video: add support of MIPI DSI interface

Mipi_display.c contains a set of dsi helpers.
This file is a copy of file drm_mipi_dsi.c (linux kernel).

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
This commit is contained in:
Yannick Fertré 2019-10-07 15:29:04 +02:00 committed by Anatolij Gustschin
parent 7389776cda
commit 66c3724656
4 changed files with 1303 additions and 0 deletions

View File

@ -73,6 +73,14 @@ config VIDEO_ANSI
Enable ANSI escape sequence decoding for a more fully functional
console.
config VIDEO_MIPI_DSI
bool "Support MIPI DSI interface"
depends on DM_VIDEO
help
Support MIPI DSI interface for driving a MIPI compatible device.
The MIPI Display Serial Interface (MIPI DSI) defines a high-speed
serial interface between a host processor and a display module.
config CONSOLE_NORMAL
bool "Support a simple text console"
depends on DM_VIDEO

View File

@ -53,6 +53,7 @@ obj-$(CONFIG_VIDEO_LCD_HITACHI_TX18D42VM) += hitachi_tx18d42vm_lcd.o
obj-$(CONFIG_VIDEO_LCD_SSD2828) += ssd2828.o
obj-$(CONFIG_VIDEO_MB862xx) += mb862xx.o videomodes.o
obj-${CONFIG_VIDEO_MESON} += meson/
obj-${CONFIG_VIDEO_MIPI_DSI} += mipi_dsi.o
obj-$(CONFIG_VIDEO_MVEBU) += mvebu_lcd.o
obj-$(CONFIG_VIDEO_MX3) += mx3fb.o videomodes.o
obj-$(CONFIG_VIDEO_MXS) += mxsfb.o videomodes.o

828
drivers/video/mipi_dsi.c Normal file
View File

@ -0,0 +1,828 @@
// SPDX-License-Identifier: GPL-2.0
/*
* MIPI DSI Bus
*
* Copyright (C) 2012-2013, Samsung Electronics, Co., Ltd.
* Copyright (C) 2019 STMicroelectronics - All Rights Reserved
* Andrzej Hajda <a.hajda@samsung.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
* OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
* USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* Mipi_dsi.c contains a set of dsi helpers.
* This file is inspired from the drm helper file drivers/gpu/drm/drm_mipi_dsi.c
* (kernel linux).
*
*/
#include <common.h>
#include <clk.h>
#include <display.h>
#include <dm.h>
#include <mipi_display.h>
#include <mipi_dsi.h>
/**
* DOC: dsi helpers
*
* These functions contain some common logic and helpers to deal with MIPI DSI
* peripherals.
*
* Helpers are provided for a number of standard MIPI DSI command as well as a
* subset of the MIPI DCS command set.
*/
/**
* mipi_dsi_attach - attach a DSI device to its DSI host
* @dsi: DSI peripheral
*/
int mipi_dsi_attach(struct mipi_dsi_device *dsi)
{
const struct mipi_dsi_host_ops *ops = dsi->host->ops;
if (!ops || !ops->attach)
return -ENOSYS;
return ops->attach(dsi->host, dsi);
}
EXPORT_SYMBOL(mipi_dsi_attach);
/**
* mipi_dsi_detach - detach a DSI device from its DSI host
* @dsi: DSI peripheral
*/
int mipi_dsi_detach(struct mipi_dsi_device *dsi)
{
const struct mipi_dsi_host_ops *ops = dsi->host->ops;
if (!ops || !ops->detach)
return -ENOSYS;
return ops->detach(dsi->host, dsi);
}
EXPORT_SYMBOL(mipi_dsi_detach);
/**
* mipi_dsi_device_transfer - transfer message to a DSI device
* @dsi: DSI peripheral
* @msg: message
*/
static ssize_t mipi_dsi_device_transfer(struct mipi_dsi_device *dsi,
struct mipi_dsi_msg *msg)
{
const struct mipi_dsi_host_ops *ops = dsi->host->ops;
if (!ops || !ops->transfer)
return -ENOSYS;
if (dsi->mode_flags & MIPI_DSI_MODE_LPM)
msg->flags |= MIPI_DSI_MSG_USE_LPM;
return ops->transfer(dsi->host, msg);
}
/**
* mipi_dsi_packet_format_is_short - check if a packet is of the short format
* @type: MIPI DSI data type of the packet
*
* Return: true if the packet for the given data type is a short packet, false
* otherwise.
*/
bool mipi_dsi_packet_format_is_short(u8 type)
{
switch (type) {
case MIPI_DSI_V_SYNC_START:
case MIPI_DSI_V_SYNC_END:
case MIPI_DSI_H_SYNC_START:
case MIPI_DSI_H_SYNC_END:
case MIPI_DSI_END_OF_TRANSMISSION:
case MIPI_DSI_COLOR_MODE_OFF:
case MIPI_DSI_COLOR_MODE_ON:
case MIPI_DSI_SHUTDOWN_PERIPHERAL:
case MIPI_DSI_TURN_ON_PERIPHERAL:
case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM:
case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM:
case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM:
case MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM:
case MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM:
case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM:
case MIPI_DSI_DCS_SHORT_WRITE:
case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
case MIPI_DSI_DCS_READ:
case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
return true;
}
return false;
}
EXPORT_SYMBOL(mipi_dsi_packet_format_is_short);
/**
* mipi_dsi_packet_format_is_long - check if a packet is of the long format
* @type: MIPI DSI data type of the packet
*
* Return: true if the packet for the given data type is a long packet, false
* otherwise.
*/
bool mipi_dsi_packet_format_is_long(u8 type)
{
switch (type) {
case MIPI_DSI_NULL_PACKET:
case MIPI_DSI_BLANKING_PACKET:
case MIPI_DSI_GENERIC_LONG_WRITE:
case MIPI_DSI_DCS_LONG_WRITE:
case MIPI_DSI_LOOSELY_PACKED_PIXEL_STREAM_YCBCR20:
case MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR24:
case MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16:
case MIPI_DSI_PACKED_PIXEL_STREAM_30:
case MIPI_DSI_PACKED_PIXEL_STREAM_36:
case MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12:
case MIPI_DSI_PACKED_PIXEL_STREAM_16:
case MIPI_DSI_PACKED_PIXEL_STREAM_18:
case MIPI_DSI_PIXEL_STREAM_3BYTE_18:
case MIPI_DSI_PACKED_PIXEL_STREAM_24:
return true;
}
return false;
}
EXPORT_SYMBOL(mipi_dsi_packet_format_is_long);
/**
* mipi_dsi_create_packet - create a packet from a message according to the
* DSI protocol
* @packet: pointer to a DSI packet structure
* @msg: message to translate into a packet
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_create_packet(struct mipi_dsi_packet *packet,
const struct mipi_dsi_msg *msg)
{
if (!packet || !msg)
return -EINVAL;
/* do some minimum sanity checking */
if (!mipi_dsi_packet_format_is_short(msg->type) &&
!mipi_dsi_packet_format_is_long(msg->type))
return -EINVAL;
if (msg->channel > 3)
return -EINVAL;
memset(packet, 0, sizeof(*packet));
packet->header[0] = ((msg->channel & 0x3) << 6) | (msg->type & 0x3f);
/* TODO: compute ECC if hardware support is not available */
/*
* Long write packets contain the word count in header bytes 1 and 2.
* The payload follows the header and is word count bytes long.
*
* Short write packets encode up to two parameters in header bytes 1
* and 2.
*/
if (mipi_dsi_packet_format_is_long(msg->type)) {
packet->header[1] = (msg->tx_len >> 0) & 0xff;
packet->header[2] = (msg->tx_len >> 8) & 0xff;
packet->payload_length = msg->tx_len;
packet->payload = msg->tx_buf;
} else {
const u8 *tx = msg->tx_buf;
packet->header[1] = (msg->tx_len > 0) ? tx[0] : 0;
packet->header[2] = (msg->tx_len > 1) ? tx[1] : 0;
}
packet->size = sizeof(packet->header) + packet->payload_length;
return 0;
}
EXPORT_SYMBOL(mipi_dsi_create_packet);
/**
* mipi_dsi_shutdown_peripheral() - sends a Shutdown Peripheral command
* @dsi: DSI peripheral device
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_shutdown_peripheral(struct mipi_dsi_device *dsi)
{
struct mipi_dsi_msg msg = {
.channel = dsi->channel,
.type = MIPI_DSI_SHUTDOWN_PERIPHERAL,
.tx_buf = (u8 [2]) { 0, 0 },
.tx_len = 2,
};
int ret = mipi_dsi_device_transfer(dsi, &msg);
return (ret < 0) ? ret : 0;
}
EXPORT_SYMBOL(mipi_dsi_shutdown_peripheral);
/**
* mipi_dsi_turn_on_peripheral() - sends a Turn On Peripheral command
* @dsi: DSI peripheral device
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_turn_on_peripheral(struct mipi_dsi_device *dsi)
{
struct mipi_dsi_msg msg = {
.channel = dsi->channel,
.type = MIPI_DSI_TURN_ON_PERIPHERAL,
.tx_buf = (u8 [2]) { 0, 0 },
.tx_len = 2,
};
int ret = mipi_dsi_device_transfer(dsi, &msg);
return (ret < 0) ? ret : 0;
}
EXPORT_SYMBOL(mipi_dsi_turn_on_peripheral);
/*
* mipi_dsi_set_maximum_return_packet_size() - specify the maximum size of the
* the payload in a long packet transmitted from the peripheral back to the
* host processor
* @dsi: DSI peripheral device
* @value: the maximum size of the payload
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi,
u16 value)
{
u8 tx[2] = { value & 0xff, value >> 8 };
struct mipi_dsi_msg msg = {
.channel = dsi->channel,
.type = MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE,
.tx_len = sizeof(tx),
.tx_buf = tx,
};
int ret = mipi_dsi_device_transfer(dsi, &msg);
return (ret < 0) ? ret : 0;
}
EXPORT_SYMBOL(mipi_dsi_set_maximum_return_packet_size);
/**
* mipi_dsi_generic_write() - transmit data using a generic write packet
* @dsi: DSI peripheral device
* @payload: buffer containing the payload
* @size: size of payload buffer
*
* This function will automatically choose the right data type depending on
* the payload length.
*
* Return: The number of bytes transmitted on success or a negative error code
* on failure.
*/
ssize_t mipi_dsi_generic_write(struct mipi_dsi_device *dsi, const void *payload,
size_t size)
{
struct mipi_dsi_msg msg = {
.channel = dsi->channel,
.tx_buf = payload,
.tx_len = size
};
switch (size) {
case 0:
msg.type = MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM;
break;
case 1:
msg.type = MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM;
break;
case 2:
msg.type = MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM;
break;
default:
msg.type = MIPI_DSI_GENERIC_LONG_WRITE;
break;
}
return mipi_dsi_device_transfer(dsi, &msg);
}
EXPORT_SYMBOL(mipi_dsi_generic_write);
/**
* mipi_dsi_generic_read() - receive data using a generic read packet
* @dsi: DSI peripheral device
* @params: buffer containing the request parameters
* @num_params: number of request parameters
* @data: buffer in which to return the received data
* @size: size of receive buffer
*
* This function will automatically choose the right data type depending on
* the number of parameters passed in.
*
* Return: The number of bytes successfully read or a negative error code on
* failure.
*/
ssize_t mipi_dsi_generic_read(struct mipi_dsi_device *dsi, const void *params,
size_t num_params, void *data, size_t size)
{
struct mipi_dsi_msg msg = {
.channel = dsi->channel,
.tx_len = num_params,
.tx_buf = params,
.rx_len = size,
.rx_buf = data
};
switch (num_params) {
case 0:
msg.type = MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM;
break;
case 1:
msg.type = MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM;
break;
case 2:
msg.type = MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM;
break;
default:
return -EINVAL;
}
return mipi_dsi_device_transfer(dsi, &msg);
}
EXPORT_SYMBOL(mipi_dsi_generic_read);
/**
* mipi_dsi_dcs_write_buffer() - transmit a DCS command with payload
* @dsi: DSI peripheral device
* @data: buffer containing data to be transmitted
* @len: size of transmission buffer
*
* This function will automatically choose the right data type depending on
* the command payload length.
*
* Return: The number of bytes successfully transmitted or a negative error
* code on failure.
*/
ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi,
const void *data, size_t len)
{
struct mipi_dsi_msg msg = {
.channel = dsi->channel,
.tx_buf = data,
.tx_len = len
};
switch (len) {
case 0:
return -EINVAL;
case 1:
msg.type = MIPI_DSI_DCS_SHORT_WRITE;
break;
case 2:
msg.type = MIPI_DSI_DCS_SHORT_WRITE_PARAM;
break;
default:
msg.type = MIPI_DSI_DCS_LONG_WRITE;
break;
}
return mipi_dsi_device_transfer(dsi, &msg);
}
EXPORT_SYMBOL(mipi_dsi_dcs_write_buffer);
/**
* mipi_dsi_dcs_write() - send DCS write command
* @dsi: DSI peripheral device
* @cmd: DCS command
* @data: buffer containing the command payload
* @len: command payload length
*
* This function will automatically choose the right data type depending on
* the command payload length.
*
* Return: The number of bytes successfully transmitted or a negative error
* code on failure.
*/
ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd,
const void *data, size_t len)
{
ssize_t err;
size_t size;
u8 *tx;
if (len > 0) {
size = 1 + len;
tx = kmalloc(size, GFP_KERNEL);
if (!tx)
return -ENOMEM;
/* concatenate the DCS command byte and the payload */
tx[0] = cmd;
memcpy(&tx[1], data, len);
} else {
tx = &cmd;
size = 1;
}
err = mipi_dsi_dcs_write_buffer(dsi, tx, size);
if (len > 0)
kfree(tx);
return err;
}
EXPORT_SYMBOL(mipi_dsi_dcs_write);
/**
* mipi_dsi_dcs_read() - send DCS read request command
* @dsi: DSI peripheral device
* @cmd: DCS command
* @data: buffer in which to receive data
* @len: size of receive buffer
*
* Return: The number of bytes read or a negative error code on failure.
*/
ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data,
size_t len)
{
struct mipi_dsi_msg msg = {
.channel = dsi->channel,
.type = MIPI_DSI_DCS_READ,
.tx_buf = &cmd,
.tx_len = 1,
.rx_buf = data,
.rx_len = len
};
return mipi_dsi_device_transfer(dsi, &msg);
}
EXPORT_SYMBOL(mipi_dsi_dcs_read);
/**
* mipi_dsi_dcs_nop() - send DCS nop packet
* @dsi: DSI peripheral device
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi)
{
ssize_t err;
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_NOP, NULL, 0);
if (err < 0)
return err;
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_nop);
/**
* mipi_dsi_dcs_soft_reset() - perform a software reset of the display module
* @dsi: DSI peripheral device
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi)
{
ssize_t err;
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SOFT_RESET, NULL, 0);
if (err < 0)
return err;
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_soft_reset);
/**
* mipi_dsi_dcs_get_power_mode() - query the display module's current power
* mode
* @dsi: DSI peripheral device
* @mode: return location for the current power mode
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device *dsi, u8 *mode)
{
ssize_t err;
err = mipi_dsi_dcs_read(dsi, MIPI_DCS_GET_POWER_MODE, mode,
sizeof(*mode));
if (err <= 0) {
if (err == 0)
err = -ENODATA;
return err;
}
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_get_power_mode);
/**
* mipi_dsi_dcs_get_pixel_format() - gets the pixel format for the RGB image
* data used by the interface
* @dsi: DSI peripheral device
* @format: return location for the pixel format
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_get_pixel_format(struct mipi_dsi_device *dsi, u8 *format)
{
ssize_t err;
err = mipi_dsi_dcs_read(dsi, MIPI_DCS_GET_PIXEL_FORMAT, format,
sizeof(*format));
if (err <= 0) {
if (err == 0)
err = -ENODATA;
return err;
}
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_get_pixel_format);
/**
* mipi_dsi_dcs_enter_sleep_mode() - disable all unnecessary blocks inside the
* display module except interface communication
* @dsi: DSI peripheral device
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi)
{
ssize_t err;
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_ENTER_SLEEP_MODE, NULL, 0);
if (err < 0)
return err;
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_enter_sleep_mode);
/**
* mipi_dsi_dcs_exit_sleep_mode() - enable all blocks inside the display
* module
* @dsi: DSI peripheral device
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi)
{
ssize_t err;
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_EXIT_SLEEP_MODE, NULL, 0);
if (err < 0)
return err;
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_exit_sleep_mode);
/**
* mipi_dsi_dcs_set_display_off() - stop displaying the image data on the
* display device
* @dsi: DSI peripheral device
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi)
{
ssize_t err;
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_OFF, NULL, 0);
if (err < 0)
return err;
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_set_display_off);
/**
* mipi_dsi_dcs_set_display_on() - start displaying the image data on the
* display device
* @dsi: DSI peripheral device
*
* Return: 0 on success or a negative error code on failure
*/
int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi)
{
ssize_t err;
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_ON, NULL, 0);
if (err < 0)
return err;
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_set_display_on);
/**
* mipi_dsi_dcs_set_column_address() - define the column extent of the frame
* memory accessed by the host processor
* @dsi: DSI peripheral device
* @start: first column of frame memory
* @end: last column of frame memory
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start,
u16 end)
{
u8 payload[4] = { start >> 8, start & 0xff, end >> 8, end & 0xff };
ssize_t err;
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_COLUMN_ADDRESS, payload,
sizeof(payload));
if (err < 0)
return err;
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_set_column_address);
/**
* mipi_dsi_dcs_set_page_address() - define the page extent of the frame
* memory accessed by the host processor
* @dsi: DSI peripheral device
* @start: first page of frame memory
* @end: last page of frame memory
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start,
u16 end)
{
u8 payload[4] = { start >> 8, start & 0xff, end >> 8, end & 0xff };
ssize_t err;
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_PAGE_ADDRESS, payload,
sizeof(payload));
if (err < 0)
return err;
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_set_page_address);
/**
* mipi_dsi_dcs_set_tear_off() - turn off the display module's Tearing Effect
* output signal on the TE signal line
* @dsi: DSI peripheral device
*
* Return: 0 on success or a negative error code on failure
*/
int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi)
{
ssize_t err;
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_TEAR_OFF, NULL, 0);
if (err < 0)
return err;
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_off);
/**
* mipi_dsi_dcs_set_tear_on() - turn on the display module's Tearing Effect
* output signal on the TE signal line.
* @dsi: DSI peripheral device
* @mode: the Tearing Effect Output Line mode
*
* Return: 0 on success or a negative error code on failure
*/
int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi,
enum mipi_dsi_dcs_tear_mode mode)
{
u8 value = mode;
ssize_t err;
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_TEAR_ON, &value,
sizeof(value));
if (err < 0)
return err;
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_on);
/**
* mipi_dsi_dcs_set_pixel_format() - sets the pixel format for the RGB image
* data used by the interface
* @dsi: DSI peripheral device
* @format: pixel format
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format)
{
ssize_t err;
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_PIXEL_FORMAT, &format,
sizeof(format));
if (err < 0)
return err;
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_set_pixel_format);
/**
* mipi_dsi_dcs_set_tear_scanline() - set the scanline to use as trigger for
* the Tearing Effect output signal of the display module
* @dsi: DSI peripheral device
* @scanline: scanline to use as trigger
*
* Return: 0 on success or a negative error code on failure
*/
int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline)
{
u8 payload[3] = { MIPI_DCS_SET_TEAR_SCANLINE, scanline >> 8,
scanline & 0xff };
ssize_t err;
err = mipi_dsi_generic_write(dsi, payload, sizeof(payload));
if (err < 0)
return err;
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_scanline);
/**
* mipi_dsi_dcs_set_display_brightness() - sets the brightness value of the
* display
* @dsi: DSI peripheral device
* @brightness: brightness value
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_set_display_brightness(struct mipi_dsi_device *dsi,
u16 brightness)
{
u8 payload[2] = { brightness & 0xff, brightness >> 8 };
ssize_t err;
err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
payload, sizeof(payload));
if (err < 0)
return err;
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_set_display_brightness);
/**
* mipi_dsi_dcs_get_display_brightness() - gets the current brightness value
* of the display
* @dsi: DSI peripheral device
* @brightness: brightness value
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_get_display_brightness(struct mipi_dsi_device *dsi,
u16 *brightness)
{
ssize_t err;
err = mipi_dsi_dcs_read(dsi, MIPI_DCS_GET_DISPLAY_BRIGHTNESS,
brightness, sizeof(*brightness));
if (err <= 0) {
if (err == 0)
err = -ENODATA;
return err;
}
return 0;
}
EXPORT_SYMBOL(mipi_dsi_dcs_get_display_brightness);

466
include/mipi_dsi.h Normal file
View File

@ -0,0 +1,466 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* MIPI DSI Bus
*
* Copyright (C) 2012-2013, Samsung Electronics, Co., Ltd.
* Copyright (C) 2018 STMicroelectronics - All Rights Reserved
* Author(s): Andrzej Hajda <a.hajda@samsung.com>
* Yannick Fertre <yannick.fertre@st.com>
* Philippe Cornu <philippe.cornu@st.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef MIPI_DSI_H
#define MIPI_DSI_H
#include <mipi_display.h>
struct mipi_dsi_host;
struct mipi_dsi_device;
/* request ACK from peripheral */
#define MIPI_DSI_MSG_REQ_ACK BIT(0)
/* use Low Power Mode to transmit message */
#define MIPI_DSI_MSG_USE_LPM BIT(1)
/**
* struct mipi_dsi_msg - read/write DSI buffer
* @channel: virtual channel id
* @type: payload data type
* @flags: flags controlling this message transmission
* @tx_len: length of @tx_buf
* @tx_buf: data to be written
* @rx_len: length of @rx_buf
* @rx_buf: data to be read, or NULL
*/
struct mipi_dsi_msg {
u8 channel;
u8 type;
u16 flags;
size_t tx_len;
const void *tx_buf;
size_t rx_len;
void *rx_buf;
};
bool mipi_dsi_packet_format_is_short(u8 type);
bool mipi_dsi_packet_format_is_long(u8 type);
/**
* struct mipi_dsi_packet - represents a MIPI DSI packet in protocol format
* @size: size (in bytes) of the packet
* @header: the four bytes that make up the header (Data ID, Word Count or
* Packet Data, and ECC)
* @payload_length: number of bytes in the payload
* @payload: a pointer to a buffer containing the payload, if any
*/
struct mipi_dsi_packet {
size_t size;
u8 header[4];
size_t payload_length;
const u8 *payload;
};
int mipi_dsi_create_packet(struct mipi_dsi_packet *packet,
const struct mipi_dsi_msg *msg);
/**
* struct mipi_dsi_host_ops - DSI bus operations
* @attach: attach DSI device to DSI host
* @detach: detach DSI device from DSI host
* @transfer: transmit a DSI packet
*
* DSI packets transmitted by .transfer() are passed in as mipi_dsi_msg
* structures. This structure contains information about the type of packet
* being transmitted as well as the transmit and receive buffers. When an
* error is encountered during transmission, this function will return a
* negative error code. On success it shall return the number of bytes
* transmitted for write packets or the number of bytes received for read
* packets.
*
* Note that typically DSI packet transmission is atomic, so the .transfer()
* function will seldomly return anything other than the number of bytes
* contained in the transmit buffer on success.
*/
struct mipi_dsi_host_ops {
int (*attach)(struct mipi_dsi_host *host,
struct mipi_dsi_device *dsi);
int (*detach)(struct mipi_dsi_host *host,
struct mipi_dsi_device *dsi);
ssize_t (*transfer)(struct mipi_dsi_host *host,
const struct mipi_dsi_msg *msg);
};
/**
* struct mipi_dsi_phy_ops - DSI host physical operations
* @init: initialized host physical part
* @get_lane_mbps: get lane bitrate per lane (mbps)
* @post_set_mode: operation that should after set mode
*/
struct mipi_dsi_phy_ops {
int (*init)(void *priv_data);
int (*get_lane_mbps)(void *priv_data, struct display_timing *timings,
u32 lanes, u32 format, unsigned int *lane_mbps);
void (*post_set_mode)(void *priv_data, unsigned long mode_flags);
};
/**
* struct mipi_dsi_host - DSI host device
* @dev: driver model device node for this DSI host
* @ops: DSI host operations
* @list: list management
*/
struct mipi_dsi_host {
struct device *dev;
const struct mipi_dsi_host_ops *ops;
struct list_head list;
};
/* DSI mode flags */
/* video mode */
#define MIPI_DSI_MODE_VIDEO BIT(0)
/* video burst mode */
#define MIPI_DSI_MODE_VIDEO_BURST BIT(1)
/* video pulse mode */
#define MIPI_DSI_MODE_VIDEO_SYNC_PULSE BIT(2)
/* enable auto vertical count mode */
#define MIPI_DSI_MODE_VIDEO_AUTO_VERT BIT(3)
/* enable hsync-end packets in vsync-pulse and v-porch area */
#define MIPI_DSI_MODE_VIDEO_HSE BIT(4)
/* disable hfront-porch area */
#define MIPI_DSI_MODE_VIDEO_HFP BIT(5)
/* disable hback-porch area */
#define MIPI_DSI_MODE_VIDEO_HBP BIT(6)
/* disable hsync-active area */
#define MIPI_DSI_MODE_VIDEO_HSA BIT(7)
/* flush display FIFO on vsync pulse */
#define MIPI_DSI_MODE_VSYNC_FLUSH BIT(8)
/* disable EoT packets in HS mode */
#define MIPI_DSI_MODE_EOT_PACKET BIT(9)
/* device supports non-continuous clock behavior (DSI spec 5.6.1) */
#define MIPI_DSI_CLOCK_NON_CONTINUOUS BIT(10)
/* transmit data in low power */
#define MIPI_DSI_MODE_LPM BIT(11)
enum mipi_dsi_pixel_format {
MIPI_DSI_FMT_RGB888,
MIPI_DSI_FMT_RGB666,
MIPI_DSI_FMT_RGB666_PACKED,
MIPI_DSI_FMT_RGB565,
};
#define DSI_DEV_NAME_SIZE 20
/**
* struct mipi_dsi_device_info - template for creating a mipi_dsi_device
* @type: DSI peripheral chip type
* @channel: DSI virtual channel assigned to peripheral
* @node: pointer to OF device node or NULL
*
* This is populated and passed to mipi_dsi_device_new to create a new
* DSI device
*/
struct mipi_dsi_device_info {
char type[DSI_DEV_NAME_SIZE];
u32 channel;
struct device_node *node;
};
/**
* struct mipi_dsi_device - DSI peripheral device
* @host: DSI host for this peripheral
* @dev: driver model device node for this peripheral
* @name: DSI peripheral chip type
* @channel: virtual channel assigned to the peripheral
* @format: pixel format for video mode
* @lanes: number of active data lanes
* @mode_flags: DSI operation mode related flags
*/
struct mipi_dsi_device {
struct mipi_dsi_host *host;
struct udevice *dev;
char name[DSI_DEV_NAME_SIZE];
unsigned int channel;
unsigned int lanes;
enum mipi_dsi_pixel_format format;
unsigned long mode_flags;
};
/**
* mipi_dsi_pixel_format_to_bpp - obtain the number of bits per pixel for any
* given pixel format defined by the MIPI DSI
* specification
* @fmt: MIPI DSI pixel format
*
* Returns: The number of bits per pixel of the given pixel format.
*/
static inline int mipi_dsi_pixel_format_to_bpp(enum mipi_dsi_pixel_format fmt)
{
switch (fmt) {
case MIPI_DSI_FMT_RGB888:
case MIPI_DSI_FMT_RGB666:
return 24;
case MIPI_DSI_FMT_RGB666_PACKED:
return 18;
case MIPI_DSI_FMT_RGB565:
return 16;
}
return -EINVAL;
}
/**
* struct mipi_dsi_panel_plat - DSI panel platform data
* @device: DSI peripheral device
*/
struct mipi_dsi_panel_plat {
struct mipi_dsi_device *device;
};
/**
* mipi_dsi_attach - attach a DSI device to its DSI host
* @dsi: DSI peripheral
*/
int mipi_dsi_attach(struct mipi_dsi_device *dsi);
/**
* mipi_dsi_detach - detach a DSI device from its DSI host
* @dsi: DSI peripheral
*/
int mipi_dsi_detach(struct mipi_dsi_device *dsi);
int mipi_dsi_shutdown_peripheral(struct mipi_dsi_device *dsi);
int mipi_dsi_turn_on_peripheral(struct mipi_dsi_device *dsi);
int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi,
u16 value);
ssize_t mipi_dsi_generic_write(struct mipi_dsi_device *dsi, const void *payload,
size_t size);
ssize_t mipi_dsi_generic_read(struct mipi_dsi_device *dsi, const void *params,
size_t num_params, void *data, size_t size);
/**
* enum mipi_dsi_dcs_tear_mode - Tearing Effect Output Line mode
* @MIPI_DSI_DCS_TEAR_MODE_VBLANK: the TE output line consists of V-Blanking
* information only
* @MIPI_DSI_DCS_TEAR_MODE_VHBLANK : the TE output line consists of both
* V-Blanking and H-Blanking information
*/
enum mipi_dsi_dcs_tear_mode {
MIPI_DSI_DCS_TEAR_MODE_VBLANK,
MIPI_DSI_DCS_TEAR_MODE_VHBLANK,
};
#define MIPI_DSI_DCS_POWER_MODE_DISPLAY BIT(2)
#define MIPI_DSI_DCS_POWER_MODE_NORMAL BIT(3)
#define MIPI_DSI_DCS_POWER_MODE_SLEEP BIT(4)
#define MIPI_DSI_DCS_POWER_MODE_PARTIAL BIT(5)
#define MIPI_DSI_DCS_POWER_MODE_IDLE BIT(6)
/**
* mipi_dsi_dcs_write_buffer() - transmit a DCS command with payload
* @dsi: DSI peripheral device
* @data: buffer containing data to be transmitted
* @len: size of transmission buffer
*
* This function will automatically choose the right data type depending on
* the command payload length.
*
* Return: The number of bytes successfully transmitted or a negative error
* code on failure.
*/
ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi,
const void *data, size_t len);
/**
* mipi_dsi_dcs_write() - send DCS write command
* @dsi: DSI peripheral device
* @cmd: DCS command
* @data: buffer containing the command payload
* @len: command payload length
*
* This function will automatically choose the right data type depending on
* the command payload length.
* code on failure.
*/
ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd,
const void *data, size_t len);
/**
* mipi_dsi_dcs_read() - send DCS read request command
* @dsi: DSI peripheral device
* @cmd: DCS command
* @data: buffer in which to receive data
* @len: size of receive buffer
*
* Return: The number of bytes read or a negative error code on failure.
*/
ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data,
size_t len);
/**
* mipi_dsi_dcs_nop() - send DCS nop packet
* @dsi: DSI peripheral device
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi);
/**
* mipi_dsi_dcs_soft_reset() - perform a software reset of the display module
* @dsi: DSI peripheral device
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi);
/**
* mipi_dsi_dcs_get_power_mode() - query the display module's current power
* mode
* @dsi: DSI peripheral device
* @mode: return location for the current power mode
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device *dsi, u8 *mode);
/**
* mipi_dsi_dcs_get_pixel_format() - gets the pixel format for the RGB image
* data used by the interface
* @dsi: DSI peripheral device
* @format: return location for the pixel format
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_get_pixel_format(struct mipi_dsi_device *dsi, u8 *format);
/**
* mipi_dsi_dcs_enter_sleep_mode() - disable all unnecessary blocks inside the
* display module except interface communication
* @dsi: DSI peripheral device
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi);
/**
* mipi_dsi_dcs_exit_sleep_mode() - enable all blocks inside the display
* module
* @dsi: DSI peripheral device
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi);
/**
* mipi_dsi_dcs_set_display_off() - stop displaying the image data on the
* display device
* @dsi: DSI peripheral device
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi);
/**
* mipi_dsi_dcs_set_display_on() - start displaying the image data on the
* display device
* @dsi: DSI peripheral device
*
* Return: 0 on success or a negative error code on failure
*/
int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi);
/**
* mipi_dsi_dcs_set_column_address() - define the column extent of the frame
* memory accessed by the host processor
* @dsi: DSI peripheral device
* @start: first column of frame memory
* @end: last column of frame memory
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start,
u16 end);
/**
* mipi_dsi_dcs_set_page_address() - define the page extent of the frame
* memory accessed by the host processor
* @dsi: DSI peripheral device
* @start: first page of frame memory
* @end: last page of frame memory
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start,
u16 end);
/**
* mipi_dsi_dcs_set_tear_off() - turn off the display module's Tearing Effect
* output signal on the TE signal line
* @dsi: DSI peripheral device
*
* Return: 0 on success or a negative error code on failure
*/
int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi);
/**
* mipi_dsi_dcs_set_tear_on() - turn on the display module's Tearing Effect
* output signal on the TE signal line.
* @dsi: DSI peripheral device
* @mode: the Tearing Effect Output Line mode
*
* Return: 0 on success or a negative error code on failure
*/
int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi,
enum mipi_dsi_dcs_tear_mode mode);
/**
* mipi_dsi_dcs_set_pixel_format() - sets the pixel format for the RGB image
* data used by the interface
* @dsi: DSI peripheral device
* @format: pixel format
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format);
/**
* mipi_dsi_dcs_set_tear_scanline() - set the scanline to use as trigger for
* the Tearing Effect output signal of the display module
* @dsi: DSI peripheral device
* @scanline: scanline to use as trigger
*
* Return: 0 on success or a negative error code on failure
*/
int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline);
/**
* mipi_dsi_dcs_set_display_brightness() - sets the brightness value of the
* display
* @dsi: DSI peripheral device
* @brightness: brightness value
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_set_display_brightness(struct mipi_dsi_device *dsi,
u16 brightness);
/**
* mipi_dsi_dcs_get_display_brightness() - gets the current brightness value
* of the display
* @dsi: DSI peripheral device
* @brightness: brightness value
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_dcs_get_display_brightness(struct mipi_dsi_device *dsi,
u16 *brightness);
#endif /* MIPI_DSI_H */