mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-28 23:50:26 +09:00
mx6memcal: Fix the UART ports for mx6sabresd/auto boards
mx6sabresd board uses the following pins for console:
PAD_CSI0_DAT10__UART1_TX_DATA
PAD_CSI0_DAT11__UART1_RX_DATA
,so put it in the same config option as wandboard.
mx6sabreauto board uses the following pins for console:
PAD_KEY_COL0__UART4_TX_DATA
PAD_KEY_ROW0__UART4_RX_DATA
So do not mention sabreauto board as part of the UART1_SD3_DAT6_7 option.
The config option for sabreauto can be added later when needed.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
(cherry picked from commit db00e921fd
)
This commit is contained in:
parent
b7ba717de0
commit
86d55cdcdb
@ -45,20 +45,12 @@ choice
|
||||
NXP SABRELite.
|
||||
|
||||
config UART1_CSI0_DAT10_11
|
||||
bool "UART1 on CSI0_DAT10/11 (Wand)"
|
||||
bool "UART1 on CSI0_DAT10/11 (Wand, SabreSD)"
|
||||
depends on SERIAL_CONSOLE_UART1
|
||||
help
|
||||
Choose this configuration if you're using pads
|
||||
CSI0_DAT10 and DAT11 for a console on UART1 as
|
||||
is done on the i.MX6 Wand board.
|
||||
|
||||
config UART1_SD3_DAT6_7
|
||||
bool "UART1 on SD3_DAT6/7 (SabreSD, SabreAuto)"
|
||||
depends on SERIAL_CONSOLE_UART1
|
||||
help
|
||||
Choose this configuration if you're using pads
|
||||
SD3_DAT6 and DAT7 for a console on UART1 as is
|
||||
done on the NXP SABRESD or SABREAUTO designs.
|
||||
is done on the i.MX6 Wand board and i.MX6 SabreSD.
|
||||
|
||||
config UART1_UART1
|
||||
bool "UART1 on UART1 (i.MX6SL EVK, WaRP)"
|
||||
|
Loading…
Reference in New Issue
Block a user