mx6memcal: Fix the UART ports for mx6sabresd/auto boards

mx6sabresd board uses the following pins for console:

PAD_CSI0_DAT10__UART1_TX_DATA
PAD_CSI0_DAT11__UART1_RX_DATA

,so put it in the same config option as wandboard.

mx6sabreauto board uses the following pins for console:

PAD_KEY_COL0__UART4_TX_DATA
PAD_KEY_ROW0__UART4_RX_DATA

So do not mention sabreauto board as part of the UART1_SD3_DAT6_7 option.

The config option for sabreauto can be added later when needed.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
This commit is contained in:
Fabio Estevam 2018-01-03 12:55:34 -02:00 committed by Stefano Babic
parent 64c7abf023
commit db00e921fd

View File

@ -45,20 +45,12 @@ choice
NXP SABRELite.
config UART1_CSI0_DAT10_11
bool "UART1 on CSI0_DAT10/11 (Wand)"
bool "UART1 on CSI0_DAT10/11 (Wand, SabreSD)"
depends on SERIAL_CONSOLE_UART1
help
Choose this configuration if you're using pads
CSI0_DAT10 and DAT11 for a console on UART1 as
is done on the i.MX6 Wand board.
config UART1_SD3_DAT6_7
bool "UART1 on SD3_DAT6/7 (SabreSD, SabreAuto)"
depends on SERIAL_CONSOLE_UART1
help
Choose this configuration if you're using pads
SD3_DAT6 and DAT7 for a console on UART1 as is
done on the NXP SABRESD or SABREAUTO designs.
is done on the i.MX6 Wand board and i.MX6 SabreSD.
config UART1_UART1
bool "UART1 on UART1 (i.MX6SL EVK, WaRP)"