2021-03-27 20:37:04 +09:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
|
|
|
/*
|
|
|
|
|
* Copyright (C) 2013 Regents of the University of California
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include <linux/linkage.h>
|
|
|
|
|
#include <asm/asm.h>
|
|
|
|
|
|
|
|
|
|
/* void *memcpy(void *, const void *, size_t) */
|
|
|
|
|
ENTRY(__memcpy)
|
|
|
|
|
WEAK(memcpy)
|
riscv: Fix memmove and optimise memcpy when misalign
At present U-Boot SPL fails to boot on SiFive Unleashed board, due
to a load address misaligned exception happens when loading the FIT
image in spl_load_simple_fit(). The exception happens in memmove()
which is called by fdt_splice_().
Commit 8f0dc4cfd106 introduces an assembly version of memmove but
it does take misalignment into account (it checks if length is a
multiple of machine word size but pointers need also be aligned).
As a result it will generate misaligned load/store for the majority
of cases and causes significant performance regression on hardware
that traps misaligned load/store and emulate them using firmware.
The current behaviour of memcpy is that it checks if both src and
dest pointers are co-aligned (aka congruent modular SZ_REG). If
aligned, it will copy data word-by-word after first aligning
pointers to word boundary. If src and dst are not co-aligned,
however, byte-wise copy will be performed.
This patch was taken from the Linux kernel patch [1], which has not
been applied at the time being. It fixes the memmove and optimises
memcpy for misaligned cases. It will first align destination pointer
to word-boundary regardless whether src and dest are co-aligned or
not. If they indeed are, then wordwise copy is performed. If they
are not co-aligned, then it will load two adjacent words from src
and use shifts to assemble a full machine word. Some additional
assembly level micro-optimisation is also performed to ensure more
instructions can be compressed (e.g. prefer a0 to t6).
With this patch, U-Boot boots again on SiFive Unleashed board.
[1] https://patchwork.kernel.org/project/linux-riscv/patch/20210216225555.4976-1-gary@garyguo.net/
Fixes: 8f0dc4cfd106 ("riscv: assembler versions of memcpy, memmove, memset")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-13 17:46:17 +09:00
|
|
|
/* Save for return value */
|
|
|
|
|
mv t6, a0
|
2021-03-27 20:37:04 +09:00
|
|
|
|
riscv: Fix memmove and optimise memcpy when misalign
At present U-Boot SPL fails to boot on SiFive Unleashed board, due
to a load address misaligned exception happens when loading the FIT
image in spl_load_simple_fit(). The exception happens in memmove()
which is called by fdt_splice_().
Commit 8f0dc4cfd106 introduces an assembly version of memmove but
it does take misalignment into account (it checks if length is a
multiple of machine word size but pointers need also be aligned).
As a result it will generate misaligned load/store for the majority
of cases and causes significant performance regression on hardware
that traps misaligned load/store and emulate them using firmware.
The current behaviour of memcpy is that it checks if both src and
dest pointers are co-aligned (aka congruent modular SZ_REG). If
aligned, it will copy data word-by-word after first aligning
pointers to word boundary. If src and dst are not co-aligned,
however, byte-wise copy will be performed.
This patch was taken from the Linux kernel patch [1], which has not
been applied at the time being. It fixes the memmove and optimises
memcpy for misaligned cases. It will first align destination pointer
to word-boundary regardless whether src and dest are co-aligned or
not. If they indeed are, then wordwise copy is performed. If they
are not co-aligned, then it will load two adjacent words from src
and use shifts to assemble a full machine word. Some additional
assembly level micro-optimisation is also performed to ensure more
instructions can be compressed (e.g. prefer a0 to t6).
With this patch, U-Boot boots again on SiFive Unleashed board.
[1] https://patchwork.kernel.org/project/linux-riscv/patch/20210216225555.4976-1-gary@garyguo.net/
Fixes: 8f0dc4cfd106 ("riscv: assembler versions of memcpy, memmove, memset")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-13 17:46:17 +09:00
|
|
|
/*
|
|
|
|
|
* Register allocation for code below:
|
|
|
|
|
* a0 - start of uncopied dst
|
|
|
|
|
* a1 - start of uncopied src
|
|
|
|
|
* t0 - end of uncopied dst
|
|
|
|
|
*/
|
|
|
|
|
add t0, a0, a2
|
2021-03-27 20:37:04 +09:00
|
|
|
|
|
|
|
|
/*
|
riscv: Fix memmove and optimise memcpy when misalign
At present U-Boot SPL fails to boot on SiFive Unleashed board, due
to a load address misaligned exception happens when loading the FIT
image in spl_load_simple_fit(). The exception happens in memmove()
which is called by fdt_splice_().
Commit 8f0dc4cfd106 introduces an assembly version of memmove but
it does take misalignment into account (it checks if length is a
multiple of machine word size but pointers need also be aligned).
As a result it will generate misaligned load/store for the majority
of cases and causes significant performance regression on hardware
that traps misaligned load/store and emulate them using firmware.
The current behaviour of memcpy is that it checks if both src and
dest pointers are co-aligned (aka congruent modular SZ_REG). If
aligned, it will copy data word-by-word after first aligning
pointers to word boundary. If src and dst are not co-aligned,
however, byte-wise copy will be performed.
This patch was taken from the Linux kernel patch [1], which has not
been applied at the time being. It fixes the memmove and optimises
memcpy for misaligned cases. It will first align destination pointer
to word-boundary regardless whether src and dest are co-aligned or
not. If they indeed are, then wordwise copy is performed. If they
are not co-aligned, then it will load two adjacent words from src
and use shifts to assemble a full machine word. Some additional
assembly level micro-optimisation is also performed to ensure more
instructions can be compressed (e.g. prefer a0 to t6).
With this patch, U-Boot boots again on SiFive Unleashed board.
[1] https://patchwork.kernel.org/project/linux-riscv/patch/20210216225555.4976-1-gary@garyguo.net/
Fixes: 8f0dc4cfd106 ("riscv: assembler versions of memcpy, memmove, memset")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-13 17:46:17 +09:00
|
|
|
* Use bytewise copy if too small.
|
|
|
|
|
*
|
|
|
|
|
* This threshold must be at least 2*SZREG to ensure at least one
|
|
|
|
|
* wordwise copy is performed. It is chosen to be 16 because it will
|
|
|
|
|
* save at least 7 iterations of bytewise copy, which pays off the
|
|
|
|
|
* fixed overhead.
|
2021-03-27 20:37:04 +09:00
|
|
|
*/
|
riscv: Fix memmove and optimise memcpy when misalign
At present U-Boot SPL fails to boot on SiFive Unleashed board, due
to a load address misaligned exception happens when loading the FIT
image in spl_load_simple_fit(). The exception happens in memmove()
which is called by fdt_splice_().
Commit 8f0dc4cfd106 introduces an assembly version of memmove but
it does take misalignment into account (it checks if length is a
multiple of machine word size but pointers need also be aligned).
As a result it will generate misaligned load/store for the majority
of cases and causes significant performance regression on hardware
that traps misaligned load/store and emulate them using firmware.
The current behaviour of memcpy is that it checks if both src and
dest pointers are co-aligned (aka congruent modular SZ_REG). If
aligned, it will copy data word-by-word after first aligning
pointers to word boundary. If src and dst are not co-aligned,
however, byte-wise copy will be performed.
This patch was taken from the Linux kernel patch [1], which has not
been applied at the time being. It fixes the memmove and optimises
memcpy for misaligned cases. It will first align destination pointer
to word-boundary regardless whether src and dest are co-aligned or
not. If they indeed are, then wordwise copy is performed. If they
are not co-aligned, then it will load two adjacent words from src
and use shifts to assemble a full machine word. Some additional
assembly level micro-optimisation is also performed to ensure more
instructions can be compressed (e.g. prefer a0 to t6).
With this patch, U-Boot boots again on SiFive Unleashed board.
[1] https://patchwork.kernel.org/project/linux-riscv/patch/20210216225555.4976-1-gary@garyguo.net/
Fixes: 8f0dc4cfd106 ("riscv: assembler versions of memcpy, memmove, memset")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-13 17:46:17 +09:00
|
|
|
li a3, 16
|
|
|
|
|
bltu a2, a3, .Lbyte_copy_tail
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Bytewise copy first to align a0 to word boundary.
|
|
|
|
|
*/
|
|
|
|
|
addi a2, a0, SZREG-1
|
|
|
|
|
andi a2, a2, ~(SZREG-1)
|
|
|
|
|
beq a0, a2, 2f
|
2021-03-27 20:37:04 +09:00
|
|
|
1:
|
riscv: Fix memmove and optimise memcpy when misalign
At present U-Boot SPL fails to boot on SiFive Unleashed board, due
to a load address misaligned exception happens when loading the FIT
image in spl_load_simple_fit(). The exception happens in memmove()
which is called by fdt_splice_().
Commit 8f0dc4cfd106 introduces an assembly version of memmove but
it does take misalignment into account (it checks if length is a
multiple of machine word size but pointers need also be aligned).
As a result it will generate misaligned load/store for the majority
of cases and causes significant performance regression on hardware
that traps misaligned load/store and emulate them using firmware.
The current behaviour of memcpy is that it checks if both src and
dest pointers are co-aligned (aka congruent modular SZ_REG). If
aligned, it will copy data word-by-word after first aligning
pointers to word boundary. If src and dst are not co-aligned,
however, byte-wise copy will be performed.
This patch was taken from the Linux kernel patch [1], which has not
been applied at the time being. It fixes the memmove and optimises
memcpy for misaligned cases. It will first align destination pointer
to word-boundary regardless whether src and dest are co-aligned or
not. If they indeed are, then wordwise copy is performed. If they
are not co-aligned, then it will load two adjacent words from src
and use shifts to assemble a full machine word. Some additional
assembly level micro-optimisation is also performed to ensure more
instructions can be compressed (e.g. prefer a0 to t6).
With this patch, U-Boot boots again on SiFive Unleashed board.
[1] https://patchwork.kernel.org/project/linux-riscv/patch/20210216225555.4976-1-gary@garyguo.net/
Fixes: 8f0dc4cfd106 ("riscv: assembler versions of memcpy, memmove, memset")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-13 17:46:17 +09:00
|
|
|
lb a5, 0(a1)
|
|
|
|
|
addi a1, a1, 1
|
|
|
|
|
sb a5, 0(a0)
|
|
|
|
|
addi a0, a0, 1
|
|
|
|
|
bne a0, a2, 1b
|
|
|
|
|
2:
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Now a0 is word-aligned. If a1 is also word aligned, we could perform
|
|
|
|
|
* aligned word-wise copy. Otherwise we need to perform misaligned
|
|
|
|
|
* word-wise copy.
|
|
|
|
|
*/
|
|
|
|
|
andi a3, a1, SZREG-1
|
|
|
|
|
bnez a3, .Lmisaligned_word_copy
|
2021-03-27 20:37:04 +09:00
|
|
|
|
riscv: Fix memmove and optimise memcpy when misalign
At present U-Boot SPL fails to boot on SiFive Unleashed board, due
to a load address misaligned exception happens when loading the FIT
image in spl_load_simple_fit(). The exception happens in memmove()
which is called by fdt_splice_().
Commit 8f0dc4cfd106 introduces an assembly version of memmove but
it does take misalignment into account (it checks if length is a
multiple of machine word size but pointers need also be aligned).
As a result it will generate misaligned load/store for the majority
of cases and causes significant performance regression on hardware
that traps misaligned load/store and emulate them using firmware.
The current behaviour of memcpy is that it checks if both src and
dest pointers are co-aligned (aka congruent modular SZ_REG). If
aligned, it will copy data word-by-word after first aligning
pointers to word boundary. If src and dst are not co-aligned,
however, byte-wise copy will be performed.
This patch was taken from the Linux kernel patch [1], which has not
been applied at the time being. It fixes the memmove and optimises
memcpy for misaligned cases. It will first align destination pointer
to word-boundary regardless whether src and dest are co-aligned or
not. If they indeed are, then wordwise copy is performed. If they
are not co-aligned, then it will load two adjacent words from src
and use shifts to assemble a full machine word. Some additional
assembly level micro-optimisation is also performed to ensure more
instructions can be compressed (e.g. prefer a0 to t6).
With this patch, U-Boot boots again on SiFive Unleashed board.
[1] https://patchwork.kernel.org/project/linux-riscv/patch/20210216225555.4976-1-gary@garyguo.net/
Fixes: 8f0dc4cfd106 ("riscv: assembler versions of memcpy, memmove, memset")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-13 17:46:17 +09:00
|
|
|
/* Unrolled wordwise copy */
|
|
|
|
|
addi t0, t0, -(16*SZREG-1)
|
|
|
|
|
bgeu a0, t0, 2f
|
|
|
|
|
1:
|
|
|
|
|
REG_L a2, 0(a1)
|
|
|
|
|
REG_L a3, SZREG(a1)
|
|
|
|
|
REG_L a4, 2*SZREG(a1)
|
|
|
|
|
REG_L a5, 3*SZREG(a1)
|
|
|
|
|
REG_L a6, 4*SZREG(a1)
|
|
|
|
|
REG_L a7, 5*SZREG(a1)
|
|
|
|
|
REG_L t1, 6*SZREG(a1)
|
|
|
|
|
REG_L t2, 7*SZREG(a1)
|
|
|
|
|
REG_L t3, 8*SZREG(a1)
|
|
|
|
|
REG_L t4, 9*SZREG(a1)
|
|
|
|
|
REG_L t5, 10*SZREG(a1)
|
|
|
|
|
REG_S a2, 0(a0)
|
|
|
|
|
REG_S a3, SZREG(a0)
|
|
|
|
|
REG_S a4, 2*SZREG(a0)
|
|
|
|
|
REG_S a5, 3*SZREG(a0)
|
|
|
|
|
REG_S a6, 4*SZREG(a0)
|
|
|
|
|
REG_S a7, 5*SZREG(a0)
|
|
|
|
|
REG_S t1, 6*SZREG(a0)
|
|
|
|
|
REG_S t2, 7*SZREG(a0)
|
|
|
|
|
REG_S t3, 8*SZREG(a0)
|
|
|
|
|
REG_S t4, 9*SZREG(a0)
|
|
|
|
|
REG_S t5, 10*SZREG(a0)
|
|
|
|
|
REG_L a2, 11*SZREG(a1)
|
|
|
|
|
REG_L a3, 12*SZREG(a1)
|
|
|
|
|
REG_L a4, 13*SZREG(a1)
|
|
|
|
|
REG_L a5, 14*SZREG(a1)
|
|
|
|
|
REG_L a6, 15*SZREG(a1)
|
|
|
|
|
addi a1, a1, 16*SZREG
|
|
|
|
|
REG_S a2, 11*SZREG(a0)
|
|
|
|
|
REG_S a3, 12*SZREG(a0)
|
|
|
|
|
REG_S a4, 13*SZREG(a0)
|
|
|
|
|
REG_S a5, 14*SZREG(a0)
|
|
|
|
|
REG_S a6, 15*SZREG(a0)
|
|
|
|
|
addi a0, a0, 16*SZREG
|
|
|
|
|
bltu a0, t0, 1b
|
2021-03-27 20:37:04 +09:00
|
|
|
2:
|
riscv: Fix memmove and optimise memcpy when misalign
At present U-Boot SPL fails to boot on SiFive Unleashed board, due
to a load address misaligned exception happens when loading the FIT
image in spl_load_simple_fit(). The exception happens in memmove()
which is called by fdt_splice_().
Commit 8f0dc4cfd106 introduces an assembly version of memmove but
it does take misalignment into account (it checks if length is a
multiple of machine word size but pointers need also be aligned).
As a result it will generate misaligned load/store for the majority
of cases and causes significant performance regression on hardware
that traps misaligned load/store and emulate them using firmware.
The current behaviour of memcpy is that it checks if both src and
dest pointers are co-aligned (aka congruent modular SZ_REG). If
aligned, it will copy data word-by-word after first aligning
pointers to word boundary. If src and dst are not co-aligned,
however, byte-wise copy will be performed.
This patch was taken from the Linux kernel patch [1], which has not
been applied at the time being. It fixes the memmove and optimises
memcpy for misaligned cases. It will first align destination pointer
to word-boundary regardless whether src and dest are co-aligned or
not. If they indeed are, then wordwise copy is performed. If they
are not co-aligned, then it will load two adjacent words from src
and use shifts to assemble a full machine word. Some additional
assembly level micro-optimisation is also performed to ensure more
instructions can be compressed (e.g. prefer a0 to t6).
With this patch, U-Boot boots again on SiFive Unleashed board.
[1] https://patchwork.kernel.org/project/linux-riscv/patch/20210216225555.4976-1-gary@garyguo.net/
Fixes: 8f0dc4cfd106 ("riscv: assembler versions of memcpy, memmove, memset")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-13 17:46:17 +09:00
|
|
|
/* Post-loop increment by 16*SZREG-1 and pre-loop decrement by SZREG-1 */
|
|
|
|
|
addi t0, t0, 15*SZREG
|
2021-03-27 20:37:04 +09:00
|
|
|
|
riscv: Fix memmove and optimise memcpy when misalign
At present U-Boot SPL fails to boot on SiFive Unleashed board, due
to a load address misaligned exception happens when loading the FIT
image in spl_load_simple_fit(). The exception happens in memmove()
which is called by fdt_splice_().
Commit 8f0dc4cfd106 introduces an assembly version of memmove but
it does take misalignment into account (it checks if length is a
multiple of machine word size but pointers need also be aligned).
As a result it will generate misaligned load/store for the majority
of cases and causes significant performance regression on hardware
that traps misaligned load/store and emulate them using firmware.
The current behaviour of memcpy is that it checks if both src and
dest pointers are co-aligned (aka congruent modular SZ_REG). If
aligned, it will copy data word-by-word after first aligning
pointers to word boundary. If src and dst are not co-aligned,
however, byte-wise copy will be performed.
This patch was taken from the Linux kernel patch [1], which has not
been applied at the time being. It fixes the memmove and optimises
memcpy for misaligned cases. It will first align destination pointer
to word-boundary regardless whether src and dest are co-aligned or
not. If they indeed are, then wordwise copy is performed. If they
are not co-aligned, then it will load two adjacent words from src
and use shifts to assemble a full machine word. Some additional
assembly level micro-optimisation is also performed to ensure more
instructions can be compressed (e.g. prefer a0 to t6).
With this patch, U-Boot boots again on SiFive Unleashed board.
[1] https://patchwork.kernel.org/project/linux-riscv/patch/20210216225555.4976-1-gary@garyguo.net/
Fixes: 8f0dc4cfd106 ("riscv: assembler versions of memcpy, memmove, memset")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-13 17:46:17 +09:00
|
|
|
/* Wordwise copy */
|
|
|
|
|
bgeu a0, t0, 2f
|
|
|
|
|
1:
|
|
|
|
|
REG_L a5, 0(a1)
|
|
|
|
|
addi a1, a1, SZREG
|
|
|
|
|
REG_S a5, 0(a0)
|
|
|
|
|
addi a0, a0, SZREG
|
|
|
|
|
bltu a0, t0, 1b
|
|
|
|
|
2:
|
|
|
|
|
addi t0, t0, SZREG-1
|
2021-03-27 20:37:04 +09:00
|
|
|
|
riscv: Fix memmove and optimise memcpy when misalign
At present U-Boot SPL fails to boot on SiFive Unleashed board, due
to a load address misaligned exception happens when loading the FIT
image in spl_load_simple_fit(). The exception happens in memmove()
which is called by fdt_splice_().
Commit 8f0dc4cfd106 introduces an assembly version of memmove but
it does take misalignment into account (it checks if length is a
multiple of machine word size but pointers need also be aligned).
As a result it will generate misaligned load/store for the majority
of cases and causes significant performance regression on hardware
that traps misaligned load/store and emulate them using firmware.
The current behaviour of memcpy is that it checks if both src and
dest pointers are co-aligned (aka congruent modular SZ_REG). If
aligned, it will copy data word-by-word after first aligning
pointers to word boundary. If src and dst are not co-aligned,
however, byte-wise copy will be performed.
This patch was taken from the Linux kernel patch [1], which has not
been applied at the time being. It fixes the memmove and optimises
memcpy for misaligned cases. It will first align destination pointer
to word-boundary regardless whether src and dest are co-aligned or
not. If they indeed are, then wordwise copy is performed. If they
are not co-aligned, then it will load two adjacent words from src
and use shifts to assemble a full machine word. Some additional
assembly level micro-optimisation is also performed to ensure more
instructions can be compressed (e.g. prefer a0 to t6).
With this patch, U-Boot boots again on SiFive Unleashed board.
[1] https://patchwork.kernel.org/project/linux-riscv/patch/20210216225555.4976-1-gary@garyguo.net/
Fixes: 8f0dc4cfd106 ("riscv: assembler versions of memcpy, memmove, memset")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-13 17:46:17 +09:00
|
|
|
.Lbyte_copy_tail:
|
|
|
|
|
/*
|
|
|
|
|
* Bytewise copy anything left.
|
|
|
|
|
*/
|
|
|
|
|
beq a0, t0, 2f
|
|
|
|
|
1:
|
|
|
|
|
lb a5, 0(a1)
|
|
|
|
|
addi a1, a1, 1
|
|
|
|
|
sb a5, 0(a0)
|
|
|
|
|
addi a0, a0, 1
|
|
|
|
|
bne a0, t0, 1b
|
|
|
|
|
2:
|
|
|
|
|
|
|
|
|
|
mv a0, t6
|
2021-03-27 20:37:04 +09:00
|
|
|
ret
|
riscv: Fix memmove and optimise memcpy when misalign
At present U-Boot SPL fails to boot on SiFive Unleashed board, due
to a load address misaligned exception happens when loading the FIT
image in spl_load_simple_fit(). The exception happens in memmove()
which is called by fdt_splice_().
Commit 8f0dc4cfd106 introduces an assembly version of memmove but
it does take misalignment into account (it checks if length is a
multiple of machine word size but pointers need also be aligned).
As a result it will generate misaligned load/store for the majority
of cases and causes significant performance regression on hardware
that traps misaligned load/store and emulate them using firmware.
The current behaviour of memcpy is that it checks if both src and
dest pointers are co-aligned (aka congruent modular SZ_REG). If
aligned, it will copy data word-by-word after first aligning
pointers to word boundary. If src and dst are not co-aligned,
however, byte-wise copy will be performed.
This patch was taken from the Linux kernel patch [1], which has not
been applied at the time being. It fixes the memmove and optimises
memcpy for misaligned cases. It will first align destination pointer
to word-boundary regardless whether src and dest are co-aligned or
not. If they indeed are, then wordwise copy is performed. If they
are not co-aligned, then it will load two adjacent words from src
and use shifts to assemble a full machine word. Some additional
assembly level micro-optimisation is also performed to ensure more
instructions can be compressed (e.g. prefer a0 to t6).
With this patch, U-Boot boots again on SiFive Unleashed board.
[1] https://patchwork.kernel.org/project/linux-riscv/patch/20210216225555.4976-1-gary@garyguo.net/
Fixes: 8f0dc4cfd106 ("riscv: assembler versions of memcpy, memmove, memset")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-13 17:46:17 +09:00
|
|
|
|
|
|
|
|
.Lmisaligned_word_copy:
|
|
|
|
|
/*
|
|
|
|
|
* Misaligned word-wise copy.
|
|
|
|
|
* For misaligned copy we still perform word-wise copy, but we need to
|
|
|
|
|
* use the value fetched from the previous iteration and do some shifts.
|
|
|
|
|
* This is safe because we wouldn't access more words than necessary.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/* Calculate shifts */
|
|
|
|
|
slli t3, a3, 3
|
|
|
|
|
sub t4, x0, t3 /* negate is okay as shift will only look at LSBs */
|
|
|
|
|
|
|
|
|
|
/* Load the initial value and align a1 */
|
|
|
|
|
andi a1, a1, ~(SZREG-1)
|
|
|
|
|
REG_L a5, 0(a1)
|
|
|
|
|
|
|
|
|
|
addi t0, t0, -(SZREG-1)
|
|
|
|
|
/* At least one iteration will be executed here, no check */
|
|
|
|
|
1:
|
|
|
|
|
srl a4, a5, t3
|
|
|
|
|
REG_L a5, SZREG(a1)
|
|
|
|
|
addi a1, a1, SZREG
|
|
|
|
|
sll a2, a5, t4
|
|
|
|
|
or a2, a2, a4
|
|
|
|
|
REG_S a2, 0(a0)
|
|
|
|
|
addi a0, a0, SZREG
|
|
|
|
|
bltu a0, t0, 1b
|
|
|
|
|
|
|
|
|
|
/* Update pointers to correct value */
|
|
|
|
|
addi t0, t0, SZREG-1
|
|
|
|
|
add a1, a1, a3
|
|
|
|
|
|
|
|
|
|
j .Lbyte_copy_tail
|
2021-03-27 20:37:04 +09:00
|
|
|
END(__memcpy)
|