Convert CONFIG_SUPPORT_EMMC_BOOT to Kconfig

This converts the following to Kconfig: CONFIG_SUPPORT_EMMC_BOOT As requested by Michal Simek <michal.simek@xilinx.com>, these boards have no eMMC so CONFIG_SUPPORT_EMMC_BOOT has not been migrated: xilinx_zynqmp_zc1275_revB xilinx_zynqmp_zc1751_xm018_dc4 xilinx_zynqmp_zc1751_xm019_dc5 xilinx_zynqmp_zcu100_revC xilinx_zynqmp_zcu102_rev1_0 xilinx_zynqmp_zcu102_revA xilinx_zynqmp_zcu102_revB xilinx_zynqmp_zcu104_revA xilinx_zynqmp_zcu104_revC xilinx_zynqmp_zcu106_revA xilinx_zynqmp_zcu111_revA Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Acked-by: Lukasz Majewski <lukma@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Ramon Fried <ramon.fried@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2024-06-09 23:36:03 +09:00 · 2019-05-01 07:58:27 +00:00 · 2019-05-01 07:58:27 +00:00 · 623de3f086
commit 623de3f086
parent cef443c166
113 changed files with 75 additions and 82 deletions
--- a/3
+++ b/3
@ -1120,9 +1120,6 @@ The following options need to be configured:
 			CONFIG_SH_MMCIF_CLK
 			Define the clock frequency for MMCIF

-		CONFIG_SUPPORT_EMMC_BOOT
-		Enable some additional features of the eMMC boot partitions.
-
 - USB Device Firmware Update (DFU) class support:
 		CONFIG_DFU_OVER_USB
 		This enables the USB portion of the DFU USB class
--- a/configs/am57xx_evm_defconfig
+++ b/configs/am57xx_evm_defconfig
@ -59,6 +59,7 @@ CONFIG_DM_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_MISC=y
 CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
--- a/configs/am57xx_hs_evm_defconfig
+++ b/configs/am57xx_hs_evm_defconfig
@ -57,6 +57,7 @@ CONFIG_DM_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_MISC=y
 CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
--- a/configs/am57xx_hs_evm_usb_defconfig
+++ b/configs/am57xx_hs_evm_usb_defconfig
@ -63,6 +63,7 @@ CONFIG_DM_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_MISC=y
 CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
--- a/configs/apalis-tk1_defconfig
+++ b/configs/apalis-tk1_defconfig
@ -34,6 +34,7 @@ CONFIG_SPL_DM=y
 CONFIG_DFU_MMC=y
 CONFIG_DFU_RAM=y
 CONFIG_SYS_I2C_TEGRA=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_TEGRA124_MMC_DISABLE_EXT_LOOPBACK=y
 CONFIG_E1000=y
 CONFIG_PCI=y
--- a/configs/apalis_imx6_defconfig
+++ b/configs/apalis_imx6_defconfig
@ -58,6 +58,7 @@ CONFIG_DFU_MMC=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_MICREL=y
--- a/configs/arndale_defconfig
+++ b/configs/arndale_defconfig
@ -26,6 +26,7 @@ CONFIG_CMD_EXT4_WRITE=y
 CONFIG_DEFAULT_DEVICE_TREE="exynos5250-arndale"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_DM_I2C_COMPAT=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_S5P=y
--- a/configs/avnet_ultra96_rev1_defconfig
+++ b/configs/avnet_ultra96_rev1_defconfig
@ -56,6 +56,7 @@ CONFIG_I2C_MUX_PCA954x=y
 CONFIG_LED=y
 CONFIG_LED_GPIO=y
 CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
 CONFIG_SPI_FLASH=y
--- a/configs/cl-som-imx7_defconfig
+++ b/configs/cl-som-imx7_defconfig
@ -50,6 +50,7 @@ CONFIG_DEFAULT_DEVICE_TREE="imx7d-sdb"
 # CONFIG_ENV_IS_IN_MMC is not set
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_SPI_FLASH=y
 CONFIG_SF_DEFAULT_MODE=0
--- a/configs/clearfog_defconfig
+++ b/configs/clearfog_defconfig
@ -45,6 +45,7 @@ CONFIG_DM_GPIO=y
 CONFIG_DM_PCA953X=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_MVTWSI=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_MV=y
--- a/configs/cm_t54_defconfig
+++ b/configs/cm_t54_defconfig
@ -32,6 +32,7 @@ CONFIG_CMD_EXT4_WRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_SCSI_AHCI=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_SCSI=y
 CONFIG_CONS_INDEX=4
--- a/configs/colibri_imx6_defconfig
+++ b/configs/colibri_imx6_defconfig
@ -57,6 +57,7 @@ CONFIG_DFU_MMC=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_MICREL=y
--- a/configs/colibri_imx7_emmc_defconfig
+++ b/configs/colibri_imx7_emmc_defconfig
@ -45,6 +45,7 @@ CONFIG_DFU_MMC=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_MICREL=y
--- a/configs/display5_defconfig
+++ b/configs/display5_defconfig
@ -63,6 +63,7 @@ CONFIG_BOOTCOUNT_LIMIT=y
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
 CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
 CONFIG_SYS_BOOTCOUNT_ADDR=0x020CC068
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD_DEVICE=y
 CONFIG_SPI_FLASH=y
--- a/configs/display5_factory_defconfig
+++ b/configs/display5_factory_defconfig
@ -64,6 +64,7 @@ CONFIG_PARTITION_TYPE_GUID=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_DFU_MMC=y
 CONFIG_DFU_SF=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD_DEVICE=y
 CONFIG_SPI_FLASH=y
--- a/configs/dms-ba16-1g_defconfig
+++ b/configs/dms-ba16-1g_defconfig
@ -32,6 +32,7 @@ CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_DWC_AHSATA=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_SPI_FLASH=y
 CONFIG_SF_DEFAULT_MODE=0
--- a/configs/dms-ba16_defconfig
+++ b/configs/dms-ba16_defconfig
@ -31,6 +31,7 @@ CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_DWC_AHSATA=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_SPI_FLASH=y
 CONFIG_SF_DEFAULT_MODE=0
--- a/configs/dra7xx_evm_defconfig
+++ b/configs/dra7xx_evm_defconfig
@ -65,6 +65,7 @@ CONFIG_PCF8575_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_MISC=y
 CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS200_SUPPORT=y
--- a/configs/dra7xx_hs_evm_defconfig
+++ b/configs/dra7xx_hs_evm_defconfig
@ -68,6 +68,7 @@ CONFIG_PCF8575_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_MISC=y
 CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS200_SUPPORT=y
--- a/configs/dra7xx_hs_evm_usb_defconfig
+++ b/configs/dra7xx_hs_evm_usb_defconfig
@ -70,6 +70,7 @@ CONFIG_PCF8575_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_MISC=y
 CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS200_SUPPORT=y
--- a/configs/edison_defconfig
+++ b/configs/edison_defconfig
@ -30,6 +30,7 @@ CONFIG_ENV_IS_IN_MMC=y
 CONFIG_CPU=y
 CONFIG_DFU_MMC=y
 CONFIG_DFU_RAM=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_RTC_MC146818=y
 CONFIG_USB_DWC3_GADGET=y
--- a/configs/ge_bx50v3_defconfig
+++ b/configs/ge_bx50v3_defconfig
@ -42,6 +42,7 @@ CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="1:5"
 CONFIG_SYS_BOOTCOUNT_ADDR=0x7000A000
 CONFIG_DM_GPIO=y
 CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
--- a/configs/gwventana_emmc_defconfig
+++ b/configs/gwventana_emmc_defconfig
@ -62,6 +62,7 @@ CONFIG_ENV_IS_IN_MMC=y
 CONFIG_DM=y
 CONFIG_DWC_AHSATA=y
 CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD_DEVICE=y
 CONFIG_PHYLIB=y
--- a/configs/gwventana_gw5904_defconfig
+++ b/configs/gwventana_gw5904_defconfig
@ -62,6 +62,7 @@ CONFIG_ENV_IS_IN_MMC=y
 CONFIG_DM=y
 CONFIG_DWC_AHSATA=y
 CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD_DEVICE=y
 CONFIG_PHYLIB=y
--- a/configs/gwventana_nand_defconfig
+++ b/configs/gwventana_nand_defconfig
@ -64,6 +64,7 @@ CONFIG_ENV_IS_IN_NAND=y
 CONFIG_DM=y
 CONFIG_DWC_AHSATA=y
 CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_NAND=y
 CONFIG_NAND_MXS=y
--- a/configs/imx6dl_mamoj_defconfig
+++ b/configs/imx6dl_mamoj_defconfig
@ -32,6 +32,7 @@ CONFIG_FASTBOOT_BUF_SIZE=0x10000000
 CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=2
 CONFIG_SYS_I2C_MXC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_MICREL=y
--- a/configs/imx8mq_evk_defconfig
+++ b/configs/imx8mq_evk_defconfig
@ -29,6 +29,7 @@ CONFIG_DM_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_MXC=y
 CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_DM_ETH=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX8M=y
--- a/configs/imx8qxp_mek_defconfig
+++ b/configs/imx8qxp_mek_defconfig
@ -53,6 +53,7 @@ CONFIG_I2C_MUX=y
 CONFIG_I2C_MUX_PCA954x=y
 CONFIG_MISC=y
 CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_ADDR_ENABLE=y
 CONFIG_PHY_ATHEROS=y
--- a/configs/liteboard_defconfig
+++ b/configs/liteboard_defconfig
@ -38,6 +38,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_PHYLIB=y
 CONFIG_DM_ETH=y
--- a/configs/mt7623n_bpir2_defconfig
+++ b/configs/mt7623n_bpir2_defconfig
@ -35,6 +35,7 @@ CONFIG_SYSCON=y
 CONFIG_CLK=y
 CONFIG_DM_MMC=y
 # CONFIG_MMC_QUIRKS is not set
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_HS400_SUPPORT=y
 CONFIG_MMC_MTK=y
 CONFIG_PHY_FIXED=y
--- a/configs/mx6sabresd_defconfig
+++ b/configs/mx6sabresd_defconfig
@ -73,6 +73,7 @@ CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=2
 CONFIG_DM_GPIO=y
 CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
--- a/configs/mx7dsabresd_defconfig
+++ b/configs/mx7dsabresd_defconfig
@ -44,6 +44,7 @@ CONFIG_DM_GPIO=y
 CONFIG_DM_74X164=y
 CONFIG_DM_I2C=y
 CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS200_SUPPORT=y
--- a/configs/mx7dsabresd_qspi_defconfig
+++ b/configs/mx7dsabresd_qspi_defconfig
@ -44,6 +44,7 @@ CONFIG_DM_GPIO=y
 CONFIG_DM_74X164=y
 CONFIG_DM_I2C=y
 CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS200_SUPPORT=y
--- a/configs/mx7ulp_evk_defconfig
+++ b/configs/mx7ulp_evk_defconfig
@ -21,6 +21,7 @@ CONFIG_IMX_RGPIO2P=y
 # CONFIG_MXC_GPIO is not set
 CONFIG_DM_I2C=y
 CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX7ULP=y
--- a/configs/mx7ulp_evk_plugin_defconfig
+++ b/configs/mx7ulp_evk_plugin_defconfig
@ -20,6 +20,7 @@ CONFIG_IMX_RGPIO2P=y
 # CONFIG_MXC_GPIO is not set
 CONFIG_DM_I2C=y
 CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX7ULP=y
--- a/configs/odroid-xu3_defconfig
+++ b/configs/odroid-xu3_defconfig
@ -34,6 +34,7 @@ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_ADC=y
 CONFIG_ADC_EXYNOS=y
 CONFIG_DFU_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_DW=y
 CONFIG_SMC911X=y
 CONFIG_SMC911X_BASE=0x5000000
--- a/configs/omap5_uevm_defconfig
+++ b/configs/omap5_uevm_defconfig
@ -30,6 +30,7 @@ CONFIG_SCSI_AHCI=y
 CONFIG_DFU_MMC=y
 CONFIG_DFU_RAM=y
 CONFIG_CMD_TCA642X=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_SCSI=y
 CONFIG_CONS_INDEX=3
--- a/configs/opos6uldev_defconfig
+++ b/configs/opos6uldev_defconfig
@ -68,6 +68,7 @@ CONFIG_SYSCON=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_MXC=y
 CONFIG_PWRSEQ=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_MICREL=y
--- a/configs/peach-pi_defconfig
+++ b/configs/peach-pi_defconfig
@ -38,6 +38,7 @@ CONFIG_I2C_ARB_GPIO_CHALLENGE=y
 CONFIG_CROS_EC_KEYB=y
 CONFIG_CROS_EC=y
 CONFIG_CROS_EC_SPI=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_S5P=y
--- a/configs/peach-pit_defconfig
+++ b/configs/peach-pit_defconfig
@ -37,6 +37,7 @@ CONFIG_I2C_ARB_GPIO_CHALLENGE=y
 CONFIG_CROS_EC_KEYB=y
 CONFIG_CROS_EC=y
 CONFIG_CROS_EC_SPI=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_S5P=y
--- a/configs/pico-hobbit-imx6ul_defconfig
+++ b/configs/pico-hobbit-imx6ul_defconfig
@ -45,6 +45,7 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_MICREL=y
--- a/configs/pico-hobbit-imx7d_defconfig
+++ b/configs/pico-hobbit-imx7d_defconfig
@ -53,6 +53,7 @@ CONFIG_FASTBOOT_BUF_SIZE=0x10000000
 CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=0
 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_PHYLIB=y
 CONFIG_MII=y
--- a/configs/pico-imx6ul_defconfig
+++ b/configs/pico-imx6ul_defconfig
@ -47,6 +47,7 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_MICREL=y
--- a/configs/pico-imx7d_defconfig
+++ b/configs/pico-imx7d_defconfig
@ -53,6 +53,7 @@ CONFIG_FASTBOOT_BUF_SIZE=0x10000000
 CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=0
 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_PHYLIB=y
 CONFIG_MII=y
--- a/configs/pico-pi-imx6ul_defconfig
+++ b/configs/pico-pi-imx6ul_defconfig
@ -45,6 +45,7 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_MICREL=y
--- a/configs/pico-pi-imx7d_defconfig
+++ b/configs/pico-pi-imx7d_defconfig
@ -53,6 +53,7 @@ CONFIG_FASTBOOT_BUF_SIZE=0x10000000
 CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=0
 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_PHYLIB=y
 CONFIG_MII=y
--- a/configs/riotboard_defconfig
+++ b/configs/riotboard_defconfig
@ -21,6 +21,7 @@ CONFIG_CMD_CACHE=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_DM=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_SPI_FLASH=y
 CONFIG_SF_DEFAULT_MODE=0
--- a/configs/riotboard_spl_defconfig
+++ b/configs/riotboard_spl_defconfig
@ -31,6 +31,7 @@ CONFIG_CMD_CACHE=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_DM=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_SPI_FLASH=y
 CONFIG_SF_DEFAULT_MODE=0
--- a/configs/smdk5250_defconfig
+++ b/configs/smdk5250_defconfig
@ -33,6 +33,7 @@ CONFIG_DEFAULT_DEVICE_TREE="exynos5250-smdk5250"
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_USE_ENV_SPI_BUS=y
 CONFIG_ENV_SPI_BUS=1
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_S5P=y
--- a/configs/smdk5420_defconfig
+++ b/configs/smdk5420_defconfig
@ -28,6 +28,7 @@ CONFIG_DEFAULT_DEVICE_TREE="exynos5420-smdk5420"
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_USE_ENV_SPI_BUS=y
 CONFIG_ENV_SPI_BUS=1
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_S5P=y
--- a/configs/snow_defconfig
+++ b/configs/snow_defconfig
@ -43,6 +43,7 @@ CONFIG_I2C_ARB_GPIO_CHALLENGE=y
 CONFIG_CROS_EC_KEYB=y
 CONFIG_CROS_EC=y
 CONFIG_CROS_EC_I2C=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_S5P=y
--- a/configs/spring_defconfig
+++ b/configs/spring_defconfig
@ -43,6 +43,7 @@ CONFIG_I2C_ARB_GPIO_CHALLENGE=y
 CONFIG_CROS_EC_KEYB=y
 CONFIG_CROS_EC=y
 CONFIG_CROS_EC_I2C=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_S5P=y
--- a/configs/stm32mp15_basic_defconfig
+++ b/configs/stm32mp15_basic_defconfig
@ -53,6 +53,7 @@ CONFIG_SYS_I2C_STM32F7=y
 CONFIG_LED=y
 CONFIG_LED_GPIO=y
 CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_STM32_SDMMC2=y
 CONFIG_PHY=y
 CONFIG_PHY_STM32_USBPHYC=y
--- a/configs/stm32mp15_trusted_defconfig
+++ b/configs/stm32mp15_trusted_defconfig
@ -45,6 +45,7 @@ CONFIG_SYS_I2C_STM32F7=y
 CONFIG_LED=y
 CONFIG_LED_GPIO=y
 CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_STM32_SDMMC2=y
 CONFIG_PHY=y
 CONFIG_PHY_STM32_USBPHYC=y
--- a/configs/uniphier_ld4_sld8_defconfig
+++ b/configs/uniphier_ld4_sld8_defconfig
@ -40,6 +40,7 @@ CONFIG_GPIO_UNIPHIER=y
 CONFIG_MISC=y
 CONFIG_I2C_EEPROM=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_UNIPHIER=y
 CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_SYS_FLASH_CFI=y
--- a/configs/uniphier_v7_defconfig
+++ b/configs/uniphier_v7_defconfig
@ -39,6 +39,7 @@ CONFIG_GPIO_UNIPHIER=y
 CONFIG_MISC=y
 CONFIG_I2C_EEPROM=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_UNIPHIER=y
 CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_SYS_FLASH_CFI=y
--- a/configs/uniphier_v8_defconfig
+++ b/configs/uniphier_v8_defconfig
@ -34,6 +34,7 @@ CONFIG_MISC=y
 CONFIG_I2C_EEPROM=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
 CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_MMC_UNIPHIER=y
 CONFIG_MMC_SDHCI=y
--- a/configs/vinco_defconfig
+++ b/configs/vinco_defconfig
@ -27,6 +27,7 @@ CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="at91-vinco"
 CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_SPI_FLASH=y
 CONFIG_SF_DEFAULT_MODE=0
 CONFIG_SF_DEFAULT_SPEED=50000000
--- a/configs/vining_2000_defconfig
+++ b/configs/vining_2000_defconfig
@ -33,6 +33,7 @@ CONFIG_CMD_FS_GENERIC=y
 CONFIG_EFI_PARTITION=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_PHYLIB=y
 CONFIG_MII=y
--- a/configs/warp7_bl33_defconfig
+++ b/configs/warp7_bl33_defconfig
@ -29,6 +29,7 @@ CONFIG_DFU_MMC=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX7=y
--- a/configs/warp7_defconfig
+++ b/configs/warp7_defconfig
@ -38,6 +38,7 @@ CONFIG_DFU_MMC=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX7=y
--- a/configs/warp_defconfig
+++ b/configs/warp_defconfig
@ -29,6 +29,7 @@ CONFIG_CMD_FS_GENERIC=y
 CONFIG_ENV_IS_IN_MMC=y
 # CONFIG_NET is not set
 CONFIG_DFU_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
--- a/configs/xilinx_zynqmp_mini_emmc0_defconfig
+++ b/configs/xilinx_zynqmp_mini_emmc0_defconfig
@ -53,6 +53,7 @@ CONFIG_SPL_DM=y
 # CONFIG_DM_WARN is not set
 # CONFIG_DM_DEVICE_REMOVE is not set
 CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
 # CONFIG_EFI_LOADER is not set
--- a/configs/xilinx_zynqmp_mini_emmc1_defconfig
+++ b/configs/xilinx_zynqmp_mini_emmc1_defconfig
@ -53,6 +53,7 @@ CONFIG_SPL_DM=y
 # CONFIG_DM_WARN is not set
 # CONFIG_DM_DEVICE_REMOVE is not set
 CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
 # CONFIG_EFI_LOADER is not set
--- a/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig
+++ b/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig
@ -58,6 +58,7 @@ CONFIG_DM_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_CADENCE=y
 CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
--- a/configs/xilinx_zynqmp_zc1751_xm017_dc3_defconfig
+++ b/configs/xilinx_zynqmp_zc1751_xm017_dc3_defconfig
@ -50,6 +50,7 @@ CONFIG_DM_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_CADENCE=y
 CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
 CONFIG_MTD_DEVICE=y
--- a/configs/xpress_defconfig
+++ b/configs/xpress_defconfig
@ -25,6 +25,7 @@ CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_PHYLIB=y
 CONFIG_MII=y
--- a/configs/xpress_spl_defconfig
+++ b/configs/xpress_spl_defconfig
@ -36,6 +36,7 @@ CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_PHYLIB=y
 CONFIG_MII=y
--- a/configs/zc5202_defconfig
+++ b/configs/zc5202_defconfig
@ -34,6 +34,7 @@ CONFIG_CMD_CACHE=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_SPI_FLASH=y
 CONFIG_SF_DEFAULT_BUS=3
--- a/configs/zc5601_defconfig
+++ b/configs/zc5601_defconfig
@ -33,6 +33,7 @@ CONFIG_CMD_CACHE=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_SPI_FLASH=y
 CONFIG_SF_DEFAULT_BUS=3
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@ -78,6 +78,12 @@ config SUPPORT_EMMC_RPMB
 	  Enable support for reading, writing and programming the
 	  key for the Replay Protection Memory Block partition in eMMC.

+config SUPPORT_EMMC_BOOT
+	bool "Support some additional features of the eMMC boot partitions"
+	help
+	  Enable support for eMMC boot partitions. This also enables
+	  extensions within the mmc command.
+
 config MMC_IO_VOLTAGE
 	bool "Support IO voltage configuration"
 	help
--- a/include/configs/advantech_dms-ba16.h
+++ b/include/configs/advantech_dms-ba16.h
@ -21,8 +21,6 @@
 #define CONFIG_LOADCMD "fatload"
 #define CONFIG_RFSPART "2"

-#define CONFIG_SUPPORT_EMMC_BOOT
-
 #include "mx6_common.h"
 #include <linux/sizes.h>

--- a/include/configs/am57xx_evm.h
+++ b/include/configs/am57xx_evm.h
@ -63,8 +63,6 @@
 #define CONFIG_NET_RETRY_COUNT		10
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs longer aneg time at 1G */

-#define CONFIG_SUPPORT_EMMC_BOOT
-
 /* USB xHCI HOST */
 #define CONFIG_USB_XHCI_OMAP

--- a/include/configs/apalis-tk1.h
+++ b/include/configs/apalis-tk1.h
@ -18,9 +18,6 @@
 #define CONFIG_TEGRA_ENABLE_UARTA
 #define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTA_BASE

-/* SD/MMC support */
-#define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
-
 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
 #define CONFIG_ENV_OFFSET		(-CONFIG_ENV_SIZE + \
 					 CONFIG_TDX_CFG_BLOCK_OFFSET)
--- a/include/configs/apalis_imx6.h
+++ b/include/configs/apalis_imx6.h
@ -46,8 +46,6 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_USDHC_NUM	3

-#define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
-
 /*
 * SATA Configs
 */
--- a/include/configs/arndale.h
+++ b/include/configs/arndale.h
@ -14,9 +14,6 @@
 #include "exynos5250-common.h"
 #include <configs/exynos5-common.h>

-/* SD/MMC configuration */
-#define CONFIG_SUPPORT_EMMC_BOOT
-
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE

--- a/include/configs/brppt1.h
+++ b/include/configs/brppt1.h
@ -31,11 +31,6 @@
 /*#define CONFIG_MACH_TYPE		3589*/
 #define CONFIG_MACH_TYPE		0xFFFFFFFF /* TODO: check with kernel*/

-/* MMC/SD IP block */
-#if defined(CONFIG_EMMC_BOOT)
- #define CONFIG_SUPPORT_EMMC_BOOT
-#endif /* CONFIG_EMMC_BOOT */
-
 /*
 * When we have NAND flash we expect to be making use of mtdparts,
 * both for ease of use in U-Boot and for passing information on to
--- a/include/configs/cl-som-imx7.h
+++ b/include/configs/cl-som-imx7.h
@ -153,7 +153,6 @@

 #define CONFIG_SYS_FSL_USDHC_NUM	2
 #define CONFIG_MMCROOT			"/dev/mmcblk0p2" /* USDHC1 */
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
 #endif

 /* USB Configs */
--- a/include/configs/clearfog.h
+++ b/include/configs/clearfog.h
@ -26,10 +26,6 @@
 */
 #define CONFIG_SYS_MMC_BASE		MVEBU_SDIO_BASE

-#ifdef CONFIG_CMD_MMC
-#define CONFIG_SUPPORT_EMMC_BOOT
-#endif
-
 /* USB/EHCI configuration */
 #define CONFIG_EHCI_IS_TDI

--- a/include/configs/cm_t54.h
+++ b/include/configs/cm_t54.h
@ -41,7 +41,6 @@

 /* Enhance our eMMC support / experience. */
 #define CONFIG_HSMMC2_8BIT
-#define CONFIG_SUPPORT_EMMC_BOOT

 /* SATA Boot related defines */
 #define CONFIG_SPL_SATA_BOOT_DEVICE		0
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@ -44,8 +44,6 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_USDHC_NUM	2

-#define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
-
 /* Network */
 #define CONFIG_FEC_MXC
 #define IMX_FEC_BASE			ENET_BASE_ADDR
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@ -35,8 +35,6 @@
 #define CONFIG_SYS_FSL_USDHC_NUM	1
 #elif CONFIG_TARGET_COLIBRI_IMX7_EMMC
 #define CONFIG_SYS_FSL_USDHC_NUM	2
-
-#define CONFIG_SUPPORT_EMMC_BOOT
 #endif

 #undef CONFIG_BOOTM_PLAN9
--- a/include/configs/display5.h
+++ b/include/configs/display5.h
@ -83,7 +83,6 @@
 #define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_USDHC_NUM	2
-#define CONFIG_SUPPORT_EMMC_BOOT

 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@ -96,8 +96,6 @@
 /* SPI SPL */
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x40000

-#define CONFIG_SUPPORT_EMMC_BOOT
-
 /* USB xHCI HOST */
 #define CONFIG_USB_XHCI_OMAP

--- a/include/configs/dragonboard410c.h
+++ b/include/configs/dragonboard410c.h
@ -31,13 +31,6 @@
 * it has to be done after each HCD reset */
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET

-/* Support all possible USB ethernet dongles */
-
-/* Extra Commands */
-/* Enable that for switching of boot partitions */
-/* Disabled by default as some sub-commands can brick eMMC */
-/*#define CONFIG_SUPPORT_EMMC_BOOT */
-
 /* BOOTP options */
 #define CONFIG_BOOTP_BOOTFILESIZE

--- a/include/configs/edison.h
+++ b/include/configs/edison.h
@ -34,7 +34,6 @@
 #define CONFIG_ENV_SIZE				(64 * 1024)
 #define CONFIG_ENV_OFFSET			(3 * 1024 * 1024)
 #define CONFIG_ENV_OFFSET_REDUND		(6 * 1024 * 1024)
-#define CONFIG_SUPPORT_EMMC_BOOT

 /* RTC */
 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS	0
--- a/include/configs/embestmx6boards.h
+++ b/include/configs/embestmx6boards.h
@ -76,7 +76,6 @@
 #define CONFIG_SYS_FSL_USDHC_NUM	3
 #define CONFIG_SYS_MMC_ENV_DEV		2	/* SDHC4 */
 #define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 /* MarSBoard */
 #define CONFIG_FDTFILE	"imx6q-marsboard.dtb"
--- a/include/configs/exynos5-common.h
+++ b/include/configs/exynos5-common.h
@ -44,7 +44,6 @@

 /* MMC SPL */
 #define COPY_BL2_FNPTR_ADDR	0x02020030
-#define CONFIG_SUPPORT_EMMC_BOOT

 /* specific .lds file */

--- a/include/configs/ge_bx50v3.h
+++ b/include/configs/ge_bx50v3.h
@ -19,9 +19,6 @@
 #define CONFIG_MXC_UART_BASE	UART3_BASE
 #define CONSOLE_DEV	"ttymxc2"

-#define CONFIG_SUPPORT_EMMC_BOOT
-
-
 #include "mx6_common.h"
 #include <linux/sizes.h>

--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@ -81,9 +81,6 @@
 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0

-/* eMMC Configs */
-#define CONFIG_SUPPORT_EMMC_BOOT
-
 /*
 * SATA Configs
 */
--- a/include/configs/imx6dl-mamoj.h
+++ b/include/configs/imx6dl-mamoj.h
@ -51,7 +51,6 @@

 /* MMC */
 #define CONFIG_SYS_MMC_ENV_DEV		2
-#define CONFIG_SUPPORT_EMMC_BOOT

 /* Ethernet */
 #define CONFIG_FEC_MXC_PHYADDR		1
--- a/include/configs/imx8mq_evk.h
+++ b/include/configs/imx8mq_evk.h
@ -224,7 +224,6 @@
 #define CONFIG_SYS_FSL_USDHC_NUM	2
 #define CONFIG_SYS_FSL_ESDHC_ADDR       0

-#define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
 #define CONFIG_SYS_MMC_IMG_LOAD_PART	1

 #define CONFIG_MXC_GPIO
--- a/include/configs/imx8qxp_mek.h
+++ b/include/configs/imx8qxp_mek.h
@ -53,7 +53,6 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 #define USDHC1_BASE_ADDR                0x5B010000
 #define USDHC2_BASE_ADDR                0x5B020000
-#define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */

 #define CONFIG_ENV_OVERWRITE

--- a/include/configs/liteboard.h
+++ b/include/configs/liteboard.h
@ -24,7 +24,6 @@
 /* MMC Configs */
 #ifdef CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC1_BASE_ADDR
-#define CONFIG_SUPPORT_EMMC_BOOT
 #endif

 #define CONFIG_SYS_MMC_IMG_LOAD_PART	1
--- a/include/configs/mt7623.h
+++ b/include/configs/mt7623.h
@ -42,7 +42,6 @@

 /* MMC */
 #define MMC_SUPPORTS_TUNING
-#define CONFIG_SUPPORT_EMMC_BOOT

 /* DRAM */
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
--- a/include/configs/mx6sabresd.h
+++ b/include/configs/mx6sabresd.h
@ -16,8 +16,6 @@
 #define CONFIG_MXC_UART_BASE	UART1_BASE
 #define CONSOLE_DEV		"ttymxc0"

-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
-
 #include "mx6sabre_common.h"

 /* Falcon Mode */
--- a/include/configs/mx7dsabresd.h
+++ b/include/configs/mx7dsabresd.h
@ -38,7 +38,6 @@
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_SPEED		100000

-#define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
 #define CONFIG_SYS_MMC_IMG_LOAD_PART	1

 #ifdef CONFIG_IMX_BOOTAUX
--- a/include/configs/mx7ulp_evk.h
+++ b/include/configs/mx7ulp_evk.h
@ -28,7 +28,6 @@
 #define IOMUXC_BASE_ADDR		IOMUXC1_RBASE

 #define CONFIG_FSL_USDHC
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */

 #define CONFIG_SYS_FSL_USDHC_NUM        1

--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@ -39,7 +39,6 @@

 /* Enhance our eMMC support / experience. */
 #define CONFIG_HSMMC2_8BIT
-#define CONFIG_SUPPORT_EMMC_BOOT

 /* Required support for the TCA642X GPIO we have on the uEVM */
 #define CONFIG_TCA642X
--- a/include/configs/opos6uldev.h
+++ b/include/configs/opos6uldev.h
@ -33,9 +33,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

-/* MMC */
-#define CONFIG_SUPPORT_EMMC_BOOT
-
 /* USB */
 #ifdef CONFIG_USB_EHCI_MX6
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
--- a/Show More
+++ b/Show More