hrcon: Migrate to CONFIG_TARGET_HRCON

Use the proper CONFIG_TARGET_HRCON Kconfig option to replace
the CONFIG_HRCON ad-hoc config option.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
This commit is contained in:
Mario Six 2019-01-21 09:17:45 +01:00
parent 4cb06d3edf
commit d6918816fb
5 changed files with 3 additions and 5 deletions

View File

@ -10,7 +10,7 @@ obj-$(CONFIG_IO64) += miiphybb.o
obj-$(CONFIG_IOCON) += osd.o mclink.o dp501.o phy.o ch7301.o
obj-$(CONFIG_DLVISION_10G) += osd.o dp501.o
obj-$(CONFIG_CONTROLCENTERD) += dp501.o
obj-$(CONFIG_HRCON) += osd.o mclink.o dp501.o phy.o ioep-fpga.o fanctrl.o
obj-$(CONFIG_TARGET_HRCON) += osd.o mclink.o dp501.o phy.o ioep-fpga.o fanctrl.o
obj-$(CONFIG_STRIDER) += mclink.o dp501.o phy.o ioep-fpga.o adv7611.o ch7301.o
obj-$(CONFIG_STRIDER) += fanctrl.o
obj-$(CONFIG_STRIDER_CON) += osd.o

View File

@ -4,5 +4,5 @@
# Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
obj-y := mpc8308.o sdram.o
obj-$(CONFIG_HRCON) += hrcon.o
obj-$(CONFIG_TARGET_HRCON) += hrcon.o
obj-$(CONFIG_STRIDER) += strider.o

View File

@ -13,7 +13,6 @@
*/
#define CONFIG_E300 1 /* E300 family */
#define CONFIG_MPC83xx 1 /* MPC83xx family */
#define CONFIG_HRCON 1 /* HRCON board specific */
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR

View File

@ -161,7 +161,7 @@ struct ihs_fpga {
};
#endif
#if defined(CONFIG_HRCON) || defined(CONFIG_STRIDER_CON_DP)
#if defined(CONFIG_TARGET_HRCON) || defined(CONFIG_STRIDER_CON_DP)
struct ihs_fpga {
u16 reflection_low; /* 0x0000 */
u16 versions; /* 0x0002 */

View File

@ -881,7 +881,6 @@ CONFIG_HPS_SDR_CTRLCFG_RFIFOCMAP_RFIFOCMAP
CONFIG_HPS_SDR_CTRLCFG_STATICCFG_MEMBL
CONFIG_HPS_SDR_CTRLCFG_STATICCFG_USEECCASDATA
CONFIG_HPS_SDR_CTRLCFG_WFIFOCMAP_WFIFOCMAP
CONFIG_HRCON
CONFIG_HRCON_DH
CONFIG_HRCON_FANS
CONFIG_HSMMC2_8BIT