u-boot-brain/board/gdsys/mpc8308/Makefile

# SPDX-License-Identifier: GPL-2.0+
#
# (C) Copyright 2014
# Dirk Eibach,  Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc

obj-y := mpc8308.o sdram.o
obj-$(CONFIG_TARGET_HRCON) += hrcon.o
obj-$(CONFIG_TARGET_STRIDER) += strider.o
obj-$(CONFIG_TARGET_GAZERBEAM) += gazerbeam.o
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-07 06:58:06 +09:00			`# SPDX-License-Identifier: GPL-2.0+`
mpc83xx: Add gdsys hrcon board The gdsys hrcon board is based on a Freescale MPC8308 SOC. It boots from NOR-Flash, kernel and rootfs are stored on SD-Card. On board peripherals include: - 1x GbE (optional) - Lattice ECP3 FPGA connected via eLBC and PCIe Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Stefan Roese <sr@denx.de> 2014-11-14 03:21:18 +09:00			`#`
			`# (C) Copyright 2014`
treewide: Fix gdsys mail addresses The @gdsys.cc addresses are supposed to be used for mailing lists. Switch all occurrences of @gdsys.de mail addresses to their @gdsys.cc equivalent. Also, Dirk's address was wrong in one place; fix that as well. Signed-off-by: Mario Six <six@gdsys.cc> 2018-03-06 16:04:58 +09:00			`# Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc`
mpc83xx: Add gdsys hrcon board The gdsys hrcon board is based on a Freescale MPC8308 SOC. It boots from NOR-Flash, kernel and rootfs are stored on SD-Card. On board peripherals include: - 1x GbE (optional) - Lattice ECP3 FPGA connected via eLBC and PCIe Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Stefan Roese <sr@denx.de> 2014-11-14 03:21:18 +09:00
			`obj-y := mpc8308.o sdram.o`
hrcon: Migrate to CONFIG_TARGET_HRCON Use the proper CONFIG_TARGET_HRCON Kconfig option to replace the CONFIG_HRCON ad-hoc config option. Signed-off-by: Mario Six <mario.six@gdsys.cc> 2019-01-21 17:17:45 +09:00			`obj-$(CONFIG_TARGET_HRCON) += hrcon.o`
strider: Migrate to CONFIG_TARGET_STRIDER Use the proper CONFIG_TARGET_STRIDER Kconfig option to replace the CONFIG_STRIDER ad-hoc config option. Signed-off-by: Mario Six <mario.six@gdsys.cc> 2019-01-21 17:17:46 +09:00			`obj-$(CONFIG_TARGET_STRIDER) += strider.o`
mpc83xx: Add gazerbeam board The gdsys gazerbeam board is based on a Freescale MPC8308 SOC. It boots from NOR-Flash, kernel and rootfs are stored on SD-Card. On board peripherals include: - 2x 10/100 Mbit/s Ethernet (optional) Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Mario Six <mario.six@gdsys.cc> 2019-03-29 18:18:19 +09:00			`obj-$(CONFIG_TARGET_GAZERBEAM) += gazerbeam.o`