Pull RAS updates from Ingo Molnar:
"Various RAS updates:
- AMD MCE support updates for future CPUs, fixes and 'SMCA' (Scalable
MCA) error decoding support (Aravind Gopalakrishnan)
- x86 memcpy_mcsafe() support, to enable smart(er) hardware error
recovery in NVDIMM drivers, based on an extension of the x86
exception handling code. (Tony Luck)"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
EDAC/sb_edac: Fix computation of channel address
x86/mm, x86/mce: Add memcpy_mcsafe()
x86/mce/AMD: Document some functionality
x86/mce: Clarify comments regarding deferred error
x86/mce/AMD: Fix logic to obtain block address
x86/mce/AMD, EDAC: Enable error decoding of Scalable MCA errors
x86/mce: Move MCx_CONFIG MSR definitions
x86/mce: Check for faults tagged in EXTABLE_CLASS_FAULT exception table entries
x86/mm: Expand the exception table logic to allow new handling options
x86/mce/AMD: Set MCAX Enable bit
x86/mce/AMD: Carve out threshold block preparation
x86/mce/AMD: Fix LVT offset configuration for thresholding
x86/mce/AMD: Reduce number of blocks scanned per bank
x86/mce/AMD: Do not perform shared bank check for future processors
x86/mce: Fix order of AMD MCE init function call
Large memory Haswell-EX systems with multiple DIMMs per channel were
sometimes reporting the wrong DIMM.
Found three problems:
1) Debug printouts for socket and channel interleave were not interpreting
the register fields correctly. The socket interleave field is a 2^X
value (0=1, 1=2, 2=4, 3=8). The channel interleave is X+1 (0=1, 1=2,
2=3. 3=4).
2) Actual use of the socket interleave value didn't interpret as 2^X
3) Conversion of address to channel address was complicated, and wrong.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Aristeu Rozanski <arozansk@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-edac@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Correct a typo introduced by
d0cdf90031 ("EDAC, sb_edac: Add Knights Landing (Xeon Phi gen 2) support")
As a result under some configurations DIMMs were not correctly
recognized. Problem affects only Xeon Phi architecture.
Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: lukasz.anaczkowski@intel.com
Link: http://lkml.kernel.org/r/1457361045-26221-1-git-send-email-hubert.chrzaniuk@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Knights Landing does not come with register that could be used to fetch
DIMM width. However the value is fixed for this architecture so it can
be hardcoded.
Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: lukasz.anaczkowski@intel.com
Link: http://lkml.kernel.org/r/1449840082-18673-1-git-send-email-hubert.chrzaniuk@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Knights Landing is the next generation architecture for HPC market.
KNL introduces concept of a tile and CHA - Cache/Home Agent for memory
accesses.
Some things are fixed in KNL:
() There's single DIMM slot per channel
() There's 2 memory controllers with 3 channels each, however,
from EDAC standpoint, it is presented as single memory controller
with 6 channels. In order to represent 2 MCs w/ 3 CH, it would
require major redesign of EDAC core driver.
Basically, two functionalities are added/extended:
() during driver initialization KNL topology is being recognized, i.e.
which channels are populated with what DIMM sizes
(knl_get_dimm_capacity function)
() handle MCE errors - channel swizzling
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Jim Snow <jim.m.snow@intel.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: lukasz.anaczkowski@intel.com
Link: http://lkml.kernel.org/r/1449136134-23706-5-git-send-email-hubert.chrzaniuk@intel.com
[ Rebase to 4.4-rc3. ]
Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Add options to sbridge_get_all_devices() to allow for duplicate device
IDs and devices that are scattered across mulitple PCI buses.
Signed-off-by: Jim Snow <jim.m.snow@intel.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: lukasz.anaczkowski@intel.com
Link: http://lkml.kernel.org/r/1449136134-23706-4-git-send-email-hubert.chrzaniuk@intel.com
[ Rebase to 4.4-rc3. ]
Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
SAD limit, interleave mode and DRAM related functionalities are now
virtualized, so that overriding them is easier.
Signed-off-by: Jim Snow <jim.m.snow@intel.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: lukasz.anaczkowski@intel.com
Link: http://lkml.kernel.org/r/1449136134-23706-3-git-send-email-hubert.chrzaniuk@intel.com
[ Rebase to 4.4-rc3. ]
Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
In commit
7d375bffa5 ("sb_edac: Fix support for systems with two home agents per socket")
NUM_CHANNELS was changed to 8 and the channel space was renumerated to
handle EN, EP, and EX configurations.
The *_mci_bind_devs() functions - except for sbridge_mci_bind_devs() -
got a new device presence check in the form of saw_chan_mask. However,
sbridge_mci_bind_devs() still uses the NUM_CHANNELS for loop.
With the increase in NUM_CHANNELS, this loop fails at index 4 since
SB only has 4 TADs. This results in the following error on SB machines:
EDAC sbridge: Some needed devices are missing
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Couldn't find mci handle
This patch adapts the saw_chan_mask logic for sbridge_mci_bind_devs() as
well.
After this patch:
EDAC MC0: Giving out device to module sbridge_edac.c controller Sandy Bridge Socket#0: DEV 0000:3f:0e.0 (POLLED)
EDAC MC1: Giving out device to module sbridge_edac.c controller Sandy Bridge Socket#1: DEV 0000:7f:0e.0 (POLLED)
Signed-off-by: Seth Jennings <sjenning@redhat.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Tested-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org> # v4.2
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1438798561-10180-1-git-send-email-sjenning@redhat.com
Signed-off-by: Borislav Petkov <bp@suse.de>
dimm_dev_type has been incorrectly determined in sb_edac. This patch fixes it
for Ivy Bridge and Haswell only since nothing like exists for Sandy Bridge.
We tested this patch in multiple systems matching the results with the
installed memory modules.
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
In case the memory banks are populated so the first channel isn't used, the
DDRIO PCI device won't be visible and it won't be possible to determine the
memory type.
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Basic support for the single socket Broadwell-DE processor
was added back in commit 1f39581a9a
sb_edac: Add support for Broadwell-DE processor
This patch extends Broadwell support to cover the two
socket "-EP" and four socket "-EX" versions of Broadwell.
Only tested on the 2 socket - but this code is largely
cloned from the Haswell path.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
First noticed a problem on a 4 socket machine where EDAC only reported
half the DIMMS. Tracked this down to the code that assumes that systems
with two home agents only have two memory channels on each agent. This
is true on 2 sockect ("-EP") machines. But four socket ("-EX") machines
have four memory channels on each home agent.
The old code would have had problems on two socket systems as it did
a shuffling trick to make the internals of the code think that the
channels from the first agent were '0' and '1', with the second agent
providing '2' and '3'. But the code didn't uniformly convert from
{ha,channel} tuples to this internal representation.
New code always considers up to eight channels.
On a machine with a single home agent these map easily to edac channels
0, 1, 2, 3. On machines with two home agents we map using:
edac_channel = 4*ha# + channel
So on a -EP machine where each home agent supports only two channels
we'll fill in channels 0, 1, 4, 5, and on a -EX machine we use all of 0,
1, 2, 3, 4, 5, 6, 7.
[mchehab@osg.samsung.com: fold a fixup patch as per Tony's request and fixed
a few CodingStyle issues]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
typo: "a7mode" chooses whether to use bits {8, 7, 9} or {8, 7, 6}
in the algorithm to spread access between memory resources. But
the non-a7mode path was incorrectly using GET_BITFIELD(addr, 7, 9)
and so picking bits {9, 8, 7}
thinko: BIT(1) of the dram_rule registers chooses whether to just
use the {8, 7, 6} (or {8, 7, 9}) bits mentioned above as they are,
or to XOR them with bits {18, 17, 16} but the code inverted the
test. We need the additional XOR when dram_rule{1} == 0.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
d0585cd815 ("sb_edac: Claim a different PCI device") changed the
probing of sb_edac to look for PCI device 0x3ca0:
3f:0e.0 System peripheral: Intel Corporation Xeon E5/Core i7 Processor Home Agent (rev 07)
00: 86 80 a0 3c 00 00 00 00 07 00 80 08 00 00 80 00
...
but we're matching for 0x3ca8, i.e. PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA
in sbridge_probe() therefore the probing fails.
Changing it to probe for 0x3ca0 (PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_HA0),
.i.e., the 14.0 device, fixes the issue and driver loads successfully
again:
[ 2449.013120] EDAC DEBUG: sbridge_init:
[ 2449.017029] EDAC sbridge: Seeking for: PCI ID 8086:3ca0
[ 2449.022368] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:3ca0
[ 2449.028498] EDAC sbridge: Seeking for: PCI ID 8086:3ca0
[ 2449.033768] EDAC sbridge: Seeking for: PCI ID 8086:3ca8
[ 2449.039028] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:3ca8
[ 2449.045155] EDAC sbridge: Seeking for: PCI ID 8086:3ca8
...
Add a debug printk while at it to be able to catch the failure in the
future and dump driver version on successful load.
Fixes: d0585cd815 ("sb_edac: Claim a different PCI device")
Cc: stable@vger.kernel.org # 3.18
Acked-by: Aristeu Rozanski <aris@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Code will always think there are 16 banks because of a typo
Reported-by: Misha
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Broadwell-DE is the microserver version of next generation Xeon
processors. A whole bunch of new PCIe device ids, but otherwise
pretty much the same as Haswell.
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Haswell moved the TOLM/TOHM registers to a different device and offset.
The sb_edac driver accounted for the change of device, but not for the
new offset. There was also a typo in the constant to fill in the low
26 bits (was 0x1ffffff, should be 0x3ffffff).
This resulted in a bogus value for the top of low memory:
EDAC DEBUG: get_memory_layout: TOLM: 0.032 GB (0x0000000001ffffff)
which would result in EDAC refusing to translate addresses for
errors above the bogus value and below 4GB:
sbridge MC3: HANDLING MCE MEMORY ERROR
sbridge MC3: CPU 0: Machine Check Event: 0 Bank 7: 8c00004000010090
sbridge MC3: TSC 0
sbridge MC3: ADDR 2000000
sbridge MC3: MISC 523eac86
sbridge MC3: PROCESSOR 0:306f3 TIME 1414600951 SOCKET 0 APIC 0
MC3: 1 CE Error at TOLM area, on addr 0x02000000 on any memory ( page:0x0 offset:0x0 grain:32 syndrome:0x0)
With the fix we see the correct TOLM value:
DEBUG: get_memory_layout: TOLM: 2.048 GB (0x000000007fffffff)
and we decode address 2000000 correctly:
sbridge MC3: HANDLING MCE MEMORY ERROR
sbridge MC3: CPU 0: Machine Check Event: 0 Bank 7: 8c00004000010090
sbridge MC3: TSC 0
sbridge MC3: ADDR 2000000
sbridge MC3: MISC 523e1086
sbridge MC3: PROCESSOR 0:306f3 TIME 1414601319 SOCKET 0 APIC 0
DEBUG: get_memory_error_data: SAD interleave package: 0 = CPU socket 0, HA 0, shiftup: 0
DEBUG: get_memory_error_data: TAD#0: address 0x0000000002000000 < 0x000000007fffffff, socket interleave 1, channel interleave 4 (offset 0x00000000), index 0, base ch: 0, ch mask: 0x01
DEBUG: get_memory_error_data: RIR#0, limit: 4.095 GB (0x00000000ffffffff), way: 1
DEBUG: get_memory_error_data: RIR#0: channel address 0x00200000 < 0xffffffff, RIR interleave 0, index 0
DEBUG: sbridge_mce_output_error: area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:0
MC3: 1 CE memory read error on CPU_SrcID#0_Channel#0_DIMM#0 (channel:0 slot:0 page:0x2000 offset:0x0 grain:32 syndrome:0x0 - area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:0)
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
sb_edac controls a large number of different PCI functions. Rather
than registering as a normal PCI driver for all of them, it
registers for just one so that it gets probed and, at probe time, it
looks for all the others.
Coincidentally, the device it registers for also contains the SMBUS
registers, so the PCI core will refuse to probe both sb_edac and a
future iMC SMBUS driver. The drivers don't actually conflict, so
just change sb_edac's device table to probe a different device.
An alternative fix would be to merge the two drivers, but sb_edac
will also refuse to load on non-ECC systems, whereas i2c_imc would
still be useful without ECC.
The only user-visible change should be that sb_edac appears to bind
a different device.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: Rui Wang <ruiv.wang@gmail.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The i2c_imc driver will use two of them, and moving only part of
the list seems messier.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Intel IA32 SDM Table 15-14 defines channel 0xf as 'not specified', but
EDAC doesn't know about this and returns and INTERNAL ERROR when the
channel is greater than NUM_CHANNELS:
kernel: [ 1538.886456] CPU 0: Machine Check Exception: 0 Bank 1: 940000000000009f
kernel: [ 1538.886669] TSC 2bc68b22e7e812 ADDR 46dae7000 MISC 0 PROCESSOR 0:306e4 TIME 1390414572 SOCKET 0 APIC 0
kernel: [ 1538.971948] EDAC MC1: INTERNAL ERROR: channel value is out of range (15 >= 4)
kernel: [ 1538.972203] EDAC MC1: 0 CE memory read error on unknown memory (slot:0 page:0x46dae7 offset:0x0 grain:0 syndrome:0x0 - area:DRAM err_code:0000:009f socket:1 channel_mask:1 rank:0)
This commit changes sb_edac to forward a channel of -1 to EDAC if the
channel is not specified. edac_mc_handle_error() sets the channel to -1
internally after the error message anyway, so this commit should have no
effect other than avoiding the INTERNAL ERROR message when the channel
is not specified.
Signed-off-by: Seth Jennings <sjenning@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Haswell memory controllers are very similar to Ivy Bridge and Sandy Bridge
ones. This patch adds support to Haswell based systems.
[m.chehab@samsung.com: Fix CodingStyle issues]
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
When a MC is handled, the correct sbridge_dev is searched based on the node,
checking again later with the assumption the first memory controller found is
the first socket's memory controller is a bogus assumption. Get rid of it.
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
channel_mask will be used in the future to determine which group of memory
modules is causing the errors since when mirroring, lockstep and close page
are enabled you can't. While that doesn't happen, use the channel_mask to
determine the channel instead of relying on the MC event/exception.
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This patch fixes the obvious bug while handling the socket/HA bitmask used in
Ivy Bridge memory controllers.
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This patch changes the way devices are searched by using product id instead of
device/function numbers. Tested in a Sandy Bridge and a Ivy Bridge machine to
make sure everything works properly.
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Haswell has a different way to retrieve RIR limits, make this procedure per
model.
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Haswell has a different way to retrieve the node id, make so this procedure
can be reimplemented.
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Haswell has different register, offset to determine memory type and supports
DDR4 in some models. This patch makes it easier to have a different method
depending on the memory controller type.
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Pull media updates from Mauro Carvalho Chehab:
"The main set of series of patches for media subsystem, including:
- document RC sysfs class
- added an API to setup scancode to allow waking up systems using the
Remote Controller
- add API for SDR devices. Drivers are still on staging
- some API improvements for getting EDID data from media
inputs/outputs
- new DVB frontend driver for drx-j (ATSC)
- one driver (it913x/it9137) got removed, in favor of an improvement
on another driver (af9035)
- added a skeleton V4L2 PCI driver at documentation
- added a dual flash driver (lm3646)
- added a new IR driver (img-ir)
- added an IR scancode decoder for the Sharp protocol
- some improvements at the usbtv driver, to allow its core to be
reused.
- added a new SDR driver (rtl2832u_sdr)
- added a new tuner driver (msi001)
- several improvements at em28xx driver to fix PM support, device
removal and to split the V4L2 specific bits into a separate
sub-driver
- one driver got converted to videobuf2 (s2255drv)
- the e4000 tuner driver now follows an improved binding model
- some fixes at V4L2 compat32 code
- several fixes and enhancements at videobuf2 code
- some cleanups at V4L2 API documentation
- usual driver enhancements, new board additions and misc fixups"
[ NOTE! This merge effective drops commit 4329b93b28 ("of: Reduce
indentation in of_graph_get_next_endpoint").
The of_graph_get_next_endpoint() function was moved and renamed by
commit fd9fdb78a9 ("[media] of: move graph helpers from
drivers/media/v4l2-core to drivers/of"). It was originally called
v4l2_of_get_next_endpoint() and lived in the file
drivers/media/v4l2-core/v4l2-of.c.
In that original location, it was then fixed to support empty port
nodes by commit b9db140c1e ("[media] v4l: of: Support empty port
nodes"), and that commit clashes badly with the dropped "Reduce
intendation" commit. I had to choose one or the other, and decided
that the "Support empty port nodes" commit was more important ]
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (426 commits)
[media] em28xx-dvb: fix PCTV 461e tuner I2C binding
Revert "[media] em28xx-dvb: fix PCTV 461e tuner I2C binding"
[media] em28xx: fix PCTV 290e LNA oops
[media] em28xx-dvb: fix PCTV 461e tuner I2C binding
[media] m88ds3103: fix bug on .set_tone()
[media] saa7134: fix WARN_ON during resume
[media] v4l2-dv-timings: add module name, description, license
[media] videodev2.h: add parenthesis around macro arguments
[media] saa6752hs: depends on CRC32
[media] si4713: fix Kconfig dependencies
[media] Sensoray 2255 uses videobuf2
[media] adv7180: free an interrupt on failure paths in init_device()
[media] e4000: make VIDEO_V4L2 dependency optional
[media] af9033: Don't export functions for the hardware filter
[media] af9035: use af9033 PID filters
[media] af9033: implement PID filter
[media] rtl2832_sdr: do not use dynamic stack allocation
[media] e4000: fix 32-bit build error
[media] em28xx-audio: make sure audio is unmuted on open()
[media] DocBook media: v4l2_format_sdr was renamed to v4l2_sdr_format
...
Pull sb_edac patches from Mauro Carvalho Chehab:
"A couple sb_edac driver improvements, cleaning a little bit the amount
of data sent to dmesg, and fixing one error message"
* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
sb_edac: mark MCE messages as KERN_DEBUG
sb_edac: use "event" instead of "exception" when MC wasnt signaled
Since the driver is decoding the MCE, it's useless to have these
messages printed unless you're debugging a problem in the driver.
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Corrected Errors are MC events, not exceptions and reporting as the
later might confuse users.
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
On a system with four Intel processors, it generates too many messages
"EDAC sbridge: Seeking for: dev 1d.3 PCI ID xxxx". And it doesn't give
many useful information for normal users, so change log level from INFO
to DEBUG.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Link: http://lkml.kernel.org/r/1392613824-11230-1-git-send-email-jiang.liu@linux.intel.com
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
There are several left overs with my old email address.
Remove their occurrences and add myself at CREDITS, to
allow people to be able to reach me on my new addresses.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Pull x86 RAS changes from Ingo Molnar:
- SCI reporting for other error types not only correctable ones
- GHES cleanups
- Add the functionality to override error reporting agents as some
machines are sporting a new extended error logging capability which,
if done properly in the BIOS, makes a corresponding EDAC module
redundant
- PCIe AER tracepoint severity levels fix
- Error path correction for the mce device init
- MCE timer fix
- Add more flexibility to the error injection (EINJ) debugfs interface
* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, mce: Fix mce_start_timer semantics
ACPI, APEI, GHES: Cleanup ghes memory error handling
ACPI, APEI: Cleanup alignment-aware accesses
ACPI, APEI, GHES: Do not report only correctable errors with SCI
ACPI, APEI, EINJ: Changes to the ACPI/APEI/EINJ debugfs interface
ACPI, eMCA: Combine eMCA/EDAC event reporting priority
EDAC, sb_edac: Modify H/W event reporting policy
EDAC: Add an edac_report parameter to EDAC
PCI, AER: Fix severity usage in aer trace event
x86, mce: Call put_device on device_register failure
* misc small enhancements/fixes all over the place.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=EJ+3
-----END PGP SIGNATURE-----
Merge tag 'edac_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC updates from Borislav Petkov:
- mpc85xx PCIe error interrupt support
- misc small enhancements/fixes all over the place.
* tag 'edac_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC: Don't try to cancel workqueue when it's never setup
e752x_edac: Fix pci_dev usage count
sb_edac: Mark get_mci_for_node_id as static
EDAC: Mark edac_create_debug_nodes as static
amd64_edac: Remove "amd64" prefix from static functions
amd64_edac: Simplify code around decode_bus_error
amd64_edac: Mark amd64_decode_bus_error as static
EDAC: Remove DEFINE_PCI_DEVICE_TABLE macro
amd64_edac: Fix condition to verify max channels allowed for F15 M30h
edac/85xx: Add PCIe error interrupt edac support
machines are sporting a new extended error logging capability which, if
done properly in the BIOS, makes a corresponding EDAC module redundant,
from Gong Chen.
* PCIe AER tracepoint severity levels fix, from Rui Wang.
* Error path correction for the mce device init, from Levente Kurusa.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=r//I
-----END PGP SIGNATURE-----
Merge tag 'ras_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp into x86/ras
Pull RAS updates from Borislav Petkov:
* Add the functionality to override error reporting agents as some
machines are sporting a new extended error logging capability which, if
done properly in the BIOS, makes a corresponding EDAC module redundant,
from Gong Chen.
* PCIe AER tracepoint severity levels fix, from Rui Wang.
* Error path correction for the mce device init, from Levente Kurusa.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch marks the function get_mci_for_node_id() as static because it
is not used outside of sb_edac.c.
Thus, it also eliminates the following warning:
drivers/edac/sb_edac.c:918:22: warning: no previous prototype for ‘get_mci_for_node_id’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Link: http://lkml.kernel.org/r/0441f508186fc4eeabc8e9c3e4dde013d99405d4.1387029387.git.rashika.kheria@gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Newer Intel platforms support more than one method to report H/W event.
On this kind of platform, H/W event report can adopt new method and
traditional EDAC method should be disabled. Moreover, if EDAC event
report method is set to *force*, it means event must be reported via
EDAC interface. IOW, it overrides the default event report policy.
Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/1386310630-12529-3-git-send-email-gong.chen@linux.intel.com
[ Boris: massage commit and error messages ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Currently, there is no other bus that has something like this macro for
their device ids. Thus, DEFINE_PCI_DEVICE_TABLE macro should be removed.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Link: http://lkml.kernel.org/r/001c01ceefb3$5724d860$056e8920$%han@samsung.com
[ Boris: swap commit message with better one. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Fix this:
In file included from drivers/edac/sb_edac.c:27:0:
drivers/edac/sb_edac.c: In function ‘sbridge_mce_output_error’:
drivers/edac/edac_core.h:50:8: warning: ‘limit’ may be used uninitialized in this function [-Wmaybe-uninitialized]
printk(level "EDAC " prefix ": " fmt, ##arg)
^
drivers/edac/sb_edac.c:948:25: note: ‘limit’ was declared here
u64 ch_addr, offset, limit, prv = 0;
Limit can be initialized to 0. The only way limit wouldn't be
initialized is if there are no DIMMs present (which would be a bug of
course) and it'd fail on the next test.
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Link: http://lkml.kernel.org/r/20131121122021.GD26009@pd.tnic
Signed-off-by: Borislav Petkov <bp@suse.de>
Pull EDAC driver updates from Mauro Carvalho Chehab:
- sb_edac: add support for Ivy Bridge support
- cell_edac: add a missing of_node_put() call
* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
cell_edac: fix missing of_node_put
sb_edac: add support for Ivy Bridge
sb_edac: avoid decoding the same error multiple times
sb_edac: rename mci_bind_devs()
sb_edac: enable multiple PCI id tables to be used
sb_edac: rework sad_pkg
sb_edac: allow different interleave lists
sb_edac: allow different dram_rule arrays
sb_edac: isolate TOHM retrieval
sb_edac: rename pci_br
sb_edac: isolate TOLM retrieval
sb_edac: make RANK_CFG_A value part of sbridge_info
Since Ivy Bridge memory controller is very similar to Sandy Bridge, it's
wiser to modify sb_edac to support both instead of creating another
driver.
[m.chehab@samsung.com: Fix CodingStyle]
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Whenever the extended error reporting is active, multiple MCEs will be
generated for the same event, which will lead to multiple repeated
errors to be reported. So check ADDRV and only decode the error if the
MCE address is valid.
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This is in preparation for Ivy Bridge support
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This is needed to allow separated PCI id tables for Sandy Bridge and Ivy
Bridge.
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This is in preparation for Ivy Bridge support
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This is in preparation for Ivy Bridge support
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This is in preparation for Ivy Bridge support
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Ivy Bridge has more than one, so rename pci_br to pci_br0
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This is in preparation for the Ivy Bridge support.
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This is in preparation of Ivy Bridge support.
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
GENMASK is used to create a contiguous bitmask([hi:lo]). It is
implemented twice in current kernel. One is in EDAC driver, the other
is in SiS/XGI FB driver. Move it to a more generic place for other
usage.
Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
The Sandy Bridge EDAC driver uses a register in the IMC_DDRIO CSR
space to determine the type of DIMMs (registered or unregistered).
But this device does not exist on some single socket Sandy Bridge
servers. While the type of DIMMs is nice to know, it is not essential
for this driver's other functions. So it seems harsh to have it
refuse to load at all when it cannot find this device.
Make the check for this device be optional. If it isn't present
just report the memory type as "MEM_UNKNOWN".
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJRFWw4AAoJEHm+PkMAQRiGnTAH/jBHA2umNc3lc7VkUpusve4q
GGIlNzYh6iuvIGwKQVj9YPsl37qtQnkDUmY8f8WxZjfxiIDw3TkRKDgNLJaM3Jy5
E426/FGlRx/Iia5+4tuBeoVYMoIPnndgW5lEAMRK1SvhTByhIYAXsaM0UwPBetb+
Z5NMdH1f1HVF7RCCmHAkzEk9z78UpdeCzI0t0XuasP2hp2ARAcE1okdO7fNaLiyo
EmenGhRvy9bAsbRwV0rCdl0rQiZXEYM353DWS7n6q4fyVm8MXFwloUxnWCJTzOIL
ZLJaz18adFj7Ip/X6ksnMQiQU2Q3B7aThs5ycv0QGxxL2rDFveYRRQ5ICrXOy3M=
=jjBc
-----END PGP SIGNATURE-----
Merge tag 'v3.8-rc7' into next
Linux 3.8-rc7
* tag 'v3.8-rc7': (12052 commits)
Linux 3.8-rc7
net: sctp: sctp_endpoint_free: zero out secret key data
net: sctp: sctp_setsockopt_auth_key: use kzfree instead of kfree
atm/iphase: rename fregt_t -> ffreg_t
ARM: 7641/1: memory: fix broken mmap by ensuring TASK_UNMAPPED_BASE is aligned
ARM: DMA mapping: fix bad atomic test
ARM: realview: ensure that we have sufficient IRQs available
ARM: GIC: fix GIC cpumask initialization
net: usb: fix regression from FLAG_NOARP code
l2tp: dont play with skb->truesize
net: sctp: sctp_auth_key_put: use kzfree instead of kfree
netback: correct netbk_tx_err to handle wrap around.
xen/netback: free already allocated memory on failure in xen_netbk_get_requests
xen/netback: don't leak pages on failure in xen_netbk_tx_check_gop.
xen/netback: shutdown the ring if it contains garbage.
drm/ttm: fix fence locking in ttm_buffer_object_transfer, 2nd try
virtio_console: Don't access uninitialized data.
net: qmi_wwan: add more Huawei devices, including E320
net: cdc_ncm: add another Huawei vendor specific device
ipv6/ip6_gre: fix error case handling in ip6gre_tunnel_xmit()
...
CONFIG_HOTPLUG is going away as an option. As a result, the __dev*
markings need to be removed.
This change removes the use of __devinit, __devexit_p, and __devexit
from these drivers.
Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.
Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Daney <david.daney@cavium.com>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sandy bridge EDAC is calculating the memory size with overflow.
Basically, the size field and the integer calculation is using 32 bits.
More bits are needed, when the DIMM memories have high density.
The net result is that memories are improperly reported there, when
high-density DIMMs are used:
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 591: mc#0: channel 0, dimm 0, -16384 Mb (-4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 591: mc#0: channel 1, dimm 0, -16384 Mb (-4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
As the number of pages value is handled at the EDAC core as unsigned
ints, the driver shows the 16 GB memories at sysfs interface as 16760832
MB! The fix is simple: calculate the number of pages as unsigned 64-bits
integer.
After the patch, the memory size (16 GB) is properly detected:
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 592: mc#0: channel 0, dimm 0, 16384 Mb (4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 592: mc#0: channel 1, dimm 0, 16384 Mb (4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* devel: (33 commits)
edac i5000, i5400: fix pointer math in i5000_get_mc_regs()
edac: allow specifying the error count with fake_inject
edac: add support for Calxeda highbank L2 cache ecc
edac: add support for Calxeda highbank memory controller
edac: create top-level debugfs directory
sb_edac: properly handle error count
i7core_edac: properly handle error count
edac: edac_mc_handle_error(): add an error_count parameter
edac: remove arch-specific parameter for the error handler
amd64_edac: Don't pass driver name as an error parameter
edac_mc: check for allocation failure in edac_mc_alloc()
edac: Increase version to 3.0.0
edac_mc: Cleanup per-dimm_info debug messages
edac: Convert debugfX to edac_dbg(X,
edac: Use more normal debugging macro style
edac: Don't add __func__ or __FILE__ for debugf[0-9] msgs
Edac: Add ABI Documentation for the new device nodes
edac: move documentation ABI to ABI/testing/sysfs-devices-edac
i7core_edac: change the mem allocation scheme to make Documentation/kobject.txt happy
edac: change the mem allocation scheme to make Documentation/kobject.txt happy
...
Instead of reporting the error count via driver-specific details,
use the new way provided by edac_mc_handle_error.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
In order to avoid loosing error events, it is desirable to group
error events together and generate a single trace for several identical
errors.
The trace API already allows reporting multiple errors. Change the
handle_error function to also allow that.
The changes at the drivers were made by this small script:
$file .=$_ while (<>);
$file =~ s/(edac_mc_handle_error)\s*\(([^\,]+)\,([^\,]+)\,/$1($2,$3, 1,/g;
print $file;
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Remove the arch-dependent parameter, as it were not used,
as the MCE tracepoint weren't implemented. It probably doesn't
make sense to have an MCE-specific tracepoint, as this will
cost more bytes at the tracepoint, and tracepoint is not free.
The changes at the EDAC drivers were done by this small perl script:
$file .=$_ while (<>);
$file =~ s/(edac_mc_handle_error)\s*\(([^\;]+)\,([^\,\)]+)\s*\)/$1($2)/g;
print $file;
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Use a more common debugging style.
Remove __FILE__ uses, add missing newlines,
coalesce formats and align arguments.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The debug macro already adds that. Most of the work here was
made by this small script:
$f .=$_ while (<>);
$f =~ s/(debugf[0-9]\s*\(\s*)__FILE__\s*": /\1"/g;
$f =~ s/(debugf[0-9]\s*\(\s*)__FILE__\s*/\1/g;
$f =~ s/(debugf[0-9]\s*\(\s*)__FILE__\s*"MC: /\1"/g;
$f =~ s/(debugf[0-9]\s*\(\")\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+)__func__\s*\,\s*/\1\2/g;
$f =~ s/(debugf[0-9]\s*\(\")\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+),\s*__func__\s*\)/\1\2)/g;
$f =~ s/(debugf[0-9]\s*\(\"MC\:\s*)\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+)__func__\s*\,\s*/\1\2/g;
$f =~ s/(debugf[0-9]\s*\(\"MC\:\s*)\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+),\s*__func__\s*\)/\1\2)/g;
$f =~ s/\"MC\: \\n\"/"MC:\\n"/g;
print $f;
After running the script, manual cleanups were done to fix it the remaining
places.
While here, removed the __LINE__ on most places, as it doesn't actually give
useful info on most places.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
As EDAC doesn't use struct device itself, it created a parent dev
pointer called as "pdev". Now that we'll be converting it to use
struct device, instead of struct devsys, this needs to be fixed.
No functional changes.
Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
On SandyBridge, DDRIOA(Dev: 17 Func: 0 Offset: 328) is used
to detect whether DIMM is RDIMM/LRDIMM, not TA(Dev: 15 Func: 0).
Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Some edac drivers register themselves as mce decoders via
notifier_chain. But in current notifier_chain implementation logic,
it doesn't accept same notifier registered twice. If so, it will be
wrong when adding/removing the element from the list. For example,
on one SandyBridge platform, remove module sb_edac and then trigger
one error, it will hit oops because it has no mce decoder registered
but related notifier_chain still points to an invalid callback
function. Here is an example:
Call Trace:
[<ffffffff8150ef6a>] atomic_notifier_call_chain+0x1a/0x20
[<ffffffff8102b936>] mce_log+0x46/0x180
[<ffffffff8102eaea>] apei_mce_report_mem_error+0x4a/0x60
[<ffffffff812e19d2>] ghes_do_proc+0x192/0x210
[<ffffffff812e2066>] ghes_proc+0x46/0x70
[<ffffffff812e20d8>] ghes_notify_sci+0x48/0x80
[<ffffffff8150ef05>] notifier_call_chain+0x55/0x80
[<ffffffff81076f1a>] __blocking_notifier_call_chain+0x5a/0x80
[<ffffffff812aea11>] ? acpi_os_wait_events_complete+0x23/0x23
[<ffffffff81076f56>] blocking_notifier_call_chain+0x16/0x20
[<ffffffff812ddc4d>] acpi_hed_notify+0x19/0x1b
[<ffffffff812b16bd>] acpi_device_notify+0x19/0x1b
[<ffffffff812beb38>] acpi_ev_notify_dispatch+0x67/0x7f
[<ffffffff812aea3a>] acpi_os_execute_deferred+0x29/0x36
[<ffffffff81069dc2>] process_one_work+0x132/0x450
[<ffffffff8106bbcb>] worker_thread+0x17b/0x3c0
[<ffffffff8106ba50>] ? manage_workers+0x120/0x120
[<ffffffff81070aee>] kthread+0x9e/0xb0
[<ffffffff81514724>] kernel_thread_helper+0x4/0x10
[<ffffffff81070a50>] ? kthread_freezable_should_stop+0x70/0x70
[<ffffffff81514720>] ? gs_change+0x13/0x13
Code: f3 49 89 d4 45 85 ed 4d 89 c6 48 8b 0f 74 48 48 85 c9 75 17 eb 41
0f 1f 80 00 00 00 00 41 83 ed 01 4c 89 f9 74 22 4d 85 ff 74 1d <4c> 8b
79 08 4c 89 e2 48 89 de 48 89 cf ff 11 4d 85 f6 74 04 41
RIP [<ffffffff8150eef6>] notifier_call_chain+0x46/0x80
RSP <ffff88042868fb20>
CR2: ffffffffa01af838
---[ end trace 0100930068e73e6f ]---
BUG: unable to handle kernel paging request at fffffffffffffff8
IP: [<ffffffff810705b0>] kthread_data+0x10/0x20
PGD 1a0d067 PUD 1a0e067 PMD 0
Oops: 0000 [#2] SMP
Only i7core_edac and sb_edac have such issues because they have more
than one memory controller which means they have to register mce
decoder many times.
Cc: <stable@vger.kernel.org> # 3.2 and upper
Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Pull EDAC internal API changes from Mauro Carvalho Chehab:
"This changeset is the first part of a series of patches that fixes the
EDAC sybsystem. On this set, it changes the Kernel EDAC API in order
to properly represent the Intel i3/i5/i7, Xeon 3xxx/5xxx/7xxx, and
Intel E5-xxxx memory controllers.
The EDAC core used to assume that:
- the DRAM chip select pin is directly accessed by the memory
controller
- when multiple channels are used, they're all filled with the
same type of memory.
None of the above premises is true on Intel memory controllers since
2002, when RAMBUS and FB-DIMMs were introduced, and Advanced Memory
Buffer or by some similar technologies hides the direct access to the
DRAM pins.
So, the existing drivers for those chipsets had to lie to the EDAC
core, in general telling that just one channel is filled. That
produces some hard to understand error messages like:
EDAC MC0: CE row 3, channel 0, label "DIMM1": 1 Unknown error(s): memory read error on FATAL area : cpu=0 Err=0008:00c2 (ch=2), addr = 0xad1f73480 => socket=0, Channel=0(mask=2), rank=1
The location information there (row3 channel 0) is completely bogus:
it has no physical meaning, and are just some random values that the
driver uses to talk with the EDAC core. The error actually happened
at CPU socket 0, channel 0, slot 1, but this is not reported anywhere,
as the EDAC core doesn't know anything about the memory layout. So,
only advanced users that know how the EDAC driver works and that tests
their systems to see how DIMMs are mapped can actually benefit for
such error logs.
This patch series fixes the error report logic, in order to allow the
EDAC to expose the memory architecture used by them to the EDAC core.
So, as the EDAC core now understands how the memory is organized, it
can provide an useful report:
EDAC MC0: CE memory read error on DIMM1 (channel:0 slot:1 page:0x364b1b offset:0x600 grain:32 syndrome:0x0 - count:1 area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:4)
The location of the DIMM where the error happened is reported by "MC0"
(cpu socket #0), at "channel:0 slot:1" location, and matches the
physical location of the DIMM.
There are two remaining issues not covered by this patch series:
- The EDAC sysfs API will still report bogus values. So,
userspace tools like edac-utils will still use the bogus data;
- Add a new tracepoint-based way to get the binary information
about the errors.
Those are on a second series of patches (also at -next), but will
probably miss the train for 3.5, due to the slow review process."
Fix up trivial conflict (due to spelling correction of removed code) in
drivers/edac/edac_device.c
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: (42 commits)
i7core: fix ranks information at the per-channel struct
i5000: Fix the fatal error handling
i5100_edac: Fix a warning when compiled with 32 bits
i82975x_edac: Test nr_pages earlier to save a few CPU cycles
e752x_edac: provide more info about how DIMMS/ranks are mapped
i5000_edac: Fix the logic that retrieves memory information
i5400_edac: improve debug messages to better represent the filled memory
edac: Cleanup the logs for i7core and sb edac drivers
edac: Initialize the dimm label with the known information
edac: Remove the legacy EDAC ABI
x38_edac: convert driver to use the new edac ABI
tile_edac: convert driver to use the new edac ABI
sb_edac: convert driver to use the new edac ABI
r82600_edac: convert driver to use the new edac ABI
ppc4xx_edac: convert driver to use the new edac ABI
pasemi_edac: convert driver to use the new edac ABI
mv64x60_edac: convert driver to use the new edac ABI
mpc85xx_edac: convert driver to use the new edac ABI
i82975x_edac: convert driver to use the new edac ABI
i82875p_edac: convert driver to use the new edac ABI
...
Remove some information that it is duplicated at the MCE log,
and don't have much usage for the error. Those data will be
added again, when creating a trace function that outputs both
memory errors and MCE fields.
Cc: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Now that all drivers got converted to use the new ABI, we can
drop the old one.
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The number of pages is a dimm property. Move it to the dimm struct.
After this change, it is possible to add sysfs nodes for the DIMM's that
will properly represent the DIMM stick properties, including its size.
A TODO fix here is to properly represent dual-rank/quad-rank DIMMs when
the memory controller represents the memory via chip select rows.
Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Acked-by: Borislav Petkov <borislav.petkov@amd.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Almost all edac drivers initialize csrow_info->first_page,
csrow_info->last_page and csrow_info->page_mask. Those vars are
used inside the EDAC core, in order to calculate the csrow affected
by an error, by using the routine edac_mc_find_csrow_by_page().
However, very few drivers actually use it:
e752x_edac.c
e7xxx_edac.c
i3000_edac.c
i82443bxgx_edac.c
i82860_edac.c
i82875p_edac.c
i82975x_edac.c
r82600_edac.c
There also a few other drivers that have their own calculus
formula internally using those vars.
All the others are just wasting time by initializing those
data.
While initializing data without using them won't cause any troubles, as
those information is stored at the wrong place (at csrows structure), it
is better to remove what is unused, in order to simplify the next patch.
Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Acked-by: Borislav Petkov <borislav.petkov@amd.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
On systems based on chip select rows, all channels need to use memories
with the same properties, otherwise the memories on channels A and B
won't be recognized.
However, such assumption is not true for all types of memory
controllers.
Controllers for FB-DIMM's don't have such requirements.
Also, modern Intel controllers seem to be capable of handling such
differences.
So, we need to get rid of storing the DIMM information into a per-csrow
data, storing it, instead at the right place.
The first step is to move grain, mtype, dtype and edac_mode to the
per-dimm struct.
Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: James Bottomley <James.Bottomley@parallels.com>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: Mike Williams <mike@mikebwilliams.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The way a DIMM is currently represented implies that they're
linked into a per-csrow struct. However, some drivers don't see
csrows, as they're ridden behind some chip like the AMB's
on FBDIMM's, for example.
This forced drivers to fake^Wvirtualize a csrow struct, and to create
a mess under csrow/channel original's concept.
Move the DIMM labels into a per-DIMM struct, and add there
the real location of the socket, in terms of csrow/channel.
Latter patches will modify the location to properly represent the
memory architecture.
All other drivers will use a per-csrow type of location.
Some of those drivers will require a latter conversion, as
they also fake the csrows internally.
TODO: While this patch doesn't change the existing behavior, on
csrows-based memory controllers, a csrow/channel pair points to a memory
rank. There's a known bug at the EDAC core that allows having different
labels for the same DIMM, if it has more than one rank. A latter patch
is need to merge the several ranks for a DIMM into the same dimm_info
struct, in order to avoid having different labels for the same DIMM.
The edac_mc_alloc() will now contain a per-dimm initialization loop that
will be changed by latter patches in order to match other types of
memory architectures.
Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Pull EDAC fixes from Mauro Carvalho Chehab:
"A series of EDAC driver fixes. It also has one core fix at the
documentation, and a rename patch, fixing the name of the struct that
contains the rank information."
* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
edac: rename channel_info to rank_info
i5400_edac: Avoid calling pci_put_device() twice
edac: i5100 ack error detection register after each read
edac: i5100 fix erroneous define for M1Err
edac: sb_edac: Fix a wrong value setting for the previous value
edac: sb_edac: Fix a INTERLEAVE_MODE() misuse
edac: sb_edac: Let the driver depend on PCI_MMCONFIG
edac: Improve the comments to better describe the memory concepts
edac/ppc4xx_edac: Fix compilation
Fix sb_edac compilation with 32 bits kernels
>From the driver design, the variable limit wants to compare with its
previous value, we should set the value of limit instead of the value
of tmp_mb to the variable prev.
Signed-off-by: Hui Wang <jason77.wang@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
We can identify dram interleave mode from the Dram Rule register
rather than Dram Interleave list register.
In this context, the reg of INTERLEAVE_MODE(reg) contains the Dram
Interleave list register, we can't get interleave mode from the reg,
while the variable interleave_mode saves the the mode got from the
Dram Rule register, so we use the variable to replace
INTERLEAVE_MDDE(reg) here.
Signed-off-by: Hui Wang <jason77.wang@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
These const tables are currently marked __devinitdata, but
Documentation/PCI/pci.txt says:
"o The ID table array should be marked __devinitconst; this is done
automatically if the table is declared with DEFINE_PCI_DEVICE_TABLE()."
So use DEFINE_PCI_DEVICE_TABLE(x).
Based on PaX and earlier work by Andi Kleen.
Signed-off-by: Lionel Debroux <lionel_debroux@yahoo.fr>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Several fields in struct cpuinfo_x86 were not defined for the
!SMP case, likely to save space. However, those fields still
have some meaning for UP, and keeping them allows some #ifdef
removal from other files. The additional size of the UP kernel
from this change is not significant enough to worry about
keeping up the distinction:
text data bss dec hex filename
4737168 506459 972040 6215667 5ed7f3 vmlinux.o.before
4737444 506459 972040 6215943 5ed907 vmlinux.o.after
for a difference of 276 bytes for an example UP config.
If someone wants those 276 bytes back badly then it should
be implemented in a cleaner way.
Signed-off-by: Kevin Winchester <kjwinchester@gmail.com>
Cc: Steffen Persvold <sp@numascale.com>
Link: http://lkml.kernel.org/r/1324428742-12498-1-git-send-email-kjwinchester@gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
No functionality change, this is done so that in a follow-on patch all
queued-up MCEs can be decoded after registering on the chain.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
The edac driver for Sandy Bridge was found to be reporting "FPM"
for edac_mode, which clearly doesn't make sense. It was found that
sb_edac.c:get_dimm_config was reusing a variable for both mem_type
and edac_type, and thus was overwriting the value after setting
it correctly. This patch fixes that issue.
Before the patch:
/sys/devices/system/edac/mc/mc0/csrow0/edac_mode:FPM
/sys/devices/system/edac/mc/mc0/csrow1/edac_mode:FPM
/sys/devices/system/edac/mc/mc0/csrow2/edac_mode:FPM
/sys/devices/system/edac/mc/mc0/csrow3/edac_mode:FPM
After:
/sys/devices/system/edac/mc/mc0/csrow0/edac_mode:S4ECD4ED
/sys/devices/system/edac/mc/mc0/csrow1/edac_mode:S4ECD4ED
/sys/devices/system/edac/mc/mc0/csrow2/edac_mode:S4ECD4ED
/sys/devices/system/edac/mc/mc0/csrow3/edac_mode:S4ECD4ED
Signed-off-by: Mark A. Grondona <mgrondona@llnl.gov>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Some changes on it were required due to changeset cd90cc84c6bf0, that
changed the glue with the MCE logic.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This driver is known to work on mine and Tony's test environments,
using software error injection, and a partial hardware/software
error injection tool.
There's no broader range test yet to double check if the error decoding
logic will actually point to the right DIMM, so use it with care.
More tests are required to be sure that the driver will work on all
different types of memory configurations.
If you're willing to risk using it, I suggest you to enable EDAC debugs
for your test machines, as the debug logs helps to track what's going
inside the driver.
Please feed me with bug reports, if you notice that the driver
is miss-behaving.
Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Linus Torvalds