXJReNnwc7iy+de8peZ/gpNCqWxr/jxg/C5d+Lg3kgbr961MyhU
 e97xab9p3f9raVOrYCAP7jVqAfTS39ZtAzSZlSJcK3Pls9wVxJI=
 =iIWq
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20210112' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- sync amlogic GX & AXG DT to Linux 5.10
- Add new MESON_EE driver support for GXBB & AXG
- Add support for Libretech-CC v2, Wetek Core2, Beelink GT-King/Pro boards
- add driver for TDO tl070wsh30 panel driver
- meson: isolate loading of socinfo
- Add soc_rev to environment
- Enable G12A support for saradc
- Add correct mmcdev on VIM3(L) & Odroid-N2(C4)
- Read MAC from fuses for VIM3 & VIM3L boards
2021-01-13 07:32:02 -05:00
Dario Binacchi
260cbc9af2 video: omap: move drivers to 'ti' directory
Add drivers/video/ti/ folder and move all TI's code in this folder for
better maintenance.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
2021-01-12 10:59:04 +05:30
Neil Armstrong
c823f2438c video: add TDO tl070wsh30 panel driver
This adds support for the TDO TL070WSH30 TFT-LCD panel module.
The panel has a 1024×600 resolution and uses 24 bit RGB per pixel.
It provides a MIPI DSI interface to the host, a built-in LED backlight
and touch controller.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-01-11 14:59:54 +01:00
Michal Simek
b66d7af41f video: seps525: Add seps525 SPI driver
Add support for the WiseChip Semiconductor Inc. (UG-6028GDEBF02) display
using the SEPS525 (Syncoam) LCD Controller. Syncoam Seps525 PM-Oled is RGB
160x128 display. This driver has been tested through zynq-spi driver.

ZynqMP> load mmc 1 100000 rainbow.bmp
61562 bytes read in 20 ms (2.9 MiB/s)
ZynqMP> bmp info 100000
Image size    : 160 x 128
Bits per pixel: 24
Compression   : 0
ZynqMP> bmp display 100000
ZynqMP> setenv stdout vidconsole

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-05 11:54:53 +01:00
Anatolij Gustschin
9dec5a0ea1 nokia_rx51: disable obsolete VIDEO config
Disable VIDEO config to fix DM_VIDEO conversion
deadline warning.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-10-26 20:55:51 +01:00
Anatolij Gustschin
8c9940d5ec eb_cpu5282: fix CONFIG_DM_VIDEO build warnings
Remove CONFIG_VIDEO dependency to fix board removal warnings.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Jens Scharsig <esw@bus-elektronik.de>
2020-10-26 20:55:29 +01:00
Patrick Delaunay
8fc78fc73b configs: migrate CONFIG_BMP_16/24/32BPP to defconfigs
Done with:
./tools/moveconfig.py BMP_16BPP BMP_24BPP BMP_32BPP

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-18 15:27:01 +02:00
Patrick Delaunay
f9a48654ee configs: migrate CONFIG_VIDEO_BMP_RLE8 to defconfigs
Done with:
./tools/moveconfig.py VIDEO_BMP_RLE8

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-18 15:26:14 +02:00
Patrick Delaunay
0ed6c0f9cb configs: migrate CONFIG_VIDEO_BMP_GZIP to defconfigs
Done with:
./tools/moveconfig.py VIDEO_BMP_GZIP

The 3 suspicious migration because CMD_BMP and SPLASH_SCREEN
are not activated in these defconfigs:
- trats_defconfig
- s5pc210_universal_defconfig
- trats2_defconfig

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-18 15:25:28 +02:00
Simon Glass
35bd70c510 Convert CONFIG_SPLASH_SCREEN et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SPLASH_SCREEN
   CONFIG_SPLASH_SCREEN_ALIGN
   CONFIG_SPLASHIMAGE_GUARD
   CONFIG_SPLASH_SOURCE

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-23 13:43:10 -04:00
Stefan Bosch
e1e96ba6a2 video: add nexell video driver (display/video driver)
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
- nexell_display.c: Changed to DM, CONFIG_FB_ADDR can not be used
  anymore because framebuffer is allocated by video_reserve() in
  video-uclass.c. Therefore code changed appropriately.
- '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where
  possible (and similar).
- livetree API (dev_read_...) is used instead of fdt one (fdt...).

Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-29 08:43:40 -04:00
Simon Glass
551ca0e647 x86: video: Support copy framebuffer with probed devices
For PCI video devices that are not mentioned in the devicetree, U-Boot
does not bind a driver before relocation, since PCI is not fully probed
at that point. Furthermore it is possible for the video device to be on
a secondary bus which is not even scanned.

This is fine if the framebuffer is allocated in fixed memory, as it
normally is on x86. But when using this as a copy framebuffer, we also
need U-Boot to allocate its own cached framebuffer for working in. Since
the video driver is never bound before relocation, the framebuffer size
is never set and U-Boot does no allocation.

Add a new CONFIG option to reserve 16MB of memory for this eventuality.
This allows vesa devices to use the copy framebuffer.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09 12:33:24 +08:00
Simon Glass
9beac5daf7 video: Add support for copying to a hardware framebuffer
Some architectures use a cached framebuffer and flush the cache as needed
so that changes are visible. This is supported by U-Boot.

However x86 uses an uncached framebuffer with a 'write-combining' feature
to speed up writes.  Reads are permitted but they are extremely expensive.

Unfortunately, reading from the frame buffer is quite common, e.g. to
scroll it. This makes scrolling very slow.

Add a new feature which supports copying modified parts of the frame
buffer to the uncached hardware buffer. This speeds up scrolling by at
least 10x on x86 so the extra complexity cost seems worth it.

As a starting point, add the Kconfig, update the video structures to keep
track of the buffer and add a function to do the copy.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09 12:33:24 +08:00
Patrick Delaunay
27b5b9ec93 video: restore CONFIG_VIDCONSOLE_AS_LCD as boolean
This patch restores CONFIG_VIDCONSOLE_AS_LCD as boolean
and introduce a separate sting as CONFIG_VIDCONSOLE_AS_NAME
to search this string in stdout used as videoconsole.

This patch avoid issue with board defconfig or code expecting
CONFIG_VIDCONSOLE_AS_LCD as boolean.

Fixes: 22b897a123 ("video: extend stdout video console work-around for 'vga'")
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-06 16:30:00 -04:00
Tom Rini
a60becc8c7 Convert CONFIG_ATMEL_HLCD to Kconfig
This converts the following to Kconfig:
   CONFIG_ATMEL_HLCD

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26 10:29:04 -04:00
Tom Rini
0735ac8522 Convert CONFIG_AM335X_LCD to Kconfig
This converts the following to Kconfig:
   CONFIG_AM335X_LCD

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26 10:29:04 -04:00
Anatolij Gustschin
22b897a123 video: extend stdout video console work-around for 'vga'
cfb_console driver uses 'vga' console name and we still have board
environments defining this name. Re-use existing DM_VIDEO work-
around for console name to support 'vga' name in stdout environment.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Tested-by: Soeren Moch <smoch@web.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-06-18 19:30:14 +02:00
Anatolij Gustschin
e26e520046 video: make backlight and panel drivers optional
Not all boards use these drivers, so allow to disable them to fix
building boards with U-Boot binary image size restrictions.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-06-18 19:28:36 +02:00
Anatolij Gustschin
39b95556f9 video: make vidconsole commands optional
Converting some boards to DM_VIDEO results in build breakage due
to increased code size. Make video console specific commands
optional to reduce binary size.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-06-18 19:26:54 +02:00
Trevor Woerner
18138ab203 rename symbol: CONFIG_TEGRA -> CONFIG_ARCH_TEGRA
Have this symbol follow the pattern of all other such symbols.

Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-15 14:47:35 -04:00
Dario Binacchi
96b109ba74 video: omap: add support for DM/DTS
Update the driver to support the device tree and the driver model.
Timings and panel parameters are now loaded from the device tree.

The DM code replaces the am335x_lcdpanel structure with
tilcdc_panel_info taken from the linux kernel, as well the management
of additional parameters not covered in the legacy code. In addition,
the am335x_lcdpanel structure contains parameters and operations that
were probably a requirement of the board for which this driver was
developed and which, however, were not developed in the linux kernel.
All this led to rewrite th DM controller initialization code, except
for the pixel clock setting that is executed in a function created in a
previous patch with code taken from the legacy am335xfb_init.

The patch has been tested on a custom board with u-boot 2018.11-rc2 and
the following device-tree configuration:

	panel {
		compatible = "ti,tilcdc,panel";
		pinctrl-names = "default";
		pinctrl-0 = <&lcd_enable_pins>;
		enable-gpios = <&gpio0 31 0>;
		backlight = <&backlight>;
		status = "okay";
		u-boot,dm-pre-reloc;
		panel-info {
			ac-bias           = <255>;
			ac-bias-intrpt    = <0>;
			dma-burst-sz      = <16>;
			bpp               = <16>;
			fdd               = <0x80>;
			sync-edge         = <0>;
			sync-ctrl         = <1>;
			raster-order      = <0>;
			fifo-th           = <0>;
		};
		display-timings {
			native-mode = <&timing0>;
			timing0: 800x480 {
				hactive         = <800>;
				vactive         = <480>;
				hback-porch     = <46>;
				hfront-porch    = <210>;
				hsync-len       = <20>;
				vback-porch     = <23>;
				vfront-porch    = <22>;
				vsync-len       = <10>;
				clock-frequency = <33000000>;
				hsync-active    = <0>;
				vsync-active    = <0>;
			};
		};
	};

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Tested-by: Dario Binacchi <dariobin@libero.it>
2020-03-03 13:08:14 +05:30
Anatolij Gustschin
8a6ffeda97 video: enable VIDEO_ANSI and all VIDEO_BBP options
This partially reverts changes by commit 2cc393f32f
("video: make BPP and ANSI configs optional") since it
caused issues with other boards (missing LCD console
output on pinebook, x86 platform or sandbox). Enable
all disabled options again and opt out of not supported
color depth in board defconfigs.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reported-by: Vagrant Cascadian <vagrant@debian.org>
2020-02-06 16:11:47 -05:00
Simon Glass
512563ba0b video: x86: Enable 32-bit graphics by default
Most x86 boards that use video make use of 32bpp graphics. Enable this by
default. This fixes missing graphics output on some x86 boards.

Also remove the unnecessary 'default n' while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-02 16:25:25 +01:00
Anatolij Gustschin
2cc393f32f video: make BPP and ANSI configs optional
Many boards do not use all selected framebuffer depth
configurations, for such boards there is some unused
code in video and console uclass routines. Make depth
specific code optional to avoid dead code and slightly
reduce binary size. Also make ANSI code optional for
the same reason. When i.e. using only VIDEO_BPP16 the
code size shrinks (below values when using gcc-7.3.0):

  $ ./tools/buildman/buildman -b video-wip -sS wandboard
  ...
  01: Merge git://git.denx.de/u-boot-sh
  02: video: add guards around 16bpp/32bbp code
  03: video: make BPP and ANSI configs optional
         arm: (for 1/1 boards) all -776.0 bss -8.0 text -768.0

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Tested-by: Eugen Hristev <eugen.hristev@microchip.com>
Tested-by: Patrice Chotard <patrice.chotard@st.com>
Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
2019-12-06 16:38:51 +01:00
Yannick Fertré
06ef131d30 video: add support of panel RM68200
Support for Raydium RM68200 720p dsi 2dl video mode panel.
This rm68200 panel driver is based on the Linux Kernel driver from
drivers/gpu/drm/panel/panel-raydium-rm68200.c.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 23:38:36 +02:00
Yannick Fertré
78157b2fa5 video: add support of panel OTM8009A
Support for Orise Tech otm8009a 480p dsi 2dl video mode panel.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 23:38:26 +02:00
Yannick Fertré
d4f7ea83fc video: add MIPI DSI host controller bridge
Add a Synopsys Designware MIPI DSI host bridge driver, based on the
Rockchip version from rockchip/dw-mipi-dsi.c with phy & bridge APIs.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 23:37:08 +02:00
Yannick Fertré
23f965a4c6 dm: Add a dsi host uclass
Display Serial Interface (DSI) host can usefully be modelled
as their own uclass.
DSI defines a serial bus and a communication protocol
between the host and the device (panel, bridge).

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 23:34:43 +02:00
Yannick Fertré
66c3724656 video: add support of MIPI DSI interface
Mipi_display.c contains a set of dsi helpers.
This file is a copy of file drm_mipi_dsi.c (linux kernel).

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 21:24:47 +02:00
Igor Opaniuk
be3f1a56bf video: fsl_dcu_fb: add DM_VIDEO support
Extend the driver to build with DM_VIDEO enabled. DTS files
must additionally include 'u-boot,dm-pre-reloc' property in
soc and child nodes to enable driver binding to fsl_dcu_fb device.

Currently display timings aren't obtained from DT.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29 00:09:06 +02:00
Tom Rini
75ce8c938d Move to DM
-----------
 
 - DM support in sata
 - Toradex Board to DM
 - wandboard to DM
 - tbs2910 to DM
 - GE boards to DM
 - VHybrid boards to DM
 - DM_VIDEO for i.MX
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAly0NhIPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3XiUMALq2W4HPjFlDaVHpaxKIvZMkqAAjF7eE6M9l
 DWivSm/Anm5jeE2UM80FpV7npdkPMcOl2YdcIjg+jMKKP6DI+4N6gEhWvxX9mEoC
 RmR2nxGC/GIc0Blb4HU9V6xMkeR5jSAQ6bxZmX3IrnG6u67BIi4NmkNrT9gdQ+WT
 PkJf2Ai7DN7+epfOzjO0d/LjS3hAVb+nesHuxoVraElwc5sEMAnoD0vIMUrXceZ2
 +V6WiU1i9jeLj3fA8P+4o6wqQpxFLlJiuC0FUNKQH/kWIqX6MGrr9ElseLUV0O+Z
 LL5nqsuTgG/fAol1r71De49fiML2Pfx7ZkAZOJ1NMUOXUKw25ulO/wi0wg8t+l2Z
 2oAQ3S84RUVYX4MFLwxkBCq3uC9hvyCfWF1GmVLV6xSEulS6PnHx0FL6OTY4uB3h
 bmVs/mutwwqYBaaoqGG4sG5L7TVSG/JxNgTVNh3Aqj5a89Fd9us+nBhLhoq6xyVl
 cEf+/gPGQ97JEj9DolAPFIFQJBvL7g==
 =KLsH
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20190415' of git://git.denx.de/u-boot-imx

Move to DM
-----------

- DM support in sata
- Toradex Board to DM
- wandboard to DM
- tbs2910 to DM
- GE boards to DM
- VHybrid boards to DM
- DM_VIDEO for i.MX
2019-04-15 07:31:14 -04:00
Andre Przywara
7b64a70a3a sunxi: allow boards to de-select SYS_WHITE_ON_BLACK font scheme
In the sunxi-common.h config header we unconditionally define
CONFIG_SYS_WHITE_ON_BLACK, although it's actually a Kconfig option which
could be individually selected by a user.
Remove this #define from the header and let it default to "y" on sunxi
boards (like we do for other platforms).

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-14 14:18:48 +02:00
Anatolij Gustschin
bffd13144b video: move ipuv3 files to subdirectory
Place ipuv3 files and headers in custom driver subdirectory.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13 20:30:09 +02:00
Anatolij Gustschin
57f065fee2 video: ipuv3: add DM_VIDEO support
Extend the driver to build with DM_VIDEO enabled. DTS files
must additionally include 'u-boot,dm-pre-reloc' property in
soc and ipu nodes to enable driver binding to ipu device.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13 20:30:09 +02:00
Neil Armstrong
3bed422094 video: Add Meson Video Processing Unit Driver
This adds video output support for Amlogic GXBB/GXL/GXM chips.
The supported ports are CVBS and HDMI (based on DW_HDMI).

When using HDMI, only DMT modes are supported.

There is support for simple-framebuffer (CONFIG_VIDEO_DT_SIMPLEFB)

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jorge Ramire-Ortiz <jramirez@baylibre.com>
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
[narmstrong: fixed defines alignment in meson_canvas.c]
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-01-31 09:35:01 +01:00
Liviu Dudau
c1a65a8c59 video: Add support for Arm's Mali Display Processors
Add support for Arm Mali Display Processors DP500, DP550 and DP650.
Only one layer is being used to display the console or boot logo,
even if more layers are supported in the hardware.

Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com>
2018-09-28 19:11:44 +02:00
Liviu Dudau
055da186a1 video: Add support for NXP's TDA19988 HDMI encoder
Add support for the NXP TDA19988 HDMI encoder as used on the Juno
development board from Arm.

Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com>
2018-09-28 18:44:50 +02:00
Mario Six
4eea531859 video_osd: Add osd sandbox driver and tests
Add sandbox driver and tests for the new OSD uclass.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-28 18:26:52 +02:00
Mario Six
9671f696e5 video_osd: Add ihs_video_out driver
Add a driver for IHS OSDs on IHS FPGAs.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-28 18:26:44 +02:00
Mario Six
39a336f116 drivers: Add OSD uclass
Some devices offer a text-based OSD (on-screen display) that can be
programmatically controlled (i.e. text displayed on).

Add a uclass to support such devices.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-28 18:26:32 +02:00
Adam Ford
244eaea60b Convert CONFIG_VIDEO_OMAP3 to Kconfig
This converts the following to Kconfig:
   CONFIG_VIDEO_OMAP3

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-08-17 13:04:00 -04:00
Mario Six
25a9f9747a video_display: Add Xilinx LogiCore DP TX
Add a driver for the Xilinx LogiCORE DisplayPort IP core, which is a
pure DP transmitter core for Xiling FPGA (no display capabilities).

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-08-11 09:18:44 +02:00
Luis Araneda
ba71ab8246 video: kconfig: remove DM_I2C dependency of I2C_EDID
Drop the DM_I2C dependency, as the library only implements
the parsing of EDID data and doesn't depend on any driver

One user of this library, the i2c command, implements
support for legacy and DM I2C drivers

Tested on a Zynq board, whose I2C driver is not ported
yet to DM

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2018-08-01 14:45:14 +02:00
Bin Meng
4a08c74697 dm: video: Add an EFI framebuffer driver
This adds a DM video driver for U-Boot as the EFI payload. The driver
makes use of all necessary information from the passed EFI GOP info
to create a linear framebuffer device, as if it were initialized by
U-Boot itself.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2018-06-17 21:16:04 +08:00
Bin Meng
17b07d70be video: vesa: Change default FRAMEBUFFER_VESA_MODE
This changes the default FRAMEBUFFER_VESA_MODE to use 32-bit pixel
format for better VxWorks compatibility.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-16 22:38:51 +08:00